API tools faq
paste
Advertisement
Guest User

nsa310tdc

a guest
Nov 29th, 2011
159
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 29.74 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.11.29 20:20:52 =~=~=~=~=~=~=~=~=~=~=~=
  2. þ
  3. __ __ _ _
  4. | \/ | __ _ _ ____ _____| | |
  5. | |\/| |/ _` | '__\ \ / / _ \ | |
  6. | | | | (_| | | \ V / __/ | |
  7. |_| |_|\__,_|_| \_/ \___|_|_|
  8. _ _ ____ _
  9. | | | | | __ ) ___ ___ | |_
  10. | | | |___| _ \ / _ \ / _ \| __|
  11. | |_| |___| |_) | (_) | (_) | |_
  12. \___/ |____/ \___/ \___/ \__|
  13. ** MARVELL BOARD: RD-88F6281A LE
  14.  
  15. U-Boot 1.1.4 (Feb 22 2011 - 10:31:35) Marvell version: 3.4.19
  16.  
  17. U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFEE0
  18.  
  19. Soc: 88F6281 A1 (DDR2)
  20. CPU running @ 1200Mhz L2 running @ 400Mhz
  21. SysClock = 400Mhz , TClock = 200Mhz
  22.  
  23. DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
  24. DRAM CS[0] base 0x00000000 size 256MB
  25. DRAM Total size 256MB 16bit width
  26. Addresses 10M - 0M are saved for the U-Boot usage.
  27. Mem malloc Initialization (10M - 7M): Done
  28. NAND:128 MB
  29. Flash: 0 kB
  30.  
  31. CPU : Marvell Feroceon (Rev 1)
  32. Kernel address is 0xc80000.
  33.  
  34. Streaming disabled
  35. Write allocate disabled
  36.  
  37. Module 0 is RGMII
  38. Module 1 is TDM
  39.  
  40. USB 0: host mode
  41. PEX 0: PCI Express Root Complex Interface
  42. PEX interface detected Link X1
  43. Net: egiga0, egiga1 [PRIME]
  44. Hit any key to stop autoboot: 2  1  0
  45.  
  46. NAND read: device 0 offset 0xc80000, size 0xa00000
  47.  
  48.  
  49. Reading data from 0xc80000 -- 0% complete.
  50. Reading data from 0xc99800 -- 1% complete.
  51. Reading data from 0xcb3000 -- 2% complete.
  52. Reading data from 0xccc800 -- 3% complete.
  53. Reading data from 0xce6000 -- 4% complete.
  54. Reading data from 0xcff800 -- 5% complete.
  55. Reading data from 0xd19800 -- 6% complete.
  56. Reading data from 0xd33000 -- 7% complete.
  57. Reading data from 0xd4c800 -- 8% complete.
  58. Reading data from 0xd66000 -- 9% complete.
  59. Reading data from 0xd7f800 -- 10% complete.
  60. Reading data from 0xd99800 -- 11% complete.
  61. Reading data from 0xdb3000 -- 12% complete.
  62. Reading data from 0xdcc800 -- 13% complete.
  63. Reading data from 0xde6000 -- 14% complete.
  64. Reading data from 0xdff800 -- 15% complete.
  65. Reading data from 0xe19800 -- 16% complete.
  66. Reading data from 0xe33000 -- 17% complete.
  67. Reading data from 0xe4c800 -- 18% complete.
  68. Reading data from 0xe66000 -- 19% complete.
  69. Reading data from 0xe7f800 -- 20% complete.
  70. Reading data from 0xe99800 -- 21% complete.
  71. Reading data from 0xeb3000 -- 22% complete.
  72. Reading data from 0xecc800 -- 23% complete.
  73. Reading data from 0xee6000 -- 24% complete.
  74. Reading data from 0xeff800 -- 25% complete.
  75. Reading data from 0xf19800 -- 26% complete.
  76. Reading data from 0xf33000 -- 27% complete.
  77. Reading data from 0xf4c800 -- 28% complete.
  78. Reading data from 0xf66000 -- 29% complete.
  79. Reading data from 0xf7f800 -- 30% complete.
  80. Reading data from 0xf99800 -- 31% complete.
  81. Reading data from 0xfb3000 -- 32% complete.
  82. Reading data from 0xfcc800 -- 33% complete.
  83. Reading data from 0xfe6000 -- 34% complete.
  84. Reading data from 0xfff800 -- 35% complete.
  85. Reading data from 0x1019800 -- 36% complete.
  86. Reading data from 0x1033000 -- 37% complete.
  87. Reading data from 0x104c800 -- 38% complete.
  88. Reading data from 0x1066000 -- 39% complete.
  89. Reading data from 0x107f800 -- 40% complete.
  90. Reading data from 0x1099800 -- 41% complete.
  91. Reading data from 0x10b3000 -- 42% complete.
  92. Reading data from 0x10cc800 -- 43% complete.
  93. Reading data from 0x10e6000 -- 44% complete.
  94. Reading data from 0x10ff800 -- 45% complete.
  95. Reading data from 0x1119800 -- 46% complete.
  96. Reading data from 0x1133000 -- 47% complete.
  97. Reading data from 0x114c800 -- 48% complete.
  98. Reading data from 0x1166000 -- 49% complete.
  99. Reading data from 0x117f800 -- 50% complete.
  100. Reading data from 0x1199800 -- 51% complete.
  101. Reading data from 0x11b3000 -- 52% complete.
  102. Reading data from 0x11cc800 -- 53% complete.
  103. Reading data from 0x11e6000 -- 54% complete.
  104. Reading data from 0x11ff800 -- 55% complete.
  105. Reading data from 0x1219800 -- 56% complete.
  106. Reading data from 0x1233000 -- 57% complete.
  107. Reading data from 0x124c800 -- 58% complete.
  108. Reading data from 0x1266000 -- 59% complete.
  109. Reading data from 0x127f800 -- 60% complete.
  110. Reading data from 0x1299800 -- 61% complete.
  111. Reading data from 0x12b3000 -- 62% complete.
  112. Reading data from 0x12cc800 -- 63% complete.
  113. Reading data from 0x12e6000 -- 64% complete.
  114. Reading data from 0x12ff800 -- 65% complete.
  115. Reading data from 0x1319800 -- 66% complete.
  116. Reading data from 0x1333000 -- 67% complete.
  117. Reading data from 0x134c800 -- 68% complete.
  118. Reading data from 0x1366000 -- 69% complete.
  119. Reading data from 0x137f800 -- 70% complete.
  120. Reading data from 0x1399800 -- 71% complete.
  121. Reading data from 0x13b3000 -- 72% complete.
  122. Reading data from 0x13cc800 -- 73% complete.
  123. Reading data from 0x13e6000 -- 74% complete.
  124. Reading data from 0x13ff800 -- 75% complete.
  125. Reading data from 0x1419800 -- 76% complete.
  126. Reading data from 0x1433000 -- 77% complete.
  127. Reading data from 0x144c800 -- 78% complete.
  128. Reading data from 0x1466000 -- 79% complete.
  129. Reading data from 0x147f800 -- 80% complete.
  130. Reading data from 0x1499800 -- 81% complete.
  131. Reading data from 0x14b3000 -- 82% complete.
  132. Reading data from 0x14cc800 -- 83% complete.
  133. Reading data from 0x14e6000 -- 84% complete.
  134. Reading data from 0x14ff800 -- 85% complete.
  135. Reading data from 0x1519800 -- 86% complete.
  136. Reading data from 0x1533000 -- 87% complete.
  137. Reading data from 0x154c800 -- 88% complete.
  138. Reading data from 0x1566000 -- 89% complete.
  139. Reading data from 0x157f800 -- 90% complete.
  140. Reading data from 0x1599800 -- 91% complete.
  141. Reading data from 0x15b3000 -- 92% complete.
  142. Reading data from 0x15cc800 -- 93% complete.
  143. Reading data from 0x15e6000 -- 94% complete.
  144. Reading data from 0x15ff800 -- 95% complete.
  145. Reading data from 0x1619800 -- 96% complete.
  146. Reading data from 0x1633000 -- 97% complete.
  147. Reading data from 0x164c800 -- 98% complete.
  148. Reading data from 0x1666000 -- 99% complete.
  149. Reading data from 0x167f800 -- 100% complete.
  150. 10485760 bytes read: OK
  151. ## Booting image at 02000000 ...
