U-Boot 2013.01 (Jun 12 2013 - 16:13:31), Build: jenkins-york-fsl-u-boot-119

CPU0:  T4240E, Version: 1.0, (0x82480010)
Core:  E6500, Version: 1.0, (0x80400010)
Clock Configuration:
       CPU0:1666.667 MHz, CPU1:1666.667 MHz, CPU2:1666.667 MHz, CPU3:1666.667 MHz,
       CPU4:1666.667 MHz, CPU5:1666.667 MHz, CPU6:1666.667 MHz, CPU7:1666.667 MHz,
       CPU8:1666.667 MHz, CPU9:1666.667 MHz, CPU10:1666.667 MHz, CPU11:1666.667 MHz,
       CCB:666.667 MHz,
       DDR:800  MHz (1600 MT/s data rate) (Asynchronous), IFC:166.667 MHz
       FMAN1: 444.444 MHz
       FMAN2: 333.333 MHz
       QMAN:  333.333 MHz
       PME:   333.333 MHz
L1:    D-cache 32 kB enabled
       I-cache 32 kB enabled
Reset Configuration Word (RCW):
       00000000: 14180019 0c101914 00000000 00000000
       00000010: 04383063 30548c00 1c020000 1d000000
       00000020: 00000000 ee0000ee 00000000 000307fc
       00000030: 00000000 00000000 00000000 00000020
Board: T4240QDS, Sys ID: 0x1e, Sys Ver: 0x24, vBank: 0
FPGA: v3 (T4240QDS_2012_1113_1114), build 438 on Tue Nov 13 17:14:23 2012
SERDES Reference Clocks: SERDES1=125MHz SERDES2=125MHz SERDES3=100MHz SERDES4=100MHz
I2C:   ready
SPI:   ready
DRAM:  Initializing....using SPD
Detected UDIMM 9JSF25672AZ-2G1K1
Detected UDIMM 9JSF25672AZ-2G1K1
Detected UDIMM 18KSF51272AZ-1G6K1
Not all DIMMs are identical. Memory controller interleaving disabled.
6 GiB left unmapped
    DDR: 8 GiB (DDR3, 64-bit, CL=11, ECC on)
Flash: 128 MiB
L2:    2048 KB enabled
enable l2 for cluster 1 fec60000
enable l2 for cluster 2 feca0000
Corenet Platform Cache: 1536 KB enabled
Using SERDES1 Protocol: 1 (0x1)
Using SERDES2 Protocol: 28 (0x1c)
Using SERDES3 Protocol: 6 (0x6)
Using SERDES4 Protocol: 12 (0xc)
SRIO1: enabled
SRIO2: disabled
NAND:  512 MiB
MMC:  FSL_SDHC: 0
EEPROM: CRC mismatch (752b828e != db2d5536)
PCIe1: Root Complex, no link, regs @ 0xfe240000
PCIe1: Bus 00 - 00
PCIe2: disabled
PCIe3: Root Complex, no link, regs @ 0xfe260000
PCIe3: Bus 01 - 01
PCIe4: disabled
In:    serial
Out:   serial
Err:   serial
Net:   Fman1: Uploading microcode version 106.4.6
Fman2: Uploading microcode version 106.4.6
FM1@DTSEC5, FM2@DTSEC5 [PRIME]
Hit any key to stop autoboot:  0


setenv loadaddr e8020000; setenv fdtaddr e8800000; setenv bootargs root=/dev/ram rw rootdelay=5 console=$consoledev,$baudrate; bootm $loadaddr e9300000 $fdtaddr
WARNING: adjusting available memory to 30000000
## Booting kernel from Legacy Image at e8020000 ...
   Image Name:   Linux-3.8.13-rt9-QorIQ-SDK-V1.4
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    4491674 Bytes = 4.3 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at e9300000 ...
   Image Name:   fsl-image-flash-t4240qds-2013061
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    6580185 Bytes = 6.3 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at e8800000
   Booting using the fdt blob at 0xe8800000
   Uncompressing Kernel Image ... OK
   Loading Ramdisk to 2f9b9000, end 2ffff7d9 ... OK
   Loading Device Tree to 03fdb000, end 03fffee0 ... OK
Using T4240 QDS machine description
MMU: Supported page sizes
         4 KB as direct
      1024 KB as direct
      2048 KB as direct
      4096 KB as direct
     16384 KB as direct
     65536 KB as direct
    262144 KB as direct
   1048576 KB as direct
MMU: Book3E HW tablewalk not supported
Found initrd at 0xc00000002f9b9000:0xc00000002ffff7d9
No /soc@ffe000000/qman@318000 property 'fsl,qman-fqd', using memblock_alloc(0000000000400000)
No /soc@ffe000000/qman@318000 property 'fsl,qman-pfdr', using memblock_alloc(0000000002000000)
Qman ver:0a01,03,00
No /soc@ffe000000/bman@31a000 property 'fsl,bman-fbpr', using memblock_alloc(0000000001000000)
Bman ver:0a02,02,01
pme: No /soc@ffe000000/pme@316000 property 'fsl,pme-pdsr', using memblock_alloc(0x0000000001000000)
pme: No /soc@ffe000000/pme@316000 property 'fsl,pme-sre', using memblock_alloc(0x0000000000a00000)
No USDPAA memory, no 'usdpaa_mem' bootarg
bootconsole [udbg0] enabled
CPU maps initialized for 2 threads per core
Starting Linux PPC64 #1 SMP Sat Jun 15 00:03:34 CDT 2013
-----------------------------------------------------
ppc64_pft_size                = 0x0
physicalMemorySize            = 0x200000000
ppc64_caches.dcache_line_size = 0x40
ppc64_caches.icache_line_size = 0x40
-----------------------------------------------------
Linux version 3.8.13-rt9-QorIQ-SDK-V1.4 (jenkins@topsy) (gcc version 4.7.2 (GCC) ) #1 SMP Sat Jun 15 00:03:34 CDT 2013
CF000012

Setup Arch
[boot]0012 Setup Arch
T4240 QDS board from Freescale Semiconductor
Zone ranges:
  DMA      [mem 0x00000000-0x7fffffff]
  Normal   [mem 0x80000000-0x1ffffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x1ffffffff]
MMU: Allocated 2112 bytes of context maps for 255 contexts
CF000015

Setup Done
[boot]0015 Setup Done
PERCPU: Embedded 14 pages/cpu @c00000000b100000 s24832 r0 d32512 u65536
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2068480
Kernel command line: root=/dev/ram rw rootdelay=5 console=ttyS0,115200
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Memory: 8093172k/8388608k available (10028k kernel code, 295436k reserved, 1016k data, 843k bss, 332k init)
Hierarchical RCU implementation.
	RCU debugfs-based tracing is enabled.
	CONFIG_RCU_FANOUT set to non-default value of 32
NR_IRQS:512 nr_irqs:512 16
mpic: Setting up MPIC " OpenPIC  " version 1.2 at ffe040000, max 24 CPUs
mpic: ISU size: 512, shift: 9, mask: 1ff
mpic: Initializing for 512 sources
clocksource: timebase mult[18000006] shift[24] registered
Console: colour dummy device 80x25
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
mpic: requesting IPIs...
e6500 family performance monitor hardware support registered
Brought up 24 CPUs
devtmpfs: initialized
xor: measuring software checksum speed
   8regs     :  3410.000 MB/sec
   8regs_prefetch:  2991.000 MB/sec
   32regs    :  3421.000 MB/sec
   32regs_prefetch:  3080.000 MB/sec
xor: using function: 32regs (3421.000 MB/sec)
NET: Registered protocol family 16
Found FSL PCI host bridge at 0x0000000ffe240000. Firmware bus number: 0->0
PCI host bridge /pcie@ffe240000 (primary) ranges:
 MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000
  IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000
/pcie@ffe240000: PCICSRBAR @ 0xdf000000
/pcie@ffe240000: Setup 64-bit PCI DMA window
/pcie@ffe240000: DMA window size is 0xdf000000
EDAC PCI0: Giving out device to module 'MPC85xx_edac' controller 'mpc85xx_pci_err': DEV 'ffe240000.pcie' (INTERRUPT)
MPC85xx_edac acquired irq 20 for PCI Err
MPC85xx_edac PCI err registered
Found FSL PCI host bridge at 0x0000000ffe260000. Firmware bus number: 0->0
PCI host bridge /pcie@ffe260000  ranges:
 MEM 0x0000000c40000000..0x0000000c5fffffff -> 0x00000000e0000000
  IO 0x0000000ff8020000..0x0000000ff802ffff -> 0x0000000000000000
/pcie@ffe260000: PCICSRBAR @ 0xdf000000
/pcie@ffe260000: Setup 64-bit PCI DMA window
/pcie@ffe260000: DMA window size is 0xdf000000
EDAC PCI1: Giving out device to module 'MPC85xx_edac' controller 'mpc85xx_pci_err': DEV 'ffe260000.pcie' (INTERRUPT)
MPC85xx_edac acquired irq 22 for PCI Err
MPC85xx_edac PCI err registered
software IO TLB [mem 0x0be7e000-0x0fe7e000] (64MB) mapped at [c00000000be7e000-c00000000fe7dfff]
PCI: Probing PCI hardware
fsl-pci ffe240000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x10000-0x1ffff] (bus address [0x0000-0xffff])
pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff])
pci_bus 0000:00: root bus resource [bus 00]
pci 0000:00:00.0: ignoring class 0x0b2000 (doesn't match header type 01)
pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
fsl-pci ffe260000.pcie: PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [io  0x21000-0x30fff] (bus address [0x0000-0xffff])
pci_bus 0001:00: root bus resource [mem 0xc40000000-0xc5fffffff] (bus address [0xe0000000-0xffffffff])
pci_bus 0001:00: root bus resource [bus 00]
pci 0001:00:00.0: ignoring class 0x0b2000 (doesn't match header type 01)
pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0001:00:00.0: PCI bridge to [bus 01-ff]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0:   bridge window [io  0x10000-0x1ffff]
pci 0000:00:00.0:   bridge window [mem 0xc00000000-0xc1fffffff]
pci 0001:00:00.0: PCI bridge to [bus 01]
pci 0001:00:00.0:   bridge window [io  0x21000-0x30fff]
pci 0001:00:00.0:   bridge window [mem 0xc40000000-0xc5fffffff]
bio: create slab <bio-0> at 0
raid6: altivecx1  1462 MB/s
raid6: altivecx2  1820 MB/s
raid6: altivecx4  2757 MB/s
raid6: altivecx8  2873 MB/s
raid6: int64x1    480 MB/s
raid6: int64x2    833 MB/s
raid6: int64x4   1221 MB/s
raid6: int64x8   1160 MB/s
raid6: using algorithm altivecx8 (2873 MB/s)
raid6: using intx1 recovery algorithm
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Bman err interrupt handler present
Bman portal initialised, cpu 0
Bman portal initialised, cpu 1
Bman portal initialised, cpu 2
Bman portal initialised, cpu 3
Bman portal initialised, cpu 4
Bman portal initialised, cpu 5
Bman portal initialised, cpu 6
Bman portal initialised, cpu 7
Bman portal initialised, cpu 8
Bman portal initialised, cpu 9
Bman portal initialised, cpu 10
Bman portal initialised, cpu 11
Bman portal initialised, cpu 12
Bman portal initialised, cpu 13
Bman portal initialised, cpu 14
Bman portal initialised, cpu 15
Bman portal initialised, cpu 16
Bman portal initialised, cpu 17
Bman portal initialised, cpu 18
Bman portal initialised, cpu 19
Bman portal initialised, cpu 20
Bman portal initialised, cpu 21
Bman portal initialised, cpu 22
Bman portal initialised, cpu 23
Bman portals initialised
Bman: BPID allocator includes range 32:32
Qman err interrupt handler present
QMan: Allocated lookup table at 8000000000000000, entry count 65537
Qman portal initialised, cpu 0
Qman portal initialised, cpu 1
Qman portal initialised, cpu 2
Qman portal initialised, cpu 3
Qman portal initialised, cpu 4
Qman portal initialised, cpu 5
Qman portal initialised, cpu 6
Qman portal initialised, cpu 7
Qman portal initialised, cpu 8
Qman portal initialised, cpu 9
Qman portal initialised, cpu 10
Qman portal initialised, cpu 11
Qman portal initialised, cpu 12
Qman portal initialised, cpu 13
Qman portal initialised, cpu 14
Qman portal initialised, cpu 15
Qman portal initialised, cpu 16
Qman portal initialised, cpu 17
Qman portal initialised, cpu 18
Qman portal initialised, cpu 19
Qman portal initialised, cpu 20
Qman portal initialised, cpu 21
Qman portal initialised, cpu 22
Qman portal initialised, cpu 23
Qman portals initialised
Qman: FQID allocator includes range 256:512
Qman: FQID allocator includes range 32768:32768
Qman: CGRID allocator includes range 0:256
Qman: pool channel allocator includes range 1025:15
Switching to clocksource timebase
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6428k freed
fsl-ifc ffe124000.localbus: Freescale Integrated Flash Controller
audit: initializing netlink socket (disabled)
type=2000 audit(1.392:1): initialized
HugeTLB registered 1 MB page size, pre-allocated 0 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
HugeTLB registered 16 MB page size, pre-allocated 0 pages
HugeTLB registered 64 MB page size, pre-allocated 0 pages
HugeTLB registered 256 MB page size, pre-allocated 0 pages
HugeTLB registered 1 GB page size, pre-allocated 0 pages
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
NTFS driver 2.1.30 [Flags: R/O].
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 15819
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36) is a 16550A
serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37) is a 16550A
serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37) is a 16550A
ePAPR hypervisor byte channel driver
brd: module loaded
loop: module loaded
st: Version 20101219, fixed bufsize 32768, s/g segs 256
fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
scsi0 : sata_fsl
ata1: SATA max UDMA/133 irq 68
fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
scsi1 : sata_fsl
ata2: SATA max UDMA/133 irq 69
fe8000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002801
ata1: Signature Update detected @ 0 msecs
Amd/Fujitsu Extended Query Table at 0x0040
  Amd/Fujitsu Extended Query version 1.5.
number of CFI chips: 1
ONFI param page 0 valid
ONFI flash detected
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xac (Micron MT29F4G08ABBDAH4), 512MiB, page size: 2048, OOB size: 64
Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
4 ofpart partitions found on MTD device ff800000.flash
Creating 4 MTD partitions on "ff800000.flash":
0x000000000000-0x000000100000 : "NAND U-Boot Image"
0x000000100000-0x000000200000 : "NAND DTB Image"
0x000000200000-0x000000c00000 : "NAND Linux Kernel Image"
0x000000c00000-0x000020000000 : "NAND RFS Image"
fsl,ifc-nand fff800000.nand: IFC NAND device at 0xfff800000, bank 2
fsl_espi ffe110000.spi: master is unqueued, this is deprecated
m25p80 spi32766.0: sst25wf040 (512 Kbytes)
fsl_espi ffe110000.spi: at 0x80000800803be000 (irq = 53)
libphy: Fixed MDIO Bus: probed
mdio-mux-mmioreg fffdf0054.mdio-mux-emi1: failed to register mdio-mux bus /localbus@ffe124000/board-control@3,0/mdio-mux-emi1
platform fffdf0054.mdio-mux-emi1: Driver mdio-mux-mmioreg requests probe deferral
libphy: Freescale XGMAC MDIO Bus: probed
libphy: Freescale XGMAC MDIO Bus: probed
mdio_bus ffe5fd000: MDIO read error
mdio_bus ffe5fd000: MDIO read error
mdio_bus ffe5fd000: MDIO read error
mdio_bus ffe5fd000: MDIO read error
mdio_bus ffe5fd000: MDIO read error
mdio_bus ffe5fd000: MDIO read error
mdio_bus ffe5fd000: MDIO read error
mdio_bus ffe5fd000: MDIO read error
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD3200BPVT-24JJ5T0, 01.01A01, max UDMA/133
Freescale FM module (Jun 15 2013:00:02:55), FMD API version 21.1.0
ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 16/32)
Freescale FM Ports module (Jun 15 2013:00:02:59)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
 sda: sda1
dpaa_debugfs: FSL DPAA Ethernet debugfs entries ()
fsl_mac: mac.c:417:mac_load() fsl_mac: FSL FMan MAC API based driver ()
fsl_mac ffe4e0000.ethernet: FMan MEMAC
fsl_mac ffe4e0000.ethernet: FMan MAC address: 00:e0:0c:00:ae:00
fsl_mac ffe4e8000.ethernet: FMan MEMAC
fsl_mac ffe4e8000.ethernet: FMan MAC address: 00:04:9f:02:e5:9f
fsl_mac ffe5e8000.ethernet: FMan MEMAC
fsl_mac ffe5e8000.ethernet: FMan MAC address: 00:04:9f:02:e5:a7
fsl_dpa: dpaa_eth.c:4320:dpa_load() fsl_dpa: FSL DPAA Ethernet driver ()
fsl_dpa ethernet.16: Using private BM buffer pools
fsl_dpa: dpaa_eth.c:3715:dpa_rx_fq_init() Using dynamic RX QM frame queues
fsl_dpa: dpaa_eth.c:3739:dpa_tx_fq_init() Using dynamic TX QM frame queues
fsl_dpa ethernet.17: Using private BM buffer pools
fsl_dpa: dpaa_eth.c:3715:dpa_rx_fq_init() Using dynamic RX QM frame queues
fsl_dpa: dpaa_eth.c:3739:dpa_tx_fq_init() Using dynamic TX QM frame queues
fsl_oh: offline_port.c:439:oh_port_load() fsl_oh: FSL FMan Offline Parsing port driver ()
e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
mpc-i2c ffe118000.i2c: timeout 1000000 us
rtc-ds3232 0-0068: rtc core: registered ds3232 as rtc0
mpc-i2c ffe118100.i2c: timeout 1000000 us
mpc-i2c ffe119000.i2c: timeout 1000000 us
mpc-i2c ffe119100.i2c: timeout 1000000 us
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
EDAC MC: Ver: 3.0.0
Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software
EDAC MC0: Giving out device to 'MPC85xx_edac' 'mpc85xx_mc_err': DEV mpc85xx_mc_err
MPC85xx_edac acquired irq 490 for MC
MPC85xx_edac MC err registered
EDAC MC1: Giving out device to 'MPC85xx_edac' 'mpc85xx_mc_err': DEV mpc85xx_mc_err
MPC85xx_edac acquired irq 489 for MC
MPC85xx_edac MC err registered
EDAC MC2: Giving out device to 'MPC85xx_edac' 'mpc85xx_mc_err': DEV mpc85xx_mc_err
MPC85xx_edac acquired irq 488 for MC
MPC85xx_edac MC err registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using DMA
platform caam_qi.0: Linux CAAM Queue I/F driver initialised
caam ffe300000.crypto: device ID = 0x0a1c010000000000 (Era -524)
caam ffe300000.crypto: job rings = 4, qi = 1
caam ffe300000.crypto: fsl,sec-v5.0 algorithms registered in /proc/crypto
platform ffe301000.jr: registering rng-caam
platform caam_qi.0: fsl,sec-v5.0 algorithms registered in /proc/crypto
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Freescale USDPAA process driver
fsl-usdpaa: no region found
Freescale USDPAA process IRQ driver
fsl-pme ffe316000.pme: ver: 0x00100201
mmc0: new high speed SDHC card at address aaaa
mmcblk0: mmc0:aaaa SU04G 3.69 GiB
 mmcblk0: p1
ata2: No Device OR PHYRDY change,Hstatus = 0xa0000000
ata2: SATA link down (SStatus 0 SControl 300)
Freescale pme2 db driver
sd 0:0:0:0: [sda] Attached SCSI disk
Freescale pme2 scan driver
fsl-pme2-scan: device pme_scan registered
fsl-of-rman ffe1e0000.rman: Of-device /soc@ffe000000/rman@1e0000 initialized
fsl-of-rman ffe1e0000.rman: RMan inbound block0 initialized.
fsl-of-rman ffe1e0000.rman: RMan inbound block1 initialized.
fsl-of-rman ffe1e0000.rman: RMan inbound block2 initialized.
fsl-of-rman ffe1e0000.rman: RMan inbound block3 initialized.
Freescale hypervisor management driver
fsl-hv: no hypervisor found
IPv4 over IPv4 tunneling driver
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
libphy: mdio_mux: probed
mdio-mux-mmioreg fffdf0054.mdio-mux-emi1: Version 1.0
rtc-ds3232 0-0068: setting system clock to 2014-03-11 09:09:29 UTC (1394528969)
Waiting 5sec before mounting root device...
md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
RAMDISK: gzip image found at block 0
VFS: Mounted root (ext2 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 332k freed

INIT: version 2.88 booting Starting udev
udevd[1312]: starting version 182
EXT2-fs (mmcblk0): error: ext2_check_descriptors: Block bitmap for group 0 not in group (block 1437226410)!
EXT2-fs (mmcblk0): group descriptors corrupted
EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory
bootlogd.
Configuring network interfaces... done.
Running postinst /etc/rpm-postinsts/sysvinit-inittab...

INIT: Entering runlevel: 5 Starting Dropbear SSH server: Will output 1024 bit rsa secret key to '/etc/dropbear/dropbear_rsa_host_key'
Generating key, this may take a while...
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgwCwiNTRhYLI9QvaIhVB3HuNMCWUn3CNIoKCyz6MwDc2WqqZBotyCzVu0yeMDMc/KNMsf8FI8GasJE/WEar5sxeQau67Cr5wCvYlgkOEwdaM9zxADN3CBlNr21F5h6aUe0wxg9YncVjtGpsj1r2Ql6d1LrfsbL5uA4diy/ffeywWYZop root@t4240qds
Fingerprint: md5 32:88:48:99:9f:54:1a:dd:6e:0d:f0:f6:12:61:8a:1d
dropbear.
Starting system log daemon...0
Starting kernel log daemon...0
Stopping Bootlog daemon: bootlogd.

Poky 9.0 (Yocto Project 1.4 Reference Distro) 1.4 t4240qds ttyS0

t4240qds login: