Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@testing:/home/sigi# smartctl -x /dev/sdb
- smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-2-amd64] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Caviar Blue Serial ATA
- Device Model: WDC WD5000AAKX-001CA0
- Serial Number: WD-WCAYUE095320
- LU WWN Device Id: 5 0014ee 2057ff8d4
- Firmware Version: 15.01H15
- User Capacity: 500.107.862.016 bytes [500 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: Exact ATA specification draft version not indicated
- Local Time is: Thu Apr 19 17:35:16 2012 WEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 121) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: ( 8700) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 88) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x3037) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 172 172 051 - 1619
- 3 Spin_Up_Time POS--K 141 140 021 - 3925
- 4 Start_Stop_Count -O--CK 100 100 000 - 419
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 098 098 000 - 2098
- 10 Spin_Retry_Count -O--CK 100 100 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 418
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 43
- 193 Load_Cycle_Count -O--CK 200 200 000 - 375
- 194 Temperature_Celsius -O---K 106 099 000 - 37
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 54
- 198 Offline_Uncorrectable ----CK 200 200 000 - 31
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 135
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- GP/S Log at address 0x00 has 1 sectors [Log Directory]
- SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
- SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
- GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log]
- SMART Log at address 0x06 has 1 sectors [SMART self-test log]
- GP Log at address 0x07 has 1 sectors [Extended self-test log]
- SMART Log at address 0x09 has 1 sectors [Selective self-test log]
- GP Log at address 0x10 has 1 sectors [NCQ Command Error]
- GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
- GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
- GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xaa has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xab has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xac has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xad has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xae has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xaf has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log]
- GP Log at address 0xb6 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log]
- GP Log at address 0xc1 has 24 sectors [Device vendor specific log]
- GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
- GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- Device Error Count: 876 (device log contains only the most recent 24 errors)
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 876 [11] occurred at disk power-on lifetime: 2097 hours (87 days + 9 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 1c 37 48 28 40 00 Error: UNC at LBA = 0x1c374828 = 473385000
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 40 00 00 00 00 1c 37 48 25 40 08 04:42:25.440 READ FPDMA QUEUED
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 04:42:25.440 SET FEATURES [Reserved for Serial ATA]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 04:42:25.440 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 04:42:25.439 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 04:42:25.439 SET FEATURES [Set transfer mode]
- Error 875 [10] occurred at disk power-on lifetime: 2097 hours (87 days + 9 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 1c 37 48 28 40 00 Error: UNC at LBA = 0x1c374828 = 473385000
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 40 00 00 00 00 1c 37 48 25 40 08 04:42:23.068 READ FPDMA QUEUED
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 04:42:23.068 SET FEATURES [Reserved for Serial ATA]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 04:42:23.068 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 04:42:23.067 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 04:42:23.067 SET FEATURES [Set transfer mode]
- Error 874 [9] occurred at disk power-on lifetime: 2097 hours (87 days + 9 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 1c 37 48 28 40 00 Error: UNC at LBA = 0x1c374828 = 473385000
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 40 00 00 00 00 1c 37 48 25 40 08 04:42:21.186 READ FPDMA QUEUED
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 04:42:21.186 SET FEATURES [Reserved for Serial ATA]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 04:42:21.186 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 04:42:21.185 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 04:42:21.185 SET FEATURES [Set transfer mode]
- Error 873 [8] occurred at disk power-on lifetime: 2097 hours (87 days + 9 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 1c 37 48 28 40 00 Error: UNC at LBA = 0x1c374828 = 473385000
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 40 00 00 00 00 1c 37 48 25 40 08 04:42:19.122 READ FPDMA QUEUED
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 04:42:19.122 SET FEATURES [Reserved for Serial ATA]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 04:42:19.122 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 04:42:19.121 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 04:42:19.121 SET FEATURES [Set transfer mode]
- Error 872 [7] occurred at disk power-on lifetime: 2097 hours (87 days + 9 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 1c 37 48 28 40 00 Error: UNC at LBA = 0x1c374828 = 473385000
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 40 00 00 00 00 1c 37 48 25 40 08 04:42:16.763 READ FPDMA QUEUED
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 04:42:16.763 SET FEATURES [Reserved for Serial ATA]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 04:42:16.762 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 04:42:16.762 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 04:42:16.762 SET FEATURES [Set transfer mode]
- Error 871 [6] occurred at disk power-on lifetime: 2097 hours (87 days + 9 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 1c 37 48 28 40 00 Error: UNC at LBA = 0x1c374828 = 473385000
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 40 00 00 00 00 1c 37 48 25 40 08 04:42:14.397 READ FPDMA QUEUED
- 60 00 20 00 00 00 00 1c 37 48 05 40 08 04:42:14.397 READ FPDMA QUEUED
- 60 00 08 00 00 00 00 32 17 47 fd 40 08 04:42:14.382 READ FPDMA QUEUED
- 60 00 20 00 00 00 00 1c 37 48 05 40 08 04:42:12.950 READ FPDMA QUEUED
- 60 00 40 00 00 00 00 00 23 c8 25 40 08 04:42:12.950 READ FPDMA QUEUED
- Error 870 [5] occurred at disk power-on lifetime: 2094 hours (87 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 1c 37 48 28 40 00 Error: UNC at LBA = 0x1c374828 = 473385000
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 08 00 00 00 00 1c 37 48 25 40 08 01:33:22.561 READ FPDMA QUEUED
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 01:33:22.559 SET FEATURES [Reserved for Serial ATA]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 01:33:22.559 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 01:33:22.558 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 01:33:22.558 SET FEATURES [Set transfer mode]
- Error 869 [4] occurred at disk power-on lifetime: 2094 hours (87 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 1c 37 48 28 40 00 Error: UNC at LBA = 0x1c374828 = 473385000
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 08 00 00 00 00 1c 37 48 25 40 08 01:33:20.613 READ FPDMA QUEUED
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 01:33:20.613 SET FEATURES [Reserved for Serial ATA]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 01:33:20.613 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 01:33:20.612 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 01:33:20.612 SET FEATURES [Set transfer mode]
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed: read failure 90% 2096 473383057
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 37 Celsius
- Power Cycle Min/Max Temperature: 19/38 Celsius
- Lifetime Min/Max Temperature: 19/45 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (59)
- Index Estimated Time Temperature Celsius
- 60 2012-04-19 09:38 37 ******************
- ... ..( 48 skipped). .. ******************
- 109 2012-04-19 10:27 37 ******************
- 110 2012-04-19 10:28 36 *****************
- ... ..( 84 skipped). .. *****************
- 195 2012-04-19 11:53 36 *****************
- 196 2012-04-19 11:54 37 ******************
- ... ..( 6 skipped). .. ******************
- 203 2012-04-19 12:01 37 ******************
- 204 2012-04-19 12:02 38 *******************
- ... ..( 37 skipped). .. *******************
- 242 2012-04-19 12:40 38 *******************
- 243 2012-04-19 12:41 ? -
- 244 2012-04-19 12:42 19 -
- 245 2012-04-19 12:43 22 ***
- 246 2012-04-19 12:44 22 ***
- 247 2012-04-19 12:45 24 *****
- 248 2012-04-19 12:46 25 ******
- 249 2012-04-19 12:47 25 ******
- 250 2012-04-19 12:48 26 *******
- 251 2012-04-19 12:49 26 *******
- 252 2012-04-19 12:50 27 ********
- 253 2012-04-19 12:51 28 *********
- 254 2012-04-19 12:52 29 **********
- 255 2012-04-19 12:53 29 **********
- 256 2012-04-19 12:54 29 **********
- 257 2012-04-19 12:55 30 ***********
- 258 2012-04-19 12:56 31 ************
- 259 2012-04-19 12:57 31 ************
- 260 2012-04-19 12:58 32 *************
- ... ..( 2 skipped). .. *************
- 263 2012-04-19 13:01 32 *************
- 264 2012-04-19 13:02 33 **************
- 265 2012-04-19 13:03 33 **************
- 266 2012-04-19 13:04 34 ***************
- ... ..( 2 skipped). .. ***************
- 269 2012-04-19 13:07 34 ***************
- 270 2012-04-19 13:08 35 ****************
- ... ..( 8 skipped). .. ****************
- 279 2012-04-19 13:17 35 ****************
- 280 2012-04-19 13:18 36 *****************
- ... ..(120 skipped). .. *****************
- 401 2012-04-19 15:19 36 *****************
- 402 2012-04-19 15:20 37 ******************
- ... ..( 62 skipped). .. ******************
- 465 2012-04-19 16:23 37 ******************
- 466 2012-04-19 16:24 38 *******************
- 467 2012-04-19 16:25 37 ******************
- ... ..( 2 skipped). .. ******************
- 470 2012-04-19 16:28 37 ******************
- 471 2012-04-19 16:29 38 *******************
- 472 2012-04-19 16:30 37 ******************
- ... ..( 64 skipped). .. ******************
- 59 2012-04-19 17:35 37 ******************
- Warning: device does not support SCT Error Recovery Control command
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x8000 4 21029 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement