API tools faq
paste
Advertisement
Guest User

ser

a guest
Apr 7th, 2012
38
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 22.14 KB | None | 0 0
raw download clone embed print report
  1. SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
  2. Slot #7, PowerLimit 0.000W; Interlock- NoCompl+
  3. SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
  4. Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  5. SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
  6. Changed: MRL- PresDet- LinkState-
  7. RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  8. RootCap: CRSVisible-
  9. RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  10. DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
  11. DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
  12. LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
  13. Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  14. Compliance De-emphasis: -6dB
  15. LnkSta2: Current De-emphasis Level: -6dB
  16. Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
  17. Address: fee0300c Data: 4159
  18. Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 1475
  19. Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
  20. Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
  21. Capabilities: [110 v1] Virtual Channel
  22. Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  23. Arb: Fixed- WRR32- WRR64- WRR128-
  24. Ctrl: ArbSelect=Fixed
  25. Status: InProgress-
  26. VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  27. Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
  28. Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
  29. Status: NegoPending- InProgress-
  30. Kernel driver in use: pcieport
  31. Kernel modules: shpchp
  32.  
  33. 00:09.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 4) (prog-if 00 [Normal decode])
  34. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  35. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  36. Latency: 0, Cache Line Size: 64 bytes
  37. Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
  38. Memory behind bridge: d2100000-d21fffff
  39. Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  40. BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  41. PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  42. Capabilities: [50] Power Management version 3
  43. Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  44. Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  45. Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
  46. DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
  47. ExtTag+ RBE+ FLReset-
  48. DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  49. RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  50. MaxPayload 128 bytes, MaxReadReq 128 bytes
  51. DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  52. LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
  53. ClockPM- Surprise- LLActRep+ BwNot+
  54. LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
  55. ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  56. LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
  57. SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
  58. Slot #9, PowerLimit 0.000W; Interlock- NoCompl+
  59. SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
  60. Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  61. SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
  62. Changed: MRL- PresDet+ LinkState+
  63. RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  64. RootCap: CRSVisible-
  65. RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  66. DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
  67. DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
  68. LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
  69. Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  70. Compliance De-emphasis: -6dB
  71. LnkSta2: Current De-emphasis Level: -6dB
  72. Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
  73. Address: fee0300c Data: 4161
  74. Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 1475
  75. Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
  76. Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
  77. Capabilities: [110 v1] Virtual Channel
  78. Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  79. Arb: Fixed- WRR32- WRR64- WRR128-
  80. Ctrl: ArbSelect=Fixed
  81. Status: InProgress-
  82. VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  83. Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
  84. Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
  85. Status: NegoPending- InProgress-
  86. Kernel driver in use: pcieport
  87. Kernel modules: shpchp
  88.  
  89. 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (prog-if 01 [AHCI 1.0])
  90. Subsystem: Hewlett-Packard Company Device 1475
  91. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  92. Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  93. Latency: 64, Cache Line Size: 64 bytes
  94. Interrupt: pin A routed to IRQ 19
  95. Region 0: I/O ports at 6018 [size=8]
  96. Region 1: I/O ports at 6024 [size=4]
  97. Region 2: I/O ports at 6010 [size=8]
  98. Region 3: I/O ports at 6020 [size=4]
  99. Region 4: I/O ports at 6000 [size=16]
  100. Region 5: Memory at d440b000 (32-bit, non-prefetchable) [size=1K]
  101. Capabilities: [70] SATA HBA v1.0 InCfgSpace
  102. Capabilities: [a4] PCI Advanced Features
  103. AFCap: TP+ FLR+
  104. AFCtrl: FLR-
  105. AFStatus: TP-
  106. Kernel driver in use: ahci
  107. Kernel modules: ahci
  108.  
  109. 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
  110. Subsystem: Hewlett-Packard Company Device 1475
  111. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  112. Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  113. Latency: 64, Cache Line Size: 64 bytes
  114. Interrupt: pin A routed to IRQ 18
  115. Region 0: Memory at d440a000 (32-bit, non-prefetchable) [size=4K]
  116. Kernel driver in use: ohci_hcd
  117.  
  118. 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
  119. Subsystem: Hewlett-Packard Company Device 1475
  120. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  121. Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  122. Latency: 64, Cache Line Size: 64 bytes
  123. Interrupt: pin B routed to IRQ 17
  124. Region 0: Memory at d4409000 (32-bit, non-prefetchable) [size=256]
  125. Capabilities: [c0] Power Management version 2
  126. Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
  127. Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  128. Bridge: PM- B3+
  129. Capabilities: [e4] Debug port: BAR=1 offset=00e0
  130. Kernel driver in use: ehci_hcd
  131.  
  132. 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
  133. Subsystem: Hewlett-Packard Company Device 1475
  134. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  135. Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  136. Latency: 64, Cache Line Size: 64 bytes
  137. Interrupt: pin A routed to IRQ 18
  138. Region 0: Memory at d4408000 (32-bit, non-prefetchable) [size=4K]
  139. Kernel driver in use: ohci_hcd
  140.  
  141. 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
  142. Subsystem: Hewlett-Packard Company Device 1475
  143. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  144. Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  145. Latency: 64, Cache Line Size: 64 bytes
  146. Interrupt: pin B routed to IRQ 17
  147. Region 0: Memory at d4407000 (32-bit, non-prefetchable) [size=256]
  148. Capabilities: [c0] Power Management version 2
  149. Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
  150. Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  151. Bridge: PM- B3+
  152. Capabilities: [e4] Debug port: BAR=1 offset=00e0
  153. Kernel driver in use: ehci_hcd
  154.  
  155. 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)
  156. Subsystem: Hewlett-Packard Company Device 1475
  157. Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  158. Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  159. Kernel modules: sp5100_tco, i2c-piix4
  160.  
  161. 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
  162. Subsystem: Hewlett-Packard Company Device 1475
  163. Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  164. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  165. Latency: 64, Cache Line Size: 32 bytes
  166. Interrupt: pin ? routed to IRQ 16
  167. Region 0: Memory at d4400000 (64-bit, non-prefetchable) [size=16K]
  168. Capabilities: [50] Power Management version 2
  169. Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  170. Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  171. Kernel driver in use: HDA Intel
  172. Kernel modules: snd-hda-intel
  173.  
  174. 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
  175. Subsystem: Hewlett-Packard Company Device 1475
  176. Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  177. Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  178. Latency: 0
  179.  
  180. 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
  181. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  182. Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  183. Latency: 64
  184. Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
  185. I/O behind bridge: 00001000-00001fff
  186. Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  187. BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  188. PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  189.  
  190. 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
  191. Subsystem: Hewlett-Packard Company Device 1475
  192. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  193. Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  194. Latency: 64, Cache Line Size: 64 bytes
  195. Interrupt: pin C routed to IRQ 18
  196. Region 0: Memory at d4406000 (32-bit, non-prefetchable) [size=4K]
  197. Kernel driver in use: ohci_hcd
  198.  
  199. 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
  200. Subsystem: Hewlett-Packard Company Device 1475
  201. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  202. Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  203. Latency: 64, Cache Line Size: 64 bytes
  204. Interrupt: pin A routed to IRQ 18
  205. Region 0: Memory at d4405000 (32-bit, non-prefetchable) [size=4K]
  206. Kernel driver in use: ohci_hcd
  207.  
  208. 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
  209. Subsystem: Hewlett-Packard Company Device 1475
  210. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  211. Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  212. Latency: 64, Cache Line Size: 64 bytes
  213. Interrupt: pin B routed to IRQ 17
  214. Region 0: Memory at d4404000 (32-bit, non-prefetchable) [size=256]
  215. Capabilities: [c0] Power Management version 2
  216. Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
  217. Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  218. Bridge: PM- B3+
  219. Capabilities: [e4] Debug port: BAR=1 offset=00e0
  220. Kernel driver in use: ehci_hcd
  221.  
  222. 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
  223. Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  224. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  225. Capabilities: [80] HyperTransport: Host or Secondary Interface
  226. Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
  227. Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b+
  228. Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
  229. Revision ID: 3.00
  230. Link Frequency: 1.6GHz
  231. Link Error: <Prot- <Ovfl- <EOC- CTLTm-
  232. Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
  233. Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
  234.  
  235. 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
  236. Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  237. Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  238.  
  239. 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
  240. Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  241. Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  242.  
  243. 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
  244. Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  245. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  246. Capabilities: [f0] Secure device <?>
  247. Kernel driver in use: k10temp
  248. Kernel modules: k10temp
  249.  
  250. 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
  251. Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  252. Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  253.  
  254. 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] (prog-if 00 [VGA controller])
  255. Subsystem: Hewlett-Packard Company Device 1475
  256. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  257. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  258. Latency: 0, Cache Line Size: 64 bytes
  259. Interrupt: pin A routed to IRQ 18
  260. Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
  261. Region 1: I/O ports at 5000 [size=256]
  262. Region 2: Memory at d4300000 (32-bit, non-prefetchable) [size=64K]
  263. Region 5: Memory at d4200000 (32-bit, non-prefetchable) [size=1M]
  264. Expansion ROM at <unassigned> [disabled]
  265. Capabilities: [50] Power Management version 3
  266. Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  267. Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  268. Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
  269. Address: 0000000000000000 Data: 0000
  270. Kernel driver in use: radeon
  271. Kernel modules: radeon
  272.  
  273. 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200]
  274. Subsystem: Hewlett-Packard Company Device 1475
  275. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  276. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  277. Latency: 0, Cache Line Size: 64 bytes
  278. Interrupt: pin B routed to IRQ 19
  279. Region 0: Memory at d4310000 (32-bit, non-prefetchable) [size=16K]
  280. Capabilities: [50] Power Management version 3
  281. Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  282. Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  283. Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
  284. Address: 0000000000000000 Data: 0000
  285. Kernel driver in use: HDA Intel
  286. Kernel modules: snd-hda-intel
  287.  
  288. 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
  289. Subsystem: Hewlett-Packard Company Device 1475
  290. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  291. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  292. Latency: 0, Cache Line Size: 64 bytes
  293. Interrupt: pin A routed to IRQ 43
  294. Region 0: I/O ports at 3000 [size=256]
  295. Region 2: Memory at d0010000 (64-bit, prefetchable) [size=4K]
  296. Region 4: Memory at d0000000 (64-bit, prefetchable) [size=64K]
  297. Expansion ROM at d0020000 [disabled] [size=128K]
  298. Capabilities: [40] Power Management version 3
  299. Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  300. Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  301. Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
  302. Address: 00000000fee0100c Data: 4171
  303. Capabilities: [70] Express (v2) Endpoint, MSI 01
  304. DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
  305. ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
  306. DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  307. RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
  308. MaxPayload 128 bytes, MaxReadReq 4096 bytes
  309. DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
  310. LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
  311. ClockPM+ Surprise- LLActRep- BwNot-
  312. LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
  313. ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  314. LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  315. DevCap2: Completion Timeout: Not Supported, TimeoutDis+
  316. DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
  317. LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
  318. Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  319. Compliance De-emphasis: -6dB
  320. LnkSta2: Current De-emphasis Level: -6dB
  321. Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
  322. Vector table: BAR=4 offset=00000000
  323. PBA: BAR=4 offset=00000800
  324. Capabilities: [cc] Vital Product Data
  325. Unknown small resource type 00, will not decode more.
  326. Capabilities: [100 v1] Advanced Error Reporting
  327. UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  328. UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  329. UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  330. CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  331. CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  332. AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
  333. Capabilities: [140 v1] Virtual Channel
  334. Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  335. Arb: Fixed- WRR32- WRR64- WRR128-
  336. Ctrl: ArbSelect=Fixed
  337. Status: InProgress-
  338. VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  339. Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  340. Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
  341. Status: NegoPending- InProgress-
  342. Capabilities: [160 v1] Device Serial Number 01-00-00-00-ff-ff-00-00
  343. Kernel driver in use: r8169
  344. Kernel modules: r8169
  345.  
  346. 06:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
  347. Subsystem: Hewlett-Packard Company Device 1483
  348. Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  349. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  350. Latency: 0, Cache Line Size: 64 bytes
  351. Interrupt: pin A routed to IRQ 17
  352. Region 0: Memory at d2100000 (64-bit, non-prefetchable) [size=16K]
  353. Capabilities: [40] Power Management version 3
  354. Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  355. Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
  356. Capabilities: [58] Vendor Specific Information: Len=78 <?>
  357. Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
  358. Address: 0000000000000000 Data: 0000
  359. Capabilities: [d0] Express (v1) Endpoint, MSI 00
  360. DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
  361. ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
  362. DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  363. RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  364. MaxPayload 128 bytes, MaxReadReq 128 bytes
  365. DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
  366. LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
  367. ClockPM+ Surprise- LLActRep+ BwNot-
  368. LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
  369. ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  370. LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
  371. Capabilities: [100 v1] Advanced Error Reporting
  372. UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  373. UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  374. UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  375. CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  376. CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  377. AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
  378. Capabilities: [13c v1] Virtual Channel
  379. Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  380. Arb: Fixed- WRR32- WRR64- WRR128-
  381. Ctrl: ArbSelect=Fixed
  382. Status: InProgress-
  383. VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  384. Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  385. Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
  386. Status: NegoPending- InProgress-
  387. Capabilities: [160 v1] Device Serial Number 00-00-82-ff-ff-42-e0-2a
  388. Capabilities: [16c v1] Power Budgeting <?>
  389. Kernel driver in use: wl
  390. Kernel modules: wl, brcm80211
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!