Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Bootdata ok (command line is ro root=/dev/host/root acpi=ht)
- Linux version 2.6.18-274.12.1.el5xen (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-51)) #1 SMP Tue Nov 29 14:18:21 EST 2011
- BIOS-provided physical RAM map:
- Xen: 0000000000000000 - 000000002c400000 (usable)
- On node 0 totalpages: 177003
- DMA zone: 2273 pages, LIFO batch:0
- DMA32 zone: 174730 pages, LIFO batch:31
- DMI present.
- DMI: MSI MS-7522/MSI X58 Pro-E (MS-7522), BIOS V8.15 03/19/2011
- ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa590
- ACPI: RSDT (v001 7522MS A7522800 0x20110319 MSFT 0x00000097) @ 0x00000000bf780000
- ACPI: FADT (v001 7522MS A7522800 0x20110319 MSFT 0x00000097) @ 0x00000000bf780200
- ACPI: MADT (v001 7522MS A7522800 0x20110319 MSFT 0x00000097) @ 0x00000000bf780390
- ACPI: MCFG (v001 7522MS OEMMCFG 0x20110319 MSFT 0x00000097) @ 0x00000000bf780440
- ACPI: OEMB (v001 7522MS A7522800 0x20110319 MSFT 0x00000097) @ 0x00000000bf78e040
- ACPI: HPET (v001 7522MS OEMHPET 0x20110319 MSFT 0x00000097) @ 0x00000000bf78a480
- ACPI: SSDT (v001 DpgPmm CpuPm 0x00000012 INTL 0x20051117) @ 0x00000000bf790980
- ACPI: DSDT (v001 A7522 A7522800 0x00000800 INTL 0x20051117) @ 0x0000000000000000
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
- ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
- ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
- ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
- ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
- ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
- ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
- ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
- ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
- ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
- Using ACPI for processor (LAPIC) configuration information
- Intel MultiProcessor Specification v1.4
- Virtual Wire compatibility mode.
- OEM ID: INTEL Product ID: TYLERSBURG APIC at: 0xFEE00000
- I/O APIC #8 Version 32 at 0xFEC00000.
- Setting APIC routing to xen
- Processors: 12
- Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000)
- Built 1 zonelists. Total pages: 177003
- Kernel command line: ro root=/dev/host/root acpi=ht
- Initializing CPU#0
- PID hash table entries: 4096 (order: 12, 32768 bytes)
- Xen reported: 3074.352 MHz processor.
- Console: colour VGA+ 80x25
- Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
- Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
- Software IO TLB enabled:
- Aperture: 64 megabytes
- Kernel range: 0xffff8800021af000 - 0xffff8800061af000
- PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- Memory: 618704k/724992k available (2535k kernel code, 97672k reserved, 1748k data, 196k init)
- Calibrating delay using timer specific routine.. 7687.77 BogoMIPS (lpj=15375548)
- Security Framework v1.0.0 initialized
- SELinux: Initializing.
- SELinux: Starting in permissive mode
- selinux_register_security: Registering secondary module capability
- Capability LSM initialized as secondary
- Mount-cache hash table entries: 256
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 8192K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- (SMP-)alternatives turned off
- GSI 16 sharing vector 0x60 and IRQ 16
- GSI 17 sharing vector 0x68 and IRQ 17
- GSI 18 sharing vector 0x70 and IRQ 18
- GSI 19 sharing vector 0x78 and IRQ 19
- GSI 21 sharing vector 0x88 and IRQ 21
- GSI 23 sharing vector 0x90 and IRQ 23
- Initializing CPU#1
- Initializing CPU#2
- Initializing CPU#3
- Initializing CPU#4
- Initializing CPU#5
- Initializing CPU#6
- Brought up 8 CPUs
- sizeof(vma)=168 bytes
- sizeof(page)=56 bytes
- sizeof(inode)=560 bytes
- sizeof(dentry)=216 bytes
- sizeof(ext3inode)=760 bytes
- sizeof(buffer_head)=96 bytes
- sizeof(skbuff)=248 bytes
- Initializing CPU#7
- migration_cost=13
- checking if image is initramfs... it is
- Grant table initialized
- NET: Registered protocol family 16
- PCI: Not using MMCONFIG.
- PCI: Using configuration type 1
- ACPI: Interpreter disabled.
- Linux Plug and Play Support v0.97 (c) Adam Belay
- pnp: PnP ACPI: disabled
- xen_mem: Initialising balloon driver.
- usbcore: registered new driver usbfs
- usbcore: registered new driver hub
- PCI: Probing PCI hardware
- PCI: Probing PCI hardware (bus 00)
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
- PCI: Transparent bridge - 0000:00:1e.0
- PCI: Discovered primary peer bus 05 [IRQ]
- PCI: Using IRQ router PIIX/ICH [8086/3a16] at 0000:00:1f.0
- PCI->APIC IRQ transform: 0000:00:1a.0[A] -> IRQ 16
- PCI->APIC IRQ transform: 0000:00:1a.1[B] -> IRQ 21
- PCI->APIC IRQ transform: 0000:00:1a.2[D] -> IRQ 19
- PCI->APIC IRQ transform: 0000:00:1a.7[C] -> IRQ 18
- PCI->APIC IRQ transform: 0000:00:1c.0[A] -> IRQ 17
- PCI->APIC IRQ transform: 0000:00:1c.4[A] -> IRQ 17
- PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 23
- PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19
- PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18
- PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 23
- PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 19
- PCI->APIC IRQ transform: 0000:00:1f.3[C] -> IRQ 18
- PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 16
- PCI->APIC IRQ transform: 0000:02:00.1[B] -> IRQ 17
- PCI->APIC IRQ transform: 0000:06:00.0[A] -> IRQ 16
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- PCI: Bridge: 0000:00:01.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:03.0
- IO window: c000-cfff
- MEM window: fbc00000-fbcfffff
- PREFETCH window 0x00000000d0000000-0x00000000dfffffff
- PCI: Bridge: 0000:00:07.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1c.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1c.4
- IO window: e000-efff
- MEM window: fbe00000-fbefffff
- PREFETCH window 0x00000000faf00000-0x00000000faffffff
- PCI: Bridge: 0000:00:1e.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Setting latency timer of device 0000:00:01.0 to 64
- PCI: Setting latency timer of device 0000:00:03.0 to 64
- PCI: Setting latency timer of device 0000:00:07.0 to 64
- PCI: Setting latency timer of device 0000:00:1c.0 to 64
- PCI: Setting latency timer of device 0000:00:1c.4 to 64
- PCI: Setting latency timer of device 0000:00:1e.0 to 64
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
- TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- audit: initializing netlink socket (disabled)
- type=2000 audit(1329565874.260:1): initialized
- VFS: Disk quotas dquot_6.5.1
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- SELinux: Registering netfilter hooks
- Initializing Cryptographic API
- alg: No test for crc32c (crc32c-generic)
- ksign: Installing public key data
- Loading keyring
- - Added public key 1908C980DFCDBD44
- - User ID: CentOS (Kernel Module GPG key)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
- Boot video device is 0000:02:00.0
- PCI: Setting latency timer of device 0000:00:01.0 to 64
- PCI: Setting latency timer of device 0000:00:03.0 to 64
- PCI: Setting latency timer of device 0000:00:07.0 to 64
- PCI: Setting latency timer of device 0000:00:1c.0 to 64
- PCI: Setting latency timer of device 0000:00:1c.4 to 64
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- Real Time Clock Driver v1.12ac
- Non-volatile memory driver v1.2
- Linux agpgart interface v0.101 (c) Dave Jones
- brd: module loaded
- Xen virtual console successfully installed as ttyS0
- Event-channel device installed.
- Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
- ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
- Probing IDE interface ide0...
- Probing IDE interface ide1...
- ide-floppy driver 0.99.newide
- usbcore: registered new driver hiddev
- usbcore: registered new driver usbhid
- drivers/usb/input/hid-core.c: v2.6:USB HID core driver
- PNP: No PS/2 controller found. Probing ports directly.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
- md: bitmap version 4.39
- TCP bic registered
- Initializing IPsec netlink socket
- NET: Registered protocol family 1
- NET: Registered protocol family 17
- Initalizing network drop monitor service
- Write protecting the kernel read-only data: 501k
- input: AT Translated Set 2 keyboard as /class/input/input0
- PCI: Setting latency timer of device 0000:00:1a.7 to 64
- ehci_hcd 0000:00:1a.7: EHCI Host Controller
- ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1a.7: debug port 1
- PCI: cache line size of 32 is not supported by device 0000:00:1a.7
- ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbbfe000
- ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 6 ports detected
- PCI: Setting latency timer of device 0000:00:1d.7 to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- ehci_hcd 0000:00:1d.7: debug port 1
- PCI: cache line size of 32 is not supported by device 0000:00:1d.7
- ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbbfc000
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- usb usb2: configuration #1 chosen from 1 choice
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 6 ports detected
- ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
- USB Universal Host Controller Interface driver v3.0
- PCI: Setting latency timer of device 0000:00:1a.0 to 64
- uhci_hcd 0000:00:1a.0: UHCI Host Controller
- uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
- usb usb3: configuration #1 chosen from 1 choice
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- PCI: Setting latency timer of device 0000:00:1a.1 to 64
- uhci_hcd 0000:00:1a.1: UHCI Host Controller
- uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
- usb usb4: configuration #1 chosen from 1 choice
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- PCI: Setting latency timer of device 0000:00:1a.2 to 64
- uhci_hcd 0000:00:1a.2: UHCI Host Controller
- uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
- usb usb5: configuration #1 chosen from 1 choice
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- PCI: Setting latency timer of device 0000:00:1d.0 to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
- uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
- usb usb6: configuration #1 chosen from 1 choice
- hub 6-0:1.0: USB hub found
- hub 6-0:1.0: 2 ports detected
- PCI: Setting latency timer of device 0000:00:1d.1 to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
- uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
- usb usb7: configuration #1 chosen from 1 choice
- hub 7-0:1.0: USB hub found
- hub 7-0:1.0: 2 ports detected
- PCI: Setting latency timer of device 0000:00:1d.2 to 64
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
- uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
- usb usb8: configuration #1 chosen from 1 choice
- hub 8-0:1.0: USB hub found
- hub 8-0:1.0: 2 ports detected
- md: raid1 personality registered for level 1
- SCSI subsystem initialized
- libata version 3.00 loaded.
- ahci 0000:00:1f.2: version 3.0
- ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
- ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems
- PCI: Setting latency timer of device 0000:00:1f.2 to 64
- scsi0 : ahci
- scsi1 : ahci
- scsi2 : ahci
- scsi3 : ahci
- scsi4 : ahci
- scsi5 : ahci
- ata1: SATA max UDMA/133 abar m2048@0xfbbfa000 port 0xfbbfa100 irq 250
- ata2: SATA max UDMA/133 abar m2048@0xfbbfa000 port 0xfbbfa180 irq 250
- ata3: SATA max UDMA/133 abar m2048@0xfbbfa000 port 0xfbbfa200 irq 250
- ata4: SATA max UDMA/133 abar m2048@0xfbbfa000 port 0xfbbfa280 irq 250
- ata5: SATA max UDMA/133 abar m2048@0xfbbfa000 port 0xfbbfa300 irq 250
- ata6: SATA max UDMA/133 abar m2048@0xfbbfa000 port 0xfbbfa380 irq 250
- ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata1.00: ATA-8: WDC WD7500AALX-009BA0, 15.01H15, max UDMA/133
- ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- ata1.00: configured for UDMA/133
- ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata2.00: ATA-8: WDC WD7500AALX-009BA0, 15.01H15, max UDMA/133
- ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- ata2.00: configured for UDMA/133
- ata3: SATA link down (SStatus 0 SControl 300)
- ata4: SATA link down (SStatus 0 SControl 300)
- ata5: SATA link down (SStatus 0 SControl 300)
- ata6: SATA link down (SStatus 0 SControl 300)
- Vendor: ATA Model: WDC WD7500AALX-0 Rev: 15.0
- Type: Direct-Access ANSI SCSI revision: 05
- SCSI device sda: 1465149168 512-byte hdwr sectors (750156 MB)
- sda: Write Protect is off
- sda: Mode Sense: 00 3a 00 00
- SCSI device sda: drive cache: write back
- SCSI device sda: 1465149168 512-byte hdwr sectors (750156 MB)
- sda: Write Protect is off
- sda: Mode Sense: 00 3a 00 00
- SCSI device sda: drive cache: write back
- sda: sda1 sda2 sda3
- sd 0:0:0:0: Attached scsi disk sda
- Vendor: ATA Model: WDC WD7500AALX-0 Rev: 15.0
- Type: Direct-Access ANSI SCSI revision: 05
- SCSI device sdb: 1465149168 512-byte hdwr sectors (750156 MB)
- sdb: Write Protect is off
- sdb: Mode Sense: 00 3a 00 00
- SCSI device sdb: drive cache: write back
- SCSI device sdb: 1465149168 512-byte hdwr sectors (750156 MB)
- sdb: Write Protect is off
- sdb: Mode Sense: 00 3a 00 00
- SCSI device sdb: drive cache: write back
- sdb: sdb1 sdb2 sdb3
- sd 1:0:0:0: Attached scsi disk sdb
- 3ware Storage Controller device driver for Linux v1.26.03.000-2.6.18RH.
- 3ware 9000 Storage Controller device driver for Linux v2.26.08.007-2.6.18RH.
- Adaptec aacraid driver 1.1-5[24702]
- md: raid0 personality registered for level 0
- raid5: automatically using best checksumming function: generic_sse
- generic_sse: 8685.000 MB/sec
- raid5: using function: generic_sse (8685.000 MB/sec)
- raid6: int64x1 3124 MB/s
- raid6: int64x2 3672 MB/s
- raid6: int64x4 2876 MB/s
- raid6: int64x8 2656 MB/s
- raid6: sse2x1 6768 MB/s
- raid6: sse2x2 7788 MB/s
- raid6: sse2x4 8872 MB/s
- raid6: using algorithm sse2x4 (8872 MB/s)
- md: raid6 personality registered for level 6
- md: raid5 personality registered for level 5
- md: raid4 personality registered for level 4
- md: raid10 personality registered for level 10
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
- device-mapper: dm-raid45: initialized v0.2594l
- md: Autodetecting RAID arrays.
- md: autorun ...
- md: considering sdb3 ...
- md: adding sdb3 ...
- md: sdb2 has different UUID to sdb3
- md: sdb1 has different UUID to sdb3
- md: adding sda3 ...
- md: sda2 has different UUID to sdb3
- md: sda1 has different UUID to sdb3
- md: created md2
- md: bind<sda3>
- md: bind<sdb3>
- md: running: <sdb3><sda3>
- md: md2: raid array is not clean -- starting background reconstruction
- raid1: raid set md2 active with 2 out of 2 mirrors
- md: considering sdb2 ...
- md: syncing RAID array md2
- md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
- md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reconstruction.
- md: using 128k window, over a total of 670183360 blocks.
- md: adding sdb2 ...
- md: sdb1 has different UUID to sdb2
- md: adding sda2 ...
- md: sda1 has different UUID to sdb2
- md: created md1
- md: bind<sda2>
- md: bind<sdb2>
- md: running: <sdb2><sda2>
- md: md1: raid array is not clean -- starting background reconstruction
- raid1: raid set md1 active with 2 out of 2 mirrors
- md: considering sdb1 ...
- md: delaying resync of md1 until md2 has finished resync (they share one or more physical units)
- md: adding sdb1 ...
- md: adding sda1 ...
- md: created md0
- md: bind<sda1>
- md: bind<sdb1>
- md: running: <sdb1><sda1>
- raid1: raid set md0 active with 2 out of 2 mirrors
- md: ... autorun DONE.
- EXT4-fs (dm-2): INFO: recovery required on readonly filesystem
- EXT4-fs (dm-2): write access will be enabled during recovery
- EXT4-fs (dm-2): recovery complete
- EXT4-fs (dm-2): mounted filesystem with ordered data mode
- SELinux: Disabled at runtime.
- SELinux: Unregistering netfilter hooks
- type=1404 audit(1329565914.118:2): selinux=0 auid=4294967295 ses=4294967295
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- sd 1:0:0:0: Attached scsi generic sg1 type 0
- shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- input: PC Speaker as /class/input/input1
- r8169 Gigabit Ethernet driver 2.3LK-1-NAPI loaded
- PCI: Setting latency timer of device 0000:06:00.0 to 64
- eth0: RTL8168c/8111c at 0xffffc20000038000, 8c:89:xx:xx:xx:xx, XID 1c4000c0 IRQ 249
- PCI: Setting latency timer of device 0000:02:00.1 to 64
- floppy0: no floppy controllers found
- work still pending
- lp: driver loaded but no devices found
- md: Autodetecting RAID arrays.
- md: autorun ...
- md: ... autorun DONE.
- device-mapper: multipath: version 1.0.6 loaded
- loop: loaded (max 8 devices)
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on md0, internal journal
- EXT3-fs: recovery complete.
- EXT3-fs: mounted filesystem with ordered data mode.
- EXT4-fs (dm-1): recovery complete
- EXT4-fs (dm-1): mounted filesystem with ordered data mode
- Adding 4194296k swap on /dev/host/swap. Priority:-1 extents:1 across:4194296k
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement