Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # Acer Revo M1-601 B dmesg
- Copyright (c) 1992-2014 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 10.1-RELEASE-p25 #0 c39b63e(releng/10.1)-dirty: Mon Dec 21 15:20:13 CST 2015
- root@pfs22-amd64-builder:/usr/obj.RELENG_2_2.amd64/usr/pfSensesrc/src.RELENG_2_2/sys/pfSense_SMP.10 amd64
- FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
- CPU: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz (1600.05-MHz K8-class CPU)
- Origin = "GenuineIntel" Id = 0x406c3 Family = 0x6 Model = 0x4c Stepping = 3
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
- AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
- AMD Features2=0x101<LAHF,Prefetch>
- Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS>
- VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
- TSC: P-state invariant, performance statistics
- real memory = 2147483648 (2048 MB)
- avail memory = 1958141952 (1867 MB)
- Event timer "LAPIC" quality 600
- ACPI APIC Table: <ACRSYS ACRPRDCT>
- FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
- FreeBSD/SMP: 1 package(s) x 2 core(s)
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 4
- ioapic0 <Version 2.0> irqs 0-114 on motherboard
- lapic0: Forcing LINT1 to edge trigger
- iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
- iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
- module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806345e0, 0) error 1
- iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
- iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
- module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80634690, 0) error 1
- iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
- iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
- module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80634740, 0) error 1
- wlan: mac acl policy registered
- ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
- ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
- module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8060ce10, 0) error 1
- ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
- ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
- module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8060cec0, 0) error 1
- ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
- ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
- module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8060cf70, 0) error 1
- random: <Software, Yarrow> initialized
- kbd1 at kbdmux0
- cryptosoft0: <software crypto> on motherboard
- padlock0: No ACE support.
- acpi0: <ACRSYS ACRPRDCT> on motherboard
- acpi0: Power Button (fixed)
- unknown: I/O range not supported
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
- atrtc0: Warning: Couldn't map I/O.
- Event timer "RTC" frequency 32768 Hz quality 0
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 450
- Event timer "HPET1" frequency 14318180 Hz quality 440
- Event timer "HPET2" frequency 14318180 Hz quality 440
- Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- vgapci0: <VGA-compatible display> port 0x2000-0x203f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff irq 16 at device 2.0 on pci0
- vgapci0: Boot video device
- sdhci_pci0: <Generic SD HCI> mem 0x91617000-0x91617fff irq 16 at device 16.0 on pci0
- sdhci_pci0: 1 slot(s) allocated
- mmc0: <MMC/SD bus> on sdhci_pci0
- xhci0: <XHCI (generic) USB 3.0 controller> mem 0x91600000-0x9160ffff irq 20 at device 20.0 on pci0
- usbus0: waiting for BIOS to give up control
- xhci0: 32 byte context size.
- usbus0 on xhci0
- pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
- hdac0: <Intel (0x2284) HDA Controller> mem 0x91610000-0x91613fff irq 22 at device 27.0 on pci0
- pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
- pci2: <ACPI PCI bus> on pcib2
- pci2: <unknown> at device 0.0 (no driver attached)
- pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
- pci3: <ACPI PCI bus> on pcib3
- pci3: <network> at device 0.0 (no driver attached)
- pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
- pci4: <ACPI PCI bus> on pcib4
- re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0x91100000-0x91100fff,0x91000000-0x91003fff irq 19 at device 0.0 on pci4
- re0: Using 1 MSI-X message
- re0: turning off MSI enable bit.
- re0: ASPM disabled
- re0: Chip rev. 0x4c000000
- re0: MAC rev. 0x00000000
- miibus0: <MII bus> on re0
- rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
- rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
- re0: Ethernet address: 7c:d3:0a:0d:12:10
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- acpi_button0: <Power Button> on acpi0
- acpi_tz0: <Thermal Zone> on acpi0
- ACPI Error: [TCNT] Namespace lookup failure, AE_NOT_FOUND (20130823/psargs-393)
- ACPI Error: Method parse/execution failed [\134_TZ_.THRM._PSL] (Node 0xfffff8000341a680), AE_NOT_FOUND (20130823/psparse-553)
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- ppc0: cannot reserve I/O port range
- uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
- est0: <Enhanced SpeedStep Frequency Control> on cpu0
- p4tcc0: <CPU Frequency Thermal Control> on cpu0
- est1: <Enhanced SpeedStep Frequency Control> on cpu1
- p4tcc1: <CPU Frequency Thermal Control> on cpu1
- Timecounters tick every 1.000 msec
- IPsec: Initialized Security Association Processing.
- random: unblocking device.
- usbus0: 5.0Gbps Super Speed USB v3.0
- acpi_tz0: _TMP value is absurd, ignored (-273.2C)
- ugen0.1: <0x8086> at usbus0
- uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
- ACPI Error: [TCNT] Namespace lookup failure, AE_NOT_FOUND (20130823/psargs-393)
- ACPI Error: Method parse/execution failed [\134_TZ_.THRM._PSL] (Node 0xfffff8000341a680), AE_NOT_FOUND (20130823/psparse-553)
- uhub0: 13 ports with 13 removable, self powered
- ugen0.2: <Dell> at usbus0
- ukbd0: <Dell Dell USB Entry Keyboard, class 0/0, rev 1.10/1.15, addr 1> on usbus0
- kbd2 at ukbd0
- ACPI Error: [TCNT] Namespace lookup failure, AE_NOT_FOUND (20130823/psargs-393)
- ACPI Error: Method parse/execution failed [\134_TZ_.THRM._PSL] (Node 0xfffff8000341a680), AE_NOT_FOUND (20130823/psparse-553)
- ACPI Error: [TCNT] Namespace lookup failure, AE_NOT_FOUND (20130823/psargs-393)
- ACPI Error: Method parse/execution failed [\134_TZ_.THRM._PSL] (Node 0xfffff8000341a680), AE_NOT_FOUND (20130823/psparse-553)
- ACPI Error: [TCNT] Namespace lookup failure, AE_NOT_FOUND (20130823/psargs-393)
- ACPI Error: Method parse/execution failed [\134_TZ_.THRM._PSL] (Node 0xfffff8000341a680), AE_NOT_FOUND (20130823/psparse-553)
- ACPI Error: [TCNT] Namespace lookup failure, AE_NOT_FOUND (20130823/psargs-393)
- ACPI Error: Method parse/execution failed [\134_TZ_.THRM._PSL] (Node 0xfffff8000341a680), AE_NOT_FOUND (20130823/psparse-553)
- ugen0.3: <Unknown> at usbus0 (disconnected)
- ugen0.3: <JMicron> at usbus0
- umass0: <MSC Bulk-Only Transfer> on usbus0
- da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
- da0: <Hitachi HDP725025GLA380 0102> Fixed Direct Access SCSI-6 device
- da0: Serial Number DB4564576867976
- da0: 400.000MB/s transfers
- da0: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
- da0: quirks=0x2<NO_6_BYTE>
- ACPI Error: [TCNT] Namespace lookup failure, AE_NOT_FOUND (20130823/psargs-393)
- ACPI Error: Method parse/execution failed [\134_TZ_.THRM._PSL] (Node 0xfffff8000341a680), AE_NOT_FOUND (20130823/psparse-553)
- ACPI Error: [TCNT] Namespace lookup failure, AE_NOT_FOUND (20130823/psargs-393)
- ACPI Error: Method parse/execution failed [\134_TZ_.THRM._PSL] (Node 0xfffff8000341a680), AE_NOT_FOUND (20130823/psparse-553)
- ACPI Error: [TCNT] Namespace lookup failure, AE_NOT_FOUND (20130823/psargs-393)
- ACPI Error: Method parse/execution failed [\134_TZ_.THRM._PSL] (Node 0xfffff8000341a680), AE_NOT_FOUND (20130823/psparse-553)
- mmc0: No compatible cards found on bus
- hdacc0: <Realtek (0x0235) HDA CODEC> at cad 0 on hdac0
- hdaa0: <Realtek (0x0235) Audio Function Group> at nid 1 on hdacc0
- pcm0: <Realtek (0x0235) (Front Analog Headphones)> at nid 33 on hdaa0
- hdacc1: <Intel (0x2883) HDA CODEC> at cad 2 on hdac0
- hdaa1: <Intel (0x2883) Audio Function Group> at nid 1 on hdacc1
- pcm1: <Intel (0x2883) (HDMI/DP 8ch)> at nid 5 on hdaa1
- pcm2: <Intel (0x2883) (HDMI/DP 8ch)> at nid 7 on hdaa1
- lapic4: Forcing LINT1 to edge trigger
- SMP: AP CPU #1 Launched!
- Timecounter "TSC" frequency 1600054680 Hz quality 1000
- Trying to mount root from ufs:/dev/ufsid/56b28737e788130d [rw]...
- ACPI Error: [TCNT] Namespace lookup failure, AE_NOT_FOUND (20130823/psargs-393)
- ACPI Error: Method parse/execution failed [\134_TZ_.THRM._PSL] (Node 0xfffff8000341a680), AE_NOT_FOUND (20130823/psparse-553)
Advertisement
Add Comment
Please, Sign In to add comment