Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-29-generic] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Device Model: TOSHIBA MK3256GSY
- Serial Number: 6016F53LS
- LU WWN Device Id: 5 000039 296a001ce
- Firmware Version: LH013C
- User Capacity: 320,072,933,376 bytes [320 GB]
- Sector Size: 512 bytes logical/physical
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: 8
- ATA Standard is: Exact ATA specification draft version not indicated
- Local Time is: Fri Sep 7 10:38:30 2012 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- See vendor-specific Attribute list for marginal Attributes.
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 120) seconds.
- Offline data collection
- capabilities: (0x51) SMART execute Offline immediate.
- No Auto Offline data collection support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 79) minutes.
- SCT capabilities: (0x0033) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 100 100 050 Pre-fail Always - 0
- 2 Throughput_Performance 0x0007 100 100 050 Pre-fail Always - 0
- 3 Spin_Up_Time 0x0003 100 100 002 Pre-fail Always - 2130
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 1761
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 5
- 7 Seek_Error_Rate 0x000f 100 100 050 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
- 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 3504
- 10 Spin_Retry_Count 0x0013 135 100 030 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1735
- 183 Runtime_Bad_Block 0x0022 100 100 001 Old_age Always - 4
- 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
- 185 Unknown_Attribute 0x0032 100 100 001 Old_age Always - 65535
- 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 3595
- 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
- 189 High_Fly_Writes 0x003a 100 100 001 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 066 038 045 Old_age Always In_the_past 34 (Min/Max 21/34)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 151
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 9240717
- 193 Load_Cycle_Count 0x0032 089 089 000 Old_age Always - 117039
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 5
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 2
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 36
- SMART Error Log Version: 1
- ATA Error Count: 9804 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 9804 occurred at disk power-on lifetime: 3504 hours (146 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 12 84 61 7f e0 Error: ICRC, ABRT 18 sectors at LBA = 0x007f6184 = 8348036
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 40 16 80 61 7f e0 00 00:00:06.617 READ DMA EXT
- 25 40 04 bc 82 fe e0 00 00:00:06.617 READ DMA EXT
- 25 40 3c 80 82 fe e0 00 00:00:06.610 READ DMA EXT
- 25 40 33 8d 82 fd e0 00 00:00:06.609 READ DMA EXT
- 25 40 0d 80 82 fd e0 00 00:00:06.598 READ DMA EXT
- Error 9803 occurred at disk power-on lifetime: 3504 hours (146 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 4a 8a 81 e6 40 Error: UNC at LBA = 0x00e6818a = 15106442
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 20 68 20 ff 5f 40 00 00:21:48.028 READ FPDMA QUEUED
- 60 20 60 e0 45 03 40 00 00:21:48.028 READ FPDMA QUEUED
- 61 08 40 b0 90 00 40 00 00:21:48.028 WRITE FPDMA QUEUED
- 61 10 60 68 fe 5f 40 00 00:21:48.028 WRITE FPDMA QUEUED
- 61 08 40 80 99 01 40 00 00:21:48.028 WRITE FPDMA QUEUED
- Error 9802 occurred at disk power-on lifetime: 3504 hours (146 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 92 8a 81 e6 40 Error: WP at LBA = 0x00e6818a = 15106442
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 08 38 b0 1b 00 40 00 00:21:44.603 WRITE FPDMA QUEUED
- 61 08 38 e0 24 00 40 00 00:21:44.603 WRITE FPDMA QUEUED
- 61 08 28 30 d2 61 40 00 00:21:44.603 WRITE FPDMA QUEUED
- 61 08 28 b0 f0 5b 40 00 00:21:44.602 WRITE FPDMA QUEUED
- 60 20 20 c0 fd 5f 40 00 00:21:44.602 READ FPDMA QUEUED
- Error 9801 occurred at disk power-on lifetime: 3504 hours (146 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 22 8a 81 e6 40 Error: WP at LBA = 0x00e6818a = 15106442
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 08 48 b0 1b 00 40 00 00:21:41.300 WRITE FPDMA QUEUED
- 61 08 40 e0 24 00 40 00 00:21:41.299 WRITE FPDMA QUEUED
- 61 08 38 30 d2 61 40 00 00:21:41.299 WRITE FPDMA QUEUED
- 61 08 30 b8 f0 5b 40 00 00:21:41.298 WRITE FPDMA QUEUED
- 61 20 28 10 e9 5c 40 00 00:21:41.298 WRITE FPDMA QUEUED
- Error 9800 occurred at disk power-on lifetime: 3504 hours (146 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 7a 8a 81 e6 40 Error: WP at LBA = 0x00e6818a = 15106442
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 10 58 a8 b1 0e 40 00 00:21:37.977 WRITE FPDMA QUEUED
- 61 08 50 48 73 3f 40 00 00:21:37.977 WRITE FPDMA QUEUED
- 61 20 40 78 fb 5f 40 00 00:21:37.977 WRITE FPDMA QUEUED
- 61 08 48 78 b1 0e 40 00 00:21:37.977 WRITE FPDMA QUEUED
- 61 0c 40 88 72 41 40 00 00:21:37.976 WRITE FPDMA QUEUED
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement