This week only. Pastebin PRO Accounts Christmas Special! Don't miss out!Want more features on Pastebin? Sign Up, it's FREE!
Guest

Untitled

By: a guest on Jun 10th, 2013  |  syntax: None  |  size: 118.53 KB  |  views: 37  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. <6>[    0.000000] Booting Linux on physical CPU 0
  2. <6>[    0.000000] Initializing cgroup subsys cpu
  3. <5>[    0.000000] Linux version 3.4.0-g2a3c34a (shabbypenguin@Minty-Fresh-14) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Wed May 1 18:19:28 EDT 2013
  4. <4>[    0.000000] CPU: ARMv7 Processor [511f06f0] revision 0 (ARMv7), cr=10c5387d
  5. <4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  6. <4>[    0.000000] Machine: SAMSUNG JF
  7. <2>[    0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
  8. <6>[    0.000000] memory pool 3 (start fe2ff000 size 1d00000) initialized
  9. <6>[    0.000000] Initialized persistent memory from 8fd00000-8fdfffff
  10. <4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
  11. <6>[    0.000000] socinfo_init: v7, id=153, ver=2.0, raw_id=1819, raw_ver=1819, hw_plat=8, hw_plat_ver=65536
  12. <6>[    0.000000]  accessory_chip=0, hw_plat_subtype=1, pmic_model=25, pmic_die_revision=1
  13. <6>[    0.000000] sec_getlog_supply_meminfo: 40000000 80000000 0 0
  14. <7>[    0.000000] On node 0 totalpages: 479999
  15. <7>[    0.000000]   Normal zone: 1152 pages used for memmap
  16. <7>[    0.000000]   Normal zone: 0 pages reserved
  17. <7>[    0.000000]   Normal zone: 119424 pages, LIFO batch:31
  18. <7>[    0.000000]   HighMem zone: 2940 pages used for memmap
  19. <7>[    0.000000]   HighMem zone: 356483 pages, LIFO batch:31
  20. <6>[    0.000000] allocating 16908288 bytes at c331a000 (8351a000 physical) for fb
  21. <6>[    0.000000] PERCPU: Embedded 9 pages/cpu @c433d000 s16000 r8192 d12672 u36864
  22. <7>[    0.000000] pcpu-alloc: s16000 r8192 d12672 u36864 alloc=9*4096
  23. <7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  24. <4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 475907
  25. <5>[    0.000000] Kernel command line: androidboot.hardware=qcom user_debug=31 zcache sec_log=0x100000@0xffe00008 sec_dbg=0x80000@0xfff00008 sec_debug.reset_reason=0x1a2b3c00 lcd_attached=1 lcd_id=0x428047 androidboot.debug_level=0x4f4c sec_debug.enable=0 sec_debug.enable_user=0 androidboot.cp_debug_level=0x55FF sec_debug.enable_cp_debug=0 cordon=9d37437f26c1c5bebc3f0adcc84dc79b connie=GT-I9505_OPEN_EUR_799dfd145a310fb716f2138154cde774 sysscope=0xee000000 lpj=67678 loglevel=4 samsung.hardware=GT-I9505 androidboot.emmc_checksum=3 androidboot.bootloader=I9505ZHUAME3 androidboot.nvdata_backup=0 androidboot.boot_recovery=1 androidboot.check_recovery_condition=0x1 level=0x574f4c44 vmalloc=450m sec_pvs=0 batt_id_value=0 androidboot.emmc=true androidboot.serialno=4b120728 androidboot.baseband=mdm
  26. <0>[    0.000000] sec_dbg_setup: str=@0xfff00008
  27. <0>[    0.000000] sec_dbg_setup: secdbg_paddr = 0xfff00008
  28. <0>[    0.000000] sec_dbg_setup: secdbg_size = 0x80000
  29. <6>[    0.000000] lcd_attached_status lcd_attached
  30. <3>[    0.000000] sec_tsp_mode: LCD_ID = 0x428047, val: 0X428047, ret1: 0x8
  31. <6>[    0.000000] sec_tsp_mode : synaptics
  32. <6>[    0.000000] sec_bat_current_boot_mode : recovery
  33. <6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  34. <6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  35. <6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  36. <6>[    0.000000] Memory: 124MB 74MB 18MB 255MB 1403MB = 1874MB total
  37. <5>[    0.000000] Memory: 1861144k/1998360k available, 58852k reserved, 1437692K highmem
  38. <5>[    0.000000] Virtual kernel memory layout:
  39. <5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  40. <5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  41. <5>[    0.000000]     vmalloc : 0xe3000000 - 0xff000000   ( 448 MB)
  42. <5>[    0.000000]     lowmem  : 0xc0000000 - 0xe2e00000   ( 558 MB)
  43. <5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  44. <5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  45. <5>[    0.000000]       .text : 0xc0008000 - 0xc0cdac10   (13132 kB)
  46. <5>[    0.000000]       .init : 0xc0d00000 - 0xc0e03e80   (1040 kB)
  47. <5>[    0.000000]       .data : 0xc0e04000 - 0xc0f5a2c0   (1369 kB)
  48. <5>[    0.000000]        .bss : 0xc0f5a2e4 - 0xc14dde9c   (5647 kB)
  49. <6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  50. <6>[    0.000000] Preemptible hierarchical RCU implementation.
  51. <6>[    0.000000] NR_IRQS:953
  52. <6>[    0.000000] tvec base lock initialized for cpu0
  53. <6>[    0.000000] hrtimer base lock initialized for cpu0
  54. <6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  55. <6>[    0.000000] Console: colour dummy device 80x30
  56. <6>[    0.000000] allocated 4194304 bytes of page_cgroup
  57. <6>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  58. <6>[    0.001312] Calibrating delay loop (skipped) preset value.. 13.53 BogoMIPS (lpj=67678)
  59. <6>[    0.001342] pid_max: default: 32768 minimum: 301
  60. <6>[    0.001586] Security Framework initialized
  61. <6>[    0.001647] SELinux:  Initializing.
  62. <7>[    0.001708] SELinux:  Starting in permissive mode
  63. <6>[    0.001800] Mount-cache hash table entries: 512
  64. <6>[    0.002990] Initializing cgroup subsys debug
  65. <6>[    0.003021] Initializing cgroup subsys cpuacct
  66. <6>[    0.003021] Initializing cgroup subsys memory
  67. <6>[    0.003082] Initializing cgroup subsys freezer
  68. <6>[    0.003112] CPU: Testing write buffer coherency: ok
  69. <6>[    0.003387] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  70. <6>[    0.003417] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  71. <6>[    0.003479] Setting up static identity map for 0x809f6740 - 0x809f67c8
  72. <3>[    0.003509] set_dload_mode <1> ( c0d100e0 )
  73. <6>[    0.004394] tvec base lock initialized for cpu1
  74. <6>[    0.004425] hrtimer base lock initialized for cpu1
  75. <6>[    0.006469] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  76. <6>[    0.006866] tvec base lock initialized for cpu2
  77. <6>[    0.006866] hrtimer base lock initialized for cpu2
  78. <6>[    0.008148] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  79. <6>[    0.008514] tvec base lock initialized for cpu3
  80. <6>[    0.008544] hrtimer base lock initialized for cpu3
  81. <6>[    0.009796] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  82. <6>[    0.009887] Brought up 4 CPUs
  83. <6>[    0.009918] SMP: Total of 4 processors activated (54.14 BogoMIPS).
  84. <6>[    0.026306] dummy:
  85. <6>[    0.026641] NET: Registered protocol family 16
  86. <3>[    0.028472] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  87. <3>[    0.028839] MSM_DCVS: msm_dcvs_early_init: Unable to initialize DCVS err=4
  88. <0>[    0.031524] sec_debug_init: enable=0
  89. <0>[    0.031524] sec_debug_init: restart_reason : 0xfa00a65c
  90. <6>[    0.031555] meminfo_init: smem ram ptable found: ver: 0 len: 6
  91. <6>[    0.031555] Found 2 memory banks grouped into 16 memory regions
  92. <6>[    0.031738] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
  93. <6>[    0.032440] socinfo_init: v7, id=153, ver=2.0, raw_id=1819, raw_ver=1819, hw_plat=8, hw_plat_ver=65536
  94. <6>[    0.032440]  accessory_chip=0, hw_plat_subtype=1, pmic_model=25, pmic_die_revision=1
  95. <6>[    0.032562] msm_rpm_init: RPM firmware 3.0.16842920
  96. <3>[    0.050415] msm_rpm_get_status(): Status id 433 not defined for target
  97. <3>[    0.050445] msm_rpm_get_status(): Status id 433 not defined for target
  98. <3>[    0.050445] msm_rpm_get_status(): Status id 433 not defined for target
  99. <3>[    0.050445] msm_rpm_get_status(): Status id 433 not defined for target
  100. <3>[    0.050476] msm_rpm_get_status(): Status id 433 not defined for target
  101. <3>[    0.050476] msm_rpm_get_status(): Status id 433 not defined for target
  102. <3>[    0.050506] msm_rpm_get_status(): Status id 433 not defined for target
  103. <3>[    0.050506] msm_rpm_get_status(): Status id 433 not defined for target
  104. <6>[    0.066619] cypress gpio init in apq8064_init_gpiomux
  105. <6>[    0.066650] apq8064_init_gpiomux: config touch_irq config.
  106. <6>[    0.067565] gpio_vreg_probe: id=203, name=ext_mpp8, gpio=203, gpio_label=ext_mpp8_en
  107. <6>[    0.067871] gpio_vreg_probe: id=77, name=ext_3p3v, gpio=77, gpio_label=ext_3p3v_en
  108. <6>[    0.068084] pm8921_probe: PMIC revision 1: F1
  109. <6>[    0.068115] pm8921_probe: PMIC revision 2: 0C
  110. <6>[    0.068115] pm8921_probe: PMIC version: PM8917 rev 1.0
  111. <6>[    0.068145] pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)
  112. <6>[    0.069122] gpiochip_add: registered GPIOs 152 to 189 on device: pm-gpio
  113. <6>[    0.069549] pm_gpio_probe: OK: base=152, ngpio=38
  114. <6>[    0.069824] gpiochip_add: registered GPIOs 196 to 205 on device: pm8xxx-mpp
  115. <6>[    0.069885] pm8xxx_mpp_probe: OK: base=196, ngpio=10
  116. <6>[    0.074768] pm8821_probe: PMIC revision 1: PM8821 rev F3
  117. <6>[    0.074798] pm8821_probe: PMIC revision 2: PM8821 rev 0B
  118. <6>[    0.074798] pm8821_probe: PMIC version: PM8821 ver 2.1
  119. <6>[    0.075317] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
  120. <6>[    0.075347] pm8xxx_mpp_probe: OK: base=208, ngpio=4
  121. <6>[    0.075775] gpio_vreg_probe: id=174, name=ext_ts_sw, gpio=174, gpio_label=ext_ts_sw_en
  122. <6>[    0.076904] saw_probe: id=0, name=8921_s5
  123. <6>[    0.077178] saw_probe: id=1, name=8921_s6
  124. <6>[    0.077453] saw_probe: id=2, name=8821_s0
  125. <6>[    0.077758] saw_probe: id=3, name=8821_s1
  126. <6>[    0.084930] persistent_ram: no valid data in buffer (sig = 0x00000000)
  127. <6>[    0.087066] console [ram0] enabled
  128. <6>[    0.088073] apq8064_init_mmc: SDC4 is for Externel SD in system_rev 11
  129. <7>[    0.088256] [slimbus] starting init set up : 11 0
  130. <6>[    0.089294] samsung sys class init.
  131. <6>[    0.089355] samsung sys class end.
  132. <7>[    0.089538] [TSP] System revision, LPM mode : 11 0
  133. <7>[    0.089569] [TSP]START S5000_tsp_input_init
  134. <6>[    0.089569] S5000_tsp_input_init: synaptics : el_type : 0, touch_type = 8[normal mode]
  135. <7>[    0.089599] [TSP]END S5000_tsp_input_init
  136. <6>[    0.090332] [lcd] apq8064_init_fb
  137. <7>[    0.092010] [JC] apq8064_init_cam: In
  138. <7>[    0.092254] [S5K6B2YX] apq8064_init_cam: GPIO_CAM_VT_EN: 0
  139. <6>[    0.094116] [SSP] clear_ssp_gpio done
  140. <6>[    0.094116] [SSP]sensor_power_on_vdd
  141. <3>[    0.095336] sensor_power_on_vdd: done
  142. <6>[    0.095458] [SSP]initialize_ssp_gpio
  143. <6>[    0.095794] bcm2079x_sw_i2c_config is called
  144. <6>[    0.095794] [NFC] bcm2079x_init done
  145. <6>[    0.146118] =[ES325]=es325_start_api=====
  146. <6>[    0.146148] brcm_wlan_init: start
  147. <6>[    0.146209] brcm_init_wlan_mem: WIFI MEM Allocated
  148. <4>[    0.147674] ------------[ cut here ]------------
  149. <4>[    0.147705] WARNING: at /home/shabbypenguin/Android/CM/kernel/samsung/jf/arch/arm/mach-msm/subsystem_restart.c:578 subsys_restart_init+0xe4/0x110()
  150. <4>[    0.147705] Modules linked in:
  151. <4>[    0.147766] [<c0013944>] (unwind_backtrace+0x0/0x11c) from [<c0072a74>] (warn_slowpath_common+0x4c/0x64)
  152. <4>[    0.147796] [<c0072a74>] (warn_slowpath_common+0x4c/0x64) from [<c0072aa4>] (warn_slowpath_null+0x18/0x1c)
  153. <4>[    0.147827] [<c0072aa4>] (warn_slowpath_null+0x18/0x1c) from [<c0d0b068>] (subsys_restart_init+0xe4/0x110)
  154. <4>[    0.147827] [<c0d0b068>] (subsys_restart_init+0xe4/0x110) from [<c00086fc>] (do_one_initcall+0x90/0x160)
  155. <4>[    0.147857] [<c00086fc>] (do_one_initcall+0x90/0x160) from [<c0d00a9c>] (kernel_init+0xe8/0x1a4)
  156. <4>[    0.147888] [<c0d00a9c>] (kernel_init+0xe8/0x1a4) from [<c000ef28>] (kernel_thread_exit+0x0/0x8)
  157. <4>[    0.147949] ---[ end trace da227214a82491b7 ]---
  158. <3>[    0.150970] i2c i2c-4: Failed to register i2c client s5k3l1yx at 0x34 (-16)
  159. <3>[    0.151153] i2c i2c-4: Can't create device at 0x34
  160. <6>[    0.152587] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
  161. <6>[    0.152618] sps:BAM 0x12244000 is registered.
  162. <6>[    0.153167] sps:sps is ready.
  163. <6>[    0.181701] bio: create slab <bio-0> at 0
  164. <6>[    0.182495] ION heap vmalloc created
  165. <6>[    0.182525] ION heap mm created at a0000000 with size 6600000
  166. <6>[    0.182556] ION heap mm_fw created at 9fe00000 with size 1e0000
  167. <6>[    0.182586] ION heap mfc created at a6600000 with size 2000
  168. <6>[    0.182617] ION heap iommu created
  169. <6>[    0.182678] ION heap qsecom created at fe2ff000 with size 1700000
  170. <6>[    0.182739] ION heap audio created at ff9ff000 with size 4cf000
  171. <5>[    0.184204] SCSI subsystem initialized
  172. <6>[    0.184356] ++++MSM SB controller is up!
  173. <6>[    0.184509] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31
  174. <6>[    0.184539] sps:BAM 0x28084000 is registered.
  175. <6>[    0.185150] ----MSM SB controller is up!
  176. <6>[    0.185455] usbcore: registered new interface driver usbfs
  177. <6>[    0.185546] usbcore: registered new interface driver hub
  178. <6>[    0.185668] usbcore: registered new device driver usb
  179. <6>[    0.186004] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input0
  180. <6>[    0.186492] wrapper slim_rxwq eaddr  0: 5:50: 0:17: 2 [laddr=0]
  181. <6>[    0.186553] wrapper slim_rxwq eaddr  0: 1:50: 0:17: 2 [laddr=1]
  182. <6>[    0.186614] wrapper slim_rxwq eaddr  0: 0:50: 0:17: 2 [laddr=2]
  183. <6>[    0.186676] wrapper slim_rxwq eaddr  0: 1: 2: 0:be: 2 [laddr=3]
  184. <6>[    0.186706] wrapper slim_rxwq es325 eaddr recv and apply temporary workaround
  185. <6>[    0.186767] wrapper msm_slim_rxwq assign laddr  1 ret=0
  186. <6>[    0.186828] wrapper msm_slim_rxwq assign laddr  0 ret=0
  187. <6>[    0.186859] wrapper slim_rxwq eaddr  0: 0: 2: 0:be: 2 [laddr=4]
  188. <3>[    0.186889] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:3 report inf element:0x0
  189. <3>[    0.187133] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
  190. <3>[    0.187377] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:4 report inf element:0x400
  191. <6>[    0.187500] max77693_i2c_probe: device found: rev.0x3, ver.0x0
  192. <3>[    0.187530] param_sec_operation: filp_open failed. (-2)
  193. <3>[    0.187530] sec_open_param PARAM OPEN FAIL
  194. <3>[    0.188140] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
  195. <6>[    0.260528] max77693-safeout max77693-safeout: max77693_pmic_probe
  196. <6>[    0.260620] [/home/shabbypenguin/Android/CM/kernel/samsung/jf/drivers/regulator/max77693-regulator.c:488] pdata->num_regulators:3
  197. <6>[    0.260620] [/home/shabbypenguin/Android/CM/kernel/samsung/jf/drivers/regulator/max77693-regulator.c:494] for in pdata->num_regulators:3
  198. <6>[    0.260742] regulator regulator.64: func:max77693_reg_enable
  199. <6>[    0.260772] regulator regulator.64: func:max77693_get_rid
  200. <6>[    0.260772] regulator regulator.64: func:max77693_get_enable_register
  201. <6>[    0.261657] regulator regulator.64: func:max77693_get_voltage
  202. <6>[    0.261688] regulator regulator.64: func:max77693_get_rid
  203. <6>[    0.261688] regulator regulator.64: func:max77693_get_voltage_register
  204. <6>[    0.262207] regulator regulator.64: func:max77693_get_rid
  205. <6>[    0.262207] regulator regulator.64: func:max77693_list_voltage_safeout
  206. <3>[    0.262359] Error-Bad Function Input
  207. <6>[    0.262542] [/home/shabbypenguin/Android/CM/kernel/samsung/jf/drivers/regulator/max77693-regulator.c:494] for in pdata->num_regulators:3
  208. <6>[    0.262634] regulator regulator.65: func:max77693_get_voltage
  209. <6>[    0.262634] regulator regulator.65: func:max77693_get_rid
  210. <6>[    0.262664] regulator regulator.65: func:max77693_get_voltage_register
  211. <6>[    0.263153] regulator regulator.65: func:max77693_get_rid
  212. <6>[    0.263183] regulator regulator.65: func:max77693_list_voltage_safeout
  213. <3>[    0.263305] Error-Bad Function Input
  214. <6>[    0.263397] [/home/shabbypenguin/Android/CM/kernel/samsung/jf/drivers/regulator/max77693-regulator.c:494] for in pdata->num_regulators:3
  215. <6>[    0.263488] regulator regulator.66: func:max77693_reg_enable
  216. <6>[    0.263519] regulator regulator.66: func:max77693_get_rid
  217. <6>[    0.263519] regulator regulator.66: func:max77693_get_enable_register
  218. <6>[    0.264678] i2c-gpio i2c-gpio.12: using pins 22 (SDA) and 23 (SCL)
  219. <6>[    0.264953] i2c-gpio i2c-gpio.13: using pins 205 (SDA) and 204 (SCL)
  220. <6>[    0.265167] i2c-gpio i2c-gpio.21: using pins 6 (SDA) and 7 (SCL)
  221. <6>[    0.265350] i2c-gpio i2c-gpio.17: using pins 10 (SDA) and 11 (SCL)
  222. <6>[    0.265838] i2c-gpio i2c-gpio.9: using pins 36 (SDA) and 37 (SCL)
  223. <6>[    0.266052] i2c-gpio i2c-gpio.16: using pins 33 (SDA) and 26 (SCL)
  224. <6>[    0.266265] i2c-gpio i2c-gpio.11: using pins 0 (SDA) and 1 (SCL)
  225. <6>[    0.266387] Linux media interface: v0.10
  226. <6>[    0.266448] Linux video capture interface: v2.00
  227. <6>[    0.267211] msm_iommu_dev: device vpe mapped at e3400000, with 2 ctx banks
  228. <6>[    0.267333] msm_iommu_dev: device mdp0 mapped at e3600000, with 2 ctx banks
  229. <6>[    0.267456] msm_iommu_dev: device mdp1 mapped at e3800000, with 2 ctx banks
  230. <6>[    0.267578] msm_iommu_dev: device rot mapped at e3a00000, with 2 ctx banks
  231. <6>[    0.267700] msm_iommu_dev: device ijpeg mapped at e3c00000, with 2 ctx banks
  232. <6>[    0.267791] msm_iommu_dev: device vfe mapped at e3e00000, with 2 ctx banks
  233. <6>[    0.267913] msm_iommu_dev: device vcodec_a mapped at e4000000, with 2 ctx banks
  234. <6>[    0.268035] msm_iommu_dev: device vcodec_b mapped at e4200000, with 2 ctx banks
  235. <6>[    0.268157] msm_iommu_dev: device gfx3d mapped at e4400000, with 3 ctx banks
  236. <6>[    0.268280] msm_iommu_dev: device jpegd mapped at e4600000, with 2 ctx banks
  237. <6>[    0.268432] msm_iommu_dev: device gfx3d1 mapped at e4800000, with 3 ctx banks
  238. <6>[    0.268554] msm_iommu_dev: device vcap mapped at e4a00000, with 2 ctx banks
  239. <6>[    0.268920] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
  240. <6>[    0.269073] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
  241. <6>[    0.269195] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
  242. <6>[    0.269348] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
  243. <6>[    0.269500] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
  244. <6>[    0.269653] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
  245. <6>[    0.269805] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
  246. <6>[    0.269927] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
  247. <6>[    0.270050] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
  248. <6>[    0.270202] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
  249. <6>[    0.270355] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
  250. <6>[    0.270477] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
  251. <6>[    0.270599] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
  252. <6>[    0.270782] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
  253. <6>[    0.270965] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
  254. <6>[    0.271179] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
  255. <6>[    0.271392] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
  256. <6>[    0.271545] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
  257. <6>[    0.271636] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
  258. <6>[    0.271881] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
  259. <6>[    0.272064] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
  260. <6>[    0.272216] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
  261. <6>[    0.272338] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
  262. <6>[    0.272399] [SENSORS CORE] sensors_class_init
  263. <6>[    0.272552] Advanced Linux Sound Architecture Driver Version 1.0.25.
  264. <6>[    0.273040] Bluetooth: Core ver 2.16
  265. <6>[    0.273101] NET: Registered protocol family 31
  266. <6>[    0.273101] Bluetooth: HCI device and connection manager initialized
  267. <6>[    0.273101] Bluetooth: HCI socket layer initialized
  268. <6>[    0.273132] Bluetooth: L2CAP socket layer initialized
  269. <6>[    0.273345] Bluetooth: SCO socket layer initialized
  270. <6>[    0.273620] cfg80211: Calling CRDA to update world regulatory domain
  271. <6>[    0.275421] Switching to clocksource gp_timer
  272. <6>[    0.307586] NET: Registered protocol family 2
  273. <6>[    0.307830] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  274. <6>[    0.308319] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  275. <6>[    0.308929] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  276. <6>[    0.309600] TCP: Hash tables configured (established 65536 bind 65536)
  277. <6>[    0.309600] TCP: reno registered
  278. <6>[    0.309631] UDP hash table entries: 256 (order: 1, 8192 bytes)
  279. <6>[    0.309631] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  280. <6>[    0.309936] NET: Registered protocol family 1
  281. <6>[    0.310333] RPC: Registered named UNIX socket transport module.
  282. <6>[    0.310363] RPC: Registered udp transport module.
  283. <6>[    0.310363] RPC: Registered tcp transport module.
  284. <6>[    0.310363] RPC: Registered tcp NFSv4.1 backchannel transport module.
  285. <6>[    0.310638] Trying to unpack rootfs image as initramfs...
  286. <6>[    0.492919] Freeing initrd memory: 3172K
  287. <6>[    0.495178] Detected 9 counters on the L2CC PMU.
  288. <6>[    0.496704] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
  289. <3>[    0.499023] smd_channel_probe_worker: allocation table not initialized
  290. <6>[    0.504028] NET: Registered protocol family 27
  291. <6>[    0.507293] lpass_fatal_init: lpass SSR driver init'ed.
  292. <6>[    0.508148] acpuclk-8064 acpuclk-8064: SPEED BIN: 2
  293. <6>[    0.508148] acpuclk-8064 acpuclk-8064: ACPU PVS: 1
  294. <6>[    0.510437] acpuclk-8064 acpuclk-8064: CPU0: 15 frequencies supported
  295. <6>[    0.510467] acpuclk-8064 acpuclk-8064: CPU1: 15 frequencies supported
  296. <6>[    0.510467] acpuclk-8064 acpuclk-8064: CPU2: 15 frequencies supported
  297. <6>[    0.510498] acpuclk-8064 acpuclk-8064: CPU3: 15 frequencies supported
  298. <4>[    0.510772] ####init
  299. <5>[    0.512054] msm_rpm_log_probe: OK
  300. <3>[    0.514862] mdm_do_first_power_on: Powering on modem for the first time
  301. <6>[    0.583709] mdm_pblrdy_change: pbl ready:1
  302. <6>[    0.786102] mdm_common_create: Registering mdm modem
  303. <6>[    0.787322] usbcore: registered new interface driver hsic_sysmon
  304. <6>[    0.787658] sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading
  305. <6>[    0.788330] sec_getlog_supply_kloginfo: 0xc0fed8dc
  306. <6>[    0.788604] audit: initializing netlink socket (enabled)
  307. <4>[    0.790100] highmem bounce pool size: 64 pages
  308. <6>[    0.799774] Registering sdcardfs 0.1
  309. <5>[    0.799957] NFS: Registering the id_resolver key type
  310. <6>[    0.801208] fuse init (API version 7.18)
  311. <6>[    0.801513] msgmni has been set to 833
  312. <7>[    0.801574] SELinux:  Registering netfilter hooks
  313. <6>[    0.805969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  314. <6>[    0.806030] io scheduler noop registered
  315. <6>[    0.806030] io scheduler deadline registered (default)
  316. <6>[    0.806427] io scheduler cfq registered
  317. <6>[    0.810760] mipi_dsi base phy_addr = 0x4700000 virt = 0xe4d00000
  318. <6>[    0.810821] mmss_sfpb  base phy_addr = 0x5700000,virt = 0xe31bc000
  319. <6>[    0.811126] [lcd] mipi_samsung_disp_init start
  320. <6>[    0.811584] [lcd] mipi_samsung_disp_probe start
  321. <6>[    0.811584] [lcd] pdev->id =0,  pdev-name = mipi_samsung_full_hd
  322. <6>[    0.811614] [lcd] mipi_samsung_disp_probe end since pdev-id is 0
  323. <7>[    0.811798] [lcd] mipi_video_samsung_octa_full_hd_pt_init start
  324. <6>[    0.811828] get_ldi_chip : 1 LSI
  325. <6>[    0.811859] [lcd] mipi_samsung_device_register start
  326. <6>[    0.812194] [lcd] mipi_samsung_disp_probe start
  327. <6>[    0.812225] [lcd] msm_fb_add_device : mipi_samsung_full_hd
  328. <6>[    0.822143] FrameBuffer[0] 1080x1920 size=16711680 bytes is registered successfully!
  329. <7>[    0.822631] Registered led device: lcd-backlight
  330. <6>[    0.822723] mdp4_reg_csc_fs: kobject_uevent(KOBJ_ADD)
  331. <6>[    0.822784] sec_getlog_supply_fbinfo: 0x 8351a000 1088 1920 32 2
  332. <6>[    0.822845] [lcd] lcd_device_register for panel start
  333. <6>[    0.822967] [lcd] backlight_device_register for panel start
  334. <6>[    0.823089] [mipi_samsung_disp_probe] CONFIG_MDNIE_LITE_TUNING ok ! init class called!
  335. <3>[    0.823089] [mdnie lite] start!
  336. <3>[    0.823333] [mdnie lite] end!
  337. <6>[    0.823425] [lcd] mipi_samsung_disp_probe end
  338. <6>[    0.823455] [lcd] mipi_samsung_device_register end
  339. <7>[    0.823455] mipi_video_samsung_octa_full_hd_pt_init: get_lcd_attached(1)!
  340. <7>[    0.823486] [lcd] mipi_video_samsung_octa_full_hd_pt_init end
  341. <7>[    0.823486] [lcd] mipi_video_magna_octa_full_hd_pt_init start
  342. <6>[    0.823486] get_ldi_chip : 1 LSI
  343. <6>[    0.825714] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
  344. <6>[    0.826171] mdp4_dtv_vsync_init: ndx=0
  345. <3>[    0.826293] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group dda96e08
  346. <6>[    0.826416] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Disabled
  347. <3>[    0.827117] Inside writeback_driver_init
  348. <3>[    0.827575] Inside writeback_probe
  349. <6>[    0.828308] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully!
  350. <6>[    0.829803]
  351. <6>[    0.829803]  msm_vidc_enc: Inside vid_enc_init()
  352. <6>[    0.830017]
  353. <6>[    0.830017]  msm_vidc_enc: Inside vid_enc_vcd_init()
  354. <6>[    0.830841] input: sii8240_rcp as /devices/virtual/input/input1
  355. <6>[    0.833282] msm_serial: driver initialized
  356. <6>[    0.833892] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  357. <6>[    0.834197] msm_serial_hs module loaded
  358. <6>[    0.834442] msm_serial_hsl: detected port #1
  359. <6>[    0.834564] msm_serial_hsl.1: ttyHSL1 at MMIO 0x12450000 (irq = 225) is a MSM
  360. <6>[    0.834777] msm_serial_hsl: detected port #0
  361. <6>[    0.834808] msm_serial_hsl_probe: Found wakeup gpio 83
  362. <6>[    0.835021] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16640000 (irq = 190) is a MSM
  363. <6>[    0.835083] msm_serial_hsl: console setup on port #0
  364. <6>[    1.032592] console [ttyHSL0] enabled
  365. <6>[    1.032836] msm_serial_hsl: driver initialized
  366. <6>[    1.034393] msm_rotator_probe: rotator_hw_revision=2
  367. <6>[    1.037750] diagchar initialized now
  368. <6>[    1.039123] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  369. <6>[    1.047515] brd: module loaded
  370. <6>[    1.051361] loop: module loaded
  371. <6>[    1.053131] init tzic
  372. <6>[    1.053344] bcm2079x-i2c 17-0077: bcm2079x_probe, probing bcm2079x driver flags = 0
  373. <6>[    1.053527] bcm2079x-i2c 17-0077: requesting IRQ 660 with IRQF_NO_SUSPEND
  374. <6>[    1.053710] bcm2079x-i2c 17-0077: bcm2079x_probe, probing bcm2079x driver exited successfully
  375. <6>[    1.054077] func:max77693_muic_init
  376. <6>[    1.054443] func:max77693_muic_probe
  377. <6>[    1.054473] max77693-muic max77693-muic: adc:871 chgtype:875, adc1k874
  378. <6>[    1.054656] input: max77693-muic as /devices/platform/i2c-gpio.12/i2c-12/12-0066/max77693-muic/input/input2
  379. <6>[    1.054809] MUIC ret=0
  380. <6>[    1.054840] max77693-muic max77693-muic: func:max77693_muic_set_adcdbset value:2
  381. <6>[    1.054840] max77693-muic max77693-muic: max77693_muic_set_adcdbset: ADCDBSET(0x20)
  382. <6>[    1.056823] max77693_muic_probe: CDETCTRL1(0x0d)
  383. <6>[    1.057495] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x0 CABLE:19
  384. <6>[    1.057525] max77693-muic max77693-muic: func:max77693_muic_irq_init
  385. <6>[    1.068939] max77693-muic max77693-muic: adc:871 chgtype:875 adc1k:874 vbvolt:879
  386. <6>[    1.069488] max77693-muic max77693-muic: max77693_muic_irq_init: reg=7, val=9
  387. <6>[    1.070037] max77693-muic max77693-muic: max77693_muic_irq_init: reg=8, val=11
  388. <6>[    1.070587] max77693-muic max77693-muic: max77693_muic_irq_init: reg=9, val=0
  389. <6>[    1.071136] max77693-muic max77693-muic: max77693_muic_irq_init: reg=1, val=0
  390. <6>[    1.071685] max77693-muic max77693-muic: max77693_muic_irq_init: reg=2, val=0
  391. <6>[    1.072265] max77693-muic max77693-muic: max77693_muic_irq_init: reg=3, val=0
  392. <6>[    1.072814] max77693_set_jig_state: 0
  393. <6>[    1.072937] tabla-slim tabla-slim: Platform data from board file
  394. <6>[    1.107269] wrapper slim_rxwq eaddr  0: 1:60: 0:17: 2 [laddr=5]
  395. <6>[    1.107360] wrapper slim_rxwq eaddr  0: 0:60: 0:17: 2 [laddr=6]
  396. <6>[    1.107360] wrapper newly pm_runtime_enable
  397. <6>[    1.116851] max77693-muic:max77693_muic_dock_detect CONTROL1:0
  398. <6>[    1.117492] max77693-muic:max77693_muic_dock_detect STATUS1:0x3f, 2:0x0
  399. <6>[    1.117523] max77693-muic:max77693_muic_dock_detect adc:1f adcerr:0 chgtyp:0 vb:0 dxovp:0 cable_type:19
  400. <3>[    1.236846] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
  401. <6>[    1.246856] tabla2x-slim tabla2x-slim: Platform data from board file
  402. <6>[    1.278015] wrapper slim_rxwq eaddr  0: 1:60: 0:17: 2 [laddr=5]
  403. <6>[    1.278106] wrapper slim_rxwq eaddr  0: 0:60: 0:17: 2 [laddr=6]
  404. <6>[    1.313232] wcd9xxx_check_codec_type: codec is tabla_codec
  405. <6>[    1.313262] wcd9xxx_check_codec_type: Read codec idbytes & version
  406. <6>[    1.313293] byte_0[00000002] byte_1[00000000] byte_2[00000000]
  407. <6>[    1.313293]  byte_3[00000001] version = 2
  408. <4>[    1.314483] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  409. <4>[    1.314514] i2c-core: driver [tabla-i2c-core] using legacy resume method
  410. <6>[    1.316467] SCSI Media Changer driver v0.25
  411. <6>[    1.317321] spi_qsd spi_qsd.0: master is unqueued, this is deprecated
  412. <6>[    1.319549] tun: Universal TUN/TAP device driver, 1.6
  413. <6>[    1.319549] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  414. <6>[    1.322418] PPP generic driver version 2.4.2
  415. <6>[    1.322662] PPP BSD Compression module registered
  416. <6>[    1.322692] PPP Deflate Compression module registered
  417. <6>[    1.324615] modprobe (110): undefined instruction: pc=40146f7c
  418. <6>[    1.324676] Code: e3a01000 e3520084 8a000016 e92d0001 (eee01b10)
  419. <6>[    1.326690] modprobe (112): undefined instruction: pc=40164f7c
  420. <6>[    1.326721] Code: e3a01000 e3520084 8a000016 e92d0001 (eee01b10)
  421. <6>[    1.327789] PPP MPPE Compression module registered
  422. <6>[    1.327819] NET: Registered protocol family 24
  423. <6>[    1.327850] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  424. <6>[    1.327880] CSLIP: code copyright 1989 Regents of the University of California.
  425. <6>[    1.328033] usbcore: registered new interface driver asix
  426. <6>[    1.328216] usbcore: registered new interface driver cdc_ether
  427. <6>[    1.328338] usbcore: registered new interface driver net1080
  428. <6>[    1.328491] usbcore: registered new interface driver cdc_subset
  429. <6>[    1.328613] usbcore: registered new interface driver zaurus
  430. <6>[    1.329071] usbcore: registered new interface driver cdc_ncm
  431. <6>[    1.329223] usbcore: registered new interface driver rmnet_usb
  432. <6>[    1.330596] rmnet usb ctrl Initialized.
  433. <6>[    1.330810] msm_otg msm_otg: msm_otg probe
  434. <3>[    1.330871] msm_otg msm_otg: failed to get phy_clk
  435. <6>[    1.334899] msm_otg msm_otg: OTG regs = e31d8000
  436. <7>[    1.334930] msm_otg msm_otg: platform_get_irq for async_int failed
  437. <6>[    1.335479] msm_hsusb_config_vddcx: min_vol:1045000 max_vol:1320000
  438. <6>[    1.336853] reg (HPM)
  439. <7>[    1.337463] msm_otg msm_otg: MHL device name does not exist.
  440. <7>[    1.337493] msm_otg msm_otg: MHL can not be supported
  441. <6>[    1.337890] msm_otg msm_otg: success to host_notify_dev_register
  442. <7>[    1.337951] msm_otg msm_otg: OTG runtime idle
  443. <6>[    1.338256] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  444. <7>[    1.338287] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
  445. <7>[    1.338409] msm_hsusb_host msm_hsusb_host: ehci_msm proble
  446. <7>[    1.338470] msm_otg msm_otg: host driver registered w/ tranceiver
  447. <7>[    1.339050] msm_hsic_host msm_hsic_host: ehci_msm-hsic probe
  448. <7>[    1.339111] msm_hsic_host msm_hsic_host: wakeup_irq: 335
  449. <6>[    1.351562] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
  450. <6>[    1.351593] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
  451. <7>[    1.351623] msm_hsic_host msm_hsic_host: reset hcs_params 0x10011 dbg=0 ind cc=0 pcc=0 ordered ports=1
  452. <7>[    1.351654] msm_hsic_host msm_hsic_host: reset hcc_params 0006 thresh 0 uframes 256/512/1024 park
  453. <7>[    1.351715] msm_hsic_host msm_hsic_host: park 0
  454. <7>[    1.351745] msm_hsic_host msm_hsic_host: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  455. <7>[    1.351745] msm_hsic_host msm_hsic_host: ...powerup ports...
  456. <6>[    1.376037] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
  457. <7>[    1.376068] msm_hsic_host msm_hsic_host: init command 0200005 (park)=0 ithresh=32 period=512 RUN
  458. <6>[    1.395996] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
  459. <7>[    1.396240] usb usb1: default language 0x0409
  460. <7>[    1.396331] usb usb1: udev 1, busnum 1, minor = 0
  461. <6>[    1.396362] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  462. <6>[    1.396362] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  463. <6>[    1.396392] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
  464. <6>[    1.396392] usb usb1: Manufacturer: Linux 3.4.0-g2a3c34a ehci_hcd
  465. <6>[    1.396423] usb usb1: SerialNumber: msm_hsic_host
  466. <7>[    1.396667] usb usb1: usb_probe_device
  467. <7>[    1.396697] usb usb1: configuration #1 chosen from 1 choice
  468. <7>[    1.396759] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  469. <7>[    1.396911] hub 1-0:1.0: usb_probe_interface
  470. <7>[    1.396911] hub 1-0:1.0: usb_probe_interface - got id
  471. <6>[    1.396942] hub 1-0:1.0: USB hub found
  472. <6>[    1.397003] hub 1-0:1.0: 1 port detected
  473. <7>[    1.397003] hub 1-0:1.0: standalone hub
  474. <7>[    1.397003] hub 1-0:1.0: individual port power switching
  475. <7>[    1.397033] hub 1-0:1.0: individual port over-current protection
  476. <7>[    1.397033] hub 1-0:1.0: Single TT
  477. <7>[    1.397064] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
  478. <7>[    1.397064] hub 1-0:1.0: power on to power good time: 20ms
  479. <7>[    1.397125] hub 1-0:1.0: local power source is good
  480. <7>[    1.397155] hub 1-0:1.0: enabling power on all ports
  481. <6>[    1.398864] usbcore: registered new interface driver cdc_acm
  482. <6>[    1.398864] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  483. <6>[    1.398986] usbcore: registered new interface driver usblp
  484. <6>[    1.398986] Initializing USB Mass Storage driver...
  485. <6>[    1.399108] usbcore: registered new interface driver usb-storage
  486. <6>[    1.399108] USB Mass Storage support registered.
  487. <6>[    1.399200] usbcore: registered new interface driver ums-alauda
  488. <6>[    1.399291] usbcore: registered new interface driver ums-cypress
  489. <6>[    1.399353] usbcore: registered new interface driver ums-datafab
  490. <6>[    1.399444] usbcore: registered new interface driver ums-freecom
  491. <6>[    1.399505] usbcore: registered new interface driver ums-isd200
  492. <6>[    1.399597] usbcore: registered new interface driver ums-jumpshot
  493. <6>[    1.399688] usbcore: registered new interface driver ums-karma
  494. <6>[    1.399749] usbcore: registered new interface driver ums-onetouch
  495. <6>[    1.399841] usbcore: registered new interface driver ums-sddr09
  496. <6>[    1.399932] usbcore: registered new interface driver ums-sddr55
  497. <6>[    1.399993] usbcore: registered new interface driver ums-usbat
  498. <6>[    1.400146] usbcore: registered new interface driver usbserial
  499. <6>[    1.400177] usbserial: USB Serial Driver core
  500. <6>[    1.400268] usbcore: registered new interface driver pl2303
  501. <6>[    1.400299] USB Serial support registered for pl2303
  502. <6>[    1.400390] usbcore: registered new interface driver qc_csvt
  503. <6>[    1.400451] USB Serial support registered for qc_csvt
  504. <6>[    1.400543] usbcore: registered new interface driver usb_ehset_test
  505. <6>[    1.400634] usbcore: registered new interface driver diag_bridge
  506. <6>[    1.400756] usbcore: registered new interface driver mdm_bridge
  507. <6>[    1.401367] usbcore: registered new interface driver ks_bridge
  508. <6>[    1.401367] ksb_init: init done
  509. <7>[    1.401611] msm_otg msm_otg: peripheral driver registered w/ tranceiver
  510. <7>[    1.401672] UNDEFINED work
  511. <6>[    1.401702] msm_otg msm_otg: phy_reset: success
  512. <6>[    1.402282] usb: android_probe pdata: c0e7e514
  513. <6>[    1.402465] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
  514. <7>[    1.402587] usb: android_bind disconnect
  515. <6>[    1.402618] usb:: ci13xxx_pullup is_active: 0
  516. <6>[    1.402618] usb:: ci13xxx_pullup udc->udc_driver->flags:3f
  517. <6>[    1.402618] usb:: ci13xxx_pullup !udc->vbus_active:1, !udc->driver:1
  518. <7>[    1.403961] [mtp_setup]   line = [1592]
  519. <6>[    1.404693] android_usb gadget: Mass Storage Function, version: 2009/09/11
  520. <6>[    1.404693] android_usb gadget: Number of LUNs=1
  521. <6>[    1.404724]  lun0: LUN: removable file: (no medium)
  522. <6>[    1.405090] android_bind : serial_string: 0123456789ABCDEF
  523. <7>[    1.405090] usb: composite_bind idVendor=0x0, idProduct=0x0
  524. <7>[    1.405120] usb: composite_bind bcdDevice=0x0
  525. <7>[    1.405120] usb: composite_bind composite_manufacturer=
  526. <6>[    1.405151] android_usb gadget: android_usb ready
  527. <6>[    1.405883] mousedev: PS/2 mouse device common for all mice
  528. <6>[    1.407135] usbcore: registered new interface driver xpad
  529. <6>[    1.407836] synaptics_power_onoff: enable l17
  530. <6>[    1.408569] synaptics_power_onoff: enable l22
  531. <7>[    1.496429] msm_hsic_host msm_hsic_host: GetStatus port:1 status 80001803 64  ACK POWER sig=j CSC CONNECT
  532. <7>[    1.496459] hub 1-0:1.0: port 1: status 0101 change 0001
  533. <3>[    1.506042] couldn't get usb power supply
  534. <7>[    1.509185] msm_otg msm_otg: OTG runtime suspend
  535. <6>[    1.510650] reg (LPM)
  536. <6>[    1.510650] msm_hsusb_config_vddcx: min_vol:0 max_vol:1320000
  537. <6>[    1.510681] msm_otg msm_otg: USB in low power mode
  538. <6>[    1.516723] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_f34_init: [IC] [date, revision, version, panel] [04/10, 0xB0, 0x56, 0x03]
  539. <6>[    1.517211] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_check_status: status_code: 1
  540. <6>[    1.518157] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_f12_init: globe touch disabled(0x19)
  541. <6>[    1.519195] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_f12_init: Function 12 max x = 1079 max y = 1919
  542. <6>[    1.519775] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_f12_init: 12 num_Rx:28 num_Tx:16, node:192, threshold:30, gloved sensitivity:f9
  543. <6>[    1.519989] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_glove_mode_enables: [00]: glove disable
  544. <6>[    1.523010] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_f51_init: proximity controls:[0X51]
  545. <6>[    1.523040] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_f51_set_enables: disable
  546. <6>[    1.525634] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_query_device: Number of interrupt registers = 1 sum of intr_count = 6
  547. <6>[    1.526733] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_query_device: F34 : NUM_SOURCE[21] NUM_INT_REG[00] INT_MASK[00]
  548. <6>[    1.526733] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_query_device: F12 : NUM_SOURCE[01] NUM_INT_REG[00] INT_MASK[04]
  549. <6>[    1.526763] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_query_device: F51 : NUM_SOURCE[41] NUM_INT_REG[00] INT_MASK[20]
  550. <6>[    1.526794] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_query_device: Interrupt enable mask 0 = 0x24
  551. <6>[    1.527435] input: sec_touchscreen as /devices/i2c-3/3-0020/input/input3
  552. <6>[    1.529449] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_f54_set_control: query_base_addr: 132, control_base_addr: 10c, data_base_addr: 100, command_base_addr: 131
  553. <6>[    1.531982] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_fwu_init: ic revision is B0 type.
  554. <6>[    1.532012] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_fwu_init: [IC] [F01 product info, ID(revision)] [0x0000 0x0000, SY 01(0XB0)], PANEL : 0x03
  555. <6>[    1.533477] synaptics_rmi4_i2c 3-0020: synaptics_fw_updater: booting, user_FW
  556. <6>[    1.533508] synaptics_rmi4_i2c 3-0020: fwu_start_reflash: Requesting firmware image tsp_synaptics/synaptics_b0_5_1.fw
  557. <6>[    1.533569] synaptics_rmi4_i2c 3-0020: fwu_check_skip_reflash: [FW size. revision, version] [62976, 0xB0/0xB0(BIN/IC), 0x55/0x56(BIN/IC)]
  558. <6>[    1.533599] synaptics_rmi4_i2c 3-0020: fwu_check_skip_reflash: [Panel, mode, prog] [0x03, 0x00, 0x00]
  559. <6>[    1.533630] synaptics_rmi4_i2c 3-0020: fwu_check_skip_reflash: do not need to update fw
  560. <6>[    1.533691] set_freq_limit: 0x1 -1, min 0, max 0
  561. <6>[    1.533721] synaptics_rmi4_i2c 3-0020: fwu_start_reflash: End of reflash process
  562. <6>[    1.533752] synaptics_tsp_register_callback: [synaptics] charger callback!
  563. <6>[    1.533782] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_early_suspend
  564. <6>[    1.534240] synaptics_power_onoff: disable l17
  565. <6>[    1.534851] synaptics_power_onoff: disable l22
  566. <6>[    1.535034] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_release_all_finger: dvfs_lock free.
  567. <6>[    1.535797] lis3dh_acc accelerometer driver: init
  568. <4>[    1.535888] i2c-core: driver [lis3dh_acc] using legacy suspend method
  569. <4>[    1.535919] i2c-core: driver [lis3dh_acc] using legacy resume method
  570. <6>[    1.536956] using rtc device, pm8xxx_rtc, for alarms
  571. <6>[    1.537017] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  572. <6>[    1.537475] i2c /dev entries driver
  573. <6>[    1.538818] lirc_dev: IR Remote Control driver registered, major 237
  574. <6>[    1.538818] IR NEC protocol handler initialized
  575. <6>[    1.538848] IR RC5(x) protocol handler initialized
  576. <6>[    1.538848] IR RC6 protocol handler initialized
  577. <6>[    1.538848] IR JVC protocol handler initialized
  578. <6>[    1.538879] IR Sony protocol handler initialized
  579. <6>[    1.538879] IR RC5 (streamzap) protocol handler initialized
  580. <6>[    1.538879] IR SANYO protocol handler initialized
  581. <6>[    1.538909] IR MCE Keyboard/mouse protocol handler initialized
  582. <6>[    1.538909] IR LIRC bridge handler initialized
  583. <6>[    1.539978] usbcore: registered new interface driver uvcvideo
  584. <6>[    1.540008] USB Video Class driver (1.1.1)
  585. <7>[    1.541473] [JC] jc_i2c_probe:E
  586. <3>[    1.541473] [jc_spi_init:336] Entered
  587. <3>[    1.544219] [jc_spi_probe:301] Entered
  588. <3>[    1.548065] [jc_spi_probe:311] jc_spi successfully probed
  589. <3>[    1.553436] jc_config_isp_irq~~~~~~~~~~
  590. <3>[    1.557281] msm_eeprom_probe probe_fail
  591. <7>[    1.560943] [JC] jc_enum_fmt:Index is 0
  592. <7>[    1.560974] [JC] jc_enum_fmt:Index is 1
  593. <7>[    1.561004] [JC] jc_enum_fmt:Index is 0
  594. <6>[    1.561309] msm_server_update_sensor_info mctl_node_name[0] = video1
  595. <7>[    1.561431] [JC] jc_init_vreg_port:E
  596. <7>[    1.565673] [JC] jc_i2c_probe:X
  597. <3>[    1.565887] msm_sensor_i2c_probe s5k6b2yx probe succeeded
  598. <3>[    1.570465] msm_eeprom_probe probe_fail
  599. <6>[    1.574493] msm_server_update_sensor_info mctl_node_name[1] = video3
  600. <6>[    1.575744] msm_cam_server_request_irq IRQ Router hw is not present.
  601. <6>[    1.575927] msm_cam_server_request_irq IRQ Router hw is not present.
  602. <6>[    1.577270] msm_cam_server_request_irq IRQ Router hw is not present.
  603. <7>[    1.596099] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
  604. <7>[    1.596221] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
  605. <6>[    1.604034] pm8xxx_tm_probe: OK
  606. <6>[    1.604858] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  607. <6>[    1.605041] Bluetooth: HCI UART driver ver 2.2
  608. <6>[    1.605072] Bluetooth: HCI H4 protocol initialized
  609. <6>[    1.605072] Bluetooth: BlueSleep Mode Driver Ver 1.1
  610. <6>[    1.606140] cpuidle: using governor ladder
  611. <6>[    1.606140] cpuidle: using governor menu
  612. <6>[    1.607208] mmc0: SDCC Version: 0x06000018
  613. <6>[    1.612762] mmc0: bam physical base=0x12402000
  614. <6>[    1.612762] mmc0: bam virtual base=0xe31fc000
  615. <6>[    1.612792] sps:BAM 0x12402000 is registered.
  616. <6>[    1.612823] mmc0: BAM device registered. bam_handle=0xc1f69e00
  617. <6>[    1.612945] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
  618. <6>[    1.613189] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
  619. <6>[    1.613220] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
  620. <3>[    1.613281] mmc0: No card detect facilities available
  621. <6>[    1.621887] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
  622. <6>[    1.621917] mmc0: Controller capabilities: 0x0000079a
  623. <6>[    1.621917] mmc0: 8 bit data mode enabled
  624. <6>[    1.621948] mmc0: 4 bit data mode disabled
  625. <6>[    1.621948] mmc0: polling status mode disabled
  626. <6>[    1.621948] mmc0: MMC clock 400000 -> 192000000 Hz, PCLK 0 Hz
  627. <6>[    1.621978] mmc0: Slot eject status = 0
  628. <6>[    1.621978] mmc0: Power save feature enable = 1
  629. <6>[    1.621978] mmc0: SPS-BAM data transfer mode available
  630. <6>[    1.622589] mmc1: SDCC Version: 0x06000018
  631. <6>[    1.631011] mmc1: bam physical base=0x12182000
  632. <6>[    1.631042] mmc1: bam virtual base=0xe3338000
  633. <6>[    1.631042] sps:BAM 0x12182000 is registered.
  634. <6>[    1.631072] mmc1: BAM device registered. bam_handle=0xc1f72400
  635. <6>[    1.631195] sps:BAM 0x12182000 enabled: ver:0x5, number of pipes:6
  636. <6>[    1.631408] mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 128
  637. <6>[    1.631469] mmc1: Qualcomm MSM SDCC-DML at 0x0000000012180800
  638. <4>[    1.631530] brcm_wifi_status:267 status 0
  639. <6>[    1.631530] brcm_wifi_status_register: callback is c057d470, devid is ddaed400
  640. <6>[    1.635223] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,0 dma -1 dmacrcri -1
  641. <6>[    1.635223] mmc1: Controller capabilities: 0x0000079a
  642. <6>[    1.635253] mmc1: 8 bit data mode disabled
  643. <6>[    1.635253] mmc1: 4 bit data mode enabled
  644. <6>[    1.635253] mmc1: polling status mode disabled
  645. <6>[    1.635284] mmc1: MMC clock 400000 -> 192000000 Hz, PCLK 0 Hz
  646. <6>[    1.635284] mmc1: Slot eject status = 1
  647. <6>[    1.635314] mmc1: Power save feature enable = 1
  648. <6>[    1.635314] mmc1: SPS-BAM data transfer mode available
  649. <6>[    1.636016] mmc2: SDCC Version: 0x06000018
  650. <6>[    1.642974] mmc2: bam physical base=0x12142000
  651. <6>[    1.643005] mmc2: bam virtual base=0xe3398000
  652. <6>[    1.643005] sps:BAM 0x12142000 is registered.
  653. <6>[    1.643035] mmc2: BAM device registered. bam_handle=0xc1f72e00
  654. <6>[    1.643157] sps:BAM 0x12142000 enabled: ver:0x5, number of pipes:6
  655. <6>[    1.643402] mmc2: Qualcomm MSM SDCC-BAM at 0x0000000012142000 irq 129
  656. <6>[    1.643432] mmc2: Qualcomm MSM SDCC-DML at 0x0000000012140800
  657. <7>[    1.643829] msmsdcc_probe : Change sysfs Card Detect
  658. <6>[    1.647644] mmc2: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,664 dma -1 dmacrcri -1
  659. <6>[    1.647644] mmc2: Controller capabilities: 0x0000079a
  660. <6>[    1.647674] mmc2: 8 bit data mode disabled
  661. <6>[    1.647674] mmc2: 4 bit data mode enabled
  662. <6>[    1.647674] mmc2: polling status mode disabled
  663. <6>[    1.647705] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  664. <6>[    1.647705] mmc2: Slot eject status = 0
  665. <6>[    1.647705] mmc2: Power save feature enable = 1
  666. <6>[    1.647735] mmc2: SPS-BAM data transfer mode available
  667. <7>[    1.675354] Registered led device: led_r
  668. <7>[    1.701873] Registered led device: led_g
  669. <7>[    1.708282] Registered led device: led_b
  670. <7>[    1.710052] Registered led device: leds-sec1
  671. <7>[    1.712646] [LED] max77693_led_get_en_value: led mode: 0x1, on: 0
  672. <7>[    1.715698] Registered led device: torch-sec1
  673. <7>[    1.718322] [LED] max77693_led_get_en_value: led mode: 0x2, on: 0
  674. <6>[    1.727447] usbcore: registered new interface driver usbhid
  675. <6>[    1.727478] usbhid: USB HID core driver
  676. <6>[    1.727508] zram: num_devices not specified. Using default: 1
  677. <6>[    1.727539] zram: Creating 1 devices ...
  678. <6>[    1.730041] ashmem: initialized
  679. <6>[    1.730194] logger: created 1024K log 'log_main'
  680. <6>[    1.730377] logger: created 512K log 'log_events'
  681. <6>[    1.730560] logger: created 2048K log 'log_radio'
  682. <6>[    1.730712] logger: created 512K log 'log_system'
  683. <6>[    1.730743] sec_getlog_supply_loggerinfo: 0xc10d1ecc 0xc11d1ecc 0xc13d1ecc 0xc1451ecc
  684. <6>[    1.736145] usb 1-1: new high-speed USB device number 2 using msm_hsic_host
  685. <6>[    1.739654] sec-fuelgauge 11-0036: 0x02(0xc4), 0x03(0x10), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x76), 0x0d(0x1c),
  686. <6>[    1.744110] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x21), 0x17(0xb0), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  687. <6>[    1.745269] sec-fuelgauge 11-0036: MAX17048 Fuel-Gauge Ver 0x0012
  688. <3>[    1.745544] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
  689. <3>[    1.753448] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
  690. <4>[    1.764495] i2c-core: driver [sec-fuelgauge] using legacy suspend method
  691. <4>[    1.764526] i2c-core: driver [sec-fuelgauge] using legacy resume method
  692. <6>[    1.764617] func:max77693_charger_init
  693. <6>[    1.765106] max77693_charger_probe: MAX77693 Charger driver probe
  694. <6>[    1.768371] max77693_dump_reg
  695. <6>[    1.769042] max77693: c: 0xb0(0x1d)
  696. <6>[    1.769744] max77693: c: 0xb1(0xff)
  697. <6>[    1.770416] max77693: c: 0xb2(0x1d)
  698. <6>[    1.771087] max77693: c: 0xb3(0x00)
  699. <6>[    1.771759] max77693: c: 0xb4(0x38)
  700. <6>[    1.772430] max77693: c: 0xb5(0x00)
  701. <6>[    1.773101] max77693: c: 0xb6(0xb6)
  702. <6>[    1.773773] max77693: c: 0xb7(0x05)
  703. <6>[    1.774444] max77693: c: 0xb8(0x30)
  704. <6>[    1.775115] max77693: c: 0xb9(0x80)
  705. <6>[    1.775360] mmc0: BKOPS_EN bit is not set
  706. <6>[    1.775787] max77693: c: 0xba(0x20)
  707. <6>[    1.776519] max77693: c: 0xbb(0xdd)
  708. <6>[    1.777221] max77693: c: 0xbc(0xd6)
  709. <6>[    1.777893] max77693: c: 0xbd(0x0c)
  710. <6>[    1.778564] max77693: c: 0xbe(0x40)
  711. <6>[    1.779235] max77693: c: 0xbf(0xbf)
  712. <6>[    1.779907] max77693: c: 0xc0(0x17)
  713. <6>[    1.780578] max77693: c: 0xc1(0x19)
  714. <6>[    1.781250] max77693: c: 0xc2(0x00)
  715. <6>[    1.781921] max77693: c: 0xc3(0x67)
  716. <6>[    1.782592] max77693: c: 0xc4(0xc4)
  717. <6>[    1.783264] max77693: c: 0xc5(0xc5)
  718. <6>[    1.784393] max77693_get_charger_state: CHG_DTLS : 0x 8
  719. <6>[    1.785766] max77693_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
  720. <7>[    1.785827] usb 1-1: default language 0x0409
  721. <6>[    1.786499] max77693_get_charger_state: CHG_DTLS : 0x 8
  722. <6>[    1.787872] max77693_get_input_current: CHG_CNFG_09(0x17)
  723. <3>[    1.787902] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
  724. <7>[    1.793823] usb 1-1: udev 2, busnum 1, minor = 1
  725. <6>[    1.793823] usb 1-1: New USB device found, idVendor=05c6, idProduct=9008
  726. <6>[    1.793853] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  727. <6>[    1.793853] usb 1-1: Product: QHSUSB__BULK
  728. <6>[    1.793853] usb 1-1: Manufacturer: Qualcomm CDMA Technologies MSM
  729. <7>[    1.794128] usb 1-1: usb_probe_device
  730. <7>[    1.794128] usb 1-1: configuration #1 chosen from 1 choice
  731. <6>[    1.797332] max77693_get_charger_state: CHG_DTLS : 0x 8
  732. <7>[    1.797821] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
  733. <7>[    1.798065] ks_bridge 1-1:1.0: usb_probe_interface
  734. <7>[    1.798095] ks_bridge 1-1:1.0: usb_probe_interface - got id
  735. <6>[    1.798309] ksb_usb_probe: usb dev connected
  736. <6>[    1.798675] max77693_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
  737. <6>[    1.799377] max77693_get_charger_state: CHG_DTLS : 0x 8
  738. <6>[    1.800720] max77693_get_input_current: CHG_CNFG_09(0x17)
  739. <3>[    1.800750] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
  740. <3>[    1.803588] mmc0: msmsdcc_execute_tuning: found good phase = 0
  741. <3>[    1.803680] mmc0: msmsdcc_execute_tuning: found good phase = 1
  742. <3>[    1.803771] mmc0: msmsdcc_execute_tuning: found good phase = 2
  743. <3>[    1.803863] mmc0: msmsdcc_execute_tuning: found good phase = 3
  744. <3>[    1.803955] mmc0: msmsdcc_execute_tuning: found good phase = 4
  745. <3>[    1.804046] mmc0: msmsdcc_execute_tuning: found good phase = 5
  746. <3>[    1.804138] mmc0: msmsdcc_execute_tuning: found good phase = 6
  747. <3>[    1.804229] mmc0: msmsdcc_execute_tuning: found good phase = 7
  748. <3>[    1.804321] mmc0: msmsdcc_execute_tuning: found good phase = 8
  749. <3>[    1.804412] mmc0: msmsdcc_execute_tuning: found good phase = 9
  750. <3>[    1.804504] mmc0: msmsdcc_execute_tuning: found good phase = 10
  751. <3>[    1.804595] mmc0: msmsdcc_execute_tuning: found good phase = 11
  752. <3>[    1.804687] mmc0: msmsdcc_execute_tuning: found good phase = 12
  753. <6>[    1.804901] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
  754. <6>[    1.805297] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
  755. <3>[    1.805572] mmc0: msmsdcc_execute_tuning: found good phase = 15
  756. <3>[    1.805603] mmc0: msmsdcc_execute_tuning: finally setting the tuning phase to 8
  757. <6>[    1.897766] mmc0: new HS200 MMC card at address 0001
  758. <6>[    1.898437] mmcblk0: mmc0:0001 AFEABB 14.6 GiB
  759. <4>[    1.898834] ------------[ cut here ]------------
  760. <4>[    1.898864] WARNING: at /home/shabbypenguin/Android/CM/kernel/samsung/jf/block/blk.h:211 get_task_io_context+0x70/0xac()
  761. <4>[    1.898864] Modules linked in:
  762. <4>[    1.898925] [<c0013944>] (unwind_backtrace+0x0/0x11c) from [<c0072a74>] (warn_slowpath_common+0x4c/0x64)
  763. <4>[    1.898956] [<c0072a74>] (warn_slowpath_common+0x4c/0x64) from [<c0072aa4>] (warn_slowpath_null+0x18/0x1c)
  764. <4>[    1.898956] [<c0072aa4>] (warn_slowpath_null+0x18/0x1c) from [<c02b3678>] (get_task_io_context+0x70/0xac)
  765. <4>[    1.899017] [<c02b3678>] (get_task_io_context+0x70/0xac) from [<c057c3d4>] (mmc_request+0x5c/0x100)
  766. <4>[    1.899047] [<c057c3d4>] (mmc_request+0x5c/0x100) from [<c02ab4b8>] (__blk_run_queue+0x18/0x1c)
  767. <4>[    1.899078] [<c02ab4b8>] (__blk_run_queue+0x18/0x1c) from [<c02b1578>] (blk_queue_bio+0x3a0/0x3b4)
  768. <4>[    1.899078] [<c02b1578>] (blk_queue_bio+0x3a0/0x3b4) from [<c02b00c4>] (generic_make_request+0x88/0xbc)
  769. <4>[    1.899108] [<c02b00c4>] (generic_make_request+0x88/0xbc) from [<c02b01f4>] (submit_bio+0xfc/0x140)
  770. <4>[    1.899169] [<c02b01f4>] (submit_bio+0xfc/0x140) from [<c015bc88>] (submit_bh+0x128/0x148)
  771. <4>[    1.899169] [<c015bc88>] (submit_bh+0x128/0x148) from [<c015d208>] (block_read_full_page+0x2e0/0x300)
  772. <4>[    1.899230] [<c015d208>] (block_read_full_page+0x2e0/0x300) from [<c00f42cc>] (do_read_cache_page+0x84/0x14c)
  773. <4>[    1.899230] [<c00f42cc>] (do_read_cache_page+0x84/0x14c) from [<c00f43cc>] (read_cache_page_async+0x14/0x18)
  774. <4>[    1.899261] [<c00f43cc>] (read_cache_page_async+0x14/0x18) from [<c00f43d8>] (read_cache_page+0x8/0x10)
  775. <4>[    1.899291] [<c00f43d8>] (read_cache_page+0x8/0x10) from [<c02b9298>] (read_dev_sector+0x2c/0x64)
  776. <4>[    1.899322] [<c02b9298>] (read_dev_sector+0x2c/0x64) from [<c02babf4>] (read_lba+0xbc/0x11c)
  777. <4>[    1.899353] [<c02babf4>] (read_lba+0xbc/0x11c) from [<c02bb260>] (efi_partition+0xbc/0xd14)
  778. <4>[    1.899383] [<c02bb260>] (efi_partition+0xbc/0xd14) from [<c02ba088>] (check_partition+0xdc/0x1b8)
  779. <4>[    1.899383] [<c02ba088>] (check_partition+0xdc/0x1b8) from [<c02b9d48>] (rescan_partitions+0x9c/0x28c)
  780. <4>[    1.899414] [<c02b9d48>] (rescan_partitions+0x9c/0x28c) from [<c0162e60>] (__blkdev_get+0x15c/0x36c)
  781. <4>[    1.899444] [<c0162e60>] (__blkdev_get+0x15c/0x36c) from [<c016321c>] (blkdev_get+0x1ac/0x2c0)
  782. <4>[    1.899475] [<c016321c>] (blkdev_get+0x1ac/0x2c0) from [<c02b7c14>] (add_disk+0x26c/0x3e8)
  783. <4>[    1.899505] [<c02b7c14>] (add_disk+0x26c/0x3e8) from [<c0579b94>] (mmc_add_disk+0x14/0x1ac)
  784. <4>[    1.899505] [<c0579b94>] (mmc_add_disk+0x14/0x1ac) from [<c057a8e0>] (mmc_blk_probe+0x234/0x33c)
  785. <4>[    1.899536] [<c057a8e0>] (mmc_blk_probe+0x234/0x33c) from [<c056f1fc>] (mmc_bus_probe+0x14/0x18)
  786. <4>[    1.899566] [<c056f1fc>] (mmc_bus_probe+0x14/0x18) from [<c03b10d0>] (driver_probe_device+0x144/0x358)
  787. <4>[    1.899597] [<c03b10d0>] (driver_probe_device+0x144/0x358) from [<c03af70c>] (bus_for_each_drv+0x4c/0x84)
  788. <4>[    1.899627] [<c03af70c>] (bus_for_each_drv+0x4c/0x84) from [<c03b0f10>] (device_attach+0x74/0xa0)
  789. <4>[    1.899658] [<c03b0f10>] (device_attach+0x74/0xa0) from [<c03b043c>] (bus_probe_device+0x28/0x98)
  790. <4>[    1.899688] [<c03b043c>] (bus_probe_device+0x28/0x98) from [<c03aebc4>] (device_add+0x444/0x5e4)
  791. <4>[    1.899719] [<c03aebc4>] (device_add+0x444/0x5e4) from [<c056f608>] (mmc_add_card+0x178/0x1d4)
  792. <4>[    1.899749] [<c056f608>] (mmc_add_card+0x178/0x1d4) from [<c0571e94>] (mmc_attach_mmc+0x130/0x1b0)
  793. <4>[    1.899749] [<c0571e94>] (mmc_attach_mmc+0x130/0x1b0) from [<c056ee78>] (mmc_rescan+0x26c/0x2d8)
  794. <4>[    1.899780] [<c056ee78>] (mmc_rescan+0x26c/0x2d8) from [<c008b3d0>] (process_one_work+0x2a8/0x4cc)
  795. <4>[    1.899810] [<c008b3d0>] (process_one_work+0x2a8/0x4cc) from [<c008b808>] (worker_thread+0x214/0x3b4)
  796. <4>[    1.899841] [<c008b808>] (worker_thread+0x214/0x3b4) from [<c008f700>] (kthread+0x84/0x90)
  797. <4>[    1.899871] [<c008f700>] (kthread+0x84/0x90) from [<c000ef28>] (kernel_thread_exit+0x0/0x8)
  798. <4>[    1.899871] ---[ end trace da227214a82491b8 ]---
  799. <6>[    1.905212] ssp_get_positions, position acc : 3, mag = 3
  800. <6>[    1.905242]
  801. <6>[    1.905242] #####################################################
  802. <6>[    1.905273] [SSP] change_rev = 1
  803. <6>[    1.905914] [SSP] MCU Firm Rev : Old = 13040800, New = 13040800
  804. <6>[    1.907958]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
  805. <6>[    1.912719] [SSP] MCU device ID = 85, reading ID = 85
  806. <6>[    1.912780] [SSP] Sensor Posision A : 3, G : 3, M: 3, P: 0
  807. <6>[    1.913757] input: accelerometer_sensor as /devices/virtual/input/input4
  808. <6>[    1.914031] input: gyro_sensor as /devices/virtual/input/input5
  809. <6>[    1.914276] input: pressure_sensor as /devices/virtual/input/input6
  810. <6>[    1.914550] input: gesture_sensor as /devices/virtual/input/input7
  811. <6>[    1.914794] input: light_sensor as /devices/virtual/input/input8
  812. <6>[    1.915069] input: proximity_sensor as /devices/virtual/input/input9
  813. <6>[    1.915313] input: temp_humidity_sensor as /devices/virtual/input/input10
  814. <6>[    1.915588] input: geomagnetic_sensor as /devices/virtual/input/input11
  815. <6>[    1.915924] [SSP]: requesting IRQ 651
  816. <6>[    1.918395] input: ssp_context as /devices/virtual/input/input12
  817. <6>[    1.918945] ssp_enable, enable = 1, old enable = 1
  818. <6>[    1.919006] [SSP]: ssp_probe - probe success!
  819. <6>[    1.919036] #####################################################
  820. <6>[    1.919036]
  821. <6>[    1.920379] usbcore: registered new interface driver snd-usb-audio
  822. <6>[    1.923522] es325_init(): entry
  823. <6>[    1.923828] es325_init(): slim_driver_register()
  824. <6>[    1.923950] es325_enable_ext_clk: enable=1
  825. <6>[    1.923980] es325_enable_ext_clk: Clk_Get osr_clk
  826. <6>[    1.924346] es325-codec es325-codec-gen0: es325_slim_device_up: name=es325-codec-gen0
  827. <6>[    1.924377] es325-codec es325-codec-gen0: es325_slim_device_up: laddr=3
  828. <6>[    1.924407] es325-codec es325-codec-gen0: es325_slim_device_up: priv=c14d3128
  829. <6>[    1.924438] fw_download(): called
  830. <6>[    1.924468] fw_download(): es325 gen0 LA=3
  831. <6>[    1.924499] es325_bootup(): entry
  832. <6>[    1.924591] es325_init(): exit
  833. <6>[    1.927001] msm_pcm_probe: dev name msm-voip-dsp
  834. <6>[    1.927581] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8
  835. <6>[    1.927612] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8
  836. <6>[    1.929504] msm_pcm_probe: dev name msm-pcm-dsp
  837. <6>[    1.930114] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
  838. <6>[    1.930694] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
  839. <6>[    1.932373] msm_compr_probe: dev name msm-compr-dsp
  840. <6>[    1.933502] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  841. <3>[    1.935302] msm8930_audio_init: Not the right machine type
  842. <3>[    1.940002] msm_audio_init: Not the right machine type
  843. <6>[    1.945037] msm_audio_init: Not APQ8064 in I2S mode
  844. <6>[    1.956970] tabla_codec tabla_codec: es325_remote_add_codec_controls(): entry
  845. <6>[    1.957000] tabla_codec tabla_codec: es325_remote_add_codec_controls(): codec->name = tabla_codec
  846. <6>[    1.974578] es325_bootup(): write ES325_BOOT_CMD
  847. <6>[    1.974609] es325_bootup(): msg[0] = 0x01
  848. <6>[    1.974639] es325_bootup(): msg[1] = 0x00
  849. <6>[    1.974639] es325_bootup(): msg[2] = 0x00
  850. <6>[    1.974670] es325_bootup(): msg[3] = 0x00
  851. <6>[    2.024841] es325_bootup(): read boot cmd ack
  852. <6>[    2.027404] es325_bootup(): msg[0] = 0x01
  853. <6>[    2.027435] es325_bootup(): msg[1] = 0x01
  854. <6>[    2.027465] es325_bootup(): msg[2] = 0x01
  855. <6>[    2.027465] es325_bootup(): msg[3] = 0x01
  856. <6>[    2.059692] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  857. <6>[    2.061065] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  858. <6>[    2.062408] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
  859. <6>[    2.063751] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
  860. <6>[    2.065063] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
  861. <6>[    2.066497] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
  862. <6>[    2.067718] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
  863. <6>[    2.069183] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
  864. <6>[    2.070617] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
  865. <6>[    2.072143] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
  866. <6>[    2.073669] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
  867. <6>[    2.075134] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
  868. <6>[    2.076568] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
  869. <6>[    2.077545] es325_bootup(): write firmware image
  870. <6>[    2.077575] es325_bootup(): buf_frames = 47646
  871. <6>[    2.083984] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
  872. <6>[    2.085662] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
  873. <6>[    2.088592] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
  874. <6>[    2.096038] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
  875. <6>[    2.097778] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
  876. <6>[    2.099334] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
  877. <6>[    2.100891] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
  878. <6>[    2.102447] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
  879. <6>[    2.104003] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
  880. <6>[    2.105590] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
  881. <6>[    2.109771] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
  882. <6>[    2.111450] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
  883. <6>[    2.113037] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
  884. <6>[    2.114593] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
  885. <6>[    2.116333] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
  886. <6>[    2.117492] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
  887. <6>[    2.118499] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
  888. <6>[    2.119812] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
  889. <6>[    2.121948] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
  890. <6>[    2.123962] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
  891. <6>[    2.126007] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
  892. <6>[    2.128082] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
  893. <6>[    2.130126] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
  894. <6>[    2.132171] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
  895. <6>[    2.138824] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input13
  896. <6>[    2.139373] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input14
  897. <6>[    2.147918] oprofile: using arm/armv7-krait
  898. <6>[    2.148162] GACT probability NOT on
  899. <6>[    2.148193] Mirror/redirect action on
  900. <6>[    2.148223] u32 classifier
  901. <6>[    2.148254]     Actions configured
  902. <6>[    2.148254] Netfilter messages via NETLINK v0.30.
  903. <6>[    2.148406] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  904. <6>[    2.149780] ctnetlink v0.93: registering with nfnetlink.
  905. <6>[    2.149902] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  906. <6>[    2.149902] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  907. <6>[    2.150390] xt_time: kernel timezone is -0000
  908. <6>[    2.151367] ip_tables: (C) 2000-2006 Netfilter Core Team
  909. <6>[    2.152160] arp_tables: (C) 2002 David S. Miller
  910. <6>[    2.152343] TCP: cubic registered
  911. <6>[    2.153564] NET: Registered protocol family 10
  912. <6>[    2.156005] Mobile IPv6
  913. <6>[    2.156158] ip6_tables: (C) 2000-2006 Netfilter Core Team
  914. <6>[    2.156707] IPv6 over IPv4 tunneling driver
  915. <6>[    2.157867] NET: Registered protocol family 17
  916. <6>[    2.157928] NET: Registered protocol family 15
  917. <6>[    2.157958] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  918. <5>[    2.158233] Registering the dns_resolver key type
  919. <6>[    2.161712] VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0
  920. <5>[    2.161773] Registering SWP/SWPB emulation handler
  921. <6>[    2.161804] clock_late_init: Removing enables held for handed-off clocks
  922. <6>[    2.172851] WDOG handled by TZ:dump @0xc20cf000 PA:822cf000
  923. <6>[    2.173339] MSM Watchdog Initialized
  924. <3>[    2.177490] param_sec_operation: filp_open failed. (-2)
  925. <3>[    2.181793] sec_open_param PARAM OPEN FAIL
  926. <6>[    2.185913] sec_debug_subsys_init: msm_shared_ram_phys=80000000 SMEM_ID_VENDOR2=136 size=8756
  927. <6>[    2.185943] sec_debug_subsys_init: krait(80019130) rpm(800199e8) modem(8001a25c) dsps(8001aad0)
  928. <6>[    2.186584] regulator regulator.66: func:max77693_reg_is_enabled
  929. <6>[    2.186614] regulator regulator.66: func:max77693_get_rid
  930. <6>[    2.186614] regulator regulator.66: func:max77693_get_enable_register
  931. <6>[    2.187072] regulator regulator.65: func:max77693_reg_is_enabled
  932. <6>[    2.187072] regulator regulator.65: func:max77693_get_rid
  933. <6>[    2.187072] regulator regulator.65: func:max77693_get_enable_register
  934. <6>[    2.187500] regulator regulator.64: func:max77693_reg_is_enabled
  935. <6>[    2.187500] regulator regulator.64: func:max77693_get_rid
  936. <6>[    2.187500] regulator regulator.64: func:max77693_get_enable_register
  937. <6>[    2.188354] sec_jack_probe : Registering jack driver
  938. <6>[    2.188568] sec_jack_detect_work: detect_irq(0)
  939. <7>[    2.188842] gpio_set_debounce: gpio-186 status -22
  940. <7>[    2.188934] gpio_set_debounce: gpio-188 status -22
  941. <7>[    2.189025] gpio_set_debounce: gpio-181 status -22
  942. <6>[    2.189178] input: gpio-keys as /devices/platform/gpio-keys/input/input15
  943. <7>[    2.189208] [HALL_IC] : gpio_keys_open
  944. <6>[    2.189392] [sec_debug_check_crash_key] code(0x73), value(0)
  945. <6>[    2.189453] [sec_debug_check_crash_key] code(0x72), value(0)
  946. <6>[    2.189483] [sec_debug_check_crash_key] code(0xac), value(0)
  947. <6>[    2.189636] [TouchKey] START(cypress_touchkey_probe)!
  948. <7>[    2.190673] cypress_power_on is finished.
  949. <4>[    2.196014] mmc2: host does not support reading read-only switch. assuming write-enable.
  950. <6>[    2.203948] mmc2: new high speed SDHC card at address aaaa
  951. <6>[    2.204162] mmcblk1: mmc2:aaaa SU32G 29.7 GiB
  952. <6>[    2.208007]  mmcblk1: p1
  953. <6>[    2.246154] input: sec_touchkey as /devices/platform/i2c-gpio.16/i2c-16/16-0020/input/input16
  954. <7>[    2.247894] Registered led device: button-backlight
  955. <6>[    2.247894] [Touchkey] IC FW Version: 0x1a
  956. <6>[    2.247894] [Touchkey] IC ID Version: 0x05
  957. <6>[    2.247924] cypress_touchkey 16-0020: [TouchKey] FW update does not need!
  958. <7>[    2.249938] [TouchKey] data[0]=50 data[1]=1a data[2]=4 data[3]=1
  959. <7>[    2.387451] [Touchkey] autocal Enabled
  960. <6>[    2.387512] cypress_touchkey 16-0020: [Touchkey] Register TA Callback
  961. <6>[    2.387542] [Touchkey] DONE(cypress_touchkey_probe)!
  962. <6>[    2.387634] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-27 06:02:41 UTC (2268161)
  963. <6>[    2.387786] pm8921_charger_probe: pm8921-charger driver Loading SKIP!!!
  964. <4>[    2.387817] pm8921-charger: probe of pm8921-charger failed with error -22
  965. <3>[    2.392303] sec-battery sec-battery: sec_battery_probe: Failed to Enable Wakeup Source(-6)
  966. <6>[    2.407104] tspdrv: tspdrv_probe.
  967. <7>[    2.407165] ImmVibeSPI_ForceOut_Initialize.
  968. <7>[    2.407165] haptic power_off is finished.
  969. <7>[    2.407196] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
  970. <6>[    2.407348] gpiochip_add: registered GPIOs 300 to 315 on device: ice-fpga-gpio
  971. <6>[    2.407409] barcode_emul_ice4: barcode_emul_probe probe!
  972. <3>[    2.407409] irda_device_init called!
  973. <6>[    2.410034] barcode_emul_ice4: barcode_emul_probe setting gpio config.
  974. <6>[    2.410034] barcode_gpio_config
  975. <6>[    2.410125] barcode_emul_poweron onoff : 1
  976. <3>[    2.410308] barcode_emul_ice4: probe complete barcode_emul_probe
  977. <6>[    2.412628] sec-fuelgauge 11-0036: 0x02(0xc4), 0x03(0x20), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x76), 0x0d(0x1e),
  978. <6>[    2.415740] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x21), 0x17(0xb0), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  979. <6>[    2.416198] ALSA device list:
  980. <6>[    2.416198] max77693_get_input_current: CHG_CNFG_09(0x17)
  981. <6>[    2.416229]   #0: apq8064-tabla-snd-card
  982. <6>[    2.416809] Freeing init memory: 1036K
  983. <3>[    2.419464] init: could not import file '/init.recovery.qcom.rc' from '/init.rc'
  984. <6>[    2.426086] barcode_emul_ice4: barcode_fpga_fimrware_update_start
  985. <6>[    2.434234] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(3922mV),Inow(460mA),SOC(71%),Tbat(343)
  986. <6>[    2.434265] sec-battery sec-battery: sec_bat_monitor_work: Status(Discharging), mode(None), Health(Good), Cable(1), siop_level(100)
  987. <6>[    2.434783] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x0 CABLE:19
  988. <3>[    2.577697] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
  989. <6>[    2.586791] max77693_get_charger_state: CHG_DTLS : 0x 8
  990. <6>[    2.587615] max77693_get_vbus_state: VBUS is invalid. CHGIN < CHGIN_UVLO
  991. <6>[    2.588043] max77693_get_charger_state: CHG_DTLS : 0x 8
  992. <6>[    2.588897] max77693_get_input_current: CHG_CNFG_09(0x17)
  993. <3>[    2.588897] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
  994. <7>[    2.608581] usb: enable_store enabled=0, !dev->enabled=1
  995. <6>[    2.608581] usb:: ci13xxx_pullup is_active: 0
  996. <6>[    2.608581] usb:: ci13xxx_pullup udc->udc_driver->flags:3f
  997. <6>[    2.608581] usb:: ci13xxx_pullup !udc->vbus_active:1, !udc->driver:0
  998. <7>[    2.608734] usb: functions_store buff=adb
  999. <7>[    2.608734] usb: android_enable_function name=adb
  1000. <3>[    2.608978] init: Unable to open persistent property directory /data/property errno: 2
  1001. <7>[    2.616882] usb: enable_store enabled=1, !dev->enabled=1
  1002. <7>[    2.616912] usb: enable_store f:adb
  1003. <7>[    2.616912] usb: enable_store vendor=18d1,product=d001,bcdDevice=228
  1004. <7>[    2.616912] ,Class=0,SubClass=0,Protocol=0
  1005. <7>[    2.616943] usb: enable_store next cmd : usb_add_config
  1006. <7>[    2.617126] usb: enable_store enabled=0, !dev->enabled=0
  1007. <7>[    2.617340] usb: enable_store enabled=1, !dev->enabled=1
  1008. <7>[    2.617340] usb: enable_store f:adb
  1009. <7>[    2.617370] usb: enable_store vendor=18d1,product=d001,bcdDevice=228
  1010. <7>[    2.617370] ,Class=0,SubClass=0,Protocol=0
  1011. <7>[    2.617370] usb: enable_store next cmd : usb_add_config
  1012. <6>[    2.618438] adb_open
  1013. <7>[    2.618438] usb: android_bind_enabled_functions f:adb
  1014. <6>[    2.618438] adb_bind_config
  1015. <6>[    2.618469] usb:: ci13xxx_pullup is_active: 1
  1016. <6>[    2.618469] usb:: ci13xxx_pullup udc->udc_driver->flags:3f
  1017. <6>[    2.618499] usb:: ci13xxx_pullup !udc->vbus_active:1, !udc->driver:0
  1018. <3>[    2.619689] init: untracked pid 163 exited
  1019. <6>[    2.626434] mdp_bus_scale_restore_request: ab=3080000000 ib=3080000000
  1020. <6>[    2.667114] mipi_dsi_controller_cfg: DSI status=8 failed
  1021. <6>[    2.667175] [lcd] DSI REGULATOR SET ...
  1022. <6>[    2.667266] [lcd] PANEL REGULATOR SET ...
  1023. <7>[    2.686309] [keys_no_delay] flip_cover_work : 1
  1024. <6>[    2.776275] [lcd] PANEL ON
  1025. <6>[    2.776306] [lcd] DSI ON
  1026. <6>[    2.821563] mipi_samsung_manufacture_id id0:  0x42, id1: 0x80, id2: 0x47
  1027. <6>[    2.821563] cmd_set_change : ldi_rev : I
  1028. <6>[    2.822265] read_reg : C8[33] : 00 13 01 0f 00 41 .5c 5e 5c 57 59 58 .40 44 42 43 47 4a .56 59 5a 50 56 53 .3d 4a 42 44 5b 47 .02 03 02 01 15 01 .
  1029. <6>[    2.822265] #### LSI panel!!
  1030. <6>[    2.822509] read_reg : C8[7] : 01 15 01 14 01 19 .07 34 04 00 00 00 .
  1031. <6>[    2.822875] read_reg : C8[15] : 81 7e 80 7d 7e 7d .7c 7c 7c 7f 7f 7e .80 80 80 00 00 00 .
  1032. <6>[    2.823028] read_reg : A1[4] : 0b d4 0c 8b ff ff .
  1033. <6>[    2.823028] coordinate_tunning x : 3028, y : 3211, tune_number : 5
  1034. <6>[    2.823089] gamma_cell_determine ldi_revision: 0x428047
  1035. <6>[    2.823150] generate_gray_scale end
  1036. <6>[    2.823730] [mipi_samsung_disp_on]
  1037. <6>[    3.040100] [mipi_samsung_disp_on_in_video_engine] ID : 0x428047 LDI : LDI_LSI
  1038. <3>[    3.040100] [mdnie lite] is negative Mode On = 0
  1039. <3>[    3.040100] [mdnie lite] negative off when resume, tuning again!
  1040. <3>[    3.040100] [mdnie lite] mDNIe_Set_Mode start , mode(0), background(1)
  1041. <3>[    3.040130] [mdnie lite]  = UI MODE =
  1042. <3>[    3.040130] [mdnie lite]  = STANDARD MODE =
  1043. <3>[    3.040130] [mdnie lite]  send tuning cmd!!
  1044. <3>[    3.073272] [mdnie lite] mDNIe_Set_Mode end , mode(0), background(1)
  1045. <6>[    3.376647] EXT4-fs (mmcblk0p29): recovery complete
  1046. <6>[    3.378021] EXT4-fs (mmcblk0p29): mounted filesystem with ordered data mode. Opts: (null)
  1047. <6>[    3.447052] sec-fuelgauge 11-0036: 0x02(0xc1), 0x03(0xe0), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x6a), 0x0d(0x1e),
  1048. <6>[    3.451202] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x19), 0x17(0x44), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1049. <6>[    3.451202] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1050. <6>[    3.451629] max77693_get_input_current: CHG_CNFG_09(0x17)
  1051. <6>[    3.453094] EXT4-fs (mmcblk0p29): mounted filesystem with ordered data mode. Opts: (null)
  1052. <6>[    3.461242] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(3877mV),Inow(460mA),SOC(71%),Tbat(343)
  1053. <6>[    3.461242] sec-battery sec-battery: sec_bat_monitor_work: Status(Discharging), mode(None), Health(Good), Cable(1), siop_level(100)
  1054. <6>[    3.461761] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x0 CABLE:19
  1055. <6>[    3.485107] EXT4-fs (mmcblk0p18): recovery complete
  1056. <6>[    3.486541] EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: (null)
  1057. <3>[    3.498962] printing data of superblock-bh
  1058. <3>[    3.502105] As EXT4-fs error, printing data in hex
  1059. <3>[    3.502105]  [partition info] s_id : mmcblk0p16, start block# : 225864
  1060. <3>[    3.513458]  dump block# : 1, start offset(byte) : 0, length(byte) : 1024
  1061. <3>[    3.520141] -------------------------------------------------
  1062. <3>[    3.525909] 0x0000 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1063. <3>[    3.533935] 0x0010 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1064. <3>[    3.542053] 0x0020 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1065. <3>[    3.550140] 0x0030 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1066. <3>[    3.558197] 0x0040 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1067. <3>[    3.566223] 0x0050 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1068. <3>[    3.574340] 0x0060 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1069. <3>[    3.582427] 0x0070 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1070. <3>[    3.590454] 0x0080 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1071. <3>[    3.598571] 0x0090 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1072. <3>[    3.606658] 0x00a0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1073. <3>[    3.614685] 0x00b0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1074. <3>[    3.622741] 0x00c0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1075. <3>[    3.630859] 0x00d0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1076. <3>[    3.638916] 0x00e0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1077. <3>[    3.646972] 0x00f0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1078. <3>[    3.655029] 0x0100 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1079. <3>[    3.663146] 0x0110 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1080. <3>[    3.671234] 0x0120 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1081. <3>[    3.679260] 0x0130 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1082. <3>[    3.687377] 0x0140 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1083. <3>[    3.695434] 0x0150 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1084. <3>[    3.703521] 0x0160 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1085. <3>[    3.711547] 0x0170 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1086. <3>[    3.719665] 0x0180 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1087. <6>[    3.725128] es325_bootup(): write ES325_SYNC_CMD
  1088. <6>[    3.725158] es325_bootup(): msg[0] = 0x80
  1089. <6>[    3.725158] es325_bootup(): msg[1] = 0x00
  1090. <6>[    3.725158] es325_bootup(): msg[2] = 0x00
  1091. <6>[    3.725158] es325_bootup(): msg[3] = 0x00
  1092. <3>[    3.727722] 0x0190 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1093. <3>[    3.735748] 0x01a0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1094. <3>[    3.743896] 0x01b0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1095. <3>[    3.751953] 0x01c0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1096. <3>[    3.760009] 0x01d0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1097. <3>[    3.768066] 0x01e0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1098. <6>[    3.775207] es325_bootup(): read sync cmd ack
  1099. <6>[    3.775299] es325_bootup(): msg[0] = 0x80
  1100. <6>[    3.775299] es325_bootup(): msg[1] = 0x00
  1101. <6>[    3.775299] es325_bootup(): msg[2] = 0x00
  1102. <6>[    3.775299] es325_bootup(): msg[3] = 0x00
  1103. <6>[    3.775299] es325_bootup(): firmware sync ack good=0x80000000
  1104. <6>[    3.775299] es325_bootup(): exit
  1105. <6>[    3.775329] fw_download(): bootup rc=0
  1106. <6>[    3.775329] fw_download(): would release firmware here...
  1107. <6>[    3.775329] fw_download(): registering sound soc
  1108. <6>[    3.775360] fw_download(): register_snd_soc rc=0
  1109. <6>[    3.775390] GAC:es325_fixed_config(): msg = 08003190
  1110. <3>[    3.776153] 0x01f0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1111. <3>[    3.784240] 0x0200 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1112. <3>[    3.792266] 0x0210 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1113. <6>[    3.795440] GAC:es325_fixed_config(): msg = 50003190
  1114. <3>[    3.800384] 0x0220 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1115. <3>[    3.808471] 0x0230 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1116. <6>[    3.815490] fw_download(): release module
  1117. <6>[    3.815521] fw_download(): exiting fw_download
  1118. <6>[    3.815521] es325-codec es325-codec-gen0: wrapper es325_slim_device_up(): es325-codec-gen0
  1119. <6>[    3.815521] +[ES325]=es325_sleep()=
  1120. <3>[    3.816528] 0x0240 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1121. <3>[    3.824554] 0x0250 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1122. <3>[    3.832672] 0x0260 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1123. <6>[    3.835571] -[ES325]=es325_sleep()=
  1124. <6>[    3.835601] =[ES325]=es325_wrapper_sleep_internal disable clock
  1125. <6>[    3.835601] es325_enable_ext_clk: enable=0
  1126. <6>[    3.835601] es325-codec es325-codec-gen0: wrapper es325_slim_device_up: es325 sleep default
  1127. <6>[    3.835601] es325-codec es325-codec-gen0: wrapper es325_slim_device_up: device up complete
  1128. <3>[    3.840759] 0x0270 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1129. <3>[    3.848785] 0x0280 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1130. <3>[    3.856903] 0x0290 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1131. <3>[    3.864959] 0x02a0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1132. <3>[    3.873046] 0x02b0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1133. <3>[    3.881072] 0x02c0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1134. <3>[    3.889190] 0x02d0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1135. <3>[    3.897277] 0x02e0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1136. <3>[    3.905273] 0x02f0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1137. <3>[    3.913360] 0x0300 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1138. <3>[    3.921478] 0x0310 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1139. <3>[    3.929565] 0x0320 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1140. <3>[    3.937591] 0x0330 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1141. <3>[    3.945709] 0x0340 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1142. <3>[    3.953796] 0x0350 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1143. <3>[    3.961853] 0x0360 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1144. <3>[    3.969879] 0x0370 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1145. <3>[    3.977996] 0x0380 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1146. <3>[    3.986053] 0x0390 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1147. <3>[    3.994110] 0x03a0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1148. <3>[    4.002227] 0x03b0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1149. <3>[    4.010284] 0x03c0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1150. <3>[    4.018371] 0x03d0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1151. <3>[    4.026397] 0x03e0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1152. <3>[    4.034515] 0x03f0 : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  | ................
  1153. <3>[    4.042572] ---------------------------------------------------
  1154. <3>[    4.048431] EXT4-fs (mmcblk0p16): VFS: Can't find ext4 filesystem
  1155. <6>[    4.076629] max77693-muic max77693-muic: func:max77693_muic_init_detect
  1156. <6>[    4.077056] max77693-muic max77693-muic: func:max77693_muic_detect_dev CONTROL1:0
  1157. <6>[    4.077545] max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:-1 ret:0
  1158. <6>[    4.077575] max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x0
  1159. <6>[    4.077575] max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:0 cable_type:13
  1160. <6>[    4.077575] max77693-muic max77693-muic: max77693_muic_detect_dev: DETACHED
  1161. <6>[    4.077575] max77693-muic max77693-muic: func:max77693_muic_handle_detach
  1162. <6>[    4.079711] max77693-muic max77693-muic: max77693_muic_handle_detach: CNTL2(0x3b)
  1163. <6>[    4.080139] max77693-muic:max77693_muic_clear_cddelay read CDETCTRL1=0xd, ret=0
  1164. <6>[    4.080139] max77693-muic:max77693_muic_clear_cddelay CDDelay already cleared, return
  1165. <6>[    4.080139] max77693-muic max77693-muic: max77693_muic_handle_detach: UNKNOWN
  1166. <6>[    4.080139] max77693-muic max77693-muic: func:max77693_muic_set_charging_type force_disable:0
  1167. <6>[    4.080169] max77693_muic_charger_cb: 0
  1168. <6>[    4.080169] synaptics_rmi4_i2c 3-0020: synaptics_ta_cb: ta_status : 0
  1169. <3>[    4.080169] synaptics_rmi4_i2c 3-0020: synaptics_ta_cb: device is in suspend state or reflash.
  1170. <6>[    4.087860] cypress_touchkey 16-0020: touchkey_ta_cb : 0x05
  1171. <6>[    4.087860] [Touchkey] IC id 20065
  1172. <6>[    4.087860] cypress_touchkey 16-0020: touchkey_ta_setting
  1173. <6>[    4.088958] cypress_touchkey 16-0020: TA disconnect!!!
  1174. <6>[    4.122985] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
  1175. <6>[    4.198028] cypress_touchkey 16-0020: TA Disabled
  1176. <6>[    4.198028] max77693_muic_charger_cb: SKIP cable setting
  1177. <6>[    4.198028] max77693_set_jig_state: 0
  1178. <6>[    4.606933] sec-fuelgauge 11-0036: 0x02(0xc2), 0x03(0x60), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x6a), 0x0d(0x1e),
  1179. <6>[    4.610076] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x19), 0x17(0x44), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1180. <6>[    4.610107] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1181. <6>[    4.610504] max77693_get_input_current: CHG_CNFG_09(0x17)
  1182. <6>[    4.619995] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(3887mV),Inow(460mA),SOC(71%),Tbat(343)
  1183. <6>[    4.620025] sec-battery sec-battery: sec_bat_monitor_work: Status(Discharging), mode(None), Health(Good), Cable(1), siop_level(100)
  1184. <6>[    4.620635] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x0 CABLE:0
  1185. <6>[    4.648681] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts: (null)
  1186. <6>[    4.906677] max77693_chgin_init_work
  1187. <6>[    5.046691] msm_thermal: Limiting cpu0 max frequency to 1674000
  1188. <6>[    5.046844] msm_thermal: Limiting cpu1 max frequency to 1674000
  1189. <6>[    5.046966] msm_thermal: Limiting cpu2 max frequency to 1674000
  1190. <6>[    5.047088] msm_thermal: Limiting cpu3 max frequency to 1674000
  1191. <6>[    5.296722] msm_thermal: Limiting cpu0 max frequency to 1458000
  1192. <6>[    5.296844] msm_thermal: Limiting cpu1 max frequency to 1458000
  1193. <6>[    5.296966] msm_thermal: Limiting cpu2 max frequency to 1458000
  1194. <6>[    5.297088] msm_thermal: Limiting cpu3 max frequency to 1458000
  1195. <6>[    5.546691] msm_thermal: Limiting cpu0 max frequency to 1242000
  1196. <6>[    5.546844] msm_thermal: Limiting cpu1 max frequency to 1242000
  1197. <6>[    5.546966] msm_thermal: Limiting cpu2 max frequency to 1242000
  1198. <6>[    5.547088] msm_thermal: Limiting cpu3 max frequency to 1242000
  1199. <6>[    5.796691] msm_thermal: Limiting cpu0 max frequency to 1026000
  1200. <6>[    5.796844] msm_thermal: Limiting cpu1 max frequency to 1026000
  1201. <6>[    5.796966] msm_thermal: Limiting cpu2 max frequency to 1026000
  1202. <6>[    5.797088] msm_thermal: Limiting cpu3 max frequency to 1026000
  1203. <6>[    6.046722] msm_thermal: Limiting cpu0 max frequency to 810000
  1204. <6>[    6.046875] msm_thermal: Limiting cpu1 max frequency to 810000
  1205. <6>[    6.046997] msm_thermal: Limiting cpu2 max frequency to 810000
  1206. <6>[    6.047149] msm_thermal: Limiting cpu3 max frequency to 810000
  1207. <6>[    6.296752] msm_thermal: Limiting cpu0 max frequency to 1026000
  1208. <6>[    6.296936] msm_thermal: Limiting cpu1 max frequency to 1026000
  1209. <6>[    6.297088] msm_thermal: Limiting cpu2 max frequency to 1026000
  1210. <6>[    6.297241] msm_thermal: Limiting cpu3 max frequency to 1026000
  1211. <6>[    6.546722] msm_thermal: Limiting cpu0 max frequency to 1242000
  1212. <6>[    6.550170] msm_thermal: Limiting cpu1 max frequency to 1242000
  1213. <6>[    6.550323] msm_thermal: Limiting cpu2 max frequency to 1242000
  1214. <6>[    6.550476] msm_thermal: Limiting cpu3 max frequency to 1242000
  1215. <6>[    6.554901] barcode_emul_ice4: FPGA firmware update success
  1216. <6>[    6.608459] barcode_emul_ice4: ice_gpiox_get : num = 1 , val = 0
  1217. <6>[    6.796722] msm_thermal: Limiting cpu0 max frequency to 1458000
  1218. <6>[    6.796875] msm_thermal: Limiting cpu1 max frequency to 1458000
  1219. <6>[    6.797058] msm_thermal: Limiting cpu2 max frequency to 1458000
  1220. <6>[    6.797210] msm_thermal: Limiting cpu3 max frequency to 1458000
  1221. <6>[    7.040557] sec-fuelgauge 11-0036: 0x02(0xc4), 0x03(0xc0), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x6a), 0x0d(0x1e),
  1222. <6>[    7.043731] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x19), 0x17(0x44), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1223. <6>[    7.043731] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1224. <6>[    7.044189] max77693_get_input_current: CHG_CNFG_09(0x17)
  1225. <6>[    7.046691] msm_thermal: Limiting cpu0 max frequency to 1674000
  1226. <6>[    7.046936] msm_thermal: Limiting cpu1 max frequency to 1674000
  1227. <6>[    7.047088] msm_thermal: Limiting cpu2 max frequency to 1674000
  1228. <6>[    7.047271] msm_thermal: Limiting cpu3 max frequency to 1674000
  1229. <6>[    7.053649] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(3935mV),Inow(460mA),SOC(71%),Tbat(344)
  1230. <6>[    7.053680] sec-battery sec-battery: sec_bat_monitor_work: Status(Discharging), mode(None), Health(Good), Cable(1), siop_level(100)
  1231. <6>[    7.054290] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x0 CABLE:0
  1232. <6>[    7.296691] msm_thermal: Max frequency reset for cpu0
  1233. <6>[    7.296905] msm_thermal: Max frequency reset for cpu1
  1234. <6>[    7.297119] msm_thermal: Max frequency reset for cpu2
  1235. <6>[    7.297302] msm_thermal: Max frequency reset for cpu3
  1236. <6>[    7.536712] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_late_resume
  1237. <6>[    7.537231] synaptics_power_onoff: enable l17
  1238. <6>[    7.537597] synaptics_power_onoff: enable l22
  1239. <6>[    7.646850] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_glove_mode_enables: [00]: glove disable
  1240. <6>[    7.646972] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_reinit_device: proximity controls:[0X51]
  1241. <6>[    7.756713] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_f51_set_enables: disable
  1242. <6>[    7.756958] synaptics_rmi4_i2c 3-0020: synaptics_rmi4_reinit_device: Interrupt enable mask register[0] = 0x24
  1243. <6>[    7.777282] touch_tout1_on
  1244. <6>[    8.654510] EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: (null)
  1245. <6>[    8.907623] brightness_control brightness_level : 0, candela : 300, auto : 0
  1246. <6>[    8.924285] mipi_samsung_disp_backlight 255
  1247. <6>[   10.452819] max77693_irq_thread: interrupt source(0x01)
  1248. <6>[   10.453247] max77693_irq_thread: charger interrupt(0x40)
  1249. <6>[   10.477996] max77693_irq_thread: interrupt source(0x08)
  1250. <6>[   10.478576] max77693_irq_thread: muic interrupt(0x00, 0x12, 0x00)
  1251. <6>[   10.478576] max77693-muic max77693-muic: max77693_muic_irq: irq:879
  1252. <6>[   10.478973] max77693-muic max77693-muic: func:max77693_muic_detect_dev CONTROL1:3f
  1253. <6>[   10.479492] max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:879 ret:0
  1254. <6>[   10.479492] max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x48
  1255. <6>[   10.479492] max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:0 cable_type:0
  1256. <6>[   10.479492] max77693-muic max77693-muic: max77693_muic_detect_dev: DETACHED
  1257. <6>[   10.479522] max77693-muic max77693-muic: func:max77693_muic_handle_detach
  1258. <6>[   10.481628] max77693-muic max77693-muic: max77693_muic_handle_detach: CNTL2(0x3b)
  1259. <6>[   10.482055] max77693-muic:max77693_muic_clear_cddelay read CDETCTRL1=0xd, ret=0
  1260. <6>[   10.482055] max77693-muic:max77693_muic_clear_cddelay CDDelay already cleared, return
  1261. <6>[   10.482055] max77693-muic max77693-muic: max77693_muic_handle_detach: duplicated(NONE)
  1262. <6>[   11.076751] max77693-muic max77693-muic: func:max77693_muic_usb_detect info->muic_data->sw_path:0
  1263. <6>[   11.319091] max77693_irq_thread: interrupt source(0x08)
  1264. <6>[   11.319671] max77693_irq_thread: muic interrupt(0x00, 0x03, 0x00)
  1265. <6>[   11.319702] max77693-muic max77693-muic: max77693_muic_irq: irq:875
  1266. <6>[   11.320098] max77693-muic max77693-muic: func:max77693_muic_detect_dev CONTROL1:9
  1267. <6>[   11.320587] max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:875 ret:0
  1268. <6>[   11.320587] max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x41
  1269. <6>[   11.320617] max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:1 cable_type:0
  1270. <6>[   11.320617] max77693-muic max77693-muic: max77693_muic_detect_dev: ATTACHED
  1271. <6>[   11.320617] max77693-muic max77693-muic: func:max77693_muic_handle_attach st1:3f st2:41 cable_type:0
  1272. <6>[   11.320617] max77693-muic max77693-muic: func:max77693_muic_attach_usb_type adc:1f cable_type:0
  1273. <6>[   11.320648] max77693-muic max77693-muic: max77693_muic_attach_usb_type:USB
  1274. <6>[   11.320648] max77693-muic max77693-muic: func:max77693_muic_set_charging_type force_disable:0
  1275. <6>[   11.320648] max77693_muic_charger_cb: 1
  1276. <6>[   11.320678] synaptics_rmi4_i2c 3-0020: synaptics_ta_cb: ta_status : 1
  1277. <6>[   11.321075] synaptics_rmi4_i2c 3-0020: synaptics_charger_conn: device_control : 20, ta_status : 1
  1278. <6>[   11.321075] cypress_touchkey 16-0020: touchkey_ta_cb : 0x05
  1279. <6>[   11.321075] [Touchkey] IC id 20065
  1280. <6>[   11.321105] cypress_touchkey 16-0020: touchkey_ta_setting
  1281. <6>[   11.322204] cypress_touchkey 16-0020: TA connect!!!
  1282. <6>[   11.428070] cypress_touchkey 16-0020: TA Enabled
  1283. <6>[   11.428894] sec_bat_check_cable_result_callback set ldo on
  1284. <6>[   11.429473] max77693-muic max77693-muic: func:max77693_muic_set_usb_path path:0
  1285. <6>[   11.429473] MUIC safeout path=0
  1286. <6>[   11.429504] regulator regulator.64: func:max77693_reg_is_enabled
  1287. <6>[   11.429504] regulator regulator.64: func:max77693_get_rid
  1288. <6>[   11.429504] regulator regulator.64: func:max77693_get_enable_register
  1289. <6>[   11.429931] regulator regulator.65: func:max77693_reg_is_enabled
  1290. <6>[   11.429931] regulator regulator.65: func:max77693_get_rid
  1291. <6>[   11.429962] regulator regulator.65: func:max77693_get_enable_register
  1292. <6>[   11.430358] max77693-muic max77693-muic: max77693_muic_set_usb_path: AP_USB_MODE
  1293. <6>[   11.430358] max77693-muic max77693-muic: max77693_muic_set_usb_path: Set manual path
  1294. <6>[   11.432189] max77693-muic max77693-muic: max77693_muic_set_usb_path: CNTL1(0x09)
  1295. <6>[   11.432586] max77693-muic max77693-muic: max77693_muic_set_usb_path: CNTL2(0x3e)
  1296. <6>[   11.432586] MUIC usb_cb:1
  1297. <6>[   11.432617] msm_otg msm_otg: MUIC: BSV set
  1298. <7>[   11.432647] msm_otg msm_otg: OTG runtime resume
  1299. <6>[   11.434906] max77693_set_charge_current: reg_data(0x8d), charge(460)
  1300. <6>[   11.440856] max77693_set_topoff_current: reg_data(0x24), topoff(200)
  1301. <6>[   11.447052] reg (HPM)
  1302. <6>[   11.447082] msm_hsusb_config_vddcx: min_vol:1045000 max_vol:1320000
  1303. <6>[   11.447082] msm_otg msm_otg: USB exited from low power mode
  1304. <7>[   11.447113] b_idle work
  1305. <7>[   11.447113] b_sess_vld
  1306. <6>[   11.447113] msm_otg msm_otg: gadget on
  1307. <6>[   11.449615] usb:: ci13xxx_vbus_session,3162
  1308. <6>[   11.449615] usb:: ci13xxx_vbus_session gadget_ready:1, is_active:1
  1309. <6>[   11.449645] usb:: hw_device_reset
  1310. <6>[   11.449645] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
  1311. <6>[   11.449676] usb:: ci13xxx_vbus_session softconnect: 1
  1312. <6>[   11.449676] usb:: hw_device_state dma: 8200d000
  1313. <6>[   11.449676] usb:: hw_device_state hw_read(CAP_ENDPTLISTADDR, ~0): 8200d000
  1314. <6>[   11.449676] usb:: hw_device_state hw_read(CAP_USBINTR, ~0): 147
  1315. <6>[   11.449707] usb:: hw_device_state hw_read(CAP_USBCMD, USBCMD_RS): 1
  1316. <6>[   11.452880] sec-fuelgauge 11-0036: 0x02(0xc7), 0x03(0x00), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x6a), 0x0d(0x1e),
  1317. <6>[   11.455749] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x19), 0x17(0x44), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1318. <6>[   11.455749] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1319. <6>[   11.456115] max77693_get_input_current: CHG_CNFG_09(0x17)
  1320. <6>[   11.465515] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(3980mV),Inow(460mA),SOC(71%),Tbat(345)
  1321. <6>[   11.466522] max77693_get_charger_state: CHG_DTLS : 0x 1
  1322. <6>[   11.466522] sec-battery sec-battery: sec_bat_time_management: Charging Time : 0 secs
  1323. <6>[   11.466552] sec-battery sec-battery: sec_bat_temperature: HT(500), HR(430), LT(-30), LR(0)
  1324. <6>[   11.466552] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
  1325. <6>[   11.466552] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1326. <6>[   11.467132] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1327. <6>[   11.588378] usb:: isr_reset_handler udc: c1e1e000
  1328. <7>[   11.588378] usb: composite_disconnect
  1329. <7>[   11.588409] usb: android_disconnect cable state (1)
  1330. <7>[   11.588439] usb: android_work config=  (null),connected=0,sw_connected=0
  1331. <6>[   11.588470] android_work: android_work: did not send uevent (0 0   (null))
  1332. <7>[   11.590667] portsc = 88000a05
  1333. <6>[   11.657379] max77693_chgin_isr_work: irq(870), chgin(0x3), prev 0x3
  1334. <7>[   11.773864] usb: GET_DES
  1335. <7>[   11.773925] usb: android_work config=  (null),connected=1,sw_connected=0
  1336. <6>[   11.774017] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1337. <6>[   11.777557] usb:: isr_reset_handler udc: c1e1e000
  1338. <7>[   11.777587] usb: composite_disconnect
  1339. <7>[   11.777587] usb: android_disconnect cable state (1)
  1340. <7>[   11.777618] usb: android_work config=  (null),connected=0,sw_connected=1
  1341. <6>[   11.777679] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  1342. <7>[   11.779846] portsc = 88000a05
  1343. <6>[   11.941406] [SSP]: MSG From MCU - Init
  1344. <6>[   11.941406] Gyro Temp Init
  1345. <6>[   11.941406] AD 6 1 0 1
  1346. <7>[   12.023345] usb: GET_DES
  1347. <7>[   12.023376] usb: android_work config=  (null),connected=1,sw_connected=0
  1348. <6>[   12.023437] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1349. <7>[   12.023590] usb: set_config_number single config
  1350. <7>[   12.023590] usb: set_interface_count next_interface_id=1
  1351. <6>[   12.036773] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1352. <7>[   16.456695] msm_ta_detect_work: ta detection work
  1353. <6>[   16.456695] msm_ta_detect_work: USB exit ta detection - frindex
  1354. <7>[   17.944519] usb: GET_DES
  1355. <7>[   17.944702] usb: set_config_number single config
  1356. <7>[   17.944732] usb: set_interface_count next_interface_id=1
  1357. <7>[   17.945007] usb: set_config_number single config
  1358. <7>[   17.945007] usb: set_interface_count next_interface_id=1
  1359. <6>[   17.945556] android_usb gadget: high-speed config #1: android_usb
  1360. <7>[   17.945587] usb: SET_CON
  1361. <7>[   17.945648] usb: android_work config=c21ba980,connected=1,sw_connected=1
  1362. <6>[   17.996734] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  1363. <6>[   21.485382] sec-fuelgauge 11-0036: 0x02(0xc7), 0x03(0xa0), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1364. <6>[   21.488250] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x19), 0x17(0x44), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1365. <6>[   21.488250] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1366. <6>[   21.488616] max77693_get_input_current: CHG_CNFG_09(0x17)
  1367. <6>[   21.498535] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(3992mV),Inow(460mA),SOC(71%),Tbat(344)
  1368. <6>[   21.499542] max77693_get_charger_state: CHG_DTLS : 0x 1
  1369. <6>[   21.499542] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1370. <6>[   21.500122] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1371. <6>[   23.036743] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1372. <6>[   23.116699] max77693-muic max77693-muic: func:max77693_muic_dock_usb_detect info->muic_data->sw_path:0
  1373. <6>[   26.076690] max77693-muic max77693-muic: func:max77693_muic_mhl_detect cable_type:1
  1374. <6>[   31.555969] sec-fuelgauge 11-0036: 0x02(0xc7), 0x03(0xa0), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1375. <6>[   31.558868] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x19), 0x17(0x44), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1376. <6>[   31.558868] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1377. <6>[   31.559204] max77693_get_input_current: CHG_CNFG_09(0x17)
  1378. <6>[   31.569091] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(3992mV),Inow(460mA),SOC(71%),Tbat(344)
  1379. <6>[   31.570129] max77693_get_charger_state: CHG_DTLS : 0x 1
  1380. <6>[   31.570129] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1381. <6>[   31.570648] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1382. <6>[   34.036712] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1383. <6>[   41.805969] sec-fuelgauge 11-0036: 0x02(0xc7), 0x03(0xa0), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1384. <6>[   41.808868] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x19), 0x17(0x44), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1385. <6>[   41.808868] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1386. <6>[   41.809234] max77693_get_input_current: CHG_CNFG_09(0x17)
  1387. <6>[   41.818023] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(3992mV),Inow(460mA),SOC(71%),Tbat(343)
  1388. <6>[   41.819061] max77693_get_charger_state: CHG_DTLS : 0x 1
  1389. <6>[   41.819061] sec-battery sec-battery: sec_bat_time_management: Charging Time : 30 secs
  1390. <6>[   41.819061] sec-battery sec-battery: sec_bat_temperature: HT(500), HR(430), LT(-30), LR(0)
  1391. <6>[   41.819061] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
  1392. <6>[   41.819091] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1393. <6>[   41.819580] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1394. <6>[   45.036743] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1395. <6>[   53.238616] sec-fuelgauge 11-0036: 0x02(0xc7), 0x03(0xc0), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1396. <6>[   53.241485] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x12), 0x17(0xf3), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1397. <6>[   53.241485] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1398. <6>[   53.241851] max77693_get_input_current: CHG_CNFG_09(0x17)
  1399. <6>[   53.250640] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(3995mV),Inow(460mA),SOC(71%),Tbat(342)
  1400. <6>[   53.251647] max77693_get_charger_state: CHG_DTLS : 0x 1
  1401. <6>[   53.251678] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1402. <6>[   53.252166] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1403. <6>[   56.036743] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1404. <6>[   59.733154] brightness_control brightness_level : 300, candela : 10, auto : 0
  1405. <6>[   59.755065] mipi_samsung_disp_backlight 5
  1406. <6>[   61.755279] brightness_control brightness_level : 10, candela : 10, auto : 0
  1407. <6>[   61.782897] mipi_samsung_disp_backlight 0
  1408. <6>[   61.986816] [lcd] mipi_samsung_disp_off
  1409. <6>[   61.991882] [lcd] PANEL OFF
  1410. <6>[   61.991912] [lcd] DSI OFF
  1411. <3>[   61.992706] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  1412. <6>[   64.671173] sec-fuelgauge 11-0036: 0x02(0xc8), 0x03(0x90), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1413. <6>[   64.674041] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x12), 0x17(0xf3), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1414. <6>[   64.674041] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1415. <6>[   64.674407] max77693_get_input_current: CHG_CNFG_09(0x17)
  1416. <6>[   64.683227] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4011mV),Inow(460mA),SOC(71%),Tbat(341)
  1417. <6>[   64.684265] max77693_get_charger_state: CHG_DTLS : 0x 1
  1418. <6>[   64.684265] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1419. <6>[   64.684783] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1420. <6>[   67.036743] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1421. <6>[   76.103729] sec-fuelgauge 11-0036: 0x02(0xc8), 0x03(0xe0), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1422. <6>[   76.106597] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x12), 0x17(0xf3), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1423. <6>[   76.106628] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1424. <6>[   76.106994] max77693_get_input_current: CHG_CNFG_09(0x17)
  1425. <6>[   76.115783] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4017mV),Inow(460mA),SOC(71%),Tbat(340)
  1426. <6>[   76.116821] max77693_get_charger_state: CHG_DTLS : 0x 1
  1427. <6>[   76.116821] sec-battery sec-battery: sec_bat_time_management: Charging Time : 65 secs
  1428. <6>[   76.116851] sec-battery sec-battery: sec_bat_temperature: HT(500), HR(430), LT(-30), LR(0)
  1429. <6>[   76.116851] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
  1430. <6>[   76.116851] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1431. <6>[   76.117340] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1432. <6>[   78.036743] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1433. <6>[   87.536254] sec-fuelgauge 11-0036: 0x02(0xc8), 0x03(0xb0), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1434. <6>[   87.539215] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x12), 0x17(0xf3), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1435. <6>[   87.539215] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1436. <6>[   87.539581] max77693_get_input_current: CHG_CNFG_09(0x17)
  1437. <6>[   87.548370] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4013mV),Inow(460mA),SOC(71%),Tbat(339)
  1438. <6>[   87.549407] max77693_get_charger_state: CHG_DTLS : 0x 1
  1439. <6>[   87.549407] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1440. <6>[   87.549926] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1441. <6>[   89.036743] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1442. <6>[   98.968872] sec-fuelgauge 11-0036: 0x02(0xc8), 0x03(0xe0), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1443. <6>[   98.971740] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x0e), 0x17(0x36), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1444. <6>[   98.971771] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1445. <6>[   98.972106] max77693_get_input_current: CHG_CNFG_09(0x17)
  1446. <6>[   98.980895] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4017mV),Inow(460mA),SOC(71%),Tbat(339)
  1447. <6>[   98.981903] max77693_get_charger_state: CHG_DTLS : 0x 1
  1448. <6>[   98.981933] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1449. <6>[   98.982421] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1450. <6>[  100.036743] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1451. <6>[  110.401397] sec-fuelgauge 11-0036: 0x02(0xc8), 0x03(0xe0), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1452. <6>[  110.404235] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x0e), 0x17(0x36), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1453. <6>[  110.404266] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1454. <6>[  110.404602] max77693_get_input_current: CHG_CNFG_09(0x17)
  1455. <6>[  110.413421] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4017mV),Inow(460mA),SOC(71%),Tbat(338)
  1456. <6>[  110.414428] max77693_get_charger_state: CHG_DTLS : 0x 1
  1457. <6>[  110.414459] sec-battery sec-battery: sec_bat_time_management: Charging Time : 99 secs
  1458. <6>[  110.414459] sec-battery sec-battery: sec_bat_temperature: HT(500), HR(430), LT(-30), LR(0)
  1459. <6>[  110.414459] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
  1460. <6>[  110.414489] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1461. <6>[  110.414978] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1462. <6>[  111.036743] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1463. <6>[  121.833953] sec-fuelgauge 11-0036: 0x02(0xc8), 0x03(0xd0), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1464. <6>[  121.836822] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x0e), 0x17(0x36), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1465. <6>[  121.836822] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1466. <6>[  121.837188] max77693_get_input_current: CHG_CNFG_09(0x17)
  1467. <6>[  121.845977] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4016mV),Inow(460mA),SOC(71%),Tbat(338)
  1468. <6>[  121.847015] max77693_get_charger_state: CHG_DTLS : 0x 1
  1469. <6>[  121.847015] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1470. <6>[  121.847534] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1471. <6>[  122.036743] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1472. <6>[  133.036743] [SSP]: debug_work_func(2) - Sensor state: 0x7ff, RC: 0, MS: 0
  1473. <6>[  133.266418] sec-fuelgauge 11-0036: 0x02(0xc8), 0x03(0xf0), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1474. <6>[  133.269378] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x0e), 0x17(0x36), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1475. <6>[  133.269378] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1476. <6>[  133.269714] max77693_get_input_current: CHG_CNFG_09(0x17)
  1477. <6>[  133.278533] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4018mV),Inow(460mA),SOC(71%),Tbat(337)
  1478. <6>[  133.279571] max77693_get_charger_state: CHG_DTLS : 0x 1
  1479. <6>[  133.279571] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1480. <6>[  133.280059] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1481. <6>[  144.036743] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1482. <6>[  144.699035] sec-fuelgauge 11-0036: 0x02(0xc8), 0x03(0xf0), 0x04(0x8f), 0x05(0x64), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1483. <6>[  144.701873] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x0a), 0x17(0xa9), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1484. <6>[  144.701904] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1485. <6>[  144.702239] max77693_get_input_current: CHG_CNFG_09(0x17)
  1486. <6>[  144.711059] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4018mV),Inow(460mA),SOC(71%),Tbat(337)
  1487. <6>[  144.712066] max77693_get_charger_state: CHG_DTLS : 0x 1
  1488. <6>[  144.712097] sec-battery sec-battery: sec_bat_time_management: Charging Time : 133 secs
  1489. <6>[  144.712097] sec-battery sec-battery: sec_bat_temperature: HT(500), HR(430), LT(-30), LR(0)
  1490. <6>[  144.712097] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
  1491. <6>[  144.712097] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1492. <6>[  144.712615] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1493. <6>[  155.036743] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1494. <6>[  156.131561] sec-fuelgauge 11-0036: 0x02(0xc9), 0x03(0x00), 0x04(0x8f), 0x05(0xb0), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1495. <6>[  156.134429] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x0a), 0x17(0xcf), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1496. <6>[  156.134460] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1497. <6>[  156.134796] max77693_get_input_current: CHG_CNFG_09(0x17)
  1498. <6>[  156.143585] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4020mV),Inow(460mA),SOC(71%),Tbat(337)
  1499. <6>[  156.144592] max77693_get_charger_state: CHG_DTLS : 0x 1
  1500. <6>[  156.144622] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1501. <6>[  156.145111] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1502. <6>[  166.036712] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1503. <6>[  167.564056] sec-fuelgauge 11-0036: 0x02(0xc8), 0x03(0xf0), 0x04(0x8f), 0x05(0xb0), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1504. <6>[  167.566955] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x0a), 0x17(0xcf), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1505. <6>[  167.566955] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1506. <6>[  167.567291] max77693_get_input_current: CHG_CNFG_09(0x17)
  1507. <6>[  167.576110] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4018mV),Inow(460mA),SOC(71%),Tbat(336)
  1508. <6>[  167.577148] max77693_get_charger_state: CHG_DTLS : 0x 1
  1509. <6>[  167.577148] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1510. <6>[  167.577636] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1511. <6>[  177.036743] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1512. <6>[  178.996551] sec-fuelgauge 11-0036: 0x02(0xc9), 0x03(0x00), 0x04(0x8f), 0x05(0xb0), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1513. <6>[  178.999481] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x0a), 0x17(0xcf), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1514. <6>[  178.999511] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1515. <6>[  178.999847] max77693_get_input_current: CHG_CNFG_09(0x17)
  1516. <6>[  179.008666] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4020mV),Inow(460mA),SOC(71%),Tbat(336)
  1517. <6>[  179.009674] max77693_get_charger_state: CHG_DTLS : 0x 1
  1518. <6>[  179.009704] sec-battery sec-battery: sec_bat_time_management: Charging Time : 168 secs
  1519. <6>[  179.009704] sec-battery sec-battery: sec_bat_temperature: HT(500), HR(430), LT(-30), LR(0)
  1520. <6>[  179.009704] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
  1521. <6>[  179.009704] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1522. <6>[  179.010223] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1523. <6>[  188.036712] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1524. <6>[  190.429199] sec-fuelgauge 11-0036: 0x02(0xc9), 0x03(0x10), 0x04(0x8f), 0x05(0xb0), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1525. <6>[  190.432037] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x08), 0x17(0x1b), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1526. <6>[  190.432067] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1527. <6>[  190.432403] max77693_get_input_current: CHG_CNFG_09(0x17)
  1528. <6>[  190.441223] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4021mV),Inow(460mA),SOC(71%),Tbat(336)
  1529. <6>[  190.442230] max77693_get_charger_state: CHG_DTLS : 0x 1
  1530. <6>[  190.442260] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1531. <6>[  190.442749] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1532. <6>[  199.036743] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1533. <6>[  201.861694] sec-fuelgauge 11-0036: 0x02(0xc9), 0x03(0x10), 0x04(0x8f), 0x05(0xb0), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1534. <6>[  201.864562] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x08), 0x17(0x1b), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1535. <6>[  201.864593] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1536. <6>[  201.864929] max77693_get_input_current: CHG_CNFG_09(0x17)
  1537. <6>[  201.873718] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4021mV),Inow(460mA),SOC(71%),Tbat(336)
  1538. <6>[  201.874725] max77693_get_charger_state: CHG_DTLS : 0x 1
  1539. <6>[  201.874755] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1540. <6>[  201.875244] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1541. <6>[  210.036743] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1542. <6>[  213.294189] sec-fuelgauge 11-0036: 0x02(0xc9), 0x03(0x10), 0x04(0x8f), 0x05(0xb0), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1543. <6>[  213.297088] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x08), 0x17(0x1b), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1544. <6>[  213.297088] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1545. <6>[  213.297424] max77693_get_input_current: CHG_CNFG_09(0x17)
  1546. <6>[  213.306243] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4021mV),Inow(460mA),SOC(71%),Tbat(336)
  1547. <6>[  213.307281] max77693_get_charger_state: CHG_DTLS : 0x 1
  1548. <6>[  213.307281] sec-battery sec-battery: sec_bat_time_management: Charging Time : 202 secs
  1549. <6>[  213.307312] sec-battery sec-battery: sec_bat_temperature: HT(500), HR(430), LT(-30), LR(0)
  1550. <6>[  213.307312] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
  1551. <6>[  213.307312] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1552. <6>[  213.307800] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1553. <6>[  221.036743] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1554. <6>[  224.726745] sec-fuelgauge 11-0036: 0x02(0xc9), 0x03(0x10), 0x04(0x8f), 0x05(0xb0), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1555. <6>[  224.729614] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x08), 0x17(0x1b), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1556. <6>[  224.729644] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1557. <6>[  224.729980] max77693_get_input_current: CHG_CNFG_09(0x17)
  1558. <6>[  224.738800] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4021mV),Inow(460mA),SOC(71%),Tbat(335)
  1559. <6>[  224.739807] max77693_get_charger_state: CHG_DTLS : 0x 1
  1560. <6>[  224.739837] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1561. <6>[  224.740325] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1562. <6>[  232.036743] [SSP]: debug_work_func(1) - Sensor state: 0x7ff, RC: 0, MS: 0
  1563. <6>[  236.159271] sec-fuelgauge 11-0036: 0x02(0xc9), 0x03(0x20), 0x04(0x8f), 0x05(0xb0), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1564. <6>[  236.162139] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x06), 0x17(0x14), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1565. <6>[  236.162170] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1566. <6>[  236.162506] max77693_get_input_current: CHG_CNFG_09(0x17)
  1567. <6>[  236.171325] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4022mV),Inow(460mA),SOC(71%),Tbat(335)
  1568. <6>[  236.172332] max77693_get_charger_state: CHG_DTLS : 0x 1
  1569. <6>[  236.172363] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1570. <6>[  236.172851] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1571. <6>[  243.036743] [SSP]: debug_work_func(2) - Sensor state: 0x7ff, RC: 0, MS: 0
  1572. <6>[  247.591796] sec-fuelgauge 11-0036: 0x02(0xc9), 0x03(0x30), 0x04(0x8f), 0x05(0xb0), 0x06(0x00), 0x07(0x00), 0x08(0x00), 0x09(0x12), 0x0a(0x00), 0x0b(0x00), 0x0c(0x67), 0x0d(0x1e),
  1573. <6>[  247.594665] sec-fuelgauge 11-0036: 0x14(0x00), 0x15(0xff), 0x16(0x06), 0x17(0x14), 0x18(0x7d), 0x19(0x00), 0x1a(0x01), 0x1b(0xff),
  1574. <6>[  247.594665] sec-fuelgauge 11-0036: sec_fg_get_atomic_capacity: old : 71, current : 71
  1575. <6>[  247.595031] max77693_get_input_current: CHG_CNFG_09(0x17)
  1576. <6>[  247.603820] sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4023mV),Inow(460mA),SOC(71%),Tbat(336)
  1577. <6>[  247.604827] max77693_get_charger_state: CHG_DTLS : 0x 1
  1578. <6>[  247.604858] sec-battery sec-battery: sec_bat_time_management: Charging Time : 236 secs
  1579. <6>[  247.604858] sec-battery sec-battery: sec_bat_temperature: HT(500), HR(430), LT(-30), LR(0)
  1580. <6>[  247.604858] sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
  1581. <6>[  247.604858] sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1582. <6>[  247.605377] max77693-muic max77693-muic: func:max77693_muic_monitor_status, ST1:0x3f, ST2:0x41 CABLE:1
  1583. <4>[  249.158172] adbd (196): /proc/196/oom_adj is deprecated, please use /proc/196/oom_score_adj instead.
clone this paste RAW Paste Data