API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jun 23rd, 2016
324
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 54.80 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000@0] Booting Linux on physical CPU 0x200
  2. [ 0.000000@0] Linux version 3.10.99 (kszaq@CompileServer) (gcc version 5.3.0 (GCC) ) #1 SMP PREEMPT Thu Jun 23 14:50:10 CEST 2016
  3. [ 0.000000@0] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
  4. [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000@0] Machine: Amlogic Meson8B, model: AMLOGIC
  6. [ 0.000000@0] physical memory start address is 0x200000
  7. [ 0.000000@0] reserved_end is bffffff
  8. [ 0.000000@0]
  9. [ 0.000000@0] Total memory is 1022 MiB
  10. [ 0.000000@0] Reserved low memory from 0x06000000 to 0x0bffffff, size: 96 MiB
  11. [ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB)
  12. [ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB)
  13. [ 0.000000@0] deinterlace0(high) : 0x3df00000 - 0x40000000 ( 33 MiB)
  14. [ 0.000000@0] mesonstream0(high) : 0x3bf00000 - 0x3df00000 ( 32 MiB)
  15. [ 0.000000@0] vdec0(low) : 0x07a00000 - 0x0ba00000 ( 64 MiB)
  16. [ 0.000000@0] ppmgr0(high) : 0x39f00000 - 0x3bf00000 ( 32 MiB)
  17. [ 0.000000@0] amvideocap0(low) : 0x0ba00000 - 0x0c000000 ( 6 MiB)
  18. [ 0.000000@0] get storage device: storage 2
  19. [ 0.000000@0] value=2
  20. [ 0.000000@0] get_storage_device : get storage device: storage 2
  21. [ 0.000000@0] get_storage_device : value=2
  22. [ 0.000000@0] [get_storage_device] storage_flag=2
  23. [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
  24. [ 0.000000@0] On node 0 totalpages: 208640
  25. [ 0.000000@0] free_area_init_node: node 0, pgdat c07ef500, node_mem_map c0a1d000
  26. [ 0.000000@0] Normal zone: 1520 pages used for memmap
  27. [ 0.000000@0] Normal zone: 0 pages reserved
  28. [ 0.000000@0] Normal zone: 166400 pages, LIFO batch:31
  29. [ 0.000000@0] HighMem zone: 330 pages used for memmap
  30. [ 0.000000@0] HighMem zone: 42240 pages, LIFO batch:7
  31. [ 0.000000@0] Meson chip version = RevA (1B:A - 0:B72)
  32. [ 0.000000@0] PERCPU: Embedded 7 pages/cpu @c1166000 s7360 r8192 d13120 u32768
  33. [ 0.000000@0] pcpu-alloc: s7360 r8192 d13120 u32768 alloc=8*4096
  34. [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  35. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 207120
  36. [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200n8 no_console_suspend storage=2 cvbsdrv=0 vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full hdmimode=720p cvbsmode=576cvbs androidboot.firstboot=1 hdmitx=cecf console=tty0 consoleblank=0 usbcore.autosuspend=-1 systemd.show_status=auto
  37. [ 0.000000@0] cvbs performance line = 0
  38. [ 0.000000@0] cvbs trimming line = 0xa000
  39. [ 0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0
  40. [ 0.000000@0] osd1:1
  41. [ 0.000000@0] loaded:268435459
  42. [ 0.000000@0] logo has been loaded
  43. [ 0.000000@0] 720p:11
  44. [ 0.000000@0] full:2
  45. [ 0.000000@0] kernel get hdmimode form uboot is 720p
  46. [ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs
  47. [ 0.000000@0] hdmitx: cec: Function List: enable, one touch play, one touch standby, auto power by tv
  48. [ 0.000000@0] hdmitx: cec: HDMI aml_read_reg32(P_AO_DEBUG_REG0):0xf
  49. [ 0.000000@0] hdmitx: cec: HDMI hdmi_cec_func_config:0xf
  50. [ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
  51. [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  52. [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  53. [ 0.000000@0] Memory: 64MB 16MB 735MB = 815MB total
  54. [ 0.000000@0] Memory: 813828k/813828k available, 20732k reserved, 168960K highmem
  55. [ 0.000000@0] Virtual kernel memory layout:
  56. [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  57. [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  58. [ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  59. [ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  60. [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  61. [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  62. [ 0.000000@0] .text : 0xc0008000 - 0xc076a918 (7563 kB)
  63. [ 0.000000@0] .init : 0xc076b000 - 0xc0798cc0 ( 184 kB)
  64. [ 0.000000@0] .data : 0xc079a000 - 0xc07f0358 ( 345 kB)
  65. [ 0.000000@0] .bss : 0xc07f0358 - 0xc0a1895c (2210 kB)
  66. [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  67. [ 0.000000@0] Preemptible hierarchical RCU implementation.
  68. [ 0.000000@0] RCU debugfs-based tracing is enabled.
  69. [ 0.000000@0] NR_IRQS:256
  70. [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  71. [ 0.000000@0] Global timer: MESON TIMER-F (c07b5080) initialized
  72. [ 0.000000@0] Switching to timer-based delay loop
  73. [ 0.000000@0] Console: colour dummy device 80x30
  74. [ 0.000000@0] console [tty0] enabled
  75. [ 0.000000@0] meson_serial_console_setup
  76. [ 0.000000@0] console [ttyS0] enabled
  77. [ 0.374015@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
  78. [ 0.384285@0] pid_max: default: 32768 minimum: 301
  79. [ 0.389320@0] Mount-cache hash table entries: 512
  80. [ 0.394998@0] CPU: Testing write buffer coherency: ok
  81. [ 0.399191@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
  82. [ 0.404657@0] Setting up static identity map for 0xc057a6d8 - 0xc057a730
  83. [ 0.411397@0] L310 cache controller enabled
  84. [ 0.415368@0] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c9, Cache size: 524288 B
  85. [ 0.422859@0] AUX_CTRL 0x7ec60001, PERFETCH_CTRL 0x75000007, POWER_CTRL 0x00000000
  86. [ 0.430963@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
  87. [ 0.490388@1] CPU1: Booted secondary processor
  88. [ 0.490408@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
  89. [ 0.510370@2] CPU2: Booted secondary processor
  90. [ 0.510390@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
  91. [ 0.530366@3] CPU3: Booted secondary processor
  92. [ 0.530386@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
  93. [ 0.530497@0] Brought up 4 CPUs
  94. [ 0.558696@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
  95. [ 0.564922@0] CPU: All CPU(s) started in SVC mode.
  96. [ 0.570495@0] devtmpfs: initialized
  97. [ 0.581342@0] clkrate [ xtal ] : 24000000
  98. [ 0.581399@0] clkrate [ pll_sys ] : 792000000
  99. [ 0.584243@0] clkrate [ pll_fixed ] : 2550000000
  100. [ 0.588918@0] clkrate [ pll_vid ] : 366000000
  101. [ 0.593352@0] clkrate [ pll_ddr ] : 0
  102. [ 0.597058@0] clkrate [ a9_clk ] : 792000000
  103. [ 0.601401@0] clkrate [ clk81 ] : 159375000
  104. [ 0.606457@0] pinctrl core: initialized pinctrl subsystem
  105. [ 0.611594@0] regulator-dummy: no parameters
  106. [ 0.615601@0] NET: Registered protocol family 16
  107. [ 0.624215@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  108. [ 0.629544@0] VPU driver version: v02
  109. [ 0.630593@0] load vpu_clk in dts: 182150000Hz(3)
  110. [ 0.635362@0] vpu_probe OK
  111. [ 0.645867@0] amlogic_gpio gpio: Probed amlogic GPIO driver
  112. [ 0.646630@0] register lm device lm-root
  113. [ 0.649877@0] register lm device lm1
  114. [ 0.653458@0] register lm device lm0
  115. [ 0.657232@0] Init pinux probe!
  116. [ 0.660771@0] pinmux-m8b pinmux: Probed amlogic pinctrl driver
  117. [ 0.666101@0] -------early_init_dt_init:115----------
  118. [ 0.670780@0] tv_init_module
  119. [ 0.673627@0] major number 254 for disp
  120. [ 0.677426@0] vout_register_server
  121. [ 0.680818@0] register tv module server ok
  122. [ 0.685058@0] aml_i2c version: 20140813
  123. [ 0.688893@0] call aml_dvfs_init in
  124. [ 0.692225@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs
  125. [ 0.692241@0] [DVFS]dvfs table of vcck_dvfs is:
  126. [ 0.692252@0] [DVFS] freq, min_uV, max_uV
  127. [ 0.692262@0] [DVFS] 96000, 860000, 860000
  128. [ 0.692272@0] [DVFS] 192000, 860000, 860000
  129. [ 0.692282@0] [DVFS] 312000, 860000, 860000
  130. [ 0.692291@0] [DVFS] 408000, 860000, 860000
  131. [ 0.692301@0] [DVFS] 504000, 860000, 860000
  132. [ 0.692310@0] [DVFS] 600000, 860000, 860000
  133. [ 0.692320@0] [DVFS] 720000, 860000, 860000
  134. [ 0.692329@0] [DVFS] 816000, 900000, 900000
  135. [ 0.692339@0] [DVFS] 1008000, 920000, 920000
  136. [ 0.692348@0] [DVFS] 1200000, 970000, 970000
  137. [ 0.692358@0] [DVFS] 1320000, 1100000, 1100000
  138. [ 0.692367@0] [DVFS] 1488000, 1100000, 1100000
  139. [ 0.692377@0] [DVFS] 1536000, 1140000, 1140000
  140. [ 0.692681@0] hdmitx: system: amhdmitx_init
  141. [ 0.696303@0] hdmitx: system: Ver: 2014May6
  142. [ 0.700565@0] hdmitx: system: amhdmitx_probe
  143. [ 0.705404@0] hdmitx: system: gate/pwr cmd: 7
  144. [ 0.709034@0] hdmitx: system: ALREADY init VIC = 4
  145. [ 0.713814@0] hdmitx: system: gate/pwr cmd: 0
  146. [ 0.718595@3] hdmitx: system: reset intr mask
  147. [ 0.740438@0] hdmitx: system: irq 1
  148. [ 0.795423@1] bio: create slab <bio-0> at 0
  149. [ 0.796836@2] SCSI subsystem initialized
  150. [ 0.798588@2] usbcore: registered new interface driver usbfs
  151. [ 0.803715@2] usbcore: registered new interface driver hub
  152. [ 0.809169@2] usbcore: registered new device driver usb
  153. [ 0.815233@2] mode is 11,sync_duration_den=1,sync_duration_num=60
  154. [ 0.820241@2] request vpu clk holdings: vencp 106250000Hz
  155. [ 0.825710@2] TV mode 720p selected.
  156. [ 0.829159@2] already display in uboot
  157. [ 0.832902@2] vinfo mode is: 720p
  158. [ 0.840989@2] call aml_pmu_probe_init in
  159. [ 0.841380@2] get property: use_pwm, value:0x00000001, dec: 1
  160. [ 0.847776@2] get property: table_count, value:0x0000001d, dec: 29
  161. [ 0.850824@3] hdmitx: system: gate/pwr cmd: 4
  162. [ 0.859838@2] meson_cs_dvfs_probe, table count:29, use_pwm:1, pwm controller:2
  163. [ 0.867007@2] 0, 001c0000, 860000
  164. [ 0.870475@2] 1, 001b0001, 870000
  165. [ 0.873921@2] 2, 001a0002, 880000
  166. [ 0.877384@2] 3, 00190003, 890000
  167. [ 0.880859@2] 4, 00180004, 900000
  168. [ 0.884311@2] 5, 00170005, 910000
  169. [ 0.887774@2] 6, 00160006, 920000
  170. [ 0.891254@2] 7, 00150007, 930000
  171. [ 0.894702@2] 8, 00140008, 940000
  172. [ 0.898165@2] 9, 00130009, 950000
  173. [ 0.901640@2] 10, 0012000a, 960000
  174. [ 0.905092@2] 11, 0011000b, 970000
  175. [ 0.908556@2] 12, 0010000c, 980000
  176. [ 0.912035@2] 13, 000f000d, 990000
  177. [ 0.915483@2] 14, 000e000e, 1000000
  178. [ 0.918946@2] 15, 000d000f, 1010000
  179. [ 0.922421@2] 16, 000c0010, 1020000
  180. [ 0.925873@2] 17, 000b0011, 1030000
  181. [ 0.929337@2] 18, 000a0012, 1040000
  182. [ 0.932810@2] 19, 00090013, 1050000
  183. [ 0.936264@2] 20, 00080014, 1060000
  184. [ 0.939727@2] 21, 00070015, 1070000
  185. [ 0.943200@2] 22, 00060016, 1080000
  186. [ 0.946655@2] 23, 00050017, 1090000
  187. [ 0.950118@2] 24, 00040018, 1100000
  188. [ 0.953591@2] 25, 00030019, 1110000
  189. [ 0.957045@2] 26, 0002001a, 1120000
  190. [ 0.960518@2] 27, 0001001b, 1130000
  191. [ 0.963972@2] 28, 0000001c, 1140000
  192. [ 0.967490@2] get pin for pwm--------
  193. [ 0.971090@2] [DVFS]aml_dvfs_register_driver, driver meson-cs-dvfs regist success, mask:1, source id:1
  194. [ 0.971650@2] Advanced Linux Sound Architecture Driver Initialized.
  195. [ 0.979196@2] Switching to clocksource Timer-E
  196. [ 0.999970@2] NET: Registered protocol family 2
  197. [ 1.000903@2] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  198. [ 1.006278@2] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  199. [ 1.012837@2] TCP: Hash tables configured (established 8192 bind 8192)
  200. [ 1.019220@2] TCP: reno registered
  201. [ 1.022558@2] UDP hash table entries: 512 (order: 2, 16384 bytes)
  202. [ 1.028623@2] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  203. [ 1.035436@2] NET: Registered protocol family 1
  204. [ 1.039900@2] RPC: Registered named UNIX socket transport module.
  205. [ 1.045670@2] RPC: Registered udp transport module.
  206. [ 1.050495@2] RPC: Registered tcp transport module.
  207. [ 1.055361@2] RPC: Registered tcp NFSv4.1 backchannel transport module.
  208. [ 1.062029@2] wifi_dev_probe
  209. [ 1.062124@3] hdmitx: system: gate/pwr cmd: 5
  210. [ 1.062128@3] hdmitx: edid: edid ready
  211. [ 1.062131@3] hdmitx: system: gate/pwr cmd: 4
  212. [ 1.077188@2] wifi_dt : interrupt_pin=GPIOX_21
  213. [ 1.081590@2] wifi_dt : irq_num=null
  214. [ 1.085180@2] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
  215. [ 1.090241@2] wifi_dt : power_on_pin=GPIOAO_6
  216. [ 1.094591@2] wifi_dt : power_on_pin2=GPIOX_11
  217. [ 1.098994@2] interrupt_pin=118, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=107
  218. [ 1.108063@2] Unpacking initramfs...
  219. [ 1.257408@2] Freeing initrd memory: 1940K (c4e08000 - c4fed000)
  220. [ 1.260195@2] bounce pool size: 64 pages
  221. [ 1.272098@3] hdmitx: system: gate/pwr cmd: 5
  222. [ 1.272157@3] hdmitx: edid: edid ready
  223. [ 1.272730@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  224. [ 1.274637@2] NFS: Registering the id_resolver key type
  225. [ 1.274680@2] Key type id_resolver registered
  226. [ 1.274683@2] Key type id_legacy registered
  227. [ 1.276097@2] msgmni has been set to 1263
  228. [ 1.277661@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  229. [ 1.277668@2] io scheduler noop registered
  230. [ 1.277688@2] io scheduler fiops registered (default)
  231. [ 1.281716@2] loop: module loaded
  232. [ 1.283484@2] tun: Universal TUN/TAP device driver, 1.6
  233. [ 1.283488@2] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  234. [ 1.283753@2] PPP generic driver version 2.4.2
  235. [ 1.284085@2] NET: Registered protocol family 24
  236. [ 1.284262@2] usbcore: registered new interface driver smsc95xx
  237. [ 1.284430@2] usbcore: registered new interface driver qf9700
  238. [ 1.284566@2] usbcore: registered new interface driver sr9600
  239. [ 1.285000@2] usbcore: registered new interface driver usb-storage
  240. [ 1.285273@2] mousedev: PS/2 mouse device common for all mice
  241. [ 1.285498@2] i2c /dev entries driver
  242. [ 1.286362@2] hidraw: raw HID events driver (C) Jiri Kosina
  243. [ 1.290133@2] usbcore: registered new interface driver usbhid
  244. [ 1.290135@2] usbhid: USB HID core driver
  245. [ 1.290954@2] zram: Created 1 device(s) ...
  246. [ 1.290977@2] vout_init_module
  247. [ 1.291046@2] start init vout module
  248. [ 1.291208@2] create vout attribute ok
  249. [ 1.291416@2] ge2d_init
  250. [ 1.291427@2] ge2d_dev major:247
  251. [ 1.291866@0] ge2d start monitor
  252. [ 1.291935@0] osd_init
  253. [ 1.291939@2] ge2d workqueue monitor start
  254. [ 1.291996@0] osd_probe, vinfo:c05abe54
  255. [ 1.292426@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
  256. [ 1.292431@0] osd_probe, mydef_var:c07da674, vinfo:c05abe54
  257. [ 1.292436@0] init fbdev bpp is :32
  258. [ 1.292439@0] ---------------clear framebuffer0 memory
  259. [ 1.442613@1] hdmitx: edid: check sum valid
  260. [ 1.446705@1] hdmitx: edid: check sum valid
  261. [ 1.450862@1] hdmitx: edid: blk0 raw data
  262. [ 1.458014@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0600000, size=1024K
  263. [ 1.458019@0] osd_probe, mydef_var:c07da674, vinfo:c05abe54
  264. [ 1.458022@0] don't find to display_size_default from mesonfb-dts
  265. [ 1.458025@0] init fbdev bpp is :24
  266. [ 1.454865@1] 00ffffffffffff004c2de507000000002f14010380703f780aee91a3544c9926
  267. [ 1.491178@0] osd probe ok
  268. [ 1.491464@0] enter aml_sysled_init
  269. [ 1.491568@0] enter aml_sysled_probe
  270. [ 1.491570@0] start read sedio dts
  271. [ 1.491575@0] sysled pdata->name:aml-setio
  272. [ 1.491580@0] sysled pdata->red_led_mode:0
  273. [ 1.491584@0] sysled pdata->blue_led_mode:1
  274. [ 1.491593@0] red_led_gpio is 13
  275. [ 1.491598@0] blue_led_gpio is 13
  276. [ 1.503381@0] DI: di_init
  277. [ 1.503427@0] DI: di_probe
  278. [ 1.504145@0] aml_wdt_driver_init,306
  279. [ 1.504148@0] ** disable watchdog
  280. [ 1.504463@0] keys===========================================
  281. [ 1.504469@0] keys_devno=f400000
  282. [ 1.504840@0] securitykey: device aml_keys created
  283. [ 1.504859@0] amlkeys=0
  284. [ 1.505002@0] platform_driver_register--aml_keys_driver--------------------
  285. [ 1.505448@0] start uart_ao_ttyS0:(irq = 122)
  286. [ 1.505451@0] register uart_ao ok
  287. [ 1.505825@0] start uart_a_ttyS1:(irq = 58)
  288. [ 1.505828@0] register uart_a ok
  289. [ 1.506231@0] set uart_b pinmux use pinctrl subsystem
  290. [ 1.506234@0] P_AO_RTI_PIN_MUX_REG:78005861
  291. [ 1.506257@0] start uart_b_ttyS2:(irq = 107)
  292. [ 1.506261@0] register uart_b ok
  293. [ 1.506650@0] start uart_d_ttyS4:(irq = 126)
  294. [ 1.506654@0] register uart_d ok
  295. [ 1.506907@0] dwc_otg: version 3.10a 12-MAY-2014
  296. [ 1.506941@0] dwc_otg_driver_probe NOT match
  297. [ 1.506983@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
  298. [ 1.506998@0] USB (1) use clock source: XTAL input
  299. [ 1.528120@2] Core Release: 3.10a
  300. [ 1.528127@2] Setting default values for core params
  301. [ 1.528138@2] curmode: 1, host_only: 1
  302. [ 1.548344@2] Using Buffer DMA mode
  303. [ 1.548351@2] OTG VER PARAM: 1, OTG VER FLAG: 1
  304. [ 1.548355@2] Working on port type = HOST
  305. [ 1.548431@2] dwc_otg lm1: DWC OTG Controller
  306. [ 1.548461@2] dwc_otg lm1: new USB bus registered, assigned bus number 1
  307. [ 1.548496@2] dwc_otg lm1: irq 63, io mem 0x00000000
  308. [ 1.548500@2] -------hcd->flags.d32 = 0
  309. [ 1.548524@2] Init: Port Power? op_state=1
  310. [ 1.548527@2] Init1: Power Port (0)
  311. [ 1.548657@2] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  312. [ 1.548666@2] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  313. [ 1.548673@2] usb usb1: Product: DWC OTG Controller
  314. [ 1.548679@2] usb usb1: Manufacturer: Linux 3.10.99 dwc_otg_hcd
  315. [ 1.548686@2] usb usb1: SerialNumber: lm1
  316. [ 1.549508@2] hub 1-0:1.0: USB hub found
  317. [ 1.549529@2] hub 1-0:1.0: 1 port detected
  318. [ 1.549827@2] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
  319. [ 1.549840@2] USB (0) use clock source: XTAL input
  320. [ 1.570939@3] Core Release: 3.10a
  321. [ 1.570952@3] Setting default values for core params
  322. [ 1.570962@3] curmode: 1, host_only: 0
  323. [ 1.631144@3] Using Buffer DMA mode
  324. [ 1.631151@3] OTG VER PARAM: 1, OTG VER FLAG: 1
  325. [ 1.631155@3] Working on port type = OTG
  326. [ 1.631158@3] Current port type: SLAVE
  327. [ 1.631225@3] dwc_otg lm0: DWC OTG Controller
  328. [ 1.631253@3] dwc_otg lm0: new USB bus registered, assigned bus number 2
  329. [ 1.631285@3] dwc_otg lm0: irq 62, io mem 0x00000000
  330. [ 1.631347@3] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  331. [ 1.631355@3] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  332. [ 1.631362@3] usb usb2: Product: DWC OTG Controller
  333. [ 1.631369@3] usb usb2: Manufacturer: Linux 3.10.99 dwc_otg_hcd
  334. [ 1.631375@3] usb usb2: SerialNumber: lm0
  335. [ 1.632152@3] hub 2-0:1.0: USB hub found
  336. [ 1.632177@3] hub 2-0:1.0: 1 port detected
  337. [ 1.632441@3] Dedicated Tx FIFOs mode
  338. [ 1.632638@3] using timer detect id change, ef3b9c00
  339. [ 1.632918@3] boot_device_flag : -1
  340. [ 1.632921@3] do not init nand
  341. [ 1.633079@3] boot_device_flag : -1
  342. [ 1.635862@3] amvideocap_init_module
  343. [ 1.635923@3] amvideocap_probe,amvideocap
  344. [ 1.635930@3] amvideocap_dev_register buf:0ba00000,size:600000.
  345. [ 1.636554@3] Amlogic A/V streaming port init
  346. [ 1.639478@3] buffersize=262144,0,start=0
  347. [ 1.639492@3] Subtitle stbuf alloced at 0xee7c0000, size = 262144
  348. [ 1.639497@3] changed the (2) buffer size from 0 to 262144
  349. [ 1.639906@3] init vdec memsource 7a00000->b9fffff
  350. [ 1.640238@3] [tsync_pcr_init]init success.
  351. [ 1.640396@3] regist mpeg12 codec profile
  352. [ 1.640543@3] regist mpeg4 codec profile
  353. [ 1.640546@3] amvdec_vc1 module init
  354. [ 1.640687@3] regist vc1 codec profile
  355. [ 1.640690@3] amvdec_h264 module init
  356. [ 1.640878@3] regist h264 codec profile
  357. [ 1.640880@3] amvdec_h264mvc module init
  358. [ 1.641028@3] regist hmvc codec profile
  359. [ 1.641030@3] amvdec_h265 module init
  360. [ 1.641181@3] regist hevc codec profile
  361. [ 1.641328@3] regist mjpeg codec profile
  362. [ 1.641330@3] amvdec_real module init
  363. [ 1.641473@3] regist real codec profile
  364. [ 1.641476@3] amvdec_avs module init
  365. [ 1.642062@3] alloc_keep_buffer keep_y_addr ee200000
  366. [ 1.642082@3] alloc_keep_buffer keep_u_addr ee800000
  367. [ 1.642094@3] alloc_keep_buffer keep_v_addr ee900000
  368. [ 1.642099@3] yaddr=ee200000,u_addr=ee800000,v_addr=ee900000
  369. [ 1.642678@3] create_ge2d_work_queue video task ok
  370. [ 1.643433@3] efuse===========================================
  371. [ 1.643780@3] efuse: device efuse created
  372. [ 1.643934@3] efuse--------------------------------------------
  373. [ 1.643937@3] SARADC Driver init.
  374. [ 1.644170@3] __saradc_probe__
  375. [ 1.485149@1] 0f5054bdee0001010101010101010101010101010101662150b051001b304070
  376. [ 1.958094@1] 3600a05a0000001e011d007251d01e206e285500a05a0000001e000000fd0018
  377. [ 1.965280@1] 4b1a4417000a202020202020000000fc0053414d53554e470a20202020200143
  378. [ 1.972467@1]
  379. [ 1.974115@1] hdmitx: edid: blk1 raw data
  380. [ 1.978095@1] 020323f14b841305140312101f2021222309070783010000e2000f67030c0020
  381. [ 1.985282@1] 00b82d011d00bc52d01e20b8285540a05a0000001e011d8018711c1620582c25
  382. [ 1.992469@1] 00a05a0000009e011d80d0721c1620102c2580a05a0000009e8c0ad08a20e02d
  383. [ 1.999656@1] 10103e9600a05a000000180000000000000000000000000000000000000000cc
  384. [ 2.006842@1]
  385. [ 2.008894@2] hdmitx: edid: find IEEEOUT
  386. [ 2.012951@2] hdmitx: video: get current mode: 720p
  387. [ 2.017243@2] is_similar_hdmi_vic[326] vic_old=4,mode_new=11
  388. [ 2.022883@2] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 4
  389. [ 2.029447@2] hdmitx: audio: audio channel num is 0
  390. [ 2.034314@2] hdmitx: audio: SPDIF
  391. [ 2.037678@2] hdmitx: audio: current VIC: 4
  392. [ 2.041847@2] hdmitx: audio: audio sample rate: 0
  393. [ 2.046501@2] hdmitx: audio: reset audio N para
  394. [ 2.051012@2] hdmitx: audio: PCM out to HDMI
  395. [ 2.061865@2] Indeed it is in host mode hprt0 = 00041901
  396. [ 2.080826@3] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
  397. [ 2.080955@3] hdmitx: audio: i2s_to_spdif_flag:1
  398. [ 2.085648@3] hdmitx: audio: Enable audio spdif to HDMI
  399. [ 2.090884@3] hdmi detect: plug.
