Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000 / 01-01 00:00:00.000] Booting Linux on physical CPU 0
- [ 0.000000 / 01-01 00:00:00.000] Initializing cgroup subsys cpu
- [ 0.000000 / 01-01 00:00:00.000] Linux version 3.4.0-perf-g3291fd6-00001-g060ad29 (lgmobile@LGEARND12B2) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Fri Jun 6 02:25:37 KST 2014
- [ 0.000000 / 01-01 00:00:00.000] CPU: ARMv7 Processor [512f06f1] revision 1 (ARMv7), cr=10c5387d
- [ 0.000000 / 01-01 00:00:00.000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- [ 0.000000 / 01-01 00:00:00.000] Machine: Qualcomm MSM 8974 (Flattened Device Tree), model: Qualcomm MSM 8974 AC G3 GLOBAL COM
- [ 0.000000 / 01-01 00:00:00.000] qcom,ion-heap@28 reserved EBI1 size 614000
- [ 0.000000 / 01-01 00:00:00.000] qcom,mdss_fb_primary reserved EBI1 size 1c20000
- [ 0.000000 / 01-01 00:00:00.000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-5000000
- [ 0.000000 / 01-01 00:00:00.000] qcom,msm-rtb reserved EBI1 size 100000
- [ 0.000000 / 01-01 00:00:00.000] qcom,msm-contig-mem reserved EBI1 size 280000
- [ 0.000000 / 01-01 00:00:00.000] Node qcom,msm-mem-hole removed memory 5a00000-d700000
- [ 0.000000 / 01-01 00:00:00.000] Node qcom,msm-mem-hole removed memory fa00000-ff00000
- [ 0.000000 / 01-01 00:00:00.000] memory pool 3 (start 0xdda00000 size 2600000) initialized
- [ 0.000000 / 01-01 00:00:00.000] PERSIST RAM CONSOLE START ADDR : 0xdd900000
- [ 0.000000 / 01-01 00:00:00.000] Initialized persistent memory from dd900000-dd9fffff
- [ 0.000000 / 01-01 00:00:00.000] cma: CMA: reserved 16 MiB at 20800000
- [ 0.000000 / 01-01 00:00:00.000] cma: Found secure_region, memory base 0, size 252 MiB
- [ 0.000000 / 01-01 00:00:00.000] cma: CMA: reserved 252 MiB at cdc00000
- [ 0.000000 / 01-01 00:00:00.000] cma: Found adsp_region, memory base 0, size 63 MiB
- [ 0.000000 / 01-01 00:00:00.000] cma: CMA: reserved 64 MiB at c9c00000
- [ 0.000000 / 01-01 00:00:00.000] cma: Found qsecom_region, memory base 0, size 17 MiB
- [ 0.000000 / 01-01 00:00:00.000] cma: CMA: reserved 20 MiB at c8800000
- [ 0.000000 / 01-01 00:00:00.000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000 / 01-01 00:00:00.000] IMEM DT static mapping successful
- [ 0.000000 / 01-01 00:00:00.000] PERCPU: Embedded 9 pages/cpu @cf35e000 s15936 r8192 d12736 u36864
- [ 0.000000 / 01-01 00:00:00.000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 736256
- [ 0.000000 / 01-01 00:00:00.000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=g3 user_debug=31 msm_rtb.filter=0x0 androidboot.emmc=true androidboot.serialno=LGD855ad14c030 gpt lge.signed_image=true androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_lgit_sic_mipi0_video:1:qcom,mdss_dsi_lgit_sic_mipi1_video uart_console lge.rev=rev_10 model.name=LG-D855 lge.bootreason=0x0 lge.hreset=off androidboot.laf androidboot.dlcomplete=0 androidboot.mode gpt lge.kcal batt.soc=66 androidboot.lge.lcdbreak_mode lge.bnr maxcpus=4 kswitch vmalloc=600m
- [ 0.000000 / 01-01 00:00:00.000] BOARD : LGE rev_10
- [ 0.000000 / 01-01 00:00:00.000] LGE REBOOT REASON: 0
- [ 0.000000 / 01-01 00:00:00.000] androidboot.dlcomplete = 0
- [ 0.000000 / 01-01 00:00:00.000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000 / 01-01 00:00:00.000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000 / 01-01 00:00:00.000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000 / 01-01 00:00:00.000] Memory: 90MB 35MB 1281MB 1498MB = 2904MB total
- [ 0.000000 / 01-01 00:00:00.000] Memory: 2529788k/2529788k available, 482820k reserved, 2210816K highmem
- [ 0.000000 / 01-01 00:00:00.000] Virtual kernel memory layout:
- [ 0.000000 / 01-01 00:00:00.000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000 / 01-01 00:00:00.000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000 / 01-01 00:00:00.000] vmalloc : 0xe2000000 - 0xff000000 ( 464 MB)
- [ 0.000000 / 01-01 00:00:00.000] lowmem : 0xcff00000 - 0xe1a00000 ( 283 MB)
- [ 0.000000 / 01-01 00:00:00.000] vmalloc : 0xcfa00000 - 0xcff00000 ( 5 MB)
- [ 0.000000 / 01-01 00:00:00.000] lowmem : 0xcd700000 - 0xcfa00000 ( 35 MB)
- [ 0.000000 / 01-01 00:00:00.000] vmalloc : 0xc5a00000 - 0xcd700000 ( 125 MB)
- [ 0.000000 / 01-01 00:00:00.000] lowmem : 0xc0000000 - 0xc5a00000 ( 90 MB)
- [ 0.000000 / 01-01 00:00:00.000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000 / 01-01 00:00:00.000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000 / 01-01 00:00:00.000] .text : 0xc0008000 - 0xc1068274 (16769 kB)
- [ 0.000000 / 01-01 00:00:00.000] .init : 0xc1100000 - 0xc120de40 (1080 kB)
- [ 0.000000 / 01-01 00:00:00.000] .data : 0xc120e000 - 0xc1326a28 (1123 kB)
- [ 0.000000 / 01-01 00:00:00.000] .bss : 0xc1326a4c - 0xc17094fc (3979 kB)
- [ 0.000000 / 01-01 00:00:00.000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000 / 01-01 00:00:00.000] Preemptible hierarchical RCU implementation.
- [ 0.000000 / 01-01 00:00:00.000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000 / 01-01 00:00:00.000] Dump stacks of tasks blocking RCU-preempt GP.
- [ 0.000000 / 01-01 00:00:00.000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000 / 01-01 00:00:00.000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
- [ 0.000000 / 01-01 00:00:00.000] Switching to timer-based delay loop
- [ 0.000000 / 01-01 00:00:00.000] Console: colour dummy device 80x30
- [ 0.000081 / 01-01 00:00:00.000] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- [ 0.000102 / 01-01 00:00:00.000] pid_max: default: 32768 minimum: 301
- [ 0.000236 / 01-01 00:00:00.000] Security Framework initialized
- [ 0.000264 / 01-01 00:00:00.000] SELinux: Initializing.
- [ 0.000354 / 01-01 00:00:00.000] Mount-cache hash table entries: 512
- [ 0.001073 / 01-01 00:00:00.000] Initializing cgroup subsys debug
- [ 0.001088 / 01-01 00:00:00.000] Initializing cgroup subsys cpuacct
- [ 0.001100 / 01-01 00:00:00.000] Initializing cgroup subsys freezer
- [ 0.001112 / 01-01 00:00:00.000] Initializing cgroup subsys net_cls
- [ 0.001151 / 01-01 00:00:00.000] CPU: Testing write buffer coherency: ok
- [ 0.001320 / 01-01 00:00:00.000] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.001433 / 01-01 00:00:00.000] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
- [ 0.004238 / 01-01 00:00:00.000] Setting up static identity map for 0xadb840 - 0xadb8c8
- [ 0.004254 / 01-01 00:00:00.000] MSM Memory Dump table set up
- [ 0.005587 / 01-01 00:00:00.000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.006336 / 01-01 00:00:00.000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.007082 / 01-01 00:00:00.000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.007167 / 01-01 00:00:00.000] Brought up 4 CPUs
- [ 0.007184 / 01-01 00:00:00.000] SMP: Total of 4 processors activated (153.60 BogoMIPS).
- [ 0.018547 / 01-01 00:00:00.010] dummy:
- [ 0.034044 / 01-01 00:00:00.030] NET: Registered protocol family 16
- [ 0.036961 / 01-01 00:00:00.030] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.039140 / 01-01 00:00:00.030] KPI: Bootloader start count = 2956929293
- [ 0.039153 / 01-01 00:00:00.030] KPI: Bootloader end count = 872779169
- [ 0.039164 / 01-01 00:00:00.030] KPI: Bootloader display count = 1891958728
- [ 0.039176 / 01-01 00:00:00.030] KPI: Bootloader load kernel count = 2568016208
- [ 0.039188 / 01-01 00:00:00.030] KPI: Kernel MPM timestamp = 126153
- [ 0.039199 / 01-01 00:00:00.030] KPI: Kernel MPM Clock frequency = 32768
- [ 0.039212 / 01-01 00:00:00.030] socinfo_print: Unknown format found
- [ 0.039434 / 01-01 00:00:00.030] msm_8974_init_gpiomux:2466 socinfo_get_version 10001
- [ 0.039498 / 01-01 00:00:00.030] kilo: board_revno =10
- [ 0.053453 / 01-01 00:00:00.050] gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
- [ 0.068370 / 01-01 00:00:00.060] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
- [ 0.086932 / 01-01 00:00:00.080] 8841_s1: 675 <--> 1050 mV at 0 mV normal idle
- [ 0.087317 / 01-01 00:00:00.080] 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle
- [ 0.087694 / 01-01 00:00:00.080] 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle
- [ 0.088106 / 01-01 00:00:00.080] 8841_s2: 500 <--> 1050 mV at 0 mV normal idle
- [ 0.088480 / 01-01 00:00:00.080] 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.088864 / 01-01 00:00:00.080] 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- [ 0.089241 / 01-01 00:00:00.080] 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.089652 / 01-01 00:00:00.080] 8841_s3: 1050 mV normal idle
- [ 0.090059 / 01-01 00:00:00.080] 8841_s4: 815 <--> 900 mV at 0 mV normal idle
- [ 0.090429 / 01-01 00:00:00.080] 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.090806 / 01-01 00:00:00.080] 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.091189 / 01-01 00:00:00.080] 8941_s1: 1300 mV normal idle
- [ 0.091616 / 01-01 00:00:00.090] 8941_s2: 2150 mV normal idle
- [ 0.092004 / 01-01 00:00:00.090] 8941_s3: 1800 mV normal idle
- [ 0.092417 / 01-01 00:00:00.090] 8941_l1: 1225 mV normal idle
- [ 0.092801 / 01-01 00:00:00.090] 8941_l2: 1200 mV normal idle
- [ 0.093203 / 01-01 00:00:00.090] 8941_l3: 1000 <--> 1200 mV at 1000 mV normal idle
- [ 0.093596 / 01-01 00:00:00.090] 8941_l4: 1225 mV normal idle
- [ 0.093989 / 01-01 00:00:00.090] 8941_l5: 1800 mV normal idle
- [ 0.094378 / 01-01 00:00:00.090] 8941_l6: 1800 mV normal idle
- [ 0.094776 / 01-01 00:00:00.090] 8941_l7: 1800 mV normal idle
- [ 0.095159 / 01-01 00:00:00.090] 8941_l8: 1800 mV normal idle
- [ 0.095566 / 01-01 00:00:00.090] 8941_l9: 1800 <--> 2950 mV at 2950 mV normal idle
- [ 0.095972 / 01-01 00:00:00.090] 8941_l10: 1800 <--> 2950 mV at 2950 mV normal idle
- [ 0.096371 / 01-01 00:00:00.090] 8941_l11: 1000 <--> 1300 mV at 1000 mV normal idle
- [ 0.096773 / 01-01 00:00:00.090] 8941_l12: 1800 mV normal idle
- [ 0.097131 / 01-01 00:00:00.090] 8941_l12_ao: 1800 mV normal idle
- [ 0.097536 / 01-01 00:00:00.090] 8941_l13: 1800 <--> 2950 mV at 2950 mV normal idle
- [ 0.097930 / 01-01 00:00:00.090] 8941_l14: 1800 mV normal idle
- [ 0.098341 / 01-01 00:00:00.090] 8941_l15: 2050 mV normal idle
- [ 0.098746 / 01-01 00:00:00.090] 8941_l16: 2700 mV normal idle
- [ 0.099150 / 01-01 00:00:00.090] 8941_l17: 2850 mV normal idle
- [ 0.099551 / 01-01 00:00:00.090] 8941_l18: 2700 mV normal idle
- [ 0.099957 / 01-01 00:00:00.090] 8941_l19: 3000 <--> 3300 mV at 3000 mV normal idle
- [ 0.100376 / 01-01 00:00:00.090] 8941_l20: 2950 mV normal idle
- [ 0.100765 / 01-01 00:00:00.090] 8941_l21: 2950 mV normal idle
- [ 0.101186 / 01-01 00:00:00.090] 8941_l22: 3300 mV normal idle
- [ 0.101631 / 01-01 00:00:00.100] 8941_l23: 3000 mV normal idle
- [ 0.102030 / 01-01 00:00:00.100] 8941_l24: 3075 mV normal idle
- [ 0.102410 / 01-01 00:00:00.100] 8941_lvs1:
- [ 0.102761 / 01-01 00:00:00.100] 8941_lvs2:
- [ 0.103105 / 01-01 00:00:00.100] 8941_lvs3:
- [ 0.105181 / 01-01 00:00:00.100] PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 1/4
- [ 0.105196 / 01-01 00:00:00.100] PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 1/4
- [ 0.105475 / 01-01 00:00:00.100] krait0: 500 <--> 1120 mV at 900 mV fast normal idle
- [ 0.105908 / 01-01 00:00:00.100] krait1: 500 <--> 1120 mV at 900 mV fast normal idle
- [ 0.106344 / 01-01 00:00:00.100] krait2: 500 <--> 1120 mV at 900 mV fast normal idle
- [ 0.106773 / 01-01 00:00:00.100] krait3: 500 <--> 1120 mV at 900 mV fast normal idle
- [ 0.137099 / 01-01 00:00:00.130] msm-thermal qcom,msm-thermal.71: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. KTM continues
- [ 0.137889 / 01-01 00:00:00.130] vdd_restriction_reg_init:Defer vdd rstr freq init
- [ 0.137909 / 01-01 00:00:00.130] msm-thermal qcom,msm-thermal.71: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qti,pmic-opt-curr-temp. KTM continues
- [ 0.138386 / 01-01 00:00:00.130] persistent_ram: found existing buffer, size 262132, start 255527
- [ 0.140945 / 01-01 00:00:00.130] console [ram-1] enabled
- [ 0.141043 / 01-01 00:00:00.130] KCAL_DEBUG : lge_add_lcd_kcal_devices
- [ 0.141284 / 01-01 00:00:00.130] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.141302 / 01-01 00:00:00.130] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.141958 / 01-01 00:00:00.140] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
- [ 0.142315 / 01-01 00:00:00.140] populate_soc_sysfs_files:Unknown socinfo format:9
- [ 0.144675 / 01-01 00:00:00.140] 8941_boost: 5000 mV
- [ 0.145142 / 01-01 00:00:00.140] 8941_mvs1:
- [ 0.145191 / 01-01 00:00:00.140] 8941_mvs1: supplied by 8941_boost
- [ 0.145600 / 01-01 00:00:00.140] 8941_mvs2:
- [ 0.145646 / 01-01 00:00:00.140] 8941_mvs2: supplied by 8941_boost
- [ 0.150985 / 01-01 00:00:00.140] sps:BAM 0xf9984000 (va:0xc5ae0000) enabled: ver:0x6, number of pipes:20
- [ 0.151003 / 01-01 00:00:00.140] sps:BAM 0xf9984000 is registered.
- [ 0.151023 / 01-01 00:00:00.140] sps:sps is ready.
- [ 0.152049 / 01-01 00:00:00.150] spmi qpnp-bsi-e0518200: Driver qcom,qpnp-bsi requests probe deferral
- [ 0.154157 / 01-01 00:00:00.150] gdsc_venus:
- [ 0.154469 / 01-01 00:00:00.150] gdsc_mdss:
- [ 0.154764 / 01-01 00:00:00.150] gdsc_jpeg:
- [ 0.155099 / 01-01 00:00:00.150] gdsc_vfe:
- [ 0.155362 / 01-01 00:00:00.150] gdsc_oxili_gx:
- [ 0.155436 / 01-01 00:00:00.150] gdsc_oxili_gx: supplied by 8841_s4_corner
- [ 0.155736 / 01-01 00:00:00.150] gdsc_oxili_cx:
- [ 0.156003 / 01-01 00:00:00.150] gdsc_usb_hsic:
- [ 0.156584 / 01-01 00:00:00.150] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- [ 0.157699 / 01-01 00:00:00.150] msm_bus_fabric fc478000.msm-mmss-noc: msmbus_coresight initialized
- [ 0.158709 / 01-01 00:00:00.150] msm_bus_fabric fc460000.msm-sys-noc: msmbus_coresight initialized
- [ 0.159689 / 01-01 00:00:00.150] msm_bus_fabric fc468000.msm-periph-noc: msmbus_coresight initialized
- [ 0.160886 / 01-01 00:00:00.150] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 5120
- [ 0.161441 / 01-01 00:00:00.150] msm_bus_fabric fc380000.msm-bimc: msmbus_coresight initialized
- [ 0.161670 / 01-01 00:00:00.160] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 6144
- [ 0.162210 / 01-01 00:00:00.160] msm_bus_fabric fc470000.msm-ocmem-noc: msmbus_coresight initialized
- [ 0.163067 / 01-01 00:00:00.160] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c5e00000
- [ 0.163857 / 01-01 00:00:00.160] Physical OCMEM zone layout:
- [ 0.163875 / 01-01 00:00:00.160] zone graphics : 0xfec00000 - 0xfecfffff (1024 KB)
- [ 0.163893 / 01-01 00:00:00.160] zone lp_audio : 0xfed00000 - 0xfed7ffff ( 512 KB)
- [ 0.163912 / 01-01 00:00:00.160] zone video : 0xfed00000 - 0xfed7ffff ( 512 KB)
- [ 0.185515 / 01-01 00:00:00.180] bio: create slab <bio-0> at 0
- [ 0.186285 / 01-01 00:00:00.180] vph_pwr:
- [ 0.187106 / 01-01 00:00:00.180] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
- [ 0.187197 / 01-01 00:00:00.180] ION-heap mm: Cannot specify alignment for this type of heap
- [ 0.187273 / 01-01 00:00:00.180] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
- [ 0.187357 / 01-01 00:00:00.180] ION-heap adsp: Cannot specify alignment for this type of heap
- [ 0.187434 / 01-01 00:00:00.180] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
- [ 0.188005 / 01-01 00:00:00.180] ION heap system created
- [ 0.188127 / 01-01 00:00:00.180] ION heap kmalloc created
- [ 0.188161 / 01-01 00:00:00.180] ION heap mm created at 0xcdc00000 with size fc00000
- [ 0.188192 / 01-01 00:00:00.180] ION heap adsp created at 0xc9c00000 with size 3f00000
- [ 0.188223 / 01-01 00:00:00.180] ION heap qsecom created at 0xc8800000 with size 1100000
- [ 0.188270 / 01-01 00:00:00.180] ION heap audio created at 0xdda00000 with size 614000
- [ 0.188302 / 01-01 00:00:00.180] ION heap pil_1 created at 0x05a00000 with size 2100000
- [ 0.188334 / 01-01 00:00:00.180] ION heap pil_2 created at 0x08000000 with size 5000000
- [ 0.190171 / 01-01 00:00:00.180] SCSI subsystem initialized
- [ 0.190299 / 01-01 00:00:00.180] usbcore: registered new interface driver usbfs
- [ 0.190387 / 01-01 00:00:00.180] usbcore: registered new interface driver hub
- [ 0.190511 / 01-01 00:00:00.180] usbcore: registered new device driver usb
- [ 0.190854 / 01-01 00:00:00.180] Linux media interface: v0.10
- [ 0.190902 / 01-01 00:00:00.180] Linux video capture interface: v2.00
- [ 0.193616 / 01-01 00:00:00.190] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c5bc0000, with 3 ctx banks
- [ 0.194648 / 01-01 00:00:00.190] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c5be0000, with 3 ctx banks
- [ 0.196320 / 01-01 00:00:00.190] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c5c80000, with 5 ctx banks
- [ 0.197295 / 01-01 00:00:00.190] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c5ca0000, with 3 ctx banks
- [ 0.198225 / 01-01 00:00:00.190] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c5cc0000, with 3 ctx banks
- [ 0.199241 / 01-01 00:00:00.190] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
- [ 0.199396 / 01-01 00:00:00.190] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
- [ 0.199544 / 01-01 00:00:00.190] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
- [ 0.199703 / 01-01 00:00:00.190] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
- [ 0.199865 / 01-01 00:00:00.190] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
- [ 0.200011 / 01-01 00:00:00.190] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
- [ 0.200168 / 01-01 00:00:00.190] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
- [ 0.200331 / 01-01 00:00:00.190] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
- [ 0.200476 / 01-01 00:00:00.190] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
- [ 0.200624 / 01-01 00:00:00.190] msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
- [ 0.200769 / 01-01 00:00:00.190] msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
- [ 0.200941 / 01-01 00:00:00.190] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
- [ 0.201085 / 01-01 00:00:00.190] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
- [ 0.201232 / 01-01 00:00:00.190] msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
- [ 0.201392 / 01-01 00:00:00.190] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
- [ 0.201547 / 01-01 00:00:00.190] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
- [ 0.201691 / 01-01 00:00:00.200] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
- [ 0.202932 / 01-01 00:00:00.200] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.203382 / 01-01 00:00:00.200] Bluetooth: Core ver 2.16
- [ 0.203431 / 01-01 00:00:00.200] NET: Registered protocol family 31
- [ 0.203445 / 01-01 00:00:00.200] Bluetooth: HCI device and connection manager initialized
- [ 0.203461 / 01-01 00:00:00.200] Bluetooth: HCI socket layer initialized
- [ 0.203475 / 01-01 00:00:00.200] Bluetooth: L2CAP socket layer initialized
- [ 0.203695 / 01-01 00:00:00.200] Bluetooth: SCO socket layer initialized
- [ 0.203946 / 01-01 00:00:00.200] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.205452 / 01-01 00:00:00.200] Switching to clocksource arch_sys_counter
- [ 0.233509 / 01-01 00:00:00.220] NET: Registered protocol family 2
- [ 0.233741 / 01-01 00:00:00.220] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.234255 / 01-01 00:00:00.220] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.234945 / 01-01 00:00:00.220] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.235829 / 01-01 00:00:00.230] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.235845 / 01-01 00:00:00.230] TCP: reno registered
- [ 0.235865 / 01-01 00:00:00.230] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.235902 / 01-01 00:00:00.230] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.236159 / 01-01 00:00:00.230] NET: Registered protocol family 1
- [ 0.236455 / 01-01 00:00:00.230] Trying to unpack rootfs image as initramfs...
- [ 0.471362 / 01-01 00:00:00.460] Freeing initrd memory: 4304K
- [ 0.474953 / 01-01 00:00:00.460] Detected 9 counters on the L2CC PMU.
- [ 0.477011 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
- [ 0.477613 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
- [ 0.477746 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
- [ 0.478365 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
- [ 0.478498 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
- [ 0.479124 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
- [ 0.479284 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
- [ 0.479933 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
- [ 0.480060 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
- [ 0.480731 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
- [ 0.480883 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
- [ 0.481562 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
- [ 0.481689 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
- [ 0.482401 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
- [ 0.482566 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
- [ 0.483286 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
- [ 0.483417 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
- [ 0.484160 / 01-01 00:00:00.470] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
- [ 0.486327 / 01-01 00:00:00.480] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
- [ 0.489957 / 01-01 00:00:00.480] Enter pil_pronto_probe()
- [ 0.490099 / 01-01 00:00:00.480] pil_pronto fb21b000.qcom,pronto: using secure boot
- [ 0.491709 / 01-01 00:00:00.480] pil_venus fdce0000.qcom,venus: using secure boot
- [ 0.501020 / 01-01 00:00:00.490] NET: Registered protocol family 27
- [ 0.506113 / 01-01 00:00:00.500] clock-krait-8974 f9016000.qcom,clock-krait: PVS config version: 1
- [ 0.506146 / 01-01 00:00:00.500] clock-krait-8974 f9016000.qcom,clock-krait: Speed bin: 3
- [ 0.506165 / 01-01 00:00:00.500] clock-krait-8974 f9016000.qcom,clock-krait: PVS bin: 5
- [ 0.506181 / 01-01 00:00:00.500] clock-krait-8974 f9016000.qcom,clock-krait: PVS version: 1
- [ 0.509210 / 01-01 00:00:00.500] L2 @ 729600 KHz
- [ 0.509335 / 01-01 00:00:00.500] CPU0 @ 960000 KHz
- [ 0.509348 / 01-01 00:00:00.500] CPU1 @ unknown rate. Forcing new rate.
- [ 0.509511 / 01-01 00:00:00.500] CPU1 @ 300000 KHz
- [ 0.509544 / 01-01 00:00:00.500] CPU2 @ unknown rate. Forcing new rate.
- [ 0.509722 / 01-01 00:00:00.500] CPU2 @ 300000 KHz
- [ 0.509755 / 01-01 00:00:00.500] CPU3 @ unknown rate. Forcing new rate.
- [ 0.509931 / 01-01 00:00:00.500] CPU3 @ 300000 KHz
- [ 0.520832 / 01-01 00:00:00.510] msm_rpm_log_probe: OK
- [ 0.530259 / 01-01 00:00:00.520] ocmem: Client sensors (id: 6) not allowed to use OCMEM
- [ 0.530302 / 01-01 00:00:00.520] OCMEM notifier registration failed
- [ 0.530341 / 01-01 00:00:00.520] sns_ocmem_main: sns_ocmem_init failed -14
- [ 0.537565 / 01-01 00:00:00.530] lge_bootlog_init: start 9472
- [ 0.537606 / 01-01 00:00:00.530] lge_bootlog_init: size 9472
- [ 0.537640 / 01-01 00:00:00.530] --------------------------------------------------------------
- [ 0.537676 / 01-01 00:00:00.530] below logs are got from bootloader
- [ 0.537709 / 01-01 00:00:00.530] --------------------------------------------------------------
- [ 0.537745 / 01-01 00:00:00.530]
- [ 0.537782 / 01-01 00:00:00.530] [0] welcome to lk
- [ 0.537813 / 01-01 00:00:00.530]
- [ 0.537849 / 01-01 00:00:00.530] [10] platform_init()
- [ 0.537895 / 01-01 00:00:00.530] [10] init_set_cable()=12 - result=0
- [ 0.537962 / 01-01 00:00:00.530] [10] bootcmd_set_board_revision: board revision value is 10 and ntcode from smem
- [ 0.538010 / 01-01 00:00:00.530] [10] target_init()
- [ 0.538078 / 01-01 00:00:00.530] [30] g3 : target_crypto_init_params: crypto_base = 0xfd45a000, bam_base = 0xfd444000 [286]
- [ 0.538129 / 01-01 00:00:00.530] [30] Display Init: Start
- [ 0.538170 / 01-01 00:00:00.530] [30] G3 display_init()
- [ 0.538218 / 01-01 00:00:00.530] [30] QUP IN:bl:8, ff:32, OUT:bl:8, ff:32
- [ 0.538266 / 01-01 00:00:00.530] [30] Polling Status for state:0x0
- [ 0.538313 / 01-01 00:00:00.530] [30] Polling Status for state:0x10
- [ 0.538360 / 01-01 00:00:00.530] [30] Polling Status for state:0x0
- [ 0.538407 / 01-01 00:00:00.530] [30] Polling Status for state:0x1
- [ 0.538454 / 01-01 00:00:00.530] [30] Polling Status for state:0x0
- [ 0.538500 / 01-01 00:00:00.530] [30] Polling Status for state:0x3
- [ 0.538551 / 01-01 00:00:00.530] [30] WR:Wrote 0x200017c to out_ff:0xf9967110
- [ 0.538603 / 01-01 00:00:00.530] [30] WR:Wrote 0x300 to out_ff:0xf9967114
- [ 0.538650 / 01-01 00:00:00.530] [30] Polling Status for state:0x0
- [ 0.538697 / 01-01 00:00:00.530] [30] Polling Status for state:0x1
- [ 0.538743 / 01-01 00:00:00.530] [30] idx:6, rem:1, num:1, mode:0
- [ 0.538789 / 01-01 00:00:00.530] [30] Polling Status for state:0x0
- [ 0.538837 / 01-01 00:00:00.530] [30] Polling Status for state:0x10
- [ 0.538884 / 01-01 00:00:00.530] [30] Polling Status for state:0x0
- [ 0.538931 / 01-01 00:00:00.530] [30] Polling Status for state:0x1
- [ 0.538977 / 01-01 00:00:00.530] [30] Polling Status for state:0x0
- [ 0.539024 / 01-01 00:00:00.530] [30] Polling Status for state:0x3
- [ 0.539075 / 01-01 00:00:00.530] [30] WR:Wrote 0x201017c to out_ff:0xf9967110
- [ 0.539129 / 01-01 00:00:00.530] [30] WR:Wrote 0x300 to out_ff:0xf9967114
- [ 0.539176 / 01-01 00:00:00.530] [30] Polling Status for state:0x0
- [ 0.539224 / 01-01 00:00:00.530] [30] Polling Status for state:0x1
- [ 0.539270 / 01-01 00:00:00.530] [30] idx:6, rem:1, num:1, mode:0
- [ 0.539317 / 01-01 00:00:00.530] [30] Polling Status for state:0x0
- [ 0.539364 / 01-01 00:00:00.530] [30] Polling Status for state:0x10
- [ 0.539410 / 01-01 00:00:00.530] [30] Polling Status for state:0x0
- [ 0.539457 / 01-01 00:00:00.530] [30] Polling Status for state:0x1
- [ 0.539504 / 01-01 00:00:00.530] [30] Polling Status for state:0x0
- [ 0.539551 / 01-01 00:00:00.530] [30] Polling Status for state:0x3
- [ 0.539603 / 01-01 00:00:00.530] [30] WR:Wrote 0x203017c to out_ff:0xf9967110
- [ 0.539654 / 01-01 00:00:00.530] [30] WR:Wrote 0x343 to out_ff:0xf9967114
- [ 0.539701 / 01-01 00:00:00.530] [30] Polling Status for state:0x0
- [ 0.539748 / 01-01 00:00:00.530] [30] Polling Status for state:0x1
- [ 0.539794 / 01-01 00:00:00.530] [30] idx:6, rem:1, num:1, mode:0
- [ 0.539841 / 01-01 00:00:00.530] [30] Polling Status for state:0x0
- [ 0.539888 / 01-01 00:00:00.530] [30] Polling Status for state:0x10
- [ 0.539935 / 01-01 00:00:00.530] [30] Polling Status for state:0x0
- [ 0.539982 / 01-01 00:00:00.530] [30] Polling Status for state:0x1
- [ 0.540028 / 01-01 00:00:00.530] [30] Polling Status for state:0x0
- [ 0.540075 / 01-01 00:00:00.530] [30] Polling Status for state:0x3
- [ 0.540127 / 01-01 00:00:00.530] [30] WR:Wrote 0x2ff017c to out_ff:0xf9967110
- [ 0.540178 / 01-01 00:00:00.530] [30] WR:Wrote 0x380 to out_ff:0xf9967114
- [ 0.540225 / 01-01 00:00:00.530] [30] Polling Status for state:0x0
- [ 0.540272 / 01-01 00:00:00.530] [30] Polling Status for state:0x1
- [ 0.540317 / 01-01 00:00:00.530] [30] idx:6, rem:1, num:1, mode:0
- [ 0.540360 / 01-01 00:00:00.530] [80] Display Init: Done
- [ 0.540400 / 01-01 00:00:00.530] [80] set SIC panel
- [ 0.540447 / 01-01 00:00:00.530] [80] pm8x41_get_is_cold_boot: Warm boot
- [ 0.540491 / 01-01 00:00:00.530] [80] SKIP setting LDO 10
- [ 0.540535 / 01-01 00:00:00.530] [80] MDP GDSC already enabled
- [ 0.540578 / 01-01 00:00:00.530] [90] [hall_ic] covered? 0
- [ 0.540619 / 01-01 00:00:00.530] [90] display_lge_splash
- [ 0.540659 / 01-01 00:00:00.530] [100] display_lge_splash
- [ 0.540704 / 01-01 00:00:00.530] [100] Config MIPI_VIDEO_PANEL.
- [ 0.540748 / 01-01 00:00:00.530] [100] reset SIC display : 56
- [ 0.540794 / 01-01 00:00:00.530] [110] Polling Status for state:0x0
- [ 0.540841 / 01-01 00:00:00.530] [110] Polling Status for state:0x10
- [ 0.540889 / 01-01 00:00:00.530] [110] Polling Status for state:0x0
- [ 0.540937 / 01-01 00:00:00.530] [110] Polling Status for state:0x1
- [ 0.540984 / 01-01 00:00:00.530] [110] Polling Status for state:0x0
- [ 0.541031 / 01-01 00:00:00.530] [110] Polling Status for state:0x3
- [ 0.541082 / 01-01 00:00:00.530] [110] WR:Wrote 0x200017c to out_ff:0xf9967110
- [ 0.541134 / 01-01 00:00:00.530] [110] WR:Wrote 0x30a to out_ff:0xf9967114
- [ 0.541183 / 01-01 00:00:00.530] [110] Polling Status for state:0x0
- [ 0.541230 / 01-01 00:00:00.530] [110] Polling Status for state:0x1
- [ 0.541277 / 01-01 00:00:00.530] [110] idx:6, rem:1, num:1, mode:0
- [ 0.541322 / 01-01 00:00:00.530] [160] [LGE][LK] Disable HS400
- [ 0.541366 / 01-01 00:00:00.530] [160] [LGE][LK] Disable HS400
- [ 0.541412 / 01-01 00:00:00.530] [180] Polling Status for state:0x0
- [ 0.541459 / 01-01 00:00:00.530] [180] Polling Status for state:0x10
- [ 0.541507 / 01-01 00:00:00.530] [180] Polling Status for state:0x0
- [ 0.541554 / 01-01 00:00:00.530] [180] Polling Status for state:0x1
- [ 0.541601 / 01-01 00:00:00.530] [180] Polling Status for state:0x0
- [ 0.541648 / 01-01 00:00:00.530] [180] Polling Status for state:0x3
- [ 0.541700 / 01-01 00:00:00.530] [180] WR:Wrote 0x201017c to out_ff:0xf9967110
- [ 0.541752 / 01-01 00:00:00.530] [180] WR:Wrote 0x30a to out_ff:0xf9967114
- [ 0.541800 / 01-01 00:00:00.530] [180] Polling Status for state:0x0
- [ 0.541847 / 01-01 00:00:00.530] [180] Polling Status for state:0x1
- [ 0.541896 / 01-01 00:00:00.530] [180] idx:6, rem:1, num:1, mode:0
- [ 0.541949 / 01-01 00:00:00.530] [190] mdss_dsi_panel_initialize - sending command
- [ 0.541998 / 01-01 00:00:00.530] [210] Turn on MIPI_VIDEO_PANEL.
- [ 0.542046 / 01-01 00:00:00.530] [240] Done initialization of the card
- [ 0.542092 / 01-01 00:00:00.530] [260] target partition updates
- [ 0.542137 / 01-01 00:00:00.530] [260] card size 31268536320 GB
- [ 0.542183 / 01-01 00:00:00.530] [260] [shs0917] update GPT to 32G
- [ 0.542241 / 01-01 00:00:00.530] [260] [shs0917][target_partition] already updated GPT to 32GB
- [ 0.542284 / 01-01 00:00:00.530] [260] KSwitch:
- [ 0.542322 / 01-01 00:00:00.530] [260] [KSwitch] : 0
- [ 0.542365 / 01-01 00:00:00.530] D - 1939190 - SBL1, Delta
- [ 0.542413 / 01-01 00:00:00.530] [260] partition_get_size 2097152 bytes
- [ 0.542462 / 01-01 00:00:00.530] [270] cable type from shared memory: 12
- [ 0.542503 / 01-01 00:00:00.530] [270] get_qem = 0
- [ 0.542540 / 01-01 00:00:00.530] [270] get_qem = 0
- [ 0.542586 / 01-01 00:00:00.530] [280] Video lane tested successfully
- [ 0.542630 / 01-01 00:00:00.530] [280] backlight_on: enter
- [ 0.542674 / 01-01 00:00:00.530] [330] restart_reason: 0x77665502
- [ 0.542730 / 01-01 00:00:00.530] [330] bootcmd_set_one_binary ** bootcmd_set_one_binary
- [ 0.542783 / 01-01 00:00:00.530] [330] partition_get_size 16777216 bytes
- [ 0.542844 / 01-01 00:00:00.530] [330] lge_one_binary_read_hwinfo : HWINFO from misc partition (2)
- [ 0.542902 / 01-01 00:00:00.530] [330] lge_one_binary_read_hwinfo : version = 0x101
- [ 0.542961 / 01-01 00:00:00.530] [330] lge_one_binary_read_hwinfo : model_name = LG-D855
- [ 0.543031 / 01-01 00:00:00.530] [330] lge_one_binary_copy_hwinfo : model_name = LG-D855 , misc.model_name = LG-D855
- [ 0.543097 / 01-01 00:00:00.530] [330] lge_one_binary_init : use HWINFO from misc partition
- [ 0.543159 / 01-01 00:00:00.530] [330] lge_one_binary_init : Model Name = LG-D855 -> LG-D855
- [ 0.543206 / 01-01 00:00:00.530] [330] webdload status:0
- [ 0.543247 / 01-01 00:00:00.530] [330] webdload status:0
- [ 0.543291 / 01-01 00:00:00.530] [340] [shs0917] is_update_gpt
- [ 0.543337 / 01-01 00:00:00.530] [340] [shs0917] is_update_gpt: 0
- [ 0.543386 / 01-01 00:00:00.530] [340] partition_get_size 16777216 bytes
- [ 0.543457 / 01-01 00:00:00.530] [340] >>>>>>>>>>> aboot_init : NT code = "1","FFF,FFF,FFFFFFFF,FFFFFFFF,56" <<<<<<<<<<<<
- [ 0.543518 / 01-01 00:00:00.530] [340] bootmode_set_ntcode: model MSM8974 ntcode
- [ 0.543587 / 01-01 00:00:00.530] [340] bootmode_set_ntcode: put ntcode "1","FFF,FFF,FFFFFFFF,FFFFFFFF,56" to smem
- [ 0.543654 / 01-01 00:00:00.530] [340] bootmode_set_model_name: put lg_model_name LG-D855 to smem
- [ 0.543717 / 01-01 00:00:00.530] [350] --------------------------------------------------------
- [ 0.543779 / 01-01 00:00:00.530] [350] OemFlash_GetPartitionTable : 8,aboot,5200000,200000
- [ 0.543841 / 01-01 00:00:00.530] [350] --------------------------------------------------------
- [ 0.543905 / 01-01 00:00:00.530] [390] --------------------------------------------------------
- [ 0.543966 / 01-01 00:00:00.530] [390] OemFlash_GetPartitionTable : 16,fota,e000000,2000000
- [ 0.544029 / 01-01 00:00:00.530] [390] --------------------------------------------------------
- [ 0.544074 / 01-01 00:00:00.530] [430] device id : 36
- [ 0.544119 / 01-01 00:00:00.530] [430] Polling Status for state:0x0
- [ 0.544166 / 01-01 00:00:00.530] [430] Polling Status for state:0x10
- [ 0.544214 / 01-01 00:00:00.530] [430] Polling Status for state:0x0
- [ 0.544261 / 01-01 00:00:00.530] [430] Polling Status for state:0x1
- [ 0.544308 / 01-01 00:00:00.530] [430] Polling Status for state:0x0
- [ 0.544357 / 01-01 00:00:00.530] [430] Polling Status for state:0x3
- [ 0.544409 / 01-01 00:00:00.530] [430] WR:Wrote 0x224016c to out_ff:0xf9967110
- [ 0.544461 / 01-01 00:00:00.530] [430] WR:Wrote 0x301 to out_ff:0xf9967114
- [ 0.544509 / 01-01 00:00:00.530] [430] Polling Status for state:0x0
- [ 0.544556 / 01-01 00:00:00.530] [430] Polling Status for state:0x1
- [ 0.544603 / 01-01 00:00:00.530] [430] idx:6, rem:1, num:1, mode:0
- [ 0.544644 / 01-01 00:00:00.530] [430] device id : 36
- [ 0.544690 / 01-01 00:00:00.530] [430] Polling Status for state:0x0
- [ 0.544737 / 01-01 00:00:00.530] [430] Polling Status for state:0x10
- [ 0.544784 / 01-01 00:00:00.530] [430] Polling Status for state:0x0
- [ 0.544832 / 01-01 00:00:00.530] [430] Polling Status for state:0x1
- [ 0.544879 / 01-01 00:00:00.530] [430] Polling Status for state:0x0
- [ 0.544926 / 01-01 00:00:00.530] [430] Polling Status for state:0x3
- [ 0.544978 / 01-01 00:00:00.530] [430] WR:Wrote 0x210016c to out_ff:0xf9967110
- [ 0.545030 / 01-01 00:00:00.530] [430] WR:Wrote 0x304 to out_ff:0xf9967114
- [ 0.545078 / 01-01 00:00:00.530] [430] Polling Status for state:0x0
- [ 0.545125 / 01-01 00:00:00.530] [430] Polling Status for state:0x1
- [ 0.545171 / 01-01 00:00:00.530] [430] idx:6, rem:1, num:1, mode:0
- [ 0.545213 / 01-01 00:00:00.530] [430] device id : 36
- [ 0.545258 / 01-01 00:00:00.530] [430] Polling Status for state:0x0
- [ 0.545306 / 01-01 00:00:00.530] [430] Polling Status for state:0x10
- [ 0.545353 / 01-01 00:00:00.530] [430] Polling Status for state:0x0
- [ 0.545400 / 01-01 00:00:00.530] [430] Polling Status for state:0x1
- [ 0.545447 / 01-01 00:00:00.530] [430] Polling Status for state:0x0
- [ 0.545493 / 01-01 00:00:00.530] [430] Polling Status for state:0x3
- [ 0.545608 / 01-01 00:00:00.540] [430] WR:Wrote 0x216016c to out_ff:0xf9967110
- [ 0.545662 / 01-01 00:00:00.540] [430] WR:Wrote 0x301 to out_ff:0xf9967114
- [ 0.545711 / 01-01 00:00:00.540] [430] Polling Status for state:0x0
- [ 0.545759 / 01-01 00:00:00.540] [430] Polling Status for state:0x1
- [ 0.545807 / 01-01 00:00:00.540] [430] idx:6, rem:1, num:1, mode:0
- [ 0.545848 / 01-01 00:00:00.540] [430] device id : 36
- [ 0.545893 / 01-01 00:00:00.540] [430] Polling Status for state:0x0
- [ 0.545941 / 01-01 00:00:00.540] [430] Polling Status for state:0x10
- [ 0.545988 / 01-01 00:00:00.540] [430] Polling Status for state:0x0
- [ 0.546035 / 01-01 00:00:00.540] [430] Polling Status for state:0x1
- [ 0.546082 / 01-01 00:00:00.540] [430] Polling Status for state:0x0
- [ 0.546129 / 01-01 00:00:00.540] [430] Polling Status for state:0x3
- [ 0.546181 / 01-01 00:00:00.540] [430] WR:Wrote 0x21a016c to out_ff:0xf9967110
- [ 0.546233 / 01-01 00:00:00.540] [430] WR:Wrote 0x302 to out_ff:0xf9967114
- [ 0.546281 / 01-01 00:00:00.540] [430] Polling Status for state:0x0
- [ 0.546329 / 01-01 00:00:00.540] [430] Polling Status for state:0x1
- [ 0.546375 / 01-01 00:00:00.540] [430] idx:6, rem:1, num:1, mode:0
- [ 0.546416 / 01-01 00:00:00.540] [430] device id : 36
- [ 0.546462 / 01-01 00:00:00.540] [430] Polling Status for state:0x0
- [ 0.546509 / 01-01 00:00:00.540] [430] Polling Status for state:0x10
- [ 0.546556 / 01-01 00:00:00.540] [430] Polling Status for state:0x0
- [ 0.546604 / 01-01 00:00:00.540] [430] Polling Status for state:0x1
- [ 0.546651 / 01-01 00:00:00.540] [430] Polling Status for state:0x0
- [ 0.546698 / 01-01 00:00:00.540] [430] Polling Status for state:0x3
- [ 0.546750 / 01-01 00:00:00.540] [430] WR:Wrote 0x21c016c to out_ff:0xf9967110
- [ 0.546802 / 01-01 00:00:00.540] [430] WR:Wrote 0x30d to out_ff:0xf9967114
- [ 0.546850 / 01-01 00:00:00.540] [430] Polling Status for state:0x0
- [ 0.546897 / 01-01 00:00:00.540] [430] Polling Status for state:0x1
- [ 0.546944 / 01-01 00:00:00.540] [430] idx:6, rem:1, num:1, mode:0
- [ 0.546985 / 01-01 00:00:00.540] [430] device id : 36
- [ 0.547030 / 01-01 00:00:00.540] [430] Polling Status for state:0x0
- [ 0.547078 / 01-01 00:00:00.540] [430] Polling Status for state:0x10
- [ 0.547126 / 01-01 00:00:00.540] [430] Polling Status for state:0x0
- [ 0.547174 / 01-01 00:00:00.540] [430] Polling Status for state:0x1
- [ 0.547221 / 01-01 00:00:00.540] [430] Polling Status for state:0x0
- [ 0.547268 / 01-01 00:00:00.540] [430] Polling Status for state:0x3
- [ 0.547320 / 01-01 00:00:00.540] [430] WR:Wrote 0x221016c to out_ff:0xf9967110
- [ 0.547372 / 01-01 00:00:00.540] [430] WR:Wrote 0x34e to out_ff:0xf9967114
- [ 0.547420 / 01-01 00:00:00.540] [430] Polling Status for state:0x0
- [ 0.547468 / 01-01 00:00:00.540] [430] Polling Status for state:0x1
- [ 0.547515 / 01-01 00:00:00.540] [430] idx:6, rem:1, num:1, mode:0
- [ 0.547556 / 01-01 00:00:00.540] [430] device id : 36
- [ 0.547601 / 01-01 00:00:00.540] [430] Polling Status for state:0x0
- [ 0.547648 / 01-01 00:00:00.540] [430] Polling Status for state:0x10
- [ 0.547696 / 01-01 00:00:00.540] [430] Polling Status for state:0x0
- [ 0.547743 / 01-01 00:00:00.540] [430] Polling Status for state:0x1
- [ 0.547791 / 01-01 00:00:00.540] [430] Polling Status for state:0x0
- [ 0.547838 / 01-01 00:00:00.540] [430] Polling Status for state:0x3
- [ 0.547890 / 01-01 00:00:00.540] [430] WR:Wrote 0x220016c to out_ff:0xf9967110
- [ 0.547941 / 01-01 00:00:00.540] [430] WR:Wrote 0x301 to out_ff:0xf9967114
- [ 0.547989 / 01-01 00:00:00.540] [430] Polling Status for state:0x0
- [ 0.548037 / 01-01 00:00:00.540] [430] Polling Status for state:0x1
- [ 0.548083 / 01-01 00:00:00.540] [430] idx:6, rem:1, num:1, mode:0
- [ 0.548130 / 01-01 00:00:00.540] [430] cont_splash_screen is set 1
- [ 0.548175 / 01-01 00:00:00.540] [430] Diplay async initialized
- [ 0.548225 / 01-01 00:00:00.540] [540] OemFlash_GetPartitionTable Complete
- [ 0.548272 / 01-01 00:00:00.540] [550] g_stUSD.enUpdateState = 0
- [ 0.548329 / 01-01 00:00:00.540] [550] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
- [ 0.548382 / 01-01 00:00:00.540] [550] Loading boot image (14583808): start
- [ 0.548434 / 01-01 00:00:00.540] [630] Loading boot image (14583808): done
- [ 0.548479 / 01-01 00:00:00.540] [630] Secure boot started
- [ 0.548520 / 01-01 00:00:00.540] [630] Device UnLock
- [ 0.548559 / 01-01 00:00:00.540] [630] Secure boot End
- [ 0.548631 / 01-01 00:00:00.540] [640] Found an appended flattened device tree (Qualcomm MSM 8974 G3 GLOBAL COM - 218 118 0x10000)
- [ 0.548712 / 01-01 00:00:00.540] [640] Device tree's msm_id doesn't match the board: <218 118 0x10000> != <194 118 0x10001>
- [ 0.548795 / 01-01 00:00:00.540] [640] Found an appended flattened device tree (Qualcomm MSM 8974 AC G3 GLOBAL COM - 194 118 0x10001)
- [ 0.548873 / 01-01 00:00:00.540] [640] Device tree's msm_id matches the board: <194 118 0x10001> == <194 118 0x10001>
- [ 0.548924 / 01-01 00:00:00.540] [640] PON_PON_REASON1:0x80
- [ 0.548970 / 01-01 00:00:00.540] [640] PON_WARM_RESET_REASON1:0x2
- [ 0.549016 / 01-01 00:00:00.540] [640] PON_WARM_RESET_REASON2:0x0
- [ 0.549060 / 01-01 00:00:00.540] [640] PON_POFF_REASON1:0x0
- [ 0.549103 / 01-01 00:00:00.540] [640] PON_POFF_REASON2:0x20
- [ 0.549148 / 01-01 00:00:00.540] [640] PON_SOFT_RESET_REASON1:0x0
- [ 0.549195 / 01-01 00:00:00.540] [640] PON_SOFT_RESET_REASON2:0x0
- [ 0.549245 / 01-01 00:00:00.540] [640] batt type from shared memory: 24130
- [ 0.549310 / 01-01 00:00:00.540] [640] get_display_kcal = 0, 0, 0, [640] batt type from shared memory: 24130
- [ 0.549367 / 01-01 00:00:00.540] [640] batt type from shared memory: 24130
- [ 0.549527 / 01-01 00:00:00.540] [640] lge_cmdline = console=ttyHSL0,115200,n8 androidboot.hardware=g3 user_debug=31 msm_rtb.filter=0x0 androidboot.emmc=true androidboot.serialno=LGD855ad14c030 gpt lge.signed_image=true androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_lgit_sic_mip[640] Updating device tree: start
- [ 0.549613 / 01-01 00:00:00.540] [670] Updating device tree: done
- [ 0.549683 / 01-01 00:00:00.540] [670] booting linux @ 0x8000, ramdisk @ 0x2000000 (4407727), tags/device tree @ 0x1e00000
- [ 0.549738 / 01-01 00:00:00.540] [670] Turn off MIPI_VIDEO_PANEL.
- [ 0.549793 / 01-01 00:00:00.540] [670] Continuous splash enabled, keeping panel alive.
- [ 0.549829 / 01-01 00:00:00.540]
- [ 0.549859 / 01-01 00:00:00.540] lge_bootlog_init: token (null)
- [ 0.549891 / 01-01 00:00:00.540] --------------------------------------------------------------
- [ 0.551410 / 01-01 00:00:00.540] lge_qfprom_probe : qfprom init
- [ 0.552192 / 01-01 00:00:00.540] mpm_counter: [ 0.552177]:(142961)
- [ 0.557077 / 01-01 00:00:00.550] MOCA Kernel Probe module init OK!!..
- [ 0.557084 / 01-01 00:00:00.550] lge_moca_kernel_monitor_init: Init for moca irq monitor
- [ 0.557174 / 01-01 00:00:00.550] audit: initializing netlink socket (disabled)
- [ 0.557196 / 01-01 00:00:00.550] type=2000 audit(0.550:1): initialized
- [ 0.557722 / 01-01 00:00:00.550] highmem bounce pool size: 64 pages
- [ 0.560577 / 01-01 00:00:00.550] fuse init (API version 7.18)
- [ 0.560674 / 01-01 00:00:00.550] msgmni has been set to 663
- [ 0.561994 / 01-01 00:00:00.550] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
- [ 0.562003 / 01-01 00:00:00.550] io scheduler noop registered
- [ 0.562010 / 01-01 00:00:00.550] io scheduler deadline registered
- [ 0.562021 / 01-01 00:00:00.550] io scheduler row registered (default)
- [ 0.562078 / 01-01 00:00:00.550] io scheduler cfq registered
- [ 0.562086 / 01-01 00:00:00.550] io scheduler test-iosched registered
- [ 0.562241 / 01-01 00:00:00.550] gpiochip_add: registered GPIOs 444 to 447 on device: pm8841-mpp
- [ 0.563073 / 01-01 00:00:00.550] gpiochip_add: registered GPIOs 409 to 443 on device: pm8941-gpio
- [ 0.565408 / 01-01 00:00:00.550] gpiochip_add: registered GPIOs 402 to 408 on device: pm8941-mpp
- [ 0.566140 / 01-01 00:00:00.560] lm3697_bl_parse_dt: hvled : 12, register[0x10] = 4
- [ 0.566732 / 01-01 00:00:00.560] lm3697_bl_brightness_configure: set Linear Mode
- [ 0.566998 / 01-01 00:00:00.560] lm3697_lcd_backlight_set_level: backlight level from table 177 -> 625
- [ 0.567260 / 01-01 00:00:00.560] lm3697_bl_probe : probe done
- [ 0.567748 / 01-01 00:00:00.560] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc5d40000
- [ 0.567770 / 01-01 00:00:00.560] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc5cd6000
- [ 0.567836 / 01-01 00:00:00.560] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-ad-off : spec error in device tree
- [ 0.568038 / 01-01 00:00:00.560] mdss_mdp_pp_argc: >>>>> mdss_mdp_pp_argc
- [ 0.568046 / 01-01 00:00:00.560] update_preset_lcdc_lut: update_preset_lcdc_lut red=[255], green=[255], blue=[255]
- [ 0.568053 / 01-01 00:00:00.560] mdss_mdp_pp_argc_kcal: >>>>> mdss_mdp_pp_argc_kcal
- [ 0.568940 / 01-01 00:00:00.560] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.568972 / 01-01 00:00:00.560] mdss_dsi_get_dt_vreg_data : skip L10
- [ 0.568997 / 01-01 00:00:00.560] mdss_dsi_panel_init: Panel Name = LGD 1440p SIC video mode dsi primary panel
- [ 0.569130 / 01-01 00:00:00.560] mdss_dsi_panel_init:1324 Continuous splash flag enabled.
- [ 0.569139 / 01-01 00:00:00.560] mdss_dsi_panel_init:1336 Partial update disabled.
- [ 0.569348 / 01-01 00:00:00.560] dsi_panel_device_register: revno:10, num_gpio:2, en_gpio:-22, en_gpio2:-22
- [ 0.569355 / 01-01 00:00:00.560] dsi_panel_device_register:1458, Disp_en gpio not specified
- [ 0.569362 / 01-01 00:00:00.560] dsi_panel_device_register:1484, Disp_en2 gpio not specified
- [ 0.569370 / 01-01 00:00:00.560] dsi_panel_device_register:1552, reset gpio not specified
- [ 0.569378 / 01-01 00:00:00.560] dsi_panel_device_register:1597, io gpio not specified
- [ 0.569406 / 01-01 00:00:00.560] mdss_dsi_retrieve_ctrl_resources: dsi base=c5cda800 size=600
- [ 0.595877 / 01-01 00:00:00.590] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
- [ 0.596019 / 01-01 00:00:00.590] mdss_hw_init: MDP Rev=10020001
- [ 0.596779 / 01-01 00:00:00.590] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
- [ 0.596797 / 01-01 00:00:00.590] mdss_dsi_get_dt_vreg_data : skip L10
- [ 0.596820 / 01-01 00:00:00.590] mdss_dsi_panel_init: Panel Name = LGD 1440p SIC video mode dsi secondary panel
- [ 0.596954 / 01-01 00:00:00.590] mdss_dsi_panel_init:1324 Continuous splash flag enabled.
- [ 0.596963 / 01-01 00:00:00.590] mdss_dsi_panel_init:1336 Partial update disabled.
- [ 0.597195 / 01-01 00:00:00.590] dsi_panel_device_register: revno:10, num_gpio:2, en_gpio:56, en_gpio2:100
- [ 0.597228 / 01-01 00:00:00.590] dsi_panel_device_register:1597, io gpio not specified
- [ 0.597255 / 01-01 00:00:00.590] mdss_dsi_retrieve_ctrl_resources: dsi base=c5ce0e00 size=600
- [ 0.626388 / 01-01 00:00:00.620] hdmi_tx_get_dt_data: id=0
- [ 0.626395 / 01-01 00:00:00.620] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_HPD_PM'
- [ 0.626405 / 01-01 00:00:00.620] hdmi_tx_get_dt_gpio_data: mp_gpio_cnt = 1
- [ 0.626423 / 01-01 00:00:00.620] hdmi_tx_get_dt_gpio_data: gpio num=34, name=qcom,hdmi-tx-hpd, value=1
- [ 0.626431 / 01-01 00:00:00.620] hdmi_tx_get_dt_gpio_data: no gpio named qcom,hdmi-tx-mux-en
- [ 0.626438 / 01-01 00:00:00.620] hdmi_tx_get_dt_gpio_data: no gpio named qcom,hdmi-tx-mux-sel
- [ 0.626445 / 01-01 00:00:00.620] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_DDC_PM'
- [ 0.626452 / 01-01 00:00:00.620] hdmi_tx_get_dt_gpio_data: mp_gpio_cnt = 2
- [ 0.626468 / 01-01 00:00:00.620] hdmi_tx_get_dt_gpio_data: gpio num=32, name=qcom,hdmi-tx-ddc-clk, value=1
- [ 0.626484 / 01-01 00:00:00.620] hdmi_tx_get_dt_gpio_data: gpio num=33, name=qcom,hdmi-tx-ddc-data, value=1
- [ 0.626491 / 01-01 00:00:00.620] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_CORE_PM'
- [ 0.626497 / 01-01 00:00:00.620] hdmi_tx_get_dt_gpio_data: no gpio
- [ 0.626503 / 01-01 00:00:00.620] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_CEC_PM'
- [ 0.626510 / 01-01 00:00:00.620] hdmi_tx_get_dt_gpio_data: mp_gpio_cnt = 1
- [ 0.626525 / 01-01 00:00:00.620] hdmi_tx_get_dt_gpio_data: gpio num=31, name=qcom,hdmi-tx-cec, value=1
- [ 0.626532 / 01-01 00:00:00.620] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_HPD_PM'
- [ 0.626548 / 01-01 00:00:00.620] hdmi_tx_get_dt_vreg_data: hpd-gdsc min=0, max=0, pc=0
- [ 0.626558 / 01-01 00:00:00.620] hdmi_tx_get_dt_vreg_data: hpd-5v min=0, max=0, pc=0
- [ 0.626566 / 01-01 00:00:00.620] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_DDC_PM'
- [ 0.626577 / 01-01 00:00:00.620] hdmi_tx_get_dt_vreg_data: no vreg
- [ 0.626583 / 01-01 00:00:00.620] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_CORE_PM'
- [ 0.626598 / 01-01 00:00:00.620] hdmi_tx_get_dt_vreg_data: core-vdda min=1800000, max=1800000, pc=300000
- [ 0.626609 / 01-01 00:00:00.620] hdmi_tx_get_dt_vreg_data: core-vcc min=1800000, max=1800000, pc=0
- [ 0.626616 / 01-01 00:00:00.620] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_CEC_PM'
- [ 0.626627 / 01-01 00:00:00.620] hdmi_tx_get_dt_vreg_data: no vreg
- [ 0.626633 / 01-01 00:00:00.620] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_HPD_PM'
- [ 0.626642 / 01-01 00:00:00.620] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_DDC_PM'
- [ 0.626648 / 01-01 00:00:00.620] hdmi_tx_get_dt_clk_data: no clk
- [ 0.626654 / 01-01 00:00:00.620] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_CORE_PM'
- [ 0.626662 / 01-01 00:00:00.620] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_CEC_PM'
- [ 0.626668 / 01-01 00:00:00.620] hdmi_tx_get_dt_clk_data: no clk
- [ 0.626692 / 01-01 00:00:00.620] hdmi_tx_init_resource: 'core_physical': start = 0xc5ce4100, len=0x370
- [ 0.626704 / 01-01 00:00:00.620] hdmi_tx_init_resource: 'phy_physical': start = 0xc5ce6500, len=0x7c
- [ 0.626716 / 01-01 00:00:00.620] hdmi_tx_init_resource: 'qfprom_physical': start = 0xc5ce8000, len=0x60f0
- [ 0.626897 / 01-01 00:00:00.620] hdmi_tx_check_capability: Features <HDMI:ON, HDCP:ON>
- [ 0.626904 / 01-01 00:00:00.620] hdmi_tx_check_capability: Device is HDCP enabled
- [ 0.627143 / 01-01 00:00:00.620] mdss_register_panel: adding framebuffer device fd922100.qcom,hdmi_tx
- [ 0.627322 / 01-01 00:00:00.620] hdmi_tx_probe: Add child devices.
- [ 0.627742 / 01-01 00:00:00.620] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.6
- [ 0.628263 / 01-01 00:00:00.620] mdss_fb_parse_dt: split framebuffer left=720 right=720
- [ 0.628272 / 01-01 00:00:00.620] mdss_fb_alloc_fbmem_iommu: mdss_fb_alloc_fbmem_iommu frame buffer reserve_size=0x1c20000
- [ 0.628618 / 01-01 00:00:00.620] mdss_fb_alloc_fbmem_iommu: allocating 29491200 bytes at c7000000 (de200000 phys) for fb 0
- [ 0.628683 / 01-01 00:00:00.620] mdss_fb_register: FrameBuffer[0] 1440x2560 size=29491200 registered successfully!
- [ 0.628859 / 01-01 00:00:00.620] mdss_fb_register: FrameBuffer[1] 640x480 size=0 registered successfully!
- [ 0.628886 / 01-01 00:00:00.620] hdmi_tx_panel_event_handler: event = 13 suspend=0, hpd_feature=0
- [ 0.628902 / 01-01 00:00:00.620] hdmi_tx_sysfs_create: sysfs group dfe9fc08
- [ 0.628922 / 01-01 00:00:00.620] hdmi_tx_init_features: HDCP feature initialized
- [ 0.628988 / 01-01 00:00:00.620] mdss_fb_register: FrameBuffer[2] 1920x1080 size=0 registered successfully!
- [ 0.629054 / 01-01 00:00:00.620] [anx7812] anx7816_i2c_probe start
- [ 0.629117 / 01-01 00:00:00.620] [anx7812] gpio p_dwn : 422, reset : 413, irq : 28, gpio_cbl_det 421
- [ 0.629151 / 01-01 00:00:00.620] [anx7812] gpio_v10_ctrl 416 avdd33-en-gpio 433
- [ 0.629194 / 01-01 00:00:00.620] [anx7812] anx7816_parse_dt : sp_pdev [0Xe055f200] to pdata->pdev
- [ 0.629200 / 01-01 00:00:00.620] anx7816 init gpio
- [ 0.629880 / 01-01 00:00:00.620] msm_serial_hs: probe of f9921000.uart failed with error -2
- [ 0.630032 / 01-01 00:00:00.620] msm_serial_hs module loaded
- [ 0.630228 / 01-01 00:00:00.620] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
- [ 0.630298 / 01-01 00:00:00.620] f991d000.serial: ttyHSL0 at MMIO 0xf991d000 (irq = 139) is a MSM
- [ 0.631806 / 01-01 00:00:00.620] msm_hsl_console_setup: console setup on port #0
- [ 0.632006 / 01-01 00:00:00.620] console [ttyHSL0] enabled
- [ 0.632078 / 01-01 00:00:00.620] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
- [ 0.632152 / 01-01 00:00:00.620] f9962000.serial: ttyHSL1 at MMIO 0xf9962000 (irq = 150) is a MSM
- [ 0.634446 / 01-01 00:00:00.620] msm_serial_hsl_init: driver initialized
- [ 0.636395 / 01-01 00:00:00.630] diagchar initialized now
- [ 0.636434 / 01-01 00:00:00.630] DM_APP: lge_dm_tty_init
- [ 0.637845 / 01-01 00:00:00.630] kgsl bus ib [0] = 2456000000
- [ 0.637854 / 01-01 00:00:00.630] kgsl bus ib [1] = 3680000000
- [ 0.637861 / 01-01 00:00:00.630] kgsl bus ib [2] = 4912000000
- [ 0.637867 / 01-01 00:00:00.630] kgsl bus ib [3] = 6400000000
- [ 0.637873 / 01-01 00:00:00.630] kgsl bus ib [4] = 7464000000
- [ 0.637879 / 01-01 00:00:00.630] kgsl bus index is 4 for pwrlevel 0
- [ 0.637886 / 01-01 00:00:00.630] kgsl bus index is 3 for pwrlevel 1
- [ 0.637892 / 01-01 00:00:00.630] kgsl bus index is 2 for pwrlevel 2
- [ 0.637898 / 01-01 00:00:00.630] kgsl bus index is 1 for pwrlevel 3
- [ 0.637905 / 01-01 00:00:00.630] kgsl bus index is 0 for pwrlevel 4
- [ 0.638416 / 01-01 00:00:00.630] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
- [ 0.638903 / 01-01 00:00:00.630] kgsl: num bus is 5
- [ 0.641818 / 01-01 00:00:00.630] brd: module loaded
- [ 0.642905 / 01-01 00:00:00.630] loop: module loaded
- [ 0.642952 / 01-01 00:00:00.630] i2c-core: driver [isa1200] using legacy suspend method
- [ 0.642960 / 01-01 00:00:00.630] i2c-core: driver [isa1200] using legacy resume method
- [ 0.643205 / 01-01 00:00:00.630] QSEECOM: qseecom_probe: support_bus_scaling=0x1
- [ 0.643214 / 01-01 00:00:00.630] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
- [ 0.643222 / 01-01 00:00:00.630] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
- [ 0.643229 / 01-01 00:00:00.630] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
- [ 0.643261 / 01-01 00:00:00.630] QSEECOM: qseecom_probe: secure app region addr=0x7b00000 size=0x500000
- [ 0.643857 / 01-01 00:00:00.630] uei_irrc_init
- [ 0.644030 / 01-01 00:00:00.630] uei_irrc_probe
- [ 0.644037 / 01-01 00:00:00.630] [IRRC] probe: pdev->dev.of-node
- [ 0.644070 / 01-01 00:00:00.630] [IRRC] uei,reset-gpio: 78
- [ 0.644226 / 01-01 00:00:00.630] cradle init
- [ 0.644440 / 01-01 00:00:00.630] [Hall IC] hallic_pouch_gpio: 144, hallic_camera_gpio: 0
- [ 0.644479 / 01-01 00:00:00.630] pm8xxx_cradle_probe : init cradle
- [ 0.644494 / 01-01 00:00:00.630] pm8xxx_cradle_probe : hall_pouch_gpio_irq = [309]
- [ 0.644579 / 01-01 00:00:00.630] pm8xxx_cradle_probe :enable_irq_wake Enable(1)
- [ 0.644586 / 01-01 00:00:00.630] pm8xxx_cradle_probe : pdata->irq_flags = [3]
- [ 0.644593 / 01-01 00:00:00.630] pm8xxx_cradle_probe :boot_cradle_det_func START
- [ 0.644600 / 01-01 00:00:00.630] boot_cradle_det_func : boot pouch === > 0
- [ 0.644606 / 01-01 00:00:00.630] boot_cradle_det_func : boot camera === > 0
- [ 0.644613 / 01-01 00:00:00.630] boot_cradle_det_func : [Cradle] boot cradle value is 0
- [ 0.645127 / 01-01 00:00:00.630] vib: sm100_probe()
- [ 0.645152 / 01-01 00:00:00.630] vib: sm100_parse_dt() vpwr_on:0, en_gpio:53, pwm_gpio:27, vibe_n_value:92, clk_rate:29813
- [ 0.645238 / 01-01 00:00:00.630] vib: sm100_probe() dev->init_name : vibrator, dev->kobj : syncoam_sm100.84
- [ 0.645353 / 01-01 00:00:00.630] vib: ImmVibeSPI_ForceOut_Initialize()
- [ 0.645360 / 01-01 00:00:00.630] ImmVibeSPI_ForceOut_AmpDisable : g_bAmpEnabled:1
- [ 0.645460 / 01-01 00:00:00.630] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- [ 0.645467 / 01-01 00:00:00.630] i2c-core: driver [tabla-i2c-core] using legacy resume method
- [ 0.645550 / 01-01 00:00:00.640] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
- [ 0.645557 / 01-01 00:00:00.640] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
- [ 0.685532 / 01-01 00:00:00.680] [anx7812] sp_tx_hardware_poweron: anx7816 power on
- [ 0.685845 / 01-01 00:00:00.680] [anx7812] slimport_chip_detect : CHIPID: ANX1878
- [ 0.745523 / 01-01 00:00:00.740] [anx7812] sp_tx_hardware_powerdown: anx7816 power down
- [ 0.745740 / 01-01 00:00:00.740] msm_hdmi_register_slimport: success
- [ 0.745748 / 01-01 00:00:00.740] [anx7812] anx7816_i2c_probe end
- [ 0.745776 / 01-01 00:00:00.740] i2c-core: driver [anx7816] using legacy suspend method
- [ 0.745783 / 01-01 00:00:00.740] i2c-core: driver [anx7816] using legacy resume method
- [ 0.745807 / 01-01 00:00:00.740] tps65132_probe start
- [ 0.745924 / 01-01 00:00:00.740] Loading PN547 driver
- [ 0.746163 / 01-01 00:00:00.740] pn547_probe : requesting IRQ 312
- [ 0.746228 / 01-01 00:00:00.740] Loading PN547 driver Success!
- [ 0.746388 / 01-01 00:00:00.740] SCSI Media Changer driver v0.25
- [ 0.746666 / 01-01 00:00:00.740] sps: BAM device 0xf9944000 is not registered yet.
- [ 0.746678 / 01-01 00:00:00.740] sps:BAM 0xf9944000 is registered.
- [ 0.746841 / 01-01 00:00:00.740] sps:BAM 0xf9944000 (va:0xc5de0000) enabled: ver:0x13, number of pipes:24
- [ 0.747072 / 01-01 00:00:00.740] spi_qsd f9966000.spi: master is unqueued, this is deprecated
- [ 0.747572 / 01-01 00:00:00.740] tun: Universal TUN/TAP device driver, 1.6
- [ 0.747579 / 01-01 00:00:00.740] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.747616 / 01-01 00:00:00.740] rmnet_init: BAM devices[9]
- [ 0.750046 / 01-01 00:00:00.740] PPP generic driver version 2.4.2
- [ 0.750098 / 01-01 00:00:00.740] PPP BSD Compression module registered
- [ 0.750106 / 01-01 00:00:00.740] PPP Deflate Compression module registered
- [ 0.750920 / 01-01 00:00:00.740] PPP MPPE Compression module registered
- [ 0.750929 / 01-01 00:00:00.740] NET: Registered protocol family 24
- [ 0.750949 / 01-01 00:00:00.740] wcnss: wcnss_wlan_init()
- [ 0.751155 / 01-01 00:00:00.740] wcnss: wcnss_wlan_probe()
- [ 0.751163 / 01-01 00:00:00.740] wcnss_create_sysfs: Enter
- [ 0.751176 / 01-01 00:00:00.740] wcnss_wlan probed in built-in mode
- [ 0.751724 / 01-01 00:00:00.740] usbcore: registered new interface driver asix
- [ 0.751773 / 01-01 00:00:00.740] usbcore: registered new interface driver cdc_ether
- [ 0.751798 / 01-01 00:00:00.740] usbcore: registered new interface driver net1080
- [ 0.751828 / 01-01 00:00:00.740] usbcore: registered new interface driver cdc_subset
- [ 0.751852 / 01-01 00:00:00.740] usbcore: registered new interface driver zaurus
- [ 0.751919 / 01-01 00:00:00.740] usbcore: registered new interface driver cdc_ncm
- [ 0.999347 / 01-01 00:00:00.990] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.000137 / 01-01 00:00:00.990] usbcore: registered new interface driver cdc_acm
- [ 1.000145 / 01-01 00:00:00.990] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 1.000152 / 01-01 00:00:00.990] Initializing USB Mass Storage driver...
- [ 1.000181 / 01-01 00:00:00.990] usbcore: registered new interface driver usb-storage
- [ 1.000188 / 01-01 00:00:00.990] USB Mass Storage support registered.
- [ 1.000213 / 01-01 00:00:00.990] usbcore: registered new interface driver ums-alauda
- [ 1.000237 / 01-01 00:00:00.990] usbcore: registered new interface driver ums-cypress
- [ 1.000260 / 01-01 00:00:00.990] usbcore: registered new interface driver ums-datafab
- [ 1.000284 / 01-01 00:00:00.990] usbcore: registered new interface driver ums_eneub6250
- [ 1.000309 / 01-01 00:00:00.990] usbcore: registered new interface driver ums-freecom
- [ 1.000332 / 01-01 00:00:00.990] usbcore: registered new interface driver ums-isd200
- [ 1.000356 / 01-01 00:00:00.990] usbcore: registered new interface driver ums-jumpshot
- [ 1.000379 / 01-01 00:00:00.990] usbcore: registered new interface driver ums-karma
- [ 1.000403 / 01-01 00:00:00.990] usbcore: registered new interface driver ums-onetouch
- [ 1.000426 / 01-01 00:00:00.990] usbcore: registered new interface driver ums-sddr09
- [ 1.000450 / 01-01 00:00:00.990] usbcore: registered new interface driver ums-sddr55
- [ 1.000476 / 01-01 00:00:00.990] usbcore: registered new interface driver ums-usbat
- [ 1.000503 / 01-01 00:00:00.990] usbcore: registered new interface driver usb_ehset_test
- [ 1.000510 / 01-01 00:00:00.990] u_lgeusb init
- [ 1.000904 / 01-01 00:00:00.990] mbim_init: initialize 1 instances
- [ 1.000941 / 01-01 00:00:00.990] mbim_init: Initialized 1 ports
- [ 1.001630 / 01-01 00:00:00.990] rndis_qc_init: initialize rndis QC instance
- [ 1.001822 / 01-01 00:00:00.990] gadget: Mass Storage Function, version: 2009/09/11
- [ 1.001830 / 01-01 00:00:00.990] gadget: Number of LUNs=1
- [ 1.001837 / 01-01 00:00:00.990] lun0: LUN: removable file: (no medium)
- [ 1.001927 / 01-01 00:00:00.990] gadget: Mass Storage Function, version: 2009/09/11
- [ 1.001934 / 01-01 00:00:00.990] gadget: Number of LUNs=1
- [ 1.001941 / 01-01 00:00:00.990] clun0: LUN: removable read only CD-ROM file: (no medium)
- [ 1.002105 / 01-01 00:00:00.990] gadget: android_usb ready
- [ 1.003129 / 01-01 00:00:00.990] usbcore: registered new interface driver xpad
- [ 1.003236 / 01-01 00:00:00.990] [Touch] [get_dts_data]DT : ref_chk_option[0] = 0
- [ 1.003243 / 01-01 00:00:00.990] [Touch] [get_dts_data]DT : ref_chk_option[1] = 0
- [ 1.003250 / 01-01 00:00:00.990] [Touch] [get_dts_data]DT : ref_chk_option[2] = 1
- [ 1.003256 / 01-01 00:00:00.990] [Touch] [get_dts_data]DT : ref_chk_option[3] = 1
- [ 1.004003 / 01-01 00:00:00.990] using rtc device, qpnp_rtc, for alarms
- [ 1.004023 / 01-01 00:00:00.990] qcom,qpnp-rtc qpnp-rtc-e0519000: rtc core: registered qpnp_rtc as rtc0
- [ 1.004109 / 01-01 00:00:00.990] qcom,qpnp-rtc qpnp-rtc-e0519000: Probe success !!
- [ 1.004154 / 01-01 00:00:00.990] i2c /dev entries driver
- [ 1.004830 / 01-01 00:00:00.990] ocmem: Notifier registered for 1
- [ 1.005257 / 01-01 00:00:00.990] [Touch] power_state[1]
- [ 1.006291 / 01-01 00:00:01.000] msm_cci_probe: pdev e0558800 device id = -1
- [ 1.009473 / 01-01 00:00:01.000] msm_ois_platform_probe:185 Enter
- [ 1.009754 / 01-01 00:00:01.000] msm_proxy_init_module:797 Enter
- [ 1.009792 / 01-01 00:00:01.000] msm_proxy_platform_probe:694 Enter
- [ 1.009800 / 01-01 00:00:01.000] msm_proxy_platform_probe:703 cell-index 998, rc 0
- [ 1.009807 / 01-01 00:00:01.000] msm_proxy_platform_probe:711 qcom,cci-master 0, rc 0
- [ 1.009849 / 01-01 00:00:01.000] msm_proxy_platform_probe:760 Exit
- [ 1.010086 / 01-01 00:00:01.000] msm_proxy_init_module:801 Enter 0
- [ 1.010093 / 01-01 00:00:01.000] imx135_init_module E
- [ 1.010099 / 01-01 00:00:01.000] imx135_init_module: Sensor power is set
- [ 1.010348 / 01-01 00:00:01.000] imx135_platform_probe E
- [ 1.010356 / 01-01 00:00:01.000] msm_sensor_platform_probe: ENTER
- [ 1.010955 / 01-01 00:00:01.000] msm_sensor_power_up:1070 sensor_name imx135
- [ 1.040728 / 01-01 00:00:01.030] msm_sensor_power_up sensor_name imx135 exit
- [ 1.065591 / 01-01 00:00:01.060] input: touch_dev as /devices/virtual/input/input0
- [ 1.069834 / 01-01 00:00:01.060] [Touch] common[0P:0x01] finger[0P:0x12] sensor[3P:0x55] analog[1P:0x54] flash[0P:0x34]
- [ 1.070300 / 01-01 00:00:01.060] [Touch] f12_info.ctrl_reg_addr[8]=0x15
- [ 1.070307 / 01-01 00:00:01.060] [Touch] f12_info.ctrl_reg_addr[9]=0x16
- [ 1.070313 / 01-01 00:00:01.060] [Touch] f12_info.ctrl_reg_addr[10]=0x17
- [ 1.070320 / 01-01 00:00:01.060] [Touch] f12_info.ctrl_reg_addr[11]=0x18
- [ 1.070326 / 01-01 00:00:01.060] [Touch] f12_info.ctrl_reg_addr[15]=0x19
- [ 1.070332 / 01-01 00:00:01.060] [Touch] f12_info.ctrl_reg_addr[18]=0x1A
- [ 1.070338 / 01-01 00:00:01.060] [Touch] f12_info.ctrl_reg_addr[20]=0x1B
- [ 1.070345 / 01-01 00:00:01.060] [Touch] f12_info.ctrl_reg_addr[22]=0x1C
- [ 1.070352 / 01-01 00:00:01.060] [Touch] f12_info.ctrl_reg_addr[23]=0x1D
- [ 1.070359 / 01-01 00:00:01.060] [Touch] f12_info.ctrl_reg_addr[24]=0x1E
- [ 1.070365 / 01-01 00:00:01.060] [Touch] f12_info.ctrl_reg_addr[26]=0x1F
- [ 1.070371 / 01-01 00:00:01.060] [Touch] f12_info.ctrl_reg_addr[27]=0x20
- [ 1.070377 / 01-01 00:00:01.060] [Touch] f12_info.ctrl_reg_addr[28]=0x21
- [ 1.070383 / 01-01 00:00:01.060] [Touch] f12_info.data_reg_addr[1]=0x06
- [ 1.070389 / 01-01 00:00:01.060] [Touch] f12_info.data_reg_addr[2]=0x07
- [ 1.070395 / 01-01 00:00:01.060] [Touch] f12_info.data_reg_addr[4]=0x08
- [ 1.070401 / 01-01 00:00:01.060] [Touch] f12_info.data_reg_addr[15]=0x09
- [ 1.071358 / 01-01 00:00:01.060] [Touch] CUSTOMER_FAMILY_REG = 1
- [ 1.071365 / 01-01 00:00:01.060] [Touch] FW_REVISION_REG = 1
- [ 1.071374 / 01-01 00:00:01.060] [Touch] ts->fw_flag = 2
- [ 1.072357 / 01-01 00:00:01.060] [Touch] palm_ctrl_mode:0
- [ 1.072511 / 01-01 00:00:01.060] [Touch] lpwg_update_all : disable, irqctrl=0
- [ 1.072519 / 01-01 00:00:01.060] [Touch] set_doze_param: state:[1], [1] [60]
- [ 1.072904 / 01-01 00:00:01.060] [Touch] sleep_control : curr = [0] next[0]
- [ 1.075097 / 01-01 00:00:01.060] [Touch] report mode: 0
- [ 1.075253 / 01-01 00:00:01.060] [Touch] sleep_control : curr = [0] next[0]
- [ 1.075371 / 01-01 00:00:01.060] [Touch] lpwg_mode[0]
- [ 1.075550 / 01-01 00:00:01.070] [Touch] current_thermal_mode = THERMAL_LOW
- [ 1.075648 / 01-01 00:00:01.070] [Touch] interrupt_state[1]
- [ 1.075666 / 01-01 00:00:01.070] [Touch] n1[14] n2[26]
- [ 1.075712 / 01-01 00:00:01.070] [Touch] interrupt_state[0]
- [ 1.075721 / 01-01 00:00:01.070] [Touch] product_id[PLG313(ic):PLG313(fw)]
- [ 1.075729 / 01-01 00:00:01.070] [Touch] ic_fw_version[V1.26(0x30 0x05 0x51 0x9A)]
- [ 1.075737 / 01-01 00:00:01.070] [Touch] fw_version[V1.22(0x30 0x05 0x51 0x96)]
- [ 1.075745 / 01-01 00:00:01.070] [Touch] fw_version mismatch. ic_fw_version[3]:0x9A != fw_version[3]:0x96
- [ 1.075752 / 01-01 00:00:01.070] [Touch] FW: start-upgrade - need[1] rewrite[0]
- [ 1.075758 / 01-01 00:00:01.070] [Touch] probe done
- [ 1.075767 / 01-01 00:00:01.070] [Touch] FW: need_upgrade[1] force[0] force_cat[0] file[synaptics/g3_global_com/PLG313-V1.22-PR1653201-DS5.5.1.0.1066_30055196_S3528A1.img]
- [ 1.075869 / 01-01 00:00:01.070] [Touch]
- [ 1.075871 / 01-01 00:00:01.070] Initializing Reflash Process...
- [ 1.078501 / 01-01 00:00:01.070] [Touch] SynaReadFirmwareInfo
- [ 1.078931 / 01-01 00:00:01.070] [Touch E] [SynaReadFirmwareInfo 430] Read Product ID PLG313
- [ 1.079139 / 01-01 00:00:01.070] [Touch E] [SynaReadFirmwareInfo 434] Read Firmware Info 1701943
- [ 1.079619 / 01-01 00:00:01.070] [Touch] SynaEnableFlashing
- [ 1.079625 / 01-01 00:00:01.070] [Touch]
- [ 1.079628 / 01-01 00:00:01.070] Enable Reflash...
- [ 1.079965 / 01-01 00:00:01.070] [Touch E] [SynaReadBootloadID 448] SynaBootloadID = 13910
- [ 1.079974 / 01-01 00:00:01.070] [Touch E] [SynaWriteBootloadID 460] uData[0] = 56 uData[0] = 36
- [ 1.083704 / 01-01 00:00:01.070] [Touch E] [SynaBootloaderLock 298] Device already locked.
- [ 1.083712 / 01-01 00:00:01.070] [Touch E] [SynaProgramFirmware 671]
- [ 1.083716 / 01-01 00:00:01.070] Program Firmware Section...
- [ 1.083892 / 01-01 00:00:01.070] [Touch E] [SynaReadBootloadID 448] SynaBootloadID = 13910
- [ 1.083908 / 01-01 00:00:01.070] [Touch E] [SynaWriteBootloadID 460] uData[0] = 56 uData[0] = 36
- [ 1.118470 / 01-01 00:00:01.110] msm_sensor_platform_probe: read eeprom success
- [ 1.118478 / 01-01 00:00:01.110] msm_sensor_platform_probe imx135 probe succeeded
- [ 1.118622 / 01-01 00:00:01.110] msm_sensor_power_down:1251 sensor_name imx135
- [ 1.147561 / 01-01 00:00:01.140] msm_sensor_power_down:1316 sensor_name imx135 exit
- [ 1.147570 / 01-01 00:00:01.140] imx135_platform_probe: X, rc = 0
- [ 1.147589 / 01-01 00:00:01.140] imx135_init_module: X, rc = 0
- [ 1.147599 / 01-01 00:00:01.140] imx214_init_module E
- [ 1.147606 / 01-01 00:00:01.140] imx214_init_module: Sensor power is set
- [ 1.148038 / 01-01 00:00:01.140] imx208_init_module E
- [ 1.148046 / 01-01 00:00:01.140] imx208_init_module: Sensor power is set REV B
- [ 1.148312 / 01-01 00:00:01.140] imx208_platform_probe E
- [ 1.148320 / 01-01 00:00:01.140] msm_sensor_platform_probe: ENTER
- [ 1.148482 / 01-01 00:00:01.140] msm_sensor_power_up:1070 sensor_name imx208
- [ 1.286763 / 01-01 00:00:01.280] msm_sensor_power_up sensor_name imx208 exit
- [ 1.286772 / 01-01 00:00:01.280] msm_sensor_platform_probe imx208 probe succeeded
- [ 1.286903 / 01-01 00:00:01.280] msm_sensor_power_down:1251 sensor_name imx208
- [ 1.424095 / 01-01 00:00:01.410] msm_sensor_power_down:1316 sensor_name imx208 exit
- [ 1.424103 / 01-01 00:00:01.410] imx208_platform_probe: X, rc = 0
- [ 1.424119 / 01-01 00:00:01.410] imx208_init_module: X, rc = 0
- [ 1.425085 / 01-01 00:00:01.410] __msm_jpeg_init:947] Jpeg Device id 0
- [ 1.425180 / 01-01 00:00:01.410] __msm_jpeg_init:947] Jpeg Device id 1
- [ 1.425266 / 01-01 00:00:01.410] __msm_jpeg_init:947] Jpeg Device id 2
- [ 1.439747 / 01-01 00:00:01.430] MSM-CPP cpp_init_hardware:766 stream_cnt:0
- [ 1.440890 / 01-01 00:00:01.430] lirc_dev: IR Remote Control driver registered, major 230
- [ 1.440899 / 01-01 00:00:01.430] IR NEC protocol handler initialized
- [ 1.440907 / 01-01 00:00:01.430] IR RC5(x) protocol handler initialized
- [ 1.440914 / 01-01 00:00:01.430] IR RC6 protocol handler initialized
- [ 1.440921 / 01-01 00:00:01.430] IR JVC protocol handler initialized
- [ 1.440929 / 01-01 00:00:01.430] IR Sony protocol handler initialized
- [ 1.440936 / 01-01 00:00:01.430] IR RC5 (streamzap) protocol handler initialized
- [ 1.440944 / 01-01 00:00:01.430] IR SANYO protocol handler initialized
- [ 1.440951 / 01-01 00:00:01.430] IR MCE Keyboard/mouse protocol handler initialized
- [ 1.440958 / 01-01 00:00:01.430] IR LIRC bridge handler initialized
- [ 1.441012 / 01-01 00:00:01.430] usbcore: registered new interface driver uvcvideo
- [ 1.441020 / 01-01 00:00:01.430] USB Video Class driver (1.1.1)
- [ 1.441390 / 01-01 00:00:01.430] [MAX17048] probe : START
- [ 1.441399 / 01-01 00:00:01.430] [MAX17048] ac probe not yet!
- [ 1.441412 / 01-01 00:00:01.430] i2c 1-0036: Driver max17048 requests probe deferral
- [ 1.441431 / 01-01 00:00:01.430] i2c-core: driver [max17048] using legacy suspend method
- [ 1.441439 / 01-01 00:00:01.430] i2c-core: driver [max17048] using legacy resume method
- [ 1.441569 / 01-01 00:00:01.430] lge_battery_id lge_battery_id.0: lge_battery_id_probe: LGE Battery ID Checker
- [ 1.441703 / 01-01 00:00:01.430] bq24296_probe: bq24296 charger probe : start
- [ 1.441711 / 01-01 00:00:01.430] bq24296_probe: cable_type is = 12 factory_mode = 0
- [ 1.441722 / 01-01 00:00:01.430] bq24296_probe: cn supply not found deferring probe
- [ 1.441731 / 01-01 00:00:01.430] bq24296_probe: fail to probe
- [ 1.441741 / 01-01 00:00:01.430] i2c 1-006b: Driver bq24296 requests probe deferral
- [ 1.441758 / 01-01 00:00:01.430] i2c-core: driver [bq24296] using legacy suspend method
- [ 1.441766 / 01-01 00:00:01.430] i2c-core: driver [bq24296] using legacy resume method
- [ 1.441822 / 01-01 00:00:01.430] idtp9025_probe:
- [ 1.492171 / 01-01 00:00:01.480] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 1.492664 / 01-01 00:00:01.480] cpuidle: using governor ladder
- [ 1.492674 / 01-01 00:00:01.480] cpuidle: using governor menu
- [ 1.492698 / 01-01 00:00:01.480] sdhci: Secure Digital Host Controller Interface driver
- [ 1.492705 / 01-01 00:00:01.480] sdhci: Copyright(c) Pierre Ossman
- [ 1.492712 / 01-01 00:00:01.480] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 1.496570 / 01-01 00:00:01.490] mmc0: no vmmc regulator found
- [ 1.497703 / 01-01 00:00:01.490] [LGE][MMC][mmc_power_off ( )] host->index:0, already power-off, skip below
- [ 1.497723 / 01-01 00:00:01.490] [LGE][MMC][mmc_rescan ( ) START!] mmc0
- [ 1.497738 / 01-01 00:00:01.490] [LGE][MMC][mmc_power_off ( )] host->index:0, already power-off, skip below
- [ 1.497777 / 01-01 00:00:01.490] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
- [ 1.502106 / 01-01 00:00:01.490] mmc1: no vmmc regulator found
- [ 1.503216 / 01-01 00:00:01.490] [LGE][MMC][mmc_power_off ( )] host->index:1, already power-off, skip below
- [ 1.503233 / 01-01 00:00:01.490] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
- [ 1.505797 / 01-01 00:00:01.500] i2c-core: driver [lp5521] using legacy suspend method
- [ 1.505806 / 01-01 00:00:01.500] i2c-core: driver [lp5521] using legacy resume method
- [ 1.505845 / 01-01 00:00:01.500] max14688: max14688 attached
- [ 1.505852 / 01-01 00:00:01.500] max14688: wake_lock_init
- [ 1.506739 / 01-01 00:00:01.500] max14688: max14688_probe[pincontrol2 = 1]
- [ 1.506908 / 01-01 00:00:01.500] max14688: max14688_write_mode0[pincontrol1 = 0]
- [ 1.507203 / 01-01 00:00:01.500] max14688: max14688_write_mode1[pincontrol1 = 0]
- [ 1.507340 / 01-01 00:00:01.500] max14688: max14688_probe[me->irq_saved = 0]
- [ 1.507483 / 01-01 00:00:01.500] input: max14688 as /devices/f9967000.i2c/i2c-0/0-0015/input/input1
- [ 1.507928 / 01-01 00:00:01.500] max14688: MAX14688 I2C Driver 1.01 Installed
- [ 1.508097 / 01-01 00:00:01.500] max14688: chip id 01 rev 01
- [ 1.508265 / 01-01 00:00:01.500] max14688: max14688_update_status[status = 17]
- [ 1.508477 / 01-01 00:00:01.500] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1
- [ 1.508502 / 01-01 00:00:01.500] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
- [ 1.508510 / 01-01 00:00:01.500] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc5fc0000
- [ 1.508520 / 01-01 00:00:01.500] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
- [ 1.508528 / 01-01 00:00:01.500] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
- [ 1.508720 / 01-01 00:00:01.500] qce qcedev.0: Qualcomm Crypto 5.1.0 device found @0xfd440000
- [ 1.508730 / 01-01 00:00:01.500] qce qcedev.0: IO base, CE = 0xc5fc0000
- [ 1.508734 / 01-01 00:00:01.500] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
- [ 1.508738 / 01-01 00:00:01.500] IO base BAM = 0x0
- [ 1.508741 / 01-01 00:00:01.500] BAM IRQ 268
- [ 1.508744 / 01-01 00:00:01.500] Engines Availability = 0x1010853
- [ 1.508784 / 01-01 00:00:01.500] sps:BAM 0xfd444000 is registered.
- [ 1.508945 / 01-01 00:00:01.500] sps:BAM 0xfd444000 (va:0xc5d30000) enabled: ver:0x20, number of pipes:8
- [ 1.509142 / 01-01 00:00:01.500] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
- [ 1.510514 / 01-01 00:00:01.500] usbcore: registered new interface driver usbhid
- [ 1.510522 / 01-01 00:00:01.500] usbhid: USB HID core driver
- [ 1.510681 / 01-01 00:00:01.500] zram: Created 1 device(s) ...
- [ 1.510934 / 01-01 00:00:01.500] ashmem: initialized
- [ 1.510974 / 01-01 00:00:01.500] logger: created 256K log 'log_main'
- [ 1.511007 / 01-01 00:00:01.500] logger: created 256K log 'log_events'
- [ 1.511041 / 01-01 00:00:01.500] logger: created 256K log 'log_radio'
- [ 1.511075 / 01-01 00:00:01.500] logger: created 256K log 'log_system'
- [ 1.511535 / 01-01 00:00:01.500] sps:BAM 0xf9304000 is registered.
- [ 1.511554 / 01-01 00:00:01.500] sps:BAM 0xf9a44000 is registered.
- [ 1.511565 / 01-01 00:00:01.500] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
- [ 1.511772 / 01-01 00:00:01.500] qcom,qpnp-power-on qpnp-power-on-e0518000: PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'warm' boot
- [ 1.511794 / 01-01 00:00:01.500] qcom,qpnp-power-on qpnp-power-on-e0518000: PMIC@SID0: Power-off reason: Triggered from UVLO (Under Voltage Lock Out)
- [ 1.511908 / 01-01 00:00:01.500] input: qpnp_pon as /devices/virtual/input/input2
- [ 1.512536 / 01-01 00:00:01.500] qpnp_coincell_charger_show_state: enabled=Y, voltage=3000 mV, resistance=2100 ohm
- [ 1.512638 / 01-01 00:00:01.500] PMIC@SID4: PM8841 v2.1 options: 0, 0, 2, 2
- [ 1.512707 / 01-01 00:00:01.500] PMIC@SID0: PM8941 v3.1 options: 0, 0, 0, 0
- [ 1.513138 / 01-01 00:00:01.500] coresight-fuse fc4be024.fuse: Fuse initialized
- [ 1.513387 / 01-01 00:00:01.500] coresight-cti: probe of fc308000.cti failed with error -1
- [ 1.513407 / 01-01 00:00:01.500] coresight-cti: probe of fc309000.cti failed with error -1
- [ 1.513426 / 01-01 00:00:01.500] coresight-cti: probe of fc30a000.cti failed with error -1
- [ 1.513444 / 01-01 00:00:01.500] coresight-cti: probe of fc30b000.cti failed with error -1
- [ 1.513463 / 01-01 00:00:01.500] coresight-cti: probe of fc30c000.cti failed with error -1
- [ 1.513482 / 01-01 00:00:01.500] coresight-cti: probe of fc30d000.cti failed with error -1
- [ 1.513500 / 01-01 00:00:01.500] coresight-cti: probe of fc30e000.cti failed with error -1
- [ 1.513518 / 01-01 00:00:01.500] coresight-cti: probe of fc30f000.cti failed with error -1
- [ 1.513536 / 01-01 00:00:01.500] coresight-cti: probe of fc310000.cti failed with error -1
- [ 1.513554 / 01-01 00:00:01.500] coresight-cti: probe of fc340000.cti failed with error -1
- [ 1.513573 / 01-01 00:00:01.500] coresight-cti: probe of fc341000.cti failed with error -1
- [ 1.513592 / 01-01 00:00:01.500] coresight-cti: probe of fc342000.cti failed with error -1
- [ 1.513612 / 01-01 00:00:01.500] coresight-cti: probe of fc343000.cti failed with error -1
- [ 1.513630 / 01-01 00:00:01.500] coresight-cti: probe of fc344000.cti failed with error -1
- [ 1.513649 / 01-01 00:00:01.500] coresight-cti: probe of fc348000.cti failed with error -1
- [ 1.513667 / 01-01 00:00:01.500] coresight-cti: probe of fc34d000.cti failed with error -1
- [ 1.513687 / 01-01 00:00:01.500] coresight-cti: probe of fc350000.cti failed with error -1
- [ 1.513705 / 01-01 00:00:01.500] coresight-cti: probe of fc354000.cti failed with error -1
- [ 1.513723 / 01-01 00:00:01.500] coresight-cti: probe of fc358000.cti failed with error -1
- [ 1.513968 / 01-01 00:00:01.500] coresight-csr: probe of fc302000.csr failed with error -1
- [ 1.514224 / 01-01 00:00:01.500] coresight-tmc: probe of fc322000.tmc failed with error -1
- [ 1.514243 / 01-01 00:00:01.500] coresight-tmc: probe of fc307000.tmc failed with error -1
- [ 1.514502 / 01-01 00:00:01.500] coresight-tpiu: probe of fc318000.tpiu failed with error -1
- [ 1.514766 / 01-01 00:00:01.500] coresight-funnel: probe of fc31b000.funnel failed with error -1
- [ 1.514785 / 01-01 00:00:01.500] coresight-funnel: probe of fc319000.funnel failed with error -1
- [ 1.514804 / 01-01 00:00:01.500] coresight-funnel: probe of fc31a000.funnel failed with error -1
- [ 1.514823 / 01-01 00:00:01.500] coresight-funnel: probe of fc345000.funnel failed with error -1
- [ 1.514841 / 01-01 00:00:01.500] coresight-funnel: probe of fc364000.funnel failed with error -1
- [ 1.515101 / 01-01 00:00:01.500] coresight-replicator: probe of fc31c000.replicator failed with error -1
- [ 1.515374 / 01-01 00:00:01.500] coresight-stm: probe of fc321000.stm failed with error -1
- [ 1.515674 / 01-01 00:00:01.510] coresight-hwevent: probe of fdf30018.hwevent failed with error -1
- [ 1.515931 / 01-01 00:00:01.510] coresight-etm: probe of fc33c000.etm failed with error -1
- [ 1.515950 / 01-01 00:00:01.510] coresight-etm: probe of fc33d000.etm failed with error -1
- [ 1.515968 / 01-01 00:00:01.510] coresight-etm: probe of fc33e000.etm failed with error -1
- [ 1.515986 / 01-01 00:00:01.510] coresight-etm: probe of fc33f000.etm failed with error -1
- [ 1.516276 / 01-01 00:00:01.510] coresight-audio-etm audio_etm0.1: Audio ETM initialized
- [ 1.516577 / 01-01 00:00:01.510] coresight-modem-etm modem_etm0.2: Modem ETM initialized
- [ 1.516873 / 01-01 00:00:01.510] coresight-wcn-etm wcn_etm0.3: Wireless ETM initialized
- [ 1.517172 / 01-01 00:00:01.510] coresight-rpm-etm rpm_etm0.4: RPM ETM initialized
- [ 1.517522 / 01-01 00:00:01.510] usbcore: registered new interface driver snd-usb-audio
- [ 1.583266 / 01-01 00:00:01.570] cs35l32 0-0041: Cirrus Logic CS35L32, Revision: A0
- [ 1.589789 / 01-01 00:00:01.580] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
- [ 1.590241 / 01-01 00:00:01.580] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
- [ 1.590816 / 01-01 00:00:01.580] platform qcom,msm-voip-dsp.51: Driver msm-voip-dsp requests probe deferral
- [ 1.591107 / 01-01 00:00:01.580] platform qcom,msm-pcm-voice.52: Driver msm-pcm-voice requests probe deferral
- [ 1.596089 / 01-01 00:00:01.590] ocmem: Notifier registered for 5
- [ 1.596555 / 01-01 00:00:01.590] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- [ 1.596627 / 01-01 00:00:01.590] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
- [ 1.597657 / 01-01 00:00:01.590] oprofile: using arm/armv7-krait
- [ 1.597709 / 01-01 00:00:01.590] GACT probability on
- [ 1.597723 / 01-01 00:00:01.590] Mirror/redirect action on
- [ 1.597731 / 01-01 00:00:01.590] Simple TC action Loaded
- [ 1.597927 / 01-01 00:00:01.590] netem: version 1.3
- [ 1.597937 / 01-01 00:00:01.590] u32 classifier
- [ 1.597944 / 01-01 00:00:01.590] Performance counters on
- [ 1.597950 / 01-01 00:00:01.590] input device check on
- [ 1.597956 / 01-01 00:00:01.590] Actions configured
- [ 1.597969 / 01-01 00:00:01.590] Netfilter messages via NETLINK v0.30.
- [ 1.598012 / 01-01 00:00:01.590] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 1.598268 / 01-01 00:00:01.590] ctnetlink v0.93: registering with nfnetlink.
- [ 1.598296 / 01-01 00:00:01.590] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 1.598304 / 01-01 00:00:01.590] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 1.598403 / 01-01 00:00:01.590] xt_time: kernel timezone is -0000
- [ 1.598595 / 01-01 00:00:01.590] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.598683 / 01-01 00:00:01.590] arp_tables: (C) 2002 David S. Miller
- [ 1.598714 / 01-01 00:00:01.590] TCP: cubic registered
- [ 1.598722 / 01-01 00:00:01.590] Initializing XFRM netlink socket
- [ 1.598918 / 01-01 00:00:01.590] NET: Registered protocol family 10
- [ 1.600072 / 01-01 00:00:01.590] Mobile IPv6
- [ 1.600093 / 01-01 00:00:01.590] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.600165 / 01-01 00:00:01.590] IPv6 over IPv4 tunneling driver
- [ 1.600365 / 01-01 00:00:01.590] NET: Registered protocol family 17
- [ 1.600386 / 01-01 00:00:01.590] NET: Registered protocol family 15
- [ 1.600418 / 01-01 00:00:01.590] Bridge firewalling registered
- [ 1.600430 / 01-01 00:00:01.590] Ebtables v2.0 registered
- [ 1.600584 / 01-01 00:00:01.590] Bluetooth: RFCOMM TTY layer initialized
- [ 1.600603 / 01-01 00:00:01.590] Bluetooth: RFCOMM socket layer initialized
- [ 1.600610 / 01-01 00:00:01.590] Bluetooth: RFCOMM ver 1.11
- [ 1.600617 / 01-01 00:00:01.590] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 1.600624 / 01-01 00:00:01.590] Bluetooth: BNEP filters: protocol multicast
- [ 1.600633 / 01-01 00:00:01.590] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 1.600696 / 01-01 00:00:01.590] L2TP core driver, V2.0
- [ 1.600710 / 01-01 00:00:01.590] PPPoL2TP kernel driver, V2.0
- [ 1.601248 / 01-01 00:00:01.590] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 1
- [ 1.601271 / 01-01 00:00:01.590] Registering SWP/SWPB emulation handler
- [ 1.612853 / 01-01 00:00:01.600] gdsc_oxili_gx: disabling
- [ 1.612875 / 01-01 00:00:01.600] gdsc_venus: disabling
- [ 1.613320 / 01-01 00:00:01.600] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- [ 1.613420 / 01-01 00:00:01.600] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
- [ 1.613947 / 01-01 00:00:01.600] bq24296_probe: bq24296 charger probe : start
- [ 1.613956 / 01-01 00:00:01.600] bq24296_probe: cable_type is = 12 factory_mode = 0
- [ 1.614013 / 01-01 00:00:01.600] bq24296_parse_dt: ext_chg_en = 440
- [ 1.614034 / 01-01 00:00:01.600] bq24296_parse_dt: otg_en = 442
- [ 1.614041 / 01-01 00:00:01.600] bq24296_parse_dt: watchdog-en = disabled
- [ 1.614586 / 01-01 00:00:01.600] input: gpio-keys as /devices/gpio_keys.83/input/input3
- [ 1.614869 / 01-04 14:02:53.500] qcom,qpnp-rtc qpnp-rtc-e0519000: setting system clock to 1970-01-04 14:02:53 UTC (309773)
- [ 1.615375 / 01-04 14:02:53.500] [WLC] unified_wlc_probe : probe start
- [ 1.615419 / 01-04 14:02:53.500] ============ not found external power supply ============
- [ 1.615431 / 01-04 14:02:53.500] platform unified_wlc.87: Driver unified_wlc requests probe deferral
- [ 1.618433 / 01-04 14:02:53.500] lge_pm_get_cable_info : acc_read_value - 1787852
- [ 1.618441 / 01-04 14:02:53.500]
- [ 1.618444 / 01-04 14:02:53.500]
- [ 1.618446 / 01-04 14:02:53.500] [PM] Cable detected: 1787852(OPEN)(2000, 500)
- [ 1.618450 / 01-04 14:02:53.500]
- [ 1.618545 / 01-04 14:02:53.500] bq24296_set_input_vin_limit: req_vin = 4520 set_vin = 4520 reg_val = 0x40
- [ 1.619429 / 01-04 14:02:53.500] bq24296_set_input_i_limit: input current limit=2000 setting 0x06
- [ 1.620202 / 01-04 14:02:53.500] bq24296_set_system_vmin: req_vmin = 3600 set_vmin = 3600 reg_val = 0x0c
- [ 1.620984 / 01-04 14:02:53.500] bq24296_enable_charging: enable=1
- [ 1.621755 / 01-04 14:02:53.500] bq24296_set_ibat_max: req_ibat = 1500 set_ibat = 1472 reg_val = 0x3c
- [ 1.623297 / 01-04 14:02:53.500] bq24296_set_prechg_i_limit: req_i = 512 set_i = 512 reg_val = 0x30
- [ 1.624074 / 01-04 14:02:53.500] bq24296_set_term_current: req_i = 128 set_i = 128 reg_val = 0x00
- [ 1.624850 / 01-04 14:02:53.500] bq24296_set_vbat_max: req_vbat = 4352 set_vbat = 4352 reg_val = 0xd4
- [ 1.625630 / 01-04 14:02:53.510] bq24296_set_chg_term: enable=1
- [ 1.626409 / 01-04 14:02:53.510] bq24296_set_chg_timer: enable=1
- [ 1.627186 / 01-04 14:02:53.510] bq24296_set_chg_timeout: req_chg_timeout set_h = 8hrs
- [ 1.634418 / 01-04 14:02:53.510] mmc0: BKOPS_EN bit = 1
- [ 1.641489 / 01-04 14:02:53.520] bq24296_power_get_property: get charger_timeout : 1[D]
- [ 1.641515 / 01-04 14:02:53.520] bq24296_probe: Battery was read in sbl is = 94
- [ 1.641564 / 01-04 14:02:53.520] bq24296_batt_external_power_changed: dwc3 result=0mA
- [ 1.641572 / 01-04 14:02:53.520] bq24296_set_input_i_limit: input current limit=0 setting 0x00
- [ 1.644242 / 01-04 14:02:53.520] bq24296_enable_charging: enable=1
- [ 1.644325 / 01-04 14:02:53.520] bq24296_batt_external_power_changed: dwc3 result=0mA
- [ 1.644334 / 01-04 14:02:53.520] bq24296_set_input_i_limit: input current limit=0 setting 0x00
- [ 1.644696 / 01-04 14:02:53.520] _psy_check_ext: psp is not found wireless
- [ 1.644706 / 01-04 14:02:53.520] bq24296_decide_otg_mode: FATAL (bq24296_decide_otg_mode)
- [ 1.644713 / 01-04 14:02:53.520] bq24296_set_input_vin_limit: req_vin = 4520 set_vin = 4520 reg_val = 0x40
- [ 1.646420 / 01-04 14:02:53.530] bq24296_probe: bq24296 charger probe : success
- [ 1.646463 / 01-04 14:02:53.530] [MAX17048] probe : START
- [ 1.646518 / 01-04 14:02:53.530] max17048_parse_dt : Get alert_gpio 9
- [ 1.646527 / 01-04 14:02:53.530] [MAX17048] platform data : rcomp = 55, temp_co_hot = 637, temp_co_cold = 4525, alert_threshold = 0x2, full_design = 3000, empty = 0
- [ 1.647794 / 01-04 14:02:53.530] max17048 1-0036: MAX17048 Fuel-Gauge Ver 0x12
- [ 1.649159 / 01-04 14:02:53.530] _psy_check_ext: psp is not found wireless
- [ 1.649173 / 01-04 14:02:53.530] bq24296_decide_otg_mode: FATAL (bq24296_decide_otg_mode)
- [ 1.649928 / 01-04 14:02:53.530] clock_late_init: Removing enables held for handed-off clocks
- [ 1.651268 / 01-04 14:02:53.530] bq24296_set_input_vin_limit: req_vin = 4520 set_vin = 4520 reg_val = 0x40
- [ 1.652632 / 01-04 14:02:53.530] max17048_get_status : status = 0x20ff
- [ 1.657158 / 01-04 14:02:53.540] max17048_get_config : config = 0x337e
- [ 1.660118 / 01-04 14:02:53.540] HSD.max1462x[lge_hsd_init : 720]enter
- [ 1.660332 / 01-04 14:02:53.540] HSD.max1462x[lge_hsd_init : 727]wake_lock_init
- [ 1.660910 / 01-04 14:02:53.540] ext_amp_init enter
- [ 1.661227 / 01-04 14:02:53.540] ALSA device list:
- [ 1.661234 / 01-04 14:02:53.540] No soundcards found.
- [ 1.661399 / 01-04 14:02:53.540] bq24296_power_get_property: get charger_timeout : 1[D]
- [ 1.661461 / 01-04 14:02:53.540] [BOOT_CAUSE] 128, warm_reset = 1
- [ 1.661494 / 01-04 14:02:53.540] [SMPL_CNT] ===> write() : fd is 3
- [ 1.661530 / 01-04 14:02:53.540] [SMPL_CNT] ===> not smpl boot!!!!!
- [ 1.661556 / 01-04 14:02:53.540] Freeing init memory: 52K
- [ 1.665173 / 01-04 14:02:53.540] max17048_set_rcomp_by_temperature : temp = 28, pre_rcomp = 0x33 -> new_rcomp = 0x32
- [ 1.665702 / 01-04 14:02:53.550] max17048_set_athd_alert.
- [ 1.665710 / 01-04 14:02:53.550] max17048_set_alsc_alert. with 1
- [ 1.666395 / 01-04 14:02:53.550] max17048_get_config : config = 0x327e
- [ 1.666922 / 01-04 14:02:53.550] max17048_get_status : status = 0x20ff
- [ 1.667975 / 01-04 14:02:53.550] max17048_work : Raw SOC : 0x8463 / vcell : 0xbea
- [ 1.667984 / 01-04 14:02:53.550] max17048_work : Reported Capacity : 70 / voltage : 3812
- [ 1.668015 / 01-04 14:02:53.550] max17048_clear_interrupt.
- [ 1.670935 / 01-04 14:02:53.550] [MAX17048] probe : DONE
- [ 1.675364 / 01-04 14:02:53.550] mmc0: new HS400 MMC card at address 0001
- [ 1.675375 / 01-04 14:02:53.550] [LGE][MMC][mmc_add_card ( )] mmc_hostname:mmc0, type:MMC
- [ 1.675771 / 01-04 14:02:53.560] mmcblk0: mmc0:0001 SDW32G 29.1 GiB
- [ 1.675902 / 01-04 14:02:53.560] mmcblk0rpmb: mmc0:0001 SDW32G partition 3 4.00 MiB
- [ 1.677950 / 01-04 14:02:53.560] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44
- [ 1.679962 / 01-04 14:02:53.560] [LGE][MMC][mmc_add_card ( )] device_add & uevent posting complete!
- [ 1.687522 / 01-04 14:02:53.570] [LGE][MMC][mmc_rescan ( ) START!] mmc1
- [ 1.687540 / 01-04 14:02:53.570] [LGE][MMC][mmc_power_off ( )] host->index:1, already power-off, skip below
- [ 1.693661 / 01-04 14:02:53.570]
- [ 1.693665 / 01-04 14:02:53.570] Battery inserted!!!
- [ 1.693668 / 01-04 14:02:53.570]
- [ 1.693739 / 01-04 14:02:53.570] bif_ctrl_register: Battery pack present = Y
- [ 1.698298 / 01-04 14:02:53.580] bif_ctrl_register: Battery pack type = smart (Rid=291456 ohm)
- [ 1.698817 / 01-04 14:02:53.580] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- [ 1.699018 / 01-04 14:02:53.580] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
- [ 1.699193 / 01-04 14:02:53.580] [WLC] unified_wlc_probe : probe start
- [ 1.699237 / 01-04 14:02:53.580] ============ psy ac supply found[ac] ============
- [ 1.699293 / 01-04 14:02:53.580] pm_power_get_property_wireless : POWER_SUPPLY_PROP_WIRELESS_CHARGER_SWITCH : 0
- [ 1.699341 / 01-04 14:02:53.580] bq24296_batt_external_power_changed: dwc3 result=0mA
- [ 1.699351 / 01-04 14:02:53.580] bq24296_set_input_i_limit: input current limit=0 setting 0x00
- [ 1.699403 / 01-04 14:02:53.580] [WLC] unified_wlc_probe : wlc_int_gpio = 441.
- [ 1.699413 / 01-04 14:02:53.580] [WLC] unified_wlc_probe : wlc_full_chg = 443.
- [ 1.699421 / 01-04 14:02:53.580] [WLC] unified_wlc_hw_init
- [ 1.699845 / 01-04 14:02:53.580] [WLC] unified_wlc_probe : probe done
- [ 1.700091 / 01-04 14:02:53.580] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- [ 1.700288 / 01-04 14:02:53.580] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
- [ 1.700576 / 01-04 14:02:53.580] _psy_check_ext: psp is not found wireless
- [ 1.700600 / 01-04 14:02:53.580] pm_power_get_event_property_wireless : POWER_SUPPLY_PROP_WIRELESS_ONLINE :0
- [ 1.700611 / 01-04 14:02:53.580] bq24296_set_input_vin_limit: req_vin = 4520 set_vin = 4520 reg_val = 0x40
- [ 1.701396 / 01-04 14:02:53.580] pm_power_get_property_wireless : POWER_SUPPLY_PROP_WIRELESS_CHARGER_SWITCH : 0
- [ 1.764543 / 01-04 14:02:53.640] msm-dwc3 msm_dwc3: DWC3 in low power mode
- [ 1.919806 / 01-04 14:02:53.800] type=1403 audit(309773.800:2): policy loaded auid=4294967295 ses=4294967295
- [ 1.919956 / 01-04 14:02:53.800] SELinux: Loaded policy from /sepolicy
- [ 1.921501 / 01-04 14:02:53.800] type=1404 audit(309773.800:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- [ 1.942581 / 01-04 14:02:53.820] mmc1: new ultra high speed DDR50 SDHC card at address aaaa
- [ 1.942589 / 01-04 14:02:53.820] [LGE][MMC][mmc_add_card ( )] mmc_hostname:mmc1, type:SDHC
- [ 1.942888 / 01-04 14:02:53.820] mmcblk1: mmc1:aaaa SL32G 29.7 GiB
- [ 1.964301 / 01-04 14:02:53.840] mmcblk1: p1
- [ 1.964957 / 01-04 14:02:53.840] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- [ 1.965155 / 01-04 14:02:53.840] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
- [ 1.965234 / 01-04 14:02:53.840] [LGE][MMC][mmc_add_card ( )] device_add & uevent posting complete!
- [ 3.053338 / 01-04 14:02:54.930] [Touch E] [SynaFlashFirmwareWrite 604] blk 0 / 5824
- [ 3.178553 / 01-04 14:02:55.060] [Touch E] [SynaFlashFirmwareWrite 604] blk 100 / 5824
- [ 3.303760 / 01-04 14:02:55.180] [Touch E] [SynaFlashFirmwareWrite 604] blk 200 / 5824
- [ 3.428953 / 01-04 14:02:55.310] [Touch E] [SynaFlashFirmwareWrite 604] blk 300 / 5824
- [ 3.554128 / 01-04 14:02:55.430] [Touch E] [SynaFlashFirmwareWrite 604] blk 400 / 5824
- [ 3.645526 / 01-04 14:02:55.530] bq24296_irq_worker: bq24296_irq_worker : occured
- [ 3.646417 / 01-04 14:02:55.530] bq24296_irq_worker: 08:0x00, 09:0x00
- [ 3.646426 / 01-04 14:02:55.530] bq24296_irq_worker: not charging!
- [ 3.646888 / 01-04 14:02:55.530] pm_power_get_event_property_wireless : POWER_SUPPLY_PROP_WIRELESS_ONLINE :0
- [ 3.651281 / 01-04 14:02:55.530] bq24296_irq_worker: [IRQ_WORKER] plug out, vin:293440
- [ 3.679890 / 01-04 14:02:55.560] [Touch E] [SynaFlashFirmwareWrite 604] blk 500 / 5824
- [ 3.805215 / 01-04 14:02:55.680] [Touch E] [SynaFlashFirmwareWrite 604] blk 600 / 5824
- [ 3.930465 / 01-04 14:02:55.810] [Touch E] [SynaFlashFirmwareWrite 604] blk 700 / 5824
- [ 4.055649 / 01-04 14:02:55.940] [Touch E] [SynaFlashFirmwareWrite 604] blk 800 / 5824
- [ 4.180782 / 01-04 14:02:56.060] [Touch E] [SynaFlashFirmwareWrite 604] blk 900 / 5824
- [ 4.305921 / 01-04 14:02:56.190] [Touch E] [SynaFlashFirmwareWrite 604] blk 1000 / 5824
- [ 4.431047 / 01-04 14:02:56.310] [Touch E] [SynaFlashFirmwareWrite 604] blk 1100 / 5824
- [ 4.556225 / 01-04 14:02:56.440] [Touch E] [SynaFlashFirmwareWrite 604] blk 1200 / 5824
- [ 4.617083 / 01-04 14:02:56.500] init: could not import file '/init.recovery.g3.rc' from '/init.rc'
- [ 4.619273 / 01-04 14:02:56.500] healthd: wakealarm_init: timerfd_create failed
- [ 4.655991 / 01-04 14:02:56.540] bq24296_power_get_property: get charger_timeout : 1[D]
- [ 4.665053 / 01-04 14:02:56.540] pm_power_get_property_wireless : POWER_SUPPLY_PROP_WIRELESS_CHARGER_SWITCH : 0
- [ 4.685584 / 01-04 14:02:56.570] [Touch E] [SynaFlashFirmwareWrite 604] blk 1300 / 5824
- [ 4.800678 / 01-04 14:02:56.680] init: cannot open '/initlogo.rle'
- [ 4.802417 / 01-04 14:02:56.680] android_usb android0: gadget enable(0)
- [ 4.802429 / 01-04 14:02:56.680] android_usb: already disabled
- [ 4.802551 / 01-04 14:02:56.680] android_usb android0: request function list: adb
- [ 4.802563 / 01-04 14:02:56.680] func:adb is enabled.
- [ 4.803066 / 01-04 14:02:56.680] init: Unable to open persistent property directory /data/property errno: 2
- [ 4.804311 / 01-04 14:02:56.680] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
- [ 4.804326 / 01-04 14:02:56.680] init: powerctl: cannot expand '${sys.powerctl}'
- [ 4.804379 / 01-04 14:02:56.680] android_usb android0: gadget enable(0)
- [ 4.804670 / 01-04 14:02:56.680] android_usb android0: gadget enable(1)
- [ 4.804675 / 01-04 14:02:56.680] healthd: wakealarm_init: timerfd_create failed
- [ 4.805711 / 01-04 14:02:56.690] adb_open
- [ 4.811977 / 01-04 14:02:56.690] [Touch E] [SynaFlashFirmwareWrite 604] blk 1400 / 5824
- [ 4.812357 / 01-04 14:02:56.690] lm3697_lcd_backlight_set_level: backlight level from table 255 -> 2027
- [ 4.815059 / 01-04 14:02:56.690] mdss_fb_blank_sub: fb0 UNBLANK +
- [ 4.815069 / 01-04 14:02:56.690] mdss_mdp_overlay_on: fb0 UNBLANK +
- [ 4.815077 / 01-04 14:02:56.690] mdss_mdp_overlay_on: fb0 UNBLANK -
- [ 4.815085 / 01-04 14:02:56.690] mdss_fb_blank_sub: fb0 UNBLANK -
- [ 4.818908 / 01-04 14:02:56.700] mdss_dsi_on:400 Panel already on.
- [ 4.818914 / 01-04 14:02:56.700] mdss_dsi_unblank+:
- [ 4.818918 / 01-04 14:02:56.700] mdss_dsi_unblank-:
- [ 4.818922 / 01-04 14:02:56.700] mdss_dsi_on:400 Panel already on.
- [ 4.818933 / 01-04 14:02:56.700] mdss_dsi_unblank+:
- [ 4.818942 / 01-04 14:02:56.700] mdss_dsi_unblank-:
- [ 4.829219 / 01-04 14:02:56.710] mdss_mdp_pipe_init: no 2 type pipes available
- [ 4.940435 / 01-04 14:02:56.820] [Touch E] [SynaFlashFirmwareWrite 604] blk 1500 / 5824
- [ 5.067066 / 01-04 14:02:56.950] [Touch E] [SynaFlashFirmwareWrite 604] blk 1600 / 5824
- [ 5.197266 / 01-04 14:02:57.080] EXT4-fs (mmcblk0p43): 1 orphan inode deleted
- [ 5.197274 / 01-04 14:02:57.080] EXT4-fs (mmcblk0p43): recovery complete
- [ 5.199719 / 01-04 14:02:57.080] [Touch E] [SynaFlashFirmwareWrite 604] blk 1700 / 5824
- [ 5.208175 / 01-04 14:02:57.090] EXT4-fs (mmcblk0p43): mounted filesystem with ordered data mode. Opts:
- [ 5.218557 / 01-04 14:02:57.100] SELinux: Context u:object_r:media_rw_data_file:s0 is not valid (left unmapped).
- [ 5.221683 / 01-04 14:02:57.100] android_usb android0: gadget enable(0)
- [ 5.221702 / 01-04 14:02:57.100] dwc3 f9200000.dwc3: request c212fb00 was not queued to ep0out
- [ 5.221765 / 01-04 14:02:57.100] adb_release
- [ 5.222121 / 01-04 14:02:57.100] android_usb android0: gadget enable(0)
- [ 5.222162 / 01-04 14:02:57.100] android_usb android0: request function list: adb
- [ 5.222174 / 01-04 14:02:57.100] func:adb is enabled.
- [ 5.222212 / 01-04 14:02:57.100] android_usb android0: gadget enable(1)
- [ 5.241234 / 01-04 14:02:57.120] EXT4-fs (mmcblk0p43): mounted filesystem with ordered data mode. Opts:
- [ 5.254129 / 01-04 14:02:57.130] android_usb android0: gadget enable(0)
- [ 5.254143 / 01-04 14:02:57.130] dwc3 f9200000.dwc3: request c212fb00 was not queued to ep0out
- [ 5.254501 / 01-04 14:02:57.130] android_usb android0: gadget enable(0)
- [ 5.254542 / 01-04 14:02:57.130] android_usb android0: request function list: adb
- [ 5.254552 / 01-04 14:02:57.130] func:adb is enabled.
- [ 5.254591 / 01-04 14:02:57.130] android_usb android0: gadget enable(1)
- [ 5.254767 / 01-04 14:02:57.130] dwc3 f9200000.dwc3: request c212fb00 was not queued to ep0out
- [ 5.273220 / 01-04 14:02:57.150] EXT4-fs (mmcblk0p43): mounted filesystem with ordered data mode. Opts:
- [ 5.296483 / 01-04 14:02:57.180] EXT4-fs (mmcblk0p41): mounted filesystem with ordered data mode. Opts:
- [ 5.307858 / 01-04 14:02:57.190] EXT4-fs (mmcblk0p40): mounted filesystem with ordered data mode. Opts:
- [ 5.313829 / 01-04 14:02:57.190] SELinux: Context u:object_r:dontpanic_data_file:s0 is not valid (left unmapped).
- [ 5.315710 / 01-04 14:02:57.200] SELinux: Context u:object_r:adb_keys_file:s0 is not valid (left unmapped).
- [ 5.318206 / 01-04 14:02:57.200] SELinux: Context u:object_r:keychain_data_file:s0 is not valid (left unmapped).
- [ 5.318929 / 01-04 14:02:57.200] SELinux: Context u:object_r:net_data_file:s0 is not valid (left unmapped).
- [ 5.321378 / 01-04 14:02:57.200] SELinux: Context u:object_r:zoneinfo_data_file:s0 is not valid (left unmapped).
- [ 5.321521 / 01-04 14:02:57.200] SELinux: Context u:object_r:shared_relro_file:s0 is not valid (left unmapped).
- [ 5.321849 / 01-04 14:02:57.200] [Touch E] [SynaFlashFirmwareWrite 604] blk 1800 / 5824
- [ 5.324664 / 01-04 14:02:57.200] SELinux: Context u:object_r:misc_user_data_file:s0 is not valid (left unmapped).
- [ 5.324921 / 01-04 14:02:57.200] SELinux: Context u:object_r:media_data_file:s0 is not valid (left unmapped).
- [ 5.325082 / 01-04 14:02:57.200] SELinux: Context u:object_r:audio_data_file:s0 is not valid (left unmapped).
- [ 5.326854 / 01-04 14:02:57.210] SELinux: Context u:object_r:location_data_file:s0 is not valid (left unmapped).
- [ 5.328756 / 01-04 14:02:57.210] SELinux: Context u:object_r:sensors_data_file:s0 is not valid (left unmapped).
- [ 5.333858 / 01-04 14:02:57.210] SELinux: Context u:object_r:system_app_data_file:s0 is not valid (left unmapped).
- [ 5.444117 / 01-04 14:02:57.320] [Touch E] [SynaFlashFirmwareWrite 604] blk 1900 / 5824
- [ 5.566314 / 01-04 14:02:57.450] [Touch E] [SynaFlashFirmwareWrite 604] blk 2000 / 5824
- [ 5.678270 / 01-04 14:02:57.560] SELinux: Context u:object_r:location_app_data_file:s0 is not valid (left unmapped).
- [ 5.688454 / 01-04 14:02:57.570] [Touch E] [SynaFlashFirmwareWrite 604] blk 2100 / 5824
- [ 5.810626 / 01-04 14:02:57.690] [Touch E] [SynaFlashFirmwareWrite 604] blk 2200 / 5824
- [ 5.932811 / 01-04 14:02:57.810] [Touch E] [SynaFlashFirmwareWrite 604] blk 2300 / 5824
- [ 6.054840 / 01-04 14:02:57.930] [Touch E] [SynaFlashFirmwareWrite 604] blk 2400 / 5824
- [ 6.071898 / 01-04 14:02:57.950] SELinux: Context u:object_r:property_data_file:s0 is not valid (left unmapped).
- [ 6.075980 / 01-04 14:02:57.960] SELinux: Context u:object_r:dalvikcache_profiles_data_file:s0 is not valid (left unmapped).
- [ 6.092233 / 01-04 14:02:57.970] SELinux: Context u:object_r:resourcecache_data_file:s0 is not valid (left unmapped).
- [ 6.096727 / 01-04 14:02:57.980] SELinux: Context u:object_r:cnd_data_file:s0 is not valid (left unmapped).
- [ 6.099727 / 01-04 14:02:57.980] SELinux: Context u:object_r:lgmdm_data_file:s0 is not valid (left unmapped).
- [ 6.107893 / 01-04 14:02:57.990] SELinux: Context u:object_r:system_ndebug_socket:s0 is not valid (left unmapped).
- [ 6.110636 / 01-04 14:02:57.990] SELinux: Context u:object_r:time_data_file:s0 is not valid (left unmapped).
- [ 6.114017 / 01-04 14:02:57.990] SELinux: Context u:object_r:logger_data_file:s0 is not valid (left unmapped).
- [ 6.116650 / 01-04 14:02:58.000] SELinux: Context u:object_r:lgdrm_data_file:s0 is not valid (left unmapped).
- [ 6.124150 / 01-04 14:02:58.000] SELinux: Context u:object_r:install_data_file:s0 is not valid (left unmapped).
- [ 6.177048 / 01-04 14:02:58.060] [Touch E] [SynaFlashFirmwareWrite 604] blk 2500 / 5824
- [ 6.300476 / 01-04 14:02:58.180] [Touch E] [SynaFlashFirmwareWrite 604] blk 2600 / 5824
- [ 6.426207 / 01-04 14:02:58.310] [Touch E] [SynaFlashFirmwareWrite 604] blk 2700 / 5824
- [ 6.550471 / 01-04 14:02:58.430] [Touch E] [SynaFlashFirmwareWrite 604] blk 2800 / 5824
- [ 6.564001 / 01-04 14:02:58.440] android_usb android0: gadget enable(0)
- [ 6.564015 / 01-04 14:02:58.440] dwc3 f9200000.dwc3: request c212fb00 was not queued to ep0out
- [ 6.564412 / 01-04 14:02:58.440] android_usb android0: gadget enable(0)
- [ 6.564455 / 01-04 14:02:58.440] android_usb android0: request function list: adb
- [ 6.564466 / 01-04 14:02:58.440] func:adb is enabled.
- [ 6.564503 / 01-04 14:02:58.440] android_usb android0: gadget enable(1)
- [ 6.675361 / 01-04 14:02:58.550] [Touch E] [SynaFlashFirmwareWrite 604] blk 2900 / 5824
- [ 6.802281 / 01-04 14:02:58.680] [Touch E] [SynaFlashFirmwareWrite 604] blk 3000 / 5824
- [ 6.928771 / 01-04 14:02:58.810] [Touch E] [SynaFlashFirmwareWrite 604] blk 3100 / 5824
- [ 7.055293 / 01-04 14:02:58.930] [Touch E] [SynaFlashFirmwareWrite 604] blk 3200 / 5824
- [ 7.181474 / 01-04 14:02:59.060] [Touch E] [SynaFlashFirmwareWrite 604] blk 3300 / 5824
- [ 7.307841 / 01-04 14:02:59.190] [Touch E] [SynaFlashFirmwareWrite 604] blk 3400 / 5824
- [ 7.433982 / 01-04 14:02:59.310] [Touch E] [SynaFlashFirmwareWrite 604] blk 3500 / 5824
- [ 7.560219 / 01-04 14:02:59.440] [Touch E] [SynaFlashFirmwareWrite 604] blk 3600 / 5824
- [ 7.668548 / 01-04 14:02:59.550] [Touch E] [SynaFlashFirmwareWrite 604] blk 3700 / 5824
- [ 7.766913 / 01-04 14:02:59.650] [Touch E] [SynaFlashFirmwareWrite 604] blk 3800 / 5824
- [ 7.865776 / 01-04 14:02:59.750] [Touch E] [SynaFlashFirmwareWrite 604] blk 3900 / 5824
- [ 7.964073 / 01-04 14:02:59.840] [Touch E] [SynaFlashFirmwareWrite 604] blk 4000 / 5824
- [ 8.065699 / 01-04 14:02:59.950] [Touch E] [SynaFlashFirmwareWrite 604] blk 4100 / 5824
- [ 8.163903 / 01-04 14:03:00.040] [Touch E] [SynaFlashFirmwareWrite 604] blk 4200 / 5824
- [ 8.266321 / 01-04 14:03:00.150] [Touch E] [SynaFlashFirmwareWrite 604] blk 4300 / 5824
- [ 8.369343 / 01-04 14:03:00.250] [Touch E] [SynaFlashFirmwareWrite 604] blk 4400 / 5824
- [ 8.495207 / 01-04 14:03:00.370] [Touch E] [SynaFlashFirmwareWrite 604] blk 4500 / 5824
- [ 8.621271 / 01-04 14:03:00.500] [Touch E] [SynaFlashFirmwareWrite 604] blk 4600 / 5824
- [ 8.753602 / 01-04 14:03:00.630] [Touch E] [SynaFlashFirmwareWrite 604] blk 4700 / 5824
- [ 8.879651 / 01-04 14:03:00.760] [Touch E] [SynaFlashFirmwareWrite 604] blk 4800 / 5824
- [ 9.005828 / 01-04 14:03:00.889] [Touch E] [SynaFlashFirmwareWrite 604] blk 4900 / 5824
- [ 9.132075 / 01-04 14:03:01.009] [Touch E] [SynaFlashFirmwareWrite 604] blk 5000 / 5824
- [ 9.258019 / 01-04 14:03:01.139] [Touch E] [SynaFlashFirmwareWrite 604] blk 5100 / 5824
- [ 9.388751 / 01-04 14:03:01.269] [Touch E] [SynaFlashFirmwareWrite 604] blk 5200 / 5824
- [ 9.514778 / 11-23 23:18:59.179] [Touch E] [SynaFlashFirmwareWrite 604] blk 5300 / 5824
- [ 9.640648 / 11-23 23:18:59.309] [Touch E] [SynaFlashFirmwareWrite 604] blk 5400 / 5824
- [ 9.767299 / 11-23 23:18:59.439] [Touch E] [SynaFlashFirmwareWrite 604] blk 5500 / 5824
- [ 9.893211 / 11-23 23:18:59.559] [Touch E] [SynaFlashFirmwareWrite 604] blk 5600 / 5824
- [ 10.019497 / 11-23 23:18:59.689] [Touch E] [SynaFlashFirmwareWrite 604] blk 5700 / 5824
- [ 10.065550 / 11-23 23:18:59.739] pet_watchdog
- [ 10.069962 / 11-23 23:18:59.739] [XO_THERM] Result:32 Raw:32392
- [ 10.145708 / 11-23 23:18:59.819] [Touch E] [SynaFlashFirmwareWrite 604] blk 5800 / 5824
- [ 10.174755 / 11-23 23:18:59.839] [Touch E] [SynaFlashFirmwareWrite 608] blk 5824 / 5824
- [ 10.176194 / 11-23 23:18:59.849] [Touch E] [SynaFlashConfigWrite 640] blk 0 / 64
- [ 10.262699 / 11-23 23:18:59.929] [Touch E] [SynaFlashConfigWrite 644] blk 64 / 64
- [ 10.262707 / 11-23 23:18:59.929] [Touch] SynaFinalizeReflash
- [ 10.262712 / 11-23 23:18:59.929] [Touch]
- [ 10.262715 / 11-23 23:18:59.929] Finalizing Reflash...
- [ 10.419117 / 11-23 23:19:00.089] [Touch] power_state[0]
- [ 10.437644 / 11-23 23:19:00.109] [Touch] power_state[1]
- [ 10.505535 / 11-23 23:19:00.179] [Touch] interrupt_state[1]
- [ 10.509812 / 11-23 23:19:00.179] [Touch] common[0P:0x01] finger[0P:0x12] sensor[3P:0x55] analog[1P:0x54] flash[0P:0x34]
- [ 10.510294 / 11-23 23:19:00.179] [Touch] f12_info.ctrl_reg_addr[8]=0x15
- [ 10.510301 / 11-23 23:19:00.179] [Touch] f12_info.ctrl_reg_addr[9]=0x16
- [ 10.510307 / 11-23 23:19:00.179] [Touch] f12_info.ctrl_reg_addr[10]=0x17
- [ 10.510313 / 11-23 23:19:00.179] [Touch] f12_info.ctrl_reg_addr[11]=0x18
- [ 10.510319 / 11-23 23:19:00.179] [Touch] f12_info.ctrl_reg_addr[15]=0x19
- [ 10.510324 / 11-23 23:19:00.179] [Touch] f12_info.ctrl_reg_addr[18]=0x1A
- [ 10.510330 / 11-23 23:19:00.179] [Touch] f12_info.ctrl_reg_addr[20]=0x1B
- [ 10.510336 / 11-23 23:19:00.179] [Touch] f12_info.ctrl_reg_addr[22]=0x1C
- [ 10.510342 / 11-23 23:19:00.179] [Touch] f12_info.ctrl_reg_addr[23]=0x1D
- [ 10.510348 / 11-23 23:19:00.179] [Touch] f12_info.ctrl_reg_addr[24]=0x1E
- [ 10.510353 / 11-23 23:19:00.179] [Touch] f12_info.ctrl_reg_addr[26]=0x1F
- [ 10.510359 / 11-23 23:19:00.179] [Touch] f12_info.ctrl_reg_addr[27]=0x20
- [ 10.510365 / 11-23 23:19:00.179] [Touch] f12_info.ctrl_reg_addr[28]=0x21
- [ 10.510371 / 11-23 23:19:00.179] [Touch] f12_info.data_reg_addr[1]=0x06
- [ 10.510376 / 11-23 23:19:00.179] [Touch] f12_info.data_reg_addr[2]=0x07
- [ 10.510382 / 11-23 23:19:00.179] [Touch] f12_info.data_reg_addr[4]=0x08
- [ 10.510388 / 11-23 23:19:00.179] [Touch] f12_info.data_reg_addr[15]=0x09
- [ 10.511389 / 11-23 23:19:00.179] [Touch] CUSTOMER_FAMILY_REG = 1
- [ 10.511396 / 11-23 23:19:00.179] [Touch] FW_REVISION_REG = 1
- [ 10.511404 / 11-23 23:19:00.179] [Touch] ts->fw_flag = 2
- [ 10.512457 / 11-23 23:19:00.179] [Touch] palm_ctrl_mode:0
- [ 10.512626 / 11-23 23:19:00.179] [Touch] lpwg_update_all : disable, irqctrl=0
- [ 10.512634 / 11-23 23:19:00.179] [Touch] set_doze_param: state:[1], [1] [60]
- [ 10.513050 / 11-23 23:19:00.179] [Touch] sleep_control : curr = [0] next[0]
- [ 10.515432 / 11-23 23:19:00.179] [Touch] report mode: 0
- [ 10.515598 / 11-23 23:19:00.189] [Touch] sleep_control : curr = [0] next[0]
- [ 10.515730 / 11-23 23:19:00.189] [Touch] lpwg_mode[0]
- [ 10.515934 / 11-23 23:19:00.189] [Touch] current_thermal_mode = THERMAL_LOW
- [ 10.515950 / 11-23 23:19:00.189] [Touch] inspection_crack_func
- [ 10.799998 / 11-23 23:19:00.469] [Touch] Tx [28] Rx [16] node_crack_count 0, row_crack_count 0
- [ 10.800030 / 11-23 23:19:00.469] [Touch] check window crack = 0.
- [ 10.800687 / 11-23 23:19:00.469] [Touch] power_state[0]
- [ 10.817619 / 11-23 23:19:00.489] [Touch] power_state[1]
- [ 10.886318 / 11-23 23:19:00.559] [Touch] palm_ctrl_mode:0
- [ 10.886484 / 11-23 23:19:00.559] [Touch] lpwg_update_all : disable, irqctrl=0
- [ 10.886492 / 11-23 23:19:00.559] [Touch] set_doze_param: state:[1], [1] [60]
- [ 10.886907 / 11-23 23:19:00.559] [Touch] sleep_control : curr = [0] next[0]
- [ 10.889297 / 11-23 23:19:00.559] [Touch] report mode: 0
- [ 10.889462 / 11-23 23:19:00.559] [Touch] sleep_control : curr = [0] next[0]
- [ 10.889595 / 11-23 23:19:00.559] [Touch] lpwg_mode[0]
- [ 10.889782 / 11-23 23:19:00.559] [Touch] current_thermal_mode = THERMAL_LOW
- [ 15.017001 / 11-23 23:19:04.689] [Touch] 1 finger pressed : <0> x[ 678] y[ 479] z[ 48]
- [ 15.105333 / 11-23 23:19:04.769] [Touch] touch_release[ ] : <0> x[ 676] y[ 474]
- [ 20.065555 / 11-23 23:19:09.739] pet_watchdog
- [ 20.069973 / 11-23 23:19:09.739] [XO_THERM] Result:33 Raw:32162
- [ 21.045534 / 11-23 23:19:10.719] [Touch] [read_cap_diff_file] queue_delayed_work ->cap_diff success!!
- [ 21.045556 / 11-23 23:19:10.719] [Touch] [read_cap_diff_file] /sns/touch/cap_diff_test.txt file doesn't exist!
- [ 21.689964 / 11-23 23:19:11.359] pm_power_get_event_property_wireless : POWER_SUPPLY_PROP_WIRELESS_ONLINE :0
- [ 21.689974 / 11-23 23:19:11.359] bq24296_monitor_batt_temp: thermal-engine set req.chg_current_ma = 1500, req.chg_current_te = 1500
- [ 21.690445 / 11-23 23:19:11.359] LGE charging scenario : state 0 -> 0(0-1), temp=28, volt=3812, BTM=0, charger=0, cur_set=1500/1500, chg_cur = 507
- [ 21.690454 / 11-23 23:19:11.359] bq24296_monitor_batt_temp: otp_ibat_current=1500
- [ 21.698504 / 11-23 23:19:11.369] bq24296_reginfo: 0x40 0x1D 0x3C 0x30 0xD6 0x8A 0x73 0x4B 0x00 0x00
- [ 23.369842 / 11-23 23:19:13.039] [Touch] 1 finger pressed : <0> x[ 478] y[ 489] z[ 46]
- [ 23.458095 / 11-23 23:19:13.129] [Touch] touch_release[ ] : <0> x[ 474] y[ 492]
- [ 28.873194 / 11-23 23:19:18.539] [Touch] 1 finger pressed : <0> x[ 692] y[ 725] z[ 45]
- [ 28.934881 / 11-23 23:19:18.599] [Touch] touch_release[ ] : <0> x[ 690] y[ 722]
- [ 30.065556 / 11-23 23:19:19.739] pet_watchdog
- [ 30.069959 / 11-23 23:19:19.739] [XO_THERM] Result:33 Raw:32106
- [ 31.849353 / 11-23 23:19:21.519] [Touch] 1 finger pressed : <0> x[ 675] y[1995] z[ 47]
- [ 32.381702 / 11-23 23:19:22.049] [Touch] touch_release[ ] : <0> x[ 684] y[1388]
- [ 32.869632 / 11-23 23:19:22.539] [Touch] 1 finger pressed : <0> x[ 674] y[1919] z[ 47]
- [ 33.401957 / 11-23 23:19:23.069] [Touch] touch_release[ ] : <0> x[ 678] y[1492]
- [ 33.828674 / 11-23 23:19:23.499] [Touch] 1 finger pressed : <0> x[ 543] y[1763] z[ 49]
- [ 33.881492 / 11-23 23:19:23.549] [Touch] touch_release[ ] : <0> x[ 543] y[1763]
- [ 34.760420 / 11-23 23:19:24.429] [Touch] 1 finger pressed : <0> x[ 697] y[ 852] z[ 51]
- [ 34.830988 / 11-23 23:19:24.499] [Touch] touch_release[ ] : <0> x[ 694] y[ 851]
- [ 39.521789 / 11-23 23:19:29.189] [Touch] 1 finger pressed : <0> x[1007] y[1955] z[ 46]
- [ 40.065560 / 11-23 23:19:29.739] pet_watchdog
- [ 40.069974 / 11-23 23:19:29.739] [XO_THERM] Result:33 Raw:32046
- [ 40.187241 / 11-23 23:19:29.859] [Touch] touch_release[ ] : <0> x[1051] y[1526]
- [ 41.188416 / 11-23 23:19:30.859] [Touch] 1 finger pressed : <0> x[ 779] y[1640] z[ 49]
- [ 41.241158 / 11-23 23:19:30.909] [Touch] touch_release[ ] : <0> x[ 779] y[1640]
- [ 42.572289 / 11-23 23:19:32.239] [Touch] 1 finger pressed : <0> x[ 163] y[2225] z[ 47]
- [ 43.592878 / 11-23 23:19:33.259] [Touch] touch_release[ ] : <0> x[1429] y[2303]
- [ 44.405282 / 11-23 23:19:34.069] max17048_interrupt_handler : MAX17048 interupt occured
- [ 44.405872 / 11-23 23:19:34.079] max17048_get_config : config = 0x327e
- [ 44.406393 / 11-23 23:19:34.079] max17048_get_status : status = 0x20ff
- [ 44.407427 / 11-23 23:19:34.079] max17048_work : Raw SOC : 0x83bd / vcell : 0xba2
- [ 44.407434 / 11-23 23:19:34.079] max17048_work : Reported Capacity : 70 / voltage : 3722
- [ 44.407460 / 11-23 23:19:34.079] max17048_clear_interrupt.
- [ 44.413642 / 11-23 23:19:34.079] max17048_set_rcomp_by_temperature : temp = 29, pre_rcomp = 0x32 -> new_rcomp = 0x32
- [ 44.467705 / 11-23 23:19:34.139] mmc0: mmc_start_bkops: raw_bkops_status=0x2, from_exception=1
- [ 44.765787 / 11-23 23:19:34.439] mmc0: mmc_start_bkops: Starting bkops
- [ 45.098848 / 11-23 23:19:34.769] EXT4-fs (mmcblk0p40): mounted filesystem with ordered data mode. Opts:
- [ 47.792074 / 11-23 23:19:37.459] [Touch] 1 finger pressed : <0> x[1120] y[2193] z[ 45]
- [ 47.844847 / 11-23 23:19:37.509] [Touch] touch_release[ ] : <0> x[1120] y[2193]
- [ 47.887801 / 11-23 23:19:37.559] EXT4-fs (mmcblk0p40): mounted filesystem with ordered data mode. Opts:
- [ 47.932367 / 11-23 23:19:37.599] mdss_fb_release_all: try to close unopened fb 2! from recovery
- [ 47.932380 / 11-23 23:19:37.599] mdss_fb_release_all: try to close unopened fb 1! from recovery
- [ 47.932440 / 11-23 23:19:37.599] mdss_fb_release_all: unknown process recovery pid=201 mfd->ref=0
- [ 47.942739 / 11-23 23:19:37.609] mdss_fb_blank_sub: fb0 BLANK +
- [ 47.942748 / 11-23 23:19:37.609] mdss_mdp_overlay_off: fb0 BLANK +
- [ 47.942759 / 11-23 23:19:37.609] mdss_dsi_blank+:
- [ 47.942769 / 11-23 23:19:37.609] mdss_dsi_panel_off+: ctrl=e041c810 ndx=0
- [ 47.942779 / 11-23 23:19:37.609] mdss_dsi_panel_off:-
- [ 47.942787 / 11-23 23:19:37.609] mdss_dsi_blank-:End
- [ 47.942793 / 11-23 23:19:37.609] mdss_dsi_blank+:
- [ 47.942807 / 11-23 23:19:37.609] mdss_dsi_panel_off+: ctrl=e041d010 ndx=1
- [ 48.105388 / 11-23 23:19:37.769] mdss_dsi_panel_off:-
- [ 48.105398 / 11-23 23:19:37.769] mdss_dsi_blank-:End
- [ 48.105407 / 11-23 23:19:37.769] mdss_dsi_off+: ctrl=e041c810 ndx=0
- [ 48.141239 / 11-23 23:19:37.809] mdss_dsi_off-:
- [ 48.141247 / 11-23 23:19:37.809] mdss_dsi_off+: ctrl=e041d010 ndx=1
- [ 48.212295 / 11-23 23:19:37.879] mdss_dsi_off-:
- [ 48.216768 / 11-23 23:19:37.889] mdss_mdp_mixer_free: called with ref_cnt=0
- [ 48.216776 / 11-23 23:19:37.889] mdss_mdp_mixer_free: called with ref_cnt=0
- [ 48.216785 / 11-23 23:19:37.889] mdss_mdp_overlay_off: fb0 BLANK -
- [ 48.216793 / 11-23 23:19:37.889] mdss_fb_blank_sub: fb0 BLANK -
- [ 48.217126 / 11-23 23:19:37.889] uei_irrc_shutdown
- [ 48.217395 / 11-23 23:19:37.889] Restarting system.
- [ 48.217415 / 11-23 23:19:37.889] Going down for restart now
- [ 48.218075 / 11-23 23:19:37.889] Calling SCM to disable SPMI PMIC arbiter
- No errors detected
- UTS_VERSION
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement