API tools faq
paste
Advertisement
Guest User

dmesg

a guest
May 3rd, 2012
139
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 52.42 KB | None | 0 0
raw download clone embed print report
  1. <5>[ 0.000000] Linux version 3.0.8+ (inet_dada@InetSoftware) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #162 PREEMPT Fri Mar 30 10:17:42 CST 2012
  2. <7>[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
  3. <7>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  4. <7>[ 0.000000] Machine: sun4i
  5. <6>[ 0.000000] Total Detected Memory: 1024MB with 2 banks
  6. <6>[ 0.000000] Memory Reserved(in bytes):
  7. <6>[ 0.000000] LCD: 0x5a000000, 0x02000000
  8. <6>[ 0.000000] SYS: 0x43000000, 0x00010000
  9. <6>[ 0.000000] G2D: 0x58000000, 0x01000000
  10. <6>[ 0.000000] VE : 0x44000000, 0x05000000
  11. <6>[ 0.000000] VE : 0x49000000, 0x01000000
  12. <7>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
  13. <7>[ 0.000000] On node 0 totalpages: 245760
  14. <7>[ 0.000000] free_area_init_node: node 0, pgdat c07b7748, node_mem_map c1030000
  15. <7>[ 0.000000] Normal zone: 1280 pages used for memmap
  16. <7>[ 0.000000] Normal zone: 0 pages reserved
  17. <7>[ 0.000000] Normal zone: 146176 pages, LIFO batch:31
  18. <7>[ 0.000000] HighMem zone: 768 pages used for memmap
  19. <7>[ 0.000000] HighMem zone: 97536 pages, LIFO batch:31
  20. <7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  21. <7>[ 0.000000] pcpu-alloc: [0] 0
  22. <7>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
  23. <5>[ 0.000000] Kernel command line: console=ttyS0,115200 rw init=/init loglevel=8
  24. <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  25. <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  26. <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  27. <6>[ 0.000000] Memory: 448MB 512MB = 960MB total
  28. <5>[ 0.000000] Memory: 833472k/833472k available, 149568k reserved, 393216K highmem
  29. <5>[ 0.000000] Virtual kernel memory layout:
  30. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  31. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  32. <5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  33. <5>[ 0.000000] vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
  34. <5>[ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
  35. <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  36. <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  37. <5>[ 0.000000] .init : 0xc0008000 - 0xc002f000 ( 156 kB)
  38. <5>[ 0.000000] .text : 0xc002f000 - 0xc076d824 (7419 kB)
  39. <5>[ 0.000000] .data : 0xc076e000 - 0xc07c1810 ( 335 kB)
  40. <5>[ 0.000000] .bss : 0xc07c1834 - 0xc097ceb8 (1774 kB)
  41. <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  42. <6>[ 0.000000] NR_IRQS:96 nr_irqs:96 96
  43. <6>[ 0.000000] timer0: Periodic Mode
  44. <6>[ 0.000000] Console: colour dummy device 80x30
  45. <6>[ 0.000000] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  46. <6>[ 0.040000] pid_max: default: 32768 minimum: 301
  47. <6>[ 0.040000] Mount-cache hash table entries: 512
  48. <6>[ 0.040000] CPU: Testing write buffer coherency: ok
  49. <6>[ 0.040000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  50. <6>[ 0.040000] devtmpfs: initialized
  51. <6>[ 0.040000] print_constraints: dummy:
  52. <6>[ 0.040000] NET: Registered protocol family 16
  53. <6>[ 0.040000] hw-breakpoint: debug architecture 0x4 unsupported.
  54. <7>[ 0.040000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  55. <6>[ 0.040000] Initialize DMAC OK
  56. <6>[ 0.040000] bio: create slab <bio-0> at 0
  57. <5>[ 0.040000] SCSI subsystem initialized
  58. <6>[ 0.040000] usbcore: registered new interface driver usbfs
  59. <6>[ 0.040000] usbcore: registered new interface driver hub
  60. <6>[ 0.040000] usbcore: registered new device driver usb
  61. <6>[ 0.040000] Advanced Linux Sound Architecture Driver Version 1.0.24.
  62. <6>[ 0.040000] Bluetooth: Core ver 2.16
  63. <6>[ 0.040000] NET: Registered protocol family 31
  64. <6>[ 0.040000] Bluetooth: HCI device and connection manager initialized
  65. <6>[ 0.040000] Bluetooth: HCI socket layer initialized
  66. <6>[ 0.040000] Bluetooth: L2CAP socket layer initialized
  67. <6>[ 0.040000] Bluetooth: SCO socket layer initialized
  68. <6>[ 0.050000] cfg80211: Calling CRDA to update world regulatory domain
  69. <7>[ 0.050000] Init eGon pin module V2.0
  70. <6>[ 0.050000] Switching to clocksource aw 64bits couter
  71. <5>[ 0.050000] FS-Cache: Loaded
  72. <6>[ 0.050000] CacheFiles: Loaded
  73. <7>[ 0.050000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
  74. <7>[ 0.050000] [sw_hcd0]: usb host driver initialize........
  75. <7>[ 0.050000] [sw_hcd0]: open_usb_clock
  76. <7>[ 0.069412] [sw_hcd0]: host_init_state = 0
  77. <7>[ 0.069412] [sw_hcd0]: platform is usb host
  78. <7>[ 0.069412] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
  79. <6>[ 0.069412] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  80. <6>[ 0.069412] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  81. <6>[ 0.069412] hub 1-0:1.0: USB hub found
  82. <6>[ 0.069412] hub 1-0:1.0: 1 port detected
  83. <7>[ 0.069412] wrn: hcd is not enable, need not start hcd
  84. <7>[ 0.069412] [sw_hcd0]: sw_usb_host0_disable start
  85. <7>[ 0.069412] -------sw_hcd0_soft_disconnect---------
  86. <7>[ 0.069412] [sw_hcd_host0]: Set USB Power OFF
  87. <7>[ 0.069412] wrn: hcd is not enable, need not stop hcd
  88. <7>[ 0.069412] [sw_hcd0]: close_usb_clock
  89. <7>[ 0.069412] [sw_hcd0]: sw_usb_host0_disable end
  90. <7>[ 0.069412] [sw_udc]: udc_init: version 20080411
  91. <7>[ 0.069412] axp driver uning configuration failed(539)
  92. <7>[ 0.069412] axp driver uning configuration failed(551)
  93. <6>[ 0.069412] NET: Registered protocol family 2
  94. <6>[ 0.069412] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  95. <6>[ 0.069412] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  96. <6>[ 0.079424] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
  97. <6>[ 0.079424] TCP: Hash tables configured (established 131072 bind 65536)
  98. <6>[ 0.079424] TCP reno registered
  99. <6>[ 0.079424] UDP hash table entries: 512 (order: 1, 8192 bytes)
  100. <6>[ 0.079424] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
  101. <6>[ 0.079424] NET: Registered protocol family 1
  102. <6>[ 0.079424] RPC: Registered named UNIX socket transport module.
  103. <6>[ 0.079424] RPC: Registered udp transport module.
  104. <6>[ 0.079424] RPC: Registered tcp transport module.
  105. <6>[ 0.079424] RPC: Registered tcp NFSv4.1 backchannel transport module.
  106. <6>[ 0.079424] Trying to unpack rootfs image as initramfs...
  107. <6>[ 0.109421] Freeing initrd memory: 188K
  108. <7>[ 0.109421] [pm]aw_pm_init!
  109. <7>[ 0.130372] highmem bounce pool size: 64 pages
  110. <6>[ 0.130372] ashmem: initialized
  111. <5>[ 0.130372] VFS: Disk quotas dquot_6.5.2
  112. <7>[ 0.130372] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  113. <6>[ 0.139433] NTFS driver 2.1.30 [Flags: R/W].
  114. <6>[ 0.139433] fuse init (API version 7.16)
  115. <6>[ 0.139433] msgmni has been set to 860
  116. <4>[ 0.139433] cryptomgr_test used greatest stack depth: 6672 bytes left
  117. <4>[ 0.139433] cryptomgr_test used greatest stack depth: 6480 bytes left
  118. <4>[ 0.139433] cryptomgr_test used greatest stack depth: 6388 bytes left
  119. <4>[ 0.139433] cryptomgr_test used greatest stack depth: 6280 bytes left
  120. <6>[ 0.139433] alg: No test for stdrng (krng)
  121. <6>[ 0.139433] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  122. <6>[ 0.139433] io scheduler noop registered
  123. <6>[ 0.139433] io scheduler deadline registered
  124. <6>[ 0.139433] io scheduler cfq registered (default)
  125. <6>[ 0.139433] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  126. <7>[ 0.139433] [uart]: used uart info.: 0x01
  127. <6>[ 0.167660] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  128. <6>[ 0.827750] console [ttyS0] enabled
  129. <7>[ 0.831285] [uart]: serial probe 0, membase (null) irq 1 mapbase 0x01c28000
  130. <7>[ 0.831285] G2D: drv_g2d_init
  131. <6>[ 0.842088] G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
  132. <6>[ 0.842088] G2D: head:d8000000,tail:d9000000
  133. <6>[ 0.852133] G2D: Module initialized.major:251
  134. <6>[ 0.852133] brd: module loaded
  135. <6>[ 0.860160] loop: module loaded
  136. <7>[ 0.860160] [NAND]nand driver, init.
  137. <7>[ 0.860160] [NAND] nand gpio_request
  138. <7>[ 0.872562] [NAND] nand driver version: 0x2 0x9
  139. <7>[ 0.872562] nand interrupte register ok
  140. <7>[ 0.881068] ret of NFC_ChangMode is 0
  141. <7>[ 0.881068] dma_hdle is 0
  142. <7>[ 0.881068] dma_hdle is 10000008
  143. <7>[ 0.909473] The 0 disk name = bootloader, class name = DISK, disk size = 32768
  144. <7>[ 0.925706] The 1 disk name = env, class name = DISK, disk size = 4096
  145. <7>[ 0.932253] The 2 disk name = boot, class name = DISK, disk size = 65536
  146. <7>[ 0.932253] The 3 disk name = system, class name = DISK, disk size = 524288
  147. <7>[ 0.945963] The 4 disk name = data, class name = DISK, disk size = 2097152
  148. <7>[ 0.952843] The 5 disk name = misc, class name = DISK, disk size = 2048
  149. <7>[ 0.952843] The 6 disk name = recovery, class name = DISK, disk size = 65536
  150. <7>[ 0.966502] The 7 disk name = cache, class name = DISK, disk size = 524288
  151. <7>[ 0.973378] The 8 disk name = UDISK, class name = DISK, disk size = 12247040
  152. <7>[ 0.980428] The 8 disk size = 12247040
  153. <7>[ 0.980428] part total count = 9
  154. <6>[ 0.980428] nanda:
  155. <6>[ 0.990861] nandb: unknown partition table
  156. <6>[ 0.990861] nandc: unknown partition table
  157. <6>[ 1.002184] nandd: unknown partition table
  158. <6>[ 1.009485] nande: unknown partition table
  159. <6>[ 1.009485] nandf: unknown partition table
  160. <6>[ 1.019575] nandg: unknown partition table
  161. <6>[ 1.019575] nandh: unknown partition table
  162. <6>[ 1.031259] nandi:
  163. <6>[ 1.031259] benn: nand probe enter
  164. <7>[ 1.031259] [NAND]nand driver, ok.
  165. <6>[ 1.041621] PPP generic driver version 2.4.2
  166. <6>[ 1.041621] PPP Deflate Compression module registered
  167. <6>[ 1.051469] PPP BSD Compression module registered
  168. <6>[ 1.051469] PPP MPPE Compression module registered
  169. <6>[ 1.061955] NET: Registered protocol family 24
  170. <6>[ 1.061955] PPTP driver version 0.8.5
  171. <6>[ 1.070230] emac driver is disabled
  172. <6>[ 1.070230] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  173. <6>[ 1.080719] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  174. <7>[ 1.080719] WRN:L1076(drivers/usb/host/sw_hci_sun4i.c):ERR: usb1 sw-ehci1 is disable
  175. <7>[ 1.092162] WRN:L1084(drivers/usb/host/sw_hci_sun4i.c):ERR: usb1 sw-ohci1 is disable
  176. <7>[ 1.099940] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc0872aa8
  177. <7>[ 1.110504] [sw-ehci2]: open clock
  178. <7>[ 1.129488] [sw-ehci2]: Set USB Power ON
  179. <6>[ 1.129488] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  180. <6>[ 1.145261] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 2
  181. <6>[ 1.152331] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
  182. <6>[ 1.169491] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  183. <7>[ 1.169491] ehci_irq: port change detect
  184. <6>[ 1.169491] hub 2-0:1.0: USB hub found
  185. <6>[ 1.183106] hub 2-0:1.0: 1 port detected
  186. <7>[ 1.183106] [sw-ehci2]: sw_usb_disable_ehci
  187. <7>[ 1.191488] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc0872aa8
  188. <6>[ 1.191488] sw-ehci sw-ehci.2: remove, state 1
  189. <6>[ 1.203765] usb usb2: USB disconnect, device number 1
  190. <6>[ 1.209750] sw-ehci sw-ehci.2: USB bus 2 deregistered
  191. <7>[ 1.209750] [sw-ehci2]: Set USB Power OFF
  192. <7>[ 1.209750] [sw-ehci2]: close clock
  193. <7>[ 1.222353] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc0872bb8
  194. <7>[ 1.230245] [sw-ohci2]: open clock
  195. <7>[ 1.249497] [sw-ohci2]: Set USB Power ON
  196. <6>[ 1.249497] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  197. <6>[ 1.264640] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 2
  198. <6>[ 1.271703] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
  199. <6>[ 1.329502] hub 2-0:1.0: USB hub found
  200. <6>[ 1.329502] hub 2-0:1.0: 1 port detected
  201. <7>[ 1.341596] [sw-ohci2]: sw_usb_disable_ohci
  202. <7>[ 1.341596] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc0872bb8
  203. <6>[ 1.353852] sw-ohci sw-ohci.2: remove, state 1
  204. <6>[ 1.353852] usb usb2: USB disconnect, device number 1
  205. <6>[ 1.363357] sw-ohci sw-ohci.2: USB bus 2 deregistered
  206. <7>[ 1.363357] [sw-ohci2]: Set USB Power OFF
  207. <7>[ 1.372755] [sw-ohci2]: close clock
  208. <6>[ 1.372755] Initializing USB Mass Storage driver...
  209. <6>[ 1.381169] usbcore: registered new interface driver usb-storage
  210. <6>[ 1.381169] USB Mass Storage support registered.
  211. <6>[ 1.391902] usbcore: registered new interface driver ums-alauda
  212. <6>[ 1.391902] usbcore: registered new interface driver ums-cypress
  213. <6>[ 1.403914] usbcore: registered new interface driver ums-datafab
  214. <6>[ 1.409965] usbcore: registered new interface driver ums_eneub6250
  215. <6>[ 1.409965] usbcore: registered new interface driver ums-freecom
  216. <6>[ 1.422225] usbcore: registered new interface driver ums-isd200
  217. <6>[ 1.422225] usbcore: registered new interface driver ums-jumpshot
  218. <6>[ 1.434311] usbcore: registered new interface driver ums-karma
  219. <6>[ 1.440188] usbcore: registered new interface driver ums-onetouch
  220. <6>[ 1.440188] usbcore: registered new interface driver ums-realtek
  221. <6>[ 1.452378] usbcore: registered new interface driver ums-sddr09
  222. <6>[ 1.452378] usbcore: registered new interface driver ums-sddr55
  223. <6>[ 1.464295] usbcore: registered new interface driver ums-usbat
  224. <6>[ 1.470175] usbcore: registered new interface driver usbserial
  225. <6>[ 1.470175] usbserial: USB Serial Driver core
  226. <6>[ 1.480479] USB Serial support registered for FTDI USB Serial Device
  227. <6>[ 1.480479] usbcore: registered new interface driver ftdi_sio
  228. <6>[ 1.492719] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
  229. <6>[ 1.492719] USB Serial support registered for GSM modem (1-port)
  230. <6>[ 1.504593] usbcore: registered new interface driver option
  231. <6>[ 1.510272] option: v0.7.2:USB Driver for GSM modems
  232. <7>[ 1.510272] ------print_msc_config-----
  233. <7>[ 1.510272] vendor_id = 0x18d1
  234. <7>[ 1.523198] mass_storage_id = 0x1
  235. <7>[ 1.523198] adb_id = 0x2
  236. <7>[ 1.530872] usb_manufacturer_name = USB Developer
  237. <7>[ 1.530872] usb_product_name = Android
  238. <7>[ 1.539756] usb_serial_number = 20080411
  239. <7>[ 1.539756] msc_vendor_name = USB 2.0
  240. <7>[ 1.539756] msc_product_name = USB Flash Driver
  241. <7>[ 1.553164] msc_release = 100
  242. <7>[ 1.553164] luns = 3
  243. <7>[ 1.560660] ---------------------------
  244. <7>[ 1.560660] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
  245. <7>[ 1.571304] [sw_udc]: alloc request: ep(0xc079ed10, ep0, 64), req(0xe7bcc300)
  246. <7>[ 1.571304] WRN:L2703(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
  247. <7>[ 1.583770] [sw_udc]: sw_udc_pullup, is_on = 0
  248. <7>[ 1.590932] WRN:L2738(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
  249. <6>[ 1.599530] android_usb gadget: Mass Storage Function, version: 2009/09/11
  250. <6>[ 1.599530] android_usb gadget: Number of LUNs=3
  251. <6>[ 1.611812] lun0: LUN: removable file: (no medium)
  252. <6>[ 1.611812] lun1: LUN: removable file: (no medium)
  253. <6>[ 1.621601] lun2: LUN: removable file: (no medium)
  254. <7>[ 1.621601] lun name: lun
  255. <7>[ 1.621601] lun name: lun1
  256. <7>[ 1.631824] lun name: lun2
  257. <7>[ 1.631824] WRN:L2703(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
  258. <6>[ 1.640038] android_usb gadget: android_usb ready
  259. <6>[ 1.640038] mousedev: PS/2 mouse device common for all mice
  260. <3>[ 1.653149] ft5x_ts: script_parser_fetch err.
  261. <6>[ 1.653149] input: sun4i-keyboard as /devices/virtual/input/input0
  262. <7>[ 1.664057] ==register_early_suspend =
  263. <7>[ 1.664057] sunxi RTC version 0.1
  264. <6>[ 1.671790] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881
  265. <6>[ 1.671790] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  266. <6>[ 1.683213] sunxi-rtc sunxi-rtc: read time 2012-5-3 15:37:11
  267. <6>[ 1.683213] using rtc device, rtc, for alarms
  268. <6>[ 1.693267] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  269. <6>[ 1.699583] i2c /dev entries driver
  270. <7>[ 1.699583] !!! base_Addr = 0xe88b6c00
  271. <7>[ 1.699583] config i2c gpio with gpio_config api
  272. <7>[ 1.711771] twi0, apb clock = 24000000
  273. <6>[ 1.711771] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
  274. <7>[ 1.722189] [AXP]axp driver uning configuration failed(323)
  275. <7>[ 1.722189] [AXP]power_start = 0
  276. <6>[ 1.732016] I2C: i2c-0: AW16XX I2C adapter
  277. <7>[ 1.732016] **********start************
  278. <7>[ 1.739987] 0x40
  279. <7>[ 1.739987] 0xf8
  280. <7>[ 1.739987] 0x28
  281. <7>[ 1.739987] 0x0
  282. <7>[ 1.739987] 0x0
  283. <7>[ 1.739987] **********end************
  284. <7>[ 1.753089] !!! base_Addr = 0xe88b8000
  285. <7>[ 1.753089] twi1, apb clock = 24000000
  286. <6>[ 1.760849] I2C: i2c-1: AW16XX I2C adapter
  287. <7>[ 1.760849] **********start************
  288. <7>[ 1.760849] 0x40
  289. <7>[ 1.770905] 0xf8
  290. <7>[ 1.770905] 0x58
  291. <7>[ 1.770905] 0x0
  292. <7>[ 1.770905] 0x0
  293. <7>[ 1.770905] **********end************
  294. <7>[ 1.782086] !!! base_Addr = 0xe88ba400
  295. <7>[ 1.782086] twi2, apb clock = 24000000
  296. <6>[ 1.789835] I2C: i2c-2: AW16XX I2C adapter
  297. <7>[ 1.789835] **********start************
  298. <7>[ 1.789835] 0x40
  299. <7>[ 1.799873] 0xf8
  300. <7>[ 1.799873] 0x58
  301. <7>[ 1.799873] 0x0
  302. <7>[ 1.799873] 0x0
  303. <7>[ 1.799873] **********end************
  304. <6>[ 1.811053] lirc_dev: IR Remote Control driver registered, major 249
  305. <6>[ 1.811053] IR NEC protocol handler initialized
  306. <6>[ 1.822153] IR RC5(x) protocol handler initialized
  307. <6>[ 1.822153] IR RC6 protocol handler initialized
  308. <6>[ 1.831477] IR JVC protocol handler initialized
  309. <6>[ 1.831477] IR Sony protocol handler initialized
  310. <6>[ 1.840624] IR RC5 (streamzap) protocol handler initialized
  311. <6>[ 1.840624] IR LIRC bridge handler initialized
  312. <6>[ 1.850636] Linux video capture interface: v2.00
  313. <7>[ 1.850636] [cedar dev]: install start!!!
  314. <7>[ 1.859547] [cedar dev]: install end!!!
  315. <7>[ 1.859547] [ace_drv] start!!!
  316. <7>[ 1.859547] [ace_drv] init end!!!
  317. <7>[ 1.870133] [pa_drv] start!!!
  318. <7>[ 1.870133] [pa_drv] init end!!!
  319. <6>[ 1.870133] print_constraints: axp20_ldo1: 1300 mV
  320. <6>[ 1.881568] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  321. <6>[ 1.889547] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  322. <6>[ 1.889547] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  323. <6>[ 1.904172] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
  324. <6>[ 1.911715] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
  325. <6>[ 1.919550] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  326. <6>[ 1.919550] input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
  327. <7>[ 1.939555] pmu_pekoff_time = 6000
  328. <7>[ 1.939555] pmu_pekoff_en = 1
  329. <7>[ 1.939555] pmu_peklong_time = 1500
  330. <7>[ 1.951879] pmu_pekon_time = 1000
  331. <7>[ 1.951879] pmu_pwrok_time = 64
  332. <7>[ 1.951879] pmu_pwrnoe_time = 2000
  333. <7>[ 1.961734] pmu_intotp_en = 1
  334. <7>[ 1.961734] [AXP]1823-->0x42
  335. <7>[ 1.961734] POWER20_PEK_SET:1842-->0x9d
  336. <7>[ 1.972275] POWER20_PEK_SET:1853-->0x9d
  337. <7>[ 1.972275] POWER20_PEK_SET:1862-->0x9d
  338. <7>[ 1.980809] POWER20_PEK_SET:1873-->0x9d
  339. <7>[ 1.980809] POWER20_PEK_SET:1885-->0x9d
  340. <7>[ 1.989553] POWER20_HOTOVER_CTL:1894-->0xad
  341. <7>[ 1.989553] Cur_CoulombCounter = 0
  342. <7>[ 2.001629] last_rest_vol = 32, now_rest_vol = 33
  343. <6>[ 2.001629] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  344. <6>[ 2.016680] device-mapper: multipath: version 1.3.0 loaded
  345. <6>[ 2.022553] device-mapper: multipath round-robin: version 1.0.0 loaded
  346. <6>[ 2.022553] device-mapper: multipath queue-length: version 0.1.0 loaded
  347. <6>[ 2.035723] device-mapper: multipath service-time: version 0.2.0 loaded
  348. <6>[ 2.042340] Bluetooth: HCI UART driver ver 2.2
  349. <6>[ 2.042340] Bluetooth: HCI H4 protocol initialized
  350. <6>[ 2.051832] Bluetooth: HCI BCSP protocol initialized
  351. <6>[ 2.051832] Bluetooth: HCILL protocol initialized
  352. <6>[ 2.061504] cpuidle: using governor ladder
  353. <7>[ 2.061504] [mmc_pm]: no sdio card used in configuration
  354. <7>[ 2.071115] [mmc]: sunximmc_init
  355. <7>[ 2.071115] [mmc]: sunxi mmc controller using config : 0x1
  356. <7>[ 2.079971] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  357. <7>[ 2.079971] [mmc]: mmc 0 power off !!
  358. <7>[ 2.090169] [mmc]: mmc0 Probe: base:0xe8914000 irq:32 dma:0 pdes:0xe7008000, ret 0.
  359. <6>[ 2.090169] usbcore: registered new interface driver usbhid
  360. <6>[ 2.104144] usbhid: USB HID core driver
  361. <6>[ 2.104144] logger: created 256K log 'log_main'
  362. <6>[ 2.112903] logger: created 256K log 'log_events'
  363. <6>[ 2.112903] logger: created 256K log 'log_radio'
  364. <6>[ 2.122430] logger: created 256K log 'log_system'
  365. <7>[ 2.122430] enter sun4i Audio codec!!!
  366. <6>[ 2.131545] sun4i audio support initialized
  367. <7>[ 2.131545] sun4i Audio codec successfully loaded..
  368. <6>[ 2.141497] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
  369. <6>[ 2.141497] ALSA device list:
  370. <6>[ 2.151438] #0: sun4i-CODEC Audio Codec
  371. <6>[ 2.151438] #1: sun4i-sndhdmi
  372. <6>[ 2.151438] Netfilter messages via NETLINK v0.30.
  373. <6>[ 2.163647] nf_conntrack version 0.5.0 (13025 buckets, 52100 max)
  374. <6>[ 2.169809] ctnetlink v0.93: registering with nfnetlink.
  375. <6>[ 2.169809] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  376. <6>[ 2.182612] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  377. <6>[ 2.182612] IPv4 over IPv4 tunneling driver
  378. <6>[ 2.192872] GRE over IPv4 demultiplexor driver
  379. <6>[ 2.192872] GRE over IPv4 tunneling driver
  380. <6>[ 2.201756] ip_tables: (C) 2000-2006 Netfilter Core Team
  381. <6>[ 2.201756] TCP cubic registered
  382. <6>[ 2.210982] Initializing XFRM netlink socket
  383. <6>[ 2.210982] NET: Registered protocol family 10
  384. <6>[ 2.220439] ip6_tables: (C) 2000-2006 Netfilter Core Team
  385. <6>[ 2.220439] IPv6 over IPv4 tunneling driver
  386. <6>[ 2.230941] NET: Registered protocol family 17
  387. <6>[ 2.230941] NET: Registered protocol family 15
  388. <6>[ 2.240682] Bluetooth: RFCOMM TTY layer initialized
  389. <6>[ 2.240682] Bluetooth: RFCOMM socket layer initialized
  390. <6>[ 2.250872] Bluetooth: RFCOMM ver 1.11
  391. <6>[ 2.250872] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  392. <6>[ 2.259986] Bluetooth: BNEP filters: protocol multicast
  393. <6>[ 2.259986] L2TP core driver, V2.0
  394. <6>[ 2.259986] PPPoL2TP kernel driver, V2.0
  395. <6>[ 2.272558] L2TP IP encapsulation support (L2TPv3)
  396. <6>[ 2.272558] L2TP netlink interface
  397. <6>[ 2.280844] L2TP ethernet pseudowire support (L2TPv3)
  398. <7>[ 2.280844] [mmc_pm]: No sdio card, please check your config !!
  399. <6>[ 2.292210] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  400. <4>[ 2.299927] [LCD] lcd_module_init
  401. <4>[ 2.939623] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
  402. <4>[ 2.953533] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
  403. <4>[ 2.961528] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
  404. <4>[ 2.969626] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
  405. <4>[ 2.969626] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
  406. <6>[ 2.985214] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  407. <6>[ 2.990303] sunxi-rtc sunxi-rtc: read time 2012-5-3 15:37:12
  408. <6>[ 2.990303] sunxi-rtc sunxi-rtc: setting system clock to 2012-05-03 15:37:12 UTC (1336059432)
  409. <6>[ 3.004502] Freeing init memory: 156K
  410. <3>[ 3.009644] init: could not import file /system/etc/init.local.rc
  411. <3>[ 3.009644] init: /init.sun4i.rc: 55: invalid option 'mkdir'
  412. <4>[ 3.022953] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  413. <7>[ 3.089651] [mmc]: mmc 0 detect change, present 1
  414. <3>[ 3.089651] init: width = 1024
  415. <3>[ 3.089651] init: height = 768
  416. <3>[ 3.101564] init: s.st_size = 3145728
  417. <6>[ 3.129648] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: (null)
  418. <6>[ 3.149645] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: (null)
  419. <6>[ 3.169652] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: (null)
  420. <7>[ 3.389680] [mmc]: mmc 0 power on !!
  421. <4>[ 3.389680] 01kernel used greatest stack depth: 5988 bytes left
  422. <7>[ 3.429674] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 52, RTO !!
  423. <7>[ 3.429674] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 52, RTO !!
  424. <7>[ 3.442229] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  425. <7>[ 3.453453] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  426. <7>[ 3.460803] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  427. <7>[ 3.470521] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  428. <6>[ 3.499676] EXT4-fs (nandd): re-mounted. Opts: noauto_da_alloc,barrier=0
  429. <4>[ 3.499676] mount used greatest stack depth: 5696 bytes left
  430. <6>[ 3.519679] mmc0: new high speed SDHC card at address 1234
  431. <6>[ 3.530442] mmcblk0: mmc0:1234 SA16G 14.6 GiB
  432. <6>[ 3.530442] mmcblk0: p1
  433. <6>[ 3.540236] EXT4-fs (nande): re-mounted. Opts: noauto_da_alloc,barrier=0
  434. <6>[ 4.219719] EXT4-fs (nandh): re-mounted. Opts: noauto_da_alloc,barrier=0
  435. <4>[ 4.230206] 04mount used greatest stack depth: 5504 bytes left
  436. <4>[ 4.309738] tee used greatest stack depth: 5304 bytes left
  437. <6>[ 6.199886] EXT4-fs (nandd): re-mounted. Opts: user_xattr,barrier=0,data=ordered,noauto_da_alloc
  438. <6>[ 6.259885] ecompass driver: init
  439. <6>[ 6.259885] input: ecompass_data as /devices/virtual/input/input2
  440. <6>[ 6.339891] mxc622x driver: init
  441. <7>[ 6.379897] ========gsensor_fetch_sysconfig_para===================
  442. <7>[ 6.379897] gsensor_fetch_sysconfig_para: after: gsensor_twi_addr is 0x15, dirty_addr_buf: 0x15. dirty_addr_buf[1]: 0xfffe
  443. <7>[ 6.409898] gsensor_fetch_sysconfig_para: tkey_twi_id is 1.
  444. <7>[ 6.409898] mxc622x_init: after fetch_sysconfig_para: normal_i2c: 0x15. normal_i2c[1]: 0xfffe
  445. <6>[ 6.426933] gsensor_detect: Detected chip mxc622x at adapter 1, address 0x15
  446. <7>[ 6.434306] mxc622x_probe, line is: 333.
  447. <6>[ 6.499901] ===========================ft5x_ts_init=====================
  448. <6>[ 6.515419] ft5x_ts VERSION =Rocky@inet@20120322.1644
  449. <7>[ 6.520671] m_inet_ctpState return false,continue deteck
  450. <6>[ 6.520671] ctp_fetch_sysconfig_para.
  451. <6>[ 6.530671] ctp_fetch_sysconfig_para: after: ctp_twi_addr is 0x38, dirty_addr_buf: 0x38. dirty_addr_buf[1]: 0xfffe
  452. <6>[ 6.540752] ctp_fetch_sysconfig_para: ctp_twi_id is 2.
  453. <6>[ 6.540752] ctp_fetch_sysconfig_para: screen_max_x = 1024.
  454. <6>[ 6.551642] ctp_fetch_sysconfig_para: screen_max_y = 768.
  455. <6>[ 6.551642] ctp_fetch_sysconfig_para: revert_x_flag = 0.
  456. <6>[ 6.562835] ctp_fetch_sysconfig_para: revert_y_flag = 0.
  457. <6>[ 6.570442] ctp_fetch_sysconfig_para: exchange_x_y_flag = 0.
  458. <3>[ 6.570442] ft5x_ts: script_parser_fetch err.
  459. <6>[ 6.580734] ctp_fetch_sysconfig_para: screen_rotate_flag = 0.
  460. <7>[ 6.580734] 3F dsw jicky
  461. <7>[ 6.580734] script parser fetch err.
  462. <4>[ 6.592936] touch panel tp_en request gpio fail!
  463. <6>[ 6.592936] ft5x_ts_init: after fetch_sysconfig_para: normal_i2c: 0x38. normal_i2c[1]: 0xfffe
  464. <7>[ 6.606344] script parser fetch err.
  465. <4>[ 6.610070] ctp_init_platform_resource: tp_wakeup request gpio fail!
  466. <6>[ 6.610070] ctp_reset.
  467. <6>[ 6.659920] ctp_detect: Detected chip ft5x_ts at adapter 2, address 0x38
  468. <6>[ 6.659920] ====ft5x_ts_probe begin=====.
  469. <7>[ 6.671338] I2C communication client->addr=56
  470. <7>[ 6.779931] ft5x06 Chip ID=0x79
  471. <7>[ 6.779931] I2C communication ok
  472. <6>[ 6.779931] input: ft5x_ts as /devices/virtual/input/input3
  473. <6>[ 6.792810] ==register_early_suspend =
  474. <6>[ 6.792810] CONFIG_FT5X0X_MULTITOUCH is defined.
  475. <6>[ 6.809926] ctp_set_irq_mode: config gpio to int mode.
  476. <6>[ 6.809926] INTERRUPT CONFIG
  477. <6>[ 6.819925] ==ft5x_ts_probe over =
  478. <7>[ 6.849929] UMP: UMP device driver loaded
  479. <7>[ 6.979939] Mali: mali--2244-rel0!
  480. <7>[ 6.989991] Mali: Mali device driver r2p4-02rel0 loaded
  481. <6>[ 7.249959] [CSI]Welcome to CSI driver
  482. <6>[ 7.263568] [CSI]csi_init
  483. <6>[ 7.263568] [CSI_ERR]fetch csi_flash_pol from sys_config failed
  484. <6>[ 7.275519] [CSI_ERR]fetch csi_flash from sys_config failed
  485. <6>[ 7.281204] [CSI_ERR]fetch csi_af_en from sys_config failed
  486. <6>[ 7.281204] [CSI]registered sub device,input_num = 0
  487. <6>[ 7.293968] [CSI]V4L2 device registered as video0
  488. <6>[ 7.369969] usbcore: registered new interface driver asix
  489. <6>[ 7.419986] usbcore: registered new interface driver qf9700
  490. <6>[ 7.459974] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  491. <6>[ 7.489980] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
  492. <6>[ 7.502009] usbcore: registered new interface driver rtl8150
  493. <3>[ 7.515580] android_usb: already disabled
  494. <7>[ 7.520710] ep_matches, wrn: endpoint already claimed, ep(0xc079ed50, 0xe7bb7000, ep1-bulk)
  495. <6>[ 7.535232] adb_bind_config
  496. <7>[ 7.540782] ep_matches, wrn: endpoint already claimed, ep(0xc079ed50, 0xe7bb7000, ep1-bulk)
  497. <7>[ 7.551894] ep_matches, wrn: endpoint already claimed, ep(0xc079ed90, 0xe7bb7000, ep2-bulk)
  498. <7>[ 7.562989] ep_matches, wrn: endpoint already claimed, ep(0xc079ed50, 0xe7bb7000, ep1-bulk)
  499. <7>[ 7.571746] ep_matches, wrn: endpoint already claimed, ep(0xc079ed90, 0xe7bb7000, ep2-bulk)
  500. <7>[ 7.581746] ep_matches, wrn: endpoint already claimed, ep(0xc079edd0, 0xe7bcdc80, ep3-bulk)
  501. <7>[ 7.581746] [sw_udc]: alloc request: ep(0xc079ee10, ep4-bulk, 512), req(0xe73a7340)
  502. <7>[ 7.591509] [sw_udc]: alloc request: ep(0xc079edd0, ep3-bulk, 512), req(0xe73a7380)
  503. <7>[ 7.604840] [sw_udc]: alloc request: ep(0xc079edd0, ep3-bulk, 512), req(0xe73a73c0)
  504. <7>[ 7.612650] [sw_udc]: alloc request: ep(0xc079edd0, ep3-bulk, 512), req(0xe73a7400)
  505. <7>[ 7.620440] [sw_udc]: alloc request: ep(0xc079edd0, ep3-bulk, 512), req(0xe73a7440)
  506. <7>[ 7.620440] [sw_udc]: sw_udc_pullup, is_on = 1
  507. <7>[ 7.630485] WRN:L2738(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
  508. <6>[ 7.640919] adb_open
  509. <6>[ 16.400689] warning: `zygote' uses 32-bit capabilities (legacy support in use)
  510. <6>[ 32.071836] request_suspend_state: wakeup (3->0) at 32072315883 (2012-05-03 15:37:41.570112911 UTC)
  511. <6>[ 32.831870] acc_open
  512. <6>[ 32.831870] acc_release
  513. <7>[ 33.181906] sw_usb_enable_hcd: usbc_num = 2
  514. <7>[ 33.211901] [sw-ehci2]: sw_usb_enable_ehci
  515. <7>[ 33.231894] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc0872aa8
  516. <7>[ 33.231894] [sw-ehci2]: open clock
  517. <7>[ 33.281897] [sw-ehci2]: Set USB Power ON
  518. <6>[ 33.301903] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  519. <6>[ 33.301903] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 2
  520. <6>[ 33.321905] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
  521. <6>[ 33.341907] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  522. <7>[ 33.341907] ehci_irq: port change detect
  523. <6>[ 33.351900] hub 2-0:1.0: USB hub found
  524. <6>[ 33.362006] hub 2-0:1.0: 1 port detected
  525. <7>[ 33.362006] [sw-ohci2]: sw_usb_enable_ohci
  526. <7>[ 33.431932] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc0872bb8
  527. <7>[ 33.431932] [sw-ohci2]: open clock
  528. <6>[ 33.681941] usb 2-1: new high speed USB device number 2 using sw-ehci
  529. <6>[ 33.701953] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  530. <6>[ 33.717968] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 3
  531. <6>[ 33.771939] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
  532. <6>[ 33.831963] hub 3-0:1.0: USB hub found
  533. <6>[ 33.831963] hub 3-0:1.0: 1 port detected
  534. <7>[ 33.861962] rtw driver version=v3.4.1_3418.20120217
  535. <7>[ 33.861962] Build at: Mar 30 2012 10:17:35
  536. <7>[ 33.891977] ##########rtw_suspend_lock_init ###########
  537. <7>[ 33.891977] register rtw_netdev_ops to netdev_ops
  538. <7>[ 33.911953] rtw_wdev_alloc
  539. <7>[ 33.911953] CHIP TYPE: RTL8188C_8192C
  540. <7>[ 33.911953]
  541. <7>[ 33.911953] usb_endpoint_descriptor(0):
  542. <7>[ 33.951951] bLength=7
  543. <7>[ 33.951951] bDescriptorType=5
  544. <7>[ 33.951951] bEndpointAddress=81
  545. <7>[ 33.951951] wMaxPacketSize=200
  546. <7>[ 33.991978] bInterval=0
  547. <7>[ 33.991978] RT_usb_endpoint_is_bulk_in = 1
  548. <7>[ 34.081986]
  549. <7>[ 34.081986] usb_endpoint_descriptor(1):
  550. <7>[ 34.081986] bLength=7
  551. <7>[ 34.081986] bDescriptorType=5
  552. <7>[ 34.151970] bEndpointAddress=2
  553. <7>[ 34.261992] wMaxPacketSize=200
  554. <7>[ 34.261992] bInterval=0
  555. <7>[ 34.261992] RT_usb_endpoint_is_bulk_out = 2
  556. <7>[ 34.331981]
  557. <7>[ 34.331981] usb_endpoint_descriptor(2):
  558. <7>[ 34.351983] bLength=7
  559. <7>[ 34.351983] bDescriptorType=5
  560. <7>[ 34.351983] bEndpointAddress=3
  561. <7>[ 34.351983] wMaxPacketSize=200
  562. <7>[ 34.441992] bInterval=0
  563. <7>[ 34.441992] RT_usb_endpoint_is_bulk_out = 3
  564. <7>[ 34.441992]
  565. <7>[ 34.441992] usb_endpoint_descriptor(3):
  566. <7>[ 34.511991] bLength=7
  567. <7>[ 34.511991] bDescriptorType=5
  568. <7>[ 34.511991] bEndpointAddress=84
  569. <7>[ 34.562010] wMaxPacketSize=40
  570. <7>[ 34.562010] bInterval=1
  571. <7>[ 34.562010] RT_usb_endpoint_is_int_in = 4, Interval = 1
  572. <7>[ 34.581997] nr_endpoint=4, in_num=2, out_num=2
  573. <7>[ 34.581997]
  574. <7>[ 34.602009] USB_SPEED_HIGH
  575. <7>[ 34.602009] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.
  576. <7>[ 34.602009] RF_Type is 3!!
  577. <7>[ 34.632014] EEPROM type is E-FUSE
  578. <7>[ 34.632014] ====> ReadAdapterInfo8192C
  579. <7>[ 34.632014] Boot from EFUSE, Autoload OK !
  580. <7>[ 34.872013] EEPROMVID = 0x0bda
  581. <7>[ 34.872013] EEPROMPID = 0x8176
  582. <7>[ 34.883862] EEPROMCustomerID : 0x00
  583. <7>[ 34.883862] EEPROMSubCustomerID: 0x00
  584. <7>[ 34.893862] RT_CustomerID: 0x00
  585. <7>[ 34.893862] _ReadMACAddress MAC Address from EFUSE = 00:0e:e8:12:71:b9
  586. <7>[ 34.904206] EEPROMRegulatory = 0x0
  587. <7>[ 34.904206] _ReadBoardType(0)
  588. <7>[ 34.904206] BT Coexistance = disable
  589. <7>[ 34.914257] RT_ChannelPlan: 0x0a
  590. <7>[ 34.914257] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
  591. <7>[ 34.925637] ### PS params=> power_mgnt(1),usbss_enable(0) ###
  592. <7>[ 34.925637] ### AntDivCfg(0)
  593. <7>[ 34.934600] readAdapterInfo_8192CU(): REPLACEMENT = 1
  594. <7>[ 34.934600] <==== ReadAdapterInfo8192C in 300 ms
  595. <7>[ 34.944336] rtw_register_early_suspend
  596. <7>[ 34.944336] rtw_macaddr_cfg MAC Address = 00:0e:e8:12:71:b9
  597. <7>[ 34.956246] MAC Address from pnetdev->dev_addr= 00:0e:e8:12:71:b9
  598. <7>[ 34.962594] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
  599. <6>[ 34.982046] usbcore: registered new interface driver rtl8192cu
  600. <4>[ 34.992046] Thread-51 used greatest stack depth: 5128 bytes left
  601. <3>[ 36.442136] init: untracked pid 586 exited
  602. <7>[ 37.132216] +871x_drv - drv_open, bup=0
  603. <7>[ 37.142182] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
  604. <7>[ 37.152971] FirmwareDownload92C accquire FW from embedded image
  605. <7>[ 37.212197] fw_ver=v79, fw_subver=0, sig=0x88c0
  606. <4>[ 37.302213] netd used greatest stack depth: 4864 bytes left
  607. <7>[ 37.312213] fw download ok!
  608. <7>[ 37.312213] Set RF Chip ID to RF_6052 and RF type to 1T1R.
  609. <7>[ 37.892255] IQK:Start!!!
  610. <7>[ 38.052275] Path A Rx IQK fail!!
  611. <7>[ 38.102263] Path A Rx IQK fail!!
  612. <7>[ 38.112506] Path A IQK Only Tx Success!!
  613. <7>[ 38.232278] Path A IQK Success!!
  614. <7>[ 38.252281] Path A Rx IQK fail!!
  615. <7>[ 38.252281] Path A Rx IQK fail!!
  616. <7>[ 38.272278] Path A IQK Only Tx Success!!
  617. <7>[ 38.282271] IQK: final_candidate is 0
  618. <7>[ 38.282271] IQK: RegE94=103 RegE9C=d RegEA4=0 RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
  619. <7>[ 38.282271] Path A IQ Calibration Success !
  620. <7>[ 38.312300] _PHY_PathAFillIQKMatrix only Tx OK
  621. <7>[ 38.452306] pdmpriv->TxPowerTrackControl = 1
  622. <7>[ 38.472290] MAC Address from REG_MACID = 00:0e:e8:12:71:b9
  623. <7>[ 38.472290] rtl8192cu_hal_init in 1340ms
  624. <7>[ 38.502290] MAC Address = 00:0e:e8:12:71:b9
  625. <7>[ 38.512318] rtw_cfg80211_init_wiphy:rf_type=3
  626. <7>[ 38.542312] -871x_drv - drv_open, bup=1
  627. <7>[ 38.542312] cfg80211_rtw_set_power_mgmt
  628. <6>[ 38.562322] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  629. <7>[ 38.582302] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
  630. <7>[ 38.582302] set_mode = IW_MODE_INFRA
  631. <7>[ 38.592293] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
  632. <7>[ 40.332434] survey done event(c)
  633. <7>[ 40.332434] rtw_cfg80211_indicate_scan_done without scan req
  634. <7>[ 40.344941] =>rtw_wx_set_essid
  635. <7>[ 40.344941] <=rtw_wx_set_essid, ret 0
  636. <7>[ 40.362432] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  637. <7>[ 40.362432] set_mode = IW_MODE_INFRA
  638. <7>[ 40.472453]
  639. <7>[ 40.472453] wpa_ie(length:22):
  640. <7>[ 40.472453] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x02
  641. <7>[ 40.542447] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  642. <7>[ 40.692491] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
  643. <7>[ 40.822484] Set BSSID under fw_state=0x00000008
  644. <7>[ 40.822484] [by_bssid:1][assoc_ssid:][to_roaming:0] new candidate: CASAHOME(30:46:9a:83:08:76) rssi:-76
  645. <7>[ 40.838892] rtw_select_and_join_from_scanned_queue: candidate: CASAHOME(30:46:9a:83:08:76)
  646. <7>[ 40.847187] rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
  647. <7>[ 40.853482] link to Broadcom AP
  648. <7>[ 40.853482] set ch/bw before connected
  649. <7>[ 40.882493] link to Broadcom AP
  650. <7>[ 40.882493] issue_deauth
  651. <7>[ 40.892493] OnAuthClient
  652. <7>[ 40.902912] network.SupportedRates[0]=82
  653. <7>[ 40.902912] network.SupportedRates[1]=84
  654. <7>[ 40.902912] network.SupportedRates[2]=8B
  655. <7>[ 40.914724] network.SupportedRates[3]=96
  656. <7>[ 40.914724] network.SupportedRates[4]=24
  657. <7>[ 40.922576] network.SupportedRates[5]=30
  658. <7>[ 40.922576] network.SupportedRates[6]=48
  659. <7>[ 40.922576] network.SupportedRates[7]=6C
  660. <7>[ 40.934340] network.SupportedRates[8]=0C
  661. <7>[ 40.934340] network.SupportedRates[9]=12
  662. <7>[ 40.934340] network.SupportedRates[10]=18
  663. <7>[ 40.946186] network.SupportedRates[11]=60
  664. <7>[ 40.946186] bssrate_len = 12
  665. <7>[ 40.953085] OnAssocRsp
  666. <7>[ 40.964054] report_join_res(2)
  667. <7>[ 40.964054] rtw_joinbss_update_network
  668. <7>[ 40.964054] +rtw_update_ht_cap()
  669. <7>[ 40.974152] rtw_joinbss_update_stainfo
  670. <7>[ 40.974152] rtw_cfg80211_indicate_connect
  671. <7>[ 40.974152] OnAction_back
  672. <7>[ 40.984616] OnAction_back, action=0
  673. <7>[ 40.984616] issue_action_BA, category=3, action=1, status=0
  674. <7>[ 40.993685] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  675. <7>[ 40.993685] WMM(0): 0, a42b
  676. <6>[ 41.042480] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  677. <7>[ 41.052495] WMM(1): 0, a44f
  678. <7>[ 41.052495] =>rtw_wx_set_essid
  679. <7>[ 41.052495] ssid=CASAHOME, len=8
  680. <7>[ 41.063513] WMM(2): 0, 5e4322
  681. <7>[ 41.063513] WMM(3): 0, 2f3222
  682. <7>[ 41.063513] [HW_VAR_ACM_CTRL] Write 0x0
  683. <7>[ 41.172505] HTOnAssocRsp
  684. <7>[ 41.192506] Set SSID under fw_state=0x00000009
  685. <7>[ 41.202820] rtw_cfg80211_indicate_disconnect
  686. <7>[ 41.202820] pwdev->sme_state=0
  687. <7>[ 41.202820] [by_bssid:0][assoc_ssid:CASAHOME][to_roaming:0] new candidate: CASAHOME(30:46:9a:83:08:76) rssi:-76
  688. <7>[ 41.220313] rtw_select_and_join_from_scanned_queue: candidate: CASAHOME(30:46:9a:83:08:76)
  689. <7>[ 41.228596] rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
  690. <7>[ 41.234886] link to Broadcom AP
  691. <7>[ 41.322527] <=rtw_wx_set_essid, ret 0
  692. <7>[ 41.352520] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
  693. <7>[ 41.432513] SetFwRsvdPagePkt
  694. <7>[ 41.432513] Set RSVD page location to Fw.
  695. <7>[ 41.532536] =>rtw_wx_set_essid
  696. <7>[ 41.552520] =>mlmeext_joinbss_event_callback
  697. <7>[ 41.552520] issue_deauth
  698. <7>[ 41.622543] <=rtw_wx_set_essid, ret 0
  699. <7>[ 41.722532] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  700. <7>[ 41.772554] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  701. <7>[ 41.832542] set ch/bw before connected
  702. <7>[ 41.872549] set_mode = IW_MODE_INFRA
  703. <7>[ 41.872549]
  704. <7>[ 41.872549] wpa_ie(length:22):
  705. <7>[ 41.962588] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x02
  706. <7>[ 41.962588] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  707. <7>[ 42.012564] link to Broadcom AP
  708. <7>[ 42.012564] issue_deauth
  709. <7>[ 42.012564] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
  710. <7>[ 42.024507] OnAuthClient
  711. <7>[ 42.024507] network.SupportedRates[0]=82
  712. <7>[ 42.034507] network.SupportedRates[1]=84
  713. <7>[ 42.034507] network.SupportedRates[2]=8B
  714. <7>[ 42.034507] network.SupportedRates[3]=96
  715. <7>[ 42.045617] network.SupportedRates[4]=24
  716. <7>[ 42.045617] network.SupportedRates[5]=30
  717. <7>[ 42.053466] network.SupportedRates[6]=48
  718. <7>[ 42.053466] network.SupportedRates[7]=6C
  719. <7>[ 42.053466] network.SupportedRates[8]=0C
  720. <7>[ 42.065231] network.SupportedRates[9]=12
  721. <7>[ 42.065231] network.SupportedRates[10]=18
  722. <7>[ 42.073164] network.SupportedRates[11]=60
  723. <7>[ 42.073164] bssrate_len = 12
  724. <7>[ 42.082574] OnAssocRsp
  725. <7>[ 42.082574] report_join_res(2)
  726. <7>[ 42.093440] rtw_joinbss_update_network
  727. <7>[ 42.093440] +rtw_update_ht_cap()
  728. <7>[ 42.093440] rtw_joinbss_update_stainfo
  729. <7>[ 42.104232] rtw_cfg80211_indicate_connect
  730. <7>[ 42.104232] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  731. <7>[ 42.132598] WMM(0): 0, a42b
  732. <7>[ 42.132598] WMM(1): 0, a44f
  733. <7>[ 42.132598] WMM(2): 0, 5e4322
  734. <7>[ 42.162587] Set BSSID under fw_state=0x00000009
  735. <7>[ 42.162587] [by_bssid:1][assoc_ssid:CASAHOME][to_roaming:0] new candidate: CASAHOME(30:46:9a:83:08:76) rssi:-76
  736. <7>[ 42.177676] rtw_select_and_join_from_scanned_queue: candidate: CASAHOME(30:46:9a:83:08:76)
  737. <7>[ 42.185961] rtw_select_and_join_from_scanned_queue: _FW_LINKED while ask_for_joinbss!!!
  738. <7>[ 42.193970] rtw_cfg80211_indicate_disconnect
  739. <7>[ 42.193970] pwdev->sme_state=0
  740. <7>[ 42.193970] rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
  741. <7>[ 42.207633] link to Broadcom AP
  742. <7>[ 42.217633] =>rtw_wx_set_essid
  743. <7>[ 42.217633] ssid=CASAHOME, len=8
  744. <7>[ 42.217633] Set SSID under fw_state=0x00000008
  745. <7>[ 42.226698] [by_bssid:0][assoc_ssid:CASAHOME][to_roaming:0] new candidate: CASAHOME(30:46:9a:83:08:76) rssi:-76
  746. <7>[ 42.236823] rtw_select_and_join_from_scanned_queue: candidate: CASAHOME(30:46:9a:83:08:76)
  747. <7>[ 42.245096] rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
  748. <7>[ 42.245096] link to Broadcom AP
  749. <7>[ 42.282578] WMM(3): 0, 2f3222
  750. <7>[ 42.282578] [HW_VAR_ACM_CTRL] Write 0x0
  751. <7>[ 42.282578] HTOnAssocRsp
  752. <7>[ 42.312598] <=rtw_wx_set_essid, ret 0
  753. <7>[ 42.372599] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
  754. <7>[ 42.422601] =>rtw_wx_set_essid
  755. <7>[ 42.422601] <=rtw_wx_set_essid, ret 0
  756. <7>[ 42.422601] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  757. <7>[ 42.472612] set_mode = IW_MODE_INFRA
  758. <7>[ 42.472612]
  759. <7>[ 42.472612] wpa_ie(length:22):
  760. <7>[ 42.472612] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x02
  761. <7>[ 42.486646] SetFwRsvdPagePkt
  762. <7>[ 42.486646] Set RSVD page location to Fw.
  763. <7>[ 42.542590] OnAction_back
  764. <7>[ 42.572605] =>mlmeext_joinbss_event_callback
  765. <7>[ 42.572605] issue_deauth
  766. <7>[ 42.582603] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  767. <7>[ 42.582603] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
  768. <7>[ 42.595994] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  769. <7>[ 42.652593] set ch/bw before connected
  770. <7>[ 42.672659] set ch/bw before connected
  771. <7>[ 42.692592] Set BSSID under fw_state=0x00000088
  772. <7>[ 42.692592] =>rtw_wx_set_essid
  773. <7>[ 42.722594] link to Broadcom AP
  774. <7>[ 42.733060] issue_deauth
  775. <7>[ 42.742601] ssid=CASAHOME, len=8
  776. <7>[ 42.742601] OnAuthClient
  777. <7>[ 42.742601] network.SupportedRates[0]=82
  778. <7>[ 42.742601] network.SupportedRates[1]=84
  779. <7>[ 42.756396] network.SupportedRates[2]=8B
  780. <7>[ 42.756396] network.SupportedRates[3]=96
  781. <7>[ 42.764256] network.SupportedRates[4]=24
  782. <7>[ 42.764256] network.SupportedRates[5]=30
  783. <7>[ 42.764256] network.SupportedRates[6]=48
  784. <7>[ 42.776017] network.SupportedRates[7]=6C
  785. <7>[ 42.776017] network.SupportedRates[8]=0C
  786. <7>[ 42.783863] network.SupportedRates[9]=12
  787. <7>[ 42.783863] network.SupportedRates[10]=18
  788. <7>[ 42.783863] network.SupportedRates[11]=60
  789. <7>[ 42.795801] bssrate_len = 12
  790. <7>[ 42.802601] OnAssocRsp
  791. <7>[ 42.802601] report_join_res(2)
  792. <7>[ 42.813451] rtw_joinbss_update_network
  793. <7>[ 42.813451] +rtw_update_ht_cap()
  794. <7>[ 42.813451] rtw_joinbss_update_stainfo
  795. <7>[ 42.824210] rtw_cfg80211_indicate_connect
  796. <7>[ 42.824210] rx bc/mc packets, to perform sw rtw_tkip_decrypt
  797. <7>[ 42.837531]
  798. <7>[ 42.837531] recvframe_chkmic:didn't install group key!!!!!!!!!!
  799. <7>[ 42.855095] Set SSID under fw_state=0x00000009
  800. <7>[ 42.855095] [by_bssid:0][assoc_ssid:CASAHOME][to_roaming:0] new candidate: CASAHOME(30:46:9a:83:08:76) rssi:-76
  801. <7>[ 42.867430] rtw_select_and_join_from_scanned_queue: candidate: CASAHOME(30:46:9a:83:08:76)
  802. <7>[ 42.875716] rtw_select_and_join_from_scanned_queue: _FW_LINKED while ask_for_joinbss!!!
  803. <7>[ 42.885716] rtw_cfg80211_indicate_disconnect
  804. <7>[ 42.885716] pwdev->sme_state=0
  805. <7>[ 42.885716] rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
  806. <7>[ 42.897418] link to Broadcom AP
  807. <7>[ 42.972624] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  808. <7>[ 43.022696] WMM(0): 0, a42b
  809. <7>[ 43.022696] WMM(1): 0, a44f
  810. <7>[ 43.022696] WMM(2): 0, 5e4322
  811. <7>[ 43.034768] link to Broadcom AP
  812. <7>[ 43.034768] issue_deauth
  813. <7>[ 43.044768] OnAuthClient
  814. <7>[ 43.044768] network.SupportedRates[0]=82
  815. <7>[ 43.056159] network.SupportedRates[1]=84
  816. <7>[ 43.056159] network.SupportedRates[2]=8B
  817. <7>[ 43.064020] network.SupportedRates[3]=96
  818. <7>[ 43.064020] network.SupportedRates[4]=24
  819. <7>[ 43.064020] network.SupportedRates[5]=B0
  820. <7>[ 43.075783] network.SupportedRates[6]=48
  821. <7>[ 43.075783] network.SupportedRates[7]=6C
  822. <7>[ 43.083630] network.SupportedRates[8]=8C
  823. <7>[ 43.083630] network.SupportedRates[9]=12
  824. <7>[ 43.083630] network.SupportedRates[10]=98
  825. <7>[ 43.095481] network.SupportedRates[11]=60
  826. <7>[ 43.095481] bssrate_len = 12
  827. <7>[ 43.105481] OnAssocRsp
  828. <7>[ 43.114737] report_join_res(2)
  829. <7>[ 43.122634] <=rtw_wx_set_essid, ret 0
  830. <7>[ 43.142652] WMM(3): 0, 2f3222
  831. <7>[ 43.142652] [HW_VAR_ACM_CTRL] Write 0x0
  832. <7>[ 43.142652] HTOnAssocRsp
  833. <7>[ 43.192646] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
  834. <7>[ 43.192646] SetFwRsvdPagePkt
  835. <7>[ 43.252647] Set RSVD page location to Fw.
  836. <7>[ 43.252647] =>mlmeext_joinbss_event_callback
  837. <7>[ 43.272638] issue_deauth
  838. <7>[ 43.322670] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  839. <7>[ 43.362644] set ch/bw before connected
  840. <7>[ 43.382663] HW_VAR_BASIC_RATE: BrateCfg(0xd)
  841. <7>[ 43.382663] WMM(0): 0, a42b
  842. <7>[ 43.412659] WMM(1): 0, a44f
  843. <7>[ 43.412659] WMM(2): 0, 5e4322
  844. <7>[ 43.412659] WMM(3): 0, 2f3222
  845. <7>[ 43.442673] [HW_VAR_ACM_CTRL] Write 0x0
  846. <7>[ 43.442673] link to Broadcom AP
  847. <7>[ 43.442673] issue_deauth
  848. <7>[ 43.452785] OnAuthClient
  849. <7>[ 43.452785] network.SupportedRates[0]=82
  850. <7>[ 43.466516] network.SupportedRates[1]=84
  851. <7>[ 43.466516] network.SupportedRates[2]=8B
  852. <7>[ 43.474374] network.SupportedRates[3]=96
  853. <7>[ 43.474374] network.SupportedRates[4]=24
  854. <7>[ 43.474374] network.SupportedRates[5]=30
  855. <7>[ 43.486143] network.SupportedRates[6]=48
  856. <7>[ 43.486143] network.SupportedRates[7]=6C
  857. <7>[ 43.493991] network.SupportedRates[8]=0C
  858. <7>[ 43.493991] network.SupportedRates[9]=12
  859. <7>[ 43.493991] network.SupportedRates[10]=18
  860. <7>[ 43.505842] network.SupportedRates[11]=60
  861. <7>[ 43.505842] bssrate_len = 12
  862. <7>[ 43.512755] OnAssocRsp
  863. <7>[ 43.522837] report_join_res(2)
  864. <7>[ 43.532668] HTOnAssocRsp
  865. <7>[ 43.552658] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
  866. <7>[ 43.562666] SetFwRsvdPagePkt
  867. <7>[ 43.562666] Set RSVD page location to Fw.
  868. <7>[ 43.612698] =>mlmeext_joinbss_event_callback
  869. <7>[ 43.612698] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  870. <7>[ 43.642679] WMM(0): 0, a42b
  871. <7>[ 43.682679] WMM(1): 0, a44f
  872. <7>[ 43.682679] WMM(2): 0, 5e4322
  873. <7>[ 43.682679] WMM(3): 0, 2f3222
  874. <7>[ 43.682679] [HW_VAR_ACM_CTRL] Write 0x0
  875. <7>[ 43.712696] HTOnAssocRsp
  876. <7>[ 43.722696] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
  877. <7>[ 43.762677] SetFwRsvdPagePkt
  878. <7>[ 43.762677] Set RSVD page location to Fw.
  879. <7>[ 43.762677] =>mlmeext_joinbss_event_callback
  880. <7>[ 45.152785] survey done event(5)
  881. <7>[ 45.182776] =>rtw_wx_set_essid
  882. <7>[ 45.182776] <=rtw_wx_set_essid, ret 0
  883. <7>[ 45.195413] rtw_cfg80211_indicate_scan_done without scan req
  884. <7>[ 45.195413] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  885. <7>[ 45.252795] set_mode = IW_MODE_INFRA
  886. <7>[ 45.252795]
  887. <7>[ 45.252795] wpa_ie(length:22):
  888. <7>[ 45.282795] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x02
  889. <7>[ 45.282795] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  890. <7>[ 45.293565] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
  891. <7>[ 45.302794] Set BSSID under fw_state=0x00000008
  892. <7>[ 45.302794] [by_bssid:1][assoc_ssid:CASAHOME][to_roaming:0] new candidate: CASAHOME(30:46:9a:83:08:76) rssi:-76
  893. <7>[ 45.319128] rtw_select_and_join_from_scanned_queue: candidate: CASAHOME(30:46:9a:83:08:76)
  894. <7>[ 45.327424] rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
  895. <7>[ 45.333712] link to Broadcom AP
  896. <7>[ 45.333712] issue_deauth
  897. <7>[ 45.342799] =>rtw_wx_set_essid
  898. <7>[ 45.342799] ssid=CASAHOME, len=8
  899. <7>[ 45.342799] Set SSID under fw_state=0x00000088
  900. <7>[ 45.353782] set ch/bw before connected
  901. <7>[ 45.353782] <=rtw_wx_set_essid, ret 0
  902. <7>[ 45.492813] link to Broadcom AP
  903. <7>[ 45.492813] issue_deauth
  904. <7>[ 45.502806] OnAuthClient
  905. <7>[ 45.502806] network.SupportedRates[0]=82
  906. <7>[ 45.513657] network.SupportedRates[1]=84
  907. <7>[ 45.513657] network.SupportedRates[2]=8B
  908. <7>[ 45.513657] network.SupportedRates[3]=96
  909. <7>[ 45.525460] network.SupportedRates[4]=24
  910. <7>[ 45.525460] network.SupportedRates[5]=30
  911. <7>[ 45.533304] network.SupportedRates[6]=48
  912. <7>[ 45.533304] network.SupportedRates[7]=6C
  913. <7>[ 45.533304] network.SupportedRates[8]=0C
  914. <7>[ 45.545069] network.SupportedRates[9]=12
  915. <7>[ 45.545069] network.SupportedRates[10]=18
  916. <7>[ 45.552998] network.SupportedRates[11]=60
  917. <7>[ 45.552998] bssrate_len = 12
  918. <7>[ 45.562819] OnAssocRsp
  919. <7>[ 45.573137] report_join_res(2)
  920. <7>[ 45.573137] rtw_joinbss_update_network
  921. <7>[ 45.573137] +rtw_update_ht_cap()
  922. <7>[ 45.583216] rtw_joinbss_update_stainfo
  923. <7>[ 45.583216] rtw_cfg80211_indicate_connect
  924. <7>[ 45.583216] OnAction_back
  925. <7>[ 45.593681] OnAction_back, action=0
  926. <7>[ 45.593681] issue_action_BA, category=3, action=1, status=0
  927. <7>[ 45.602802] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  928. <7>[ 45.612818] WMM(0): 0, a42b
  929. <7>[ 45.612818] WMM(1): 0, a44f
  930. <7>[ 45.642827] WMM(2): 0, 5e4322
  931. <7>[ 45.642827] WMM(3): 0, 2f3222
  932. <7>[ 45.653403]
  933. <7>[ 45.653403] ~~~~stastakey:unicastkey
  934. <7>[ 45.692843]
  935. <7>[ 45.692843] ~~~~stastakey:groupkey
  936. <7>[ 45.702846] ==> rtw_set_key algorithm(2),keyid(1),key_mask(2)
  937. <7>[ 45.722847] [HW_VAR_ACM_CTRL] Write 0x0
  938. <7>[ 45.832835] HTOnAssocRsp
  939. <7>[ 45.842858] update raid entry, mask=0xfffff, arg=0xa0
  940. <7>[ 45.902865] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
  941. <7>[ 45.902865] SetFwRsvdPagePkt
  942. <7>[ 45.952850] Set RSVD page location to Fw.
  943. <7>[ 45.952850] =>mlmeext_joinbss_event_callback
  944. <7>[ 46.542894] rtl8192c_dm_RF_Saving(): RF_Normal
  945. <7>[ 50.543208] rtw_set_ps_mode(): Enter 802.11 power save mode...
  946. <7>[ 50.543208] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
  947. <7>[ 51.013226] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
  948. <7>[ 51.013226] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
  949. <7>[ 51.463277] wlan0: no IPv6 routers present
  950. <6>[ 57.583724] binder: release 887:903 transaction 11072 in, still active
  951. <6>[ 57.598893] binder: send failed reply for transaction 11072 to 1136:1171
  952. <7>[ 60.543917] rtw_set_ps_mode(): Enter 802.11 power save mode...
  953. <7>[ 60.543917] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
  954. <7>[ 72.544839] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
  955. <7>[ 72.544839] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
  956. <7>[ 74.544986] rtw_set_ps_mode(): Enter 802.11 power save mode...
  957. <7>[ 74.544986] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
  958. <7>[ 88.546002] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
  959. <7>[ 88.546002] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
  960. <7>[ 90.546151] rtw_set_ps_mode(): Enter 802.11 power save mode...
  961. <7>[ 90.546151] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
  962. <7>[ 94.996480] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
  963. <7>[ 94.996480] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
  964. <7>[ 96.546597] rtw_set_ps_mode(): Enter 802.11 power save mode...
  965. <7>[ 96.546597] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!