Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-38) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 03:59:20 UTC 2011
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=f645c421-e77f-4078-9654-3307e14c7e86 ro quiet
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
- [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
- [ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000007ffbe000 - 000000007fff0000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
- [ 0.000000] DMI present.
- [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-D3FFF write-protect
- [ 0.000000] D4000-DFFFF uncachable
- [ 0.000000] E0000-EFFFF write-through
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 disabled
- [ 0.000000] 2 disabled
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] init_memory_mapping: 0000000000000000-000000007ffb0000
- [ 0.000000] 0000000000 - 007fe00000 page 2M
- [ 0.000000] 007fe00000 - 007ffb0000 page 4k
- [ 0.000000] kernel direct mapping tables up to 7ffb0000 @ 10000-14000
- [ 0.000000] RAMDISK: 3771b000 - 37fef17a
- [ 0.000000] ACPI: RSDP 00000000000f9ed0 00024 (v02 ACPIAM)
- [ 0.000000] ACPI: XSDT 000000007ffb0100 00054 (v01 Shuttl Shuttle 20110623 MSFT 00000097)
- [ 0.000000] ACPI: FACP 000000007ffb0290 000F4 (v04 062311 FACP1651 20110623 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 000000007ffb05c0 06645 (v02 XS35V XS35V10 00000200 INTL 20051117)
- [ 0.000000] ACPI: FACS 000000007ffbe000 00040
- [ 0.000000] ACPI: APIC 000000007ffb0390 0006C (v02 062311 APIC1651 20110623 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 000000007ffb0400 0003C (v01 062311 OEMMCFG 20110623 MSFT 00000097)
- [ 0.000000] ACPI: SLIC 000000007ffb0440 00176 (v01 Shuttl Shuttle 20110623 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 000000007ffbe040 00072 (v01 062311 OEMB1651 20110623 MSFT 00000097)
- [ 0.000000] ACPI: HPET 000000007ffba5c0 00038 (v01 062311 OEMHPET 20110623 MSFT 00000097)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at 0000000000000000-000000007ffb0000
- [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ffb0000
- [ 0.000000] NODE_DATA [0000000000012000 - 0000000000019fff]
- [ 0.000000] bootmap [000000000001a000 - 0000000000029ff7] pages 10
- [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007ffb0000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
- [ 0.000000] #2 [0001000000 - 000168a594] TEXT DATA BSS ==> [0001000000 - 000168a594]
- [ 0.000000] #3 [003771b000 - 0037fef17a] RAMDISK ==> [003771b000 - 0037fef17a]
- [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
- [ 0.000000] #5 [000168b000 - 000168b1bf] BRK ==> [000168b000 - 000168b1bf]
- [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
- [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
- [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x00100000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x0007ffb0
- [ 0.000000] On node 0 totalpages: 524095
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 101 pages reserved
- [ 0.000000] DMA zone: 3826 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 7111 pages used for memmap
- [ 0.000000] DMA32 zone: 513001 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u524288
- [ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516827
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=f645c421-e77f-4078-9654-3307e14c7e86 ro quiet
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 2051164k/2096832k available (3081k kernel code, 452k absent, 45216k reserved, 1889k data, 592k init)
- [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:4352 nr_irqs:440
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1795.437 MHz processor.
- [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3590.87 BogoMIPS (lpj=7181748)
- [ 0.004051] Security Framework initialized
- [ 0.004058] SELinux: Disabled at boot.
- [ 0.004455] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.008334] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.009110] Mount-cache hash table entries: 256
- [ 0.009370] Initializing cgroup subsys ns
- [ 0.009379] Initializing cgroup subsys cpuacct
- [ 0.009388] Initializing cgroup subsys devices
- [ 0.009393] Initializing cgroup subsys freezer
- [ 0.009397] Initializing cgroup subsys net_cls
- [ 0.009439] CPU: L1 I cache: 32K, L1 D cache: 24K
- [ 0.009444] CPU: L2 cache: 512K
- [ 0.009450] CPU 0/0x0 -> Node 0
- [ 0.009454] CPU: Physical Processor ID: 0
- [ 0.009457] CPU: Processor Core ID: 0
- [ 0.009462] mce: CPU supports 5 MCE banks
- [ 0.009474] CPU0: Thermal monitoring enabled (TM1)
- [ 0.009481] using mwait in idle threads.
- [ 0.009485] Performance Events: Atom events, Intel PMU driver.
- [ 0.009495] ... version: 3
- [ 0.009498] ... bit width: 40
- [ 0.009501] ... generic registers: 2
- [ 0.009505] ... value mask: 000000ffffffffff
- [ 0.009509] ... max period: 000000007fffffff
- [ 0.009513] ... fixed-purpose events: 3
- [ 0.009516] ... event mask: 0000000700000003
- [ 0.010843] ACPI: Core revision 20090903
- [ 0.024105] Setting APIC routing to flat
- [ 0.024434] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.066604] CPU0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz stepping 0a
- [ 0.068001] Booting processor 1 APIC 0x2 ip 0x6000
- [ 0.008000] Initializing CPU#1
- [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
- [ 0.008000] CPU: L2 cache: 512K
- [ 0.008000] CPU 1/0x2 -> Node 0
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 1
- [ 0.008000] CPU1: Thermal monitoring enabled (TM1)
- [ 0.152088] CPU1: Intel(R) Atom(TM) CPU D525 @ 1.80GHz stepping 0a
- [ 0.152101] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- [ 0.156175] Booting processor 2 APIC 0x1 ip 0x6000
- [ 0.008000] Initializing CPU#2
- [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
- [ 0.008000] CPU: L2 cache: 512K
- [ 0.008000] CPU 2/0x1 -> Node 0
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 0
- [ 0.008000] CPU2: Thermal monitoring enabled (TM1)
- [ 0.244148] CPU2: Intel(R) Atom(TM) CPU D525 @ 1.80GHz stepping 0a
- [ 0.244161] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
- [ 0.248209] Booting processor 3 APIC 0x3 ip 0x6000
- [ 0.008000] Initializing CPU#3
- [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
- [ 0.008000] CPU: L2 cache: 512K
- [ 0.008000] CPU 3/0x3 -> Node 0
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 1
- [ 0.008000] CPU3: Thermal monitoring enabled (TM1)
- [ 0.336047] CPU3: Intel(R) Atom(TM) CPU D525 @ 1.80GHz stepping 0a
- [ 0.336059] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
- [ 0.340025] Brought up 4 CPUs
- [ 0.340031] Total of 4 processors activated (14363.85 BogoMIPS).
- [ 0.341504] CPU0 attaching sched-domain:
- [ 0.341512] domain 0: span 0,2 level SIBLING
- [ 0.341517] groups: group ffff88000180fae0 cpus 0 (cpu_power = 589) group ffff88000190fae0 cpus 2 (cpu_power = 589)
- [ 0.341532] domain 1: span 0,2 level MC
- [ 0.341537] groups: group ffff88000180fbf0 cpus 0,2 (cpu_power = 1178)
- [ 0.341547] domain 2: span 0-3 level CPU
- [ 0.341552] groups: group ffff88000180fd00 cpus 0,2 (cpu_power = 1178) group ffff88000188fd00 cpus 1,3 (cpu_power = 1178)
- [ 0.341570] CPU1 attaching sched-domain:
- [ 0.341575] domain 0: span 1,3 level SIBLING
- [ 0.341579] groups: group ffff88000188fae0 cpus 1 (cpu_power = 589) group ffff88000198fae0 cpus 3 (cpu_power = 589)
- [ 0.341593] domain 1: span 1,3 level MC
- [ 0.341597] groups: group ffff88000188fbf0 cpus 1,3 (cpu_power = 1178)
- [ 0.341607] domain 2: span 0-3 level CPU
- [ 0.341611] groups: group ffff88000188fd00 cpus 1,3 (cpu_power = 1178) group ffff88000180fd00 cpus 0,2 (cpu_power = 1178)
- [ 0.341627] CPU2 attaching sched-domain:
- [ 0.341632] domain 0: span 0,2 level SIBLING
- [ 0.341637] groups: group ffff88000190fae0 cpus 2 (cpu_power = 589) group ffff88000180fae0 cpus 0 (cpu_power = 589)
- [ 0.341650] domain 1: span 0,2 level MC
- [ 0.341655] groups: group ffff88000180fbf0 cpus 0,2 (cpu_power = 1178)
- [ 0.341664] domain 2: span 0-3 level CPU
- [ 0.341669] groups: group ffff88000180fd00 cpus 0,2 (cpu_power = 1178) group ffff88000188fd00 cpus 1,3 (cpu_power = 1178)
- [ 0.341684] CPU3 attaching sched-domain:
- [ 0.341689] domain 0: span 1,3 level SIBLING
- [ 0.341694] groups: group ffff88000198fae0 cpus 3 (cpu_power = 589) group ffff88000188fae0 cpus 1 (cpu_power = 589)
- [ 0.341707] domain 1: span 1,3 level MC
- [ 0.341711] groups: group ffff88000188fbf0 cpus 1,3 (cpu_power = 1178)
- [ 0.341721] domain 2: span 0-3 level CPU
- [ 0.341725] groups: group ffff88000188fd00 cpus 1,3 (cpu_power = 1178) group ffff88000180fd00 cpus 0,2 (cpu_power = 1178)
- [ 0.342022] devtmpfs: initialized
- [ 0.346652] regulator: core version 0.5
- [ 0.346652] NET: Registered protocol family 16
- [ 0.346652] ACPI: bus type pci registered
- [ 0.346652] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.346652] PCI: Not using MMCONFIG.
- [ 0.346652] PCI: Using configuration type 1 for base access
- [ 0.348255] bio: create slab <bio-0> at 0
- [ 0.349034] ACPI: EC: Look up EC in DSDT
- [ 0.352063] ACPI Error: No handler for Region [ECRM] (ffff88007fb2df30) [EmbeddedControl] (20090903/evregion-319)
- [ 0.352076] ACPI Error: Region EmbeddedControl(3) has no handler (20090903/exfldio-295)
- [ 0.352088] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_._REG] (Node ffff88007fb30280), AE_NOT_EXIST
- [ 0.352725] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.361276] ACPI: EC: GPE storm detected, transactions will use polling mode
- [ 0.848087] ACPI: Interpreter enabled
- [ 0.848094] ACPI: (supports S0 S3 S4 S5)
- [ 0.848141] ACPI: Using IOAPIC for interrupt routing
- [ 0.848249] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.851326] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
- [ 0.860454] PCI: Using MMCONFIG at e0000000 - efffffff
- [ 0.872807] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
- [ 0.873225] ACPI: No dock devices found.
- [ 0.873524] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.873693] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfcffc000-0xfcffffff]
- [ 0.873735] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.873742] pci 0000:00:1b.0: PME# disabled
- [ 0.873807] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.873813] pci 0000:00:1c.0: PME# disabled
- [ 0.873879] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.873885] pci 0000:00:1c.1: PME# disabled
- [ 0.873952] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.873958] pci 0000:00:1c.3: PME# disabled
- [ 0.874009] pci 0000:00:1d.0: reg 20 io port: [0xbc00-0xbc1f]
- [ 0.874062] pci 0000:00:1d.1: reg 20 io port: [0xb880-0xb89f]
- [ 0.874115] pci 0000:00:1d.2: reg 20 io port: [0xb800-0xb81f]
- [ 0.874173] pci 0000:00:1d.3: reg 20 io port: [0xb480-0xb49f]
- [ 0.874232] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfcffbc00-0xfcffbfff]
- [ 0.874281] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.874288] pci 0000:00:1d.7: PME# disabled
- [ 0.874411] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
- [ 0.874463] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
- [ 0.874472] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
- [ 0.874480] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
- [ 0.874488] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
- [ 0.874496] pci 0000:00:1f.2: reg 20 io port: [0xff90-0xff9f]
- [ 0.874505] pci 0000:00:1f.2: reg 24 32bit mmio: [0x00fc00-0x00ffff]
- [ 0.874527] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.874533] pci 0000:00:1f.2: PME# disabled
- [ 0.874582] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
- [ 0.874657] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
- [ 0.874673] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
- [ 0.874689] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xce000000-0xcfffffff]
- [ 0.874699] pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f]
- [ 0.874710] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe980000-0xfe9fffff]
- [ 0.874802] pci 0000:01:00.1: reg 10 32bit mmio: [0xfe97c000-0xfe97ffff]
- [ 0.880102] pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
- [ 0.880109] pci 0000:00:1c.0: bridge 32bit mmio: [0xfd000000-0xfe9fffff]
- [ 0.880118] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xce000000-0xdfffffff]
- [ 0.880180] pci 0000:02:00.0: reg 10 32bit mmio: [0xfeaffc00-0xfeaffcff]
- [ 0.880317] pci 0000:02:00.2: reg 10 32bit mmio: [0xfeaff800-0xfeaff8ff]
- [ 0.880449] pci 0000:02:00.3: reg 10 32bit mmio: [0xfeaff400-0xfeaff4ff]
- [ 0.880583] pci 0000:02:00.5: reg 10 32bit mmio: [0xfeaf4000-0xfeaf7fff]
- [ 0.880602] pci 0000:02:00.5: reg 18 io port: [0xdc00-0xdc7f]
- [ 0.880613] pci 0000:02:00.5: reg 1c io port: [0xd800-0xd8ff]
- [ 0.880673] pci 0000:02:00.5: PME# supported from D0 D3hot D3cold
- [ 0.880681] pci 0000:02:00.5: PME# disabled
- [ 0.888106] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff]
- [ 0.888113] pci 0000:00:1c.1: bridge 32bit mmio: [0xfea00000-0xfeafffff]
- [ 0.888178] pci 0000:03:00.0: reg 10 io port: [0xe800-0xe8ff]
- [ 0.888203] pci 0000:03:00.0: reg 18 64bit mmio: [0xfebfc000-0xfebfffff]
- [ 0.888262] pci 0000:03:00.0: supports D1 D2
- [ 0.888267] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.888274] pci 0000:03:00.0: PME# disabled
- [ 0.896087] pci 0000:00:1c.3: bridge io port: [0xe000-0xefff]
- [ 0.896094] pci 0000:00:1c.3: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
- [ 0.896146] pci 0000:00:1e.0: transparent bridge
- [ 0.896180] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.896388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.896525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
- [ 0.896633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
- [ 0.896772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
- [ 0.913971] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
- [ 0.914184] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
- [ 0.914387] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 10 11 12 14 15)
- [ 0.914588] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
- [ 0.914789] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
- [ 0.914992] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
- [ 0.915194] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
- [ 0.915398] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10 11 12 14 15)
- [ 0.915649] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.915660] vgaarb: loaded
- [ 0.915714] PCI: Using ACPI for IRQ routing
- [ 0.915714] pci 0000:00:1f.2: BAR 5: address space collision on of device [0x00fc00-0x00ffff]
- [ 0.916009] pci 0000:00:1f.2: BAR 5: can't allocate resource
- [ 0.916238] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.916246] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.916256] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- [ 0.924032] Switching to clocksource tsc
- [ 0.926233] pnp: PnP ACPI init
- [ 0.926266] ACPI: bus type pnp registered
- [ 0.930393] pnp: PnP ACPI: found 15 devices
- [ 0.930399] ACPI: ACPI bus type pnp unregistered
- [ 0.930422] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
- [ 0.930429] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
- [ 0.930447] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.930453] system 00:08: ioport range 0x800-0x87f has been reserved
- [ 0.930460] system 00:08: ioport range 0x480-0x4bf has been reserved
- [ 0.930466] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
- [ 0.930473] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
- [ 0.930486] system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
- [ 0.930497] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.930504] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.930520] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
- [ 0.930533] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
- [ 0.930539] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
- [ 0.930546] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
- [ 0.930552] system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
- [ 0.930559] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved
- [ 0.935710] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
- [ 0.935718] pci 0000:00:1c.0: IO window: 0xc000-0xcfff
- [ 0.935725] pci 0000:00:1c.0: MEM window: 0xfd000000-0xfe9fffff
- [ 0.935735] pci 0000:00:1c.0: PREFETCH window: 0x000000ce000000-0x000000dfffffff
- [ 0.935746] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
- [ 0.935751] pci 0000:00:1c.1: IO window: 0xd000-0xdfff
- [ 0.935759] pci 0000:00:1c.1: MEM window: 0xfea00000-0xfeafffff
- [ 0.935765] pci 0000:00:1c.1: PREFETCH window: 0x00000080000000-0x000000801fffff
- [ 0.935783] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
- [ 0.935788] pci 0000:00:1c.3: IO window: 0xe000-0xefff
- [ 0.935795] pci 0000:00:1c.3: MEM window: 0xfeb00000-0xfebfffff
- [ 0.935802] pci 0000:00:1c.3: PREFETCH window: 0x00000080200000-0x000000803fffff
- [ 0.935811] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
- [ 0.935815] pci 0000:00:1e.0: IO window: disabled
- [ 0.935821] pci 0000:00:1e.0: MEM window: disabled
- [ 0.935827] pci 0000:00:1e.0: PREFETCH window: disabled
- [ 0.935848] alloc irq_desc for 16 on node -1
- [ 0.935853] alloc kstat_irqs on node -1
- [ 0.935874] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.935881] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.935894] alloc irq_desc for 17 on node -1
- [ 0.935898] alloc kstat_irqs on node -1
- [ 0.935906] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.935913] pci 0000:00:1c.1: setting latency timer to 64
- [ 0.935988] pci 0000:00:1c.3: power state changed by ACPI to D0
- [ 0.936043] pci 0000:00:1c.3: power state changed by ACPI to D0
- [ 0.936052] alloc irq_desc for 19 on node -1
- [ 0.936056] alloc kstat_irqs on node -1
- [ 0.936065] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
- [ 0.936072] pci 0000:00:1c.3: setting latency timer to 64
- [ 0.936082] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.936090] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.936095] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
- [ 0.936101] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
- [ 0.936107] pci_bus 0000:01: resource 1 mem: [0xfd000000-0xfe9fffff]
- [ 0.936112] pci_bus 0000:01: resource 2 pref mem [0xce000000-0xdfffffff]
- [ 0.936118] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
- [ 0.936124] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff]
- [ 0.936129] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff]
- [ 0.936135] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
- [ 0.936140] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]
- [ 0.936146] pci_bus 0000:03: resource 2 pref mem [0x80200000-0x803fffff]
- [ 0.936152] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
- [ 0.936157] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
- [ 0.936225] NET: Registered protocol family 2
- [ 0.936491] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.938241] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- [ 0.941009] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.941641] TCP: Hash tables configured (established 262144 bind 65536)
- [ 0.941647] TCP reno registered
- [ 0.941884] NET: Registered protocol family 1
- [ 0.942042] pci 0000:01:00.0: Boot video device
- [ 0.942165] Unpacking initramfs...
- [ 1.358323] Freeing initrd memory: 9040k freed
- [ 1.365472] audit: initializing netlink socket (disabled)
- [ 1.365493] type=2000 audit(1326236127.365:1): initialized
- [ 1.370990] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 1.374253] VFS: Disk quotas dquot_6.5.2
- [ 1.374380] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.374546] msgmni has been set to 4023
- [ 1.375080] alg: No test for stdrng (krng)
- [ 1.375211] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 1.375218] io scheduler noop registered
- [ 1.375222] io scheduler anticipatory registered
- [ 1.375225] io scheduler deadline registered
- [ 1.375316] io scheduler cfq registered (default)
- [ 1.375510] alloc irq_desc for 24 on node -1
- [ 1.375515] alloc kstat_irqs on node -1
- [ 1.375534] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
- [ 1.375545] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 1.375715] alloc irq_desc for 25 on node -1
- [ 1.375720] alloc kstat_irqs on node -1
- [ 1.375732] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
- [ 1.375742] pcieport 0000:00:1c.1: setting latency timer to 64
- [ 1.375898] alloc irq_desc for 26 on node -1
- [ 1.375903] alloc kstat_irqs on node -1
- [ 1.375914] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
- [ 1.375924] pcieport 0000:00:1c.3: setting latency timer to 64
- [ 1.379597] Linux agpgart interface v0.103
- [ 1.379714] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 1.380445] input: Macintosh mouse button emulation as /devices/virtual/input/input0
- [ 1.381005] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
- [ 1.383363] i8042.c: Detected active multiplexing controller, rev 1.0.
- [ 1.384178] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.384205] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 1.384214] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 1.384223] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 1.384232] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 1.384505] mice: PS/2 mouse device common for all mice
- [ 1.384606] rtc_cmos 00:03: RTC can wake from S4
- [ 1.384698] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 1.384733] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 1.384761] cpuidle: using governor ladder
- [ 1.384766] cpuidle: using governor menu
- [ 1.384775] No iBFT detected.
- [ 1.385465] TCP cubic registered
- [ 1.385761] NET: Registered protocol family 10
- [ 1.386190] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
- [ 1.387594] Mobile IPv6
- [ 1.387601] NET: Registered protocol family 17
- [ 1.387821] PM: Resume from disk failed.
- [ 1.387842] registered taskstats version 1
- [ 1.388404] rtc_cmos 00:03: setting system clock to 2012-01-10 22:55:28 UTC (1326236128)
- [ 1.388504] Initalizing network drop monitor service
- [ 1.388575] Freeing unused kernel memory: 592k freed
- [ 1.388822] Write protecting the kernel read-only data: 4236k
- [ 1.422085] udev[76]: starting version 164
- [ 1.555715] jme: JMicron JMC2XX ethernet driver version 1.0.5
- [ 1.555802] jme 0000:02:00.5: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 1.555825] jme 0000:02:00.5: setting latency timer to 64
- [ 1.558173] eth0: JMC250 Gigabit Ethernet ver:23 rev:3 macaddr:80:ee:73:1f:ef:df
- [ 1.565722] sdhci: Secure Digital Host Controller Interface driver
- [ 1.565729] sdhci: Copyright(c) Pierre Ossman
- [ 1.594453] usbcore: registered new interface driver usbfs
- [ 1.594525] usbcore: registered new interface driver hub
- [ 1.594697] usbcore: registered new device driver usb
- [ 1.608727] thermal LNXTHERM:01: registered as thermal_zone0
- [ 1.608748] ACPI: Thermal Zone [TZ00] (48 C)
- [ 1.632737] SCSI subsystem initialized
- [ 1.680277] libata version 3.00 loaded.
- [ 1.682215] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2382] (rev 80)
- [ 1.682271] alloc irq_desc for 18 on node -1
- [ 1.682278] alloc kstat_irqs on node -1
- [ 1.682301] sdhci-pci 0000:02:00.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18
- [ 1.682374] sdhci-pci 0000:02:00.0: setting latency timer to 64
- [ 1.682512] Registered led device: mmc0::
- [ 1.682626] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA
- [ 1.682658] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2381] (rev 80)
- [ 1.682688] sdhci-pci 0000:02:00.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
- [ 1.682705] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
- [ 1.682718] sdhci-pci 0000:02:00.2: PCI INT B disabled
- [ 1.688277] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.688349] alloc irq_desc for 23 on node -1
- [ 1.688355] alloc kstat_irqs on node -1
- [ 1.688372] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 1.688414] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 1.688421] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 1.688473] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- [ 1.688558] ehci_hcd 0000:00:1d.7: using broken periodic workaround
- [ 1.688573] ehci_hcd 0000:00:1d.7: debug port 1
- [ 1.692470] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 1.692554] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfcffbc00
- [ 1.694195] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.708526] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 1.708578] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.708584] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.708589] usb usb1: Product: EHCI Host Controller
- [ 1.708593] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
- [ 1.708598] usb usb1: SerialNumber: 0000:00:1d.7
- [ 1.708759] usb usb1: configuration #1 chosen from 1 choice
- [ 1.708893] hub 1-0:1.0: USB hub found
- [ 1.708914] hub 1-0:1.0: 8 ports detected
- [ 1.709688] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 1.709710] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 1.709719] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 1.709754] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 1.709805] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00
- [ 1.709922] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.709930] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.709937] usb usb2: Product: UHCI Host Controller
- [ 1.709942] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
- [ 1.709946] usb usb2: SerialNumber: 0000:00:1d.0
- [ 1.710121] usb usb2: configuration #1 chosen from 1 choice
- [ 1.710237] hub 2-0:1.0: USB hub found
- [ 1.710259] hub 2-0:1.0: 2 ports detected
- [ 1.710420] ata_piix 0000:00:1f.2: version 2.13
- [ 1.710448] ata_piix 0000:00:1f.2: enabling device (0005 -> 0007)
- [ 1.710464] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.710476] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- [ 1.710565] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 1.710755] scsi0 : ata_piix
- [ 1.711060] scsi1 : ata_piix
- [ 1.714497] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
- [ 1.714505] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
- [ 1.714618] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.714643] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 1.714653] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 1.714702] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- [ 1.714783] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880
- [ 1.714901] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.714908] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.714915] usb usb3: Product: UHCI Host Controller
- [ 1.714921] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
- [ 1.714927] usb usb3: SerialNumber: 0000:00:1d.1
- [ 1.715108] usb usb3: configuration #1 chosen from 1 choice
- [ 1.715180] hub 3-0:1.0: USB hub found
- [ 1.715195] hub 3-0:1.0: 2 ports detected
- [ 1.715312] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 1.715325] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 1.715331] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 1.715349] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- [ 1.715384] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
- [ 1.715459] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.715465] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.715470] usb usb4: Product: UHCI Host Controller
- [ 1.715474] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
- [ 1.715479] usb usb4: SerialNumber: 0000:00:1d.2
- [ 1.715609] usb usb4: configuration #1 chosen from 1 choice
- [ 1.715680] hub 4-0:1.0: USB hub found
- [ 1.715695] hub 4-0:1.0: 2 ports detected
- [ 1.715785] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
- [ 1.715796] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 1.715802] uhci_hcd 0000:00:1d.3: UHCI Host Controller
- [ 1.715819] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
- [ 1.715869] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b480
- [ 1.715943] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.715949] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.715954] usb usb5: Product: UHCI Host Controller
- [ 1.715958] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
- [ 1.715962] usb usb5: SerialNumber: 0000:00:1d.3
- [ 1.716095] usb usb5: configuration #1 chosen from 1 choice
- [ 1.716162] hub 5-0:1.0: USB hub found
- [ 1.716176] hub 5-0:1.0: 2 ports detected
- [ 1.880487] ata1.00: ATA-8: ADATA SSD S599 40GB, 3.4.3, max UDMA/133
- [ 1.880495] ata1.00: 78161328 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.913750] ata1.00: configured for UDMA/133
- [ 1.914005] scsi 0:0:0:0: Direct-Access ATA ADATA SSD S599 4 3.4. PQ: 0 ANSI: 5
- [ 1.930750] sd 0:0:0:0: [sda] 78161328 512-byte logical blocks: (40.0 GB/37.2 GiB)
- [ 1.930913] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.930921] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.930990] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.931398] sda: sda1 sda2 < sda5 sda6 >
- [ 1.932827] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 2.150211] PM: Starting manual resume from disk
- [ 2.150218] PM: Resume from partition 8:5
- [ 2.150221] PM: Checking hibernation image.
- [ 2.150426] PM: Error -22 checking image file
- [ 2.150430] PM: Resume from disk failed.
- [ 2.200916] EXT4-fs (sda1): mounted filesystem with ordered data mode
- [ 2.204546] usb 5-2: new low speed USB device using uhci_hcd and address 2
- [ 2.390981] usb 5-2: New USB device found, idVendor=05af, idProduct=0522
- [ 2.390988] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
- [ 2.390994] usb 5-2: Product: 2.4G USB RF KeyBoard
- [ 2.391184] usb 5-2: configuration #1 chosen from 1 choice
- [ 2.433853] udev[361]: starting version 164
- [ 2.524749] processor LNXCPU:00: registered as cooling_device0
- [ 2.525567] processor LNXCPU:01: registered as cooling_device1
- [ 2.526349] processor LNXCPU:02: registered as cooling_device2
- [ 2.527130] processor LNXCPU:03: registered as cooling_device3
- [ 2.531433] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
- [ 2.531452] ACPI: Sleep Button [SLPB]
- [ 2.531940] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
- [ 2.531957] ACPI: Power Button [PWRB]
- [ 2.532240] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
- [ 2.532256] ACPI: Power Button [PWRF]
- [ 2.554044] ACPI: WMI: Mapper loaded
- [ 2.665363] usbcore: registered new interface driver hiddev
- [ 2.682800] input: 2.4G USB RF KeyBoard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input5
- [ 2.686105] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 2.686809] generic-usb 0003:05AF:0522.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G USB RF KeyBoard] on usb-0000:00:1d.3-2/input0
- [ 2.688748] input: PC Speaker as /devices/platform/pcspkr/input/input6
- [ 2.693875] jmb38x_ms 0000:02:00.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
- [ 2.693890] jmb38x_ms 0000:02:00.3: setting latency timer to 64
- [ 2.722075] input: 2.4G USB RF KeyBoard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input7
- [ 2.722639] generic-usb 0003:05AF:0522.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [2.4G USB RF KeyBoard] on usb-0000:00:1d.3-2/input1
- [ 2.722745] usbcore: registered new interface driver usbhid
- [ 2.722902] usbhid: v2.6:USB HID core driver
- [ 2.774597] [drm] Initialized drm 1.1.0 20060810
- [ 2.778791] Error: Driver 'pcspkr' is already registered, aborting...
- [ 2.823012] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 2.823100] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 2.870172] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 2.870183] nouveau 0000:01:00.0: setting latency timer to 64
- [ 2.874824] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8780b1)
- [ 2.876004] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
- [ 2.910745] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
- [ 2.924675] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
- [ 2.924920] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
- [ 2.996517] [drm] nouveau 0000:01:00.0: ... appears to be valid
- [ 2.996528] [drm] nouveau 0000:01:00.0: BIT BIOS found
- [ 2.996534] [drm] nouveau 0000:01:00.0: Bios version 70.18.64.00
- [ 2.996538] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
- [ 2.996622] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
- [ 2.996629] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
- [ 2.996635] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
- [ 2.996641] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
- [ 2.996647] [drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07
- [ 2.996653] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02011300 00000000
- [ 2.996660] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02022362 00020010
- [ 2.996665] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 0000000e 00000000
- [ 2.996680] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x70B3
- [ 3.060516] [drm] nouveau 0000:01:00.0: 0x7388: Condition still not met after 20ms, skipping following opcodes
- [ 3.088517] [drm] nouveau 0000:01:00.0: 0x738C: Condition still not met after 20ms, skipping following opcodes
- [ 3.112019] [drm] nouveau 0000:01:00.0: 0x7539: Condition still not met after 20ms, skipping following opcodes
- [ 3.112032] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x7566
- [ 3.144016] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x8139
- [ 3.144033] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x8152
- [ 3.193584] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x8239
- [ 3.193592] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x829E
- [ 3.216018] [drm] nouveau 0000:01:00.0: 0x6F27: Condition still not met after 20ms, skipping following opcodes
- [ 3.216035] [drm] nouveau 0000:01:00.0: Couldn't find matching output script table
- [ 3.216116] [drm] nouveau 0000:01:00.0: 0x5B04: parsing output script 0
- [ 3.402456] [TTM] Zone kernel: Available graphics memory: 1030400 kiB.
- [ 3.402477] [drm] nouveau 0000:01:00.0: 512 MiB VRAM
- [ 3.500625] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
- [ 3.503059] [drm] nouveau 0000:01:00.0: Detected a DAC output
- [ 3.503068] [drm] nouveau 0000:01:00.0: Detected a TMDS output
- [ 3.503076] [drm] nouveau 0000:01:00.0: Detected a VGA connector
- [ 3.503176] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
- [ 3.756913] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x401a0000, bo ffff88007d067400
- [ 3.765744] [drm] nouveau 0000:01:00.0: Couldn't find matching output script table
- [ 3.765778] [drm] nouveau 0000:01:00.0: Couldn't find matching output script table
- [ 3.765807] [drm] nouveau 0000:01:00.0: Couldn't find matching output script table
- [ 3.766128] [drm] nouveau 0000:01:00.0: Couldn't find matching output script table
- [ 3.793487] Console: switching to colour frame buffer device 160x64
- [ 3.822991] fb0: nouveaufb frame buffer device
- [ 3.822995] registered panic notifier
- [ 3.823019] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
- [ 3.823113] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 3.823127] hda_intel: Disable MSI for Nvidia chipset
- [ 3.823229] HDA Intel 0000:01:00.1: setting latency timer to 64
- [ 4.993953] Adding 1952760k swap on /dev/sda5. Priority:-1 extents:1 across:1952760k SS
- [ 5.076283] loop: module loaded
- [ 5.228037] EXT4-fs (sda6): mounted filesystem with ordered data mode
- [ 26.728021] usb 1-6: new high speed USB device using ehci_hcd and address 3
- [ 26.860921] usb 1-6: New USB device found, idVendor=08ec, idProduct=0020
- [ 26.860928] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 26.860934] usb 1-6: Product: disk2go PURE S2
- [ 26.860938] usb 1-6: Manufacturer: disk2go
- [ 26.860942] usb 1-6: SerialNumber: 04A14B60307188E3
- [ 26.861156] usb 1-6: configuration #1 chosen from 1 choice
- [ 26.880679] Initializing USB Mass Storage driver...
- [ 26.880994] scsi2 : SCSI emulation for USB Mass Storage devices
- [ 26.881327] usb-storage: device found at 3
- [ 26.881332] usb-storage: waiting for device to settle before scanning
- [ 26.881364] usbcore: registered new interface driver usb-storage
- [ 26.881375] USB Mass Storage support registered.
- [ 31.880166] usb-storage: device scan complete
- [ 31.880662] scsi 2:0:0:0: Direct-Access disk2go disk2go PURE S2 6.50 PQ: 0 ANSI: 0 CCS
- [ 31.882796] sd 2:0:0:0: [sdb] 1901567 512-byte logical blocks: (973 MB/928 MiB)
- [ 31.883404] sd 2:0:0:0: [sdb] Write Protect is off
- [ 31.883411] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
- [ 31.883416] sd 2:0:0:0: [sdb] Assuming drive cache: write through
- [ 31.885498] sd 2:0:0:0: [sdb] Assuming drive cache: write through
- [ 31.885722] sdb: sdb1
- [ 31.889146] sd 2:0:0:0: [sdb] Assuming drive cache: write through
- [ 31.889387] sd 2:0:0:0: [sdb] Attached SCSI removable disk
- [ 58.014730] kjournald starting. Commit interval 5 seconds
- [ 58.019663] EXT3 FS on sdb1, internal journal
- [ 58.019674] EXT3-fs: mounted filesystem with ordered data mode.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement