API tools faq
paste
Advertisement
Guest User

XBian Dmesg

a guest
Dec 2nd, 2015
244
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.70 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Initializing cgroup subsys cpuacct
  3. [ 0.000000] Linux version 4.1.13+ (jenkins@vps01) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #1 Tue Nov 24 08:52:34 CET 2015
  4. [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  6. [ 0.000000] Machine model: Raspberry Pi Model B Plus Rev 1.2
  7. [ 0.000000] cma: Reserved 16 MiB at 0x16000000
  8. [ 0.000000] Memory policy: Data cache writeback
  9. [ 0.000000] On node 0 totalpages: 94208
  10. [ 0.000000] free_area_init_node: node 0, pgdat c06f86cc, node_mem_map d5cb3000
  11. [ 0.000000] Normal zone: 828 pages used for memmap
  12. [ 0.000000] Normal zone: 0 pages reserved
  13. [ 0.000000] Normal zone: 94208 pages, LIFO batch:31
  14. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  15. [ 0.000000] pcpu-alloc: [0] 0
  16. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 93380
  17. [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708.boardrev=0x10 bcm2708.serial=0x542698c2 smsc95xx.macaddr=B8:27:EB:26:98:C2 bcm2708_fb.fbswap=1 bcm2708.disk_led_gpio=47 bcm2708.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 telnet zswap.enabled=1 zswap.compressor=lz4 console=tty1 root=/dev/mmcblk0p2 rootflags=subvol=root/@,autodefrag,compress=lz4 rootfstype=btrfs rootwait logo.nologo quiet noswap loglevel=0 partswap startevent=mountall selinux=0 splash nohdparm --startup-event mountall
  18. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  19. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  20. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  21. [ 0.000000] Memory: 349096K/376832K available (5210K kernel code, 229K rwdata, 1528K rodata, 140K init, 365K bss, 11352K reserved, 16384K cma-reserved)
  22. [ 0.000000] Virtual kernel memory layout:
  23. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  24. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  25. vmalloc : 0xd7800000 - 0xff000000 ( 632 MB)
  26. lowmem : 0xc0000000 - 0xd7000000 ( 368 MB)
  27. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  28. .text : 0xc0008000 - 0xc069cda4 (6740 kB)
  29. .init : 0xc069d000 - 0xc06c0000 ( 140 kB)
  30. .data : 0xc06c0000 - 0xc06f9650 ( 230 kB)
  31. .bss : 0xc06f9650 - 0xc0754d20 ( 366 kB)
  32. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [ 0.000000] NR_IRQS:522
  34. [ 0.000000] clocksource stc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
  35. [ 0.000012] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
  36. [ 0.000044] Switching to timer-based delay loop, resolution 1000ns
  37. [ 0.000272] Console: colour dummy device 80x30
  38. [ 0.000430] console [tty1] enabled
  39. [ 0.000449] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=2000)
  40. [ 0.000466] pid_max: default: 32768 minimum: 301
  41. [ 0.000594] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  42. [ 0.000611] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  43. [ 0.001366] Initializing cgroup subsys memory
  44. [ 0.001402] Initializing cgroup subsys devices
  45. [ 0.001424] Initializing cgroup subsys net_cls
  46. [ 0.001442] Initializing cgroup subsys perf_event
  47. [ 0.001479] CPU: Testing write buffer coherency: ok
  48. [ 0.001818] Setting up static identity map for 0x81c0 - 0x81f8
  49. [ 0.003214] devtmpfs: initialized
  50. [ 0.011682] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  51. [ 0.011950] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3822520892550000 ns
  52. [ 0.013970] xor: measuring software checksum speed
  53. [ 0.032349] arm4regs : 1168.000 MB/sec
  54. [ 0.052407] 8regs : 564.000 MB/sec
  55. [ 0.072474] 32regs : 564.000 MB/sec
  56. [ 0.072486] xor: using function: arm4regs (1168.000 MB/sec)
  57. [ 0.072680] pinctrl core: initialized pinctrl subsystem
  58. [ 0.073398] NET: Registered protocol family 16
  59. [ 0.078686] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  60. [ 0.080011] bcm2708.uart_clock = 3000000
  61. [ 0.083970] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  62. [ 0.083990] hw-breakpoint: maximum watchpoint size is 4 bytes.
  63. [ 0.084109] Serial: AMBA PL011 UART driver
  64. [ 0.084315] 20201000.uart: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev2
  65. [ 0.084872] bcm2835-mbox 2000b880.mailbox: mailbox enabled
  66. [ 0.147741] raid6: int32x1 gen() 58 MB/s
  67. [ 0.181603] raid6: int32x1 xor() 44 MB/s
  68. [ 0.216165] raid6: int32x2 gen() 95 MB/s
  69. [ 0.249951] raid6: int32x2 xor() 60 MB/s
  70. [ 0.283933] raid6: int32x4 gen() 109 MB/s
  71. [ 0.318158] raid6: int32x4 xor() 79 MB/s
  72. [ 0.352544] raid6: int32x8 gen() 121 MB/s
  73. [ 0.386551] raid6: int32x8 xor() 75 MB/s
  74. [ 0.386564] raid6: using algorithm int32x8 gen() 121 MB/s
  75. [ 0.386572] raid6: .... xor() 75 MB/s, rmw enabled
  76. [ 0.386580] raid6: using intx1 recovery algorithm
  77. [ 0.386958] bcm2708-dmaengine 20007000.dma: DMA legacy API manager at f2007000, dmachans=0xf35
  78. [ 0.386994] bcm2708-dmaengine 20007000.dma: Initialized 7 DMA channels (+ 1 legacy)
  79. [ 0.387568] bcm2708-dmaengine 20007000.dma: Load BCM2835 DMA engine driver
  80. [ 0.387585] bcm2708-dmaengine 20007000.dma: dma_debug:0
  81. [ 0.388250] SCSI subsystem initialized
  82. [ 0.388566] usbcore: registered new interface driver usbfs
  83. [ 0.388667] usbcore: registered new interface driver hub
  84. [ 0.388785] usbcore: registered new device driver usb
  85. [ 0.389481] raspberrypi-firmware soc:firmware: Attached to firmware from 2015-11-01 14:49
  86. [ 0.416877] Switched to clocksource stc
  87. [ 0.428204] NET: Registered protocol family 2
  88. [ 0.429388] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  89. [ 0.429469] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  90. [ 0.429533] TCP: Hash tables configured (established 4096 bind 4096)
  91. [ 0.429615] UDP hash table entries: 256 (order: 0, 4096 bytes)
  92. [ 0.429642] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  93. [ 0.429909] NET: Registered protocol family 1
  94. [ 0.430309] RPC: Registered named UNIX socket transport module.
  95. [ 0.430326] RPC: Registered udp transport module.
  96. [ 0.430334] RPC: Registered tcp transport module.
  97. [ 0.430341] RPC: Registered tcp NFSv4.1 backchannel transport module.
  98. [ 0.431680] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
  99. [ 0.432636] futex hash table entries: 256 (order: -1, 3072 bytes)
  100. [ 0.442169] VFS: Disk quotas dquot_6.6.0
  101. [ 0.442408] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  102. [ 0.445066] NFS: Registering the id_resolver key type
  103. [ 0.445148] Key type id_resolver registered
  104. [ 0.445159] Key type id_legacy registered
  105. [ 0.445194] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  106. [ 0.449525] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  107. [ 0.449559] io scheduler noop registered
  108. [ 0.449577] io scheduler deadline registered
  109. [ 0.449639] io scheduler cfq registered (default)
  110. [ 0.451722] BCM2708FB: allocated DMA memory 56400000
  111. [ 0.451776] BCM2708FB: allocated DMA channel 0 @ f2007000
  112. [ 0.474914] Console: switching to colour frame buffer device 240x67
  113. [ 0.493447] vc-cma: Videocore CMA driver
  114. [ 0.493467] vc-cma: vc_cma_base = 0x00000000
  115. [ 0.493476] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  116. [ 0.493485] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  117. [ 0.493756] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
  118. [ 0.495343] vchiq: vchiq_init_state: slot_zero = 0xd6480000, is_master = 0
  119. [ 0.498544] usbcore: registered new interface driver smsc95xx
  120. [ 0.498649] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  121. [ 0.698982] Core Release: 2.80a
  122. [ 0.699021] Setting default values for core params
  123. [ 0.699061] Finished setting default values for core params
  124. [ 0.899220] Using Buffer DMA mode
  125. [ 0.899240] Periodic Transfer Interrupt Enhancement - disabled
  126. [ 0.899250] Multiprocessor Interrupt Enhancement - disabled
  127. [ 0.899259] OTG VER PARAM: 0, OTG VER FLAG: 0
  128. [ 0.899326] Dedicated Tx FIFOs mode
  129. [ 0.899737] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xd6414000 dma = 0x56414000 len=9024
  130. [ 0.899771] FIQ FSM acceleration enabled for :
  131. Non-periodic Split Transactions
  132. Periodic Split Transactions
  133. High-Speed Isochronous Endpoints
  134. [ 0.899794] dwc_otg: Microframe scheduler enabled
  135. [ 0.899855] WARN::hcd_init_fiq:412: FIQ on core 0 at 0xc03ba87c
  136. [ 0.899871] WARN::hcd_init_fiq:413: FIQ ASM at 0xc03bab04 length 36
  137. [ 0.899895] WARN::hcd_init_fiq:438: MPHI regs_base at 0xd7812000
  138. [ 0.899942] dwc_otg 20980000.usb: DWC OTG Controller
  139. [ 0.899994] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
  140. [ 0.900045] dwc_otg 20980000.usb: irq 32, io mem 0x00000000
  141. [ 0.900078] Init: Port Power? op_state=1
  142. [ 0.900087] Init: Power Port (0)
  143. [ 0.900320] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  144. [ 0.900339] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  145. [ 0.900354] usb usb1: Product: DWC OTG Controller
  146. [ 0.900366] usb usb1: Manufacturer: Linux 4.1.13+ dwc_otg_hcd
  147. [ 0.900377] usb usb1: SerialNumber: 20980000.usb
  148. [ 0.901267] hub 1-0:1.0: USB hub found
  149. [ 0.901337] hub 1-0:1.0: 1 port detected
  150. [ 0.901804] dwc_otg: FIQ enabled
  151. [ 0.901818] dwc_otg: NAK holdoff enabled
  152. [ 0.901826] dwc_otg: FIQ split-transaction FSM enabled
  153. [ 0.901885] Module dwc_common_port init
  154. [ 0.902289] usbcore: registered new interface driver usb-storage
  155. [ 0.902615] mousedev: PS/2 mouse device common for all mice
  156. [ 0.903609] bcm2835-cpufreq: min=700000 max=840000
  157. [ 0.903947] sdhci: Secure Digital Host Controller Interface driver
  158. [ 0.903960] sdhci: Copyright(c) Pierre Ossman
  159. [ 0.904296] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
  160. [ 0.904316] mmc-bcm2835 20300000.mmc: DMA channels allocated
  161. [ 0.927202] ledtrig-cpu: registered to indicate activity on CPUs
  162. [ 0.927347] hidraw: raw HID events driver (C) Jiri Kosina
  163. [ 0.927643] usbcore: registered new interface driver usbhid
  164. [ 0.927655] usbhid: USB HID core driver
  165. [ 0.928031] NET: Registered protocol family 17
  166. [ 0.928235] Key type dns_resolver registered
  167. [ 0.945801] Btrfs loaded
  168. [ 0.946006] vc-sm: Videocore shared memory driver
  169. [ 0.946101] [vc_sm_connected_init]: start
  170. [ 0.950005] [vc_sm_connected_init]: end - returning 0
  171. [ 0.951598] Waiting for root device /dev/mmcblk0p2...
  172. [ 0.969880] mmc0: host does not support reading read-only switch, assuming write-enable
  173. [ 0.971829] mmc0: new high speed SDHC card at address 0001
  174. [ 0.972332] mmcblk0: mmc0:0001 00000 14.6 GiB
  175. [ 0.973633] mmcblk0: p1 p2 p3
  176. [ 1.054148] BTRFS: device label xbian devid 1 transid 745 /dev/root
  177. [ 1.056444] BTRFS info (device mmcblk0p2): enabling auto defrag
  178. [ 1.056478] BTRFS info (device mmcblk0p2): disk space caching is enabled
  179. [ 1.056489] BTRFS: has skinny extents
  180. [ 1.095841] BTRFS: detected SSD devices, enabling SSD mode
  181. [ 1.101106] Indeed it is in host mode hprt0 = 00021501
  182. [ 1.165590] VFS: Mounted root (btrfs filesystem) readonly on device 0:14.
  183. [ 1.168094] devtmpfs: mounted
  184. [ 1.168619] Freeing unused kernel memory: 140K (c069d000 - c06c0000)
  185. [ 1.265010] usb 1-1: new high-speed USB device number 2 using dwc_otg
  186. [ 1.265176] Indeed it is in host mode hprt0 = 00001101
  187. [ 1.441226] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  188. [ 1.441264] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  189. [ 1.442146] hub 1-1:1.0: USB hub found
  190. [ 1.442278] hub 1-1:1.0: 5 ports detected
  191. [ 1.718999] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  192. [ 1.807330] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  193. [ 1.807357] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  194. [ 1.810314] smsc95xx v1.0.4
  195. [ 1.852370] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:26:98:c2
  196. [ 1.913509] random: init urandom read with 84 bits of entropy available
  197. [ 1.927306] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
  198. [ 2.018259] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=8178
  199. [ 2.018286] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  200. [ 2.018302] usb 1-1.2: Product: USB WLAN
  201. [ 2.018315] usb 1-1.2: Manufacturer: 802.11n
  202. [ 2.018325] usb 1-1.2: SerialNumber: 00e04c000001
  203. [ 2.209006] usb 1-1.4: new high-speed USB device number 5 using dwc_otg
  204. [ 2.298581] usb 1-1.4: New USB device found, idVendor=04e8, idProduct=6124
  205. [ 2.298611] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  206. [ 2.298624] usb 1-1.4: Product: D3 Station
  207. [ 2.298636] usb 1-1.4: Manufacturer: Samsung
  208. [ 2.298646] usb 1-1.4: SerialNumber: 00000000011E0A49
  209. [ 2.299701] usb-storage 1-1.4:1.0: USB Mass Storage device detected
  210. [ 2.317041] scsi host0: usb-storage 1-1.4:1.0
  211. [ 2.699010] BTRFS info (device mmcblk0p2): disk space caching is enabled
  212. [ 3.319248] scsi 0:0:0:0: Direct-Access Samsung D3 Station 0202 PQ: 0 ANSI: 6
  213. [ 3.323046] sd 0:0:0:0: [sda] Spinning up disk...
  214. [ 5.471005] random: nonblocking pool is initialized
  215. [ 8.816979] ...
  216. [ 10.927618] BTRFS info (device mmcblk0p2): disk space caching is enabled
  217. [ 11.017847] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  218. [ 11.850969] .ready
  219. [ 11.851791] sd 0:0:0:0: [sda] 732566645 4096-byte logical blocks: (2.93 TB/2.72 TiB)
  220. [ 11.852629] sd 0:0:0:0: [sda] Write Protect is off
  221. [ 11.852667] sd 0:0:0:0: [sda] Mode Sense: 2b 00 10 08
  222. [ 11.853482] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  223. [ 11.854768] sd 0:0:0:0: [sda] 732566645 4096-byte logical blocks: (2.93 TB/2.72 TiB)
  224. [ 12.274117] sda: sda1
  225. [ 12.276276] sd 0:0:0:0: [sda] 732566645 4096-byte logical blocks: (2.93 TB/2.72 TiB)
  226. [ 12.277976] sd 0:0:0:0: [sda] Attached SCSI disk
  227. [ 12.534454] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
  228. [ 15.149218] init: xbian-failaccess main process (98) killed by TERM signal
  229. [ 21.222346] init: failsafe main process (75) killed by TERM signal
  230. [ 34.036246] systemd-udevd[1138]: starting version 215
  231. [ 34.986767] bcm2708_rng_init=d7ffe000
  232. [ 36.364015] lirc_dev: IR Remote Control driver registered, major 243
  233. [ 36.399503] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
  234. [ 36.421372] lirc_rpi: module is from the staging directory, the quality is unknown, you have been warned.
  235. [ 36.973857] sd 0:0:0:0: Attached scsi generic sg0 type 0
  236. [ 37.321017] lirc_rpi: auto-detected active high receiver on GPIO pin 18
  237. [ 37.321395] lirc_rpi lirc_rpi: lirc_dev: driver lirc_rpi registered at minor = 0
  238. [ 37.321412] lirc_rpi: driver registered!
  239. [ 38.219273] usbcore: registered new interface driver rtl8192cu
  240. [ 43.417091] fuse init (API version 7.23)
  241. [ 45.964837] input: lircd as /devices/virtual/input/input0
  242. [ 84.988923] sched: RT throttling activated
  243. [ 133.012789] init: wait-for-state (xbmcxbmc-loaded) main process (1549) killed by TERM signal
  244. [ 161.938992] init: wait-for-state (zram-swapxbmc-done) main process (1369) terminated with status 100
  245. [ 184.679190] Adding 250876k swap on /dev/mmcblk0p3. Priority:0 extents:1 across:250876k SSFS
  246. [ 209.622257] init: xbmc post-start process (1530) terminated with status 1
  247. [ 210.634175] init: xbmc main process (1528) killed by TERM signal
  248. [ 215.885755] init: wait-for-state (kill-splashxbmc-exits) main process (2253) killed by TERM signal
  249. [ 216.081934] init: xbmc-exits main process (2403) killed by TERM signal
  250. [ 223.202543] init: failsafe-boot-started pre-start process (2263) terminated with status 1
  251. [ 328.454636] init: failsafe-boot-started pre-start process (3041) terminated with status 1
  252. [ 434.416673] init: failsafe-boot-started pre-start process (3743) terminated with status 1
  253. [ 540.414516] init: failsafe-boot-started pre-start process (4445) terminated with status 1
  254. [ 646.687694] init: failsafe-boot-started pre-start process (5163) terminated with status 1
  255. [ 711.826399] systemd-logind[5810]: New seat seat0.
  256. [ 711.911930] systemd-logind[5810]: Failed to start user service: Unknown unit: user@1000.service
  257. [ 711.974065] systemd-logind[5810]: New session c1 of user xbian.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!