Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- BusyBox v1.21.1 (Ubuntu 1:1.21.0-1ubuntu1) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- # dmesg
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.0.101-UbuntuTouch-Sensation-g886cfa4 (build@utouch) (gcc version 4.7.4 20131207 (prerelease) (Linaro GCC 4.7-2013.12) ) #1 SMP PREEMPT Sat Jan 25 15:18:28 EST 2014
- [ 0.000000] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c53c7d
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
- [ 0.000000] Machine: pyramid
- [ 0.000000] [K] find the engineer tag
- [ 0.000000] [K] parse_tag_engineerid: hwid = 0x7
- [ 0.000000] [K] find the skuid tag
- [ 0.000000] [K] parse_tag_skuid: hwid = 0x28006
- [ 0.000000] [K] tag_panel_parsing: panel type = 9699361
- [ 0.000000] [K] find the engineer tag
- [ 0.000000] [K] parse_tag_engineerid: hwid = 0x7
- [ 0.000000] [K] tag_ps_parsing: PS type = 0x2
- [ 0.000000] CAM_AWB_CAL Data size = 1026 , 0x59504550, size = 4096
- [ 0.000000] Ignoring unrecognised tag 0x41387898
- [ 0.000000] BT Data size= 4, 0x43294329,
- [ 0.000000] 1c,
- [ 0.000000] b0,
- [ 0.000000] 94,
- [ 0.000000] 27,
- [ 0.000000] 96,
- [ 0.000000] 7c,
- [ 0.000000] 00,
- [ 0.000000] 00,
- [ 0.000000] [K] parse_tag_ps_calibration: ps_kparam1 = 0x50531522, ps_kparam2 = 0x30e1517
- [ 0.000000] [K] parse_tag_gs_calibration: gs_kvalue = 0x0
- [ 0.000000] [K] find the memsize tag
- [ 0.000000] [K] parse_tag_memsize: 0
- [ 0.000000] Ignoring unrecognised tag 0x5441001f
- [ 0.000000] [K] gyro_gs data
- [ 0.000000] [K] [0]:0x67
- [ 0.000000] [K] [1]:0x0
- [ 0.000000] [K] [2]:0x0
- [ 0.000000] [K] [3]:0x0
- [ 0.000000] [K] [4]:0x24
- [ 0.000000] [K] [5]:0x0
- [ 0.000000] [K] [6]:0x5
- [ 0.000000] [K] [7]:0xd0
- [ 0.000000] [K] [8]:0x73
- [ 0.000000] [K] [9]:0xff
- [ 0.000000] [K] [10]:0xfc
- [ 0.000000] [K] [11]:0xad
- [ 0.000000] [K] [12]:0xe6
- [ 0.000000] [K] [13]:0xff
- [ 0.000000] [K] [14]:0xff
- [ 0.000000] [K] [15]:0x31
- [ 0.000000] [K] [16]:0xcc
- [ 0.000000] [K] [17]:0x0
- [ 0.000000] [K] [18]:0x1
- [ 0.000000] [K] [19]:0x21
- [ 0.000000] [K] [20]:0xda
- [ 0.000000] [K] [21]:0xff
- [ 0.000000] [K] [22]:0xff
- [ 0.000000] [K] [23]:0xfe
- [ 0.000000] [K] [24]:0x44
- [ 0.000000] [K] [25]:0xff
- [ 0.000000] [K] [26]:0xff
- [ 0.000000] [K] [27]:0xfe
- [ 0.000000] [K] [28]:0x2c
- [ 0.000000] [K] [29]:0x0
- [ 0.000000] [K] [30]:0x0
- [ 0.000000] [K] [31]:0x5
- [ 0.000000] [K] [32]:0xac
- [ 0.000000] [K] [33]:0x48
- [ 0.000000] [K] [34]:0x7b
- [ 0.000000] [K] [35]:0x18
- [ 0.000000] [K] [36]:0x26
- [ 0.000000] size_pmem_device: allocating 25165824 bytes at 0xe6800000 (0x6e800000 physical) for pmem_adsp
- [ 0.000000] size_pmem_device: allocating 52428800 bytes at 0xb0e00000 (0x38e00000 physical) for pmem_smipool
- [ 0.000000] size_pmem_device: allocating 2330624 bytes at 0xbe400000 (0x46400000 physical) for pmem_audio
- [ 0.000000] memory pool 0 (start 38000000 size e00000) initialized
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] On node 0 totalpages: 139520
- [ 0.000000] free_area_init_node: node 0, pgdat c0a92be0, node_mem_map c124f000
- [ 0.000000] Normal zone: 512 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 65024 pages, LIFO batch:15
- [ 0.000000] HighMem zone: 578 pages used for memmap
- [ 0.000000] HighMem zone: 73406 pages, LIFO batch:15
- [ 0.000000] allocating 10416128 bytes at c169b000 (4969b000 physical) for fb
- [ 0.000000] PERCPU: Embedded 6 pages/cpu @c208d000 s8480 r0 d16096 u32768
- [ 0.000000] pcpu-alloc: s8480 r0 d16096 u32768 alloc=8*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 138430
- [ 0.000000] Kernel command line: poweron_status=1 board_pyramid.disable_uart3=0 diag.enabled=0 board_pyramid.debug_uart=0 userdata_sel=0 androidboot.emmc=true androidboot.pagesize=2048 androidboot.lb=0 androidboot.baseband=11.24A.3504.31_M androidboot.cid=HTC__E11 androidboot.batt_poweron=good_battery androidboot.carrier=HTC-Dutch androidboot.mid=PG5813001 androidboot.keycaps=qwerty androidboot.dq=FAIL androidboot.mode=normal androidboot.serialno=HT21LV809951 androidboot.bootloader=1.27.1100 zygote_oneshot=off msm_watchdog.enable=1 console=ttyHSL0 androidboot.hardware=pyramid no_console_suspend=1
- [ 0.000000] [K] board_bootloader_setup: 1.27.1100
- [ 0.000000] [K] board_bootloader_setup: MFG BUILD
- [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Memory: 545MB = 545MB total
- [ 0.000000] Memory: 528516k/528516k available, 29564k reserved, 295936K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
- [ 0.000000] vmalloc : 0xd0800000 - 0xfe000000 ( 728 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .init : 0xc0008000 - 0xc003c000 ( 208 kB)
- [ 0.000000] .text : 0xc0100000 - 0xc09328c0 (8395 kB)
- [ 0.000000] .data : 0xc0a00000 - 0xc0a93aa0 ( 591 kB)
- [ 0.000000] .bss : 0xc0a93ae0 - 0xc0c0fef0 (1522 kB)
- [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Verbose stalled-CPUs detection is disabled.
- [ 0.000000] NR_IRQS:871
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.150146] Calibrating delay using timer specific routine.. 13.52 BogoMIPS (lpj=67640)
- [ 0.150177] pid_max: default: 32768 minimum: 301
- [ 0.150451] Security Framework initialized
- [ 0.150482] SELinux: Initializing.
- [ 0.150512] SELinux: Starting in permissive mode
- [ 0.150665] Mount-cache hash table entries: 512
- [ 0.151702] Initializing cgroup subsys cpuacct
- [ 0.151794] Initializing cgroup subsys freezer
- [ 0.151855] CPU: Testing write buffer coherency: ok
- [ 0.236846] CPU1: Booted secondary processor
- [ 0.246551] Brought up 2 CPUs
- [ 0.246582] SMP: Total of 2 processors activated (27.05 BogoMIPS).
- [ 0.247283] devtmpfs: initialized
- [ 0.259460] print_constraints: dummy:
- [ 0.259765] NET: Registered protocol family 16
- [ 0.259918] [K] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- [ 0.261138] msm_tsens_early_init: done
- [ 0.261138] msm_rpm_init: RPM firmware 2.0.167772250
- [ 0.261199] MPM_SLEEP_TICK: 6579ms
- [ 0.261474] [SMD] smem_find(137, 72): wrong size 64
- [ 0.261474] socinfo_init: v5, id=70, ver=2.0, raw_id=1057, raw_ver=1057, hw_plat=0, hw_plat_ver=65536
- [ 0.261505] accessory_chip=0
- [ 0.261718] saw_probe: id=0, name=8901_s0
- [ 0.261932] saw_probe: id=1, name=8901_s1
- [ 0.262878] rcg_clk_handoff: gsbi12_uart_clk rate=7372800
- [ 0.262908] rcg_clk_handoff: sdc1_clk rate=48000000
- [ 0.262969] rcg_clk_handoff: dsi_byte_clk rate=1
- [ 0.263031] rcg_clk_handoff: mdp_clk rate=200000000
- [ 0.263214] BD_ADDRESS=1c:b0:94:27:96:7c
- [ 0.264587] Max ACPU freq: 1836000 KHz
- [ 0.287719] CPU0: 29 scaling frequencies supported.
- [ 0.287750] CPU1: 29 scaling frequencies supported.
- [ 0.287872] pyramid: pyramid_init_mmc
- [ 0.287933] [HS_BOARD] (msm8x60_init) system_rev = 128, LE = 1
- [ 0.287933] [HS_BOARD] (msm8x60_init) Set MEMS config
- [ 0.288269] [K] ram_console: got buffer at 40300000, size e0000
- [ 0.288330] [K] ram_console: found existing buffer, size 46369, start 46369
- [ 0.421783] console [ram-1] enabled
- [ 0.422424] pm8058_probe: PMIC revision: E3
- [ 0.423370] pm_gpio_probe: OK: base=173, ngpio=40
- [ 0.423553] pm8xxx_mpp_probe: OK: base=213, ngpio=12
- [ 0.430297] pyramid_add_usb_devices rev: 128
- [ 0.430755] [DISP] pyd_init_panel: res=c0a4f6a0, size=2
- [ 0.430999] panel ID= 0x940021
- [ 0.434173] [AUD] board_msm8x60_audio: msm_snddev_init: spkr pamp gpio 229 requestfailed
- [ 0.434295] [AUD] board_pyramid_audio: pyramid_audio_init
- [ 0.435424] Create /proc/emmc OK.
- [ 0.435485] Create /proc/gpio_info OK.
- [ 0.435546] Create /proc/processor_name OK.
- [ 0.435668] Create /proc/dying_processes OK.
- [ 0.435729] Create /proc/ddr_regs OK.
- [ 0.435791] pyramid_init_keypad
- [ 0.436035] pyramid_wifi_init: start
- [ 0.436187] [HS_BOARD] (headset_device_register) Headset device register
- [ 0.436370] pyramid_init revision=128 engineerid=7
- [ 0.437652] pm8901_init()
- [ 0.437774] pm8901_probe: PMIC revision: F4
- [ 0.438598] gsbi_qup_i2c_gpio_config(): adap_id = 0, config_type = 1
- [ 0.438812] gsbi_qup_i2c_gpio_config(): adap_id = 1, config_type = 1
- [ 0.439086] gsbi_qup_i2c_gpio_config(): adap_id = 10, config_type = 1
- [ 0.439300] gsbi_qup_i2c_gpio_config(): adap_id = 4, config_type = 1
- [ 0.439605] gsbi_qup_i2c_gpio_config(): adap_id = 3, config_type = 1
- [ 0.439758] gsbi_qup_i2c_gpio_config(): adap_id = 2, config_type = 1
- [ 0.439971] gsbi_qup_i2c_gpio_config(): adap_id = 11, config_type = 1
- [ 0.440246] gsbi_qup_i2c_gpio_config(): adap_id = 5, config_type = 1
- [ 0.448059] bio: create slab <bio-0> at 0
- [ 0.448455] pm8901_mpp_probe: gpiochip_add(): rc=0
- [ 0.449249] ion: failed to create debug files.
- [ 0.449310] ION heap vmalloc created
- [ 0.449462] ION heap mm created at 6b300000 with size 3500000
- [ 0.449523] ION heap mm_fw created at 6b100000 with size 200000
- [ 0.449645] ION heap sf created at 40400000 with size 29a0000
- [ 0.449707] ION heap wb created at 6a900000 with size 800000
- [ 0.449920] pmic8058_pwm_probe: OK
- [ 0.450103] usbcore: registered new interface driver usbfs
- [ 0.450195] usbcore: registered new interface driver hub
- [ 0.450408] usbcore: registered new device driver usb
- [ 0.450653] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 0.451049] Bluetooth: Core ver 2.16
- [ 0.451110] NET: Registered protocol family 31
- [ 0.451232] Bluetooth: HCI device and connection manager initialized
- [ 0.451293] Bluetooth: HCI socket layer initialized
- [ 0.451416] Bluetooth: L2CAP socket layer initialized
- [ 0.451477] Bluetooth: SCO socket layer initialized
- [ 0.451904] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.452209] Switching to clocksource gp_timer
- [ 0.452972] [TTY_IO] create tty_wq for smd0
- [ 0.458190] [BATT][tps65200] tps65200_probe
- [ 0.458312] [BATT][tps65200] not HV battery.
- [ 0.458465] [BATT][tps65200] init chg_int interrupt.
- [ 0.458526] [BATT][tps65200] To init delay workqueue to kick tps watchdog!
- [ 0.458984] [BATT][tps65200] Set VDPM as 4.76V: regh 0x03=8f
- [ 0.459045] [BATT][tps65200] [TPS65200]: Driver registration done
- [ 0.459472] NET: Registered protocol family 2
- [ 0.459625] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.459960] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
- [ 0.460327] TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
- [ 0.460784] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.460845] TCP reno registered
- [ 0.460937] UDP hash table entries: 128 (order: 0, 4096 bytes)
- [ 0.461029] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
- [ 0.461517] NET: Registered protocol family 1
- [ 0.461761] Unpacking initramfs...
- [ 0.552642] Freeing initrd memory: 2360K
- [ 0.552947] PMU: registered new PMU device of type 0
- [ 0.553131] PMU: registered new PMU device of type 1
- [ 0.553680] simlock_init: register module ok
- [ 0.553802] [K] htcdrm_init(1, swapper): register module ok
- [ 0.553802]
- [ 0.554290] msm_smd_probe(): get msm_smd_debug_mask=0xc
- [ 0.554718] [SMD] smd_channel_probe_worker: allocation table not initialized
- [ 0.559082] msm_dsps driver version 3.01.
- [ 0.559417] [AUD] snddev_icodec: snddev_icodec_probe: support_aic3254 = 1
- [ 0.559509] [AUD] snddev_icodec: snddev_icodec_probe: support_adie = 0
- [ 0.559600] [AUD] snddev_icodec: snddev_icodec_probe: msm_codec_i2s_slave_mode = 1
- [ 0.559692] [AUD] snddev_icodec: snddev_icodec_probe: support_aic3254_use_mclk = 0
- [ 0.560333] [AUD] snddev_ecodec: snddev_ecodec_init:
- [ 0.560607] [AUD] snddev_ecodec: snddev_ecodec_probe:
- [ 0.560668] [AUD] snddev_ecodec: snddev_ecodec_probe:
- [ 0.560821] [AUD] snddev_ecodec: snddev_ecodec_init: done
- [ 0.561065] [AUD] snddev_mi2s: snddev_mi2s_probe: probe done for fmradio_stereo_tx
- [ 0.561187] [AUD] snddev_mi2s: snddev_mi2s_probe: probe done for fmradio_stereo_rx
- [ 0.561340] [AUD] snddev_mi2s: snddev_mi2s_init : done
- [ 0.561523] [AUD] apr: apr_probe
- [ 0.561950] [AUD] audio_acdb: acdb_init
- [ 0.562133] [AUD] q6adm: adm_init
- [ 0.562194] [AUD] q6afe: afe_init:
- [ 0.562591] [AUD] q6voice: voice_init
- [ 0.563446] [HS_MGR] (headset_notifier_register) Register MIC_BIAS notifier
- [ 0.563537] [HS_MGR] (headset_notifier_update) HS_MGR driver is not ready
- [ 0.565948] [BT]-- R OFF --
- [ 0.573303] [HS_MGR] (htc_headset_mgr_probe) ++++++++++++++++++++
- [ 0.573791] input: h2w headset as /devices/virtual/input/input0
- [ 0.574005] [HS_MGR] (hs_notify_driver_ready) HS_MGR ready
- [ 0.574310] [HS_MGR] (htc_headset_mgr_probe) --------------------
- [ 0.574645] [HS_PMIC] (htc_headset_pmic_probe) ++++++++++++++++++++
- [ 0.575042] [HS_MGR] (headset_notifier_register) Register KEY_INT_ENABLE notifier
- [ 0.575103] [HS_MGR] (hs_notify_driver_ready) HS_PMIC ready
- [ 0.575317] [HS_PMIC] (htc_headset_pmic_probe) --------------------
- [ 0.575592] [HS_8X60] (htc_headset_8x60_probe) ++++++++++++++++++++
- [ 0.575714] [HS_MGR] (headset_notifier_register) Register REMOTE_ADC notifier
- [ 0.575836] [HS_MGR] (headset_notifier_register) Register REMOTE_KEYCODE notifier
- [ 0.575897] [HS_MGR] (headset_notifier_register) Register MIC_STATUS notifier
- [ 0.576019] [HS_MGR] (hs_notify_driver_ready) HS_8X60 ready
- [ 0.576202] [HS_GPIO] (htc_headset_gpio_probe) ++++++++++++++++++++
- [ 0.576385] [HS_MGR] (hs_notify_hpin_irq) HPIN IRQ
- [ 0.576538] [HS_MGR] (headset_notifier_register) Register HPIN_GPIO notifier
- [ 0.576629] [HS_MGR] (hs_notify_driver_ready) HS_GPIO ready
- [ 0.576751] [HS_GPIO] (htc_headset_gpio_probe) --------------------
- [ 0.576812] [HS_8X60] (htc_headset_8x60_probe) --------------------
- [ 0.577850] audit: initializing netlink socket (disabled)
- [ 0.577941] type=2000 audit(0.480:1): initialized
- [ 0.578491] highmem bounce pool size: 64 pages
- [ 0.578704] ashmem: initialized
- [ 0.582672] fuse init (API version 7.16)
- [ 0.583038] msgmni has been set to 458
- [ 0.583099] SELinux: Registering netfilter hooks
- [ 0.584197] io scheduler noop registered
- [ 0.584320] io scheduler deadline registered
- [ 0.584381] io scheduler row registered
- [ 0.584503] io scheduler cfq registered
- [ 0.584625] io scheduler sio registered (default)
- [ 0.584686] io scheduler vr registered
- [ 0.584899] msm_fb_probe: phy_Addr = 0x4969b000 virt = 0xc169b000
- [ 0.585327] MDP HW Base phy_Address = 0x5100000 virt = 0xd0e00000
- [ 0.585510] mdp_clk: mdp_clk=200000000
- [ 0.589477] mdp4_fetch_cfg: dmap=47 vg=47
- [ 0.589599] mdp_color_enhancement
- [ 0.589721] mdp_color_enhancement
- [ 0.590148] mipi_dsi base phy_addr = 0x4700000 virt = 0xd0f00000
- [ 0.590209] msm_mmss_cc base = 0xfe014000
- [ 0.590332] mmss_sfpb base phy_addr = 0x5700000 virt = 0xd083c000
- [ 0.590423] [DISP] mipi_dsi_probe: vsync_gpio=28
- [ 0.590820] [DISP] panel: mipi_cmd_novatek_qhd
- [ 0.591217] setting pdata->panel_info.fb_num to 3. type: 9
- [ 0.591552] mdp4_display_intf_sel: 0x8a
- [ 0.591796] [DISP] msm_fb_probe: blt_mode=1 is_3d_pane=0
- [ 0.595153] FrameBuffer[0] 540x960 size=6266880 bytes is registered successfully!
- [ 0.595336] Registered led device: lcd-backlight
- [ 0.595428] [DISP] mipi_dsi_on+, isr=0x00000002
- [ 0.595550] mipi_dsi_ahb_en: ahb=fe014008 93ffffff
- [ 0.596649] [DISP] pyramid_panel_power(1): init=0 system_rev:128
- [ 0.602478] [DISP] mipi_novatek_panel_type_detect: panel_type=PANEL_ID_PYD_SHARP
- [ 0.602600] [DISP] mipi_dsi_enable_irq: IRQ already enabled
- [ 0.604675] [DISP] mipi_dsi_on-
- [ 0.604766] [DISP] mipi_dsi_read_status_reg
- [ 0.604888] [DISP] [MIPI] DSI_DLN0_PHY_ERR: curr=0x00088888, last=0x00000000
- [ 0.604949] [DISP] [MIPI] DSI_FIFO_STATUS: curr=0x11111000, last=0x00000000
- [ 0.605072] msm_fb_detect_panel: not supported 'mipi_cmd_novatek_wvga'
- [ 0.605133] msm_fb_detect_panel: not supported 'mipi_video_himax_720p'
- [ 0.605316] msm_fb_detect_panel: not supported 'mipi_cmd_orise_qhd'
- [ 0.605682] HDMI: probe
- [ 0.606201] HDMI: probe
- [ 0.606292] HDMI: Features <val:0x80004481, HDMI:ON, HDCP:ON>
- [ 0.606445] setting pdata->panel_info.fb_num to 1. type: 7
- [ 0.606811] mdp4_display_intf_sel: 0x8a
- [ 0.608978] FrameBuffer[1] 1920x1080 size=4149248 bytes is registered successfully!
- [ 0.609191] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group cfb8ae08
- [ 0.609313] EXT_COMMON: external_common_state_create: kobject_uevent(KOBJ_ADD)
- [ 0.609375] hdmi_msm hdmi_msm.1: HDMI HPD: ON
- [ 0.609497] HDMI: HDMI Clk: Enable
- [ 0.609588] hdmi_core_power(on): success
- [ 0.609680] hdmi_enable_5v(on): success
- [ 0.609802] HDMI: HDMI Core: Disable
- [ 0.609863] HDMI: hdmi_msm_hpd_on: (clk, 5V, core, IRQ on) <trigger:true>
- [ 0.609985] HDMI: HDMI Core: Enable
- [ 0.610076] HDMI: HDMI Core: Disable
- [ 0.610137] HDMI: HDMI Core: Enable
- [ 0.610229] [DISP] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0
- [ 0.611114]
- [ 0.611114] msm_vidc_enc: Inside vid_enc_init()
- [ 0.611419]
- [ 0.611419] msm_vidc_enc: Inside vid_enc_vcd_init()
- [ 0.612792] mhl_sii9234_all_power(on): success
- [ 0.612976] [DISP] MhlTx: SiiMhlTxInitialize
- [ 0.615203] [DISP] Drv: SiiMhlTxChipInitialize: 9244
- [ 0.615570] [DISP] SiI 9234
- [ 0.615692] [DISP] Drv: WriteInitialRegisterValues
- [ 0.621887] [DISP] Drv: MHL 1.0 Compliant Clock
- [ 0.647888] [DISP] Drv: InitCBusRegs
- [ 0.651550] [DISP] Drv: Switch To D3: pinAllowD3 = 1
- [ 0.704589] input: rcp_events as /devices/virtual/input/input1
- [ 0.704742] [DISP] sii9234_probe: Probe success!
- [ 0.792419] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
- [ 0.882659] msm_serial_hs module loaded
- [ 0.882751] [BT] bcm_bt_lpm_init: E
- [ 0.882965] [BT] bcm_bt_lpm_probe: success
- [ 0.883239] msm_serial_hsl: detected port #0
- [ 0.883361] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
- [ 0.972686] msm_serial_hsl: driver initialized
- [ 0.973907] msm_rotator_probe: rotator_hw_revision=1
- [ 0.980957] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- [ 0.982238] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- [ 0.983398] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- [ 0.986236] loop: module loaded
- [ 0.986480] pmem: Initializing pmem_adsp (user-space) as cached
- [ 0.986785] pmem_setup: allocating PMEM region from hard-coded address.
- [ 0.986907] allocating 25165824 bytes at (null) (6e800000 physical) for pmem_adsp
- [ 0.987060] pmem: Initializing pmem_audio (user-space) as non-cached
- [ 0.987304] pmem_setup: allocating PMEM region from hard-coded address.
- [ 0.987396] allocating 2330624 bytes at (null) (46400000 physical) for pmem_audio
- [ 0.987518] pmem: Initializing pmem_smipool (user-space) as cached
- [ 0.987762] pmem_setup: allocating PMEM region from hard-coded address.
- [ 0.987884] allocating 52428800 bytes at (null) (38e00000 physical) for pmem_smipool
- [ 0.987976] pmem: Reserving virtual address range d2000000 - d5200000 for pmem_smipool
- [ 0.988281] i2c i2c-11: mpu3050: +bma150
- [ 0.988342] i2c i2c-11: Accel irq not needed
- [ 0.988464] i2c i2c-11: mpu3050: +ak8975
- [ 0.988525] i2c i2c-11: Compass irq not needed
- [ 0.988586] i2c i2c-11: mpu3050: No Pressure Present
- [ 0.988861] mldl_cfg:Reset MPU3050
- [ 1.022766] MPL-accODR: 0
- [ 1.022827] MPL-accODR: 25000
- [ 1.022949] MPL-accFSR: 2048
- [ 1.023010] MPL-accFSR: 2048
- [ 1.023468] i2c i2c-11: Installing irq using 383
- [ 1.023590] i2c i2c-11: Module Param interface = mpuirq
- [ 1.024078] i2c-core: driver [mpu3050] using legacy suspend method
- [ 1.024169] i2c-core: driver [mpu3050] using legacy resume method
- [ 1.024261] mpu_init
- [ 1.024993] pm8xxx_upl_probe: OK
- [ 1.025512] TZCOM: tzcom_init(1, swapper): could not allocte in kernel pmem buffers for sb_in
- [ 1.025848] [CABLE] pyramid_usb_dpdn_switch: Set USB path
- [ 1.025970] [DISP] sii9234_change_usb_owner(0)
- [ 1.026031] config_pyramid_usb_id_gpios 63 input none pull
- [ 1.026214] [CABLE] vbus_mpp_gpio: 223
- [ 1.030883] pmic8058_xoadc:The offset for AMUX calibrationwas -454
- [ 1.042877] [CABLE] cable_detect_get_adc: MPP ADC 26854
- [ 1.042968] [CABLE] cable_detect_get_adc: result = 1802
- [ 1.043060] [CABLE] USB_ID ADC = 1802
- [ 1.043121] [CABLE] usb_id_detect_init: id pin 63
- [ 1.043365] fsynccontrol_init misc_register(fsynccontrol)
- [ 1.044464] [SPI] dd->spi_gpios[0]: 36
- [ 1.044525] [SPI] dd->spi_gpios[1]: 34
- [ 1.044586] [SPI] dd->spi_gpios[2]: 33
- [ 1.045074] [AUD] spi_aic3254: spi_aic3254_init
- [ 1.045135] [AUD] spi_aic3254: spi_aic3254_probe
- [ 1.046997] [PPP] ppp_init disable ppp debug msg
- [ 1.047058] PPP generic driver version 2.4.2
- [ 1.047332] PPP Deflate Compression module registered
- [ 1.047454] PPP BSD Compression module registered
- [ 1.047760] PPP MPPE Compression module registered
- [ 1.047851] NET: Registered protocol family 24
- [ 1.048217] tun: Universal TUN/TAP device driver, 1.6
- [ 1.048278] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.048736] [RMNTSMD] rmnet_init: SMD devices[8]
- [ 1.051605] [USB] msm_otg probe
- [ 1.051757] [USB] OTG regs = d085a000
- [ 1.051879] [USBH] msm_hsusb_config_vddcx: min_vol:1045000 max_vol:1320000
- [ 1.052001] [USBH] msm_hsusb_ldo_init: ldo3v3, min volt: 3450000, max volt: 3450000
- [ 1.052978] [USBH] reg (HPM)
- [ 1.053283] [USB] mode debugfs file isnot available
- [ 1.053375] [USB] OTG runtime idle
- [ 1.053527] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.053741] [USBH] host driver registered w/ tranceiver
- [ 1.054016] [USBH] peripheral driver registered w/ tranceiver
- [ 1.054138] [USBH] msm_otg_sm_work: state:UNDEFINED bit:0x00000000
- [ 1.054199] [USB] OTG_STATE_UNDEFINED state
- [ 1.054321] [USBH] msm_otg_reset
- [ 1.054748] msm_hsusb msm_hsusb: [usb_gadget_probe_driver] hw_ep_max = 32
- [ 1.056732] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 1.056823] android_usb gadget: Number of LUNs=1
- [ 1.056945] lun0: LUN: removable file: (no medium)
- [ 1.057281] android_usb gadget: android_usb ready
- [ 1.057739] cy8c_ts_init: enter
- [ 1.057891] cy8c_ts_probe: enter
- [ 1.057952] pyramid_ts_cy8c_power():
- [ 1.072906] CY8CTMA340 10-0067: buf: 11, 0, 0, a
- [ 1.073028] CY8CTMA340 10-0067: application verion = A, x_channel = 15, y_channel = B
- [ 1.078857] [USBH] phy_reset: success
- [ 1.182586] [USBH] ulpi: write 0x06 to 0x36
- [ 1.182861] [USBH] ulpi: write 0x0c to 0x31
- [ 1.183105] [USBH] ulpi: write 0x31 to 0x32
- [ 1.183441] [USBH] ulpi: write 0x01 to 0x0e
- [ 1.183715] [USBH] ulpi: write 0x01 to 0x11
- [ 1.184020] [USB] OTG_STATE_B_IDLE state
- [ 1.184082] [USBH] b_sess_vld
- [ 1.212982] CY8CTMA340 10-0067: orient: 0
- [ 1.213104] input_set_abs_params: mix_x 11, max_x 1012, min_y 6, max_y 940
- [ 1.213287] input: cy8c-touchscreen as /devices/virtual/input/input2
- [ 1.213867] CY8CTMA340 10-0067: Start touchscreen cy8c-touchscreen in interrupt mode
- [ 1.214202] [sweep2wake]: set device pyramid-keypad
- [ 1.214508] [KEY] GPIO Input Driver: Start gpio inputs for pyramid-keypad in interrupt mode
- [ 1.214752] input: pyramid-keypad as /devices/virtual/input/input3
- [ 1.215698] using input dev h2w headset for key reset
- [ 1.215820] using input dev pyramid-keypad for key reset
- [ 1.216827] using rtc device, pm8xxx_rtc, for alarms
- [ 1.216918] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
- [ 1.217315] tpa2051d3_init
- [ 1.217773] i2c-core: driver [tpa2051d3] using legacy suspend method
- [ 1.217895] i2c-core: driver [tpa2051d3] using legacy resume method
- [ 1.217987] i2c-core: driver [isl29028] using legacy suspend method
- [ 1.218109] i2c-core: driver [isl29028] using legacy resume method
- [ 1.218200] [PS][ISL29029] isl29029_probe
- [ 1.218536] input: lightsensor-level as /devices/virtual/input/input4
- [ 1.219085] input: proximity as /devices/virtual/input/input5
- [ 1.219543] [LS][ISL29029] lightsensor_set_kvalue: ALS calibrated als_kadc=0x6da5015f
- [ 1.219665] [KEY] gpio_keys_scan_keys: key 1-74, 0 (125) changed to 0
- [ 1.219757] [KEY] gpio_keys_scan_keys: key 1-73, 1 (188) changed to 0
- [ 1.219879] [KEY] gpio_keys_scan_keys: key 1-72, 2 (189) changed to 0
- [ 1.219970] [LS][ISL29029] lightsensor_set_kvalue: als_kadc=0x15f, als_gadc=0x1c2
- [ 1.220092] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[0] = 0
- [ 1.220214] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[1] = 2
- [ 1.220275] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[2] = 3
- [ 1.220397] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[3] = b
- [ 1.220520] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[4] = 16
- [ 1.220642] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[5] = 108
- [ 1.220703] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[6] = 1ca
- [ 1.220794] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[7] = 237
- [ 1.220916] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[8] = 2a5
- [ 1.220977] [LS][ISL29029] lightsensor_update_table: Calibrated adc_table: data[9] = fff
- [ 1.232849] [PS][ISL29029] set_psensor_range: Setting psensor range (0x15, 0x16)
- [ 1.233184] [PS][ISL29029] psensor_set_kvalue: PS calibrated ps_kparam1 = 0x50531522, ps_kparam2 = 0x30e1517
- [ 1.233306] [PS][ISL29029] psensor_set_kvalue: PS calibrated ps_B_val = 0x15, ps_C_val = 0x22, ps_A_val = 0x3, ps_X_val = 0xe, ps_lt = 0x15, ps_ht = 0x17
- [ 1.233428] [PS][ISL29029] psensor_set_kvalue: PS calibrated ps_lt = 0x15, ps_ht = 0x17
- [ 1.233551] [PS][ISL29029] set_psensor_range: Setting psensor range (0x15, 0x17)
- [ 1.233856] [PS][ISL29029] isl29029_probe: Probe success! [CONFIGURE from board]
- [ 1.233978] i2c-core: driver [isl29029] using legacy suspend method
- [ 1.234039] i2c-core: driver [isl29029] using legacy resume method
- [ 1.234344] [CAM]s5k3h1gx_probe
- [ 1.234405] [CAM] msm_camio_clk_enable clktype:6
- [ 1.234558] [CAM] msm_camio_clk_enable clk:0xc0a44588
- [ 1.234680] [CAM]s5k3h1gx_sensor_probe()
- [ 1.234832] [CAM]s5k3h1gx_probe called!
- [ 1.282623] [USBH] msm_chg_detect_work: state:CHG_STATE_UNDEFINED
- [ 1.292633] [CAM]s5k3h1gx_probe successed! rc = 0
- [ 1.292785] [CAM]s5k3h1gx s->node 0x0
- [ 1.292846] [CAM]s5k3h1gx_common_init
- [ 1.292907] [CAM]s5k3h1gx_vreg_enable camera vreg on
- [ 1.293029] [CAM] Pyramid_sensor_vreg_on
- [ 1.325012] [CAM] call Pyramid_sensor_vreg_off() at first boot up !!!
- [ 1.325103] [CAM] Pyramid_sensor_vreg_off
- [ 1.325317] [VREG] vreg_set_voltage: 8058_l9: request v=[0, 0] is outside possible v=[750000, 4900000]
- [ 1.325592] [VREG] vreg_set_voltage: 8058_l15: request v=[0, 0] is outside possible v=[750000, 4900000]
- [ 1.325866] [VREG] vreg_set_voltage: 8058_l12: request v=[0, 0] is outside possible v=[750000, 4900000]
- [ 1.326141] [VREG] vreg_set_voltage: 8058_l10: request v=[0, 0] is outside possible v=[750000, 4900000]
- [ 1.348022] [CAM] Doing clk switch (Main Cam)
- [ 1.363281] [CAM]s5k3h1gx_common_init, Expected id=0x3810
- [ 1.363342] [CAM]s5k3h1gx_common_init, Read id=0x3810
- [ 1.363464] [CAM]s5k3h1gx_common_init done
- [ 1.363525] [CAM]s5k3h1gx:kobject creat and add
- [ 1.363647] [CAM]s5k3h1gx:sysfs_create_file
- [ 1.363708] [CAM]s5k3h1gx_sensor_probe done
- [ 1.363769] [CAM]s5k3h1gx_common_deinit
- [ 1.364898] [CAM]s5k3h1gx_vreg_disable camera vreg off
- [ 1.364959] [CAM] Pyramid_sensor_vreg_off
- [ 1.365173] [VREG] vreg_set_voltage: 8058_l9: request v=[0, 0] is outside possible v=[750000, 4900000]
- [ 1.365447] [VREG] vreg_set_voltage: 8058_l15: request v=[0, 0] is outside possible v=[750000, 4900000]
- [ 1.365722] [VREG] vreg_set_voltage: 8058_l12: request v=[0, 0] is outside possible v=[750000, 4900000]
- [ 1.365966] [VREG] vreg_set_voltage: 8058_l10: request v=[0, 0] is outside possible v=[750000, 4900000]
- [ 1.382659] [USBH] msm_chg_detect_work: state:CHG_WAIT_FOR_DCD
- [ 1.386779] [CAM] msm_sync_init: initialized s5k3h1gx
- [ 1.386871] [CAM] msm_camera_drv_start: setting camera node 0
- [ 1.387847] [CAM]mt9v113_init
- [ 1.388031] [CAM]mt9v113_vreg_enable camera vreg on
- [ 1.388153] [CAM] Pyramid_sensor_vreg_on
- [ 1.389984] [CAM]mt9v113: mt9v113_sensor_probe switch clk
- [ 1.390106] [CAM] Doing clk switch (2nd Cam)
- [ 1.391174] [CAM]__mt9v113_probe
- [ 1.391235] [CAM] msm_camio_clk_enable clktype:6
- [ 1.391357] [CAM] msm_camio_clk_enable clk:0xc0a44588
- [ 1.391540] [CAM]mt9v113_probe succeeded!
- [ 1.391754] [CAM]mt9v113 s->node -1062553676
- [ 1.391815] [CAM] mt9v113_sensor_probe suspend_fail_retry_count=3
- [ 1.391876] [CAM]mt9v113_reset: ++++
- [ 1.394989] [CAM]mt9v113_sensor_probe msm_camio_probe_on()
- [ 1.395050] [CAM] msm_camio_clk_enable clktype:6
- [ 1.395172] [CAM] msm_camio_clk_enable clk:0xc0a44588
- [ 1.395294] [CAM]mt9v113: MCLK enable clk
- [ 1.404052] [CAM]mt9v113_sensor_init: mt9v113: model_id = 0x2280
- [ 1.404174] [CAM]mt9v113_reg_init: Power Up Start
- [ 1.422698] [USBH] msm_chg_detect_work: state:CHG_DCD_DONE
- [ 1.423034] [USBH] msm_chg_detect_work: state:CHG_DETECTED
- [ 1.423889] [USBH] chg_type = USB_SDP_CHARGER
- [ 1.424011] [USBH] msm_otg_sm_work: state:b_idle bit:0x00000003
- [ 1.424102] [USB] OTG_STATE_B_IDLE state
- [ 1.424194] [USBH] b_sess_vld
- [ 1.424255] [USBH] Avail curr from USB = 500
- [ 1.424316] [USBH] gadget on
- [ 1.424468] [USBH] send connect type -1
- [ 1.424530] [USBH] USB forced fast charge : No USB device currently attached
- [ 1.424591] [CABLE] usb_status_notifier_func: cable_type = 1
- [ 1.424774] [CABLE] send_cable_connect_notify: cable_type = 1
- [ 1.464324] [CAM]mt9v113_reg_init: RESET and MISC Control
- [ 1.503814] [CAM] mt9v113_i2c_write_bit check_bit:0xfdff
- [ 1.504486] [CAM] mt9v113_i2c_write_bit: mt9v113: 0x 1a reg value = 0x 10
- [ 1.504638] [CAM] mt9v113_i2c_write_bit: mt9v113: Set to 0x 1a reg value = 0x 10
- [ 1.505249] [CAM] mt9v113_i2c_write_bit check_bit:0x 10
- [ 1.505920] [CAM] mt9v113_i2c_write_bit: mt9v113: 0x3400 reg value = 0x782c
- [ 1.506103] [CAM] mt9v113_i2c_write_bit: mt9v113: Set to 0x3400 reg value = 0x783c
- [ 1.507263] [CAM]mt9v113_reg_init: mt9v113: 0x3400 reg value = 0x783c
- [ 1.507354] [CAM]mt9v113_reg_init: (check 0x3400[4] is 1 ) k=0
- [ 1.517486] [CAM] mt9v113_i2c_write_bit check_bit:0x 200
- [ 1.518157] [CAM] mt9v113_i2c_write_bit: mt9v113: 0x3400 reg value = 0x783c
- [ 1.518341] [CAM] mt9v113_i2c_write_bit: mt9v113: Set to 0x3400 reg value = 0x7a3c
- [ 1.519500] [CAM]mt9v113_reg_init: mt9v113: 0x3400 reg value = 0x7a3c
- [ 1.519622] [CAM]mt9v113_reg_init: (check 0x3400[9] is 1 ) k=0
- [ 1.519683] [CAM] mt9v113_i2c_write_bit check_bit:0xff7f
- [ 1.520385] [CAM] mt9v113_i2c_write_bit: mt9v113: 0x321c reg value = 0x 3
- [ 1.520507] [CAM] mt9v113_i2c_write_bit: mt9v113: Set to 0x321c reg value = 0x 3
- [ 1.542755] [CABLE] check_vbus_in: vbus = 0, vbus_in = 1
- [ 1.542877] [USBH] msm_otg_set_vbus_state: 1
- [ 1.542968] [CABLE] check_vbus_in: Enable vbus irq ++
- [ 1.543121] [USBH] msm_otg_sm_work: state:b_peripheral bit:0x00000003
- [ 1.543243] [USB] OTG_STATE_B_PERIPHERAL state
- [ 1.543304] [USBH] do nothing !!!
