Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Oct 23 11:12:58 CEST 2009
- KERNEL supported cpus:
- Intel GenuineIntel
- AMD AuthenticAMD
- NSC Geode by NSC
- Cyrix CyrixInstead
- Centaur CentaurHauls
- Transmeta GenuineTMx86
- Transmeta TransmetaCPU
- UMC UMC UMC UMC
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000003f376000 (usable)
- BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved)
- BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable)
- BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
- BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable)
- BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
- BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable)
- BIOS-e820: 000000003f500000 - 0000000040000000 (reserved)
- BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
- BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
- BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
- DMI 2.4 present.
- last_pfn = 0x3f500 max_arch_pfn = 0x100000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-BFFFF uncachable
- C0000-C7FFF write-protect
- C8000-EFFFF uncachable
- F0000-FFFFF write-protect
- MTRR variable ranges enabled:
- 0 base 0FFFE0000 mask 0FFFE0000 write-protect
- 1 base 0FFFC0000 mask 0FFFE0000 uncachable
- 2 base 000000000 mask 0E0000000 write-back
- 3 base 020000000 mask 0E0000000 write-back
- 4 base 03F800000 mask 0FF800000 uncachable
- 5 base 03F600000 mask 0FFE00000 uncachable
- 6 base 03F500000 mask 0FFF00000 uncachable
- 7 base 000000000 mask 0FFFE0000 uncachable
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
- Scanning 1 areas for low memory corruption
- modified physical RAM map:
- modified: 0000000000000000 - 0000000000002000 (usable)
- modified: 0000000000002000 - 0000000000006000 (reserved)
- modified: 0000000000006000 - 000000000009fc00 (usable)
- modified: 000000000009fc00 - 00000000000a0000 (reserved)
- modified: 00000000000e0000 - 0000000000100000 (reserved)
- modified: 0000000000100000 - 000000003f376000 (usable)
- modified: 000000003f376000 - 000000003f3bf000 (reserved)
- modified: 000000003f3bf000 - 000000003f46d000 (usable)
- modified: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
- modified: 000000003f4bf000 - 000000003f4f0000 (usable)
- modified: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
- modified: 000000003f4ff000 - 000000003f500000 (usable)
- modified: 000000003f500000 - 0000000040000000 (reserved)
- modified: 00000000e0000000 - 00000000f0000000 (reserved)
- modified: 00000000fec00000 - 00000000fec01000 (reserved)
- modified: 00000000fed14000 - 00000000fed1a000 (reserved)
- modified: 00000000fed1c000 - 00000000fed20000 (reserved)
- modified: 00000000fee00000 - 00000000fee01000 (reserved)
- modified: 00000000fff00000 - 0000000100000000 (reserved)
- initial memory mapped : 0 - 01800000
- init_memory_mapping: 0000000000000000-00000000377fe000
- 0000000000 - 0000400000 page 4k
- 0000400000 - 0037400000 page 2M
- 0037400000 - 00377fe000 page 4k
- kernel direct mapping tables up to 377fe000 @ 7000-c000
- RAMDISK: 3f2d5000 - 3f3655d0
- Allocated new RAMDISK: 00008000 - 000985d0
- Move RAMDISK from 000000003f2d5000 - 000000003f3655cf to 00008000 - 000985cf
- ACPI: RSDP 000fe020 00024 (v02 INTEL )
- ACPI: XSDT 3f4fe120 00064 (v01 INTEL Napa 00000001 01000013)
- ACPI: FACP 3f4fc000 000F4 (v04 INTEL Napa 00000001 MSFT 01000013)
- ACPI: DSDT 3f4f2000 05DE6 (v01 INTEL Napa 00000001 MSFT 01000013)
- ACPI: FACS 3f488000 00040
- ACPI: SSDT 3f4fd000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117)
- ACPI: HPET 3f4fb000 00038 (v01 INTEL Napa 00000001 MSFT 01000013)
- ACPI: APIC 3f4fa000 00068 (v02 INTEL Napa 00000001 MSFT 01000013)
- ACPI: MCFG 3f4f9000 0003C (v01 INTEL Napa 00000001 MSFT 01000013)
- ACPI: ASF! 3f4f8000 000A5 (v32 INTEL Napa 00000001 MSFT 01000013)
- ACPI: SLIC 3f4f1000 00180 (v01 INTEL Napa 00000001 MSFT 01000013)
- ACPI: BOOT 3f4f0000 00028 (v01 INTEL Napa 00000001 MSFT 01000013)
- ACPI: Local APIC address 0xfee00000
- 125MB HIGHMEM available.
- 887MB LOWMEM available.
- mapped low ram: 0 - 377fe000
- low ram: 0 - 377fe000
- node 0 low ram: 00000000 - 377fe000
- node 0 bootmap 00100000 - 00106f00
- (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
- #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- #3 [0001000000 - 000156da44] TEXT DATA BSS ==> [0001000000 - 000156da44]
- #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
- #5 [000156e000 - 0001574244] BRK ==> [000156e000 - 0001574244]
- #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
- #7 [0000008000 - 00000985d0] NEW RAMDISK ==> [0000008000 - 00000985d0]
- #8 [0000100000 - 0000107000] BOOTMAP ==> [0000100000 - 0000107000]
- Zone PFN ranges:
- DMA 0x00000000 -> 0x00001000
- Normal 0x00001000 -> 0x000377fe
- HighMem 0x000377fe -> 0x0003f500
- Movable zone start PFN for each node
- early_node_map[6] active PFN ranges
- 0: 0x00000000 -> 0x00000002
- 0: 0x00000006 -> 0x0000009f
- 0: 0x00000100 -> 0x0003f376
- 0: 0x0003f3bf -> 0x0003f46d
- 0: 0x0003f4bf -> 0x0003f4f0
- 0: 0x0003f4ff -> 0x0003f500
- On node 0 totalpages: 259057
- free_area_init_node: node 0, pgdat c141b720, node_mem_map c1575000
- DMA zone: 32 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 3963 pages, LIFO batch:0
- Normal zone: 1744 pages used for memmap
- Normal zone: 221486 pages, LIFO batch:31
- HighMem zone: 251 pages used for memmap
- HighMem zone: 31581 pages, LIFO batch:7
- Using APIC driver default
- ACPI: PM-Timer IO Port: 0x408
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Enabling APIC mode: Flat. Using 1 I/O APICs
- Using ACPI (MADT) for SMP configuration information
- ACPI: HPET id: 0x8086a201 base: 0xfed00000
- SMP: Allowing 2 CPUs, 0 hotplug CPUs
- nr_irqs_gsi: 24
- PM: Registered nosave memory: 0000000000002000 - 0000000000006000
- PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
- NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
- PERCPU: Embedded 14 pages at c1d69000, static data 34332 bytes
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257030
- Kernel command line: root=/dev/sda2
- PID hash table entries: 4096 (order: 12, 16384 bytes)
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Enabling fast FPU save and restore... done.
- Enabling unmasked SIMD FPU exception support... done.
- Initializing CPU#0
- Initializing HighMem for node 0 (000377fe:0003f500)
- Memory: 1020620k/1037312k available (3110k kernel code, 15244k reserved, 1121k data, 416k init, 127328k highmem)
- virtual kernel memory layout:
- fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
- pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- .init : 0xc1422000 - 0xc148a000 ( 416 kB)
- .data : 0xc1309a2d - 0xc1421e68 (1121 kB)
- .text : 0xc1000000 - 0xc1309a2d (3110 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- NR_IRQS:512
- Fast TSC calibration using PIT
- Detected 1595.944 MHz processor.
- Console: colour VGA+ 80x25
- console [tty0] enabled
- hpet clockevent registered
- HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.88 BogoMIPS (lpj=5319813)
- Security Framework initialized
- Mount-cache hash table entries: 512
- CPU: L1 I cache: 32K, L1 D cache: 24K
- CPU: L2 cache: 512K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- mce: CPU supports 5 MCE banks
- CPU0: Thermal monitoring enabled (TM1)
- using mwait in idle threads.
- Performance Counters: Atom events, Intel PMU driver.
- ... version: 3
- ... bit width: 40
- ... generic counters: 2
- ... value mask: 000000ffffffffff
- ... max period: 000000007fffffff
- ... fixed-purpose counters: 3
- ... counter mask: 0000000700000003
- Checking 'hlt' instruction... OK.
- ACPI: Core revision 20090521
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
- Booting processor 1 APIC 0x1 ip 0x6000
- Initializing CPU#1
- Calibrating delay using timer specific routine.. 3193.01 BogoMIPS (lpj=5320018)
- CPU: L1 I cache: 32K, L1 D cache: 24K
- CPU: L2 cache: 512K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- mce: CPU supports 5 MCE banks
- CPU1: Thermal monitoring enabled (TM1)
- x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
- CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
- checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- Brought up 2 CPUs
- Total of 2 processors activated (6386.89 BogoMIPS).
- CPU0 attaching sched-domain:
- domain 0: span 0-1 level SIBLING
- groups: 0 1
- CPU1 attaching sched-domain:
- domain 0: span 0-1 level SIBLING
- groups: 1 0
- Booting paravirtualized kernel on bare hardware
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- PCI: MCFG area at e0000000 reserved in E820
- PCI: Using MMCONFIG for extended config space
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: EC: Look up EC in DSDT
- ACPI: BIOS _OSI(Linux) query ignored
- ACPI: EC: non-query interrupt received, switching to interrupt mode
- ACPI: EC: missing confirmations, switch off interrupt mode.
- ACPI: Interpreter enabled
- ACPI: (supports S0 S3 S4 S5)
- ACPI: Using IOAPIC for interrupt routing
- ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
- ACPI: EC: driver started in poll mode
- ACPI: No dock devices found.
- ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7013cc0), AE_ALREADY_EXISTS
- ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- pci 0000:00:02.0: reg 10 32bit mmio: [0x58480000-0x584fffff]
- pci 0000:00:02.0: reg 14 io port: [0x60c0-0x60c7]
- pci 0000:00:02.0: reg 18 32bit mmio: [0x40000000-0x4fffffff]
- pci 0000:00:02.0: reg 1c 32bit mmio: [0x58500000-0x5853ffff]
- pci 0000:00:02.1: reg 10 32bit mmio: [0x58400000-0x5847ffff]
- pci 0000:00:1b.0: reg 10 64bit mmio: [0x58540000-0x58543fff]
- pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1b.0: PME# disabled
- pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.0: PME# disabled
- pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.1: PME# disabled
- pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.2: PME# disabled
- pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.3: PME# disabled
- pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f]
- pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f]
- pci 0000:00:1d.2: reg 20 io port: [0x6040-0x605f]
- pci 0000:00:1d.3: reg 20 io port: [0x6020-0x603f]
- pci 0000:00:1d.7: reg 10 32bit mmio: [0x58544400-0x585447ff]
- pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- pci 0000:00:1d.7: PME# disabled
- pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
- pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
- pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
- pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
- pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
- pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
- pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
- pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af]
- pci 0000:00:1f.2: PME# supported from D3hot
- pci 0000:00:1f.2: PME# disabled
- pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f]
- pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff]
- pci 0000:00:1c.0: bridge 32bit mmio: [0x57300000-0x583fffff]
- pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
- pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff]
- pci 0000:02:00.0: reg 18 64bit mmio: [0x51010000-0x51010fff]
- pci 0000:02:00.0: reg 20 64bit mmio: [0x51000000-0x5100ffff]
- pci 0000:02:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
- pci 0000:02:00.0: supports D1 D2
- pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:02:00.0: PME# disabled
- pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff]
- pci 0000:00:1c.1: bridge 32bit mmio: [0x56300000-0x572fffff]
- pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x520fffff]
- pci 0000:03:00.0: reg 10 64bit mmio: [0x55200000-0x5520ffff]
- pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
- pci 0000:00:1c.2: bridge 32bit mmio: [0x55200000-0x562fffff]
- pci 0000:00:1c.2: bridge 64bit mmio pref: [0x52100000-0x530fffff]
- pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
- pci 0000:00:1c.3: bridge 32bit mmio: [0x54100000-0x551fffff]
- pci 0000:00:1c.3: bridge 64bit mmio pref: [0x53100000-0x540fffff]
- pci 0000:00:1e.0: transparent bridge
- pci_bus 0000:00: on NUMA node 0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
- ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7013cc0), AE_ALREADY_EXISTS
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
- PCI: Using ACPI for IRQ routing
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- Switched to high resolution mode on CPU 0
- Switched to high resolution mode on CPU 1
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 13 (0x1000-0x1fff), disabling
- pnp: PnP ACPI: found 9 devices
- ACPI: ACPI bus type pnp unregistered
- system 00:01: ioport range 0x200-0x20f has been reserved
- system 00:01: ioport range 0x600-0x60f has been reserved
- system 00:01: ioport range 0x610-0x610 has been reserved
- system 00:01: ioport range 0x800-0x80f has been reserved
- system 00:01: ioport range 0x400-0x47f has been reserved
- system 00:01: ioport range 0x500-0x53f has been reserved
- system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
- system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
- system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
- system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
- system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
- system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
- system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
- pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
- pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
- pci 0000:00:1c.0: IO window: 0x5000-0x5fff
- pci 0000:00:1c.0: MEM window: 0x57300000-0x583fffff
- pci 0000:00:1c.0: PREFETCH window: 0x00000050000000-0x00000050ffffff
- pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
- pci 0000:00:1c.1: IO window: 0x3000-0x4fff
- pci 0000:00:1c.1: MEM window: 0x56300000-0x572fffff
- pci 0000:00:1c.1: PREFETCH window: 0x00000051000000-0x000000520fffff
- pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
- pci 0000:00:1c.2: IO window: 0x2000-0x2fff
- pci 0000:00:1c.2: MEM window: 0x55200000-0x562fffff
- pci 0000:00:1c.2: PREFETCH window: 0x00000052100000-0x000000530fffff
- pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
- pci 0000:00:1c.3: IO window: 0x1000-0x1fff
- pci 0000:00:1c.3: MEM window: 0x54100000-0x551fffff
- pci 0000:00:1c.3: PREFETCH window: 0x00000053100000-0x000000540fffff
- pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
- pci 0000:00:1e.0: IO window: disabled
- pci 0000:00:1e.0: MEM window: disabled
- pci 0000:00:1e.0: PREFETCH window: disabled
- pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:1c.0: setting latency timer to 64
- pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- pci 0000:00:1c.1: setting latency timer to 64
- pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- pci 0000:00:1c.2: setting latency timer to 64
- pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
- pci 0000:00:1c.3: setting latency timer to 64
- pci 0000:00:1e.0: setting latency timer to 64
- pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- pci_bus 0000:01: resource 0 io: [0x5000-0x5fff]
- pci_bus 0000:01: resource 1 mem: [0x57300000-0x583fffff]
- pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff]
- pci_bus 0000:02: resource 0 io: [0x3000-0x4fff]
- pci_bus 0000:02: resource 1 mem: [0x56300000-0x572fffff]
- pci_bus 0000:02: resource 2 pref mem [0x51000000-0x520fffff]
- pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
- pci_bus 0000:03: resource 1 mem: [0x55200000-0x562fffff]
- pci_bus 0000:03: resource 2 pref mem [0x52100000-0x530fffff]
- pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
- pci_bus 0000:04: resource 1 mem: [0x54100000-0x551fffff]
- pci_bus 0000:04: resource 2 pref mem [0x53100000-0x540fffff]
- pci_bus 0000:05: resource 3 io: [0x00-0xffff]
- pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- NET: Registered protocol family 1
- Unpacking initramfs...
- Freeing initrd memory: 577k freed
- Simple Boot Flag value 0x5 read from CMOS RAM was invalid
- Simple Boot Flag at 0x44 set to 0x1
- apm: BIOS not found.
- Scanning for low memory corruption every 60 seconds
- audit: initializing netlink socket (disabled)
- type=2000 audit(1275242413.004:1): initialized
- highmem bounce pool size: 64 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- msgmni has been set to 1746
- alg: No test for stdrng (krng)
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- pci 0000:00:02.0: Boot video device
- pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
- pcieport-driver 0000:00:1c.0: setting latency timer to 64
- pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
- pcieport-driver 0000:00:1c.1: setting latency timer to 64
- pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
- pcieport-driver 0000:00:1c.2: setting latency timer to 64
- pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
- pcieport-driver 0000:00:1c.3: setting latency timer to 64
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- input: Macintosh mouse button emulation as /devices/virtual/input/input0
- PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
- i8042.c: Warning: Keylock active.
- i8042.c: Detected active multiplexing controller, rev 1.1.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX0 port at 0x60,0x64 irq 12
- serio: i8042 AUX1 port at 0x60,0x64 irq 12
- serio: i8042 AUX2 port at 0x60,0x64 irq 12
- serio: i8042 AUX3 port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- cpuidle: using governor ladder
- cpuidle: using governor menu
- TCP cubic registered
- NET: Registered protocol family 17
- Using IPI No-Shortcut mode
- registered taskstats version 1
- Initalizing network drop monitor service
- Freeing unused kernel memory: 416k freed
- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
- SCSI subsystem initialized
- libata version 3.00 loaded.
- pata_acpi 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- pata_acpi 0000:00:1f.2: setting latency timer to 64
- pata_acpi 0000:00:1f.2: PCI INT B disabled
- ata_piix 0000:00:1f.2: version 2.13
- ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
- ata_piix 0000:00:1f.2: setting latency timer to 64
- scsi0 : ata_piix
- scsi1 : ata_piix
- ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
- ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
- ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133
- ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
- ata1.00: configured for UDMA/133
- scsi 0:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
- sd 0:0:0:0: [sda] Attached SCSI disk
- kjournald starting. Commit interval 5 seconds
- EXT3-fs: mounted filesystem with writeback data mode.
- rtc_cmos 00:03: RTC can wake from S4
- rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
- udev: starting version 151
- ACPI: AC Adapter [ACAD] (off-line)
- ACPI: Battery Slot [BAT1] (battery present)
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- ACPI: Power Button [PWRF]
- input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
- ACPI: Power Button [PWRB]
- input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
- ACPI: Lid Switch [LID0]
- input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
- ACPI: Sleep Button [SLPB]
- ACPI: SSDT 3f380c90 00239 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
- ACPI: SSDT 3f37fe10 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
- Marking TSC unstable due to TSC halts in idle
- ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
- processor LNXCPU:00: registered as cooling_device0
- ACPI: Processor [CPU0] (supports 8 throttling states)
- ACPI: SSDT 3f380f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
- ACPI: SSDT 3f37ef10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
- ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
- processor LNXCPU:01: registered as cooling_device1
- ACPI: Processor [CPU1] (supports 8 throttling states)
- input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/input/input6
- ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
- Linux agpgart interface v0.103
- agpgart-intel 0000:00:00.0: Intel 945GME Chipset
- agpgart-intel 0000:00:00.0: detected 7932K stolen memory
- agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
- i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- input: PC Speaker as /devices/platform/pcspkr/input/input7
- Linux video capture interface: v2.00
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- usbcore: registered new interface driver uvcvideo
- USB Video Class driver (v0.1.0)
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- acerhdf: Acer Aspire One Fan driver, v.0.5.13
- acerhdf: Fan control off, to enable do:
- acerhdf: echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
- ACPI: WMI: Mapper loaded
- iTCO_vendor_support: vendor-support=0
- iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
- iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
- iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- HDA Intel 0000:00:1b.0: setting latency timer to 64
- input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
- Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
- input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
- hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x001f000d
- r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- r8169 0000:02:00.0: setting latency timer to 64
- r8169 0000:02:00.0: irq 28 for MSI/MSI-X
- eth0: RTL8102e at 0xf854c000, 00:23:8b:51:2d:63, XID 24a00000 IRQ 28
- cfg80211: Using static regulatory domain info
- cfg80211: Regulatory domain: US
- (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
- (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
- cfg80211: Calling CRDA for country: US
- ath5k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- ath5k 0000:03:00.0: setting latency timer to 64
- ath5k 0000:03:00.0: registered as 'phy0'
- ath: EEPROM regdomain: 0x65
- ath: EEPROM indicates we should expect a direct regpair map
- ath: Country alpha2 being used: 00
- ath: Regpair used: 0x65
- phy0: Selected rate control algorithm 'minstrel'
- Registered led device: ath5k-phy0::rx
- Registered led device: ath5k-phy0::tx
- ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- ehci_hcd 0000:00:1d.7: setting latency timer to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1d.7: debug port 1
- ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58544400
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 8 ports detected
- uhci_hcd: USB Universal Host Controller Interface driver
- uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- uhci_hcd 0000:00:1d.0: setting latency timer to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
- usb usb2: configuration #1 chosen from 1 choice
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- uhci_hcd 0000:00:1d.1: setting latency timer to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
- usb usb3: configuration #1 chosen from 1 choice
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- uhci_hcd 0000:00:1d.2: setting latency timer to 64
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
- usb usb4: configuration #1 chosen from 1 choice
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
- uhci_hcd 0000:00:1d.3: setting latency timer to 64
- uhci_hcd 0000:00:1d.3: UHCI Host Controller
- uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
- usb usb5: configuration #1 chosen from 1 choice
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- st: Version 20081215, fixed bufsize 32768, s/g segs 256
- ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7013cc0), AE_ALREADY_EXISTS
- ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7013cc0), AE_ALREADY_EXISTS
- ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7013cc0), AE_ALREADY_EXISTS
- ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7013cc0), AE_ALREADY_EXISTS
- ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7013cc0), AE_ALREADY_EXISTS
- ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7013cc0), AE_ALREADY_EXISTS
- ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7013cc0), AE_ALREADY_EXISTS
- ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7013cc0), AE_ALREADY_EXISTS
- pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- usb 1-5: new high speed USB device using ehci_hcd and address 2
- EXT3 FS on sda2, internal journal
- usb 1-5: configuration #1 chosen from 1 choice
- uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
- input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input10
- kjournald starting. Commit interval 5 seconds
- EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
- EXT3 FS on sda6, internal journal
- EXT3-fs: mounted filesystem with writeback data mode.
- kjournald starting. Commit interval 5 seconds
- EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
- EXT3 FS on sda7, internal journal
- EXT3-fs: mounted filesystem with writeback data mode.
- kjournald starting. Commit interval 5 seconds
- EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
- EXT3 FS on sda8, internal journal
- EXT3-fs: mounted filesystem with writeback data mode.
- kjournald starting. Commit interval 5 seconds
- EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
- EXT3 FS on sda5, internal journal
- EXT3-fs: mounted filesystem with writeback data mode.
- kjournald starting. Commit interval 5 seconds
- EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
- EXT3 FS on sda9, internal journal
- EXT3-fs: mounted filesystem with writeback data mode.
- Adding 1951856k swap on /dev/sda1. Priority:-1 extents:1 across:1951856k
- Clocksource tsc unstable (delta = -164115977 ns)
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- [drm] Initialized drm 1.1.0 20060810
- pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:02.0: setting latency timer to 64
- mtrr: no more MTRRs available
- [drm] MTRR allocation failed. Graphics performance may suffer.
- [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- usb 1-2: new high speed USB device using ehci_hcd and address 3
- usb 1-2: configuration #1 chosen from 1 choice
- usb 1-2: USB disconnect, address 3
- ADDRCONF(NETDEV_UP): wlan0: link is not ready
- wlan0: authenticate with AP 00:1c:df:51:e1:c0
- wlan0: authenticated
- wlan0: associate with AP 00:1c:df:51:e1:c0
- wlan0: RX AssocResp from 00:1c:df:51:e1:c0 (capab=0x1 status=0 aid=4)
- wlan0: associated
- ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- wlan0: no IPv6 routers present
- usb 1-2: new high speed USB device using ehci_hcd and address 4
- usb 1-2: configuration #1 chosen from 1 choice
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement