API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Oct 29th, 2010
103
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 9.66 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.39.1 2010-01-28 r3054 [i386-redhat-linux-gnu] (local build)
  2. Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model:     ST9250315AS
  6. Serial Number:    6VC1K3DT
  7. Firmware Version: 0001SDM1
  8. User Capacity:    250,059,350,016 bytes
  9. Device is:        Not in smartctl database [for details use: -P showall]
  10. ATA Version is:   8
  11. ATA Standard is:  ATA-8-ACS revision 4
  12. Local Time is:    Fri Oct 29 20:22:42 2010 MSD
  13. SMART support is: Available - device has SMART capability.
  14. SMART support is: Enabled
  15.  
  16. === START OF READ SMART DATA SECTION ===
  17. SMART overall-health self-assessment test result: PASSED
  18.  
  19. General SMART Values:
  20. Offline data collection status:  (0x00) Offline data collection activity
  21.                     was never started.
  22.                     Auto Offline Data Collection: Disabled.
  23. Self-test execution status:      (   0) The previous self-test routine completed
  24.                     without error or no self-test has ever
  25.                     been run.
  26. Total time to complete Offline
  27. data collection:         (   0) seconds.
  28. Offline data collection
  29. capabilities:            (0x73) SMART execute Offline immediate.
  30.                     Auto Offline data collection on/off support.
  31.                     Suspend Offline collection upon new
  32.                     command.
  33.                     No Offline surface scan supported.
  34.                     Self-test supported.
  35.                     Conveyance Self-test supported.
  36.                     Selective Self-test supported.
  37. SMART capabilities:            (0x0003) Saves SMART data before entering
  38.                     power-saving mode.
  39.                     Supports SMART auto save timer.
  40. Error logging capability:        (0x01) Error logging supported.
  41.                     General Purpose Logging supported.
  42. Short self-test routine
  43. recommended polling time:    (   1) minutes.
  44. Extended self-test routine
  45. recommended polling time:    (  69) minutes.
  46. Conveyance self-test routine
  47. recommended polling time:    (   2) minutes.
  48. SCT capabilities:          (0x103b) SCT Status supported.
  49.                     SCT Feature Control supported.
  50.                     SCT Data Table supported.
  51.  
  52. SMART Attributes Data Structure revision number: 10
  53. Vendor Specific SMART Attributes with Thresholds:
  54. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  55.   1 Raw_Read_Error_Rate     0x000f   113   099   006    Pre-fail  Always       -       54464842
  56.   3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  57.   4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       369
  58.   5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  59.   7 Seek_Error_Rate         0x000f   072   060   030    Pre-fail  Always       -       19888979
  60.   9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1341
  61.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
  62.  12 Power_Cycle_Count       0x0032   100   037   020    Old_age   Always       -       360
  63. 184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
  64. 187 Reported_Uncorrect      0x0032   098   098   000    Old_age   Always       -       2
  65. 188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       279177134146
  66. 189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
  67. 190 Airflow_Temperature_Cel 0x0022   065   047   045    Old_age   Always       -       35 (Lifetime Min/Max 16/37)
  68. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       203
  69. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       9
  70. 193 Load_Cycle_Count        0x0032   073   073   000    Old_age   Always       -       54032
  71. 194 Temperature_Celsius     0x0022   035   053   000    Old_age   Always       -       35 (0 16 0 0)
  72. 195 Hardware_ECC_Recovered  0x001a   056   049   000    Old_age   Always       -       54464842
  73. 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       1
  74. 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       1
  75. 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
  76. 254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0
  77.  
  78. SMART Error Log Version: 1
  79. ATA Error Count: 16 (device log contains only the most recent five errors)
  80.     CR = Command Register [HEX]
  81.     FR = Features Register [HEX]
  82.     SC = Sector Count Register [HEX]
  83.     SN = Sector Number Register [HEX]
  84.     CL = Cylinder Low Register [HEX]
  85.     CH = Cylinder High Register [HEX]
  86.     DH = Device/Head Register [HEX]
  87.     DC = Device Command Register [HEX]
  88.     ER = Error register [HEX]
  89.     ST = Status register [HEX]
  90. Powered_Up_Time is measured from power on, and printed as
  91. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  92. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  93.  
  94. Error 16 occurred at disk power-on lifetime: 1167 hours (48 days + 15 hours)
  95.   When the command that caused the error occurred, the device was active or idle.
  96.  
  97.   After command completion occurred, registers were:
  98.   ER ST SC SN CL CH DH
  99.   -- -- -- -- -- -- --
  100.   40 51 00 28 bd 32 02  Error: UNC at LBA = 0x0232bd28 = 36879656
  101.  
  102.   Commands leading to the command that caused the error were:
  103.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  104.   -- -- -- -- -- -- -- --  ----------------  --------------------
  105.   25 00 20 0f bd 32 e2 00      00:04:43.527  READ DMA EXT
  106.   25 00 20 ef bc 32 e2 00      00:04:43.526  READ DMA EXT
  107.   25 00 20 cf bc 32 e2 00      00:04:43.525  READ DMA EXT
  108.   25 00 01 ff ff ff ef 00      00:04:43.503  READ DMA EXT
  109.   25 00 20 af bc 32 e2 00      00:04:43.477  READ DMA EXT
  110.  
  111. Error 15 occurred at disk power-on lifetime: 1167 hours (48 days + 15 hours)
  112.   When the command that caused the error occurred, the device was active or idle.
  113.  
  114.   After command completion occurred, registers were:
  115.   ER ST SC SN CL CH DH
  116.   -- -- -- -- -- -- --
  117.   40 51 00 28 bd 32 02  Error: UNC at LBA = 0x0232bd28 = 36879656
  118.  
  119.   Commands leading to the command that caused the error were:
  120.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  121.   -- -- -- -- -- -- -- --  ----------------  --------------------
  122.   25 00 80 af bc 32 e2 00      00:04:41.114  READ DMA EXT
  123.   25 00 80 cf 77 11 e2 00      00:04:41.097  READ DMA EXT
  124.   25 00 80 4f 77 11 e2 00      00:04:41.088  READ DMA EXT
  125.   25 00 20 af a6 00 e0 00      00:04:41.077  READ DMA EXT
  126.   25 00 20 0f 9c 11 e0 00      00:04:41.076  READ DMA EXT
  127.  
  128. Error 14 occurred at disk power-on lifetime: 1167 hours (48 days + 15 hours)
  129.   When the command that caused the error occurred, the device was active or idle.
  130.  
  131.   After command completion occurred, registers were:
  132.   ER ST SC SN CL CH DH
  133.   -- -- -- -- -- -- --
  134.   40 51 00 28 bd 32 02  Error: UNC at LBA = 0x0232bd28 = 36879656
  135.  
  136.   Commands leading to the command that caused the error were:
  137.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  138.   -- -- -- -- -- -- -- --  ----------------  --------------------
  139.   25 00 48 e7 bc 32 e2 00      01:28:22.524  READ DMA EXT
  140.   25 00 01 00 00 00 e0 00      01:28:22.362  READ DMA EXT
  141.   35 00 08 ff ff ff ef 00      01:28:22.361  WRITE DMA EXT
  142.   35 00 10 ff ff ff ef 00      01:28:22.361  WRITE DMA EXT
  143.   35 00 20 4f 39 b8 e3 00      01:28:22.360  WRITE DMA EXT
  144.  
  145. Error 13 occurred at disk power-on lifetime: 1167 hours (48 days + 15 hours)
  146.   When the command that caused the error occurred, the device was active or idle.
  147.  
  148.   After command completion occurred, registers were:
  149.   ER ST SC SN CL CH DH
  150.   -- -- -- -- -- -- --
  151.   40 51 00 28 bd 32 02  Error: UNC at LBA = 0x0232bd28 = 36879656
  152.  
  153.   Commands leading to the command that caused the error were:
  154.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  155.   -- -- -- -- -- -- -- --  ----------------  --------------------
  156.   25 00 48 e7 bc 32 e2 00      01:28:20.097  READ DMA EXT
  157.   35 00 08 ef ce 01 e0 00      01:28:20.096  WRITE DMA EXT
  158.   ea 00 00 00 00 00 a0 00      01:28:19.939  FLUSH CACHE EXT
  159.   35 00 08 ff ff ff ef 00      01:28:19.939  WRITE DMA EXT
  160.   25 00 48 e7 bc 32 e2 00      01:28:17.686  READ DMA EXT
  161.  
  162. Error 12 occurred at disk power-on lifetime: 1167 hours (48 days + 15 hours)
  163.   When the command that caused the error occurred, the device was active or idle.
  164.  
  165.   After command completion occurred, registers were:
  166.   ER ST SC SN CL CH DH
  167.   -- -- -- -- -- -- --
  168.   40 51 00 28 bd 32 02  Error: UNC at LBA = 0x0232bd28 = 36879656
  169.  
  170.   Commands leading to the command that caused the error were:
  171.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  172.   -- -- -- -- -- -- -- --  ----------------  --------------------
  173.   25 00 48 e7 bc 32 e2 00      01:28:17.686  READ DMA EXT
  174.   25 00 18 cf bc 32 e2 00      01:28:17.498  READ DMA EXT
  175.   35 00 08 cf d1 71 e0 00      01:28:17.498  WRITE DMA EXT
  176.   35 00 08 d7 b5 00 e0 00      01:28:17.498  WRITE DMA EXT
  177.   35 00 01 58 40 00 e0 00      01:28:17.497  WRITE DMA EXT
  178.  
  179. SMART Self-test log structure revision number 1
  180. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  181. # 1  Short offline       Completed without error       00%        12         -
  182. # 2  Extended offline    Aborted by host               90%        12         -
  183. # 3  Short offline       Completed without error       00%        12         -
  184.  
  185. SMART Selective self-test log data structure revision number 1
  186.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  187.     1        0        0  Not_testing
  188.     2        0        0  Not_testing
  189.     3        0        0  Not_testing
  190.     4        0        0  Not_testing
  191.     5        0        0  Not_testing
  192. Selective self-test flags (0x0):
  193.   After scanning selected spans, do NOT read-scan remainder of disk.
  194. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!