- [ 1.612731] HDMI: hdmi_msm_hpd_off: (timer, clk, 5V, core, IRQ off)
- [ 1.612792] HDMI: HDMI Core: Disable
- [ 1.612945] hdmi_enable_5v(off): success
- [ 1.613006] hdmi_core_power(off): success
- [ 1.613067] HDMI: HDMI Clk: Disable
- [ 1.613189] HDMI: HDMI Core: Disable
- [ 1.613250] [DISP] Drv: ReadHPD: D
- [ 1.613311] HDMI: hdmi_msm_hpd_state_work: ignored, probe failed
- [ 1.634460] [CAM] mt9v113_i2c_write_bit check_bit:0x 8
- [ 1.635131] [CAM] mt9v113_i2c_write_bit: mt9v113: 0x3210 reg value = 0x 9a0
- [ 1.635314] [CAM] mt9v113_i2c_write_bit: mt9v113: Set to 0x3210 reg value = 0x 9a8
- [ 1.898498] [CAM]suspend: mt9v113: Set to 0x0018 reg value = 0x2b
- [ 1.899719] [CAM]suspend: ( check 0x0018[14] is 1 ) k=0
- [ 1.913421] [CAM]mt9v113_sensor_probe: mt9v113: 0x0016 reg value = 0x20
- [ 1.913543] [CAM]mt9v113_sensor_probe: mt9v113: Set to 0x0016 reg value = 0x0
- [ 1.932800] [CAM]mt9v113:kobject creat and add
- [ 1.932861] [CAM]mt9v113:sysfs_create_file
- [ 1.933959] [CAM]mt9v113_sensor_probe msm_camio_probe_off()
- [ 1.935058] [CAM]mt9v113_sensor_probe: doing clk switch to Main CAM)
- [ 1.936126] [CAM] mt9v113_vreg_disable camera vreg off
- [ 1.936187] [CAM] Pyramid_sensor_vreg_off
- [ 1.936431] [VREG] vreg_set_voltage: 8058_l9: request v=[0, 0] is outside possible v=[750000, 4900000]
- [ 1.936706] [VREG] vreg_set_voltage: 8058_l15: request v=[0, 0] is outside possible v=[750000, 4900000]
- [ 1.936981] [VREG] vreg_set_voltage: 8058_l12: request v=[0, 0] is outside possible v=[750000, 4900000]
- [ 1.937255] [VREG] vreg_set_voltage: 8058_l10: request v=[0, 0] is outside possible v=[750000, 4900000]
- [ 1.957397] [CAM]/home/build/ubuild/kernel/htc/pyramid/drivers/media/video/msm/sensors/mt9v113.c mt9v113_sensor_probe:2602
- [ 1.957519] [CAM] msm_sync_init: initialized mt9v113
- [ 1.957580] [CAM] msm_camera_drv_start: setting camera node 1
- [ 1.958984] [CAM] msm_gemini_init gemini: success
- [ 1.959869] msm_adc successfully registered
- [ 1.960266] [THERMAL][pm8901_tz] Current temperature [0]...
- [ 1.960418] [THERMAL][pm8901_tz] Current temperature [37000]...
- [ 1.960632] pmic8901_tm_probe: OK
- [ 1.960845] [THERMAL][tsens_tz_sensor0] Current temperature [42]...
- [ 1.960968] [THERMAL][tsens_tz_sensor1] Current temperature [59]...
- [ 1.961151] [THERMAL][tsens_tz_sensor2] Current temperature [68]...
- [ 1.961273] [THERMAL][tsens_tz_sensor3] Current temperature [61]...
- [ 1.961486] [THERMAL][tsens_tz_sensor4] Current temperature [48]...
- [ 1.961608] [THERMAL][tsens_tz_sensor5] Current temperature [90]...
- [ 1.961730] tsens_tm_init: OK
- [ 1.962554] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- [ 1.962768] Bluetooth: HCI UART driver ver 2.2
- [ 1.962890] Bluetooth: HCI H4 protocol initialized
- [ 1.963165] cpuidle: using governor ladder
- [ 1.963226] cpuidle: using governor menu
- [ 1.963714] [SD] mmc0: No card detect facilities available
- [ 1.963897] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
- [ 1.964019] mmc0: Platform slot type: MMC
- [ 1.964080] mmc0: 8 bit data mode enabled
- [ 1.964141] mmc0: 4 bit data mode disabled
- [ 1.964263] mmc0: polling status mode disabled
- [ 1.964324] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 1.964447] mmc0: Slot eject status = 0
- [ 1.964508] mmc0: Power save feature enable = 1
- [ 1.964569] mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x573c0000
- [ 1.964691] mmc0: DM cmd busaddr 0x573c0000, cmdptr busaddr 0x573d7f40
- [ 1.965332] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,654 dma 20 dmacrcri 2
- [ 1.965393] mmc1: Platform slot type: SD
- [ 1.965515] mmc1: 8 bit data mode disabled
- [ 1.965576] mmc1: 4 bit data mode enabled
- [ 1.965637] mmc1: polling status mode disabled
- [ 1.965759] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 1.965820] mmc1: Slot eject status = 0
- [ 1.965942] mmc1: Power save feature enable = 1
- [ 1.966003] mmc1: DM non-cached buffer at ffda0000, dma_addr 0x573e0000
- [ 1.966125] mmc1: DM cmd busaddr 0x573e0000, cmdptr busaddr 0x573f7f40
- [ 1.966522] mmc2: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
- [ 1.966644] mmc2: Platform slot type: Unknown type
- [ 1.966705] mmc2: 8 bit data mode disabled
- [ 1.966827] mmc2: 4 bit data mode enabled
- [ 1.966888] mmc2: polling status mode disabled
- [ 1.966949] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 1.967071] mmc2: Slot eject status = 1
- [ 1.967132] mmc2: Power save feature enable = 1
- [ 1.967224] mmc2: DM non-cached buffer at ffd80000, dma_addr 0x56600000
- [ 1.967285] mmc2: DM cmd busaddr 0x56600000, cmdptr busaddr 0x56617f40
- [ 1.967987] Registered led device: green
- [ 1.968109] Registered led device: amber
- [ 1.968261] Registered led device: button-backlight
- [ 1.968353] [sweep2wake]: set led device button-backlight, bank 6
- [ 1.968566] Registered led device: flashlight
- [ 1.968688] [FLT]flashlight_probe: led_count = 2
- [ 1.968750] [FLT]flashlight_probe: The Flashlight Driver is ready
- [ 1.969177] qce qce.0: Qualcomm Crypto 3 device found at 0x18500000
- [ 1.969940] qcrypto qcrypto.0: Qualcomm Crypto 3 device found at 0x18500000
- [ 1.970184] qcrypto qcrypto.0: qcrypto-ecb-aes
- [ 1.970306] qcrypto qcrypto.0: qcrypto-cbc-aes
- [ 1.970489] qcrypto qcrypto.0: qcrypto-ctr-aes
- [ 1.970611] qcrypto qcrypto.0: qcrypto-ecb-des
- [ 1.970794] qcrypto qcrypto.0: qcrypto-cbc-des
- [ 1.970916] qcrypto qcrypto.0: qcrypto-ecb-3des
- [ 1.971008] qcrypto qcrypto.0: qcrypto-cbc-3des
- [ 1.971191] qcrypto qcrypto.0: qcrypto-sha1
- [ 1.971313] qcrypto qcrypto.0: qcrypto-sha256
- [ 1.972290] logger: created 256K log 'log_main'
- [ 1.972595] logger: created 256K log 'log_events'
- [ 1.972869] logger: created 256K log 'log_radio'
- [ 1.973175] logger: created 256K log 'log_system'
- [ 1.974456] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
- [ 1.974731] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
- [ 1.974975] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
- [ 1.975677] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
- [ 1.976593] ALSA device list:
- [ 1.976654] #0: msm-audio
- [ 1.976806] Mirror/redirect action on
- [ 1.976867] u32 classifier
- [ 1.976928] Actions configured
- [ 1.976989] Netfilter messages via NETLINK v0.30.
- [ 1.977081] nf_conntrack version 0.5.0 (8294 buckets, 33176 max)
- [ 1.977508] ctnetlink v0.93: registering with nfnetlink.
- [ 1.977630] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 1.977722] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 1.978302] xt_time: kernel timezone is -0000
- [ 1.978515] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.978729] arp_tables: (C) 2002 David S. Miller
- [ 1.978881] TCP cubic registered
- [ 1.978942] Initializing XFRM netlink socket
- [ 1.979370] NET: Registered protocol family 10
- [ 1.980407] Mobile IPv6
- [ 1.980499] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.980712] IPv6 over IPv4 tunneling driver
- [ 1.981445] NET: Registered protocol family 17
- [ 1.981536] NET: Registered protocol family 15
- [ 1.981750] Bluetooth: RFCOMM socket layer initialized
- [ 1.981842] Bluetooth: RFCOMM ver 1.11
- [ 1.981903] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 1.981964] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 1.982055] lib80211: common routines for IEEE802.11 drivers
- [ 1.982177] lib80211_crypt: registered algorithm 'NULL'
- [ 1.982238] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
- [ 1.982421] ThumbEE CPU extension supported.
- [ 1.983245] clock_late_init() disabled 182 unused clocks
- [ 1.983795] [MPDEC]: msm_mpdec init complete.
- [ 1.983856] [K][Port list] init()
- [ 1.984008] [K][Port list] Virtual Address for port_list: [ (null)]
- [ 1.984100] [K][Port list] Physical Address for port_list: [41E00000]
- [ 1.984771] [K][Port list] port_list is NULL.
- [ 1.984832] [K][Port list] packet filter is disabled.
- [ 1.985595] [K] Acquire 'boot-time' no_halt_lock 60s
- [ 2.016326] configure_bark_dump: dogbark processed by apps side
- [ 2.021636] MSM Watchdog Initialized
- [ 2.026977] [BATT] cable USB not forced to AC at 1944233090 (1970-01-01 00:00:01.944141549 UTC)
- [ 2.061126] [BATT] vref ADC: 18617 18602 18617 18617 18602 at 1978683138 (1970-01-01 00:00:01.978286458 UTC)
- [ 2.080047] mmc0: new high speed MMC card at address 0001
- [ 2.080474] mmcblk0: mmc0:0001 MLL00M 2.25 GiB
- [ 2.099182] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 >
- [ 2.110076] msm_sdcc_setup_vreg: Enabling SD slot power
- [ 2.113830] [BATT] htc_batt_get_battery_adc , vref:18304, battid_adc:2249, battid:122
- [ 2.114532] at 2031685989 (1970-01-01 00:00:02.030953649 UTC)
- [ 2.114929] [BATT] htc_battery_probe(): finish at 2032784500 (1970-01-01 00:00:02.032113188 UTC)
- [ 2.116973] init_rq_attribs: Initialize done.
- [ 2.117370] no pmic restart interrupt specified
- [ 2.124908] [WLAN] ## wifi_probe
- [ 2.125000] [WLAN][WRN] wifi_set_power = 1
- [ 2.125091] pyramid_wifi_power: 1
- [ 2.195739] mmc1: host does not support reading read-only switch. assuming write-enable.
- [ 2.198120] mmc1: new high speed SDHC card at address 0001
- [ 2.199920] mmcblk1: mmc1:0001 00000 29.2 GiB
- [ 2.202270] mmcblk1: p1 p2
- [ 2.247802] [WLAN] wifi_set_carddetect = 1
- [ 2.247863] pyramid_wifi_set_carddetect: 1
- [ 2.247924] mmc2: Slot status change detected (0 -> 1)
- [ 2.248138] [WLAN] Dongle Host Driver, version 5.90.125.120
- [ 2.300354] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
- [ 2.301147] mmc2: new high speed SDIO card at address 0001
- [ 2.305206] [WLAN] alloc static buf at cf980000!
- [ 2.307647] [WLAN][WRN] DHD: dongle ram size is set to 294912(orig 294912)
- [ 2.311462] [WLAN] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- [ 2.312133] [WLAN][WRN] wifi_set_power = 0
- [ 2.312500] pyramid_wifi_power: 0
- [ 2.319915] bcmsdh_sdmmc: probe of mmc2:0001:3 failed with error -110
- [ 2.437713] [WLAN] =========== WLAN placed in RESET ========
- [ 2.437835] [WLAN] [ATS][press_widget][launch]
- [ 2.438323] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2014-01-25 21:01:23 UTC (1390683683)
- [ 2.438537] Warning: unable to open an initial console.
- [ 2.438751] Freeing init memory: 208K
- <30>[ 2.633453] systemd-udevd[132]: starting version 204
- [ 4.433532] [USBH] ac_detect_expired: count = 0, connect_type = -1
- [ 4.699157] initrd: Couldn't find data partition. Spawning adbd ...
- [ 4.734405] initrd: enabling USB debugging
- [ 4.745605] initrd: starting adbd for USB debugging
- [ 4.766998] adb_open
- [ 4.767364] adb_bind_config
- [ 4.886413] [USBH] Avail curr from USB = 0
- [ 4.887939] android_work: did not send uevent (0 0 (null))
- [ 4.998229] android_work: sent uevent USB_STATE=CONNECTED
- [ 5.006652] android_usb gadget: high speed config #1: android
- [ 5.007141] [USBH] Avail curr from USB = 500
- [ 5.008087] android_work: sent uevent USB_STATE=CONFIGURED
- [ 9.191711] adbd (183): /proc/183/oom_adj is deprecated, please use /proc/183/oom_score_adj instead.
- [ 9.443603] [USBH] ac_detect_expired: count = 1, connect_type = -1
- [ 10.593658] [HS_PMIC] (irq_init_work_func) Setup button IRQ type
- [ 10.594390] [HS_GPIO] (irq_init_work_func) Enable detect IRQ
- [ 10.713684] [DISP] init_complete_handler()
- # mount
- rootfs on / type rootfs (rw)
- sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
- proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
- udev on /dev type devtmpfs (rw,relatime,size=264256k,nr_inodes=58145,mode=755)
- devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
- tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=53112k,mode=755)
- #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement