Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1992-2014 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 11.0-CURRENT #1 r268571: Sun Jul 13 10:19:28 CEST 2014
- charly@box.underbuild.com:/usr/obj/usr/src/sys/PROD i386
- FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
- VT: running with driver "vga".
- CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2394.05-MHz 686-class CPU)
- Origin="GenuineIntel" Id=0xf27 Family=0xf Model=0x2 Stepping=7
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x4400<CNXT-ID,xTPR>
- real memory = 2147483648 (2048 MB)
- avail memory = 2081239040 (1984 MB)
- Cuse4BSD v0.1.33 @ /dev/cuse
- kbd1 at kbdmux0
- random: <Software, Yarrow> initialized
- acpi0: <ASUS P4S533-X> on motherboard
- acpi0: Power Button (fixed)
- acpi0: reservation of 0, a0000 (3) failed
- acpi0: reservation of 100000, 7ff00000 (3) failed
- cpu0: <ACPI CPU> on acpi0
- attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
- Event timer "RTC" frequency 32768 Hz quality 0
- Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
- acpi_button0: <Power Button> on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- agp0: <SiS 645DX host to AGP bridge> on hostb0
- pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- vgapci0: <VGA-compatible display> port 0xd800-0xd8ff mem 0xe0000000-0xefffffff,0xd7800000-0xd780ffff irq 11 at device 0.0 on pci1
- vgapci0: Boot video device
- isab0: <PCI-ISA bridge> at device 2.0 on pci0
- isa0: <ISA bus> on isab0
- atapci0: <SiS 962 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xa400-0xa40f irq 11 at device 2.5 on pci0
- ata0: <ATA channel> at channel 0 on atapci0
- ata1: <ATA channel> at channel 1 on atapci0
- pcm0: <SiS 7012> port 0x9400-0x94ff,0x9000-0x907f at device 2.7 on pci0
- pcm0: <Analog Devices AD1980 AC97 Codec>
- ohci0: <SiS 5571 USB controller> mem 0xd7000000-0xd7000fff irq 9 at device 3.0 on pci0
- usbus0 on ohci0
- ohci1: <SiS 5571 USB controller> mem 0xd6800000-0xd6800fff irq 9 at device 3.1 on pci0
- usbus1 on ohci1
- ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd6000000-0xd6000fff at device 3.3 on pci0
- usbus2: EHCI version 1.0
- usbus2 on ehci0
- sis0: <SiS 900 10/100BaseTX> port 0x8800-0x88ff mem 0xd5800000-0xd5800fff at device 4.0 on pci0
- miibus0: <MII bus> on sis0
- rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
- rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
- sis0: Ethernet address: 00:0c:6e:25:e3:e9
- fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
- fd0: <1440-KB 3.5" drive> on fdc0 drive 0
- ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
- ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
- ppc0: FIFO with 16/16/16 bytes threshold
- ppbus0: <Parallel port bus> on ppc0
- lpt0: <Printer> on ppbus0
- lpt0: Interrupt-driven port
- ppi0: <Parallel I/O> on ppbus0
- uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
- pmtimer0 on isa0
- orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0
- atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- fuse-freebsd: version 0.4.4, FUSE ABI 7.8
- Timecounters tick every 1.000 msec
- random: unblocking device.
- usbus0: 12Mbps Full Speed USB v1.0
- usbus1: 12Mbps Full Speed USB v1.0
- ugen0.1: <SiS> at usbus0
- uhub0: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
- ugen1.1: <SiS> at usbus1
- uhub1: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
- usbus2: 480Mbps High Speed USB v2.0
- ugen2.1: <SiS> at usbus2
- uhub2: <SiS EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
- uhub0: 3 ports with 3 removable, self powered
- uhub1: 3 ports with 3 removable, self powered
- ada0 at ata0 bus 0 scbus0 target 0 lun 0
- ada0: <ST380011A 3.04> ATA-6 device
- ada0: Serial Number 3JV0Q594
- ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
- ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
- ada0: Previously was known as ad0
- ada1 at ata0 bus 0 scbus0 target 1 lun 0
- ada1: <ST3200826A 3.06> ATA-7 device
- ada1: Serial Number 5ND2TXC4
- ada1: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
- ada1: 190782MB (390721968 512 byte sectors: 16H 63S/T 16383C)
- ada1: Previously was known as ad1
- cd0 at ata1 bus 0 scbus1 target 0 lun 0
- cd0: <HL-DT-ST DVDRAM GSA-4120B A102> Removable CD-ROM SCSI-0 device
- cd0: Serial Number K3746FE4751
- cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
- cd0: Attempt to query device size failed: NOT READY, Medium not present
- cd1 at ata1 bus 0 scbus1 target 1 lun 0
- cd1: <HL-DT-ST DVD-ROM GDR8161B 0100> Removable CD-ROM SCSI-0 device
- cd1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
- cd1: Attempt to query device size failed: NOT READY, Medium not present
- Timecounter "TSC-low" frequency 1197026690 Hz quality 800
- Root mount waiting for: usbus2
- Root mount waiting for: usbus2
- uhub2: 6 ports with 6 removable, self powered
- Root mount waiting for: usbus2
- ugen0.2: <Microsoft> at usbus0
- ukbd0: <Microsoft Microsoft 2.4GHz Transceiver v8.0, class 0/0, rev 2.00/6.56, addr 2> on usbus0
- kbd2 at ukbd0
- ugen2.2: <vendor 0x046d> at usbus2
- Root mount waiting for: usbus2
- Root mount waiting for: usbus2
- ugen0.3: <Sennheiser Communications> at usbus0
- ugen2.3: <Ralink> at usbus2
- Trying to mount root from ufs:/dev/ada0p2 [rw]...
- Setting hostuuid: be385b54-00b4-11e4-b6f8-000c6e25e3e9.
- Setting hostid: 0x83eeaf59.
- Entropy harvesting: interrupts ethernet point_to_point swi.
- Starting file system checks:
- /dev/ada0p2: FILE SYSTEM CLEAN; SKIPPING CHECKS
- /dev/ada0p2: clean, 14132621 free (47581 frags, 1760630 blocks, 0.3% fragmentation)
- Mounting local file systems:.
- Writing entropy file:.
- Setting hostname: box.underbuild.com.
- Starting Network: lo0 sis0.
- lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
- options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
- inet6 ::1 prefixlen 128
- inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
- inet 127.0.0.1 netmask 0xff000000
- nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
- sis0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
- options=82008<VLAN_MTU,WOL_MAGIC,LINKSTATE>
- ether 00:0c:6e:25:e3:e9
- nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
- media: Ethernet autoselect (none)
- status: no carrier
- Starting devd.
- Starting Network: sis0.
- sis0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
- options=82008<VLAN_MTU,WOL_MAGIC,LINKSTATE>
- ether 00:0c:6e:25:e3:e9
- nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
- media: Ethernet autoselect (none)
- status: no carrier
- Additional inet routing options: gateway=YES.
- Additional inet6 routing options: gateway=YES.
- Starting webcamd.
- Attached to ugen0.2[0]
- Starting webcamd.
- Attached to ugen0.2[1]
- Starting webcamd.
- Attached to ugen0.2[2]
- Configuring keyboard: keymap.
- ums0: <Microsoft Microsoft 2.4GHz Transceiver v8.0, class 0/0, rev 2.00/6.56, addr 2> on usbus0
- ums0: 5 buttons and [XYZT] coordinates ID=26
- ums0: 0 buttons and [T] coordinates ID=0
- uhid0: <Microsoft Microsoft 2.4GHz Transceiver v8.0, class 0/0, rev 2.00/6.56, addr 2> on usbus0
- uhid1: <Sennheiser Communications Sennheiser USB headset, class 0/0, rev 1.10/1.00, addr 3> on usbus0
- Starting webcamd.
- Attached to ugen2.2[0]
- Starting webcamd.
- Webcamd is already running for ugen2.2.0
- /usr/local/etc/rc.d/webcamd: WARNING: failed to start webcamd
- uaudio0: <Sennheiser Communications Sennheiser USB headset, class 0/0, rev 1.10/1.00, addr 3> on usbus0
- uaudio1: <vendor 0x046d product 0x0805, class 239/2, rev 2.00/0.09, addr 2> on usbus2
- uaudio1: No playback.
- uaudio1: Record: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
- uaudio1: Record: 32000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
- uaudio1: Record: 24000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
- uaudio1: Record: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
- uaudio1: No MIDI sequencer.
- pcm1: <USB audio> on uaudio1
- uaudio1: No HID volume keys found.
- uaudio0: Play: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
- uaudio0: Play: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
- uaudio0: Record: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
- uaudio0: Record: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
- uaudio0: No MIDI sequencer.
- pcm2: <USB audio> on uaudio0
- uaudio0: HID volume keys found.
- Starting webcamd.
- Attached to ugen0.3[3]
- Starting webcamd.
- Attached to ugen2.3[0]
- run0: <Ralink 11n Adapter, class 0/0, rev 2.00/1.01, addr 3> on usbus2
- run0: MAC/BBP RT3071 (rev 0x0211), RF RT3022 (MIMO 2T2R), address 1c:af:f7:68:44:9d
- Starting ums0 moused.
- wlan0: Ethernet address: 1c:af:f7:68:44:9d
- run0: firmware RT3071 ver. 0.33 loaded
- Starting wpa_supplicant.
- Starting Network: run0.
- run0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
- ether 1c:af:f7:68:44:9d
- nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
- media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
- status: associated
- run0: firmware RT3071 ver. 0.33 loaded
- Additional inet routing options: gateway=YES.
- Additional inet6 routing options: gateway=YES.
- Starting pflogd:
- Starting pflog.
- Enabling pfJul 21 23:17:09 pflogd[631]: [priv]: msg PRIV_OPEN_LOG received
- No ALTQ support in kernel
- ALTQ related functions disabled
- No ALTQ support in kernel
- ALTQ related functions disabled
- .
- Additional inet routing options: gateway=YES.
- add net fe80::: gateway ::1
- add net ff02::: gateway ::1
- add net ::ffff:0.0.0.0: gateway ::1
- add net ::0.0.0.0: gateway ::1
- add net default: gateway 2001:05c0:1400:000b::1
- Additional inet6 routing options: gateway=YES.
- ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/darktable /usr/local/lib/event2 /usr/local/lib/gcc47 /usr/local/lib/libxul /usr/local/lib/nss /usr/local/lib/pth /usr/local/llvm33/lib
- a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
- Waiting 30s for the default route interface: .........(wlan0)
- Creating and/or trimming log files.
- Starting syslogd.
- Additional ABI support: linux.
- Starting casperd.
- Clearing /tmp (X related).
- Updating motd:.
- Mounting late file systems:.
- Starting smartd.
- Starting dbus.
- Starting hald.
- Starting gogoc.
- gogoCLIENT v1.2-RELEASE build Jul 21 2014-22:21:20
- Built on ///FreeBSD box.underbuild.com 11.0-CURRENT FreeBSD 11.0-CURRENT #1 r268571: Sun Jul 13 10:19:28 CEST 2014 charly@box.underbuild.com:/usr/obj/usr/src/sys/PROD i386///
- tun0: link state changed to UP
- Starting cupsd.
- Starting avahi-daemon.
- Starting avahi-dnsconfd.
- Configuring syscons: keymap blanktime.
- Performing sanity check on sshd configuration.
- Starting sshd.
- Starting sendmail_submit.
- Starting sendmail_msp_queue.
- Starting cron.
- Mon Jul 21 23:17:33 CEST 2014
- info: [drm] Initialized drm 1.1.0 20060810
- drmn0: <ATI Radeon HD 3450> on vgapci0
- info: [drm] AGP at 0xd8000000 64MB
- info: [drm] RADEON_IS_AGP
- info: [drm] initializing kernel modesetting (RV620 0x1002:0x95C6 0x1787:0x0028).
- info: [drm] register mmio base: 0xD7800000
- info: [drm] register mmio size: 65536
- info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
- info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:1:0:0, vendor=1002, device=95c6
- info: [drm] radeon_atrm_get_bios: Get ACPI device handle
- info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
- info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
- info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
- info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
- info: [drm] igp_read_bios_from_vram: VRAM base address: 0xe0000000
- info: [drm] igp_read_bios_from_vram: Map address: 0xf0caa000 (262144 bytes)
- info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x0000
- info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
- info: [drm] radeon_read_bios: Map address: 0xc00c0000 (131072 bytes)
- info: [drm] ATOM BIOS: RV620LE
- drmn0: info: GTT: 64M 0xD8000000 - 0xDBFFFFFF
- drmn0: info: VRAM: 512M 0xB8000000 - 0xD7FFFFFF (512M used)
- info: [drm] Detected VRAM RAM=512M, BAR=256M
- info: [drm] RAM width 64bits DDR
- [TTM] Zone kernel: Available graphics memory: 1036008 kiB
- [TTM] Initializing pool allocator
- info: [drm] radeon: 512M of VRAM memory ready
- info: [drm] radeon: 64M of GTT memory ready.
- info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- info: [drm] Driver supports precise vblank timestamp query.
- info: [drm] radeon: irq initialized.
- info: [drm] GART: num cpu pages 16384, num gpu pages 16384
- info: [drm] Loading RV620 Microcode
- error: [drm:pid1351:radeon_gart_bind] *ERROR* trying to bind memory to uninitialized GART !
- error: [drm:pid1351:radeon_ttm_backend_bind] *ERROR* failed to bind 1 pages at 0x00000000
- drmn0: warning: (-22) create WB bo failed
- drmn0: error: disabling GPU acceleration
- drmn0: warning: 0xc7d3a000 unpin not necessary
- drmn0: warning: 0xc7d3a000 unpin not necessary
- drmn0: info: GPU softreset: 0x00000003
- drmn0: info: R_008010_GRBM_STATUS = 0xA0003030
- drmn0: info: R_008014_GRBM_STATUS2 = 0x00000003
- drmn0: info: R_000E50_SRBM_STATUS = 0x200080C0
- drmn0: info: R_008674_CP_STALLED_STAT1 = 0x00000000
- drmn0: info: R_008678_CP_STALLED_STAT2 = 0x00000000
- drmn0: info: R_00867C_CP_BUSY_STAT = 0x00000000
- drmn0: info: R_008680_CP_STAT = 0x80100000
- drmn0: info: R_008020_GRBM_SOFT_RESET=0x00007FEE
- drmn0: info: R_008020_GRBM_SOFT_RESET=0x00000001
- drmn0: info: R_008010_GRBM_STATUS = 0xA0003030
- drmn0: info: R_008014_GRBM_STATUS2 = 0x00000003
- drmn0: info: R_000E50_SRBM_STATUS = 0x200080C0
- drmn0: info: R_008674_CP_STALLED_STAT1 = 0x00000000
- drmn0: info: R_008678_CP_STALLED_STAT2 = 0x00000000
- drmn0: info: R_00867C_CP_BUSY_STAT = 0x00000000
- drmn0: info: R_008680_CP_STAT = 0x80100000
- [TTM] Finalizing pool allocator
- [TTM] Zone kernel: Used memory at exit: 0 kiB
- info: [drm] radeon: ttm finalized
- info: [drm] Forcing AGP to PCIE mode
- info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
- info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:1:0:0, vendor=1002, device=95c6
- info: [drm] radeon_atrm_get_bios: Get ACPI device handle
- info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
- info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
- info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
- info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
- info: [drm] igp_read_bios_from_vram: VRAM base address: 0xe0000000
- info: [drm] igp_read_bios_from_vram: Map address: 0xf0cad000 (262144 bytes)
- info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x0000
- info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
- info: [drm] radeon_read_bios: Map address: 0xc00c0000 (131072 bytes)
- info: [drm] ATOM BIOS: RV620LE
- drmn0: info: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
- drmn0: info: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
- info: [drm] Detected VRAM RAM=512M, BAR=256M
- info: [drm] RAM width 64bits DDR
- [TTM] Zone kernel: Available graphics memory: 1036008 kiB
- [TTM] Initializing pool allocator
- info: [drm] radeon: 512M of VRAM memory ready
- info: [drm] radeon: 512M of GTT memory ready.
- info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- info: [drm] Driver supports precise vblank timestamp query.
- info: [drm] radeon: irq initialized.
- info: [drm] GART: num cpu pages 131072, num gpu pages 131072
- info: [drm] Loading RV620 Microcode
- info: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
- drmn0: info: WB enabled
- drmn0: info: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x0xed263c00
- drmn0: info: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x0xed263c0c
- info: [drm] ring test on 0 succeeded in 1 usecs
- info: [drm] ring test on 3 succeeded in 1 usecs
- info: [drm] radeon_device_init: Taking over the fictitious range 0xe0000000-0xf0000000
- iicbus0: <Philips I2C bus> on iicbb0 addr 0xee
- iic0: <I2C generic I/O> on iicbus0
- iicbus1: <Philips I2C bus> on iicbb1 addr 0xc7
- iic1: <I2C generic I/O> on iicbus1
- iicbus2: <Philips I2C bus> on iicbb2 addr 0xc7
- iic2: <I2C generic I/O> on iicbus2
- iicbus3: <Philips I2C bus> on iicbb3 addr 0xc7
- iic3: <I2C generic I/O> on iicbus3
- iicbus4: <Philips I2C bus> on iicbb4 addr 0xc7
- iic4: <I2C generic I/O> on iicbus4
- info: [drm] Radeon Display Connectors
- info: [drm] Connector 0:
- info: [drm] DIN-1
- info: [drm] Encoders:
- info: [drm] TV1: INTERNAL_KLDSCP_DAC2
- info: [drm] Connector 1:
- info: [drm] DVI-I-1
- info: [drm] HPD2
- info: [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
- info: [drm] Encoders:
- info: [drm] CRT2: INTERNAL_KLDSCP_DAC2
- info: [drm] DFP1: INTERNAL_UNIPHY
- info: [drm] Connector 2:
- info: [drm] DVI-I-2
- info: [drm] HPD1
- info: [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
- info: [drm] Encoders:
- info: [drm] CRT1: INTERNAL_KLDSCP_DAC1
- info: [drm] DFP2: INTERNAL_KLDSCP_LVTMA
- info: [drm] Internal thermal controller without fan control
- info: [drm] radeon: power management initialized
- info: [drm] fb mappable at 0xE0142000
- info: [drm] vram apper at 0xE0000000
- info: [drm] size 7299072
- info: [drm] fb depth is 24
- info: [drm] pitch is 6912
- fbd0 on drmn0
- VT: Replacing driver "vga" with new "fb".
- info: [drm] Initialized radeon 2.29.0 20080528
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement