FreeBSD 10.2 Dmsg Output after crash

Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.2-RELEASE #0 r286666: Wed Aug 12 15:26:37 UTC 2015
    [email protected]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Xeon(R) CPU E5-2609 v3 @ 1.90GHz (1897.84-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306f2  Family=0x6  Model=0x3f  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8107782144 (7732 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  2
 cpu2 (AP): APIC ID:  4
 cpu3 (AP): APIC ID:  6
 cpu4 (AP): APIC ID:  8
 cpu5 (AP): APIC ID: 10
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci255: <ACPI PCI bus> on pcib0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci9: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 1.1 on pci0
pci15: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 2.1 on pci0
pci3: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 2.2 on pci0
pci4: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 2.3 on pci0
pci5: <ACPI PCI bus> on pcib7
igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0x3020-0x303f mem 0x92e00000-0x92efffff,0x92f04000-0x92f07fff irq 32 at device 0.0 on pci5
igb0: Using MSIX interrupts with 7 vectors
igb0: Ethernet address: 9c:b6:54:b2:61:d8
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: Bound queue 4 to cpu 4
igb0: Bound queue 5 to cpu 5
igb1: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0x3000-0x301f mem 0x92d00000-0x92dfffff,0x92f00000-0x92f03fff irq 36 at device 0.1 on pci5
igb1: Using MSIX interrupts with 7 vectors
igb1: Ethernet address: 9c:b6:54:b2:61:d9
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
igb1: Bound queue 2 to cpu 2
igb1: Bound queue 3 to cpu 3
igb1: Bound queue 4 to cpu 4
igb1: Bound queue 5 to cpu 5
pcib8: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci6: <ACPI PCI bus> on pcib8
ciss0: <HP Smart Array TBD> port 0x2000-0x20ff mem 0x92b00000-0x92bfffff,0x92c00000-0x92c003ff irq 16 at device 0.0 on pci6
ciss0: PERFORMANT Transport
pcib9: <ACPI PCI-PCI bridge> at device 3.1 on pci0
pci16: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 3.2 on pci0
pci12: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 3.3 on pci0
pci17: <ACPI PCI bus> on pcib11
pci0: <unknown> at device 17.0 (no driver attached)
xhci0: <XHCI (generic) USB 3.0 controller> mem 0x39ffff00000-0x39ffff0ffff irq 19 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0x93001000-0x930013ff irq 18 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
pcib12: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci18: <ACPI PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci1: <ACPI PCI bus> on pcib13
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92a88000-0x92a8bfff,0x92000000-0x927fffff irq 19 at device 0.1 on pci1
vgapci0: Boot video device
uhci0: <UHCI (generic) USB controller> port 0x1300-0x131f irq 19 at device 0.4 on pci1
usbus2 on uhci0
pcib14: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci19: <ACPI PCI bus> on pcib14
pcib15: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci20: <ACPI PCI bus> on pcib15
pcib16: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci21: <ACPI PCI bus> on pcib16
ehci1: <EHCI (generic) USB 2.0 controller> mem 0x93000000-0x930003ff irq 18 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 154700000c00
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 154700000c00
device_attach: est1 attach returned 6
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 154700000c00
device_attach: est2 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 154700000c00
device_attach: est3 attach returned 6
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 154700000c00
device_attach: est4 attach returned 6
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 154700000c00
device_attach: est5 attach returned 6
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
Timecounters tick every 1.000 msec
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen3.1: <Intel> at usbus3
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <0x103c> at usbus2
uhub2: <0x103c UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Intel> at usbus1
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <HP RAID 5 OK> Fixed Direct Access SPC-3 SCSI device
da0: Serial Number PDNNK0ARH6V0HD
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 2002490MB (4101100124 512 byte sectors: 255H 32S/T 65535C)
lapic8: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic10: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
Timecounter "TSC" frequency 1897842335 Hz quality 1000
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
Root mount waiting for: usbus3 usbus1 usbus0
ugen0.2: <vendor 0x0424> at usbus0
uhub4: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 1> on usbus0
ugen3.2: <vendor 0x8087> at usbus3
uhub5: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus3
ugen1.2: <vendor 0x8087> at usbus1
uhub6: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
uhub4: 2 ports with 1 removable, self powered
uhub6: 6 ports with 6 removable, self powered
uhub5: 8 ports with 8 removable, self powered
ugen0.3: <Apple Inc.> at usbus0
uhub7: <Apple Inc. Keyboard Hub, class 9/0, rev 2.00/96.15, addr 2> on usbus0
Root mount waiting for: usbus0
uhub7: 3 ports with 2 removable, bus powered
ugen0.4: <Apple Inc.> at usbus0
ukbd0: <Apple Inc. Apple Keyboard, class 0/0, rev 2.00/0.70, addr 3> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.5: <Logitech> at usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.6: <Western Digital> at usbus0
umass0: <Western Digital My Book 25DA, class 0/0, rev 3.00/30.02, addr 5> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0xc001
umass0:2:0:-1: Attached to scbus2
Trying to mount root from ufs:/dev/da0p2 [rw]...
WARNING: / was not properly dismounted
WARNING: /: mount pending error: blocks 0 files 26
da1 at umass-sim0 bus 0 scbus2 target 0 lun 0
da1: <WD My Book 25DA 3002> Fixed Direct Access SPC-4 SCSI device
da1: Serial Number 564B4A4D44554758
da1: 400.000MB/s transfers
da1: 7630885MB (15628052480 512 byte sectors: 255H 63S/T 972801C)
da1: quirks=0x2<NO_6_BYTE>
ses0 at umass-sim0 bus 0 scbus2 target 0 lun 1
ses0: <WD SES Device 3002> Fixed Enclosure Services SPC-4 SCSI device
ses0: Serial Number 564B4A4D44554758
ses0: 400.000MB/s transfers
ses0: SCSI-3 ENC Device
WARNING: /mnt/USBBD was not properly dismounted
uhid0: <Apple Inc. Apple Keyboard, class 0/0, rev 2.00/0.70, addr 3> on usbus0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 4> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
g_vfs_done():da1p1[READ(offset=1443658792960, length=32768)]error = 16