Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 3.10.10 (openwrt@snapon) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2012.12 r37922) ) #1 Tue Sep 10 06:58:23 PDT 2013
- [ 0.000000] CPU revision is: 00019740 (MIPS 74Kc)
- [ 0.000000] bcm47xx: using bcma bus
- [ 0.000000] bcma: bus0: Found chip with id 0x4716, rev 0x01 and package 0x09
- [ 0.000000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x1F, class 0x0)
- [ 0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x01, class 0x0)
- [ 0.000000] bcma: bus0: Found rev 5 PMU (capabilities 0x11242C05)
- [ 0.000000] bcma: bus0: Found serial flash
- [ 0.000000] bcma: bus0: Found M25P64 serial flash (size: 8192KiB, blocksize: 0x10000, blocks: 128)
- [ 0.000000] bcma: bus0: Early bus registered
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 02000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
- [ 0.000000] On node 0 totalpages: 8192
- [ 0.000000] free_area_init_node: node 0, pgdat 802f6b80, node_mem_map 81000000
- [ 0.000000] Normal zone: 64 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 8192 pages, LIFO batch:0
- [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
- [ 0.000000] Kernel command line: noinitrd console=ttyS0,115200
- [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
- [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Writing ErrCtl register=00000000
- [ 0.000000] Readback ErrCtl register=00000000
- [ 0.000000] Memory: 28872k/32768k available (2526k kernel code, 3896k reserved, 584k data, 212k init, 0k highmem)
- [ 0.000000] NR_IRQS:128
- [ 0.036000] Calibrating delay loop... 176.12 BogoMIPS (lpj=352256)
- [ 0.036000] pid_max: default: 32768 minimum: 301
- [ 0.036000] Mount-cache hash table entries: 512
- [ 0.040000] NET: Registered protocol family 16
- [ 0.064000] bio: create slab <bio-0> at 0
- [ 0.072000] Switching to clocksource MIPS
- [ 0.084000] NET: Registered protocol family 2
- [ 0.084000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
- [ 0.084000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.084000] TCP: Hash tables configured (established 512 bind 512)
- [ 0.084000] TCP: reno registered
- [ 0.084000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.084000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.084000] NET: Registered protocol family 1
- [ 0.084000] PCI: CLS 0 bytes, default 32
- [ 0.088000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x11, class 0x0)
- [ 0.088000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x00, class 0x0)
- [ 0.088000] bcma: bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x04, class 0x0)
- [ 0.088000] bcma: bus0: Core 5 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0E, class 0x0)
- [ 0.088000] bcma: bus0: Core 6 found: DDR1/DDR2 Memory Controller (manuf 0x4BF, id 0x82E, rev 0x01, class 0x0)
- [ 0.088000] bcma: bus0: Core 7 found: Internal Memory (manuf 0x4BF, id 0x80E, rev 0x07, class 0x0)
- [ 0.088000] bcma: bus0: Core 8 found: I2S (manuf 0x4BF, id 0x834, rev 0x00, class 0x0)
- [ 0.144000] bcma: bus0: Using SPROM revision 8 provided by platform.
- [ 0.144000] bcma: bus0: PMU resource config unknown or not needed for device 0x4716
- [ 0.144000] bcma: bus0: Workarounds unknown or not needed for device 0x4716
- [ 0.144000] bcma: bus0: Initializing MIPS core...
- [ 0.144000] bcma: bus0: Moved i2s interrupt to oob line 7 instead of 8
- [ 0.144000] bcma: bus0: set_irq: core 0x0812, irq 3 => 3
- [ 0.144000] bcma: bus0: set_irq: core 0x082d, irq 4 => 4
- [ 0.144000] bcma: bus0: set_irq: core 0x0819, irq 5 => 5
- [ 0.144000] bcma: bus0: set_irq: core 0x0820, irq 6 => 6
- [ 0.144000] bcma: bus0: set_irq: core 0x0800, irq 2 => 2
- [ 0.144000] bcma: bus0: set_irq: core 0x0834, irq 0 => 2
- [ 0.144000] bcma: bus0: IRQ reconfiguration done
- [ 0.144000] bcma: core 0x0800, irq : 2(S)* 3 4 5 6 D I
- [ 0.144000] bcma: core 0x082c, irq : 2(S) 3 4 5 6 D I*
- [ 0.144000] bcma: core 0x0812, irq : 2(S) 3* 4 5 6 D I
- [ 0.144000] bcma: core 0x082d, irq : 2(S) 3 4* 5 6 D I
- [ 0.144000] bcma: core 0x0819, irq : 2(S) 3 4 5* 6 D I
- [ 0.144000] bcma: core 0x0820, irq : 2(S) 3 4 5 6* D I
- [ 0.144000] bcma: core 0x082e, irq : 2(S) 3 4 5 6 D* I
- [ 0.144000] bcma: core 0x080e, irq : 2(S) 3 4 5 6 D I*
- [ 0.144000] bcma: core 0x0834, irq : 2(S)* 3 4 5 6 D I
- [ 0.144000] bcma: bus0: PCIEcore in host mode found
- [ 0.144000] bcma: bus0: This PCIE core is disabled and not working
- [ 0.152000] bcma: bus0: Bus registered
- [ 0.156000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.156000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.156000] msgmni has been set to 56
- [ 0.156000] io scheduler noop registered
- [ 0.156000] io scheduler deadline registered (default)
- [ 0.160000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
- [ 0.196000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2) is a U6_16550A
- [ 0.552000] console [ttyS0] enabled
- [ 0.600000] 6 bcm47xxpart partitions found on MTD device bcm47xxsflash
- [ 0.608000] Creating 6 MTD partitions on "bcm47xxsflash":
- [ 0.612000] 0x000000000000-0x000000040000 : "boot"
- [ 0.620000] 0x000000040000-0x0000007f0000 : "linux"
- [ 0.632000] 0x00000004001c-0x000000040960 : "loader"
- [ 0.640000] 0x000000040960-0x00000014d000 : "kernel"
- [ 0.644000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- [ 0.660000] 0x00000014d000-0x0000007f0000 : "rootfs"
- [ 0.668000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- [ 0.684000] mtd: partition "rootfs" set to be root filesystem
- [ 0.688000] mtd: partition "rootfs_data" created automatically, ofs=0x320000, len=0x4d0000
- [ 0.696000] 0x000000320000-0x0000007f0000 : "rootfs_data"
- [ 0.708000] 0x0000007f0000-0x000000800000 : "nvram"
- [ 0.720000] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds)
- [ 0.732000] TCP: cubic registered
- [ 0.736000] NET: Registered protocol family 17
- [ 0.740000] Bridge firewalling registered
- [ 0.744000] 8021q: 802.1Q VLAN Support v1.8
- [ 0.760000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
- [ 0.768000] Freeing unused kernel memory: 212K (8030b000 - 80340000)
- [ 2.940000] pps_core: LinuxPPS API ver. 1 registered
- [ 2.948000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 2.960000] PTP clock support registered
- [ 3.388000] bgmac bcma0:1: Found PHY addr: 30 (NOREGS)
- [ 3.396000] bgmac bcma0:1: Support for Roboswitch not implemented
- [ 3.408000] libphy: bgmac mii bus: probed
- [ 3.488000] b53_common: found switch: BCM53115, rev 8
- [ 3.496000] (unregistered net_device): attached PHY driver [Broadcom B53 (1)] (mii_bus:phy_addr=bgmac-0-0:1e)
- [ 3.508000] bgmac: Broadcom 47xx GBit MAC driver loaded
- [ 3.756000] Found board: "Linksys E2000 V1"
- [ 3.764000] diag: kernel found a "Linksys E2000 V1"
- [ 3.768000] diag: board was detected as "Linksys E2000 V1", but not gpio configuration available
- [ 3.776000] diag: now trying legacy detect
- [ 3.780000] diag: Detected 'Linksys WRT54G/GS/GL'
- [ 7.596000] jffs2: notice: (212) jffs2_build_xattr_subsystem: complete building xattr subsystem, 18 of xdatum (1 unchecked, 17 orphan) and 58 of xref (0 dead, 17 orphan) found.
- [ 10.268000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
- [ 10.276000] Backport generated by backports.git backports-20130617-4-ge3220f5
- [ 10.312000] cfg80211: Calling CRDA to update world regulatory domain
- [ 10.328000] cfg80211: World regulatory domain updated:
- [ 10.332000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 10.340000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.348000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 10.356000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 10.364000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.372000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.716000] NET: Registered protocol family 10
- [ 11.196000] PPP generic driver version 2.4.2
- [ 11.724000] brcmsmac bcma0:0: mfg 4bf core 812 rev 17 class 0 irq 3
- [ 11.800000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 11.840000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 11.892000] xt_time: kernel timezone is -0000
- [ 12.204000] NET: Registered protocol family 24
- [ 12.224000] nf_conntrack version 0.5.0 (454 buckets, 1816 max)
- [ 12.716000] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 18.688000] device eth0.1 entered promiscuous mode
- [ 18.692000] device eth0 entered promiscuous mode
- [ 18.704000] br-lan: port 1(eth0.1) entered forwarding state
- [ 18.708000] br-lan: port 1(eth0.1) entered forwarding state
- [ 19.668000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
- [ 20.712000] br-lan: port 1(eth0.1) entered forwarding state
- [ 23.292000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
- [ 29.200000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
- [ 29.212000] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
- [ 29.228000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 29.256000] device wlan0 entered promiscuous mode
- [ 29.276000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
- [ 29.284000] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
- [ 29.296000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 29.876000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: Beacon enabled: true
- [ 29.888000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 29.900000] br-lan: port 2(wlan0) entered forwarding state
- [ 29.908000] br-lan: port 2(wlan0) entered forwarding state
- [ 29.916000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
- [ 29.928000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
- [ 29.940000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
- [ 29.948000] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
- [ 31.912000] br-lan: port 2(wlan0) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement