Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- rmorris@yocto-buildtools:~/poky/build$ runqemu qemuzynq serial
- Continuing with the following parameters:
- KERNEL: [/home/rmorris/poky/build/tmp/deploy/images/qemuzynq/uImage]
- ROOTFS: [/home/rmorris/poky/build/tmp/deploy/images/qemuzynq/core-image-minimal-qemuzynq-20150108021927.rootfs.cpio]
- FSTYPE: [cpio]
- Setting up tap interface under sudo
- Acquiring lockfile for tap0...
- Interrupt character is '^]'
- Running qemu-system-arm...
- /home/rmorris/poky/build/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-arm -kernel /home/rmorris/poky/build/tmp/deploy/images/qemuzynq/uImage -M xilinx-zynq-a9 -serial null -serial mon:stdio -dtb /home/rmorris/poky/build/tmp/deploy/images/qemuzynq/uImage-qemuzynq.dtb -initrd /home/rmorris/poky/build/tmp/deploy/images/qemuzynq/core-image-minimal-qemuzynq-20150108021927.rootfs.cpio -no-reboot -serial stdio -m 1024 --append "earlyprintk root=/dev/ram rw console=ttyPS0"
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 3.14.2-xilinx (rmorris@yocto-buildtools) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Wed Jan 7 21:53:33 EST 2015
- [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: xilinx-zynq-a9
- [ 0.000000] Memory policy: Data cache writeback
- [ 0.000000] CPU: All CPU(s) started in SVC mode.
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @eefde000 s9024 r8192 d15552 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624
- [ 0.000000] Kernel command line: earlyprintk root=/dev/ram rw console=ttyPS0
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 1028356K/1048576K available (4390K kernel code, 237K rwdata, 1424K rodata, 196K init, 193K bss, 20220K reserved, 270336K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc05b5d20 (5816 kB)
- [ 0.000000] .init : 0xc05b6000 - 0xc05e7340 ( 197 kB)
- [ 0.000000] .data : 0xc05e8000 - 0xc0623680 ( 238 kB)
- [ 0.000000] .bss : 0xc062368c - 0xc0653d60 ( 194 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] GIC CPU mask not found - kernel will fail to boot.
- [ 0.000000] GIC CPU mask not found - kernel will fail to boot.
- [ 0.000000] ps7-slcr mapped to f0002000
- [ 0.000000] zynq_clock_init: clkc starts at f0002100
- [ 0.000000] Zynq clock init
- [ 0.000149] sched_clock: 64 bits at 108MHz, resolution 9ns, wraps every 2537334505472ns
- [ 0.002039] ps7-ttc #0 at f0004000, irq=43
- [ 0.004719] Console: colour dummy device 80x30
- [ 0.005115] Calibrating delay loop... 806.91 BogoMIPS (lpj=4034560)
- [ 0.162746] pid_max: default: 32768 minimum: 301
- [ 0.163525] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.163558] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.172517] CPU: Testing write buffer coherency: ok
- [ 0.177699] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.177889] Setting up static identity map for 0x42c448 - 0x42c4a0
- [ 0.178299] L2x0 series cache controller enabled
- [ 0.178330] l2x0: 8 ways, CACHE_ID 0x00000000, AUX_CTRL 0x00000000, Cache size: 512 kB
- [ 0.232228] CPU1: failed to boot: -38
- [ 0.232872] Brought up 1 CPUs
- [ 0.232901] SMP: Total of 1 processors activated.
- [ 0.232977] CPU: All CPU(s) started in SVC mode.
- [ 0.237971] devtmpfs: initialized
- [ 0.245329] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 0
- [ 0.269871] regulator-dummy: no parameters
- [ 0.272977] NET: Registered protocol family 16
- [ 0.275313] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.280529] cpuidle: using governor ladder
- [ 0.280612] cpuidle: using governor menu
- [ 0.289839] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
- [ 0.305243] hw-breakpoint: debug architecture 0x0 unsupported.
- [ 0.306033] zynq-ocm f800c000.ps7-ocmc: can't request region for resource [mem 0x00000008-0x0003ffff]
- [ 0.306430] zynq-ocm: probe of f800c000.ps7-ocmc failed with error -16
- [ 0.347781] bio: create slab <bio-0> at 0
- [ 0.350128] VCCPINT: 1000 mV
- [ 0.353486] vgaarb: loaded
- [ 0.355523] SCSI subsystem initialized
- [ 0.357739] usbcore: registered new interface driver usbfs
- [ 0.358179] usbcore: registered new interface driver hub
- [ 0.358742] usbcore: registered new device driver usb
- [ 0.360564] EDAC MC: Ver: 3.0.0
- [ 0.368790] Switched to clocksource arm_global_timer
- [ 0.415489] NET: Registered protocol family 2
- [ 0.420154] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.420399] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.420614] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.420908] TCP: reno registered
- [ 0.420991] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.421085] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.422178] NET: Registered protocol family 1
- [ 0.423819] RPC: Registered named UNIX socket transport module.
- [ 0.423855] RPC: Registered udp transport module.
- [ 0.423875] RPC: Registered tcp transport module.
- [ 0.423891] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.426737] Trying to unpack rootfs image as initramfs...
- [ 0.582803] Freeing initrd memory: 4564K (c8000000 - c8475000)
- [ 0.583418] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 1 counters available
- [ 0.587923] futex hash table entries: 512 (order: 3, 32768 bytes)
- [ 0.588266] audit: initializing netlink subsys (disabled)
- [ 0.589303] audit: type=2000 audit(0.569:1): initialized
- [ 0.592389] bounce pool size: 64 pages
- [ 0.595367] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 0.596138] msgmni has been set to 1489
- [ 0.657039] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.657131] io scheduler noop registered
- [ 0.657168] io scheduler deadline registered
- [ 0.657305] io scheduler cfq registered (default)
- [ 0.663945] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-267056
- [ 0.663986] dma-pl330 f8003000.ps7-dma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
- [ 0.666565] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 0.672209] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 859788) is a xuartps
- [ 0.698084] console [ttyPS0] enabled
- [ 0.700813] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f00a6000
- [ 0.709883] brd: module loaded
- [ 0.721080] loop: module loaded
- [ 0.830725] m25p80 spi32764.0: SPI transfer timed out
- [ 0.831171] m25p80: probe of spi32764.0 failed with error -110
- [ 0.837171] CAN device driver interface
- [ 0.841679] libphy: MACB_mii_bus: probed
- [ 0.841922] mdio_bus e000b000.ps7-eth: /amba@0/ps7-ethernet@e000b000/mdio has invalid PHY address
- [ 0.842352] mdio_bus e000b000.ps7-eth: scan phy mdio at address 0
- [ 0.851162] mdio_bus e000b000.ps7-eth: scan phy mdio at address 1
- [ 0.851508] mdio_bus e000b000.ps7-eth: scan phy mdio at address 2
- [ 0.851771] mdio_bus e000b000.ps7-eth: scan phy mdio at address 3
- [ 0.852033] mdio_bus e000b000.ps7-eth: scan phy mdio at address 4
- [ 0.852294] mdio_bus e000b000.ps7-eth: scan phy mdio at address 5
- [ 0.852843] mdio_bus e000b000.ps7-eth: scan phy mdio at address 6
- [ 0.853115] mdio_bus e000b000.ps7-eth: scan phy mdio at address 7
- [ 0.853405] mdio_bus e000b000.ps7-eth: scan phy mdio at address 8
- [ 0.853674] mdio_bus e000b000.ps7-eth: scan phy mdio at address 9
- [ 0.853990] mdio_bus e000b000.ps7-eth: scan phy mdio at address 10
- [ 0.854365] mdio_bus e000b000.ps7-eth: scan phy mdio at address 11
- [ 0.854644] mdio_bus e000b000.ps7-eth: scan phy mdio at address 12
- [ 0.854891] mdio_bus e000b000.ps7-eth: scan phy mdio at address 13
- [ 0.855171] mdio_bus e000b000.ps7-eth: scan phy mdio at address 14
- [ 0.855426] mdio_bus e000b000.ps7-eth: scan phy mdio at address 15
- [ 0.855677] mdio_bus e000b000.ps7-eth: scan phy mdio at address 16
- [ 0.855928] mdio_bus e000b000.ps7-eth: scan phy mdio at address 17
- [ 0.856203] mdio_bus e000b000.ps7-eth: scan phy mdio at address 18
- [ 0.856450] mdio_bus e000b000.ps7-eth: scan phy mdio at address 19
- [ 0.856697] mdio_bus e000b000.ps7-eth: scan phy mdio at address 20
- [ 0.856972] mdio_bus e000b000.ps7-eth: scan phy mdio at address 21
- [ 0.857247] mdio_bus e000b000.ps7-eth: scan phy mdio at address 22
- [ 0.857507] mdio_bus e000b000.ps7-eth: scan phy mdio at address 23
- [ 0.865544] mdio_bus e000b000.ps7-eth: scan phy mdio at address 24
- [ 0.865867] mdio_bus e000b000.ps7-eth: scan phy mdio at address 25
- [ 0.866151] mdio_bus e000b000.ps7-eth: scan phy mdio at address 26
- [ 0.866462] mdio_bus e000b000.ps7-eth: scan phy mdio at address 27
- [ 0.867011] mdio_bus e000b000.ps7-eth: scan phy mdio at address 28
- [ 0.867335] mdio_bus e000b000.ps7-eth: scan phy mdio at address 29
- [ 0.867604] mdio_bus e000b000.ps7-eth: scan phy mdio at address 30
- [ 0.867867] mdio_bus e000b000.ps7-eth: scan phy mdio at address 31
- [ 0.940364] macb e000b000.ps7-ethernet eth0: Cadence GEM at 0xe000b000 irq 54 (00:0a:35:00:00:00)
- [ 0.940780] macb e000b000.ps7-ethernet eth0: attached PHY driver [Marvell 88E1111] (mii_bus:phy_addr=e000b000.ps7-eth:00, irq=-1)
- [ 0.944580] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.945242] ehci-pci: EHCI PCI platform driver
- [ 0.949689] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
- [ 0.952909] zynq-dr e0003000.ps7-usb: Unable to init USB phy, missing?
- [ 0.953952] usbcore: registered new interface driver usb-storage
- [ 0.956485] mousedev: PS/2 mouse device common for all mice
- [ 0.957851] i2c /dev entries driver
- [ 0.962223] zynq-edac f8006000.ps7-ddrc: ecc not enabled
- [ 0.966567] Xilinx Zynq CpuIdle Driver started
- [ 0.968320] sdhci: Secure Digital Host Controller Interface driver
- [ 0.968580] sdhci: Copyright(c) Pierre Ossman
- [ 0.968810] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.970580] mmc0: no vqmmc regulator found
- [ 0.970932] mmc0: no vmmc regulator found
- [ 1.009096] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
- [ 1.011053] mmc1: no vqmmc regulator found
- [ 1.011317] mmc1: no vmmc regulator found
- [ 1.049631] mmc1: SDHCI controller on e0101000.ps7-sdio [e0101000.ps7-sdio] using ADMA
- [ 1.056596] usbcore: registered new interface driver usbhid
- [ 1.057165] usbhid: USB HID core driver
- [ 1.062512] TCP: cubic registered
- [ 1.062963] NET: Registered protocol family 17
- [ 1.063646] can: controller area network core (rev 20120528 abi 9)
- [ 1.064776] NET: Registered protocol family 29
- [ 1.065358] can: raw protocol (rev 20120528)
- [ 1.066137] can: broadcast manager protocol (rev 20120528 t)
- [ 1.066959] can: netlink gateway (rev 20130117) max_hops=1
- [ 1.068488] zynq_pm_remap_ocm: OCM pool is not available
- [ 1.070636] zynq_pm_late_init: Unable to map OCM.
- [ 1.071328] Registering SWP/SWPB emulation handler
- [ 1.076327] regulator-dummy: disabling
- [ 1.106063] Freeing unused kernel memory: 196K (c05b6000 - c05e7000)
- INIT: version 2.88 booting
- Starting udev
- [ 1.480992] udevd[538]: starting version 182
- bootlogd: cannot allocate pseudo tty: No such file or directory
- [ 3.073028] random: dd urandom read with 0 bits of entropy available
- Populating dev cache
- hwclock: can't open '/dev/misc/rtc': No such file or directory
- Thu Jan 8 03:16:33 UTC 2015
- hwclock: can't open '/dev/misc/rtc': No such file or directory
- INIT: Entering runlevel: 5
- Configuring network interfaces... udhcpc (v1.22.1) started
- Sending discover...
- [ 5.945771] macb e000b000.ps7-ethernet eth0: unable to generate target frequency: 125000000 Hz
- [ 5.947944] macb e000b000.ps7-ethernet eth0: link up (1000/Full)
- Sending discover...
- Sending select for 10.0.2.15...
- Lease of 10.0.2.15 obtained, lease time 86400
- [ 7.939293] macb e000b000.ps7-ethernet eth0: unable to generate target frequency: 125000000 Hz
- /etc/udhcpc.d/50default: Adding DNS 10.0.2.3
- done.
- hwclock: can't open '/dev/misc/rtc': No such file or directory
- Starting syslogd/klogd: done
- Poky (Yocto Project Reference Distro) 1.7 qemuzynq /dev/ttyPS0
- qemuzynq login: [ 9.939698] macb e000b000.ps7-ethernet eth0: unable to generate target frequency: 125000000 Hz
- [ 11.940557] macb e000b000.ps7-ethernet eth0: unable to generate target frequency: 125000000 Hz
- [ 13.939405] macb e000b000.ps7-ethernet eth0: unable to generate target frequency: 125000000 Hz
- root
- root@qemuzynq:~# root
- -sh: root: not found
- root@qemuzynq:~# [ 15.940016] macb e000b000.ps7-ethernet eth0: unable to generate target frequency: 125000000 Hz
- [ 17.940186] macb e000b000.ps7-ethernet eth0: unable to generate target frequency: 125000000 Hz
- [ 19.940523] macb e000b000.ps7-ethernet eth0: unable to generate target frequency: 125000000 Hz
- [ 21.940746] macb e000b000.ps7-ethernet eth0: unable to generate target frequency: 125000000 Hz
- [ 23.940015] macb e000b000.ps7-ethernet eth0: unable to generate target frequency: 125000000 Hz
- QEMU: Terminated
- Set 'tap0' nonpersistent
- Releasing lockfile of preconfigured tap device 'tap0'
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement