Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-26lenny1) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Nov 25 01:53:57 UTC 2010
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
- [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf7e0000 (usable)
- [ 0.000000] BIOS-e820: 00000000cf7e0000 - 00000000cf7e3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000cf7e3000 - 00000000cf7f0000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000cf7f0000 - 00000000cf800000 (reserved)
- [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000128000000 (usable)
- [ 0.000000] Warning only 4GB will be used.
- [ 0.000000] Use a HIGHMEM64G enabled kernel.
- [ 0.000000] 3200MB HIGHMEM available.
- [ 0.000000] 896MB LOWMEM available.
- [ 0.000000] found SMP MP-table at [c00f5490] 000f5490
- [ 0.000000] Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0 -> 4096
- [ 0.000000] Normal 4096 -> 229376
- [ 0.000000] HighMem 229376 -> 1048576
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[1] active PFN ranges
- [ 0.000000] 0: 0 -> 1048576
- [ 0.000000] On node 0 totalpages: 1048576
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1760 pages used for memmap
- [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 6400 pages used for memmap
- [ 0.000000] HighMem zone: 812800 pages, LIFO batch:31
- [ 0.000000] Movable zone: 0 pages used for memmap
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] ACPI: RSDP 000F6E50, 0014 (r0 GBT )
- [ 0.000000] ACPI: RSDT CF7E3040, 0040 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
- [ 0.000000] ACPI: FACP CF7E30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
- [ 0.000000] ACPI: DSDT CF7E3180, 4335 (r1 GBT GBTUACPI 1000 MSFT 100000C)
- [ 0.000000] ACPI: FACS CF7E0000, 0040
- [ 0.000000] ACPI: HPET CF7E7600, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98)
- [ 0.000000] ACPI: MCFG CF7E7680, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
- [ 0.000000] ACPI: EUDS CF7E76C0, 04D0 (r1 GBT 0 0)
- [ 0.000000] ACPI: TAMG CF7E7B90, 0482 (r1 GBT GBT B0 5455312E BG 45240101)
- [ 0.000000] ACPI: APIC CF7E7500, 00BC (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
- [ 0.000000] ACPI: SSDT CF7E8040, 1BF8 (r1 INTEL PPM RCM 80000001 INTL 20061109)
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] Allocating PCI resources starting at d0000000 (gap: cf800000:24800000)
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
- [ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data
- [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 8
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
- [ 0.000000] Kernel command line: root=/dev/sda3 ro quiet
- [ 0.000000] mapped APIC to ffffb000 (fee00000)
- [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
- [ 0.000000] Detected 3066.684 MHz processor.
- [ 0.004000] Console: colour VGA+ 80x25
- [ 0.004000] console [tty0] enabled
- [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.004000] Memory: 3354008k/4194304k available (1771k kernel code, 44236k reserved, 749k data, 244k init, 2482048k highmem)
- [ 0.004000] virtual kernel memory layout:
- [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
- [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
- [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
- [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
- [ 0.004000] .data : 0xc02baf25 - 0xc0376620 ( 749 kB)
- [ 0.004000] .text : 0xc0100000 - 0xc02baf25 (1771 kB)
- [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
- [ 0.004000] hpet clockevent registered
- [ 0.083782] Calibrating delay using timer specific routine.. 6137.84 BogoMIPS (lpj=12275694)
- [ 0.083798] Security Framework initialized
- [ 0.083801] SELinux: Disabled at boot.
- [ 0.083802] Capability LSM initialized
- [ 0.083810] Mount-cache hash table entries: 512
- [ 0.083883] Initializing cgroup subsys ns
- [ 0.083885] Initializing cgroup subsys cpuacct
- [ 0.083887] Initializing cgroup subsys devices
- [ 0.083898] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.083899] CPU: L2 cache: 256K
- [ 0.083900] CPU: L3 cache: 4096K
- [ 0.083902] CPU: Unsupported number of the siblings 16<6>Intel machine check architecture supported.
- [ 0.083907] Intel machine check reporting enabled on CPU#0.
- [ 0.083909] using mwait in idle threads.
- [ 0.083913] Checking 'hlt' instruction... OK.
- [ 0.100006] ACPI: Core revision 20080321
- [ 0.104006] ENABLING IO-APIC IRQs
- [ 0.104006] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.143610] CPU0: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz stepping 05
- [ 0.144009] Booting processor 1/4 ip 6000
- [ 0.152009] Initializing CPU#1
- [ 0.152009] Calibrating delay using timer specific routine.. 6133.13 BogoMIPS (lpj=12266273)
- [ 0.152009] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.152009] CPU: L2 cache: 256K
- [ 0.152009] CPU: L3 cache: 4096K
- [ 0.152009] CPU: Unsupported number of the siblings 16<6>Intel machine check architecture supported.
- [ 0.152009] Intel machine check reporting enabled on CPU#1.
- [ 0.232014] CPU1: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz stepping 05
- [ 0.232014] checking TSC synchronization [CPU#0 -> CPU#1]:
- [ 0.232014] Measured 70 cycles TSC warp between CPUs, turning off TSC clock.
- [ 0.232014] Marking TSC unstable due to: check_tsc_sync_source failed.
- [ 0.232083] Booting processor 2/1 ip 6000
- [ 0.244015] Initializing CPU#2
- [ 0.244015] Calibrating delay using timer specific routine.. 6133.11 BogoMIPS (lpj=12266236)
- [ 0.244015] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.244015] CPU: L2 cache: 256K
- [ 0.244015] CPU: L3 cache: 4096K
- [ 0.244015] CPU: Unsupported number of the siblings 16<6>Intel machine check architecture supported.
- [ 0.244015] Intel machine check reporting enabled on CPU#2.
- [ 0.320494] CPU2: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz stepping 05
- [ 0.320578] Booting processor 3/5 ip 6000
- [ 0.332020] Initializing CPU#3
- [ 0.332020] Calibrating delay using timer specific routine.. 6133.13 BogoMIPS (lpj=12266266)
- [ 0.332020] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.332020] CPU: L2 cache: 256K
- [ 0.332020] CPU: L3 cache: 4096K
- [ 0.332020] CPU: Unsupported number of the siblings 16<6>Intel machine check architecture supported.
- [ 0.332020] Intel machine check reporting enabled on CPU#3.
- [ 0.408570] CPU3: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz stepping 05
- [ 0.408593] Brought up 4 CPUs
- [ 0.408594] Total of 4 processors activated (24537.23 BogoMIPS).
- [ 0.408609] CPU0 attaching sched-domain:
- [ 0.408610] domain 0: span 0-3
- [ 0.408612] groups: 0 1 2 3
- [ 0.408615] CPU1 attaching sched-domain:
- [ 0.408616] domain 0: span 0-3
- [ 0.408617] groups: 1 2 3 0
- [ 0.408619] CPU2 attaching sched-domain:
- [ 0.408620] domain 0: span 0-3
- [ 0.408621] groups: 2 3 0 1
- [ 0.408623] CPU3 attaching sched-domain:
- [ 0.408623] domain 0: span 0-3
- [ 0.408624] groups: 3 0 1 2
- [ 0.412025] net_namespace: 660 bytes
- [ 0.412025] Booting paravirtualized kernel on bare hardware
- [ 0.412025] NET: Registered protocol family 16
- [ 0.412025] ACPI: bus type pci registered
- [ 0.412025] PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63
- [ 0.412025] PCI: MCFG area at f4000000 reserved in E820
- [ 0.412025] PCI: Using MMCONFIG for extended config space
- [ 0.412025] PCI: Using configuration type 1 for base access
- [ 0.412025] Setting up standard PCI resources
- [ 0.412025] ACPI: EC: Look up EC in DSDT
- [ 0.415464] ACPI: Interpreter enabled
- [ 0.415466] ACPI: (supports S0 S3 S4 S5)
- [ 0.415473] ACPI: Using IOAPIC for interrupt routing
- [ 0.420026] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.420026] PCI: Transparent bridge - 0000:00:1e.0
- [ 0.420026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.420026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
- [ 0.420026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
- [ 0.420026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
- [ 0.432027] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
- [ 0.432027] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
- [ 0.432027] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
- [ 0.432027] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
- [ 0.432027] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
- [ 0.432027] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
- [ 0.432027] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
- [ 0.432027] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
- [ 0.432027] Linux Plug and Play Support v0.97 (c) Adam Belay
- [ 0.432027] pnp: PnP ACPI init
- [ 0.432027] ACPI: bus type pnp registered
- [ 0.432027] pnp: PnP ACPI: found 13 devices
- [ 0.432027] ACPI: ACPI bus type pnp unregistered
- [ 0.432027] PnPBIOS: Disabled by ACPI PNP
- [ 0.432027] PCI: Using ACPI for IRQ routing
- [ 0.440499] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.440508] hpet0: 8 64-bit timers, 14318180 Hz
- [ 0.441529] ACPI: RTC can wake from S4
- [ 0.444484] Switched to high resolution mode on CPU 0
- [ 0.444741] Switched to high resolution mode on CPU 1
- [ 0.445448] Switched to high resolution mode on CPU 2
- [ 0.445611] Switched to high resolution mode on CPU 3
- [ 0.448458] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.448462] system 00:01: ioport range 0x290-0x29f has been reserved
- [ 0.448466] system 00:01: ioport range 0x800-0x87f has been reserved
- [ 0.448469] system 00:01: ioport range 0x290-0x294 has been reserved
- [ 0.448473] system 00:01: ioport range 0x880-0x88f has been reserved
- [ 0.448485] system 00:09: ioport range 0x400-0x47f has been reserved
- [ 0.448489] system 00:09: ioport range 0x580-0x5ff has been reserved
- [ 0.448497] system 00:0a: iomem range 0xf4000000-0xf7ffffff could not be reserved
- [ 0.448505] system 00:0b: iomem range 0xcde00-0xcffff has been reserved
- [ 0.448509] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
- [ 0.448513] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
- [ 0.448517] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
- [ 0.448521] system 00:0b: iomem range 0xcf7e0000-0xcf7effff could not be reserved
- [ 0.448525] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
- [ 0.448528] system 00:0b: iomem range 0x100000-0xcf7dffff could not be reserved
- [ 0.448532] system 00:0b: iomem range 0xcf7f0000-0xcf7fffff could not be reserved
- [ 0.448537] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.448544] system 00:0b: iomem range 0xfed10000-0xfed1dfff could not be reserved
- [ 0.448545] system 00:0b: iomem range 0xfed20000-0xfed8ffff could not be reserved
- [ 0.448547] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
- [ 0.448548] system 00:0b: iomem range 0xffb00000-0xffb7ffff could not be reserved
- [ 0.448550] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
- [ 0.448551] system 00:0b: iomem range 0xe0000-0xeffff has been reserved
- [ 0.480002] PCI: Bridge: 0000:00:01.0
- [ 0.480002] IO window: d000-dfff
- [ 0.480002] MEM window: 0xf9000000-0xfaffffff
- [ 0.480002] PREFETCH window: 0x00000000d0000000-0x00000000efffffff
- [ 0.480002] PCI: Bridge: 0000:00:1c.0
- [ 0.480002] IO window: disabled.
- [ 0.480002] MEM window: disabled.
- [ 0.480002] PREFETCH window: disabled.
- [ 0.480002] PCI: Bridge: 0000:00:1c.5
- [ 0.480002] IO window: b000-bfff
- [ 0.480002] MEM window: disabled.
- [ 0.480002] PREFETCH window: 0x00000000fbe00000-0x00000000fbefffff
- [ 0.480002] PCI: Bridge: 0000:00:1e.0
- [ 0.480002] IO window: c000-cfff
- [ 0.480002] MEM window: disabled.
- [ 0.480002] PREFETCH window: disabled.
- [ 0.480002] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
- [ 0.480002] PCI: Setting latency timer of device 0000:00:01.0 to 64
- [ 0.480002] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
- [ 0.480002] PCI: Setting latency timer of device 0000:00:1c.0 to 64
- [ 0.480002] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
- [ 0.480002] PCI: Setting latency timer of device 0000:00:1c.5 to 64
- [ 0.480002] PCI: Setting latency timer of device 0000:00:1e.0 to 64
- [ 0.480002] NET: Registered protocol family 2
- [ 0.496003] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.496003] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.496003] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.496003] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.496003] TCP reno registered
- [ 0.504003] NET: Registered protocol family 1
- [ 0.504003] checking if image is initramfs... it is
- [ 0.860180] Freeing initrd memory: 7036k freed
- [ 0.860180] audit: initializing netlink socket (disabled)
- [ 0.860180] type=2000 audit(1291644112.856:1): initialized
- [ 0.860180] highmem bounce pool size: 64 pages
- [ 0.860180] Total HugeTLB memory allocated, 0
- [ 0.860180] VFS: Disk quotas dquot_6.5.1
- [ 0.860180] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.860180] msgmni has been set to 1718
- [ 0.860180] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.860180] io scheduler noop registered
- [ 0.860180] io scheduler anticipatory registered
- [ 0.860180] io scheduler deadline registered
- [ 0.860180] io scheduler cfq registered (default)
- [ 1.079630] pci 0000:01:00.0: Boot video device
- [ 1.083579] PCI: Setting latency timer of device 0000:00:01.0 to 64
- [ 1.083579] assign_interrupt_mode Found MSI capability
- [ 1.083579] Allocate Port Service[0000:00:01.0:pcie00]
- [ 1.083579] Allocate Port Service[0000:00:01.0:pcie03]
- [ 1.083579] PCI: Setting latency timer of device 0000:00:1c.0 to 64
- [ 1.083579] assign_interrupt_mode Found MSI capability
- [ 1.083579] Allocate Port Service[0000:00:1c.0:pcie00]
- [ 1.083579] Allocate Port Service[0000:00:1c.0:pcie02]
- [ 1.083579] PCI: Setting latency timer of device 0000:00:1c.5 to 64
- [ 1.083579] assign_interrupt_mode Found MSI capability
- [ 1.083579] Allocate Port Service[0000:00:1c.5:pcie00]
- [ 1.083579] Allocate Port Service[0000:00:1c.5:pcie02]
- [ 1.083579] isapnp: Scanning for PnP cards...
- [ 1.437824] isapnp: No Plug & Play device found
- [ 1.438609] hpet_resources: 0xfed00000 is busy
- [ 1.438609] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
- [ 1.438679] brd: module loaded
- [ 1.438679] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 1.438679] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.438679] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 1.438679] mice: PS/2 mouse device common for all mice
- [ 1.438679] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- [ 1.438679] rtc0: alarms up to one month
- [ 1.438679] cpuidle: using governor ladder
- [ 1.438679] cpuidle: using governor menu
- [ 1.438679] No iBFT detected.
- [ 1.438679] TCP cubic registered
- [ 1.438679] NET: Registered protocol family 17
- [ 1.438679] Using IPI No-Shortcut mode
- [ 1.438679] registered taskstats version 1
- [ 1.438679] rtc_cmos 00:04: setting system clock to 2010-12-06 14:01:53 UTC (1291644113)
- [ 1.438679] Freeing unused kernel memory: 244k freed
- [ 1.667593] input: AT Translated Set 2 keyboard as /class/input/input0
- [ 1.702784] Monitor-Mwait will be used to enter C-1 state
- [ 1.702786] Monitor-Mwait will be used to enter C-2 state
- [ 1.702788] Monitor-Mwait will be used to enter C-3 state
- [ 1.706610] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
- [ 1.706610] ACPI: ACPI0007:00 is registered as cooling_device0
- [ 1.706610] ACPI: Processor [CPU0] (supports 8 throttling states)
- [ 1.706610] ------------[ cut here ]------------
- [ 1.706610] WARNING: at arch/x86/kernel/hpet.c:299 hpet_legacy_next_event+0x38/0x5a()
- [ 1.706610] Modules linked in: processor(+) fan thermal_sys
- [ 1.706610] Pid: 0, comm: swapper Not tainted 2.6.26-2-686 #1
- [ 1.706610] [<c012264f>] warn_on_slowpath+0x40/0x66
- [ 1.706610] [<c015ae4f>] get_page_from_freelist+0xc1/0x3e9
- [ 1.706610] [<c0118966>] enqueue_task+0x52/0x5d
- [ 1.706610] [<c011898c>] activate_task+0x1b/0x26
- [ 1.706610] [<c011b733>] try_to_wake_up+0xe8/0xf1
- [ 1.706610] [<c0131a51>] autoremove_wake_function+0xd/0x2d
- [ 1.706610] [<c01361c0>] getnstimeofday+0x37/0xbc
- [ 1.706610] [<c010fd8d>] lapic_next_event+0xc/0x10
- [ 1.706610] [<c01388e8>] clockevents_program_event+0xc4/0xd2
- [ 1.706610] [<c01395ea>] tick_dev_program_event+0x1e/0x82
- [ 1.706610] [<c01140e3>] hpet_legacy_next_event+0x38/0x5a
- [ 1.706610] [<c01388e8>] clockevents_program_event+0xc4/0xd2
- [ 1.706610] [<c01395ea>] tick_dev_program_event+0x1e/0x82
- [ 1.706610] [<c0139070>] tick_broadcast_set_event+0xf/0x11
- [ 1.706610] [<c01392fa>] tick_broadcast_oneshot_control+0x8a/0xda
- [ 1.706610] [<c0138d46>] tick_notify+0x1cf/0x2e5
- [ 1.706610] [<c0133e1d>] hrtimer_reprogram+0x83/0x9b
- [ 1.706610] [<c013502c>] notifier_call_chain+0x2a/0x47
- [ 1.706610] [<c0135070>] raw_notifier_call_chain+0x9/0xc
- [ 1.706610] [<c01387e8>] clockevents_notify+0x19/0x55
- [ 1.706610] [<f883818e>] acpi_idle_enter_simple+0x89/0x203 [processor]
- [ 1.706610] [<f8837eb1>] acpi_idle_enter_bm+0xc3/0x317 [processor]
- [ 1.706610] [<c024a2cd>] cpuidle_idle_call+0x5b/0x86
- [ 1.706610] [<c024a272>] cpuidle_idle_call+0x0/0x86
- [ 1.706610] [<c01025d3>] cpu_idle+0xb0/0xd0
- [ 1.706610] =======================
- [ 1.706610] ---[ end trace a2a32fefbcda7365 ]---
- [ 1.706610] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
- [ 1.706610] ACPI: ACPI0007:01 is registered as cooling_device1
- [ 1.706610] ACPI: Processor [CPU1] (supports 8 throttling states)
- [ 1.707558] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
- [ 1.707558] ACPI: ACPI0007:02 is registered as cooling_device2
- [ 1.707558] ACPI: Processor [CPU2] (supports 8 throttling states)
- [ 1.710053] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
- [ 1.710053] ACPI: ACPI0007:03 is registered as cooling_device3
- [ 1.710053] ACPI: Processor [CPU3] (supports 8 throttling states)
- [ 1.789822] usbcore: registered new interface driver usbfs
- [ 1.789822] usbcore: registered new interface driver hub
- [ 1.789822] usbcore: registered new device driver usb
- [ 1.790215] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
- [ 1.790215] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
- [ 1.790215] PCI: Setting latency timer of device 0000:03:00.0 to 64
- [ 1.790215] r8169 0000:03:00.0: unknown MAC, using family default
- [ 1.790215] eth0: RTL8168b/8111b at 0xf881e000, 1c:6f:65:42:7b:c8, XID 2c200000 IRQ 220
- [ 1.793822] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
- [ 1.793822] PCI: Setting latency timer of device 0000:00:1a.7 to 64
- [ 1.793822] ehci_hcd 0000:00:1a.7: EHCI Host Controller
- [ 1.793822] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 1.797237] ehci_hcd 0000:00:1a.7: debug port 2
- [ 1.797241] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
- [ 1.797248] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbffe000
- [ 1.801657] USB Universal Host Controller Interface driver v3.0
- [ 1.813152] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- [ 1.813208] usb usb1: configuration #1 chosen from 1 choice
- [ 1.813231] hub 1-0:1.0: USB hub found
- [ 1.813236] hub 1-0:1.0: 6 ports detected
- [ 1.861013] No dock devices found.
- [ 1.881211] SCSI subsystem initialized
- [ 1.895115] libata version 3.00 loaded.
- [ 1.922844] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.922849] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.922853] usb usb1: Product: EHCI Host Controller
- [ 1.922857] usb usb1: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
- [ 1.922858] usb usb1: SerialNumber: 0000:00:1a.7
- [ 1.931315] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
- [ 1.931315] PCI: Setting latency timer of device 0000:00:1a.0 to 64
- [ 1.931315] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 1.931315] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
- [ 1.931315] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
- [ 1.931315] usb usb2: configuration #1 chosen from 1 choice
- [ 1.931315] hub 2-0:1.0: USB hub found
- [ 1.931315] hub 2-0:1.0: 2 ports detected
- [ 2.034158] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.034158] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.034158] usb usb2: Product: UHCI Host Controller
- [ 2.034158] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
- [ 2.034158] usb usb2: SerialNumber: 0000:00:1a.0
- [ 2.034343] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
- [ 2.034343] PCI: Setting latency timer of device 0000:00:1a.1 to 64
- [ 2.034343] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 2.034343] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
- [ 2.034343] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
- [ 2.034343] usb usb3: configuration #1 chosen from 1 choice
- [ 2.034343] hub 3-0:1.0: USB hub found
- [ 2.034343] hub 3-0:1.0: 2 ports detected
- [ 2.137414] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.137414] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.137414] usb usb3: Product: UHCI Host Controller
- [ 2.137414] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
- [ 2.137414] usb usb3: SerialNumber: 0000:00:1a.1
- [ 2.137414] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
- [ 2.137414] PCI: Setting latency timer of device 0000:00:1a.2 to 64
- [ 2.137414] uhci_hcd 0000:00:1a.2: UHCI Host Controller
- [ 2.137414] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
- [ 2.137414] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
- [ 2.137414] usb usb4: configuration #1 chosen from 1 choice
- [ 2.137414] hub 4-0:1.0: USB hub found
- [ 2.137414] hub 4-0:1.0: 2 ports detected
- [ 2.240435] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.240435] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.240435] usb usb4: Product: UHCI Host Controller
- [ 2.240435] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
- [ 2.240435] usb usb4: SerialNumber: 0000:00:1a.2
- [ 2.303367] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
- [ 2.303367] PCI: Setting latency timer of device 0000:00:1d.7 to 64
- [ 2.303367] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 2.303367] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
- [ 2.303367] ehci_hcd 0000:00:1d.7: debug port 2
- [ 2.303367] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
- [ 2.303367] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffd000
- [ 2.314932] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- [ 2.314932] usb usb5: configuration #1 chosen from 1 choice
- [ 2.314932] hub 5-0:1.0: USB hub found
- [ 2.314932] hub 5-0:1.0: 6 ports detected
- [ 2.422371] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.422371] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.422371] usb usb5: Product: EHCI Host Controller
- [ 2.422371] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
- [ 2.422371] usb usb5: SerialNumber: 0000:00:1d.7
- [ 2.422903] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
- [ 2.422903] PCI: Setting latency timer of device 0000:00:1d.0 to 64
- [ 2.422903] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 2.422903] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
- [ 2.422903] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
- [ 2.422903] usb usb6: configuration #1 chosen from 1 choice
- [ 2.422903] hub 6-0:1.0: USB hub found
- [ 2.422903] hub 6-0:1.0: 2 ports detected
- [ 2.525901] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.525901] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.525901] usb usb6: Product: UHCI Host Controller
- [ 2.525901] usb usb6: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
- [ 2.525901] usb usb6: SerialNumber: 0000:00:1d.0
- [ 2.526239] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
- [ 2.526239] PCI: Setting latency timer of device 0000:00:1d.1 to 64
- [ 2.526239] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 2.526239] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
- [ 2.526239] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
- [ 2.526239] usb usb7: configuration #1 chosen from 1 choice
- [ 2.526239] hub 7-0:1.0: USB hub found
- [ 2.526239] hub 7-0:1.0: 2 ports detected
- [ 2.629333] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.629333] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.629333] usb usb7: Product: UHCI Host Controller
- [ 2.629333] usb usb7: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
- [ 2.629333] usb usb7: SerialNumber: 0000:00:1d.1
- [ 2.629737] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
- [ 2.629737] PCI: Setting latency timer of device 0000:00:1d.2 to 64
- [ 2.629737] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 2.629737] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
- [ 2.629737] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
- [ 2.629737] usb usb8: configuration #1 chosen from 1 choice
- [ 2.629737] hub 8-0:1.0: USB hub found
- [ 2.629737] hub 8-0:1.0: 2 ports detected
- [ 2.746511] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.746516] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.746519] usb usb8: Product: UHCI Host Controller
- [ 2.746522] usb usb8: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
- [ 2.746524] usb usb8: SerialNumber: 0000:00:1d.2
- [ 2.771950] ata_piix 0000:00:1f.2: version 2.12
- [ 2.771950] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
- [ 2.771950] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- [ 2.771950] PCI: Setting latency timer of device 0000:00:1f.2 to 64
- [ 2.771960] scsi0 : ata_piix
- [ 2.771960] scsi1 : ata_piix
- [ 2.771960] ata1: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19
- [ 2.771960] ata2: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19
- [ 3.243120] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3.254748] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
- [ 3.254748] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 3.270138] ata1.00: configured for UDMA/133
- [ 3.602332] ata2: SATA link down (SStatus 0 SControl 300)
- [ 3.602332] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
- [ 3.602332] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
- [ 3.602332] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
- [ 3.602332] PCI: Setting latency timer of device 0000:00:1f.5 to 64
- [ 3.602337] scsi2 : ata_piix
- [ 3.602337] scsi3 : ata_piix
- [ 3.602337] ata3: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 19
- [ 3.602337] ata4: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 19
- [ 3.919397] ata3: SATA link down (SStatus 0 SControl 300)
- [ 4.398754] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 4.406538] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
- [ 4.422894] ata4.00: configured for UDMA/100
- [ 4.430932] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5
- [ 4.439959] Uniform Multi-Platform E-IDE driver
- [ 4.439959] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
- [ 4.458728] Driver 'sd' needs updating - please use bus_type methods
- [ 4.458728] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
- [ 4.458728] sd 0:0:0:0: [sda] Write Protect is off
- [ 4.458728] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 4.458728] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.458728] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
- [ 4.458728] sd 0:0:0:0: [sda] Write Protect is off
- [ 4.458728] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 4.458728] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.458728] sda:<4>Driver 'sr' needs updating - please use bus_type methods
- [ 4.475085] sda1 sda2 sda3
- [ 4.503085] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 4.528438] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 4.528438] Uniform CD-ROM driver Revision: 3.20
- [ 4.528438] sr 3:0:0:0: Attached scsi CD-ROM sr0
- [ 4.529445] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 4.529445] sr 3:0:0:0: Attached scsi generic sg1 type 5
- [ 4.771513] PM: Starting manual resume from disk
- [ 4.839298] kjournald starting. Commit interval 5 seconds
- [ 4.839298] EXT3-fs: mounted filesystem with ordered data mode.
- [ 6.259443] udevd version 125 started
- [ 6.668025] input: Power Button (FF) as /class/input/input1
- [ 6.721430] ACPI: Power Button (FF) [PWRF]
- [ 6.721476] input: Power Button (CM) as /class/input/input2
- [ 6.786744] ACPI: Power Button (CM) [PWRB]
- [ 6.990733] input: PC Speaker as /class/input/input3
- [ 7.202391] Error: Driver 'pcspkr' is already registered, aborting...
- [ 7.234191] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 18 (level, low) -> IRQ 18
- [ 7.234191] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
- [ 7.598938] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
- [ 8.278131] Adding 4000176k swap on /dev/sda2. Priority:-1 extents:1 across:4000176k
- [ 8.768482] EXT3 FS on sda3, internal journal
- [ 9.014964] loop: module loaded
- [ 10.395465] r8169: eth0: link up
- [ 10.395465] r8169: eth0: link up
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement