This week only. Pastebin PRO Accounts Christmas Special! Don't miss out!Want more features on Pastebin? Sign Up, it's FREE!
Guest

Untitled

By: a guest on Aug 21st, 2011  |  syntax: None  |  size: 23.69 KB  |  views: 243  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. Board: STx7105-PDK  [32-bit mode]
  2.  
  3.  
  4. U-Boot 1.3.1 (Nov 10 2010 - 10:23:47) - stm23_0045
  5.  
  6. DRAM:  256 MiB
  7. SPI: ST M25P80 (1MiB) device (page=256,erase=4096)
  8. In:    serial
  9. Out:   serial
  10. Err:   serial
  11. Svn Version: 5804
  12. [uboot_gb620]:update flag = 1
  13. [uboot_gb620]:P/N flag = 2
  14. [uboot_gb620]:NTSC...
  15. (Re)start USB...
  16. USB:   scanning bus for devices... 2 USB Device(s) found
  17.        scanning bus for storage devices... 1 Storage Device(s) found
  18. Hit any key to stop autoboot:  0
  19. ....
  20. .....................................................................................................................................................................................................................
  21.  
  22. 2231572 bytes read
  23. Booting image at 80000000 ...
  24.    Image Name:   Linux 2.6.23.17_stm23_0123
  25.    Image Type:   SuperH Linux Kernel Image (gzip compressed)
  26.    Data Size:    2231508 Bytes =   2.1 MiB
  27.    Load Address: 80800000
  28.    Entry Point:  80801000
  29.    Verifying Checksum ... OK
  30.    Uncompressing Kernel Image ... OK
  31. CMDLen=169
  32. There is  "hwaddr" keywords! Position=95
  33. Read MacAddr=24cf21b10495
  34.  
  35. [iptv_kernel]:Starting kernel console=ttyAS0,115200 root=8:2  rootfstype=ext3 rw rootflags=data=journal nwhwconf=device:eth0,hwaddr:24:cf:21:b1:04:95 phyaddr:0,watchdog:5000 mem=120M bigphysarea=2048 - 0x00000000 - 0 ...
  36.  
  37. Linux version 2.6.23.17_stm23_0123 (Judith@Judith) (gcc version 4.3.4 20091123 (STMicroelectronics/Linux Base) ) #13 PREEMPT Fri Jul 29 16:10:39 CST 2011
  38. Booting machvec: pdk7105
  39. Node 0: start_pfn = 0x40000, low = 0x47800
  40. Zone PFN ranges:
  41.   Normal     262144 ->   292864
  42. Movable zone start PFN for each node
  43. early_node_map[1] active PFN ranges
  44.     0:   262144 ->   292864
  45. STMicroelectronics PDK7105-SDK board initialisation
  46. STx7105 version 3.x
  47. bpa2: partition 'bigphysarea' created at 0x48000000, size 32768 kB (0x02000000 B)
  48. bpa2: bigphysarea ('bigphysarea') not in logical memory
  49. bpa2: partition 'LMI_IO' created at 0x4a000000, size 98304 kB (0x06000000 B)
  50. Built 1 zonelists in Zone order.  Total pages: 30480
  51. Kernel command line: console=ttyAS0,115200 root=8:2  rootfstype=ext3 rw rootflags=data=journal nwhwconf=device:eth0,hwaddr:24:cf:21:b1:04:95 phyaddr:0,watchdog:5000 mem=120M bigphysarea=2048
  52. bpa2: partition 'bigphysarea' created at 0x40d04000, size 8192 kB (0x00800000 B)
  53. PID hash table entries: 512 (order: 9, 2048 bytes)
  54. Using tmu for system timer
  55. Using 25.000 MHz high precision timer.
  56. console [ttyAS0] enabled
  57. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  58. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  59. Memory: 101248k/122880k available (3120k kernel code, 804k data, 116k init)
  60. PVR=04909200 CVR=60880000 PRR=00009e20
  61. I-cache : n_ways=2 n_sets=512 way_incr=16384
  62. I-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
  63. D-cache : n_ways=2 n_sets=512 way_incr=16384
  64. D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
  65. Mount-cache hash table entries: 512
  66. CPU: STx7105
  67. NET: Registered protocol family 16
  68. Generic PHY: Registered new driver
  69. SCSI subsystem initialized
  70. usbcore: registered new interface driver usbfs
  71. usbcore: registered new interface driver hub
  72. usbcore: registered new device driver usb
  73. DMA: Registering DMA API.
  74. Time: SuperH clocksource has been installed.
  75. NET: Registered protocol family 2
  76. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  77. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  78. TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  79. TCP: Hash tables configured (established 4096 bind 4096)
  80. TCP reno registered
  81. Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  82. NTFS driver 2.1.28 [Flags: R/O].
  83. JFFS2 version 2.2. (NAND) (SUMMARY)  Â© 2001-2006 Red Hat, Inc.
  84. fuse init (API version 7.8)
  85. JFS: nTxBlock = 791, nTxLock = 6329
  86. io scheduler noop registered
  87. io scheduler anticipatory registered (default)
  88. io scheduler deadline registered
  89. io scheduler cfq registered
  90. STMicroelectronics ASC driver initialized
  91. stasc.0: ttyAS0 at MMIO 0xfd032000 (irq = 121) is a stasc
  92. loop: module loaded
  93.         platform registration... <7>done!
  94.         GMAC - user ID: 0x10, Synopsys ID: 0x33
  95. PARSE CMDLINE: 00:00:00:00:00:00
  96. ETHADDR: 00:00:00:00:00:00
  97.         no valid MAC address; please, set using ifconfig or nwhwconfig!
  98.         eth0 - (dev. name: stmmaceth - id: 0, IRQ #134
  99.         IO base addr: 0xfd110000)
  100. STMMAC MII Bus: probed
  101. eth0: PHY ID 01018f2d at 17 IRQ -1 (0:11) active
  102. Micrel KSZ8041: Registered new driver
  103. nwhw_config: (eth0) setting mac address: 24:cf:21:b1:04:95
  104. Linux video capture interface: v2.00
  105. scsi0 : sata_stm
  106. ata1: SATA max UDMA/133 cmd 0xfe209000 ctl 0xfe209820 bmdma 0x00000000 irq 72
  107. ata1: SATA link down (SStatus 0 SControl 300)
  108. physmap platform flash device: 08000000 at 00000000
  109. physmap-flash physmap-flash: map_probe failed
  110. stm-ehci stm-ehci.0: st-ehci
  111. stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
  112. stm-ehci stm-ehci.0: irq 169, io mem 0xfe1ffe00
  113. stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
  114. usb usb1: configuration #1 chosen from 1 choice
  115. hub 1-0:1.0: USB hub found
  116. hub 1-0:1.0: 1 port detected
  117. stm-ohci stm-ohci.0: stm-ohci
  118. stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
  119. stm-ohci stm-ohci.0: irq 168, io mem 0xfe1ffc00
  120. usb usb2: configuration #1 chosen from 1 choice
  121. hub 2-0:1.0: USB hub found
  122. hub 2-0:1.0: 1 port detected
  123. stm-ehci stm-ehci.1: st-ehci
  124. stm-ehci stm-ehci.1: new USB bus registered, assigned bus number 3
  125. stm-ehci stm-ehci.1: irq 143, io mem 0xfeaffe00
  126. usb 1-1: new high speed USB device using stm-ehci and address 2
  127. stm-ehci stm-ehci.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
  128. usb usb3: configuration #1 chosen from 1 choice
  129. hub 3-0:1.0: USB hub found
  130. hub 3-0:1.0: 1 port detected
  131. stm-ohci stm-ohci.1: stm-ohci
  132. stm-ohci stm-ohci.1: new USB bus registered, assigned bus number 4
  133. stm-ohci stm-ohci.1: irq 142, io mem 0xfeaffc00
  134. usb 1-1: configuration #1 chosen from 1 choice
  135. usb usb4: configuration #1 chosen from 1 choice
  136. hub 4-0:1.0: USB hub found
  137. hub 4-0:1.0: 1 port detected
  138. Initializing USB Mass Storage driver...
  139. scsi1 : SCSI emulation for USB Mass Storage devices
  140. usbcore: registered new interface driver usb-storage
  141. USB Mass Storage support registered.
  142. usbcore: registered new interface driver libusual
  143. mice: PS/2 mouse device common for all mice
  144. i2c /dev entries driver
  145. DMA: Registering fdma_dmac.0 handler (16 channels).
  146. platform fdma_dmac.0: SLIM hw 0.0, FDMA fw 6.1
  147. DMA: Registering fdma_dmac.1 handler (16 channels).
  148. platform fdma_dmac.1: SLIM hw 0.0, FDMA fw 6.1
  149. STMicroelectronics - Coprocessors st231 Init
  150. st-coprocessor-0: No RAM reserved
  151. st231.0 Coprocessor -------------------------------------------
  152.     not configured!
  153. ---------------------------------------------------------------
  154. st-coprocessor-1: No RAM reserved
  155. st231.1 Coprocessor -------------------------------------------
  156.     not configured!
  157. ---------------------------------------------------------------
  158. stm_rng hardware driver 1.0 configured
  159. Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
  160. ALSA device list:
  161.   #0: STMicroelectronics STx7105 cut 3 SOC audio subsystem
  162. TCP cubic registered
  163. NET: Registered protocol family 1
  164. NET: Registered protocol family 17
  165. Waiting 10sec before mounting root device...
  166. scsi 1:0:0:0: Direct-Access     General  USB Flash Disk   1100 PQ: 0 ANSI: 0 CCS
  167. sd 1:0:0:0: [sda] 15679488 512-byte hardware sectors (8028 MB)
  168. sd 1:0:0:0: [sda] Write Protect is off
  169. sd 1:0:0:0: [sda] Assuming drive cache: write through
  170. sd 1:0:0:0: [sda] 15679488 512-byte hardware sectors (8028 MB)
  171. sd 1:0:0:0: [sda] Write Protect is off
  172. sd 1:0:0:0: [sda] Assuming drive cache: write through
  173.  sda: sda1 sda2 sda3 sda4
  174. sd 1:0:0:0: [sda] Attached SCSI removable disk
  175. kjournald starting.  Commit interval 5 seconds
  176. EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
  177. EXT3 FS on sda2, internal journal
  178. EXT3-fs: recovery complete.
  179. EXT3-fs: mounted filesystem with journal data mode.
  180. VFS: Mounted root (ext3 filesystem).
  181. Freeing unused kernel memory: 116k freed
  182. INIT: version 2.86 booting
  183. Mount /dev in tmpfs
  184. Copying device nodes to /dev
  185. Starting portmap daemon....
  186. Starting DEBUG Interface
  187. Mounting local filesystems...
  188. kjournald starting.  Commit interval 5 seconds
  189. EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
  190. EXT3 FS on sda1, internal journal
  191. EXT3-fs: recovery complete.
  192. EXT3-fs: mounted filesystem with ordered data mode.
  193. Cleaning /tmp.
  194. Hostname: atevio7500.
  195. Model: atevio7500
  196. vBoxType: 7
  197. Selected Model: Fortis HDBOX frontpanel control utility
  198. checkConfig
  199. configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM =     %H:%M:%S
  200. , WAKEUPDECREMENT  300
  201. setMode: : Inappropriate ioctl for device
  202. setbrightness: : Inappropriate ioctl for device
  203. setMode: : Inappropriate ioctl for device
  204. setled: : Inappropriate ioctl for device
  205. setMode: : Inappropriate ioctl for device
  206. setled: : Inappropriate ioctl for device
  207. setMode: : Inappropriate ioctl for device
  208. setled: : Inappropriate ioctl for device
  209. setMode: : Inappropriate ioctl for device
  210. setled: : Inappropriate ioctl for device
  211. setMode: : Inappropriate ioctl for device
  212. setled: : Inappropriate ioctl for device
  213. setMode: : Inappropriate ioctl for device
  214. setled: : Inappropriate ioctl for device
  215. setMode: : Inappropriate ioctl for device
  216. seticon: : Inappropriate ioctl for device
  217. setMode: : Inappropriate ioctl for device
  218. seticon: : Inappropriate ioctl for device
  219. setMode: : Inappropriate ioctl for device
  220. seticon: : Inappropriate ioctl for device
  221. setMode: : Inappropriate ioctl for device
  222. stmcore-display: using HDMI hotplug
  223. stmcore-display: STi7105 display: probed
  224. device probe found 2 display pipelines
  225. seticon: : Inappropriate ioctl for device
  226. setMode: : Inappropriate ioctl for device
  227. requesting frm: 'component.fw', c1177428/871cbdac
  228. seticon: : Inappropriate ioctl for device
  229. setMode: : Inappropriate ioctl for device
  230. seticon: : Inappropriate ioctl for device
  231. frm 'component.fw' successfully loaded
  232. setMode: : Inappropriate ioctl for device
  233. seticon: : Inappropriate ioctl for device
  234. setMode: : Inappropriate ioctl for device
  235. seticon: : Inappropriate ioctl for device
  236. setMode: : Inappropriate ioctl for device
  237. seticon: : Inappropriate ioctl for device
  238. setMode: : Inappropriate ioctl for device
  239. seticon: : Inappropriate ioctl for device
  240. setMode: : Inappropriate ioctl for device
  241. seticon: : Inappropriate ioctl for device
  242. HandleVSYNCInterrupt: - time discontinuity detected, vsync interval = 12145 field duration = 0
  243. setMode: : Inappropriate ioctl for device
  244. seticon: : Inappropriate ioctl for device
  245. setMode: : Inappropriate ioctl for device
  246. seticon: : Inappropriate ioctl for device
  247. setMode: : Inappropriate ioctl for device
  248. seticon: : Inappropriate ioctl for device
  249. stmfb: fb0 parameters = "1280x720-32@50:15m:pal:yuv:yuv"
  250. setMode: : Inappropriate ioctl for device
  251. seticon: : Inappropriate ioctl for device
  252. setMode: : Inappropriate ioctl for device
  253. seticon: : Inappropriate ioctl for device
  254. wakeup File not found
  255. starting telnetd
  256. init stmfb
  257. stmfb: fb1 parameters = "<NULL>"
  258. LOADING MODULES
  259. Model: atevio7500
  260. vBoxType: 7
  261. Selected Model: Fortis HDBOX frontpanel control utility
  262. checkConfig
  263. configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM =     %H:%M:%S
  264. , WAKEUPDECREMENT  300
  265. wakeup File not found
  266. load a firmware
  267. cannot open /dev/st231-1 device (errno = 28)
  268. load v firmware
  269. cannot open /dev/st231-0 device (errno = 28)
  270. init embx
  271. Unable to handle kernel NULL pointer dereference at virtual address 00000004
  272. pc = 8082e228
  273. *pde = 00000000
  274. Oops: 0001 [#1]
  275. Modules linked in: autofs4 nuvoton e2_proc embxshell stmcore_display_sti7105 stmfb
  276.  
  277. Pid : 385, Comm:               insmod
  278. PC is at add_wait_queue+0x28/0x80
  279. PC  : 8082e228 SP  : 8720de8c SR  : 400080f1 TEA : c1288ad8    Not tainted
  280. R0  : 00000000 R1  : 00000000 R2  : 8720de9c R3  : 40008001
  281. R4  : c10fbed0 R5  : 8720de90 R6  : c10fbd60 R7  : ffffffff
  282. R8  : 8720c000 R9  : 8720c000 R10 : c10fbec8 R11 : 8720c000
  283. R12 : 8179edc0 R13 : 8720c008 R14 : 00000002
  284. MACH: 00000000 MACL: 00000000 GBR : 296b9450 PR  : 80b065a0
  285.  
  286. Call trace:
  287. [<80813400>] default_wake_function+0x0/0x20
  288. [<c10f778e>] EMBX_Init+0x12e/0x160 [embxshell]
  289. [<808276c0>] blocking_notifier_call_chain+0x0/0x20
  290. [<80b07ac0>] mutex_unlock+0x0/0x60
  291. [<c10e800c>] init_module+0xc/0x60 [embxshell]
  292. [<8083b396>] sys_init_module+0xf6/0x1940
  293. [<8085c120>] __kmalloc+0x0/0xc0
  294. [<808078f8>] syscall_call+0xa/0xe
  295. [<8083b2a0>] sys_init_module+0x0/0x1940
  296.  
  297. Process: insmod (pid: 385, stack limit = 8720c001)
  298. Stack: (0x8720de8c to 0x8720e000)
  299. de80:                            c10fbed0 00000000 8179edc0 80813400 00000000
  300. dea0: 8725a20c c10f778e 8720dec4 c10fbd60 808276c0 80b07ac0 c10f2ae8 c10fbec0
  301. dec0: c10fbd60 c10e800c 8720ded8 c10f2ae8 ffffff0f c10fbd60 8083b396 00000018
  302. dee0: c10fbd60 00000000 c10f2730 c10f2730 8720c008 8720c000 c10fbe5c c10ed030
  303. df00: c10fbd6c 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  304. df20: 00000000 00000000 0000000b 00000000 0000000c 00000000 00000000 c10f31b8
  305. df40: 872ffb20 c10f2645 c10f2728 c10ed000 c10f2a98 8085c120 0000006d 0000006d
  306. df60: c10fbda8 c10f2750 c10f2ac0 c10f2ae8 00000016 c10f2aec c128a180 00000000
  307. df80: 808078f8 00000000 000001d4 00000514 00000000 00000021 0000005c 8083b2a0
  308. dfa0: 004118d0 00000120 00404fa4 00000080 00496018 00007c14 00496008 00007c14
  309. dfc0: 00496018 00496008 296b9460 7befed50 7befee84 000001d4 00000000 7befed8c
  310. dfe0: 29651ef2 00412712 00008000 296b9450 4a8568ad ffff9000 0000005c 00000160
  311. note: insmod[385] exited with preempt_count 1
  312. Segmentation fault
  313. embxmailbox: Unknown symbol EMBX_OS_MemFree
  314. embxmailbox: Unknown symbol EMBX_OS_EventWaitTimeout
  315. embxmailbox: Unknown symbol EMBX_OS_EventCreate
  316. embxmailbox: Unknown symbol EMBX_OS_MemAlloc
  317. embxmailbox: Unknown symbol EMBX_OS_EventSignal
  318. insmod: can't insert '/lib/modules/embxmailbox.ko': unknown symbol in module, or unknown parameter
  319. embxshm: Unknown symbol EMBX_OS_MemFree
  320. embxshm: Unknown symbol EMBX_EventListAdd
  321. embxshm: Unknown symbol EMBX_Mailbox_InterruptEnable
  322. embxshm: Unknown symbol EMBX_OS_EventWaitTimeout
  323. embxshm: Unknown symbol EMBX_OS_ThreadDelete
  324. embxshm: Unknown symbol EMBX_Mailbox_StatusGet
  325. embxshm: Unknown symbol EMBX_Mailbox_Alloc
  326. embxshm: Unknown symbol EMBX_OS_EventCreate
  327. embxshm: Unknown symbol EMBX_Mailbox_StatusSet
  328. embxshm: Unknown symbol EMBX_OS_PhysMemMap
  329. embxshm: Unknown symbol _EMBX_DriverMutexTake
  330. embxshm: Unknown symbol EMBX_OS_ContigMemAlloc
  331. embxshm: Unknown symbol EMBX_RegisterTransport
  332. embxshm: Unknown symbol EMBX_UnregisterTransport
  333. embxshm: Unknown symbol EMBX_OS_MemAlloc
  334. embxshm: Unknown symbol EMBX_Mailbox_UpdateInterruptHandler
  335. embxshm: Unknown symbol EMBX_OS_EventSignal
  336. embxshm: Unknown symbol EMBX_EventListFront
  337. embxshm: Unknown symbol EMBX_Mailbox_InterruptDisable
  338. embxshm: Unknown symbol EMBX_GetTuneable
  339. embxshm: Unknown symbol EMBX_OS_VirtToPhys
  340. embxshm: Unknown symbol _embx_handle_manager
  341. embxshm: Unknown symbol EMBX_Mailbox_Free
  342. embxshm: Unknown symbol EMBX_Mailbox_InterruptClear
  343. embxshm: Unknown symbol EMBX_OS_PhysMemUnMap
  344. embxshm: Unknown symbol EMBX_OS_ThreadCreate
  345. embxshm: Unknown symbol EMBX_OS_ContigMemFree
  346. embxshm: Unknown symbol EMBX_Mailbox_Synchronize
  347. embxshm: Unknown symbol _EMBX_DriverMutexRelease
  348. embxshm: Unknown symbol EMBX_EventListRemove
  349. embxshm: Unknown symbol EMBX_Mailbox_InterruptRaise
  350. insmod: can't insert '/lib/modules/embxshm.ko': unknown symbol in module, or unknown parameter
  351. mme_host: Unknown symbol EMBX_OS_MemFree
  352. mme_host: Unknown symbol EMBX_OS_EventWaitTimeout
  353. mme_host: Unknown symbol EMBX_ClosePort
  354. mme_host: Unknown symbol EMBX_Address
  355. mme_host: Unknown symbol EMBX_OS_ThreadDelete
  356. mme_host: Unknown symbol EMBX_GetTransportInfo
  357. mme_host: Unknown symbol EMBX_OS_EventCreate
  358. mme_host: Unknown symbol EMBX_SendMessage
  359. mme_host: Unknown symbol EMBX_Offset
  360. mme_host: Unknown symbol EMBX_RegisterObject
  361. mme_host: Unknown symbol EMBX_ConnectBlock
  362. mme_host: Unknown symbol EMBX_DeregisterObject
  363. mme_host: Unknown symbol EMBX_ReceiveBlock
  364. mme_host: Unknown symbol EMBX_UpdateObject
  365. mme_host: Unknown symbol EMBX_GetBufferSize
  366. mme_host: Unknown symbol EMBX_Release
  367. mme_host: Unknown symbol EMBX_OS_MemAlloc
  368. mme_host: Unknown symbol EMBX_Alloc
  369. mme_host: Unknown symbol EMBX_OS_EventSignal
  370. mme_host: Unknown symbol EMBX_CreatePort
  371. mme_host: Unknown symbol EMBX_InvalidatePort
  372. mme_host: Unknown symbol EMBX_OpenTransport
  373. mme_host: Unknown symbol EMBX_OS_VirtToPhys
  374. mme_host: Unknown symbol EMBX_Free
  375. mme_host: Unknown symbol EMBX_ReceiveBlockTimeout
  376. mme_host: Unknown symbol EMBX_OS_ThreadCreate
  377. mme_host: Unknown symbol EMBX_CloseTransport
  378. mme_host: Unknown symbol EMBX_Connect
  379. insmod: can't insert '/lib/modules/mme_host.ko': unknown symbol in module, or unknown parameter
  380. init AVS
  381. i2c-stm: arbitration error
  382. HandleVSYNCInterrupt: - time discontinuity detected, vsync interval = 16683 field duration = 0
  383. HandleVSYNCInterrupt: - time discontinuity detected, vsync interval = 16683 field duration = 0
  384. i2c-stm: arbitration error
  385. i2c-stm: arbitration error
  386. init player 191
  387. mmelog: Unknown symbol MME_GetTransformerCapability
  388. mmelog: Unknown symbol MME_SendCommand
  389. mmelog: Unknown symbol MME_AbortCommand
  390. mmelog: Unknown symbol MME_TermTransformer
  391. mmelog: Unknown symbol MME_InitTransformer
  392. insmod: can't insert '/lib/modules/mmelog.ko': unknown symbol in module, or unknown parameter
  393. p2div64: Unknown symbol tiny_panic
  394. insmod: can't insert '/lib/modules/p2div64.ko': unknown symbol in module, or unknown parameter
  395. pti: Unknown parameter `waitMS'
  396. insmod: can't insert '/lib/modules/pti.ko': unknown symbol in module, or unknown parameter
  397. stm_monitor: Unknown symbol MME_GetTransformerCapability
  398. stm_monitor: Unknown symbol MME_SendCommand
  399. stm_monitor: Unknown symbol __udivdi3
  400. stm_monitor: Unknown symbol MME_TermTransformer
  401. HandleVSYNCInterrupt: - time discontinuity detected, vsync interval = 18723 field duration = 0
  402. stm_monitor: Unknown symbol MME_InitTransformer
  403. insmod: can't insert '/lib/modules/stm_monitor.ko': unknown symbol in module, or unknown parameter
  404. stmdvb: Unknown symbol __divdi3
  405. stmdvb: Unknown symbol pti_hal_slot_clear_pid
  406. stmdvb: Unknown symbol MME_GetTransformerCapability
  407. stmdvb: Unknown symbol pti_hal_slot_link_buffer
  408. stmdvb: Unknown symbol stmfb_set_var_ex
  409. stmdvb: Unknown symbol pti_hal_get_new_descrambler
  410. stmdvb: Unknown symbol paceSwtsByPti
  411. stmdvb: Unknown symbol pti_hal_descrambler_link
  412. stmdvb: Unknown symbol MME_SendCommand
  413. stmdvb: Unknown symbol __udivdi3
  414. stmdvb: Unknown symbol MME_AbortCommand
  415. stmdvb: Unknown symbol stmfb_set_output_configuration
  416. stmdvb: Unknown symbol pti_hal_descrambler_set
  417. stmdvb: Unknown symbol stmhdmiio_get_audio_source
  418. stmdvb: Unknown symbol pti_hal_slot_free
  419. stmdvb: Unknown symbol stmhdmiio_set_audio_source
  420. stmdvb: Unknown symbol pti_hal_set_source
  421. stmdvb: Unknown symbol pti_hal_get_new_session_handle
  422. stmdvb: Unknown symbol MonitorSignalEvent
  423. stmdvb: Unknown symbol pti_hal_init
  424. stmdvb: Unknown symbol pti_hal_slot_set_pid
  425. stmdvb: Unknown symbol stmfb_get_fbinfo_ptr
  426. stmdvb: Unknown symbol pti_hal_slot_unlink_buffer
  427. stmdvb: Unknown symbol pti_hal_get_new_slot_handle
  428. stmdvb: Unknown symbol stmhdmiio_set_edid_handling
  429. stmdvb: Unknown symbol stmfb_get_output_configuration
  430. stmdvb: Unknown symbol MME_TermTransformer
  431. stmdvb: Unknown symbol stmhdmiio_get_edid_handling
  432. stmdvb: Unknown symbol MME_InitTransformer
  433. insmod: can't insert '/lib/modules/stmdvb.ko': unknown symbol in module, or unknown parameter
  434. player2: Unknown symbol __divdi3
  435. player2: Unknown symbol register_dvb_backend
  436. player2: Unknown symbol MME_GetTransformerCapability
  437. player2: Unknown symbol MME_SendCommand
  438. player2: Unknown symbol __udivdi3
  439. player2: Unknown symbol MME_AbortCommand
  440. player2: Unknown symbol ManifestorLastDisplayedBuffer
  441. player2: Unknown symbol g_ManifestorLastWaitQueue
  442. player2: Unknown symbol MonitorSignalEvent
  443. player2: Unknown symbol MME_TermTransformer
  444. player2: Unknown symbol MME_InitTransformer
  445. insmod: can't insert '/lib/modules/player2.ko': unknown symbol in module, or unknown parameter
  446. sth264pp: Unknown symbol OSDEV_DeviceList
  447. sth264pp: Unknown symbol OSDEV_DeviceDescriptors
  448. insmod: can't insert '/lib/modules/sth264pp.ko': unknown symbol in module, or unknown parameter
  449. stmalloc: Unknown symbol OSDEV_DeviceList
  450. stmalloc: Unknown symbol OSDEV_DeviceDescriptors
  451. insmod: can't insert '/lib/modules/stmalloc.ko': unknown symbol in module, or unknown parameter
  452. silencegen: Unknown symbol MME_DeregisterTransformer
  453. silencegen: Unknown symbol MME_RegisterTransformer
  454. insmod: can't insert '/lib/modules/silencegen.ko': unknown symbol in module, or unknown parameter
  455. init frontpanel
  456. input: TDT RC event driver as /class/input/input0
  457. Model: atevio7500
  458. vBoxType: 7
  459. Input device name: "TDT RC event driver"
  460. Mounting local filesystems...
  461. showSinglePic /boot/bootlogo.mvi
  462. VIDEO_SET_FORMAT failed (Bad file descriptor)
  463. Selected Remote: Fortis HDBOX RemoteControl
  464. RemoteControl Map:
  465.                 MENU - 04 - 139
  466.                  RED - 4B - 398
  467.                GREEN - 4A - 399
  468.               YELLOW - 49 - 400
  469.                 BLUE - 48 - 401
  470.                 EXIT - 1C - 102
  471.                 TEXT - 0D - 388
  472.                  EPG - 08 - 365
  473.               REWIND - 58 - 168
  474.          FASTFORWARD - 5C - 208
  475.                 PLAY - 55 - 207
  476.                PAUSE - 07 - 119
  477.               RECORD - 56 - 167
  478.                 STOP - 54 - 128
  479.              STANDBY - 0A - 116
  480.                 MUTE - 0C - 113
  481.            CHANNELUP - 5E - 104
  482.          CHANNELDOWN - 5F - 109
  483.             VOLUMEUP - 4E - 115
  484.           VOLUMEDOWN - 4F - 114
  485.                 INFO - 06 - 138
  486.                   OK - 1F - 352
  487.                   UP - 00 - 103
  488.                RIGHT - 02 - 106
  489.                 DOWN - 01 - 108
  490.                 LEFT - 03 - 105
  491.               RECALL - 09 - 396
  492.                 ZOOM - 0B - 372
  493.              VFORMAT - 0E - 371
  494.           RESOLUTION - 0F - 375
  495.              TVRADIO - 1A - 373
  496.                SLEEP - 1E - 409
  497.                 OPEN - 40 - 394
  498.                  FAV - 41 - 364
  499.                CHECK - 42 - 353
  500.                 UPUP - 43 - 414
  501.             DOWNDOWN - 44 - 415
  502.                 NEXT - 4C - 407
  503.                 LAST - 50 - 412
  504.                  PIP - 51 - 357
  505.                 SWAP - 52 - 354
  506.                 LIST - 53 - 370
  507.              0BUTTON - 10 -  11
  508.              1BUTTON - 11 -   2
  509.              2BUTTON - 12 -   3
  510.              3BUTTON - 13 -   4
  511.              4BUTTON - 14 -   5
  512.              5BUTTON - 15 -   6
  513.              6BUTTON - 16 -   7
  514.              7BUTTON - 17 -   8
  515.              8BUTTON - 18 -   9
  516.              9BUTTON - 19 -  10
  517. Frontpanel Map:
  518.              STANDBY - 00 - 116
  519.                   OK - 06 - 352
  520.                 MENU - 05 - 139
  521.             VOLUMEUP - 04 - 115
  522.           VOLUMEDOWN - 03 - 114
  523.            CHANNELUP - 01 - 104
  524.          CHANNELDOWN - 02 - 109
  525. Supports Long KeyPress: 1
  526. processComplex >
  527. period 10, delay 120
  528. Using period=10 delay=120
  529. [SEM] DOWN
  530. Hostname: atevio7500.
  531. starting telnetd
  532. Starting FTP server: vsftpd.
  533. HandleVSYNCInterrupt: - time discontinuity detected, vsync interval = 16687 field duration = 0
  534. Deconfiguring network interfaces... done.
  535. Setting up IP spoofing protection: rp_filter.
  536. Configuring network interfaces... done.
  537. LOADING e2
  538. starting e2->
  539. PYTHONPATH: /usr/lib/enigma2/python
  540. + (1) Background File Eraser
  541. + (8) graphics acceleration manager
  542. + (9) gLCDDC
  543. couldn't open LCD - load lcd.o!
  544. + (9) GFBDC
  545. 15360k video mem
  546. HandleVSYNCInterrupt: - time discontinuity detected, vsync interval = 16673 field duration = 0
  547. 13740kB available for acceleration surfaces.
  548. resolution: 720 x 576 x 32 (stride: 5120)
  549. + (9) Font Render Class
  550. [FONT] initializing lib...
  551. [FONT] loading fonts...
  552. [FONT] Intializing font cache, using max. 4MB...
  553. + (10) gRC
  554. RC thread created successfully
  555. + (15) eWindowStyleManager
  556. + (20) DVB-CI UI
clone this paste RAW Paste Data