  400. [ 2.094172@0] saradc calibration: ref_val = 508
  401. [ 2.098533@0] saradc calibration: ref_nominal = 512
  402. [ 2.103430@0] saradc calibration: coef = 4120
  403. [ 2.107942@0] Remote Driver
  404. [ 2.110609@0] Remote platform_data g_remote_base=fe600580
  405. [ 2.115944@0] set drvdata completed
  406. [ 2.119411@0] device_create_file completed
  407. [ 2.124372@0] input: aml_keypad as /devices/platform/meson-remote/input/input0
  408. [ 2.131447@0] input_register_device completed
  409. [ 2.135445@0] [0xffffff00] = 0x1dd0190
  410. [ 2.139056@0] [0xffffff04] = 0xf800ca
  411. [ 2.142762@0] [0xffffff08] = 0x82006e
  412. [ 2.146330@0] [0xffffff0c] = 0x3c0030
  413. [ 2.149966@0] [0xffffff10] = 0x30fa0013
  414. [ 2.153818@0] [0xffffff18] = 0x6f19000
  415. [ 2.157500@0] [0xffffff1c] = 0xbe40
  416. [ 2.160992@0] [0x0] = 0xfa00a0
  417. [ 2.164032@0] [0x4] = 0xfa00a0
  418. [ 2.167024@0] [0x8] = 0xfa00a0
  419. [ 2.170054@0] [0xc] = 0x640030
  420. [ 2.173126@0] [0x10] = 0x30fa0013
  421. [ 2.176404@0] [0x18] = 0x961b800
  422. [ 2.179579@0] [0x1c] = 0x9740
  423. [ 2.182561@0] [0x20] = 0x104
  424. [ 2.185380@0] [0x24] = 0x0
  425. [ 2.188064@0] [0x28] = 0x0
  426. [ 2.190749@0] set_remote_mode[69]
  427. [ 2.194125@0] remote config major:240
  428. [ 2.198158@0] physical address:0x2e830000
  429. [ 2.201977@0] GPIO Keypad Driver init.
  430. [ 2.205576@0] ==gpio_key_probe==
  431. [ 2.208751@0] reg:2620,clearmask=400040,setmask=1
  432. [ 2.213437@0] reg:2622,clearmask=ff0000,set pin=3
  433. [ 2.218112@0] reg:2623,clearmask=7000000,setmask=7
  434. [ 2.222930@0] reg:2620,clearmask=800080,setmask=10001
  435. [ 2.227984@0] reg:2622,clearmask=ff000000,set pin=3
  436. [ 2.232832@0] reg:2623,clearmask=70000000,setmask=7
  437. [ 2.237808@0] power key(116) registed.
  438. [ 2.241758@0] input: gpio_keypad as /devices/platform/gpio_keypad.5/input/input1
  439. [ 2.241822@3] usb 1-1: new low-speed USB device number 2 using dwc_otg
  440. [ 2.243257@3] Indeed it is in host mode hprt0 = 00041901
  441. [ 2.260901@0] gpio keypad register input device completed.
  442. [ 2.266052@0] gpio keypad major:239
  443. [ 2.269988@0] spi_nor_init
  444. [ 2.272441@0] amlogic_spi_nor_probe:
  445. [ 2.275740@0] amlogic_spi->state_name:default
  446. [ 2.280272@0] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated
  447. [ 2.287826@0] check_storage_device : spi boot_device_flag : -1
  448. [ 2.293423@0] spi_nor_probe
  449. [ 2.296128@0] spi_nor_probe 629 boot_device_flag 2 : do not init spi
  450. [ 2.302501@0] spi_nor: probe of apollospi:32766 failed with error -12
  451. [ 2.308889@0] amlogic_spi_nor_probe over
  452. [ 2.313036@0] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  453. [ 2.322491@0] host->base fe108c20
  454. [ 2.325562@0] pdata->caps 7
  455. [ 2.328251@0] pdata->caps2 0
  456. [ 2.331111@0] get property: port, value:0x00000001
  457. [ 2.337658@0] get property: ocr_avail, value:0x00200000
  458. [ 2.344170@0] get property: f_min, value:0x000493e0
  459. [ 2.350593@0] get property: f_max, value:0x02faf080
  460. [ 2.357133@0] get property: f_max_w, value:0x02faf080
  461. [ 2.363640@0] get property: max_req_size, value:0x00020000
  462. [ 2.370075@0] get property: irq_in, value:0x00000003
  463. [ 2.376627@0] get property: irq_out, value:0x00000005
  464. [ 2.383108@0] get property: gpio_cd, str:CARD_6
  465. [ 2.389040@0] get property: pinname, str:sd
  466. [ 2.394726@0] get property: jtag_pin, str:CARD_0
  467. [ 2.400641@0] get property: card_type, value:0x00000005
  468. [ 2.407180@0] get property: gpio_dat3, str:CARD_4
  469. [ 2.447424@3] usb 1-1: New USB device found, idVendor=04f3, idProduct=0103
  470. [ 2.448685@3] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  471. [ 2.451845@2] reg:2620,clearmask=80008,setmask=10001
  472. [ 2.451852@2] reg:2621,clearmask=ff000000,set pin=49
  473. [ 2.451856@2] reg:2623,clearmask=7000,setmask=7
  474. [ 2.451861@2] reg:2620,clearmask=200020,setmask=1
  475. [ 2.451866@2] reg:2622,clearmask=ff00,set pin=49
  476. [ 2.451870@2] reg:2623,clearmask=700000,setmask=7
  477. [ 2.461888@1] pdata->caps 10f
  478. [ 2.461892@1] pdata->caps2 0
  479. [ 2.461897@1] get property: port, value:0x00000000
  480. [ 2.461902@1] get property: ocr_avail, value:0x00200000
  481. [ 2.461906@1] get property: f_min, value:0x000493e0
  482. [ 2.461910@1] get property: f_max, value:0x02faf080
  483. [ 2.461915@1] get property: max_req_size, value:0x00020000
  484. [ 2.461924@1] get property: pinname, str:sdio
  485. [ 2.461929@1] get property: card_type, value:0x00000003
  486. [ 2.539755@3] input: HID 04f3:0103 as /devices/lm1/usb1/1-1/1-1:1.0/input/input2
  487. [ 2.543016@3] hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-lm1-1/input0
  488. [ 2.560363@3] input: HID 04f3:0103 as /devices/lm1/usb1/1-1/1-1:1.1/input/input3
  489. [ 2.562782@3] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.11 Device [HID 04f3:0103] on usb-lm1-1/input1
  490. [ 2.601801@2] [aml_sdio_probe] aml_sdio_probe() success!
  491. [ 2.603206@2] host->base fe108e00
  492. [ 2.604871@2] pdata->caps 80000547
  493. [ 2.608172@2] pdata->caps2 20
  494. [ 2.611112@2] get property: port, value:0x00000005
  495. [ 2.617629@2] get property: ocr_avail, value:0x00200000
  496. [ 2.624118@2] get property: f_min, value:0x000493e0
  497. [ 2.630593@2] get property: f_max, value:0x05f5e100
  498. [ 2.637104@2] get property: max_req_size, value:0x00020000
  499. [ 2.643601@2] get property: pinname, str:emmc
  500. [ 2.649384@2] get property: card_type, value:0x00000001
  501. [ 2.655896@2] get property: gpio_dat3, str:BOOT_3
  502. [ 2.661868@2] [is_emmc_exist] host->storage_flag=2, POR_BOOT_VALUE=3
  503. [ 2.701820@1] aml_emmc_hw_reset 1338
  504. [ 2.709681@2] mmc_init_card
  505. [ 2.771793@2] [aml_sdhc_probe] aml_sdhc_probe() success!
  506. [ 2.772199@0] [dsp]DSP start addr 0xc5e00000
  507. [ 2.775805@0] [dsp]register dsp to char divece(257)
  508. [ 2.781437@0] amlogic audio spdif interface device init!
  509. [ 2.786009@0] device name=nand_key open error
  510. [ 2.790278@0] aml_keys: version 0 can not be init c07deb9c
  511. [ 2.795804@0] device name=emmc_key open error
  512. [ 2.800148@0] aml_keys: version 0 can not be init c07deb9c
  513. [ 2.806558@0] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
  514. [ 2.817092@0] amaudio2: device amaudio2 created
  515. [ 2.817405@0] Amlogic CEC Driver, (c) 2016 Gerald Dachs, Version: 0.0.1
  516. [ 2.823190@0] Error: Didn't get power valid value --- wifi_power_probe 323
  517. [ 2.829640@0] wifi_power power_gpio is 6
  518. [ 2.833538@0] wifi_power power_gpio2 is 108
  519. [ 2.838212@0] amlogic rfkill init
  520. [ 2.841002@0] enter bt_probe of_node
  521. [ 2.841019@0] not get gpio_en
  522. [ 2.843949@0] not get gpio_wake
  523. [ 2.872078@0] wifi_request_32k_clk : OFF-->ON for bt_rfkill
  524. [ 2.872152@0] clock_32k_pin(107) : (null)
  525. [ 2.876068@0] clock_32k_pin(107) : sdio_wifi
  526. [ 2.907252@2] emmc: BKOPS_EN bit is not set
  527. [ 2.908035@2] Activate high speed
  528. [ 2.920594@2] emmc: new HS200 MMC card at address 0001, clock 85000000, 8-bit-bus-width
  529. [ 2.923610@3] mmcblk0: emmc:0001 NCard 7.21 GiB
  530. [ 2.927886@3] mmcblk0boot0: emmc:0001 NCard partition 1 4.00 MiB
  531. [ 2.933965@3] mmcblk0boot1: emmc:0001 NCard partition 2 4.00 MiB
  532. [ 2.940895@3] mmcblk0: p1
  533. [ 2.943167@3] Delete invalid mbr partition part ee692600, part->partno 1
  534. [ 2.949711@3] emmc read lba=0x12000, blocks=0x1 OK!
  535. [ 2.954247@3] emmc read lba=0x12001, blocks=0x1 OK!
  536. [ 2.958847@3] [mmc_read_partition_tbl] mmc read partition OK!
  537. [ 2.964580@3] add_emmc_partition
  538. [ 2.968060@3] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
  539. [ 2.976508@3] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
  540. [ 2.984873@3] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
  541. [ 2.993278@3] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
  542. [ 3.001644@3] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
  543. [ 3.010088@3] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
  544. [ 3.018513@3] [mmcblk0p07] misc offset 0x00002d400000, size 0x000002000000
  545. [ 3.026855@3] [mmcblk0p08] boot offset 0x00002fc00000, size 0x000002000000
  546. [ 3.035312@3] [mmcblk0p09] system offset 0x000032400000, size 0x000040000000
  547. [ 3.042430@0] UMP: UMP device driver -0.90.0-17432-g61f3e1d loaded
  548. [ 3.042873@0] aml_aes aml_aes: Aml AES
  549. [ 3.043460@0] aml_tdes aml_tdes: Aml TDES
  550. [ 3.044624@0] enter rt5616_modinit
  551. [ 3.044950@0] dummy_codec_platform_probe
  552. [ 3.045320@0] == ES8323 == es8323_modinit()
  553. [ 3.046006@0] enter aml_i2s_dai_probe
  554. [ 3.046011@0] i2s get no clk src setting in dts, use the default mpll 0
  555. [ 3.046023@0] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000
  556. [ 3.046275@0] enter aml_pcm_dai_probe
  557. [ 3.046430@0] [aml-spdif-dai]enter aml_dai_spdif_init
  558. [ 3.046436@0] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4
  559. [ 3.046439@0] audio_set_958_clk, freq=4,
  560. [ 3.046449@0] IEC958 16bit
  561. [ 3.046455@0] hdmitx: audio: aout notify rate 48000
  562. [ 3.046458@0] hdmitx: audio: aout notify size 16
  563. [ 3.046462@0] hdmitx: audio: aout notify format CT_PCM
  564. [ 3.046468@0] hdmitx: audio: audio channel num is 1
  565. [ 3.046476@0] hdmitx: audio: SPDIF
  566. [ 3.046488@0] hdmitx: audio: current VIC: 4
  567. [ 3.046491@0] hdmitx: audio: audio sample rate: 3
  568. [ 3.046493@0] hdmitx: audio: reset audio N para
  569. [ 3.046505@0] hdmitx: audio: PCM out to HDMI
  570. [ 3.046508@0] hdmitx: audio: i2s_to_spdif_flag:1
  571. [ 3.046510@0] hdmitx: audio: Enable audio spdif to HDMI
  572. [ 3.046517@0] hdmitx: audio: Audio Type: PCM
  573. [ 3.046571@0] hdmitx: audio: set audio param
  574. [ 3.046651@0] [aml-spdif-dai]aml_spdif_probe
  575. [ 3.046900@0] test codec rt5616
  576. [ 3.046905@0] test_codec_of_node, node rt5616 disable
  577. [ 3.046908@0] test codec rt5631
  578. [ 3.046912@0] test_codec_of_node, node rt5631 disable
  579. [ 3.046915@0] test codec wm8960
  580. [ 3.046918@0] test_codec_of_node, node wm8960 disable
  581. [ 3.046922@0] test codec dummy_codec
  582. [ 3.046926@0] using external codec, index = 4
  583. [ 3.046929@0] using external dummy codec
  584. [ 3.047149@0] enter spdif_dit_probe
  585. [ 3.047151@0] aml_spdif_unmute
  586. [ 3.047423@0] codec_name = dummy_codec.0
  587. [ 3.047765@0] enter aml_asoc_init
  588. [ 3.047800@0] p_aml_audio->hp_disable=1
  589. [ 3.047805@0] falied to get spk event delay time paraments from dts file
  590. [ 3.047808@0] spk_event delay_time = 0
  591. [ 3.048675@0] aml-i2s 0:playback preallocate_dma_buffer: area=f0782000, addr=2e100000, size=524288
  592. [ 3.049400@0] aml-i2s 1:capture preallocate_dma_buffer: area=f04a5000, addr=2e200000, size=65536
  593. [ 3.049434@0] aml_snd_m8 aml_m8_sound_card.4: dummy_codec <-> aml-i2s-dai.0 mapping ok
  594. [ 3.050448@0] aml-i2s 0:playback preallocate_dma_buffer: area=f0804000, addr=2e300000, size=524288
  595. [ 3.051160@0] aml-i2s 1:capture preallocate_dma_buffer: area=f04c6000, addr=2e1a0000, size=65536
  596. [ 3.051193@0] aml_snd_m8 aml_m8_sound_card.4: dit-hifi <-> aml-spdif-dai.0 mapping ok
  597. [ 3.053135@0] -----ext_codec=1---
  598. [ 3.053159@0] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0
  599. [ 3.053531@1] TCP: cubic registered
  600. [ 3.054437@1] NET: Registered protocol family 10
  601. [ 3.055131@1] NET: Registered protocol family 17
  602. [ 3.055240@1] Key type dns_resolver registered
  603. [ 3.303735@0] [mmcblk0p10] data offset 0x000072c00000, size 0x00015b500000
  604. [ 3.303769@0] card key: card_blk_probe.
  605. [ 3.303777@0] emmc_key_init:428 emmc key lba_start:0x12020,lba_end:0x12220
  606. [ 3.303782@0] i=0,register --- emmc_key
  607. [ 3.303786@0] emmc key: emmc_key_init:450 ok.
  608. [ 3.303936@0] Exit aml_emmc_partition_ops OK.
  609. [ 3.303304@2] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
  610. [ 3.338771@0] mmcblk0boot1: p1
  611. [ 3.338818@0] mmcblk0boot1: p1 start 16065 is beyond EOD, truncated
  612. [ 3.340191@1] mmcblk0boot0: p1
  613. [ 3.340223@1] mmcblk0boot0: p1 start 16065 is beyond EOD, truncated
  614. [ 3.361897@2] Registering SWP/SWPB emulation handler
  615. [ 3.366485@2] enter meson_pm_init
  616. [ 3.369950@2] enter meson_pm_probe!
  617. [ 3.373265@2] meson_pm_probe done !
  618. [ 3.376742@2] AO cpu runs ok.
  619. [ 3.381303@3] regulator-dummy: disabling
  620. [ 3.384218@0] console [netcon0] enabled
  621. [ 3.387351@0] netconsole: network logging started
  622. [ 3.392251@0] AO cpu stop ok.
  623. [ 3.395349@0] AO cpu runs ok.
  624. [ 3.397948@0] aml_rtc rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
  625. [ 3.405482@0] meson_cpufreq_probe:SYSPLL request to be fixed
  626. [ 3.410926@0] meson_cpufreq: no voltage_control prop
  627. [ 3.415888@0] voltage_control = 0
  628. [ 3.419678@0] buf[0]=2f,buf[1]=b2,err=4
  629. [ 3.423009@0] adc=401,TS_C=15,flag=1
  630. [ 3.426509@0] efuse_flag=a
  631. [ 3.429175@0] amlogic_thermal_probe, this chip is trimmed, use thermal
  632. [ 3.435742@0] amlogic-thermal aml_thermal: amlogic thermal probe start
  633. [ 3.442196@0] #thermal-cells=7
  634. [ 3.445190@0] pdata->temp_trip_count=7
  635. [ 3.448916@0] temperature=60000 on trip point=0
  636. [ 3.453441@0] fixing high_freq=1536001 to 1536000 at trip point 0,level=0
  637. [ 3.460178@0] fixing low_freq=1536001 to 1536000 at trip point 0,level=0
  638. [ 3.466838@0] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
  639. [ 3.473265@0] cpu[0] core num==3
  640. [ 3.476457@0] gpu[0] core num==2
  641. [ 3.479652@0] temperature=65000 on trip point=1
  642. [ 3.484176@0] fixing high_freq=1488001 to 1250000 at trip point 1,level=1
  643. [ 3.490908@0] fixing low_freq=1488001 to 1250000 at trip point 1,level=1
  644. [ 3.497576@0] gpu[1].gpu_high_freq=426,tmp_level[1].gpu_high_freq=426
  645. [ 3.504004@0] cpu[1] core num==3
  646. [ 3.507186@0] gpu[1] core num==2
  647. [ 3.510399@0] temperature=70000 on trip point=2
  648. [ 3.514917@0] fixing high_freq=1320001 to 1250000 at trip point 2,level=1
  649. [ 3.521646@0] fixing low_freq=1320001 to 1250000 at trip point 2,level=1
  650. [ 3.528315@0] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
  651. [ 3.534743@0] cpu[2] core num==2
  652. [ 3.537925@0] gpu[2] core num==2
  653. [ 3.541129@0] temperature=75000 on trip point=3
  654. [ 3.545662@0] fixing high_freq=1200001 to 768000 at trip point 3,level=2
  655. [ 3.552319@0] fixing low_freq=1200001 to 768000 at trip point 3,level=2
  656. [ 3.558889@0] gpu[3].gpu_high_freq=328,tmp_level[3].gpu_high_freq=328
  657. [ 3.565309@0] cpu[3] core num==2
  658. [ 3.568491@0] gpu[3] core num==1
  659. [ 3.571695@0] temperature=80000 on trip point=4
  660. [ 3.576225@0] fixing high_freq=1008001 to 768000 at trip point 4,level=2
  661. [ 3.582883@0] fixing low_freq=1008001 to 768000 at trip point 4,level=2
  662. [ 3.589446@0] gpu[4].gpu_high_freq=328,tmp_level[4].gpu_high_freq=328
  663. [ 3.595881@0] cpu[4] core num==2
  664. [ 3.599056@0] gpu[4] core num==1
  665. [ 3.602280@0] temperature=90000 on trip point=5
  666. [ 3.606763@0] fixing high_freq=720001 to 384000 at trip point 5,level=3
  667. [ 3.613363@0] fixing low_freq=720001 to 384000 at trip point 5,level=3
  668. [ 3.619839@0] gpu[5].gpu_high_freq=251,tmp_level[5].gpu_high_freq=251
  669. [ 3.626274@0] cpu[5] core num==1
  670. [ 3.629449@0] gpu[5] core num==1
  671. [ 3.632672@0] temperature=260000 on trip point=6
  672. [ 3.637242@0] fixing high_freq=-1 to -22 at trip point 6,level=-1
  673. [ 3.643335@0] fixing low_freq=-1 to -22 at trip point 6,level=-1
  674. [ 3.649279@0] gpu[6].gpu_high_freq=-1,tmp_level[6].gpu_high_freq=-1
  675. [ 3.655533@0] cpu[6] core num==-1
  676. [ 3.658811@0] gpu[6] core num==-1
  677. [ 3.662115@0] idle interval=1000
  678. [ 3.665298@0] pdata->name:aml_thermal
  679. [ 3.669378@0] tmp_trip[0].cpu_core_upper=1
  680. [ 3.673050@0] tmp_trip[1].cpu_core_upper=1
  681. [ 3.677094@0] tmp_trip[2].cpu_core_upper=2
  682. [ 3.681150@0] tmp_trip[3].cpu_core_upper=2
  683. [ 3.685253@0] tmp_trip[4].cpu_core_upper=2
  684. [ 3.689290@0] tmp_trip[5].cpu_core_upper=3
  685. [ 3.693392@0] tmp_trip[6].cpu_core_upper=-1
  686. [ 3.697517@0] aml_thermal bind thermal-cpucore-0 okay !
  687. [ 3.702783@0] aml_thermal bind thermal-cpufreq-0 okay !
  688. [ 3.708040@0] amlogic: Kernel Thermal management registered
  689. [ 3.713470@0] amlogic-thermal aml_thermal: amlogic thermal probe done
  690. [ 3.720014@0] ALSA device list:
  691. [ 3.722998@0] #0: AML-M8AUDIO
  692. [ 3.726396@0] Freeing unused kernel memory: 180K (c076b000 - c0798000)
  693. [ 3.763994@1] tvmode set to 720p
  694. [ 3.763994@1]
  695. [ 3.764015@1] don't set the same mode as current.
  696. [ 3.841541@1] vfm_map_store:rm default
  697. [ 3.841541@1]
  698. [ 3.841648@1] vfm_map_store:add default decoder ppmgr deinterlace amvideo
  699. [ 3.841648@1]
  700. [ 3.874541@1] Console: switching to colour frame buffer device 160x45
  701. [ 4.026848@1] force enable DISCARD here for ext4 fs
  702. [ 4.026864@1] EXT4-fs (mmcblk0p9): couldn't mount as ext3 due to feature incompatibilities
  703. [ 4.027217@1] force enable DISCARD here for ext4 fs
  704. [ 4.027228@1] EXT4-fs (mmcblk0p9): couldn't mount as ext2 due to feature incompatibilities
  705. [ 4.027541@1] force enable DISCARD here for ext4 fs
  706. [ 4.031703@2] checked enable EXT4 DISCARD here
  707. [ 4.031716@2] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
  708. [ 4.187575@1] force enable DISCARD here for ext4 fs
  709. [ 4.187590@1] EXT4-fs (mmcblk0p10): couldn't mount as ext3 due to feature incompatibilities
  710. [ 4.187962@1] force enable DISCARD here for ext4 fs
  711. [ 4.187972@1] EXT4-fs (mmcblk0p10): couldn't mount as ext2 due to feature incompatibilities
  712. [ 4.188292@1] force enable DISCARD here for ext4 fs
  713. [ 4.193166@2] checked enable EXT4 DISCARD here
  714. [ 4.193179@2] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
  715. [ 4.392927@3] systemd[1]: System time before build time, advancing clock.
  716. [ 4.404352@0] systemd[1]: systemd 229 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  717. [ 4.404743@0] systemd[1]: Detected architecture arm.
  718. [ 4.404968@0] systemd[1]: Running with unpopulated /etc.
  719. [ 4.405167@0] systemd[1]: Set hostname to <LibreELEC>.
  720. [ 4.405335@0] systemd[1]: Cannot open /etc/machine-id: No such file or directory
  721. [ 4.467658@0] systemd[1]: Populated /etc with preset unit settings.
  722. [ 4.536852@0] systemd[1]: Created slice User and Session Slice.
  723. [ 4.537238@0] systemd[1]: Listening on udev Control Socket.
  724. [ 4.537480@0] systemd[1]: Listening on Journal Socket.
  725. [ 4.537706@0] systemd[1]: Created slice System Slice.
  726. [ 4.539235@0] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  727. [ 4.540638@0] systemd[1]: Mounting Debug File System...
  728. [ 4.543231@0] systemd[1]: Starting Remount Root and Kernel File Systems...
  729. [ 4.544997@0] systemd[1]: Mounting Variable Directory...
  730. [ 4.546888@0] systemd[1]: Mounting POSIX Message Queue File System...
  731. [ 4.549026@0] systemd[1]: Mounting Temporary Directory...
  732. [ 4.550724@0] systemd[1]: Starting Setup machine-id...
  733. [ 4.551339@0] systemd[1]: Listening on Journal Socket (/dev/log).
  734. [ 4.553800@0] systemd[1]: Starting Mounting swapfile...
  735. [ 4.554235@0] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  736. [ 4.555332@0] systemd[1]: Listening on udev Kernel Socket.
  737. [ 4.564721@1] systemd[1]: Starting Load Kernel Modules...
  738. [ 4.565406@1] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  739. [ 4.565511@1] systemd[1]: Reached target Paths.
  740. [ 4.568446@1] systemd[1]: Starting Show Version...
  741. [ 4.568570@1] systemd[1]: Reached target Slices.
  742. [ 4.568893@1] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  743. [ 4.570512@1] systemd[1]: Started Create list of required static device nodes for the current kernel.
  744. [ 4.571132@1] systemd[1]: Started Remount Root and Kernel File Systems.
  745. [ 4.574080@1] systemd[1]: Starting udev Coldplug all Devices...
  746. [ 4.575632@1] systemd[1]: Starting Create Static Device Nodes in /dev...
  747. [ 4.597808@0] systemd[1]: Mounted Debug File System.
  748. [ 4.598089@0] systemd[1]: Mounted POSIX Message Queue File System.
  749. [ 4.598288@0] systemd[1]: Mounted Variable Directory.
  750. [ 4.600755@0] systemd[1]: Starting Setup Timezone data...
  751. [ 4.625068@2] systemd[1]: Mounted Temporary Directory.
  752. [ 4.628399@2] systemd[1]: Started Show Version.
  753. [ 4.629295@2] systemd[1]: systemd-tmpfiles-setup-dev.service: Main process exited, code=exited, status=1/FAILURE
  754. [ 4.632112@2] systemd[1]: Failed to start Create Static Device Nodes in /dev.
  755. [ 4.632973@2] systemd[1]: systemd-tmpfiles-setup-dev.service: Unit entered failed state.
  756. [ 4.633032@2] systemd[1]: systemd-tmpfiles-setup-dev.service: Failed with result 'exit-code'.
  757. [ 4.650086@2] systemd[1]: Started Setup Timezone data.
  758. [ 4.656337@1] pdata->tmp_trip[0].gpu_lower_level=1
  759. [ 4.656348@1] pdata->tmp_trip[0].gpu_upper_level=1
  760. [ 4.656369@1] pdata->tmp_trip[1].gpu_lower_level=2
  761. [ 4.656375@1] pdata->tmp_trip[1].gpu_upper_level=2
  762. [ 4.656387@1] pdata->tmp_trip[2].gpu_lower_level=4
  763. [ 4.656392@1] pdata->tmp_trip[2].gpu_upper_level=4
  764. [ 4.656413@1] pdata->tmp_trip[3].gpu_lower_level=4
  765. [ 4.656418@1] pdata->tmp_trip[3].gpu_upper_level=4
  766. [ 4.656431@1] pdata->tmp_trip[4].gpu_lower_level=4
  767. [ 4.656435@1] pdata->tmp_trip[4].gpu_upper_level=4
  768. [ 4.656448@1] pdata->tmp_trip[5].gpu_lower_level=4
  769. [ 4.656452@1] pdata->tmp_trip[5].gpu_upper_level=4
  770. [ 4.656464@1] pdata->tmp_trip[6].gpu_lower_level=-1
  771. [ 4.656468@1] pdata->tmp_trip[6].gpu_upper_level=-1
  772. [ 4.656481@1] aml_thermal bind thermal-gpufreq-0 okay !
  773. [ 4.656487@1] gpu cooling register okay with err=0
  774. [ 4.663534@1] tmp_trip[0].gpu_core_upper=0
  775. [ 4.663575@1] tmp_trip[1].gpu_core_upper=0
  776. [ 4.663588@1] tmp_trip[2].gpu_core_upper=0
  777. [ 4.663600@1] tmp_trip[3].gpu_core_upper=1
  778. [ 4.663612@1] tmp_trip[4].gpu_core_upper=1
  779. [ 4.663625@1] tmp_trip[5].gpu_core_upper=1
  780. [ 4.663636@1] tmp_trip[6].gpu_core_upper=-1
  781. [ 4.663653@1] aml_thermal bind thermal-gpucore-0 okay !
  782. [ 4.663659@1] gpu core cooling register okay with err=0
  783. [ 4.681963@0] Mali: Mali device driver loaded
  784. [ 4.687173@1] systemd[1]: Started Setup machine-id.
  785. [ 4.688438@1] systemd[1]: Started Load Kernel Modules.
  786. [ 4.689764@1] systemd[1]: Started Mounting swapfile.
  787. [ 4.861332@1] systemd[1]: Started udev Coldplug all Devices.
  788. [ 4.927379@1] systemd[1]: Reached target Swap.
  789. [ 4.929350@1] systemd[1]: Starting Apply Kernel Variables...
  790. [ 4.931538@1] systemd[1]: Starting Journal Service...
  791. [ 4.932068@1] systemd[1]: Reached target Local File Systems (Pre).
  792. [ 4.932723@1] systemd[1]: Reached target Local File Systems.
  793. [ 4.938394@2] systemd[1]: Started Apply Kernel Variables.
  794. [ 5.034731@2] systemd[1]: Started Journal Service.
  795. [ 5.061572@1] systemd-journald[1699]: Received request to flush runtime journal from PID 1
  796. [ 5.996311@2] Console: switching to colour dummy device 80x30
  797. [ 6.032432@2] wifi_setup_dt
  798. [ 6.032456@2] wifi_request_32k_clk : ON-->ON for sdio_wifi
  799. [ 6.032463@2] interrupt_pin(118) : (null)
  800. [ 6.032490@2] reg:2620,clearmask=100010,setmask=0
  801. [ 6.032496@2] reg:2622,clearmask=ff,set pin=118
  802. [ 6.032501@2] reg:2623,clearmask=70000,setmask=4
  803. [ 6.032507@2] interrupt_pin(118) : sdio_wifi
  804. [ 6.032512@2] power_on_pin(6) : (null)
  805. [ 6.032525@2] power_on_pin(6) : sdio_wifi
  806. [ 6.032530@2] power_on_pin2(108) : (null)
  807. [ 6.032541@2] power_on_pin2(108) : sdio_wifi
  808. [ 6.343466@2] WIFI Disable! 6
  809. [ 6.355666@0] AO cpu stop ok.
  810. [ 6.356067@0] AO cpu runs ok.
  811. [ 7.859929@3] IEC958 16bit
  812. [ 7.859944@3] hdmitx: audio: aout notify rate 48000
  813. [ 7.859950@3] hdmitx: audio: aout notify size 16
  814. [ 7.859955@3] hdmitx: audio: no update
  815. [ 7.859962@3] aml_i2s_close device type 8
  816. [ 7.884320@3] IEC958 16bit
  817. [ 7.884339@3] hdmitx: audio: aout notify rate 48000
  818. [ 7.884345@3] hdmitx: audio: aout notify size 16
  819. [ 7.884349@3] hdmitx: audio: no update
  820. [ 7.884356@3] aml_i2s_close device type 2
  821. [ 7.980965@2] buf=0
  822. [ 7.980978@2] IEC958_mode_raw=0
  823. [ 7.981019@2] IEC958_mode_codec= 0,IEC958 type 2 CH PCM
  824. [ 7.981025@2] last mode 0,now 0
  825. [ 7.987265@2] ----aml_hw_iec958_init,runtime->rate=44100--
  826. [ 7.987281@2] [aml-spdif-dai]enterd aml_hw_iec958_init,set_clock:4,sample_rate=5
  827. [ 7.987287@2] audio_set_958_clk, freq=5,
  828. [ 7.987293@2] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
  829. [ 7.987299@2] iec958 mode PCM16
  830. [ 7.987306@2] IEC958 16bit
  831. [ 7.987313@2] hdmitx: audio: aout notify rate 44100
  832. [ 7.987318@2] hdmitx: audio: aout notify size 16
  833. [ 7.987325@2] hdmitx: audio: audio channel num is 1
  834. [ 7.987334@2] hdmitx: audio: SPDIF
  835. [ 7.987345@2] hdmitx: audio: current VIC: 4
  836. [ 7.987349@2] hdmitx: audio: audio sample rate: 2
  837. [ 7.987354@2] hdmitx: audio: reset audio N para
  838. [ 7.987365@2] hdmitx: audio: PCM out to HDMI
  839. [ 7.987369@2] hdmitx: audio: i2s_to_spdif_flag:1
  840. [ 7.987373@2] hdmitx: audio: Enable audio spdif to HDMI
  841. [ 7.987380@2] hdmitx: audio: Audio Type: PCM
  842. [ 7.987423@2] hdmitx: audio: set audio param
  843. [ 7.987429@2] [aml-spdif-dai]spdif dma f0804000,phy addr 2e300000
  844. [ 7.987727@2] ----aml_hw_iec958_init,runtime->rate=44100--
  845. [ 7.987736@2] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
  846. [ 7.987742@2] iec958 mode PCM16
  847. [ 7.987748@2] IEC958 16bit
  848. [ 7.987753@2] hdmitx: audio: aout notify rate 44100
  849. [ 7.987758@2] hdmitx: audio: aout notify size 16
  850. [ 7.987762@2] hdmitx: audio: no update
  851. [ 7.987767@2] [aml-spdif-dai]spdif dma f0804000,phy addr 2e300000
  852. [ 7.994658@2] [aml-spdif-dai]aiu 958 playback enable
  853. [ 8.358086@1] Triggered SDIO WiFi power on and bus rescan.
  854. [ 8.358105@1] WIFI Enable! 6
  855. [ 9.087484@3] hdmitx: cec: Set PWM_E out put RTC 32K!
  856. [ 9.087501@3] hdmitx: cec: enable:int mask:0x6
  857. [ 9.088370@3] hdmitx: cec: enable:int mask:0x6
  858. [ 9.533542@0] [amlogic] ##### cec write error! #####
  859. [ 9.711454@0] [amlogic] ##### cec write error! #####
  860. [ 10.627811@0] [amlogic] ##### cec write error! #####
  861. [ 9.662775@2] [aml_sdio_timeout] time_start_cnt:1000
  862. [ 9.662775@2] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f003f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
  863. [ 9.662775@2] 
  864. [ 10.661856@2] [aml_sdio_timeout] time_start_cnt:998
  865. [ 10.661856@2] <3>[ 10.778226@2] [amlogic] ##### cec write error! #####
  866. [ 10.661898@3] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f003f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
  867. [ 10.661898@3] [aml_sdio_timeout] time_start_cnt:996
  868. [ 10.661898@3] [aml_sdio_print_err] sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f001f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
  869. [ 10.661898@3] 
  870. [ 11.668277@3] [aml_sdio_irq_thread] Warning: xfer_step=13
  871. [ 11.668277@3] <6>[ 11.674442@1] sdio: new high speed SDIO card at address 0001, clock 39843750, 4-bit-bus-width
  872. [ 11.677713@2] [sdio_reinit] finish
  873. [ 11.687499@3] AO cpu stop ok.
  874. [ 11.687883@3] AO cpu runs ok.
  875. [ 11.688179@3] AO cpu stop ok.
  876. [ 11.688557@3] AO cpu runs ok.
  877. [ 11.714590@3] cfg80211: Calling CRDA to update world regulatory domain
  878. [ 11.714982@3] cfg80211: World regulatory domain updated:
  879. [ 11.715004@3] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  880. [ 11.715013@3] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (2000 mBi, 0 mBm)
  881. [ 11.715019@3] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (2000 mBi, 0 mBm)
  882. [ 11.715025@3] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (2000 mBi, 0 mBm)
  883. [ 11.715033@3] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
  884. [ 11.715039@3] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
  885. [ 11.715045@3] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (2000 mBi, 0 mBm)
  886. [ 11.715052@3] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
  887. [ 11.715058@3] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  888. [ 11.806025@1] RTL871X: module init start
  889. [ 11.806030@1] RTL871X: rtl8723bs v4.3.16_13854.20150410_BTCOEX20150119-5844
  890. [ 11.806032@1] RTL871X: rtl8723bs BT-Coex version = BTCOEX20150119-5844
  891. [ 11.806033@1] wifi_setup_dt
  892. [ 11.806036@1] wifi_request_32k_clk : ON-->ON for sdio_wifi
  893. [ 11.806040@1] interrupt_pin(118) : sdio_wifi
  894. [ 11.806044@1] sdio_wifi is using the pin GPIOX_21
  895. [ 11.806047@1] wifi_dt : gpio op failed(-16) at line 210
  896. [ 11.806056@1] reg:2620,clearmask=100010,setmask=0
  897. [ 11.806059@1] reg:2622,clearmask=ff,set pin=118
  898. [ 11.806061@1] reg:2623,clearmask=70000,setmask=4
  899. [ 11.806063@1] interrupt_pin(118) : sdio_wifi
  900. [ 11.806065@1] power_on_pin(6) : sdio_wifi
  901. [ 11.806067@1] sdio_wifi is using the pin GPIOAO_6
  902. [ 11.806069@1] wifi_dt : gpio op failed(-16) at line 232
  903. [ 11.806073@1] power_on_pin(6) : sdio_wifi
  904. [ 11.806075@1] power_on_pin2(108) : sdio_wifi
  905. [ 11.806077@1] sdio_wifi is using the pin GPIOX_11
  906. [ 11.806079@1] wifi_dt : gpio op failed(-16) at line 244
  907. [ 11.806081@1] power_on_pin2(108) : sdio_wifi
  908. [ 11.806084@1] ######platform_wifi_power_on:
  909. [ 11.806087@1] WIFI Disable! 6
  910. [ 12.311850@1] WIFI Enable! 6
  911. [ 12.791793@2] [amlogic] ##### cec write error! #####
  912. [ 12.793008@2] hdmitx: cec: hw reset :logical addr:0x14
  913. [ 12.822094@2] sdio_reset_comm():
  914. [ 12.979491@2] [amlogic] ##### cec write error! #####
  915. [ 13.157984@0] [amlogic] ##### cec write error! #####
  916. [ 13.335575@0] [amlogic] ##### cec write error! #####
  917. [ 13.513688@0] [amlogic] ##### cec write error! #####
  918. [ 13.690895@0] [amlogic] ##### cec write error! #####
  919. [ 13.868741@0] [amlogic] ##### cec write error! #####
  920. [ 14.046342@0] [amlogic] ##### cec write error! #####
  921. [ 14.224078@0] [amlogic] ##### cec write error! #####
  922. [ 14.401143@1] [amlogic] ##### cec write error! #####
  923. [ 14.587175@0] [amlogic] ##### cec write error! #####
  924. [ 14.764891@0] [amlogic] ##### cec write error! #####
  925. [ 13.821879@3] [aml_sdio_timeout] time_start_cnt:999
  926. [ 13.821879@3] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f003f00, conf->cmd_clk_divide=1, pdata->clkc=1, conf->bus_width=1, pdata->width=1, conf=0x41727001, clock=39843750
  927. [ 13.821879@3] 
  928. [ 14.821982@3] [aml_sdio_timeout] time_start_cnt:999
  929. [ 14.821982@3] [sdio_reinit] finish
  930. [ 14.942787@0] [amlogic] ##### cec write error! #####
  931. [ 15.120304@0] [amlogic] ##### cec write error! #####
  932. [ 15.148543@2] RTL871X: rtw_ndev_init(wlan0)
  933. [ 15.161459@2] RTL871X: module init ret=0
  934. [ 15.221930@0] Changing uart_b_ttyS2: baud from 0 to 115200
  935. [ 15.297268@1] [amlogic] ##### cec write error! #####
  936. [ 15.391851@0] Changing uart_b_ttyS2: baud from 115200 to 1500000
  937. [ 15.475943@1] [amlogic] ##### cec write error! #####
  938. [ 15.656653@0] [amlogic] ##### cec write error! #####
  939. [ 15.834375@0] [amlogic] ##### cec write error! #####
  940. [ 16.011436@2] [amlogic] ##### cec write error! #####
  941. [ 16.021855@0] Changing uart_b_ttyS2: baud from 1500000 to 115200
  942. [ 16.056723@2] Bluetooth: Core ver 2.16
  943. [ 16.059551@0] NET: Registered protocol family 31
  944. [ 16.059566@0] Bluetooth: HCI device and connection manager initialized
  945. [ 16.059600@0] Bluetooth: HCI socket layer initialized
  946. [ 16.059616@0] Bluetooth: L2CAP socket layer initialized
  947. [ 16.059646@0] Bluetooth: SCO socket layer initialized
  948. [ 16.063977@2] Bluetooth: HCI UART driver ver 2.2
  949. [ 16.063999@2] Bluetooth: HCI H4 protocol initialized
  950. [ 16.064007@2] Bluetooth: HCI Realtek H5 protocol initialized
  951. [ 16.064012@2] rtk_btcoex: rtk_uart_coex_init, version: 1.1
  952. [ 16.064018@2] rtk_btcoex: create workqueue
  953. [ 16.064757@2] Bluetooth: h5_open
  954. [ 16.064772@2] Bluetooth: hci_uart_register_dev
  955. [ 16.070760@1] rtk_btcoex: create udpsocket, connect_port: 30001
  956. [ 16.070805@1] rtk_btcoex: send msg INVITE_REQ with len:11
  957. [ 16.081812@1] Changing uart_b_ttyS2: baud from 115200 to 1500000
  958. [ 16.189170@2] [amlogic] ##### cec write error! #####
  959. [ 16.367562@0] [amlogic] ##### cec write error! #####
  960. [ 16.382854@0] rtk_btcoex: uart_coex_info.hci_reversion = 1e3d
  961. [ 16.382866@0] rtk_btcoex: uart_coex_info.lmp_subversion = 5f61
  962. [ 16.449890@1] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  963. [ 16.545295@0] [amlogic] ##### cec write error! #####
  964. [ 16.655735@1] RTL871X: nolinked power save enter
  965. [ 16.723054@0] [amlogic] ##### cec write error! #####
  966. [ 16.900753@0] [amlogic] ##### cec write error! #####
  967. [ 18.401973@3] rtk_btcoex: release udp socket
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!