Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1992-2011 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 9.0-RC3-p1 #2: Tue Jan 3 11:38:07 JST 2012
- root@bsdchan.sunplaza.net:/usr/obj/usr/src/sys/GENERIC i386
- CPU: Intel(R) Atom(TM) CPU N455 @ 1.66GHz (1662.63-MHz 686-class CPU)
- Origin = "GenuineIntel" Id = 0x106ca Family = 6 Model = 1c Stepping = 10
- Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x40e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
- AMD Features=0x20100000<NX,LM>
- AMD Features2=0x1<LAHF>
- TSC: P-state invariant, performance statistics
- real memory = 1073741824 (1024 MB)
- avail memory = 1021005824 (973 MB)
- Event timer "LAPIC" quality 400
- ACPI APIC Table: <ACRSYS ACRPRDCT>
- FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
- FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP/HT): APIC ID: 1
- ioapic0: Changing APIC ID to 4
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- Cuse4BSD v0.1.21 @ /dev/cuse
- kbd1 at kbdmux0
- acpi0: <ACRSYS ACRPRDCT> on motherboard
- acpi0: Power Button (fixed)
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- acpi_ec0: <Embedded Controller: GPE 0x19> port 0x62,0x66 on acpi0
- acpi_button0: <Power Button> on acpi0
- acpi_button1: <Sleep Button> on acpi0
- acpi_lid0: <Control Method Lid Switch> on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- vgapci0: <VGA-compatible display> port 0x60c0-0x60c7 mem 0x58180000-0x581fffff,0x40000000-0x4fffffff,0x58000000-0x580fffff irq 16 at device 2.0 on pci0
- agp0: <Intel Pineview (M) SVGA controller> on vgapci0
- agp0: aperture size is 256M, detected 8188k stolen memory
- vgapci1: <VGA-compatible display> mem 0x58100000-0x5817ffff at device 2.1 on pci0
- hdac0: <Intel 82801G High Definition Audio Controller> mem 0x58200000-0x58203fff irq 19 at device 27.0 on pci0
- pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- alc0: <Atheros AR8152 v1.1 PCIe Fast Ethernet> port 0x5000-0x507f mem 0x57000000-0x5703ffff irq 16 at device 0.0 on pci1
- alc0: 3584 Tx FIFO, 3840 Rx FIFO
- alc0: Using 1 MSI message(s).
- miibus0: <MII bus> on alc0
- atphy0: <Atheros F2 10/100 PHY> PHY 0 on miibus0
- atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
- alc0: Ethernet address: 1c:75:08:c6:5a:02
- pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
- pci2: <ACPI PCI bus> on pcib2
- pci2: <network> at device 0.0 (no driver attached)
- uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x6080-0x609f irq 18 at device 29.0 on pci0
- uhci0: LegSup = 0x2f00
- usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
- uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x6060-0x607f irq 20 at device 29.1 on pci0
- uhci1: LegSup = 0x2f00
- usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
- uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x6040-0x605f irq 21 at device 29.2 on pci0
- uhci2: LegSup = 0x2f00
- usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
- uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x6020-0x603f irq 22 at device 29.3 on pci0
- uhci3: LegSup = 0x2f00
- usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
- ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0x58204400-0x582047ff irq 22 at device 29.7 on pci0
- usbus4: EHCI version 1.0
- usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
- pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
- pci5: <ACPI PCI bus> on pcib3
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- ahci0: <Intel ICH7 AHCI SATA controller> port 0x60b8-0x60bf,0x60cc-0x60cf,0x60b0-0x60b7,0x60c8-0x60cb,0x60a0-0x60af mem 0x58204000-0x582043ff irq 17 at device 31.2 on pci0
- ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
- ahcich0: <AHCI channel> at channel 0 on ahci0
- ahcich1: <AHCI channel> at channel 1 on ahci0
- ichsmb0: <Intel 82801GB (ICH7) SMBus controller> port 0x6000-0x601f irq 17 at device 31.3 on pci0
- smbus0: <System Management Bus> on ichsmb0
- acpi_tz0: <Thermal Zone> on acpi0
- battery0: <ACPI Control Method Battery> on acpi0
- acpi_acad0: <AC Adapter> on acpi0
- atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
- atrtc0: Warning: Couldn't map I/O.
- Event timer "RTC" frequency 32768 Hz quality 0
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 450
- Event timer "HPET1" frequency 14318180 Hz quality 440
- Event timer "HPET2" frequency 14318180 Hz quality 440
- attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- pmtimer0 on isa0
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
- ata1 at port 0x170-0x177,0x376 irq 15 on isa0
- ppc0: parallel port not found.
- est0: <Enhanced SpeedStep Frequency Control> on cpu0
- p4tcc0: <CPU Frequency Thermal Control> on cpu0
- est1: <Enhanced SpeedStep Frequency Control> on cpu1
- p4tcc1: <CPU Frequency Thermal Control> on cpu1
- Timecounters tick every 1.000 msec
- hdac0: HDA Codec #0: Realtek ALC272
- pcm0: <HDA Realtek ALC272 PCM #0 Analog> at cad 0 nid 1 on hdac0
- pcm1: <HDA Realtek ALC272 PCM #1 Analog> at cad 0 nid 1 on hdac0
- usbus0: 12Mbps Full Speed USB v1.0
- usbus1: 12Mbps Full Speed USB v1.0
- usbus2: 12Mbps Full Speed USB v1.0
- usbus3: 12Mbps Full Speed USB v1.0
- usbus4: 480Mbps High Speed USB v2.0
- ugen0.1: <Intel> at usbus0
- uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
- ugen1.1: <Intel> at usbus1
- uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
- ugen2.1: <Intel> at usbus2
- uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
- ugen3.1: <Intel> at usbus3
- uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
- ugen4.1: <Intel> at usbus4
- uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
- ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
- ada0: <WDC WD2500BEVT-22A23T0 01.01A01> ATA-8 SATA 2.x device
- ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada0: Command Queueing enabled
- ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
- ada0: Previously was known as ad4
- SMP: AP CPU #1 Launched!
- uhub0: 2 ports with 2 removable, self powered
- uhub1: 2 ports with 2 removable, self powered
- uhub2: 2 ports with 2 removable, self powered
- uhub3: 2 ports with 2 removable, self powered
- Root mount waiting for: usbus4
- Root mount waiting for: usbus4
- Root mount waiting for: usbus4
- uhub4: 8 ports with 8 removable, self powered
- Root mount waiting for: usbus4
- Root mount waiting for: usbus4
- ugen0.2: <Logitech> at usbus0
- ukbd0: <Logitech Logitech USB Keyboard, class 0/0, rev 1.10/28.00, addr 2> on usbus0
- kbd2 at ukbd0
- ugen4.2: <123> at usbus4
- Trying to mount root from ufs:/dev/ada0s4a [rw]...
- ugen0.3: <vendor 0x192f> at usbus0
- ums0: <vendor 0x192f USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 3> on usbus0
- ums0: 3 buttons and [XYZT] coordinates ID=0
- Setting hostuuid: 364ee69c-9c82-9cb1-2111-1c7508c65a02.
- Setting hostid: 0x0a323c25.
- Entropy harvesting: interrupts ethernet point_to_point kickstart.
- Starting file system checks:
- /dev/ada0s4a: FILE SYSTEM CLEAN; SKIPPING CHECKS
- /dev/ada0s4a: clean, 23501227 free (37779 frags, 2932931 blocks, 0.1% fragmentation)
- Mounting local file systems:.
- Setting hostname: bsdchan.sunplaza.net.
- Starting Network: lo0 alc0.
- lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
- options=3<RXCSUM,TXCSUM>
- inet6 ::1 prefixlen 128
- inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7
- inet 127.0.0.1 netmask 0xff000000
- nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
- alc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
- options=c3198<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MCAST,WOL_MAGIC,VLAN_HWTSO,LINKSTATE>
- ether 1c:75:08:c6:5a:02
- nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
- media: Ethernet autoselect (none)
- status: no carrier
- Starting devd.
- Starting Network: usbus0.
- Starting Network: usbus1.
- Starting Network: usbus2.
- Starting Network: usbus3.
- Starting Network: usbus4.
- Cannot 'start' webcamd. Set webcamd_enable to YES in /etc/rc.conf or use 'onestart' instead of 'start'.
- Cannot 'start' webcamd. Set webcamd_enable to YES in /etc/rc.conf or use 'onestart' instead of 'start'.
- Starting ums0 moused.
- add net ::ffff:0.0.0.0: gateway ::1
- add net ::0.0.0.0: gateway ::1
- add net fe80::: gateway ::1
- add net ff02::: gateway ::1
- Waiting 30s for the default route interface: .....(no carrier)
- ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat /usr/local/lib/compat/pkg /usr/local/lib/libxul /usr/local/lib/nss /usr/local/lib/qt4
- a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
- Creating and/or trimming log files.
- Starting syslogd.
- Additional ABI support: linux.
- Clearing /tmp (X related).
- Recovering vi editor sessions:.
- Removing stale Samba tdb files: ...... done
- Starting nmbd.
- Starting smbd.
- Updating motd:.
- Starting dbus.
- Starting hald.
- Configuring syscons: blanktime.
- Starting sshd.
- Starting cron.
- Local package initialization:
- ndis0: <Broadcom 802.11n Network Adapter> mem 0x56000000-0x56003fff irq 17 at device 0.0 on pci2
- ndis0: NDIS API version: 5.1
- wlan0: Ethernet address: 88:9f:fa:3a:fa:9c
- Setting the mixer vol from 75:75 to 100:100.
- Setting the mixer ogain from 50:50 to 100:100.
- .
- Starting background file system checks in 60 seconds.
- Tue Jan 3 12:35:13 JST 2012
- Jan 3 12:35:19 bsdchan login: ROOT LOGIN (root) ON ttyv0
- ndis0: link state changed to UP
- ndis0: link state changed to DOWN
- ndis0: link state changed to UP
- drm0: <Intel Pineview (M)> on vgapci0
- info: [drm] MSI enabled 1 message(s)
- info: [drm] AGP at 0x40000000 256MB
- info: [drm] Initialized i915 1.6.0 20080730
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement