API tools faq
paste
Guest User

http://rcn-ee.homeip.net:81/testing/beagleboard/v3.9-pixel-c

a guest
Mar 19th, 2013
152
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.77 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2013.01.01-00006-gef50daa (Feb 01 2013 - 11:44:58)
  2. OMAP SD/MMC: 0
  3. reading u-boot.img
  4. reading u-boot.img
  5.  
  6.  
  7. U-Boot 2013.01.01-00006-gef50daa (Feb 01 2013 - 11:44:58)
  8.  
  9. OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
  10. OMAP3 Beagle board + LPDDR/NAND
  11. I2C: ready
  12. DRAM: 512 MiB
  13. NAND: 0 MiB
  14. MMC: OMAP SD/MMC: 0
  15. *** Warning - readenv() failed, using default environment
  16.  
  17. In: serial
  18. Out: serial
  19. Err: serial
  20. Beagle xM Rev C
  21. No EEPROM on expansion board
  22. No EEPROM on expansion board
  23. Die ID #31f800029ff80000016849a90601e009
  24. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  25. musb-hdrc: MHDRC RTL version 1.800
  26. musb-hdrc: setup fifo_mode 4
  27. musb-hdrc: 28/31 max ep, 16384/16384 memory
  28. USB Peripheral mode controller at 480ab000 using PIO, IRQ 0
  29. Net: usb_ether
  30. Hit any key to stop autoboot: 0
  31. mmc0 is current device
  32. gpio: pin 173 (gpio 173) value is 0
  33. gpio: pin 4 (gpio 4) value is 0
  34. SD/MMC found on device 0
  35. reading uEnv.txt
  36. 1466 bytes read in 8 ms (178.7 KiB/s)
  37. Loaded environment from uEnv.txt
  38. Importing environment from mmc ...
  39. reading zImage
  40. 3872144 bytes read in 261 ms (14.1 MiB/s)
  41. zImage loaded at 0x80008000
  42. reading /dtbs/omap3-beagle-xm.dtb
  43. 8647 bytes read in 14 ms (602.5 KiB/s)
  44. /dtbs/omap3-beagle-xm.dtb loaded at 0x80000000
  45. Booting from mmc ...
  46. ## Error: "expansion_args" not defined
  47. bootz 0x80008000 - 0x80000000
  48. ## Flattened Device Tree blob at 80000000
  49. Booting using the fdt blob at 0x80000000
  50. Loading Device Tree to 8fffa000, end 8ffff1c6 ... OK
  51.  
  52. Starting kernel ...
  53.  
  54. [ 0.000000] Booting Linux on physical CPU 0x0
  55. [ 0.000000] Initializing cgroup subsys cpuset
  56. [ 0.000000] Initializing cgroup subsys cpu
  57. [ 0.000000] Linux version 3.9.0-rc3-armv7-d3.1 (voodoo@poseidon) (gcc version 4.7.3 20130205 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.02-01-20130221 - Linar
  58. o GCC 2013.02) ) #1 SMP Tue Mar 19 14:44:49 CDT 2013
  59. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  60. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  61. [ 0.000000] Machine: Generic OMAP3 (Flattened Device Tree), model: TI OMAP3 BeagleBoard xM
  62. [ 0.000000] cma: CMA: reserved 16 MiB at 9e800000
  63. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  64. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  65. [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
  66. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
  67. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1530000 s15232 r8192 d13440 u36864
  68. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
  69. [ 0.000000] Kernel command line: console=ttyO2,115200n8 console=tty0 consoleblank=0 vram=16MB omapfb.mode=dvi:hd720 omapdss.def_disp=dvi omapfb.debug=y omapdss.debug
  70. =y root=/dev/mmcblk0p5 ro rootfstype=ext4 rootwait fixrtc
  71. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  72. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  73. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  74. [ 0.000000] __ex_table already sorted, skipping sort
  75. [ 0.000000] allocated 1048576 bytes of page_cgroup
  76. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  77. [ 0.000000] Memory: 511MB = 511MB total
  78. [ 0.000000] Memory: 483668k/483668k available, 40620k reserved, 0K highmem
  79. [ 0.000000] Virtual kernel memory layout:
  80. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  81. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  82. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  83. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  84. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  85. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  86. [ 0.000000] .text : 0xc0008000 - 0xc0a176b8 (10302 kB)
  87. [ 0.000000] .init : 0xc0a18000 - 0xc0a7fb80 ( 415 kB)
  88. [ 0.000000] .data : 0xc0a80000 - 0xc0b40820 ( 771 kB)
  89. [ 0.000000] .bss : 0xc0b40820 - 0xc112359c (6028 kB)
  90. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  91. [ 0.000000] Hierarchical RCU implementation.
  92. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  93. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  94. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  95. [ 0.000000] Total of 96 interrupts on 1 active controller
  96. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  97. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  98. [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
  99. [ 0.000000] Console: colour dummy device 80x30
  100. [ 0.000000] console [tty0] enabled
  101. [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  102. [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  103. [ 0.000000] ... MAX_LOCK_DEPTH: 48
  104. [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  105. [ 0.000000] ... CLASSHASH_SIZE: 4096
  106. [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  107. [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  108. [ 0.000000] ... CHAINHASH_SIZE: 16384
  109. [ 0.000000] memory used by lock dependency info: 3695 kB
  110. [ 0.000000] per task-struct memory footprint: 1152 bytes
  111. [ 0.005157] Calibrating delay loop... 395.67 BogoMIPS (lpj=1978368)
  112. [ 0.109710] pid_max: default: 32768 minimum: 301
  113. [ 0.110260] Security Framework initialized
  114. [ 0.110412] AppArmor: AppArmor initialized
  115. [ 0.110748] Mount-cache hash table entries: 512
  116. [ 0.122253] Initializing cgroup subsys cpuacct
  117. [ 0.122344] Initializing cgroup subsys memory
  118. [ 0.122497] Initializing cgroup subsys devices
  119. [ 0.122528] Initializing cgroup subsys freezer
  120. [ 0.122650] Initializing cgroup subsys blkio
  121. [ 0.122680] Initializing cgroup subsys perf_event
  122. [ 0.123016] CPU: Testing write buffer coherency: ok
  123. [ 0.124694] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  124. [ 0.124786] Setting up static identity map for 0xc0704898 - 0xc07048f0
  125. [ 0.127960] Brought up 1 CPUs
  126. [ 0.128021] SMP: Total of 1 processors activated (395.67 BogoMIPS).
  127. [ 0.128051] CPU: All CPU(s) started in SVC mode.
  128. [ 0.131958] devtmpfs: initialized
  129. [ 0.184509] xor: measuring software checksum speed
  130. [ 0.279357] arm4regs : 743.600 MB/sec
  131. [ 0.379119] 8regs : 548.800 MB/sec
  132. [ 0.478912] 32regs : 663.600 MB/sec
  133. [ 0.478973] xor: using function: arm4regs (743.600 MB/sec)
  134. [ 0.479003] pinctrl core: initialized pinctrl subsystem
  135. [ 0.482421] regulator-dummy: no parameters
  136. [ 0.485473] NET: Registered protocol family 16
  137. [ 0.495697] DMA: preallocated 256 KiB pool for atomic coherent allocations
  138. [ 0.505157] Reprogramming SDRC clock to 400000000 Hz
  139. [ 0.511413] OMAP GPIO hardware version 2.5
  140. [ 0.528289] platform 49022000.mcbsp: alias fck already exists
  141. [ 0.529418] platform 49024000.mcbsp: alias fck already exists
  142. [ 0.537841] No ATAGs?
  143. [ 0.537872] hw-breakpoint: debug architecture 0x4 unsupported.
  144. [ 0.538848] Could not look up dss_hdmi hw_mod
  145. [ 0.541809] OMAP DMA hardware revision 5.0
  146. [ 0.544830] arm-pmu: alias fck already exists
  147. [ 0.570037] bio: create slab <bio-0> at 0
  148. [ 0.738708] raid6: int32x1 96 MB/s
  149. [ 0.908538] raid6: int32x2 122 MB/s
  150. [ 1.077911] raid6: int32x4 100 MB/s
  151. [ 1.247711] raid6: int32x8 100 MB/s
  152. [ 1.247741] raid6: using algorithm int32x2 (122 MB/s)
  153. [ 1.247772] raid6: using intx1 recovery algorithm
  154. [ 1.249877] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
  155. [ 1.249969] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
  156. [ 1.282897] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
  157. [ 1.287322] SCSI subsystem initialized
  158. [ 1.288757] usbcore: registered new interface driver usbfs
  159. [ 1.288940] usbcore: registered new interface driver hub
  160. [ 1.289337] usbcore: registered new device driver usb
  161. [ 1.292114] omap_i2c i2c.13: did not get pins for i2c error: -19
  162. [ 1.293609] omap_i2c i2c.13: bus 0 rev4.4 at 2600 kHz
  163. [ 1.306060] twl 0-0048: PIH (irq 23) chaining IRQs 336..344
  164. [ 1.306732] twl 0-0048: power (irq 341) chaining IRQs 344..351
  165. [ 1.311309] VDAC: 1800 mV
  166. [ 1.313690] VPLL2: 1800 mV
  167. [ 1.315643] VMMC1: 1850 <--> 3150 mV at 3150 mV
  168. [ 1.317718] VUSB1V5: 1500 mV
  169. [ 1.319152] VUSB1V8: 1800 mV
  170. [ 1.320556] VUSB3V1: 3100 mV
  171. [ 1.322174] VSIM: 1800 <--> 3000 mV at 1800 mV
  172. [ 1.324829] twl4030_gpio gpio.35: gpio (irq 336) chaining IRQs 352..369
  173. [ 1.331207] twl4030_usb twl4030-usb.36: Initialized TWL4030 USB module
  174. [ 1.331634] omap_i2c i2c.14: did not get pins for i2c error: -19
  175. [ 1.332519] omap_i2c i2c.14: bus 1 rev4.4 at 400 kHz
  176. [ 1.332824] omap_i2c i2c.15: did not get pins for i2c error: -19
  177. [ 1.333679] omap_i2c i2c.15: bus 2 rev4.4 at 100 kHz
  178. [ 1.335449] media: Linux media interface: v0.10
  179. [ 1.335632] Linux video capture interface: v2.00
  180. [ 1.335845] pps_core: LinuxPPS API ver. 1 registered
  181. [ 1.335876] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  182. [ 1.335968] PTP clock support registered
  183. [ 1.336853] omap-iommu omap-iommu.0: mmu_isp registered
  184. [ 1.338317] Advanced Linux Sound Architecture Driver Initialized.
  185. [ 1.341033] NetLabel: Initializing
  186. [ 1.341094] NetLabel: domain hash size = 128
  187. [ 1.341125] NetLabel: protocols = UNLABELED CIPSOv4
  188. [ 1.341430] NetLabel: unlabeled traffic allowed by default
  189. [ 1.341979] Switching to clocksource 32k_counter
  190. [ 1.428863] AppArmor: AppArmor Filesystem Enabled
  191. [ 1.459503] NET: Registered protocol family 2
  192. [ 1.461791] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  193. [ 1.462158] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
  194. [ 1.464813] TCP: Hash tables configured (established 4096 bind 4096)
  195. [ 1.465087] TCP: reno registered
  196. [ 1.465148] UDP hash table entries: 256 (order: 2, 20480 bytes)
  197. [ 1.465545] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
  198. [ 1.466857] NET: Registered protocol family 1
  199. [ 1.468505] RPC: Registered named UNIX socket transport module.
  200. [ 1.468566] RPC: Registered udp transport module.
  201. [ 1.468597] RPC: Registered tcp transport module.
  202. [ 1.468627] RPC: Registered tcp NFSv4.1 backchannel transport module.
  203. [ 1.470977] CPU PMU: probing PMU on CPU 0
  204. [ 1.471038] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  205. [ 1.473541] i.MXC CPU frequency driver
  206. [ 1.479766] audit: initializing netlink socket (disabled)
  207. [ 1.480072] type=2000 audit(1.470:1): initialized
  208. [ 1.769378] VFS: Disk quotas dquot_6.5.2
  209. [ 1.770050] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  210. [ 1.778076] NFS: Registering the id_resolver key type
  211. [ 1.778656] Key type id_resolver registered
  212. [ 1.778717] Key type id_legacy registered
  213. [ 1.778930] fuse init (API version 7.21)
  214. [ 1.784790] Btrfs loaded
  215. [ 1.785491] msgmni has been set to 976
  216. [ 1.791778] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  217. [ 1.791992] io scheduler noop registered
  218. [ 1.792022] io scheduler deadline registered
  219. [ 1.792663] io scheduler cfq registered (default)
  220. [ 1.795379] pinctrl-single 48002030.pinmux: 742 pins at pa fa002030 size 1484
  221. [ 1.796112] pinctrl-single 48002a58.pinmux: 46 pins at pa fa002a58 size 92
  222. [ 1.804229] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  223. [ 1.808532] Serial: IMX driver
  224. [ 1.809478] omap_uart serial.10: did not get pins for uart0 error: -19
  225. [ 1.810211] serial.10: ttyO0 at MMIO 0x4806a000 (irq = 88) is a OMAP UART0
  226. [ 1.811737] omap_uart serial.11: did not get pins for uart1 error: -19
  227. [ 1.812225] serial.11: ttyO1 at MMIO 0x4806c000 (irq = 89) is a OMAP UART1
  228. [ 1.813568] omap_uart serial.12: did not get pins for uart2 error: -19
  229. [ 1.813995] serial.12: ttyO2 at MMIO 0x49020000 (irq = 90) is a OMAP UART2
  230. [ 2.803894] console [ttyO2] enabled
  231. [ 2.808929] omap_uart serial.22: did not get pins for uart3 error: -19
  232. [ 2.816406] serial.22: ttyO3 at MMIO 0x49042000 (irq = 96) is a OMAP UART3
  233. [ 2.825531] [drm] Initialized drm 1.1.0 20060810
  234. [ 2.851867] brd: module loaded
  235. [ 2.867950] loop: module loaded
  236. [ 2.879486] OneNAND driver initializing
  237. [ 2.884918] omap2_mcspi spi.16: pins are not configured from the driver
  238. [ 2.894226] omap2_mcspi spi.17: pins are not configured from the driver
  239. [ 2.902130] omap2_mcspi spi.18: pins are not configured from the driver
  240. [ 2.910064] omap2_mcspi spi.19: pins are not configured from the driver
  241. [ 2.920196] usbcore: registered new interface driver ax88179_178a
  242. [ 2.926910] usbcore: registered new interface driver cdc_ether
  243. [ 2.933258] usbcore: registered new interface driver rndis_host
  244. [ 2.939727] usbcore: registered new interface driver cdc_ncm
  245. [ 2.947998] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  246. [ 2.955322] ehci-mxc: Freescale On-Chip EHCI Host driver
  247. [ 2.961212] Initializing USB Mass Storage driver...
  248. [ 2.966644] usbcore: registered new interface driver usb-storage
  249. [ 2.973052] USB Mass Storage support registered.
  250. [ 2.978393] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  251. [ 2.987274] mousedev: PS/2 mouse device common for all mice
  252. [ 2.997833] twl_rtc rtc.26: Power up reset detected.
  253. [ 3.003509] twl_rtc rtc.26: Enabling TWL-RTC
  254. [ 3.012023] twl_rtc rtc.26: rtc core: registered rtc.26 as rtc0
  255. [ 3.019836] i2c /dev entries driver
  256. [ 3.026397] lirc_dev: IR Remote Control driver registered, major 244
  257. [ 3.033752] smssdio: Siano SMS1xxx SDIO driver
  258. [ 3.038482] smssdio: Copyright Pierre Ossman
  259. [ 3.043457] Driver for 1-wire Dallas network protocol.
  260. [ 3.052246] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  261. [ 3.063598] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
  262. [ 3.072998] cpu0 supply vcc not found, using dummy regulator
  263. [ 3.079437] omap_cpufreq_init: physical regulator not present for MPU
  264. [ 3.087188] cpuidle: using governor ladder
  265. [ 3.091552] cpuidle: using governor menu
  266. [ 3.096160] sdhci: Secure Digital Host Controller Interface driver
  267. [ 3.102783] sdhci: Copyright(c) Pierre Ossman
  268. [ 3.108642] of_dma_request_slave_channel: dma-names property missing or empty
  269. [ 3.116363] omap-dma-engine omap-dma-engine: allocating channel for 62
  270. [ 3.123413] of_dma_request_slave_channel: dma-names property missing or empty
  271. [ 3.131042] omap-dma-engine omap-dma-engine: allocating channel for 61
  272. [ 3.140991] omap_hsmmc mmc.20: pins are not configured from the driver
  273. [ 3.183227] sdhci-pltfm: SDHCI platform and OF driver helper
  274. [ 3.190216] leds-gpio leds.23: pins are not configured from the driver
  275. [ 3.205627] ledtrig-cpu: registered to indicate activity on CPUs
  276. [ 3.212249] hidraw: raw HID events driver (C) Jiri Kosina
  277. [ 3.219055] usbcore: registered new interface driver usbhid
  278. [ 3.225067] usbhid: USB HID core driver
  279. [ 3.230834] ashmem: initialized
  280. [ 3.236114] oprofile: using arm/armv7
  281. [ 3.240997] TCP: cubic registered
  282. [ 3.246032] NET: Registered protocol family 10
  283. [ 3.253417] NET: Registered protocol family 17
  284. [ 3.258941] Key type dns_resolver registered
  285. [ 3.264038] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  286. [ 3.274505] ThumbEE CPU extension supported.
  287. [ 3.279113] Registering SWP/SWPB emulation handler
  288. [ 3.284454] SmartReflex Class3 initialized
  289. [ 3.290985] registered taskstats version 1
  290. [ 3.296112] Unable to handle kernel NULL pointer dereference at virtual address 00000014
  291. [ 3.304809] pgd = c0004000
  292. [ 3.307708] [00000014] *pgd=00000000
  293. [ 3.311523] Internal error: Oops: 5 [#1] SMP ARM
  294. [ 3.316436] Modules linked in:
  295. [ 3.319702] CPU: 0 Not tainted (3.9.0-rc3-armv7-d3.1 #1)
  296. [ 3.325714] PC is at dss_feat_get_num_ovls+0x8/0x14
  297. [ 3.330902] LR is at omapdss_compat_init+0x34/0x2d4
  298. [ 3.336090] pc : [<c03aff18>] lr : [<c03bd074>] psr: 60000113
  299. [ 3.336090] sp : de059e08 ip : de059de8 fp : 00000000
  300. [ 3.348297] r10: c0a4b850 r9 : 00000000 r8 : c0a92450
  301. [ 3.353820] r7 : c110f308 r6 : c0b05f94 r5 : 00000000 r4 : de01f010
  302. [ 3.360778] r3 : 00000000 r2 : 00000001 r1 : 22222222 r0 : de059dd8
  303. [ 3.367706] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
  304. [ 3.375457] Control: 10c5387d Table: 80004019 DAC: 00000015
  305. [ 3.381561] Process swapper/0 (pid: 1, stack limit = 0xde058240)
  306. [ 3.387939] Stack: (0xde059e08 to 0xde05a000)
  307. [ 3.392578] 9e00: de01f010 c110fc34 c0b05f94 c0a92460 c0a92450 00000000
  308. [ 3.401306] 9e20: c0a4b850 c0a4b930 22222222 de3b6000 de3b60a0 00000000 de3b60a0 de0ecf50
  309. [ 3.410003] 9e40: de3b2600 00000000 00000000 00000001 00000000 c0183e84 00000000 c0063440
  310. [ 3.418670] 9e60: 00000000 00000003 de0ecf50 00000000 c0b05f94 c0a92460 00000000 c0b05f94
  311. [ 3.427368] 9e80: c0437ca4 0000010d 00000000 c0a4b850 00000000 c0438cd0 c0438cbc c0437b50
  312. [ 3.436065] 9ea0: 00000000 c0a92460 c0a92494 c0b05f94 c0437ca4 c0437d14 00000000 de059ec8
  313. [ 3.444763] 9ec0: c0b05f94 c0436318 de003ea8 de0cd9d0 c0b05f94 c0b05f94 de3b2600 c0b13db0
  314. [ 3.453460] 9ee0: 00000000 c04372dc c08eb221 de080608 00fa00f9 c0b05f94 c0a61918 c0a7b8ac
  315. [ 3.462158] 9f00: c0b40900 0000010d c0a4b850 c04381fc 00000000 c0b05f80 c0a61918 c0a7b8ac
  316. [ 3.470825] 9f20: c0b40900 0000010d c0a4b850 c0438eb0 00000007 c0a61918 c0a7b8ac c0a4b878
  317. [ 3.479522] 9f40: de058000 c00087b0 c0a4b850 00000004 c0a7b8f0 00000008 00000007 c0a61918
  318. [ 3.488220] 9f60: c0a7b8ac c0b40900 0000010d c0a18274 c0a61920 c0a1898c 00000007 00000007
  319. [ 3.496887] 9f80: c0a18274 00000000 00000000 c06ef1d8 00000000 00000000 00000000 00000000
  320. [ 3.505584] 9fa0: 00000000 c06ef1e0 00000000 c000d850 00000000 00000000 00000000 00000000
  321. [ 3.514282] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  322. [ 3.522979] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 000a040c 00000a28
  323. [ 3.531677] [<c03aff18>] (dss_feat_get_num_ovls+0x8/0x14) from [<c03bd074>] (omapdss_compat_init+0x34/0x2d4)
  324. [ 3.542144] [<c03bd074>] (omapdss_compat_init+0x34/0x2d4) from [<c0a4b930>] (omapfb_probe+0x8c/0x784)
  325. [ 3.551940] [<c0a4b930>] (omapfb_probe+0x8c/0x784) from [<c0438cd0>] (platform_drv_probe+0x14/0x18)
  326. [ 3.561553] [<c0438cd0>] (platform_drv_probe+0x14/0x18) from [<c0437b50>] (driver_probe_device+0xac/0x200)
  327. [ 3.571838] [<c0437b50>] (driver_probe_device+0xac/0x200) from [<c0437d14>] (__driver_attach+0x70/0x94)
  328. [ 3.581817] [<c0437d14>] (__driver_attach+0x70/0x94) from [<c0436318>] (bus_for_each_dev+0x50/0x88)
  329. [ 3.591430] [<c0436318>] (bus_for_each_dev+0x50/0x88) from [<c04372dc>] (bus_add_driver+0xdc/0x230)
  330. [ 3.601043] [<c04372dc>] (bus_add_driver+0xdc/0x230) from [<c04381fc>] (driver_register+0x9c/0x12c)
  331. [ 3.610656] [<c04381fc>] (driver_register+0x9c/0x12c) from [<c0438eb0>] (platform_driver_probe+0x18/0x90)
  332. [ 3.620849] [<c0438eb0>] (platform_driver_probe+0x18/0x90) from [<c0a4b878>] (omapfb_init+0x28/0x54)
  333. [ 3.630554] [<c0a4b878>] (omapfb_init+0x28/0x54) from [<c00087b0>] (do_one_initcall+0x90/0x164)
  334. [ 3.639801] [<c00087b0>] (do_one_initcall+0x90/0x164) from [<c0a1898c>] (kernel_init_freeable+0x150/0x21c)
  335. [ 3.650054] [<c0a1898c>] (kernel_init_freeable+0x150/0x21c) from [<c06ef1e0>] (kernel_init+0x8/0xe4)
  336. [ 3.659759] [<c06ef1e0>] (kernel_init+0x8/0xe4) from [<c000d850>] (ret_from_fork+0x14/0x24)
  337. [ 3.668640] Code: e12fff1e c110e2b0 e59f3008 e5933000 (e5930014)
  338. [ 3.675201] ---[ end trace 15e49eb9add44746 ]---
  339. [ 3.680206] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
  340. [ 3.680206]
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!