Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- HELLO! BOOT0 is starting!
- boot0 commit : 045061a8bb2580cb3fa02e301f52a015040c158f
- boot0 version : 4.0.0
- set pll start
- set pll end
- rtc[0] value = 0x00000000
- rtc[1] value = 0x00000000
- rtc[2] value = 0x00000000
- rtc[3] value = 0x00000000
- rtc[4] value = 0x00000000
- rtc[5] value = 0x00000000
- DRAM driver version: V1.1
- rsb_send_initseq: rsb clk 400Khz -> 3Mhz
- PMU: AXP81X
- ddr voltage = 1500 mv
- DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
- DRAM clk = 672 MHz
- DRAM zq value: 003b3bbb
- DRAM single rank full DQ OK
- DRAM size = 1024 MB
- DRAM init ok
- dram size =1024
- card boot number = 0, boot0 copy = 0
- card no is 0
- sdcard 0 line count 4
- [mmc]: mmc driver ver 2015-05-08 20:06
- [mmc]: sdc0 spd mode error, 2
- [mmc]: Wrong media type 0x00000000
- [mmc]: ***Try SD card 0***
- [mmc]: HSSDR52/SDR25 4 bit
- [mmc]: 50000000 Hz
- [mmc]: 3796 MB
- [mmc]: ***SD/MMC 0 init OK!!!***
- sdcard 0 init ok
- The size of uboot is 000e4000.
- sum=c5ba6e0a
- src_sum=c5ba6e0a
- Succeed in loading uboot from sdmmc flash.
- boot0: start load other image
- boot0: Loading BL3-1
- Loading file 0 at address 0x40000000,size 0x0000a200 success
- boot0: Loading scp
- Loading file 2 at address 0x00040000,size 0x00019a00 success
- set arisc reset to de-assert state
- Ready to disable icache.
- ? Configuring SPC Controller
- NOTICE: BL3-1: v1.0(debug):e9fc343
- NOTICE: BL3-1: Built : 10:39:34, Dec 7 2016
- INFO: BL3-1: Initializing runtime services
- INFO: BL3-1: Preparing for EL3 exit to normal world
- INFO: BL3-1: Next image address = 0x4a000000
- INFO: BL3-1: Next image spsr = 0x1d3
- U-Boot 2014.07-4-pine64-gf1d5b11-dirty (Dec 07 2016 - 10:39:35) Allwinner Technology
- uboot commit : f1d5b11a5aa3d399543bb36dd6438c2f3fa143da
- rsb: secure monitor exist
- [ 0.381]pmbus: ready
- [ 0.383][ARISC] :arisc initialize
- [ 0.709][ARISC] :arisc_dvfs_cfg_vf_table: support only one vf_table
- [SCP] :sunxi-arisc driver begin startup 2
- [SCP] :arisc_para size:1a8
- [SCP] :arisc version: [v0.1.76]
- [SCP] :sunxi-arisc driver v1.10 is starting
- [ 0.835][ARISC] :sunxi-arisc driver startup succeeded
- [ 0.868]PMU: AXP81X
- [ 0.870]PMU: AXP81X found
- bat_vol=203, ratio=100
- [ 0.877]PMU: dcdc2 1100
- [ 0.880]PMU: cpux 1008 Mhz,AXI=336 Mhz
- PLL6=600 Mhz,AHB1=200 Mhz, APB1=100Mhz AHB2=300Mhz MBus=400Mhz
- device_type = 3253, onoff=1
- dcdc1_vol = 3300, onoff=1
- dcdc2_vol = 1100, onoff=1
- dcdc6_vol = 1100, onoff=1
- aldo1_vol = 2800, onoff=0
- aldo2_vol = 1800, onoff=1
- aldo3_vol = 3000, onoff=1
- dldo1_vol = 3300, onoff=0
- dldo2_vol = 3300, onoff=0
- dldo3_vol = 2800, onoff=0
- dldo4_vol = 3300, onoff=1
- eldo1_vol = 1800, onoff=1
- eldo2_vol = 1800, onoff=0
- eldo3_vol = 1800, onoff=0
- fldo1_vol = 1200, onoff=0
- fldo2_vol = 1100, onoff=1
- gpio0_vol = 3100, onoff=0
- vbus not exist
- no battery, limit to dc
- run key detect
- fel key not configed
- time out
- key not pressed anymore
- no uart input
- DRAM: 1008 MiB
- fdt addr: 0x76ebf500
- Relocation Offset is: 35f11000
- In: serial
- Out: serial
- Err: serial
- gic: sec monitor mode
- [ 12.155]start
- drv_disp_init
- init_clocks: finish init_clocks.
- enable power vcc-hdmi-33, ret=0
- drv_disp_init finish
- boot_disp.output_disp=0
- boot_disp.output_type=3
- boot_disp.output_mode=10
- fetch script data boot_disp.auto_hpd fail
- disp0 device type(4) enable
- attched ok, mgr0<-->device1, type=4, mode=10
- [ 12.528]end
- workmode = 0,storage type = 1
- [ 12.532]MMC: 0
- [mmc]: mmc driver ver 2015-06-03 13:50:00
- WARNING: Unimplemented Standard Service Call: 0x8000ff05
- WARNING: Unimplemented Standard Service Call: 0x8000ff05
- WARNING: Unimplemented Standard Service Call: 0x8000ff05
- WARNING: Unimplemented Standard Service Call: 0x8000ff05
- WARNING: Unimplemented Standard Service Call: 0x8000ff06
- WARNING: Unimplemented Standard Service Call: 0x8000ff06
- WARNING: Unimplemented Standard Service Call: 0x8000ff06
- SUNXI SD/MMC: 0
- [mmc]: start mmc_calibrate_delay_unit, don't access device...
- [mmc]: delay chain cal done, sample: 192(ps)
- [mmc]: media type 0x0
- [mmc]: Wrong media type 0x0
- [mmc]: ************Try SD card 0************
- [mmc]: host caps: 0x27
- [mmc]: MID 27 PSN 01b2b348
- [mmc]: PNM SD4GB -- 0x53-44-34-47-42
- [mmc]: PRV 3.0
- [mmc]: MDT m-2 y-2015
- [mmc]: speed mode : HSSDR52/SDR25
- [mmc]: clock : 50000000 Hz
- [mmc]: bus_width : 4 bit
- [mmc]: user capacity : 3796 MB
- [mmc]: ************SD/MMC 0 init OK!!!************
- [mmc]: erase_grp_size : 0x1WrBlk*0x200=0x200 Byte
- [mmc]: secure_feature : 0x0
- [mmc]: secure_removal_type : 0x0
- [ 12.756]sunxi flash init ok
- [mmc]: Has init
- [ 12.790]---drivers/mmc/mmc.c 2733 mmc_init
- ** Unable to use mmc 0:1 for loading the env **
- Using default environment
- --------fastboot partitions--------
- mbr not exist
- base bootcmd=run mmcbootcmd
- bootcmd set setargs_mmc
- key 1
- recovery key high 12, low 10
- fastboot key high 6, low 4
- no misc partition is found
- to be run cmd=run mmcbootcmd
- update dtb dram start
- update dtb dram end
- WARNING: Unimplemented Standard Service Call: 0x8000ff05
- WARNING: Unimplemented Standard Service Call: 0x8000ff05
- WARNING: Unimplemented Standard Service Call: 0x8000ff05
- WARNING: Unimplemented Standard Service Call: 0x8000ff05
- serial is: ffffffffffffffffffff
- get Pine64 model from DRAM size
- DRAM >512M
- Pine64 model: pine64-plus
- no battery exist
- sunxi_bmp_logo_display
- [mmc]: Has init
- [ 13.014]---drivers/mmc/mmc.c 2733 mmc_init
- ** Unrecognized filesystem type **
- sunxi bmp info error : unable to open logo file bootlogo.bmp
- [ 13.027]inter uboot shell
- Hit any key to stop autoboot: 0
- [mmc]: Has init
- [ 16.142]---drivers/mmc/mmc.c 2733 mmc_init
- ** File not found /boot/uEnv.txt **
- [mmc]: Has init
- [ 16.181]---drivers/mmc/mmc.c 2733 mmc_init
- ** Unrecognized filesystem type **
- [mmc]: Has init
- [ 16.191]---drivers/mmc/mmc.c 2733 mmc_init
- ** File not found /boot/uEnv.txt **
- [mmc]: Has init
- [ 16.231]---drivers/mmc/mmc.c 2733 mmc_init
- 4696 bytes read in 23 ms (199.2 KiB/s)
- Booting with script ...
- ## Executing script at 41000000
- [mmc]: Has init
- [ 16.281]---drivers/mmc/mmc.c 2733 mmc_init
- 140 bytes read in 14 ms (9.8 KiB/s)
- [mmc]: Has init
- [ 16.317]---drivers/mmc/mmc.c 2733 mmc_init
- 67970 bytes read in 31 ms (2.1 MiB/s)
- [mmc]: Has init
- [ 16.361]---drivers/mmc/mmc.c 2733 mmc_init
- 4785854 bytes read in 370 ms (12.3 MiB/s)
- [mmc]: Has init
- [ 16.745]---drivers/mmc/mmc.c 2733 mmc_init
- 11931672 bytes read in 861 ms (13.2 MiB/s)
- Image lacks image_size field, assuming 16MiB
- ## Loading init Ramdisk from Legacy Image at 45300000 ...
- Image Name: uInitrd
- Image Type: ARM Linux RAMDisk Image (gzip compressed)
- Data Size: 4785790 Bytes = 4.6 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 45000000
- Booting using the fdt blob at 0x45000000
- reserving fdt memory region: addr=41010000 size=10000
- reserving fdt memory region: addr=41020000 size=800
- reserving fdt memory region: addr=40100000 size=4000
- reserving fdt memory region: addr=40104000 size=1000
- reserving fdt memory region: addr=40105000 size=1000
- reserving fdt memory region: addr=45000000 size=11000
- Loading Ramdisk to 76a2a000, end 76eba67e ... OK
- Loading Device Tree to 44feb000, end 44ffefff ... OK
- Starting kernel ...
- [mmc]: MMC Device 2 not found
- [mmc]: mmc 2 not find, so not exit
- INFO: BL3-1: Next image address = 0x41080000
- INFO: BL3-1: Next image spsr = 0x3c9
- Loading, please wait...
- starting version 229
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
- done.
- Begin: Will now check root file system ... fsck from util-linux 2.27.1
- [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
- /dev/mmcblk0p1: clean, 141841/187680 files, 551282/749312 blocks
- done.
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- Welcome to Ubuntu 16.04.1 LTS!
- [ OK ] Listening on Syslog Socket.
- [ OK ] Listening on fsck to fsckd communication Socket.
- [ OK ] Reached target Encrypted Volumes.
- [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
- [ OK ] Started Dispatch Password Requests to Console Directory Watch.
- [ OK ] Reached target Swap.
- [ OK ] Listening on Journal Socket (/dev/log).
- [ OK ] Reached target User and Group Name Lookups.
- [ OK ] Listening on udev Kernel Socket.
- [ OK ] Reached target Remote File Systems (Pre).
- [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
- [ OK ] Listening on Journal Socket.
- [ OK ] Created slice User and Session Slice.
- [ OK ] Started Forward Password Requests to Wall Directory Watch.
- [ OK ] Listening on udev Control Socket.
- [ OK ] Reached target Remote File Systems.
- [ OK ] Created slice System Slice.
- Starting Restore / save the current clock...
- Starting Load Kernel Modules...
- [ OK ] Created slice system-serial\x2dgetty.slice.
- Starting Nameserver information manager...
- Starting Set console keymap...
- Mounting Huge Pages File System...
- Mounting Debug File System...
- [ OK ] Reached target Slices.
- Mounting POSIX Message Queue File System...
- Starting Create list of required st... nodes for the current kernel...
- Starting Remount Root and Kernel File Systems...
- [ OK ] Mounted Debug File System.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Started Restore / save the current clock.
- [ OK ] Started Create list of required sta...ce nodes for the current kernel.
- [ OK ] Started Set console keymap.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Started Nameserver information manager.
- Starting udev Coldplug all Devices...
- Starting Load/Save Random Seed...
- Starting Create Static Device Nodes in /dev...
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Started Load Kernel Modules.
- Mounting Configuration File System...
- Mounting FUSE Control File System...
- Starting Apply Kernel Variables...
- [ OK ] Mounted FUSE Control File System.
- [ OK ] Mounted Configuration File System.
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Started udev Coldplug all Devices.
- Starting udev Kernel Device Manager...
- [ OK ] Reached target Local File Systems (Pre).
- Mounting /tmp...
- [ OK ] Mounted /tmp.
- [ OK ] Reached target Local File Systems.
- Starting Raise network interfaces...
- Starting Set console font and keymap...
- [ OK ] Started Entropy daemon using the HAVEGE algorithm.
- Starting Journal Service...
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Reached target Sound Card.
- [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
- Starting Load/Save RF Kill Switch Status...
- [ OK ] Started Load/Save RF Kill Switch Status.
- [ OK ] Started Journal Service.
- Starting Flush Journal to Persistent Storage...
- [ 26.193108] Call trace:
- [ 26.196095] Call trace:
- [ OK ] Started Flush Journal to Persistent Storage.
- [ OK ] Found device /dev/ttyS0.
- Starting Create Volatile Files and Directories...
- [ OK ] Started Create Volatile Files and Directories.
- Starting Update UTMP about System Boot/Shutdown...
- [ OK ] Reached target System Time Synchronized.
- [ 26.477598] Call trace:
- [ 26.482630] Call trace:
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Reached target System Initialization.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
- [ OK ] Reached target Paths.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Reached target Basic System.
- [ OK ] Started Regular background program processing daemon.
- Starting Avahi mDNS/DNS-SD Stack...
- Starting System Logging Service...
- Starting LSB: Start/stop sysstat's sadc...
- [ OK ] Started D-Bus System Message Bus.
- [ OK ] Started Avahi mDNS/DNS-SD Stack.
- Starting LSB: No Display Manager...
- Starting Permit User Sessions...
- Starting LSB: Armbian gathering hardware information...
- Starting LSB: Load kernel modules needed to enable cpufreq scaling...
- Starting Save/Restore Sound Card State...
- Starting Accounts Service...
- Starting Network Manager...
- Starting LSB: Starts LIRC daemon....
- Starting Login Service...
- [ OK ] Started Daily apt activities.
- [ OK ] Reached target Timers.
- [ OK ] Started System Logging Service.
- [ OK ] Started Permit User Sessions.
- [ 27.318841] Call trace:
- [ 27.322188] Call trace:
- [ OK ] Started Save/Restore Sound Card State.
- [ OK ] Started LSB: Start/stop sysstat's sadc.
- [ OK ] Started LSB: No Display Manager.
- [ OK ] Started Login Service.
- [ OK ] Started ifup for eth0.
- Starting Set console scheme...
- [ OK ] Started Raise network interfaces.
- [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
- [ OK ] Started LSB: Starts LIRC daemon..
- [ OK ] Started Set console scheme.
- Stopping LSB: Starts LIRC daemon....
- Starting LSB: set CPUFreq kernel parameters...
- [ OK ] Stopped LSB: Starts LIRC daemon..
- [ OK ] Started LSB: set CPUFreq kernel parameters.
- Starting LSB: Set sysfs variables from /etc/sysfs.conf...
- Starting LSB: Starts LIRC daemon....
- [ OK ] Started LSB: Starts LIRC daemon..
- [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
- Starting Authenticate and Authorize Users to Run Privileged Tasks...
- [ OK ] Started Network Manager.
- Starting Network Manager Script Dispatcher Service...
- [ OK ] Reached target Network.
- Starting OpenBSD Secure Shell server...
- Starting Network Manager Wait Online...
- [ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks.
- [ OK ] Started Accounts Service.
- [ OK ] Started Network Manager Script Dispatcher Service.
- Starting Hostname Service...
- [ OK ] Started OpenBSD Secure Shell server.
- [ OK ] Started Hostname Service.
- [FAILED] Failed to start Set console font and keymap.
- See 'systemctl status console-setup.service' for details.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Started LSB: Armbian gathering hardware information.
- Starting LSB: PLEASE DO NOT INTERRUPT THE FIRST BOOT...
- [ OK ] Started Network Manager Wait Online.
- [ OK ] Reached target Network is Online.
- Starting /etc/rc.local Compatibility...
- Starting LSB: disk temperature monitoring daemon...
- Starting LSB: Advanced IEEE 802.11 management daemon...
- Starting LSB: Start NTP daemon...
- [ OK ] Started /etc/rc.local Compatibility.
- [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
- [ OK ] Started LSB: disk temperature monitoring daemon.
- [ OK ] Started Getty on tty1.
- [ OK ] Started Serial Getty on ttyS0.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started LSB: Start NTP daemon.
- Ubuntu 16.04.1 LTS pine64 ttyS0
- pine64 login: root
- Password:
- You are required to change your password immediately (root enforced)
- Changing password for root.
- (current) UNIX password:
- Enter new UNIX password:
- Retype new UNIX password:
- ____ _ __ _ _
- | _ \(_)_ __ ___ / /_ | || |
- | |_) | | '_ \ / _ \ '_ \| || |_
- | __/| | | | | __/ (_) |__ _|
- |_| |_|_| |_|\___|\___/ |_|
- Welcome to ARMBIAN Ubuntu 16.04.1 LTS 3.10.104-pine64
- System load: 0.31 Up time: 2 min
- Memory usage: 5 % of 980Mb IP: 192.168.83.149
- Usage of /: 67% of 3.4G
- [ 5 updates to install: apt-get upgrade ]
- New to Armbian? Check the documentation first: docs.armbian.com
- Thank you for choosing Armbian! Support: www.armbian.com
- Creating new account. Please provide a username (eg. your forename): tk
- Adding user `tk' ...
- Adding new group `tk' (1000) ...
- Adding new user `tk' (1000) with group `tk' ...
- Creating home directory `/home/tk' ...
- Copying files from `/etc/skel' ...
- Enter new UNIX password:
- Retype new UNIX password:
- passwd: password updated successfully
- Changing the user information for tk
- Enter the new value, or press ENTER for the default
- Full Name []: Thomas Kaiser
- Room Number []:
- Work Phone []:
- Home Phone []:
- Other []:
- Is the information correct? [Y/n]
- Dear Thomas Kaiser, your account tk has been created and is sudo enabled.
- Please use this account for your daily work from now on.
- Now starting desktop environment...
- root@pine64:~#
- root@pine64:~# reboot
- Stopping Session c2 of user tk.
- [ OK ] Stopped target Timers.
- Stopping User Manager for UID 0...
- [ OK ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch.
- [ OK ] Stopped target Graphical Interface.
- Stopping Save/Restore Sound Card State...
- [ OK ] Stopped Daily apt activities.
- [ OK ] Stopped target System Time Synchronized.
- Stopping LSB: PLEASE DO NOT INTERRUPT THE FIRST BOOT...
- Stopping Disk Manager...
- Stopping Authenticate and Authorize Users to Run Privileged Tasks...
- [ OK ] Stopped target Multi-User System.
- Stopping LSB: Set sysfs variables from /etc/sysfs.conf...
- Stopping LSB: disk temperature monitoring daemon...
- Stopping LSB: No Display Manager...
- Stopping System Logging Service...
- Stopping LSB: Start/stop sysstat's sadc...
- Stopping LSB: Start NTP daemon...
- Stopping Regular background program proces Stopping Serial Getty on ttyS0...
- Stopping Getty on tty1...
- [ OK ] Stopped Session c1 of user root.
- Stopping Accounts Service...
- [ OK ] Unmounted /run/user/1000/gvfs.
- [ OK ] Stopped Regular background program processing daemon.
- [ OK ] Stopped Avahi mDNS/DNS-SD Stack.
- [ OK ] Stopped System Logging Service.
- [ OK ] Stopped Accounts Service.
- [ OK ] Stopped Authenticate and Authorize Users to Run Privileged Tasks.
- [ OK ] Stopped Getty on tty1.
- [ OK ] Stopped Serial Getty on ttyS0.
- [ OK ] Stopped OpenBSD Secure Shell server.
- [ OK ] Stopped Disk Manager.
- [ OK ] Stopped Save/Restore Sound Card State.
- [ OK ] Stopped LSB: PLEASE DO NOT INTERRUPT THE FIRST BOOT.
- [ OK ] Stopped Session c2 of user tk.
- [ OK ] Stopped LSB: Advanced IEEE 802.11 management daemon.
- [ OK ] Stopped LSB: disk temperature monitoring daemon.
- [ OK ] Stopped LSB: Start/stop sysstat's sadc.
- [ OK ] Stopped LSB: No Display Manager.
- [ OK ] Stopped LSB: Starts LIRC daemon..
- [ OK ] Stopped LSB: Set sysfs variables from /etc/sysfs.conf.
- [ OK ] Stopped LSB: Start NTP daemon.
- Stopping LSB: set CPUFreq kernel parameters...
- Stopping LSB: Armbian gathering hardware information...
- [ OK ] Removed slice system-serial\x2dgetty.slice.
- [ OK ] Stopped /etc/rc.local Compatibility.
- [ OK ] Stopped target Network is Online.
- [ OK ] Stopped Network Manager Wait Online.
- [ OK ] Stopped target Network.
- Stopping Raise network interfaces...
- Stopping Network Manager...
- [ OK ] Removed slice system-getty.slice.
- [ OK ] Stopped LSB: set CPUFreq kernel parameters.
- Stopping LSB: Load kernel modules needed to enable cpufreq scaling...
- [ OK ] Stopped LSB: Load kernel modules needed to enable cpufreq scaling.
- [ OK ] Stopped LSB: Starts LIRC daemon..
- [ 228.338616] Call trace:
- [ 228.377725] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
- [ 228.385326] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
- [ 228.396390] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 8, RTO !!
- [ 228.403904] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
- [ 228.411420] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
- [ 228.418916] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
- [ 228.426397] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
- [ 228.433900] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
- [ 228.441509] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
- [ 228.449131] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
- [ 228.456725] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
- [ 228.464374] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 1, RTO !!
- [ OK ] Stopped Network Manager.
- Stopping D-Bus System Message Bus...
- [ OK ] Stopped User Manager for UID 0.
- [ OK ] Stopped User Manager for UID 1000.
- [ OK ] Removed slice User Slice of tk.
- [ OK ] Removed slice User Slice of root.
- Stopping Permit User Sessions...
- Stopping Login Service...
- [ OK ] Stopped Login Service.
- [ OK ] Stopped D-Bus System Message Bus.
- [ OK ] Stopped Permit User Sessions.
- [ OK ] Stopped target Remote File Systems.
- [ OK ] Stopped target Remote File Systems (Pre).
- [ OK ] Stopped target User and Group Name Lookups.
- [ OK ] Stopped Raise network interfaces.
- [ OK ] Started Unattended Upgrades Shutdown.
- [ OK ] Stopped LSB: Armbian gathering hardware information.
- [ OK ] Stopped target Basic System.
- [ OK ] Stopped target Slices.
- [ OK ] Removed slice User and Session Slice.
- [ OK ] Stopped target Paths.
- [ OK ] Stopped Forward Password Requests to Wall Directory Watch.
- [ OK ] Stopped Dispatch Password Requests to Console Directory Watch.
- [ OK ] Stopped target Sockets.
- [ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket.
- [ OK ] Closed D-Bus System Message Bus Socket.
- [ OK ] Stopped target System Initialization.
- [ OK ] Stopped target Encrypted Volumes.
- [ OK ] Stopped Apply Kernel Variables.
- Stopping Entropy daemon using the HAVEGE algorithm...
- [ OK ] Stopped Load Kernel Modules.
- Stopping Restore / save the current clock...
- Stopping Update UTMP about System Boot/Shutdown...
- [ OK ] Stopped target Swap.
- Deactivating swap /var/swap...
- [ OK ] Closed Syslog Socket.
- [ OK ] Stopped Entropy daemon using the HAVEGE algorithm.
- [ OK ] Stopped Restore / save the current clock.
- [ OK ] Deactivated swap /var/swap.
- [ OK ] Stopped Update UTMP about System Boot/Shutdown.
- [ OK ] Stopped Create Volatile Files and Directories.
- [ OK ] Stopped target Local File Systems.
- Unmounting /run/user/0...
- Unmounting /run/user/1000...
- Unmounting /tmp...
- Stopping Load/Save Random Seed...
- [ OK ] Unmounted /run/user/0.
- [ OK ] Unmounted /run/user/1000.
- [FAILED] Failed unmounting /tmp.
- [ 234.651834] pgd = ffffffc0380dd000
- [ OK [ 234.667956] [00000028] *pgd=000000007698b003] Stopped Load/Save Random Seed.
- , *pmd=0000000000000000
- [ OK ] Reached target Unmount All Filesystems.
- [ OK ] Stopped target Local File Systems (Pre).
- [ OK ] Stopped Remount Root and Kernel File Systems.
- [ OK ] Stopped Create Static Device Nodes in /dev.
- [ OK ] Reached target Shutdown.
- [ 238.108992] Restarting system.
- INFO: PSCI Affinity Map:
- INFO: AffInst: Level 0, MPID 0x0, State ON
- INFO: AffInst: Level 0, MPID 0x1, State OFF
- INFO: AffInst: Level 0, MPID 0x2, State OFF
- INFO: AffInst: Level 0, MPID 0x3, State OFF
- HELLO! BOOT0 is starting!
- boot0 commit : 045061a8bb2580cb3fa02e301f52a015040c158f
- boot0 version : 4.0.0
- set pll start
- set pll end
- rtc[0] value = 0x00000000
- rtc[1] value = 0x00000000
- rtc[2] value = 0x00000000
- rtc[3] value = 0x0000a102
- rtc[4] value = 0x00000000
- rtc[5] value = 0x00000000
- DRAM driver version: V1.1
- rsb_send_initseq: rsb clk 400Khz -> 3Mhz
- PMU: AXP81X
- ddr voltage = 1500 mv
- DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
- DRAM clk = 672 MHz
- DRAM zq value: 003b3bbb
- DRAM single rank full DQ OK
- DRAM size = 1024 MB
- DRAM init ok
- dram size =1024
- card boot number = 0, boot0 copy = 0
- card no is 0
- sdcard 0 line count 4
- [mmc]: mmc driver ver 2015-05-08 20:06
- [mmc]: sdc0 spd mode error, 2
- [mmc]: Wrong media type 0x00000000
- [mmc]: ***Try SD card 0***
- [mmc]: HSSDR52/SDR25 4 bit
- [mmc]: 50000000 Hz
- [mmc]: 3796 MB
- [mmc]: ***SD/MMC 0 init OK!!!***
- sdcard 0 init ok
- The size of uboot is 000e4000.
- sum=c5ba6e0a
- src_sum=c5ba6e0a
- Succeed in loading uboot from sdmmc flash.
- boot0: start load other image
- boot0: Loading BL3-1
- Loading file 0 at address 0x40000000,size 0x0000a200 success
- boot0: Loading scp
- Loading file 2 at address 0x00040000,size 0x00019a00 success
- set arisc reset to de-assert state
- Ready to disable icache.
- ? Configuring SPC Controller
- NOTICE: BL3-1: v1.0(debug):e9fc343
- NOTICE: BL3-1: Built : 10:39:34, Dec 7 2016
- INFO: BL3-1: Initializing runtime services
- INFO: BL3-1: Preparing for EL3 exit to normal world
- INFO: BL3-1: Next image address = 0x4a000000
- INFO: BL3-1: Next image spsr = 0x1d3
- U-Boot 2014.07-4-pine64-gf1d5b11-dirty (Dec 07 2016 - 10:39:35) Allwinner Technology
- uboot commit : f1d5b11a5aa3d399543bb36dd6438c2f3fa143da
- rsb: secure monitor exist
- [ 0.382]pmbus: ready
- [ 0.384][ARISC] :arisc initialize
- [ 0.711][ARISC] :arisc_dvfs_cfg_vf_table: support only one vf_table
- [SCP] :sunxi-arisc driver begin startup 2
- [SCP] :arisc_para size:1a8
- [SCP] :arisc version: [v0.1.76]
- [SCP] :sunxi-arisc driver v1.10 is starting
- [ 0.837][ARISC] :sunxi-arisc driver startup succeeded
- [ 0.870]PMU: AXP81X
- [ 0.872]PMU: AXP81X found
- bat_vol=0, ratio=100
- [ 0.879]PMU: dcdc2 1100
- [ 0.882]PMU: cpux 1008 Mhz,AXI=336 Mhz
- PLL6=600 Mhz,AHB1=200 Mhz, APB1=100Mhz AHB2=300Mhz MBus=400Mhz
- device_type = 3253, onoff=1
- dcdc1_vol = 3300, onoff=1
- dcdc2_vol = 1100, onoff=1
- dcdc6_vol = 1100, onoff=1
- aldo1_vol = 2800, onoff=0
- aldo2_vol = 1800, onoff=1
- aldo3_vol = 3000, onoff=1
- dldo1_vol = 3300, onoff=0
- dldo2_vol = 3300, onoff=0
- dldo3_vol = 2800, onoff=0
- dldo4_vol = 3300, onoff=1
- eldo1_vol = 1800, onoff=1
- eldo2_vol = 1800, onoff=0
- eldo3_vol = 1800, onoff=0
- fldo1_vol = 1200, onoff=0
- fldo2_vol = 1100, onoff=1
- gpio0_vol = 3100, onoff=0
- vbus not exist
- no battery, limit to dc
- run key detect
- no key found
- no uart input
- DRAM: 1008 MiB
- fdt addr: 0x76ebf500
- Relocation Offset is: 35f11000
- In: serial
- Out: serial
- Err: serial
- gic: sec monitor mode
- [ 1.190]start
- drv_disp_init
- init_clocks: finish init_clocks.
- enable power vcc-hdmi-33, ret=0
- drv_disp_init finish
- boot_disp.output_disp=0
- boot_disp.output_type=3
- boot_disp.output_mode=10
- fetch script data boot_disp.auto_hpd fail
- disp0 device type(4) enable
- attched ok, mgr0<-->device1, type=4, mode=10
- [ 1.564]end
- workmode = 0,storage type = 1
- [ 1.568]MMC: 0
- [mmc]: mmc driver ver 2015-06-03 13:50:00
- WARNING: Unimplemented Standard Service Call: 0x8000ff05
- WARNING: Unimplemented Standard Service Call: 0x8000ff05
- WARNING: Unimplemented Standard Service Call: 0x8000ff05
- WARNING: Unimplemented Standard Service Call: 0x8000ff05
- WARNING: Unimplemented Standard Service Call: 0x8000ff06
- WARNING: Unimplemented Standard Service Call: 0x8000ff06
- WARNING: Unimplemented Standard Service Call: 0x8000ff06
- SUNXI SD/MMC: 0
- [mmc]: start mmc_calibrate_delay_unit, don't access device...
- [mmc]: delay chain cal done, sample: 192(ps)
- [mmc]: media type 0x0
- [mmc]: Wrong media type 0x0
- [mmc]: ************Try SD card 0************
- [mmc]: host caps: 0x27
- [mmc]: MID 27 PSN 01b2b348
- [mmc]: PNM SD4GB -- 0x53-44-34-47-42
- [mmc]: PRV 3.0
- [mmc]: MDT m-2 y-2015
- [mmc]: speed mode : HSSDR52/SDR25
- [mmc]: clock : 50000000 Hz
- [mmc]: bus_width : 4 bit
- [mmc]: user capacity : 3796 MB
- [mmc]: ************SD/MMC 0 init OK!!!************
- [mmc]: erase_grp_size : 0x1WrBlk*0x200=0x200 Byte
- [mmc]: secure_feature : 0x0
- [mmc]: secure_removal_type : 0x0
- [ 1.792]sunxi flash init ok
- [mmc]: Has init
- [ 1.827]---drivers/mmc/mmc.c 2733 mmc_init
- ** Unable to use mmc 0:1 for loading the env **
- Using default environment
- --------fastboot partitions--------
- mbr not exist
- base bootcmd=run mmcbootcmd
- bootcmd set setargs_mmc
- key 0
- recovery key high 12, low 10
- fastboot key high 6, low 4
- no misc partition is found
- to be run cmd=run mmcbootcmd
- update dtb dram start
- update dtb dram end
- WARNING: Unimplemented Standard Service Call: 0x8000ff05
- WARNING: Unimplemented Standard Service Call: 0x8000ff05
- WARNING: Unimplemented Standard Service Call: 0x8000ff05
- WARNING: Unimplemented Standard Service Call: 0x8000ff05
- serial is: ffffffffffffffffffff
- get Pine64 model from DRAM size
- DRAM >512M
- Pine64 model: pine64-plus
- no battery exist
- sunxi_bmp_logo_display
- [mmc]: Has init
- [ 2.051]---drivers/mmc/mmc.c 2733 mmc_init
- ** Unrecognized filesystem type **
- sunxi bmp info error : unable to open logo file bootlogo.bmp
- [ 2.065]inter uboot shell
- Hit any key to stop autoboot: 0
- [mmc]: Has init
- [ 5.180]---drivers/mmc/mmc.c 2733 mmc_init
- 26 bytes read in 51 ms (0 Bytes/s)
- Loading boot environment ...
- [mmc]: Has init
- [ 5.248]---drivers/mmc/mmc.c 2733 mmc_init
- 4696 bytes read in 41 ms (111.3 KiB/s)
- Booting with script ...
- ## Executing script at 41000000
- [mmc]: Has init
- [ 5.317]---drivers/mmc/mmc.c 2733 mmc_init
- 140 bytes read in 24 ms (4.9 KiB/s)
- [mmc]: Has init
- [ 5.363]---drivers/mmc/mmc.c 2733 mmc_init
- 67970 bytes read in 54 ms (1.2 MiB/s)
- [mmc]: Has init
- [ 5.430]---drivers/mmc/mmc.c 2733 mmc_init
- 4785854 bytes read in 407 ms (11.2 MiB/s)
- [mmc]: Has init
- [ 5.850]---drivers/mmc/mmc.c 2733 mmc_init
- 11931672 bytes read in 883 ms (12.9 MiB/s)
- Image lacks image_size field, assuming 16MiB
- ## Loading init Ramdisk from Legacy Image at 45300000 ...
- Image Name: uInitrd
- Image Type: ARM Linux RAMDisk Image (gzip compressed)
- Data Size: 4785790 Bytes = 4.6 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 45000000
- Booting using the fdt blob at 0x45000000
- reserving fdt memory region: addr=41010000 size=10000
- reserving fdt memory region: addr=41020000 size=800
- reserving fdt memory region: addr=40100000 size=4000
- reserving fdt memory region: addr=40104000 size=1000
- reserving fdt memory region: addr=40105000 size=1000
- reserving fdt memory region: addr=45000000 size=11000
- Loading Ramdisk to 76a2a000, end 76eba67e ... OK
- Loading Device Tree to 44feb000, end 44ffefff ... OK
- Starting kernel ...
- [mmc]: MMC Device 2 not found
- [mmc]: mmc 2 not find, so not exit
- INFO: BL3-1: Next image address = 0x41080000
- INFO: BL3-1: Next image spsr = 0x3c9
- Loading, please wait...
- starting version 229
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
- done.
- Begin: Will now check root file system ... fsck from util-linux 2.27.1
- [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
- /dev/mmcblk0p1: clean, 141934/236640 files, 608799/921600 blocks
- done.
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- Welcome to Ubuntu 16.04.1 LTS!
- [ OK ] Listening on udev Kernel Socket.
- [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
- [ OK ] Started Forward Password Requests to Wall Directory Watch.
- [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
- [ OK ] Started Dispatch Password Requests to Console Directory Watch.
- [ OK ] Created slice User and Session Slice.
- [ OK ] Listening on udev Control Socket.
- [ OK ] Listening on Syslog Socket.
- [ OK ] Listening on Journal Socket (/dev/log).
- [ OK ] Reached target Remote File Systems (Pre).
- [ OK ] Reached target Remote File Systems.
- [ OK ] Reached target User and Group Name Lookups.
- [ OK ] Reached target Encrypted Volumes.
- [ OK ] Created slice System Slice.
- [ OK ] Reached target Slices.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ OK ] Listening on Journal Socket.
- Mounting POSIX Message Queue File System...
- Starting Nameserver information manager...
- Starting Create list of required st... nodes for the current kernel...
- Mounting Huge Pages File System...
- Mounting Debug File System...
- Starting Set console keymap...
- Starting Load Kernel Modules...
- Starting Restore / save the current clock...
- [ OK ] Listening on fsck to fsckd communication Socket.
- Starting Remount Root and Kernel File Systems...
- [ OK ] Mounted Debug File System.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Started Create list of required sta...ce nodes for the current kernel.
- [ OK ] Started Set console keymap.
- [ OK ] Started Restore / save the current clock.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Started Nameserver information manager.
- Activating swap /var/swap...
- Starting Load/Save Random Seed...
- Starting udev Coldplug all Devices...
- Starting Create Static Device Nodes in /dev...
- [ OK ] Started Load Kernel Modules.
- [ OK ] Activated swap /var/swap.
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Reached target Swap.
- Mounting FUSE Control File System...
- Mounting Configuration File System...
- Starting Apply Kernel Variables...
- [ OK ] Mounted FUSE Control File System.
- [ OK ] Mounted Configuration File System.
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Started udev Coldplug all Devices.
- Starting udev Kernel Device Manager...
- [ OK ] Reached target Local File Systems (Pre).
- Mounting /tmp...
- [ OK ] Mounted /tmp.
- [ OK ] Reached target Local File Systems.
- Starting Raise network interfaces...
- Starting Set console font and keymap...
- [ OK ] Started Entropy daemon using the HAVEGE algorithm.
- Starting Journal Service...
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Reached target Sound Card.
- [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
- Starting Load/Save RF Kill Switch Status...
- [ OK ] Started Journal Service.
- Starting Flush Journal to Persistent Storage...
- [ OK ] Started Flush Journal to Persistent Storage.
- [ OK ] Started Load/Save RF Kill Switch Status.
- Starting Create Volatile Files and Directories...
- [ 15.010428] Call trace:
- [ 15.013638] Call trace:
- [ OK ] Started Create Volatile Files and Directories.
- Starting Update UTMP about System Boot/Shutdown...
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Started Set console font and keymap.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Found device /dev/ttyS0.
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Reached target System Initialization.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Reached target Paths.
- [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Reached target Basic System.
- Starting LSB: Load kernel modules needed to enable cpufreq scaling...
- [ OK ] Started D-Bus System Message Bus.
- Starting Network Manager...
- Starting Accounts Service...
- [ 16.237368] Call trace:
- [ 16.240298] Call trace:
- Starting LSB: Armbian gathering hardware information...
- Starting Permit User Sessions...
- Starting LSB: Start/stop sysstat's sadc...
- Starting System Logging Service...
- [ OK ] Started Regular background program processing daemon.
- Starting Avahi mDNS/DNS-SD Stack...
- Starting Save/Restore Sound Card State...
- Starting LSB: No Display Manager...
- Starting Login Service...
- [ OK ] Started Daily apt activities.
- Starting LSB: Starts LIRC daemon....
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Reached target Timers.
- [ OK ] Started Permit User Sessions.
- [ 16.598926] Call trace:
- [ 16.601892] Call trace:
- [ OK ] Started Save/Restore Sound Card State.
- [ OK ] Started LSB: Start/stop sysstat's sadc.
- [ OK ] Started System Logging Service.
- [ OK ] Started LSB: No Display Manager.
- [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
- [ OK ] Started LSB: Starts LIRC daemon..
- [ OK ] Started Avahi mDNS/DNS-SD Stack.
- [ OK ] Started Raise network interfaces.
- [ OK ] Started Login Service.
- Stopping LSB: Starts LIRC daemon....
- Starting LSB: set CPUFreq kernel parameters...
- [ OK ] Started ifup for eth0.
- Starting Set console scheme...
- [ OK ] Started Set console scheme.
- [ OK ] Stopped LSB: Starts LIRC daemon..
- Starting LSB: Starts LIRC daemon....
- [ OK ] Started LSB: set CPUFreq kernel parameters.
- Starting LSB: Set sysfs variables from /etc/sysfs.conf...
- [ OK ] Started LSB: Starts LIRC daemon..
- [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
- Starting Authenticate and Authorize Users to Run Privileged Tasks...
- [ OK ] Started Network Manager.
- [ OK ] Reached target Network.
- Starting OpenBSD Secure Shell server...
- Starting Network Manager Wait Online...
- [ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks.
- [ OK ] Started Accounts Service.
- Starting Network Manager Script Dispatcher Service...
- [ OK ] Started Network Manager Script Dispatcher Service.
- Starting Hostname Service...
- [ OK ] Started OpenBSD Secure Shell server.
- [ OK ] Started Hostname Service.
- [ OK ] Started LSB: Armbian gathering hardware information.
- [ OK ] Created slice User Slice of tk.
- Starting User Manager for UID 1000...
- [ OK ] Started Session c1 of user tk.
- [ OK ] Started User Manager for UID 1000.
- [ OK ] Started Network Manager Wait Online.
- [ OK ] Reached target Network is Online.
- Starting /etc/rc.local Compatibility...
- Starting LSB: disk temperature monitoring daemon...
- Starting LSB: Advanced IEEE 802.11 management daemon...
- Starting LSB: Start NTP daemon...
- [ OK ] Started /etc/rc.local Compatibility.
- [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
- [ OK ] Started LSB: disk temperature monitoring daemon.
- [ OK ] Started Serial Getty on ttyS0.
- [ OK ] Started Getty on tty1.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started LSB: Start NTP daemon.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Update UTMP about System Runlevel Changes.
- Ubuntu 16.04.1 LTS pine64 ttyS0
- pine64 login: tk
- Password:
- ____ _ __ _ _
- | _ \(_)_ __ ___ / /_ | || |
- | |_) | | '_ \ / _ \ '_ \| || |_
- | __/| | | | | __/ (_) |__ _|
- |_| |_|_| |_|\___|\___/ |_|
- Welcome to ARMBIAN Ubuntu 16.04.1 LTS 3.10.104-pine64
- System load: 1.75 Up time: 26 sec
- Memory usage: 16 % of 980Mb IP: 192.168.83.149
- Usage of /: 67% of 3.4G
- [ 5 updates to install: apt-get upgrade ]
- To run a command as administrator (user "root"), use "sudo <command>".
- See "man sudo_root" for details.
- tk@pine64:~$ sudo armbianmonitor -u
- [sudo] password for tk:
- /var/log/armhwinfo.log has been uploaded to http://sprunge.us/RWfI
- Please post the URL in the Armbian forum where you've been asked for.
- tk@pine64:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement