Uloader Pendrive test

dev/mload v5.1 (c) 2009-2010, Hermes
$IOSVersion: SDI: 07/14/08 19:25:38 64M $
$IOSVersion:  SO: 06/28/07 02:37:15 64M Release/apricot-win/HEAD $
$IOSVersion:  KD: 11/15/07 10:20:31 64M Release/apricot-win/SDK_FW_30_4_13_branch $
$IOSVersion:  WD: 08/04/08 01:49:08 64M Release/apricot-win/HEAD $
$IOSVersion: NCD: 06/28/07 02:37:17 64M Release/apricot-win/HEAD $
$IOSVersion: ETH: 08/09/07 18:09:02 64M Release/apricot-win/SDK_FW_30_4_13_branch $
$IOSVersion: STM: 07/27/09 10:06:00 64M Release/builder/HEAD $
$IOSVersion: WL: 08/04/08 01:49:17 64M Ver.4.30.47.2/Release $
$IOSVersion: OH1: 06/08/07 18:17:21 64M $
Set IPC access rights: salt=ffff0000, n=0
$IOSVersion: SSL: 02/27/08 19:26:09 64M Release/builder/HEAD $
$IOSVersion: KBD: 08/13/08 15:43:01 64M $
OH1:configured USB device at port 0, vid: 0x057e pid: 0x0305
OH0: configured USB device (hub 0, port 0) vid: 0x090c pid: 0x6200

***************************************************
Rodries ehcmodule 1.0
USBStorage_Init()
***************************************************

OH0: deleted USB device (hub 0, port 0)
getting USB_REQ_GETDESCRIPTOR
USB_REQ_GETDESCRIPTOR ok
trying USB_REQ_SETADDRESS: 0
USB_REQ_SETADDRESS ok: 0
init ok
USBStorage_Open(): USB_GetDescriptors 0
USBStorage_Open(): ucd 0 Power 500 mA
USBStorage_Open(): interface subclass 6 ata_prot 1
In Point: 512
Out Point: 512
ep_in 0x81 ep_out 0x2
USBStorage_Open(): conf: 0x1 altInterface: 0
Actual conf: 0   next conf: 0x1
USB_SetConfiguration() & USB_SetAlternativeInterface() OK
Get_Max_Lun(): OK: 1
USBStorage_Open(): OK, return 0
USBStorage_MountLUN 0#
    start_stop cmd ret 0
    SCSI_TEST_UNIT_READY ret 0
    SCSI_REQUEST_SENSE ret 0
    SCSI_REQUEST_SENSE status 0x6
    Inquiry ret 0
    Device Type: 0
    ReadCapacity ret 0  sector_size: 512  sectors: 7745535
USBStorage_MountLUN: ret 0
USBStorage_Init() Ok
Reading sector 0
ehci_int_working_callback_part1, timeout: 1000000
interrupt_callback_hand STS_INT
urb retval: 0
ehci_int_working_callback_part1, timeout: 10000000
interrupt_callback_hand STS_INT
urb retval: 0
ehci_int_working_callback_part1, timeout: 1000000
interrupt_callback_hand STS_INT
urb retval: 0
OK Reading sector 0
first read sector (0) OK
Unplug: reset 0 status 0x1005
__read_csw -1
    SCSI_TEST_UNIT_READY ret -1
fast_remount KO ret 0
Unplug: reset 0 status 0x1803
Unplug: reset 0 status 0x1005
fast_remount KO ret 0
Unplug: reset 0 status 0x1005
fast_remount KO ret 0
Unplug: reset 0 status 0x1002
Unplug: reset 0 status 0x1803
Unplug: reset 0 status 0x1002
Unplug: reset 0 status 0x1005
fast_remount KO ret 0
Unplug: reset 0 status 0x1005
fast_remount KO ret 0
Unplug: reset 0 status 0x1005
    SCSI_TEST_UNIT_READY ret 0
    SCSI_REQUEST_SENSE ret 0
    SCSI_REQUEST_SENSE status 0x6
Unplug: reset 0 status 0x1005
    SCSI_TEST_UNIT_READY ret 0