API tools faq
paste
Guest User

Untitled

a guest
Sep 25th, 2012
155
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 29.17 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.1.10-c.bmw+ (makc@tegra) (gcc version 4.6.3 (Debian 4.6.3-9) ) #4 SMP Tue Sep 18 15:58:39 MSK 2012
  4. [ 0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] Machine: Toshiba AC100 / Dynabook AZ
  7. [ 0.000000] PreMemHdl 0 00000008 1fd95000 00258800 0000000a
  8. [ 0.000000] FRAMEBUFFER 00000018 00010000 00258800 101a880a 02580400 02010800 00000000 00000007
  9. [ 0.000000] DISPLAY 0000000c 00000000 00000000 00000001 00000006
  10. [ 0.000000] PreMemHdl 1 00000008 1fd7d000 00002000 00000016
  11. [ 0.000000] CHIPSHMOO 00000048 00010001 00000000 00000014 00000014 000005ac 000005c0 00000028
  12. [ 0.000000] CHIPSHMOO 000005e8 00000028 00000610 00000014 00000624 0000002c 00020001 ad2f9361
  13. [ 0.000000] CHIPSHMOO 000003f2 00000000 00000000 00000006
  14. [ 0.000000] PreMemHdl 2 00000008 1fd7aff0 00002000 00000005
  15. [ 0.000000] WARMBOOT 00000004 00010002 00000000
  16. [ 0.000000] Tegra reserved memory:
  17. [ 0.000000] LP0: 1fd7aff0 - 1fd7cfef
  18. [ 0.000000] Bootloader framebuffer: 1fd95000 - 1ffedfff
  19. [ 0.000000] Framebuffer: 1c000000 - 1c7fffff
  20. [ 0.000000] 2nd Framebuffer: 1c800000 - 1d7fffff
  21. [ 0.000000] Carveout: 1d800000 - 1fffffff
  22. [ 0.000000] Vpr: 00000000 - 00000000
  23. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  24. [ 0.000000] On node 0 totalpages: 114688
  25. [ 0.000000] free_area_init_node: node 0, pgdat c06b2100, node_mem_map c0745000
  26. [ 0.000000] Normal zone: 1024 pages used for memmap
  27. [ 0.000000] Normal zone: 0 pages reserved
  28. [ 0.000000] Normal zone: 113664 pages, LIFO batch:31
  29. [ 0.000000] Tegra SKU: 8 Rev: A02 CPU Process: 2 Core Process: 1 Speedo ID: 0
  30. [ 0.000000] Tegra Revision: A02 SKU: 0x8 CPU Process: 2 Core Process: 1
  31. [ 0.000000] L310 cache controller enabled
  32. [ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e080001, Cache size: 1048576 B
  33. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0b49000 s10496 r8192 d14080 u32768
  34. [ 0.000000] pcpu-alloc: s10496 r8192 d14080 u32768 alloc=8*4096
  35. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  36. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113664
  37. [ 0.000000] Kernel command line: mem=512M@0M vmalloc=192M rootwait console=tty0 root=/dev/mmcblk0p3 tegrapart=recovery:300:a00:800,boot:d00:1000:800,mbr:1d00:200:800
  38. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  39. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  40. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  41. [ 0.000000] allocated 2097152 bytes of page_cgroup
  42. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  43. [ 0.000000] Memory: 448MB = 448MB total
  44. [ 0.000000] Memory: 444680k/444680k available, 79608k reserved, 0K highmem
  45. [ 0.000000] Virtual kernel memory layout:
  46. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  47. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  48. [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  49. [ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
  50. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  51. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  52. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  53. [ 0.000000] .text : 0xc0008000 - 0xc060f8d0 (6175 kB)
  54. [ 0.000000] .init : 0xc0610000 - 0xc065b900 ( 303 kB)
  55. [ 0.000000] .data : 0xc065c000 - 0xc06b56bc ( 358 kB)
  56. [ 0.000000] .bss : 0xc06b56fc - 0xc0744df4 ( 574 kB)
  57. [ 0.000000] Hierarchical RCU implementation.
  58. [ 0.000000] NR_IRQS:480
  59. [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  60. [ 0.000000] Console: colour dummy device 80x30
  61. [ 0.000000] console [tty0] enabled
  62. [ 0.009297] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
  63. [ 0.066794] pid_max: default: 32768 minimum: 301
  64. [ 0.070032] Security Framework initialized
  65. [ 0.073188] AppArmor: AppArmor initialized
  66. [ 0.076816] Mount-cache hash table entries: 512
  67. [ 0.080901] Initializing cgroup subsys cpuacct
  68. [ 0.084347] Initializing cgroup subsys memory
  69. [ 0.087853] Initializing cgroup subsys devices
  70. [ 0.091333] Initializing cgroup subsys freezer
  71. [ 0.094954] CPU: Testing write buffer coherency: ok
  72. [ 0.099697] ftrace: allocating 17679 entries in 52 pages
  73. [ 0.119906] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  74. [ 0.123707] CPU1: Booted secondary processor
  75. [ 0.125715] Brought up 2 CPUs
  76. [ 0.131144] SMP: Total of 2 processors activated (3974.75 BogoMIPS).
  77. [ 0.134096] devtmpfs: initialized
  78. [ 0.139581] print_constraints: dummy:
  79. [ 0.143245] NET: Registered protocol family 16
  80. [ 0.145701] host1x bus init
  81. [ 0.151241] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  82. [ 0.299186] The pingroup DTA was configured to <UNKNOWN> instead of RSVD1
  83. [ 0.305060] The pingroup DTB was configured to <UNKNOWN> instead of RSVD1
  84. [ 0.310941] The pingroup DTC was configured to <UNKNOWN> instead of RSVD1
  85. [ 0.316812] The pingroup DTD was configured to <UNKNOWN> instead of RSVD1
  86. [ 0.322688] The pingroup DTE was configured to <UNKNOWN> instead of RSVD1
  87. [ 0.328827] The pingroup SPDI was configured to <UNKNOWN> instead of RSVD2
  88. [ 0.334785] The pingroup SPDO was configured to <UNKNOWN> instead of RSVD2
  89. [ 0.340765] The pingroup SPIF was configured to <UNKNOWN> instead of RSVD4
  90. [ 0.346646] The pingroup UAC was configured to <UNKNOWN> instead of RSVD4
  91. [ 0.352731] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a XScale
  92. [ 0.398659] serial8250.0: ttyS1 at MMIO 0x70006200 (irq = 78) is a XScale
  93. [ 0.440505] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  94. [ 0.446904] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  95. [ 0.451821] hw-breakpoint: maximum watchpoint size is 4 bytes.
  96. [ 0.454843] tegra_arb_init: initialized
  97. [ 0.458727] tegra_iovmm_register: added iovmm-gart
  98. [ 0.470882] bio: create slab <bio-0> at 0
  99. [ 0.474278] SCSI subsystem initialized
  100. [ 0.478925] usbcore: registered new interface driver usbfs
  101. [ 0.483328] usbcore: registered new interface driver hub
  102. [ 0.487522] usbcore: registered new device driver usb
  103. [ 0.492223] tegra-otg tegra-otg: otg transceiver registered
  104. [ 0.499436] tps6586x 4-0034: VERSIONCRC is 05
  105. [ 0.507877] print_constraints: REG-SM_0: 725 <--> 1300 mV at 1275 mV normal standby
  106. [ 0.515436] print_constraints: REG-SM_1: 725 <--> 1125 mV at 975 mV normal standby
  107. [ 0.522096] print_constraints: REG-SM_2: 3700 mV normal standby
  108. [ 0.528192] print_constraints: REG-LDO_0: 3300 mV normal standby
  109. [ 0.534565] print_constraints: REG-LDO_1: 1100 mV normal standby
  110. [ 0.542047] print_constraints: REG-LDO_2: 725 <--> 1275 mV at 1275 mV normal standby
  111. [ 0.548429] print_constraints: REG-LDO_3: 3300 mV normal standby
  112. [ 0.555068] print_constraints: REG-LDO_4: 1800 mV normal standby
  113. [ 0.560913] print_constraints: REG-LDO_5: 2850 mV normal standby
  114. [ 0.566999] print_constraints: REG-LDO_6: 1800 mV normal standby
  115. [ 0.573016] print_constraints: REG-LDO_7: 3300 mV normal standby
  116. [ 0.579012] print_constraints: REG-LDO_8: 1800 mV normal standby
  117. [ 0.584860] print_constraints: REG-LDO_9: 2850 mV normal standby
  118. [ 0.589173] Switching to clocksource timer_us
  119. [ 0.595912] Switched to NOHz mode on CPU #0
  120. [ 0.599111] Switched to NOHz mode on CPU #1
  121. [ 0.608198] FS-Cache: Loaded
  122. [ 0.610448] CacheFiles: Loaded
  123. [ 0.614305] AppArmor: AppArmor Filesystem Enabled
  124. [ 0.619728] nvmap_page_pool_init: nvmap uc page pool size=13896 pages
  125. [ 0.638703] nvmap_page_pool_init: nvmap pool = uc, highmem=0, pool_size=13896,totalram=111170, freeram=96626, totalhigh=0, freehigh=0
  126. [ 0.684643] nvmap_page_pool_init: nvmap wc page pool size=13896 pages
  127. [ 0.703642] nvmap_page_pool_init: nvmap pool = wc, highmem=0, pool_size=13896,totalram=111170, freeram=82676, totalhigh=0, freehigh=0
  128. [ 0.749832] nvmap_page_pool_init: nvmap iwb page pool size=13896 pages
  129. [ 0.768921] nvmap_page_pool_init: nvmap pool = iwb, highmem=0, pool_size=13896,totalram=111170, freeram=68726, totalhigh=0, freehigh=0
  130. [ 0.815929] tegra-nvmap tegra-nvmap: created carveout iram (255KiB)
  131. [ 0.823440] tegra-nvmap tegra-nvmap: created carveout generic-0 (40960KiB)
  132. [ 0.835209] NET: Registered protocol family 2
  133. [ 0.841403] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  134. [ 0.848030] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  135. [ 0.853914] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  136. [ 0.859747] TCP: Hash tables configured (established 16384 bind 16384)
  137. [ 0.861908] TCP reno registered
  138. [ 0.866800] UDP hash table entries: 256 (order: 1, 8192 bytes)
  139. [ 0.872158] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  140. [ 0.875798] NET: Registered protocol family 1
  141. [ 0.878755] PCI: CLS 0 bytes, default 32
  142. [ 0.882344] host1x host1x: initialized
  143. [ 0.886409] PMU: registered new PMU device of type 0
  144. [ 0.891668] audit: initializing netlink socket (disabled)
  145. [ 0.895448] type=2000 audit(5.837:1): initialized
  146. [ 0.912528] msgmni has been set to 868
  147. [ 0.919874] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  148. [ 0.922846] io scheduler noop registered
  149. [ 0.926142] io scheduler deadline registered
  150. [ 0.929925] io scheduler cfq registered (default)
  151. [ 0.932760] mpe mpe: initialized
  152. [ 0.935451] gr3d gr3d: initialized
  153. [ 0.938081] gr2d gr2d: initialized
  154. [ 0.940480] isp isp: initialized
  155. [ 0.942709] vi vi: initialized
  156. [ 1.148594] tegradc tegradc.0: probed
  157. [ 1.188978] Console: switching to colour frame buffer device 128x37
  158. [ 1.226386] tegradc tegradc.0: probed
  159. [ 1.246849] nvhdcp: using "always on" policy.
  160. [ 1.257183] tegradc tegradc.1: probed
  161. [ 1.267286] tegradc tegradc.1: probed
  162. [ 1.277723] Initialized tegra uart driver
  163. [ 1.289816] loop: module loaded
  164. [ 1.302297] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  165. [ 1.313043] tegra USB phy - inst[1] platform info:
  166. [ 1.321273] port_otg: no
  167. [ 1.329433] has_hostpc: no
  168. [ 1.339461] phy_interface: USB_PHY_INTF_ULPI_LINK
  169. [ 1.348860] op_mode: TEGRA_USB_OPMODE_HOST
  170. [ 1.356720] vbus_gpio: -1
  171. [ 1.364466] vbus_reg: NULL
  172. [ 1.372417] hot_plug: disabled
  173. [ 1.380750] remote_wakeup: disabled
  174. [ 1.405551] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
  175. [ 1.418197] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
  176. [ 1.454112] tegra-ehci tegra-ehci.1: irq 53, io mem 0xc5004000
  177. [ 1.484182] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
  178. [ 1.495919] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  179. [ 1.508053] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  180. [ 1.518388] usb usb1: Product: Tegra EHCI Host Controller
  181. [ 1.529401] usb usb1: Manufacturer: Linux 3.1.10-c.bmw+ ehci_hcd
  182. [ 1.539079] usb usb1: SerialNumber: tegra-ehci.1
  183. [ 1.548300] hub 1-0:1.0: USB hub found
  184. [ 1.557251] hub 1-0:1.0: 1 port detected
  185. [ 1.566858] Failed lp0 wake enable for irq=53
  186. [ 1.576873] tegra USB phy - inst[2] platform info:
  187. [ 1.584689] port_otg: no
  188. [ 1.592594] has_hostpc: no
  189. [ 1.601923] phy_interface: USB_PHY_INTF_UTMI
  190. [ 1.611076] op_mode: TEGRA_USB_OPMODE_HOST
  191. [ 1.618660] vbus_gpio: -1
  192. [ 1.626284] vbus_reg: NULL
  193. [ 1.634186] hot_plug: enabled
  194. [ 1.642612] remote_wakeup: disabled
  195. [ 1.654579] create_regulator: REG-LDO_3: Failed to create debugfs directory
  196. [ 1.668286] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
  197. [ 1.681009] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
  198. [ 1.724199] tegra-ehci tegra-ehci.2: irq 129, io mem 0xc5008000
  199. [ 1.754178] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
  200. [ 1.763953] utmi_phy_irq: usb device plugged-in
  201. [ 1.776014] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  202. [ 1.788731] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  203. [ 1.799764] usb usb2: Product: Tegra EHCI Host Controller
  204. [ 1.811435] usb usb2: Manufacturer: Linux 3.1.10-c.bmw+ ehci_hcd
  205. [ 1.821855] usb usb2: SerialNumber: tegra-ehci.2
  206. [ 1.831593] hub 2-0:1.0: USB hub found
  207. [ 1.841127] hub 2-0:1.0: 1 port detected
  208. [ 1.851146] Failed lp0 wake enable for irq=129
  209. [ 1.862653] usbcore: registered new interface driver libusual
  210. [ 1.876351] Nvidia Tegra High-Speed USB SOC Device Controller driver (Apr 30, 2012)
  211. [ 1.887000] tegra USB phy - inst[0] platform info:
  212. [ 1.895315] port_otg: yes
  213. [ 1.903563] has_hostpc: no
  214. [ 1.913302] phy_interface: USB_PHY_INTF_UTMI
  215. [ 1.923109] op_mode: TEGRA_USB_OPMODE_DEVICE
  216. [ 1.931463] vbus_pmu_irq: 0
  217. [ 1.939555] vbus_gpio: -1
  218. [ 1.945307] usb 1-1: new high speed USB device number 2 using tegra-ehci
  219. [ 1.960752] charging: disabled
  220. [ 1.970061] remote_wakeup: disabled
  221. [ 1.982842] create_regulator: REG-LDO_3: Failed to create debugfs directory
  222. [ 2.003876] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
  223. [ 2.016215] g_cdc gadget: using random self ethernet address
  224. [ 2.028413] g_cdc gadget: using random host ethernet address
  225. [ 2.039033] usb0: MAC 8a:28:ed:e5:4d:e5
  226. [ 2.049802] usb0: HOST MAC 5e:7e:9d:aa:4a:41
  227. [ 2.061497] tegra-otg tegra-otg: SUSPEND --> PERIPHERAL
  228. [ 2.078330] g_cdc gadget: CDC Composite Gadget, version: King Kamehameha Day 2008
  229. [ 2.088651] g_cdc gadget: g_cdc ready
  230. [ 2.099169] tegra-udc: bind to driver g_cdc
  231. [ 2.111526] mousedev: PS/2 mouse device common for all mice
  232. [ 2.125114] usb 1-1: New USB device found, idVendor=0424, idProduct=2512
  233. [ 2.131750] tps6586x-rtc tps6586x-rtc.0: rtc core: registered tps6586x-rtc as rtc0
  234. [ 2.136419] trpc_sema_init: registered misc dev 10:56
  235. [ 2.141131] trpc_node_register: Adding 'local' to node list
  236. [ 2.146370] trpc_node_register: Adding 'avp-remote' to node list
  237. [ 2.151168] tegra_avp_probe: message area 11219000/11219110
  238. [ 2.154687] cpuidle: using governor ladder
  239. [ 2.195493] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  240. [ 2.198417] cpuidle: using governor menu
  241. [ 2.201319] hub 1-1:1.0: USB hub found
  242. [ 2.206624] sdhci: Secure Digital Host Controller Interface driver
  243. [ 2.209992] sdhci: Copyright(c) Pierre Ossman
  244. [ 2.214703] sdhci-pltfm: SDHCI platform and OF driver helper
  245. [ 2.219858] mmc0: Invalid maximum block size, assuming 512 bytes
  246. [ 2.222981] hub 1-1:1.0: 2 ports detected
  247. [ 2.264980] Registered led device: mmc0::
  248. [ 2.271355] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
  249. [ 2.284803] Failed gpio lp0 enable for irq=365, error=-22
  250. [ 2.301035] sdhci-tegra sdhci-tegra.0: SD card wake-up event registrationfailed with eroor: -22
  251. [ 2.319083] sdhci-tegra sdhci-tegra.0: vddio_sdmmc regulator not found: -19.Assuming vddio_sdmmc is not required.
  252. [ 2.337708] sdhci-tegra sdhci-tegra.0: vddio_sd_slot regulator not found: -19. Assuming vddio_sd_slot is not required.
  253. [ 2.351808] mmc1: Invalid maximum block size, assuming 512 bytes
  254. [ 2.354850] mmc1: no vmmc regulator found
  255. [ 2.357949] Registered led device: mmc1::
  256. [ 2.364339] mmc1: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA
  257. [ 2.367693] Registered led device: wifi-led
  258. [ 2.400481] nvec nvec.2: ec firmware version 01.20.00 / f9
  259. [ 2.413498] nvec nvec.2: added 6 NVEC subdevices
  260. [ 2.418367] mmc0: new high speed MMC card at address 0001
  261. [ 2.422275] mmcblk0: mmc0:0001 MMC32G 29.8 GiB
  262. [ 2.427430] mmcblk0boot0: mmc0:0001 MMC32G partition 1 2.00 MiB
  263. [ 2.432569] mmcblk0boot1: mmc0:0001 MMC32G partition 2 2.00 MiB
  264. [ 2.444994] usb 2-1: new high speed USB device number 2 using tegra-ehci
  265. [ 2.477552] input: nvec keyboard as /devices/virtual/input/input0
  266. [ 2.483479] tegrapart_partition: state->bdev->bd_disk->disk_name = mmcblk0
  267. [ 2.491195] parse_tegrapart: tegrapart=recovery:300:a00:800,boot:d00:1000:800,mbr:1d00:200:800
  268. [ 2.496610] parse_tegrapart: part #1 [recover] start=3072 size=10240
  269. [ 2.501838] parse_tegrapart: part #2 [boot] start=13312 size=16384
  270. [ 2.505134] parse_tegrapart: mbr start=29696
  271. [ 2.508679] tegra_msdos_parse: mbr_offset=29696
  272. [ 2.514389] tegra_msdos_parse: slot 1, start=2048 size=62481408
  273. [ 2.517669] tegra_msdos_parse: put_partition
  274. [ 2.521744] tegra_msdos_parse: slot 2, start=0 size=0
  275. [ 2.525830] tegra_msdos_parse: slot 3, start=0 size=0
  276. [ 2.529904] tegra_msdos_parse: slot 4, start=0 size=0
  277. [ 2.530095]
  278. [ 2.532576] tegra_msdos_parse: done
  279. [ 2.534438] mmcblk0: p1 p2 p3
  280. [ 2.609148] nvtegrapart: hidden_parts =
  281. [ 2.629396] nvtegrapart: #1 [PT ] start=2048 size=1024
  282. [ 2.641105] nvtegrapart: #2 [EBT ] start=3072 size=4096
  283. [ 2.652663] nvtegrapart: #3 [SOS ] start=7168 size=10240
  284. [ 2.663978] nvtegrapart: #4 [LNX ] start=17408 size=16384
  285. [ 2.675043] nvtegrapart: #5 [MBR ] start=33792 size=2048
  286. [ 2.686165] nvtegrapart: #6 [APP ] start=35840 size=62481408
  287. [ 2.692490]
  288. [ 2.701465] mmcblk0boot1: p1 p2 p3 p4 p5 p6
  289. [ 2.706346] mmcblk0boot1: p2 size 4096 extends beyond EOD, truncated
  290. [ 2.723515] mmcblk0boot1: p3 start 7168 is beyond EOD, truncated
  291. [ 2.734949] mmcblk0boot1: p4 start 17408 is beyond EOD, truncated
  292. [ 2.746308] mmcblk0boot1: p5 start 33792 is beyond EOD, truncated
  293. [ 2.757537] mmcblk0boot1: p6 start 35840 is beyond EOD, truncated
  294. [ 2.772377] tegrapart_partition: state->bdev->bd_disk->disk_name = mmcblk0boot0
  295. [ 2.786115] parse_tegrapart: tegrapart=recovery:300:a00:800,boot:d00:1000:800,mbr:1d00:200:800
  296. [ 2.797744] parse_tegrapart: part #1 [recover] start=3072 size=10240
  297. [ 2.809093] parse_tegrapart: part #2 [boot] start=13312 size=16384
  298. [ 2.818319] parse_tegrapart: mbr start=29696
  299. [ 2.827554] tegra_msdos_parse: mbr_offset=29696
  300. [ 2.836509] tegra_msdos_parse: no msdos magic
  301. [ 2.847228] mmcblk0boot0: p1 p2 unknown partition table
  302. [ 2.865360] usb 2-1: New USB device found, idVendor=0424, idProduct=2513
  303. [ 2.877400] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  304. [ 2.887585] hub 2-1:1.0: USB hub found
  305. [ 2.896493] hub 2-1:1.0: 3 ports detected
  306. [ 3.005283] usb 1-1.1: new high speed USB device number 3 using tegra-ehci
  307. [ 3.142923] usb 1-1.1: New USB device found, idVendor=0db0, idProduct=3871
  308. [ 3.155698] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  309. [ 3.165442] usb 1-1.1: Product: 802.11 n WLAN
  310. [ 3.174978] usb 1-1.1: Manufacturer: Ralink
  311. [ 3.184240] usb 1-1.1: SerialNumber: 1.0
  312. [ 3.199260] mmc1: new high speed SDHC card at address b368
  313. [ 3.209526] mmcblk1: mmc1:b368 SDC 15.0 GiB
  314. [ 3.223925] tegrapart_partition: state->bdev->bd_disk->disk_name = mmcblk1
  315. [ 3.238544] parse_tegrapart: tegrapart=recovery:300:a00:800,boot:d00:1000:800,mbr:1d00:200:800
  316. [ 3.251110] parse_tegrapart: part #1 [recover] start=3072 size=10240
  317. [ 3.263697] parse_tegrapart: part #2 [boot] start=13312 size=16384
  318. [ 3.274362] parse_tegrapart: mbr start=29696
  319. [ 3.285119] tegra_msdos_parse: mbr_offset=29696
  320. [ 3.298558] usb 1-1.2: new full speed USB device number 4 using tegra-ehci
  321. [ 3.309697] tegra_msdos_parse: no msdos magic
  322. [ 3.320910] mmcblk1: p1 p2 p1 p2
  323. [ 3.536938] usb 1-1.2: New USB device found, idVendor=0db0, idProduct=a871
  324. [ 3.551157] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  325. [ 3.609446] Registered led device: nvec-led
  326. [ 3.615162] input: NVEC sleep button as /devices/virtual/input/input1
  327. [ 3.628970] input: NVEC power button as /devices/virtual/input/input2
  328. [ 3.643612] input: NVEC lid switch button as /devices/virtual/input/input3
  329. [ 3.655783] Netfilter messages via NETLINK v0.30.
  330. [ 3.669429] nf_conntrack version 0.5.0 (6948 buckets, 27792 max)
  331. [ 3.683168] usb 2-1.1: new high speed USB device number 3 using tegra-ehci
  332. [ 3.695485] ctnetlink v0.93: registering with nfnetlink.
  333. [ 3.708798] ip_tables: (C) 2000-2006 Netfilter Core Team
  334. [ 3.720078] TCP cubic registered
  335. [ 3.732267] NET: Registered protocol family 10
  336. [ 3.745202] NET: Registered protocol family 17
  337. [ 3.759023] rfkill_gpio rfkill_gpio: wifi_rfkill device registered.
  338. [ 3.771589] Registering the dns_resolver key type
  339. [ 3.781936] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
  340. [ 3.799294] ThumbEE CPU extension supported.
  341. [ 3.811658] Registering SWP/SWPB emulation handler
  342. [ 3.832019] Disabling clocks left on by bootloader:
  343. [ 3.841514] stat_mon
  344. [ 3.851798] dsi2-fixed
  345. [ 3.861849] dsi1-fixed
  346. [ 3.870572] vi
  347. [ 3.879974] i2c3-fast
  348. [ 3.889285] fuse_burn
  349. [ 3.898132] clk_d
  350. [ 3.907137] pll_p_out2
  351. [ 3.916803] CPU rate: 1000 MHz
  352. [ 3.928979] tegra_fuse_program_init: no vdd_fuse. fuse write disabled
  353. [ 3.942662] usb 2-1.1: New USB device found, idVendor=0bdb, idProduct=190a
  354. [ 3.955919] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  355. [ 3.965347] usb 2-1.1: Product: F3307
  356. [ 3.975303] usb 2-1.1: Manufacturer: \xffffffc3\xffffff9b\xffffff9b F3307
  357. [ 3.985869] usb 2-1.1: SerialNumber: 3526410400749780
  358. [ 3.997419] registered taskstats version 1
  359. [ 4.011475] input: gpio-keys as /devices/platform/gpio-keys/input/input4
  360. [ 4.027437] tps6586x-rtc tps6586x-rtc.0: setting system clock to 2012-09-25 19:51:15 UTC (1348602675)
  361. [ 4.135546] usb 2-1.2: new high speed USB device number 4 using tegra-ehci
  362. [ 4.153151] EXT3-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (240)
  363. [ 4.208109] EXT2-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (244)
  364. [ 4.278528] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem
  365. [ 4.291729] EXT4-fs (mmcblk0p3): write access will be enabled during recovery
  366. [ 4.305917] usb 2-1.2: New USB device found, idVendor=0bda, idProduct=58f2
  367. [ 4.319746] usb 2-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
  368. [ 4.331103] usb 2-1.2: Product: USB Camera
  369. [ 4.341773] usb 2-1.2: Manufacturer: Y9A8G8LJ
  370. [ 4.352946] usb 2-1.2: SerialNumber: 200901010001
  371. [ 4.361622] EXT4-fs (mmcblk0p3): recovery complete
  372. [ 4.389674] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
  373. [ 4.402527] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
  374. [ 4.414709] devtmpfs: mounted
  375. [ 4.424484] Freeing init memory: 300K
  376. [ 4.830800] init: plymouth main process (60) killed by ABRT signal
  377. [ 4.857009] init: ureadahead main process (59) terminated with status 5
  378. [ 5.080940] elantech: assuming hardware version 3 (with firmware version 0x150500)
  379. [ 5.137537] elantech: Synaptics capabilities query result 0x69, 0x17, 0x09.
  380. [ 5.383150] input: ETPS/2 Elantech Touchpad as /devices/serio0/input/input5
  381. [ 5.451735] udevd[129]: starting version 175
  382. [ 6.087676] Bluetooth: Core ver 2.16
  383. [ 6.091206] NET: Registered protocol family 31
  384. [ 6.096696] Bluetooth: HCI device and connection manager initialized
  385. [ 6.100598] Bluetooth: HCI socket layer initialized
  386. [ 6.104694] Bluetooth: L2CAP socket layer initialized
  387. [ 6.108613] Bluetooth: SCO socket layer initialized
  388. [ 6.166393] Bluetooth: Generic Bluetooth USB driver ver 0.6
  389. [ 6.190645] cdc_acm 2-1.1:1.1: ttyACM0: USB ACM device
  390. [ 6.206159] cdc_acm 2-1.1:1.3: ttyACM1: USB ACM device
  391. [ 6.243466] cdc_acm 2-1.1:1.9: ttyACM2: USB ACM device
  392. [ 6.256782] usbcore: registered new interface driver cdc_acm
  393. [ 6.263874] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  394. [ 6.275812] usbcore: registered new interface driver btusb
  395. [ 6.285518] cdc_wdm 2-1.1:1.5: cdc-wdm0: USB WDM device
  396. [ 6.290731] cdc_wdm 2-1.1:1.8: cdc-wdm1: USB WDM device
  397. [ 6.295525] usbcore: registered new interface driver cdc_wdm
  398. [ 6.306089] Linux video capture interface: v2.00
  399. [ 6.325602] cfg80211: Calling CRDA to update world regulatory domain
  400. [ 6.345106] cdc_ether 2-1.1:1.6: wwan0: register 'cdc_ether' at usb-tegra-ehci.2-1.1, Mobile Broadband Network Device, 02:80:37:ec:02:00
  401. [ 6.350164] usbcore: registered new interface driver cdc_ether
  402. [ 6.356009] uvcvideo: Found UVC 1.00 device USB Camera (0bda:58f2)
  403. [ 6.383927] input: USB Camera as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.2/2-1.2:1.0/input/input6
  404. [ 6.414352] usbcore: registered new interface driver uvcvideo
  405. [ 6.417455] USB Video Class driver (1.1.1)
  406. [ 6.566997] type=1400 audit(1348602678.024:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=306 comm="apparmor_parser"
  407. [ 6.605767] usb 1-1.1: reset high speed USB device number 3 using tegra-ehci
  408. [ 6.719152] type=1400 audit(1348602678.174:3): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=324 comm="apparmor_parser"
  409. [ 6.781233] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  410. [ 6.786679] Registered led device: rt2800usb-phy0::radio
  411. [ 6.791638] Registered led device: rt2800usb-phy0::assoc
  412. [ 6.796341] Registered led device: rt2800usb-phy0::quality
  413. [ 6.801401] usbcore: registered new interface driver rt2800usb
  414. [ 6.907077] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
  415. [ 6.921635] cfg80211: World regulatory domain updated:
  416. [ 6.929142] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  417. [ 6.936135] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  418. [ 6.943190] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  419. [ 6.950244] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  420. [ 6.957296] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  421. [ 6.964293] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  422. [ 7.005128] asoc: alc5632-hifi <-> tegra20-i2s.0 mapping ok
  423. [ 7.020551] input: tegra-alc5632 Headset Jack as /devices/platform/tegra-alc5632.0/sound/card0/input7
  424. [ 7.611394] init: plymouth-log main process (421) terminated with status 1
  425. [ 7.645996] init: failsafe main process (424) killed by TERM signal
  426. [ 7.878975] init: plymouth-upstart-bridge main process (496) terminated with status 1
  427. [ 8.013440] type=1400 audit(1348602679.464:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=532 comm="apparmor_parser"
  428. [ 8.097685] type=1400 audit(1348602679.554:5): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=533 comm="apparmor_parser"
  429. [ 8.114477] type=1400 audit(1348602679.574:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=533 comm="apparmor_parser"
  430. [ 8.134417] type=1400 audit(1348602679.594:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=533 comm="apparmor_parser"
  431. [ 8.201763] type=1400 audit(1348602679.654:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=543 comm="apparmor_parser"
  432. [ 8.215475] type=1400 audit(1348602679.674:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=531 comm="apparmor_parser"
  433. [ 8.229415] type=1400 audit(1348602679.694:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=543 comm="apparmor_parser"
  434. [ 8.243314] type=1400 audit(1348602679.704:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=531 comm="apparmor_parser"
  435. [ 8.261925] Bluetooth: RFCOMM TTY layer initialized
  436. [ 8.266675] Bluetooth: RFCOMM socket layer initialized
  437. [ 8.269432] Bluetooth: RFCOMM ver 1.11
  438. [ 8.454839] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  439. [ 8.459302] Bluetooth: BNEP filters: protocol multicast
  440. [ 9.554448] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
  441. [ 9.760548] zram: module is from the staging directory, the quality is unknown, you have been warned.
  442. [ 9.764613] zram: Creating 2 devices ...
  443. [ 9.976844] Adding 111244k swap on /dev/zram0. Priority:5 extents:1 across:111244k SS
  444. [ 9.998780] Adding 111244k swap on /dev/zram1. Priority:5 extents:1 across:111244k SS
  445. [ 10.227130] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  446. [ 10.268517] ADDRCONF(NETDEV_UP): usb0: link is not ready
  447. [ 12.843563] fuse: module is already loaded
  448. [ 14.258728] wlan0: authenticate with 00:1b:fc:45:33:a5 (try 1)
  449. [ 14.262639] wlan0: authenticated
  450. [ 14.400467] wlan0: associate with 00:1b:fc:45:33:a5 (try 1)
  451. [ 14.410729] wlan0: RX AssocResp from 00:1b:fc:45:33:a5 (capab=0x411 status=0 aid=1)
  452. [ 14.412732] wlan0: associated
  453. [ 14.439863] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  454. [ 17.899250] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
  455. [ 26.012226] wlan0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!