API tools faq
paste
Guest User

Untitled

a guest
Jun 1st, 2014
255
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 57.84 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.4.88-franco.Kernel (francisco@ubuntu) (gcc version 4.7 (GCC) ) #52 SMP PREEMPT Sat May 31 13:43:19 WEST 2014
  4. [ 0.000000] CPU: ARMv7 Processor [512f06f0] revision 0 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  6. [ 0.000000] Machine: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree), model: LGE MSM 8974 HAMMERHEAD
  7. [ 0.000000] qcom,ion-heap@28 reserved EBI1 size 614000
  8. [ 0.000000] qcom,mdss_fb_primary reserved EBI1 size 1000000
  9. [ 0.000000] qcom,msm-contig-mem reserved EBI1 size 280000
  10. [ 0.000000] Node qcom,msm-mem-hole removed memory 7b00000-ff00000
  11. [ 0.000000] memory pool 3 (start 0x7e700000 size 1900000) initialized
  12. [ 0.000000] Hardboot page reserved at 0x10100000
  13. [ 0.000000] PERSIST RAM CONSOLE START ADDR : 0x10000000
  14. [ 0.000000] Initialized persistent memory from 10000000-100fffff
  15. [ 0.000000] cma: CMA: reserved 16 MiB at 36c00000
  16. [ 0.000000] cma: Found secure_region, memory base 0, size 252 MiB
  17. [ 0.000000] cma: CMA: reserved 252 MiB at 6e800000
  18. [ 0.000000] cma: Found adsp_region, memory base 0, size 32 MiB
  19. [ 0.000000] cma: CMA: reserved 32 MiB at 6c800000
  20. [ 0.000000] cma: Found qsecom_region, memory base 0, size 17 MiB
  21. [ 0.000000] cma: CMA: reserved 20 MiB at 6b400000
  22. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  23. [ 0.000000] IMEM DT static mapping successful
  24. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c22a1000 s15296 r8192 d13376 u36864
  25. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 479744
  26. [ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=hammerhead user_debug=31 msm_watchdog_v2.enable=1 uart_console=enable lcd_maker_id=primary lge.hreset=off lge.reset=unknown gpt=enable lge.kcal=0|0|0|x lge.rev=rev_11 androidboot.laf androidboot.emmc=true androidboot.serialno=03c94607f0b3bcfa androidboot.bootloader=HHZ11k androidboot.baseband=msm bootreason=reboot androidboot.hardware.sku=D821 androidboot.hardware.ddr=hynix androidboot.hardware.display=orise
  27. [ 0.000000] UART CONSOLE : enable
  28. [ 0.000000] kcal is 0|0|0|x
  29. [ 0.000000] kcal not calibrated yet : 120
  30. [ 0.000000] BOARD : LGE rev_11
  31. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  32. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  33. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  34. [ 0.000000] Memory: 123MB 2MB 1765MB = 1890MB total
  35. [ 0.000000] Memory: 1571512k/1571512k available, 390472k reserved, 846848K highmem
  36. [ 0.000000] Virtual kernel memory layout:
  37. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  38. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  39. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  40. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  41. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  42. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  43. [ 0.000000] .text : 0xc0008000 - 0xc0dfe000 (14296 kB)
  44. [ 0.000000] .init : 0xc0e00000 - 0xc0f30bc0 (1219 kB)
  45. [ 0.000000] .data : 0xc0f32000 - 0xc0f74ce0 ( 268 kB)
  46. [ 0.000000] .bss : 0xc100db20 - 0xc1256184 (2338 kB)
  47. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-0, MinObjects=0, CPUs=4, Nodes=1
  48. [ 0.000000] Preemptible hierarchical RCU implementation.
  49. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  50. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
  51. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  52. [ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
  53. [ 0.000000] Switching to timer-based delay loop
  54. [ 0.000000] Console: colour dummy device 80x30
  55. [ 0.000091] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  56. [ 0.000115] pid_max: default: 32768 minimum: 301
  57. [ 0.000246] Security Framework initialized
  58. [ 0.000264] SELinux: Initializing.
  59. [ 0.000354] Mount-cache hash table entries: 512
  60. [ 0.044892] Initializing cgroup subsys cpuacct
  61. [ 0.044909] Initializing cgroup subsys freezer
  62. [ 0.044922] Initializing cgroup subsys blkio
  63. [ 0.044985] CPU: Testing write buffer coherency: ok
  64. [ 0.045024] ftrace: allocating 30367 entries in 90 pages
  65. [ 0.155134] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  66. [ 0.155933] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  67. [ 0.159150] Setting up static identity map for 0xa70480 - 0xa70508
  68. [ 0.159167] MSM Memory Dump table set up
  69. [ 0.161084] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  70. [ 0.162082] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  71. [ 0.163052] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  72. [ 0.163240] Brought up 4 CPUs
  73. [ 0.163256] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  74. [ 0.175945] dummy:
  75. [ 0.189982] NET: Registered protocol family 16
  76. [ 0.192800] DMA: preallocated 256 KiB pool for atomic coherent allocations
  77. [ 0.194364] socinfo_print: v8, id=126, ver=2.2, raw_id=1968, raw_ver=7, hw_plat=150, hw_plat_ver=65536
  78. [ 0.194372] accessory_chip=0, hw_plat_subtype=0, pmic_model=65537, pmic_die_revision=196609
  79. [ 0.207482] gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
  80. [ 0.222178] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
  81. [ 0.239866] 8841_s1: 675 <--> 1050 mV at 0 mV normal idle
  82. [ 0.240272] 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle
  83. [ 0.240666] 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle
  84. [ 0.241096] 8841_s2: 500 <--> 1050 mV at 0 mV normal idle
  85. [ 0.241514] 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle
  86. [ 0.241927] 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  87. [ 0.242331] 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  88. [ 0.242761] 8841_s3: 1050 mV normal idle
  89. [ 0.243186] 8841_s4: 675 <--> 815 mV at 0 mV normal idle
  90. [ 0.243590] 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle
  91. [ 0.244013] 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  92. [ 0.244442] 8941_s1: 1300 mV normal idle
  93. [ 0.244876] 8941_s2: 2150 mV normal idle
  94. [ 0.245309] 8941_s3: 1800 mV normal idle
  95. [ 0.245777] 8941_l1: 1225 mV normal idle
  96. [ 0.246202] 8941_l2: 1200 mV normal idle
  97. [ 0.246636] 8941_l3: 1225 mV normal idle
  98. [ 0.247075] 8941_l4: 1225 mV normal idle
  99. [ 0.247508] 8941_l5: 1800 mV normal idle
  100. [ 0.247971] 8941_l6: 1800 mV normal idle
  101. [ 0.248394] 8941_l7: 1800 mV normal idle
  102. [ 0.248818] 8941_l8: 1800 mV normal idle
  103. [ 0.249243] 8941_l9: 1800 <--> 2950 mV at 2950 mV normal idle
  104. [ 0.249662] 8941_l10: 1800 <--> 2950 mV at 2950 mV normal idle
  105. [ 0.250093] 8941_l11: 1300 mV normal idle
  106. [ 0.250509] 8941_l12: 1800 mV normal idle
  107. [ 0.250902] 8941_l12_ao: 1800 mV normal idle
  108. [ 0.251336] 8941_l13: 1800 <--> 2950 mV at 2950 mV normal idle
  109. [ 0.251765] 8941_l14: 1800 mV normal idle
  110. [ 0.252195] 8941_l15: 2050 mV normal idle
  111. [ 0.252630] 8941_l16: 2700 mV normal idle
  112. [ 0.253057] 8941_l17: 3000 mV normal idle
  113. [ 0.253487] 8941_l18: 2850 mV normal idle
  114. [ 0.253910] 8941_l19: 3000 <--> 3300 mV at 3300 mV normal idle
  115. [ 0.254334] 8941_l20: 2950 mV normal idle
  116. [ 0.254765] 8941_l21: 2950 mV normal idle
  117. [ 0.255199] 8941_l22: 3000 <--> 3300 mV at 3100 mV normal idle
  118. [ 0.255673] 8941_l23: 3000 mV normal idle
  119. [ 0.256108] 8941_l24: 3075 mV normal idle
  120. [ 0.256530] 8941_lvs1:
  121. [ 0.256930] 8941_lvs2:
  122. [ 0.257310] 8941_lvs3:
  123. [ 0.259360] PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 1/4
  124. [ 0.259374] PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 1/4
  125. [ 0.259673] krait0: 500 <--> 1200 mV at 900 mV fast normal idle
  126. [ 0.260161] krait1: 500 <--> 1200 mV at 900 mV fast normal idle
  127. [ 0.260635] krait2: 500 <--> 1200 mV at 900 mV fast normal idle
  128. [ 0.261104] krait3: 500 <--> 1200 mV at 900 mV fast normal idle
  129. [ 0.290959] persistent_ram: found existing buffer, size 232980, start 79864
  130. [ 0.753558] console [ram-1] enabled
  131. [ 0.753735] persistent_ram: found existing buffer, size 0, start 0
  132. [ 0.754081] wifi: bcm_init_wlan_mem: WIFI MEM Allocated
  133. [ 0.754158] bcm_wifi_init_gpio_mem: wifi gpio and mem initialized
  134. [ 0.754379] LCD_KCAL_DEBUG : lge_add_lcd_kcal_devices
  135. [ 0.754576] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  136. [ 0.754715] hw-breakpoint: maximum watchpoint size is 8 bytes.
  137. [ 0.756443] gpiochip_add: registered GPIOs 1020 to 1023 on device: pm8841-mpp
  138. [ 0.758137] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xd0 incorrect owner 4
  139. [ 0.758354] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xd1 incorrect owner 4
  140. [ 0.758661] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xd4 incorrect owner 4
  141. [ 0.759331] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xdb incorrect owner 2
  142. [ 0.759651] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xde incorrect owner 2
  143. [ 0.760261] gpiochip_add: registered GPIOs 984 to 1019 on device: pm8941-gpio
  144. [ 0.761683] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa2 incorrect owner 2
  145. [ 0.762236] gpiochip_add: registered GPIOs 977 to 983 on device: pm8941-mpp
  146. [ 0.763040] 8941_boost: 5000 mV
  147. [ 0.763611] 8941_mvs1:
  148. [ 0.763762] 8941_mvs1: supplied by 8941_boost
  149. [ 0.764335] 8941_mvs2:
  150. [ 0.764441] 8941_mvs2: supplied by 8941_boost
  151. [ 0.768131] qpnp_adcmap_probe: Use adcmap from dt
  152. [ 0.768839] sps:BAM 0xf9984000 (va:0xf00e0000) enabled: ver:0x6, number of pipes:20
  153. [ 0.768920] sps:BAM 0xf9984000 is registered.
  154. [ 0.769062] sps:sps is ready.
  155. [ 0.771294] gdsc_venus:
  156. [ 0.771722] gdsc_mdss:
  157. [ 0.772112] gdsc_jpeg:
  158. [ 0.772557] gdsc_vfe:
  159. [ 0.772911] gdsc_oxili_gx:
  160. [ 0.773046] gdsc_oxili_gx: supplied by 8841_s4_corner
  161. [ 0.773696] gdsc_oxili_cx:
  162. [ 0.774020] gdsc_usb_hsic:
  163. [ 0.774674] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  164. [ 0.780341] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr f0400000
  165. [ 0.780971] Physical OCMEM zone layout:
  166. [ 0.781115] zone graphics : 0xfec00000 - 0xfecfffff (1024 KB)
  167. [ 0.781196] zone lp_audio : 0xfed00000 - 0xfed7ffff ( 512 KB)
  168. [ 0.781336] zone video : 0xfed00000 - 0xfed7ffff ( 512 KB)
  169. [ 0.803580] bio: create slab <bio-0> at 0
  170. [ 0.804514] ethernet_phy:
  171. [ 0.805018] avdd-3p3:
  172. [ 0.805391] vdd-1p0:
  173. [ 0.806247] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
  174. [ 0.806449] ION-heap mm: Cannot specify alignment for this type of heap
  175. [ 0.806591] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
  176. [ 0.806795] ION-heap adsp: Cannot specify alignment for this type of heap
  177. [ 0.807060] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
  178. [ 0.807485] ION heap vmalloc created
  179. [ 0.807663] ION heap kmalloc created
  180. [ 0.807811] ION heap mm created
  181. [ 0.807901] ION heap adsp created
  182. [ 0.807994] ION heap iommu created
  183. [ 0.808089] ION heap qsecom created
  184. [ 0.808259] ION heap audio created at 0x7e701000 with size 614000
  185. [ 0.809571] SCSI subsystem initialized
  186. [ 0.809835] usbcore: registered new interface driver usbfs
  187. [ 0.809983] usbcore: registered new interface driver hub
  188. [ 0.810214] usbcore: registered new device driver usb
  189. [ 0.811171] Linux media interface: v0.10
  190. [ 0.811284] Linux video capture interface: v2.00
  191. [ 0.812032] PMIC@SID0 Power-on reason: Triggered from Hard Reset
  192. [ 0.812312] input: qpnp_pon as /devices/virtual/input/input0
  193. [ 0.812648] qcom,qpnp-power-on qpnp-clkdiv-ee260400: No PON config. specified
  194. [ 0.812736] qcom,qpnp-power-on: probe of qpnp-clkdiv-ee260400 failed with error -22
  195. [ 0.812891] qcom,qpnp-power-on qpnp-clkdiv-ee260600: No PON config. specified
  196. [ 0.813035] qcom,qpnp-power-on: probe of qpnp-clkdiv-ee260600 failed with error -22
  197. [ 0.813133] qcom,qpnp-power-on qpnp-clkdiv-ee260800: No PON config. specified
  198. [ 0.813278] qcom,qpnp-power-on: probe of qpnp-clkdiv-ee260800 failed with error -22
  199. [ 0.815502] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at f01e0000, with 3 ctx banks
  200. [ 0.816645] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at f0280000, with 3 ctx banks
  201. [ 0.818444] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at f02a0000, with 5 ctx banks
  202. [ 0.819384] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at f02c0000, with 2 ctx banks
  203. [ 0.820485] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at f02e0000, with 3 ctx banks
  204. [ 0.821577] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
  205. [ 0.821769] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
  206. [ 0.822016] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
  207. [ 0.822273] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
  208. [ 0.822466] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
  209. [ 0.822706] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
  210. [ 0.822961] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
  211. [ 0.823159] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
  212. [ 0.823400] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
  213. [ 0.823646] msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
  214. [ 0.823919] msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
  215. [ 0.824115] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
  216. [ 0.824358] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
  217. [ 0.824613] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
  218. [ 0.824799] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
  219. [ 0.825044] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
  220. [ 0.826184] Advanced Linux Sound Architecture Driver Version 1.0.25.
  221. [ 0.826749] Bluetooth: Core ver 2.16
  222. [ 0.826933] NET: Registered protocol family 31
  223. [ 0.827008] Bluetooth: HCI device and connection manager initialized
  224. [ 0.827144] Bluetooth: HCI socket layer initialized
  225. [ 0.827220] Bluetooth: L2CAP socket layer initialized
  226. [ 0.827500] Bluetooth: SCO socket layer initialized
  227. [ 0.827889] cfg80211: Calling CRDA to update world regulatory domain
  228. [ 0.829140] Switching to clocksource arch_sys_counter
  229. [ 0.859194] NET: Registered protocol family 2
  230. [ 0.859494] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  231. [ 0.860053] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  232. [ 0.861307] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  233. [ 0.861933] TCP: Hash tables configured (established 131072 bind 65536)
  234. [ 0.862069] TCP: reno registered
  235. [ 0.862153] UDP hash table entries: 512 (order: 2, 16384 bytes)
  236. [ 0.862245] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  237. [ 0.862565] NET: Registered protocol family 1
  238. [ 0.862913] Trying to unpack rootfs image as initramfs...
  239. [ 0.891477] Freeing initrd memory: 500K
  240. [ 0.891573] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 0
  241. [ 0.894986] Detected 9 counters on the L2CC PMU.
  242. [ 0.896678] gpiochip_add: registered GPIOs 945 to 976 on device: smp2p
  243. [ 0.897398] gpiochip_add: registered GPIOs 913 to 944 on device: smp2p
  244. [ 0.897634] gpiochip_add: registered GPIOs 881 to 912 on device: smp2p
  245. [ 0.898294] gpiochip_add: registered GPIOs 849 to 880 on device: smp2p
  246. [ 0.898537] gpiochip_add: registered GPIOs 817 to 848 on device: slave-kernel
  247. [ 0.899213] gpiochip_add: registered GPIOs 785 to 816 on device: master-kernel
  248. [ 0.899519] gpiochip_add: registered GPIOs 753 to 784 on device: smp2p
  249. [ 0.900267] gpiochip_add: registered GPIOs 721 to 752 on device: smp2p
  250. [ 0.900451] gpiochip_add: registered GPIOs 689 to 720 on device: slave-kernel
  251. [ 0.901221] gpiochip_add: registered GPIOs 657 to 688 on device: master-kernel
  252. [ 0.901420] gpiochip_add: registered GPIOs 625 to 656 on device: smp2p
  253. [ 0.902198] gpiochip_add: registered GPIOs 593 to 624 on device: smp2p
  254. [ 0.902443] gpiochip_add: registered GPIOs 561 to 592 on device: slave-kernel
  255. [ 0.903181] gpiochip_add: registered GPIOs 529 to 560 on device: master-kernel
  256. [ 0.905132] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
  257. [ 0.908917] pil_venus fdce0000.qcom,venus: using secure boot
  258. [ 0.913658] NET: Registered protocol family 27
  259. [ 0.921211] acpuclk-8974 qcom,acpuclk.30: SPEED BIN: 1
  260. [ 0.921353] acpuclk-8974 qcom,acpuclk.30: ACPU PVS: 1
  261. [ 0.925236] acpuclk-8974 qcom,acpuclk.30: CPU Frequencies Supported: 21
  262. [ 0.928110] msm_rpm_log_probe: OK
  263. [ 0.932830] ocmem: Client sensors (id: 6) not allowed to use OCMEM
  264. [ 0.932970] OCMEM notifier registration failed
  265. [ 0.933046] sns_ocmem_main: sns_ocmem_init failed -14
  266. [ 0.934592] bluetooth_rfkill_init
  267. [ 0.935019] bluetooth_rfkill_init done
  268. [ 0.935233] bluetooth_rfkill_probe
  269. [ 0.935317] bluetooth_set_power set blocked=1
  270. [ 0.935452] Bluetooth RESET LOW!!
  271. [ 0.936246] mpm_counter: [ 0.936239]:(135968)
  272. [ 0.938889] highmem bounce pool size: 64 pages
  273. [ 0.954083] NTFS driver 2.1.30 [Flags: R/W].
  274. [ 0.954897] fuse init (API version 7.18)
  275. [ 0.955655] msgmni has been set to 1448
  276. [ 0.962368] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  277. [ 0.962582] io scheduler noop registered
  278. [ 0.962929] io scheduler deadline registered (default)
  279. [ 0.963158] io scheduler row registered
  280. [ 0.963788] io scheduler cfq registered
  281. [ 0.964234] lm3630_parse_dt: max_current =0x12 min_brightness = 0x3 max_brightness = 0xFF default_brightness = 0x20
  282. [ 0.964608] lm3630_parse_dt: boost_ctrl_reg = 0x30 bank_sel = 0 linear_map = 1 pwm_enable = 0 blmap_size = 0
  283. [ 0.965623] lm3630_probe: lm3630 probed
  284. [ 0.967731] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xf0340000
  285. [ 0.968149] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xf029e000
  286. [ 0.969580] mdss_mdp_pp_argc: >>>>> mdss_mdp_pp_argc
  287. [ 0.969949] update_preset_lcdc_lut: update_preset_lcdc_lut red=[255], green=[255], blue=[255]
  288. [ 0.970311] mdss_mdp_pp_argc_kcal: >>>>> mdss_mdp_pp_argc_kcal
  289. [ 0.976357] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  290. [ 0.976812] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
  291. [ 0.978955] mdss_dsi_panel_probe: Panel Name = JDI 1080p command mode dsi panel
  292. [ 0.979401] mdss_panel_parse_dt: Panel ID = 5
  293. [ 0.980888] mdss_dsi_retrieve_ctrl_resources: dsi base=f0320800 size=600
  294. [ 0.982723] dsi_panel_device_register:1194 Continuous splash flag enabled.
  295. [ 1.010406] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
  296. [ 1.011324] mdss_hw_init: MDP Rev=10020000
  297. [ 1.016427] hdmi_tx_init_resource: 'core_physical': start = 0xf0322100, len=0x370
  298. [ 1.016824] hdmi_tx_init_resource: 'phy_physical': start = 0xf0324500, len=0x7c
  299. [ 1.017213] hdmi_tx_init_resource: 'qfprom_physical': start = 0xf0328000, len=0x60f0
  300. [ 1.019639] mdss_register_panel: adding framebuffer device fd922100.qcom,hdmi_tx
  301. [ 1.028903] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.2
  302. [ 1.032319] mdss_fb_alloc_fbmem_iommu: mdss_fb_alloc_fbmem_iommu frame buffer reserve_size=0x1000000
  303. [ 1.033587] mdss_fb_alloc_fbmem_iommu: allocating 16777216 bytes at f1000000 (7ee00000 phys) for fb 0
  304. [ 1.034123] mdss_fb_register: FrameBuffer[0] 1080x1920 size=16777216 registered successfully!
  305. [ 1.035407] mdss_fb_register: FrameBuffer[1] 640x480 size=0 registered successfully!
  306. [ 1.036522] mdss_fb_register: FrameBuffer[2] 1920x1080 size=0 registered successfully!
  307. [ 1.037633] avdd-3p3: Failed to create debugfs directory
  308. [ 1.037729] anx7808 anx7808_vdd_1p0_power: vdd 1.0V is already off
  309. [ 1.039240] sps: BAM device 0xf9944000 is not registered yet.
  310. [ 1.039528] sps:BAM 0xf9944000 is registered.
  311. [ 1.039729] msm_serial_hs: BAM device registered. bam_handle=0x0
  312. [ 1.044542] f9960000.uart: ttyHS99 at MMIO 0xf9960000 (irq = 148) is a MSM HS UART
  313. [ 1.047748] msm_serial_hs module loaded
  314. [ 1.056261] diagchar initialized now
  315. [ 1.063480] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  316. [ 1.069407] vdd-1p0: Failed to create debugfs directory
  317. [ 1.083691] brd: module loaded
  318. [ 1.089360] anx7808 sp_tx_hardware_poweron: anx7808 power on
  319. [ 1.090480] anx7808 sp_tx_chip_located: ANX7808 BA is found.
  320. [ 1.092170] anx7808 sp_tx_vbus_powerdown: 3.3V output disabled
  321. [ 1.092377] loop: module loaded
  322. [ 1.092716] i2c-core: driver [isa1200] using legacy suspend method
  323. [ 1.093076] i2c-core: driver [isa1200] using legacy resume method
  324. [ 1.094883] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
  325. [ 1.095094] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
  326. [ 1.095460] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
  327. [ 1.095943] QSEECOM: qseecom_probe: secure app region addr=0x7b00000 size=0x500000
  328. [ 1.098406] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  329. [ 1.098787] i2c-core: driver [tabla-i2c-core] using legacy resume method
  330. [ 1.099518] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
  331. [ 1.099725] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
  332. [ 1.101220] SCSI Media Changer driver v0.25
  333. [ 1.103094] spi_qsd f9966000.spi: master is unqueued, this is deprecated
  334. [ 1.107075] tun: Universal TUN/TAP device driver, 1.6
  335. [ 1.107280] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  336. [ 1.107665] rmnet_init: BAM devices[8]
  337. [ 1.136002] PPP generic driver version 2.4.2
  338. [ 1.136643] PPP BSD Compression module registered
  339. [ 1.136848] PPP Deflate Compression module registered
  340. [ 1.138805] PPP MPPE Compression module registered
  341. [ 1.139016] NET: Registered protocol family 24
  342. [ 1.139269] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  343. [ 1.139704] CSLIP: code copyright 1989 Regents of the University of California.
  344. [ 1.140210] usbcore: registered new interface driver catc
  345. [ 1.140525] usbcore: registered new interface driver kaweth
  346. [ 1.140884] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  347. [ 1.141353] usbcore: registered new interface driver pegasus
  348. [ 1.141678] usbcore: registered new interface driver rtl8150
  349. [ 1.142031] hso: drivers/net/usb/hso.c: Option Wireless
  350. [ 1.142390] usbcore: registered new interface driver hso
  351. [ 1.142722] usbcore: registered new interface driver asix
  352. [ 1.143190] usbcore: registered new interface driver cdc_ether
  353. [ 1.143504] usbcore: registered new interface driver cdc_eem
  354. [ 1.143969] usbcore: registered new interface driver dm9601
  355. [ 1.144327] usbcore: registered new interface driver smsc75xx
  356. [ 1.144825] usbcore: registered new interface driver smsc95xx
  357. [ 1.145139] usbcore: registered new interface driver gl620a
  358. [ 1.145608] usbcore: registered new interface driver net1080
  359. [ 1.145923] usbcore: registered new interface driver plusb
  360. [ 1.146395] usbcore: registered new interface driver rndis_host
  361. [ 1.146726] usbcore: registered new interface driver cdc_subset
  362. [ 1.147205] usbcore: registered new interface driver zaurus
  363. [ 1.147672] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  364. [ 1.148261] usbcore: registered new interface driver int51x1
  365. [ 1.148733] usbcore: registered new interface driver kalmia
  366. [ 1.149052] usbcore: registered new interface driver ipheth
  367. [ 1.149359] anx7808 sp_tx_hardware_powerdown: anx7808 power down
  368. [ 1.149369] anx7808 sp_tx_set_sys_state: SP_TX To System State:
  369. [ 1.149377] anx7808 sp_tx_set_sys_state: STATE_CABLE_PLUG
  370. [ 1.150583] usbcore: registered new interface driver sierra_net
  371. [ 1.151244] usbcore: registered new interface driver cx82310_eth
  372. [ 1.151566] usbcore: registered new interface driver cdc_ncm
  373. [ 1.152036] usbcore: registered new interface driver qmi_wwan
  374. [ 1.198503] msm-dwc3 msm_dwc3: Read platform data for adc low threshold
  375. [ 1.198875] msm-dwc3 msm_dwc3: Read platform data for adc high threshold
  376. [ 1.209625] bcm2079x 0-0077: requesting IRQ 360
  377. [ 1.210148] bcm2079x 0-0077: bcm2079x_probe, probing bcm2079x driver exited successfully
  378. [ 1.424177] usbcore: registered new interface driver cdc_acm
  379. [ 1.424387] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  380. [ 1.424902] usbcore: registered new interface driver usblp
  381. [ 1.425233] usbcore: registered new interface driver cdc_wdm
  382. [ 1.425584] Initializing USB Mass Storage driver...
  383. [ 1.425930] usbcore: registered new interface driver usb-storage
  384. [ 1.426281] USB Mass Storage support registered.
  385. [ 1.426579] usbcore: registered new interface driver ums-alauda
  386. [ 1.427039] usbcore: registered new interface driver ums-cypress
  387. [ 1.427349] usbcore: registered new interface driver ums-datafab
  388. [ 1.427805] usbcore: registered new interface driver ums_eneub6250
  389. [ 1.428112] usbcore: registered new interface driver ums-freecom
  390. [ 1.428572] usbcore: registered new interface driver ums-isd200
  391. [ 1.428892] usbcore: registered new interface driver ums-jumpshot
  392. [ 1.429436] usbcore: registered new interface driver ums-karma
  393. [ 1.429743] usbcore: registered new interface driver ums-onetouch
  394. [ 1.430198] usbcore: registered new interface driver ums-sddr09
  395. [ 1.430507] usbcore: registered new interface driver ums-sddr55
  396. [ 1.430966] usbcore: registered new interface driver ums-usbat
  397. [ 1.431293] usbcore: registered new interface driver trancevibrator
  398. [ 1.433069] mbim_init: initialize 1 instances
  399. [ 1.433457] mbim_init: Initialized 1 ports
  400. [ 1.438224] rndis_qc_init: initialize rndis QC instance
  401. [ 1.439428] gadget: Mass Storage Function, version: 2009/09/11
  402. [ 1.439787] gadget: Number of LUNs=1
  403. [ 1.439987] lun0: LUN: removable file: (no medium)
  404. [ 1.440894] gadget: android_usb ready
  405. [ 1.442986] usbcore: registered new interface driver xpad
  406. [ 1.444134] [Touch] touch on
  407. [ 1.445475] input: touch_dev as /devices/virtual/input/input1
  408. [ 1.451212] [Touch] TYPE = 1 product id[PLG218] : syna product id[]
  409. [ 1.451351] [Touch] IC identifier[PLG218 - 1] fw_version[E061]
  410. [ 1.451430] [Touch] image_version[E061] : force[0]
  411. [ 1.452528] [Touch] FW-upgrade is not executed
  412. [ 1.453730] using rtc device, qpnp_rtc, for alarms
  413. [ 1.453826] qcom,qpnp-rtc qpnp-rtc-ee264000: rtc core: registered qpnp_rtc as rtc0
  414. [ 1.454220] i2c /dev entries driver
  415. [ 1.457341] ocmem: Notifier registered for 1
  416. [ 1.468948] msm_cci_probe: pdev ee27c200 device id = -1
  417. [ 1.487034] imx179_init_module:158
  418. [ 1.796398] __msm_jpeg_init:910] Jpeg Device id 0
  419. [ 1.796738] __msm_jpeg_init:910] Jpeg Device id 1
  420. [ 1.797062] __msm_jpeg_init:910] Jpeg Device id 2
  421. [ 1.804801] lirc_dev: IR Remote Control driver registered, major 240
  422. [ 1.805182] IR NEC protocol handler initialized
  423. [ 1.805530] IR RC5(x) protocol handler initialized
  424. [ 1.805727] IR RC6 protocol handler initialized
  425. [ 1.805921] IR JVC protocol handler initialized
  426. [ 1.806268] IR Sony protocol handler initialized
  427. [ 1.806459] IR RC5 (streamzap) protocol handler initialized
  428. [ 1.806807] IR SANYO protocol handler initialized
  429. [ 1.807000] IR MCE Keyboard/mouse protocol handler initialized
  430. [ 1.807348] IR LIRC bridge handler initialized
  431. [ 1.807747] usbcore: registered new interface driver uvcvideo
  432. [ 1.808099] USB Video Class driver (1.1.1)
  433. [ 1.808719] qpnp_charger_read_dt_props: tm not ready -517
  434. [ 1.808954] spmi qpnp-charger-ee260a00: Driver qcom,qpnp-charger requests probe deferral
  435. [ 1.809627] max17048_probe: start
  436. [ 1.809829] ac supply not found deferring probe
  437. [ 1.810202] i2c 84-0036: Driver max17048 requests probe deferral
  438. [ 1.811349] bq51013b_probe: start
  439. [ 1.811922] bq51013b_parse_dt: current_ma = 704
  440. [ 1.821158] bq24192_get_soc_from_batt_psy: battery power supply is not registered yet
  441. [ 1.822640] bq24192_get_prop_input_voltage: Unable to read vbus rc=-517
  442. [ 1.823230] bq24192_get_soc_from_batt_psy: battery power supply is not registered yet
  443. [ 1.825527] bq24192_get_prop_input_voltage: Unable to read vbus rc=-517
  444. [ 1.879930] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
  445. [ 1.880028] Bluetooth: BlueSleep Mode Driver Ver 1.1
  446. [ 1.880651] Bluetooth: bt_host_wake 42, bt_ext_wake 62
  447. [ 1.880743] Bluetooth: host_wake_irq 312, polarity 0
  448. [ 1.883288] cpuidle: using governor ladder
  449. [ 1.883568] cpuidle: using governor menu
  450. [ 1.883623] sdhci: Secure Digital Host Controller Interface driver
  451. [ 1.883694] sdhci: Copyright(c) Pierre Ossman
  452. [ 1.884085] mmc0: SDCC Version: 0x00000038
  453. [ 1.886367] mmc0: bam physical base=0xf9884000
  454. [ 1.886408] mmc0: bam virtual base=0xf0378000
  455. [ 1.886450] sps:BAM 0xf9884000 is registered.
  456. [ 1.886520] mmc0: BAM device registered. bam_handle=0xed752600
  457. [ 1.886806] sps:BAM 0xf9884000 (va:0xf0378000) enabled: ver:0x6, number of pipes:6
  458. [ 1.887154] mmc0: Qualcomm MSM SDCC-BAM at [mem 0xf9884000-0xf988afff flags 0x200] [irq 252 flags 0x400]
  459. [ 1.887243] mmc0: Qualcomm MSM SDCC-DML [mem 0xf98a4800-0xf98a48ff flags 0x200]
  460. [ 1.887340] mmc0: id 2, nonremovable 0
  461. [ 1.887381] wcf_status: wifi_detect = 0
  462. [ 1.887420] wcf_status_register
  463. [ 1.890124] mmc0: Qualcomm MSM SDCC-core [mem 0xf98a4000-0xf98a47ff flags 0x200] [irq 157 flags 0x400],0 dma -1 dmacrcri -1
  464. [ 1.890202] mmc0: Controller capabilities: 0x00003ffe
  465. [ 1.890277] mmc0: 8 bit data mode disabled
  466. [ 1.890347] mmc0: 4 bit data mode enabled
  467. [ 1.890420] mmc0: polling status mode disabled
  468. [ 1.890460] mmc0: MMC clock 400000 -> 200000000 Hz, PCLK 0 Hz
  469. [ 1.890531] mmc0: Slot eject status = 1
  470. [ 1.890571] mmc0: Power save feature enable = 1
  471. [ 1.890611] mmc0: SPS-BAM data transfer mode available
  472. [ 1.891239] sdhci-pltfm: SDHCI platform and OF driver helper
  473. [ 1.895237] mmc1: no vmmc regulator found
  474. [ 1.897450] mmc1: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
  475. [ 1.899088] qcom,leds-qpnp leds-qpnp-ee268200: Regulator get failed(-517)
  476. [ 1.899160] qcom,leds-qpnp leds-qpnp-ee268200: Unable to read flash config data
  477. [ 1.899207] spmi leds-qpnp-ee268200: Driver qcom,leds-qpnp requests probe deferral
  478. [ 1.900894] usbcore: registered new interface driver usbhid
  479. [ 1.900965] usbhid: USB HID core driver
  480. [ 1.901217] ashmem: initialized
  481. [ 1.901291] logger: created 256K log 'log_main'
  482. [ 1.901391] logger: created 256K log 'log_events'
  483. [ 1.901463] logger: created 256K log 'log_radio'
  484. [ 1.901574] logger: created 256K log 'log_system'
  485. [ 1.902136] sps:BAM 0xf9304000 is registered.
  486. [ 1.902187] sps:BAM 0xf9a44000 is registered.
  487. [ 1.902294] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
  488. [ 1.902710] qpnp_coincell_charger_show_state: enabled=Y, voltage=3000 mV, resistance=2100 ohm
  489. [ 1.902885] PMIC@SID4: PM8841 v2.1 options: 0, 0, 2, 2
  490. [ 1.903026] PMIC@SID0: PM8941 v3.1 options: 0, 0, 0, 0
  491. [ 1.903249] usbcore: registered new interface driver snd-usb-audio
  492. [ 1.910619] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
  493. [ 1.911127] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  494. [ 1.911796] platform qcom,msm-voip-dsp.39: Driver msm-voip-dsp requests probe deferral
  495. [ 1.912131] platform qcom,msm-pcm-voice.40: Driver msm-pcm-voice requests probe deferral
  496. [ 1.913833] ocmem: Notifier registered for 5
  497. [ 1.914297] msm8974-asoc-taiko sound.29: msm8974_asoc_machine_probe(): hdmi audio support present
  498. [ 1.914480] msm8974-asoc-taiko sound.29: msm8974_asoc_machine_probe() MBHC disabled = 1
  499. [ 1.915186] u32 classifier
  500. [ 1.915228] Actions configured
  501. [ 1.915273] Netfilter messages via NETLINK v0.30.
  502. [ 1.915350] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  503. [ 1.915581] ctnetlink v0.93: registering with nfnetlink.
  504. [ 1.915676] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  505. [ 1.915750] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  506. [ 1.915887] xt_time: kernel timezone is -0000
  507. [ 1.916089] ip_tables: (C) 2000-2006 Netfilter Core Team
  508. [ 1.916282] arp_tables: (C) 2002 David S. Miller
  509. [ 1.916350] TCP: bic registered
  510. [ 1.916426] TCP: cubic registered
  511. [ 1.916468] TCP: westwood registered
  512. [ 1.916510] TCP: highspeed registered
  513. [ 1.916592] TCP: hybla registered
  514. [ 1.916642] TCP: htcp registered
  515. [ 1.916692] TCP: vegas registered
  516. [ 1.916742] TCP: veno registered
  517. [ 1.916831] TCP: scalable registered
  518. [ 1.916881] TCP: lp registered
  519. [ 1.916931] TCP: yeah registered
  520. [ 1.917020] TCP: illinois registered
  521. [ 1.917069] Initializing XFRM netlink socket
  522. [ 1.917306] NET: Registered protocol family 10
  523. [ 1.918779] Mobile IPv6
  524. [ 1.918834] ip6_tables: (C) 2000-2006 Netfilter Core Team
  525. [ 1.918951] IPv6 over IPv4 tunneling driver
  526. [ 1.919333] NET: Registered protocol family 17
  527. [ 1.919402] NET: Registered protocol family 15
  528. [ 1.919485] Bridge firewalling registered
  529. [ 1.919580] Ebtables v2.0 registered
  530. [ 1.919722] Bluetooth: RFCOMM TTY layer initialized
  531. [ 1.919817] Bluetooth: RFCOMM socket layer initialized
  532. [ 1.919867] Bluetooth: RFCOMM ver 1.11
  533. [ 1.919917] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  534. [ 1.920006] Bluetooth: BNEP filters: protocol multicast
  535. [ 1.920057] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  536. [ 1.920177] L2TP core driver, V2.0
  537. [ 1.920225] PPPoL2TP kernel driver, V2.0
  538. [ 1.921095] mako_hotplug: init
  539. [ 1.921174] Registering SWP/SWPB emulation handler
  540. [ 1.921215] clock_late_init: Removing enables held for handed-off clocks
  541. [ 1.928333] gdsc_oxili_gx: disabling
  542. [ 1.928383] gdsc_venus: disabling
  543. [ 1.929036] qcom,leds-qpnp leds-qpnp-ee268200: Regulator get failed(-517)
  544. [ 1.929111] qcom,leds-qpnp leds-qpnp-ee268200: Unable to read flash config data
  545. [ 1.929190] spmi leds-qpnp-ee268200: Driver qcom,leds-qpnp requests probe deferral
  546. [ 1.929261] max17048_probe: start
  547. [ 1.929348] max17048_parse_dt: rcomp = 77 rcomp_co_hot = 700 rcomp_co_cold = 5225
  548. [ 1.929421] max17048_parse_dt: alert_thres = 2 full_soc = 970 empty_soc = 10
  549. [ 1.930055] max17048 84-0036: MAX17048 Fuel-Gauge Ver 0x12
  550. [ 1.930191] bq24192_get_soc_from_batt_psy: battery power supply is not registered yet
  551. [ 1.959751] max17048_probe: done
  552. [ 1.959934] 8941_smbb_boost: 5000 mV
  553. [ 1.960168] qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 0, dc = 0 b_health = 0 batt_present = 0
  554. [ 1.961417] boost_gpio_probe
  555. [ 1.961720] soundcontrol_init misc_register(soundcontrol)
  556. [ 1.964474] wifi_set_power = 1
  557. [ 1.988976] max17048_work: rsoc=0xA820 rvcell=0x0CB7 soc=86 v_mv=4068 i_ua=607053 t=312
  558. [ 2.022821] mmc1: BKOPS_EN bit = 0
  559. [ 2.036676] mmc1: new HS200 MMC card at address 0001
  560. [ 2.037006] mmcblk0: mmc1:0001 SEM16G 14.6 GiB
  561. [ 2.037186] mmcblk0rpmb: mmc1:0001 SEM16G partition 3 4.00 MiB
  562. [ 2.039242] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
  563. [ 2.114591] bcm_wifi_set_power: wifi power successed to pull up
  564. [ 2.319338] wifi_set_carddetect = 1
  565. [ 2.319410] wcf_status: wifi_detect = 1
  566. [ 2.319449] mmc0: Slot status change detected (0 -> 1)
  567. [ 2.371946] mmc0: queuing unknown CIS tuple 0x91 (3 bytes)
  568. [ 2.372047] mmc0: new ultra high speed SDR104 SDIO card at address 0001
  569. [ 2.377887] F1 signature OK, socitype:0x1 chip:0x4339 rev:0x1 pkg:0x2
  570. [ 2.378755] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
  571. [ 2.379151] CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xed1c13a0
  572. [ 2.379237] wl_create_event_handler(): thread:wl_event_handler:a0 started
  573. [ 2.379701] p2p0: P2P Interface Registered
  574. [ 2.379801] dhd_attach(): thread:dhd_watchdog_thread:a1 started
  575. [ 2.379938] dhd_attach(): thread:dhd_dpc:a2 started
  576. [ 2.380046] dhd_attach(): thread:dhd_rxf:a3 started
  577. [ 2.380167] dhd_attach(): thread:dhd_sysioc:a4 started
  578. [ 2.380494] wifi_get_mac_addr
  579. [ 2.380551] bcm_wifi_get_mac_addr: Failed to get information from file /persist/wifi/.macaddr (-2)
  580. [ 2.380625] [bcm_wifi_get_mac_addr] Exiting. MAC 00:90:4C:04:1A:92
  581. [ 2.380941] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:04:1a:92
  582. [ 2.381014]
  583. [ 2.381016] Dongle Host Driver, version 1.88.45 (r)
  584. [ 2.381018] Compiled in drivers/net/wireless/bcmdhd on May 30 2014 at 00:37:47
  585. [ 2.381194] wifi_set_power = 0
  586. [ 2.481271] bcm_wifi_set_power: wifi power successed to pull down
  587. [ 2.481312] =========== WLAN placed in RESET ========
  588. [ 2.482138] input: gpio-keys as /devices/gpio_keys.70/input/input2
  589. [ 2.482550] qcom,qpnp-rtc qpnp-rtc-ee264000: setting system clock to 1970-07-27 22:25:34 UTC (17965534)
  590. [ 2.493876] batt_tm_ctrl_probe: probe success
  591. [ 2.494563] msm8974_pwm_vibrator_probe: probed
  592. [ 2.499716] max1462x_hsd_probe: acc_read_value - 5295
  593. [ 2.499828] input: hs_detect as /devices/virtual/input/input3
  594. [ 2.500094] ALSA device list:
  595. [ 2.500135] No soundcards found.
  596. [ 2.500250] Warning: unable to open an initial console.
  597. [ 2.500362] Freeing init memory: 192K
  598. [ 2.524052] SELinux: Loaded policy from /sepolicy
  599. [ 2.539948] max17048_work: rsoc=0xA7E0 rvcell=0x0CBA soc=86 v_mv=4072 i_ua=618826 t=312
  600. [ 2.581443] mmc0: SDIO interrupt recieved without function driver claiming an irq
  601. [ 3.667020] msm-dwc3 msm_dwc3: DWC3 in low power mode
  602. [ 4.319893] init: could not import file '/init.carrier.rc' from '/init.rc'
  603. [ 4.320207] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  604. [ 4.320864] init: do_chown: Could not access /selinux/booleans
  605. [ 4.504168] keychord: using input dev qpnp_pon for fevent
  606. [ 4.504247] keychord: using input dev gpio-keys for fevent
  607. [ 4.504289] keychord: using input dev hs_detect for fevent
  608. [ 4.504509] init: cannot open '/initlogo.rle'
  609. [ 4.581172] EXT4-fs (mmcblk0p25): INFO: recovery required on readonly filesystem
  610. [ 4.581248] EXT4-fs (mmcblk0p25): write access will be enabled during recovery
  611. [ 4.590484] EXT4-fs (mmcblk0p25): recovery complete
  612. [ 4.592036] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: barrier=1
  613. [ 4.895990] EXT4-fs (mmcblk0p28): 1 orphan inode deleted
  614. [ 4.896034] EXT4-fs (mmcblk0p28): recovery complete
  615. [ 4.944664] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  616. [ 5.014300] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
  617. [ 5.042900] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
  618. [ 5.042994] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 30612/838832 files, 2536207/3351034 blocks
  619. [ 5.045769] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,noauto_da_alloc,errors=panic
  620. [ 5.076346] EXT4-fs (mmcblk0p27): recovery complete
  621. [ 5.077028] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  622. [ 5.138905] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/cache
  623. [ 5.145951] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
  624. [ 5.146007] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/cache: clean, 15/44832 files, 5821/179200 blocks
  625. [ 5.150218] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,noauto_da_alloc,errors=panic
  626. [ 5.159029] EXT4-fs (mmcblk0p16): recovery complete
  627. [ 5.159785] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nodelalloc,nomblk_io_submit,errors=panic
  628. [ 5.169807] adsp_boot_store:going to call adsp_loader_do
  629. [ 5.392692] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
  630. [ 5.392799] adsp_loader_do: Q6/ADSP image is loaded
  631. [ 5.447519] diag: In diag_send_msg_mask_update, invalid status 0
  632. [ 5.469749] Slimbus QMI NGD CB received event:2
  633. [ 5.472060] healthd: wakealarm_init: timerfd_create failed
  634. [ 5.472519] init: cannot find '/system/bin/auditd', disabling 'auditd'
  635. [ 5.476751] SLIM SAT: Received master capability
  636. [ 5.476831] sps:BAM 0xfe104000 (va:0xf0940000) enabled: ver:0x13, number of pipes:31
  637. [ 5.476967] sps:BAM 0xfe104000 is registered.
  638. [ 5.477320] init: cannot find '/system/bin/thermal-engine-hh', disabling 'thermal-engine'
  639. [ 5.477474] init: cannot find '/system/bin/handle_compcache', disabling 'compcache'
  640. [ 5.480322] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
  641. [ 5.480424] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
  642. [ 5.480554] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
  643. [ 5.481201] SLIM SAT: capability exchange successful
  644. [ 5.481349] taiko-slim taiko-slim-pgd: Platform data from device tree
  645. [ 5.481522] taiko-slim taiko-slim-pgd: cdc-vdd-buck: vol=[2150000 2150000]uV, curr=[650000]uA, ond 0
  646. [ 5.481626] taiko-slim taiko-slim-pgd: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
  647. [ 5.481725] taiko-slim taiko-slim-pgd: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
  648. [ 5.481764] warning: `daemonsu' uses 32-bit capabilities (legacy support in use)
  649. [ 5.481866] taiko-slim taiko-slim-pgd: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
  650. [ 5.481982] taiko-slim taiko-slim-pgd: cdc-vdd-a-1p2v: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0
  651. [ 5.482133] taiko-slim taiko-slim-pgd: cdc-vddcx-1: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0
  652. [ 5.482144] apr_tal:Q6 Is Up
  653. [ 5.482280] taiko-slim taiko-slim-pgd: cdc-vddcx-2: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0
  654. [ 5.486364] init: service 'console' requires console
  655. [ 5.486843] android_usb: already disabled
  656. [ 5.487133] func:mtp is enabled.
  657. [ 5.487247] mtp_bind_config
  658. [ 5.524560] init: untracked pid 227 exited
  659. [ 5.540046] slimbus:1 laddr:0xcb, EAPC:0x1:0xa0
  660. [ 5.540716] slimbus:1 laddr:0xca, EAPC:0x0:0xa0
  661. [ 5.543229] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
  662. [ 5.543647] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
  663. [ 5.543911] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
  664. [ 5.546539] taiko-slim taiko-slim-pgd: wcd9xxx_check_codec_type: detected taiko_codec, major 0x102, minor 0x1, ver 0x2
  665. [ 5.551112] taiko_codec taiko_codec: taiko_codec_probe()
  666. [ 5.551911] Update TAIKO register defaults.
  667. [ 5.613155] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  668. [ 5.613464] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  669. [ 5.613719] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
  670. [ 5.614004] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
  671. [ 5.614265] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
  672. [ 5.614547] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
  673. [ 5.614792] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
  674. [ 5.615384] asoc: msm-stub-rx <-> msm-dai-q6-dev.241 mapping ok
  675. [ 5.615624] asoc: msm-stub-tx <-> msm-dai-q6-dev.240 mapping ok
  676. [ 5.615825] compress asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
  677. [ 5.616088] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
  678. [ 5.616320] asoc: snd-soc-dummy-dai <-> SLIMBUS1_HOSTLESS mapping ok
  679. [ 5.616584] asoc: snd-soc-dummy-dai <-> SLIMBUS3_HOSTLESS mapping ok
  680. [ 5.616822] asoc: snd-soc-dummy-dai <-> SLIMBUS4_HOSTLESS mapping ok
  681. [ 5.617112] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
  682. [ 5.617390] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
  683. [ 5.617646] asoc: snd-soc-dummy-dai <-> LSM mapping ok
  684. [ 5.617907] asoc: snd-soc-dummy-dai <-> MultiMedia6 mapping ok
  685. [ 5.618186] asoc: snd-soc-dummy-dai <-> MultiMedia7 mapping ok
  686. [ 5.618429] asoc: snd-soc-dummy-dai <-> MultiMedia8 mapping ok
  687. [ 5.618673] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
  688. [ 5.618883] asoc: taiko_vifeedback <-> msm-dai-q6-dev.16393 mapping ok
  689. [ 5.619123] asoc: taiko_rx2 <-> msm-dai-q6-dev.16388 mapping ok
  690. [ 5.619397] asoc: taiko_tx2 <-> msm-dai-q6-dev.16389 mapping ok
  691. [ 5.619636] asoc: msm-stub-rx <-> msm-dai-q6-dev.12288 mapping ok
  692. [ 5.619855] asoc: msm-stub-tx <-> msm-dai-q6-dev.12289 mapping ok
  693. [ 5.620036] asoc: msm-stub-rx <-> msm-dai-q6-dev.12292 mapping ok
  694. [ 5.620251] asoc: msm-stub-tx <-> msm-dai-q6-dev.12293 mapping ok
  695. [ 5.620445] asoc: msm-stub-rx <-> msm-dai-q6-dev.224 mapping ok
  696. [ 5.620970] asoc: msm-stub-tx <-> msm-dai-q6-dev.225 mapping ok
  697. [ 5.621159] asoc: msm-stub-rx <-> msm-dai-q6-auxpcm.1 mapping ok
  698. [ 5.621378] asoc: msm-stub-tx <-> msm-dai-q6-auxpcm.1 mapping ok
  699. [ 5.621557] asoc: msm-stub-rx <-> msm-dai-q6-auxpcm.2 mapping ok
  700. [ 5.621769] asoc: msm-stub-tx <-> msm-dai-q6-auxpcm.2 mapping ok
  701. [ 5.621931] msm_audrx_init(), dev_namemsm-dai-q6-dev.16384
  702. [ 5.666312] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
  703. [ 5.667120] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
  704. [ 5.667222] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
  705. [ 5.672962] alarm_set_rtc: Failed to set RTC, time will be lost on reboot
  706. [ 5.682205] pil-q6v5-mss fc880000.qcom,mss: mba: Brought out of reset
  707. [ 5.698630] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
  708. [ 5.700632] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
  709. [ 5.701284] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
  710. [ 5.743019] init: untracked pid 239 exited
  711. [ 5.767378] QSEECOM: qseecom_load_app: App (keymaster) does'nt exist, loading apps for first time
  712. [ 5.771297] QSEECOM: qseecom_load_app: App with id 2 (keymaster) now loaded
  713. [ 5.780773] init: untracked pid 231 exited
  714. [ 5.810294] init: untracked pid 333 exited
  715. [ 5.847163] asoc: taiko_rx1 <-> msm-dai-q6-dev.16384 mapping ok
  716. [ 5.848707] asoc: taiko_tx1 <-> msm-dai-q6-dev.16385 mapping ok
  717. [ 5.849043] asoc: taiko_rx1 <-> msm-dai-q6-dev.16386 mapping ok
  718. [ 5.849612] asoc: taiko_tx1 <-> msm-dai-q6-dev.16387 mapping ok
  719. [ 5.850129] asoc: taiko_rx1 <-> msm-dai-q6-dev.16390 mapping ok
  720. [ 5.851103] asoc: taiko_tx1 <-> msm-dai-q6-dev.16391 mapping ok
  721. [ 5.851704] asoc: taiko_rx1 <-> msm-dai-q6-dev.16392 mapping ok
  722. [ 5.852249] asoc: msm-stub-tx <-> msm-dai-q6-dev.32772 mapping ok
  723. [ 5.859449] asoc: msm-stub-tx <-> msm-dai-q6-dev.32771 mapping ok
  724. [ 5.859862] asoc: taiko_mad1 <-> msm-dai-q6-dev.16395 mapping ok
  725. [ 5.860308] asoc: msm-stub-rx <-> msm-dai-q6-dev.32773 mapping ok
  726. [ 5.860725] asoc: msm_hdmi_audio_codec_rx_dai <-> msm-dai-q6-hdmi.8 mapping ok
  727. [ 5.875163] input: msm8974-taiko-mtp-snd-card Button Jack as /devices/sound.29/sound/card0/input4
  728. [ 5.875924] input: msm8974-taiko-mtp-snd-card Headset Jack as /devices/sound.29/sound/card0/input5
  729. [ 5.949403] MSM-CPP msm_cpp_poll:457 Poll failed: expect: 0x1
  730. [ 5.991443] MSM-CPP msm_cpp_poll:457 Poll failed: expect: 0x1
  731. [ 6.033436] MSM-CPP msm_cpp_poll:457 Poll failed: expect: 0xabcdefaa
  732. [ 6.033529] MSM-CPP cpp_load_fw:831 MC Bootloader Version: 0x3e646d63
  733. [ 6.047475] MSM-CPP cpp_load_fw:843 CPP FW Version: 0x10020003
  734. [ 6.215719] msm_sensor_config:1750 sensor state 1
  735. [ 6.226978] msm_init_ois:319 msm_init_ois : OIS chipid=1
  736. [ 6.628185] pil-q6v5-mss fc880000.qcom,mss: modem: Brought out of reset
  737. [ 6.702034] Notify: smsm init
  738. [ 6.742151] subsys-restart: subsys_err_ready_intr_handler(): Error ready interrupt occured for modem
  739. [ 6.763172] msm_ipc_router_send_control_msg: xprt_info not initialized
  740. [ 6.788517] mdss_dsi_cont_splash_on:688 DSI on for continuous splash.
  741. [ 6.795505] mdss_dsi_on:488 Panel already on.
  742. [ 6.795512] mako_hotplug: resume
  743. [ 6.943962] apr_tal:Modem Is Up
  744. [ 6.949553] diag: In diag_send_msg_mask_update, invalid status 0
  745. [ 7.393390] sps:BAM 0xfc834000 is registered.
  746. [ 7.396491] sps:BAM 0xfc834000 (va:0xf20f0000) enabled: ver:0x20, number of pipes:6
  747. [ 9.301452] MSM-CPP msm_cpp_poll:457 Poll failed: expect: 0x1
  748. [ 9.343460] MSM-CPP msm_cpp_poll:457 Poll failed: expect: 0x1
  749. [ 9.385492] MSM-CPP msm_cpp_poll:457 Poll failed: expect: 0xabcdefaa
  750. [ 9.385629] MSM-CPP cpp_load_fw:831 MC Bootloader Version: 0x3e646d63
  751. [ 9.399628] MSM-CPP cpp_load_fw:843 CPP FW Version: 0x10020003
  752. [ 9.425088] msm_sensor_config:1778 sensor state 0
  753. [ 9.529666] msm_sensor_config:1750 sensor state 1
  754. [ 9.549561] msm_sensor_config_mt9m114b:1336 [CMD_POLLING] success (cnt=1)
  755. [ 9.579593] msm_sensor_config_mt9m114b:1336 [CMD_POLLING] success (cnt=1)
  756. [ 9.659577] msm_sensor_config_mt9m114b:1336 [CMD_POLLING] success (cnt=4)
  757. [ 11.133138] MSM-CPP msm_cpp_poll:457 Poll failed: expect: 0x1
  758. [ 11.175155] MSM-CPP msm_cpp_poll:457 Poll failed: expect: 0x1
  759. [ 11.219183] MSM-CPP msm_cpp_poll:457 Poll failed: expect: 0xabcdefaa
  760. [ 11.219271] MSM-CPP cpp_load_fw:831 MC Bootloader Version: 0x3e646d63
  761. [ 11.233486] MSM-CPP cpp_load_fw:843 CPP FW Version: 0x10020003
  762. [ 11.334169] msm_sensor_config:1778 sensor state 0
  763. [ 11.523141] hdmi_tx_get_audio_edid_blk: failed. HDMI is not connected/ready for audio
  764. [ 11.541527] hdmi_tx_get_audio_edid_blk: failed. HDMI is not connected/ready for audio
  765. [ 11.648178] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=20 handle=eba800c0
  766. [ 21.568455] lowmem_shrink: convert oom_adj to oom_score_adj:
  767. [ 21.568566] oom_adj 0 => oom_score_adj 0
  768. [ 21.568671] oom_adj 1 => oom_score_adj 58
  769. [ 21.568745] oom_adj 2 => oom_score_adj 117
  770. [ 21.568832] oom_adj 3 => oom_score_adj 176
  771. [ 21.568938] oom_adj 9 => oom_score_adj 529
  772. [ 21.569025] oom_adj 15 => oom_score_adj 1000
  773. [ 21.759550] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
  774. [ 21.832421] EXT4-fs (dm-0): re-mounted. Opts: (null)
  775. [ 21.842331] EXT4-fs (dm-0): re-mounted. Opts: (null)
  776. [ 21.941753] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
  777. [ 22.112725] EXT4-fs (dm-1): re-mounted. Opts: (null)
  778. [ 22.125550] EXT4-fs (dm-1): re-mounted. Opts: (null)
  779. [ 22.209058] EXT4-fs (dm-2): mounted filesystem without journal. Opts: (null)
  780. [ 22.223618] EXT4-fs (dm-2): re-mounted. Opts: (null)
  781. [ 22.226158] EXT4-fs (dm-2): re-mounted. Opts: (null)
  782. [ 22.296176] EXT4-fs (dm-3): mounted filesystem without journal. Opts: (null)
  783. [ 22.406699] EXT4-fs (dm-3): re-mounted. Opts: (null)
  784. [ 22.408606] EXT4-fs (dm-3): re-mounted. Opts: (null)
  785. [ 22.466358] EXT4-fs (dm-4): mounted filesystem without journal. Opts: (null)
  786. [ 22.518122] EXT4-fs (dm-4): re-mounted. Opts: (null)
  787. [ 22.521238] EXT4-fs (dm-4): re-mounted. Opts: (null)
  788. [ 22.585091] EXT4-fs (dm-5): mounted filesystem without journal. Opts: (null)
  789. [ 22.638257] EXT4-fs (dm-5): re-mounted. Opts: (null)
  790. [ 22.640061] EXT4-fs (dm-5): re-mounted. Opts: (null)
  791. [ 22.697352]
  792. [ 22.697355] Dongle Host Driver, version 1.88.45 (r)
  793. [ 22.697358] Compiled in drivers/net/wireless/bcmdhd on May 30 2014 at 00:37:47
  794. [ 22.697539] wl_android_wifi_on in
  795. [ 22.697582] wifi_set_power = 1
  796. [ 22.728761] EXT4-fs (dm-6): mounted filesystem without journal. Opts: (null)
  797. [ 22.768372] EXT4-fs (dm-6): re-mounted. Opts: (null)
  798. [ 22.784171] EXT4-fs (dm-6): re-mounted. Opts: (null)
  799. [ 22.847689] bcm_wifi_set_power: wifi power successed to pull up
  800. [ 22.864319] EXT4-fs (dm-7): mounted filesystem without journal. Opts: (null)
  801. [ 23.003506] EXT4-fs (dm-7): re-mounted. Opts: (null)
  802. [ 23.008223] EXT4-fs (dm-7): re-mounted. Opts: (null)
  803. [ 23.049376] =========== WLAN going back to live ========
  804. [ 23.071857] EXT4-fs (dm-8): mounted filesystem without journal. Opts: (null)
  805. [ 23.171724] EXT4-fs (dm-8): re-mounted. Opts: (null)
  806. [ 23.173438] EXT4-fs (dm-8): re-mounted. Opts: (null)
  807. [ 23.197489] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  808. [ 23.262118] EXT4-fs (dm-9): mounted filesystem without journal. Opts: (null)
  809. [ 23.367272] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
  810. [ 23.369731] wifi_get_mac_addr
  811. [ 23.372948] bcm_wifi_get_mac_addr: READ MAC ADDRESS 8C:3A:E3:3F:AF:D0
  812. [ 23.383668] Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver mac=8c:3a:e3:3f:af:d0
  813. [ 23.404138] Firmware version = wl0: Nov 17 2013 18:22:33 version 6.37.32.RC23.34.8 (r437180)
  814. [ 23.405941] CFG80211-ERROR) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=8e:3a:e3:3f:af:d0
  815. [ 23.429842] EXT4-fs (dm-9): re-mounted. Opts: (null)
  816. [ 23.431900] EXT4-fs (dm-9): re-mounted. Opts: (null)
  817. [ 23.449163] dhd_rx_frame: net device is NOT registered yet. drop packet
  818. [ 23.449349] dhd_rx_frame: net device is NOT registered yet. drop packet
  819. [ 23.449574] dhd_rx_frame: net device is NOT registered yet. drop packet
  820. [ 23.525596] EXT4-fs (dm-10): mounted filesystem without journal. Opts: (null)
  821. [ 23.585150] EXT4-fs (dm-10): re-mounted. Opts: (null)
  822. [ 23.587849] EXT4-fs (dm-10): re-mounted. Opts: (null)
  823. [ 23.684569] EXT4-fs (dm-11): mounted filesystem without journal. Opts: (null)
  824. [ 23.747802] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for BR as BR rev 4
  825. [ 23.762706] EXT4-fs (dm-11): re-mounted. Opts: (null)
  826. [ 23.764967] EXT4-fs (dm-11): re-mounted. Opts: (null)
  827. [ 23.832720] EXT4-fs (dm-12): mounted filesystem without journal. Opts: (null)
  828. [ 23.996308] EXT4-fs (dm-12): re-mounted. Opts: (null)
  829. [ 23.999291] EXT4-fs (dm-12): re-mounted. Opts: (null)
  830. [ 24.100393] EXT4-fs (dm-13): mounted filesystem without journal. Opts: (null)
  831. [ 24.110831] EXT4-fs (dm-13): re-mounted. Opts: (null)
  832. [ 24.115080] EXT4-fs (dm-13): re-mounted. Opts: (null)
  833. [ 24.216510] EXT4-fs (dm-14): mounted filesystem without journal. Opts: (null)
  834. [ 24.331797] EXT4-fs (dm-14): re-mounted. Opts: (null)
  835. [ 24.333323] EXT4-fs (dm-14): re-mounted. Opts: (null)
  836. [ 24.419139] EXT4-fs (dm-15): mounted filesystem without journal. Opts: (null)
  837. [ 24.460635] EXT4-fs (dm-15): re-mounted. Opts: (null)
  838. [ 24.466141] EXT4-fs (dm-15): re-mounted. Opts: (null)
  839. [ 24.572199] EXT4-fs (dm-16): mounted filesystem without journal. Opts: (null)
  840. [ 24.656426] EXT4-fs (dm-16): re-mounted. Opts: (null)
  841. [ 24.667971] EXT4-fs (dm-16): re-mounted. Opts: (null)
  842. [ 24.751420] EXT4-fs (dm-17): mounted filesystem without journal. Opts: (null)
  843. [ 24.850267] EXT4-fs (dm-17): re-mounted. Opts: (null)
  844. [ 24.851353] EXT4-fs (dm-17): re-mounted. Opts: (null)
  845. [ 24.911082] EXT4-fs (dm-18): mounted filesystem without journal. Opts: (null)
  846. [ 24.919002] EXT4-fs (dm-18): re-mounted. Opts: (null)
  847. [ 24.921282] EXT4-fs (dm-18): re-mounted. Opts: (null)
  848. [ 24.988253] EXT4-fs (dm-19): mounted filesystem without journal. Opts: (null)
  849. [ 25.309792] EXT4-fs (dm-19): re-mounted. Opts: (null)
  850. [ 25.312824] EXT4-fs (dm-19): re-mounted. Opts: (null)
  851. [ 25.695522] acc_open
  852. [ 25.695575] acc_release
  853. [ 28.002309] bcm2079x 0-0077: 10,62
  854. [ 28.383868] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
  855. [ 28.391657] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
  856. [ 29.464878] init: untracked pid 1523 exited
  857. [ 39.371655] NOHZ: local_softirq_pending 08
  858. [ 40.343735] NOHZ: local_softirq_pending 08
  859. [ 43.423561] NOHZ: local_softirq_pending 08
  860. [ 43.424109] NOHZ: local_softirq_pending 08
  861. [ 43.424232] NOHZ: local_softirq_pending 08
  862. [ 43.479871] NOHZ: local_softirq_pending 08
  863. [ 43.493957] NOHZ: local_softirq_pending 08
  864. [ 43.597628] NOHZ: local_softirq_pending 08
  865. [ 43.645617] NOHZ: local_softirq_pending 08
  866. [ 47.881530] NOHZ: local_softirq_pending 08
  867. [ 50.142408] max17048_work: rsoc=0xA6E2 rvcell=0x0C6B soc=85 v_mv=3973 i_ua=1276719 t=320
  868. [ 60.371998] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
  869. [ 60.379209] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
  870. [ 60.383205] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
  871. [ 60.466325] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
  872. [ 60.474595] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
  873. [ 60.479144] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
  874. [ 61.480728] init: untracked pid 1453 exited
  875. [ 66.772693] alarm_set_rtc: Failed to set RTC, time will be lost on reboot
  876. [ 74.369799] New speaker_boost: 5
  877. [ 74.369900] Sound Control: Speaker default value 0
  878. [ 74.371374] Sound Control: Boosted Speaker RX3 value 5
  879. [ 74.371704] Sound Control: Boosted Speaker RX7 value 5
  880. [ 89.019665] init: untracked pid 1524 exited
  881. [ 92.608001] max17048_work: rsoc=0xA5E4 rvcell=0x0C79 soc=85 v_mv=3991 i_ua=771840 t=330
  882. [ 95.260237] init: untracked pid 3693 exited
  883. [ 151.652761] max17048_work: rsoc=0xA4E6 rvcell=0x0CB0 soc=84 v_mv=4060 i_ua=429503 t=331
  884. [ 243.860150] max17048_work: rsoc=0xA3E8 rvcell=0x0CA1 soc=84 v_mv=4041 i_ua=358954 t=324
  885. [ 273.551427] lm3630_backlight_off
  886. [ 273.802797] mdss_dsi_panel_off:
  887. [ 273.825286] [Touch] touch off
  888. [ 274.128233] net_ratelimit: 1 callbacks suppressed
  889. [ 274.128281] dhd_set_suspend: force extra Suspend setting
  890. [ 277.825213] PM: suspend entry 2014-06-01 19:43:38.267554193 UTC
  891. [ 277.825429] PM: Syncing filesystems ... done.
  892. [ 400.747528] wl_bss_connect_done succeeded with 98:fc:11:9f:b2:43
  893. [ 400.781496] wl_notify_connect_status nothing
  894. [ 400.782465] wl_bss_connect_done succeeded with 98:fc:11:9f:b2:43
  895. [ 401.105523] dhd_pno_stop_for_ssid : LEGACY PNO MODE is not enabled
  896. [ 401.226801] dhd_set_suspend: Remove extra suspend setting
  897. [ 401.239883] dhd_pno_get_for_batch: Batching SCAN mode is not enabled
  898. [ 401.240456] dhd_pno_stop_for_batch : PNO BATCH MODE is not enabled
  899. [ 401.240499] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL
  900. [ 401.240571] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL
  901. [ 401.851710] dhd_set_suspend: force extra Suspend setting
  902. [ 401.866857] dhd_get_suspend_bcn_li_dtim beacon=100 bcn_li_dtim=3 DTIM=1 Listen=10
  903. [ 401.949537] dhd_ndo_add_ip: ndo ipaddr entry added
  904. [ 420.673458] max17048_work: rsoc=0xA2EA rvcell=0x0CCC soc=83 v_mv=4095 i_ua=80347 t=313
  905.  
  906. No errors detected
  907. Boot info:
  908. Last boot reason: reboot_by_key
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!