  152. Image Name: Linux-2.6.22.18
  153. Created: 2011-02-22 3:33:51 UTC
  154. Image Type: ARM Linux Kernel Image (uncompressed)
  155. Data Size: 5701144 Bytes = 5.4 MB
  156. Load Address: 00008000
  157. Entry Point: 00008000
  158. Verifying Checksum ... OK
  159. OK
  160.  
  161. Starting kernel ...
  162.  
  163. Uncompressing Linux..................................................................................................................................................................................................................................................................... done, booting the kernel.
  164.  
  165. Linux version 2.6.22.18 (root@Neo) (gcc version 3.4.3 (MontaVista 3.4.3-25.0.70.0501961 2005-12-18)) #2 Tue Feb 22 11:33:29 CST 2011
  166. CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053977
  167. Machine: Feroceon-KW
  168. Using UBoot passing parameters structure
  169. Memory policy: ECC disabled, Data cache writeback
  170. CPU0: D VIVT write-back cache
  171. CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
  172. CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
  173. Built 1 zonelists. Total pages: 65024
  174. Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) root=/dev/nfs rw init=/init
  175. PID hash table entries: 1024 (order: 10, 4096 bytes)
  176. Console: colour dummy device 80x30
  177. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  178. Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  179. Memory: 256MB 0MB 0MB 0MB = 256MB total
  180. Memory: 251392KB available (4832K code, 403K data, 3116K init)
  181. Mount-cache hash table entries: 512
  182. CPU: Testing write buffer coherency: ok
  183. NET: Registered protocol family 16
  184.  
  185. CPU Interface
  186. -------------
  187. SDRAM_CS0 ....base 00000000, size 256MB
  188. SDRAM_CS1 ....disable
  189. SDRAM_CS2 ....disable
  190. SDRAM_CS3 ....disable
  191. PEX0_MEM ....base e8000000, size 128MB
  192. PEX0_IO ....base f2000000, size 1MB
  193. INTER_REGS ....base f1000000, size 1MB
  194. NFLASH_CS ....base fa000000, size 2MB
  195. SPI_CS ....base f4000000, size 16MB
  196. BOOT_ROM_CS ....no such
  197. DEV_BOOTCS ....no such
  198. CRYPT_ENG ....base f0000000, size 2MB
  199.  
  200. Marvell Development Board (LSP Version KW_LSP_4.2.7)-- RD-88F6281A Soc: MV88F6281 Rev 3 LE
  201.  
  202. Detected Tclk 200000000 and SysClk 400000000
  203. Marvell USB EHCI Host controller #0: c0a9a600
  204. PEX0 interface detected Link X1
  205. PCI: bus0: Fast back to back transfers disabled
  206. SCSI subsystem initialized
  207. usbcore: registered new interface driver usbfs
  208. usbcore: registered new interface driver hub
  209. usbcore: registered new device driver usb
  210. NET: Registered protocol family 2
  211. Time: kw_clocksource clocksource has been installed.
  212. IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  213. TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  214. TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  215. TCP: Hash tables configured (established 8192 bind 8192)
  216. TCP reno registered
  217. RTC registered
  218. Use the XOR engines (acceleration) for enhancing the following functions:
  219. o RAID 5 Xor calculation
  220. o kernel memcpy
  221. o kenrel memzero
  222. Number of XOR engines to use: 4
  223. cesadev_init(c0011f5c)
  224. mvCesaInit: sessions=640, queue=64, pSram=f0000000
  225. Warning: TS unit is powered off.
  226. gpio_dev = fe00000
  227. LED_SET_CTL_IOC_NUM= 6702
  228. High gpio polarity = 50
  229. High gpio polarity = 70
  230. Enable Interrupt
  231. mv88f6281_wdt: Watchdog Timer timeout = 8 sec.
  232. mv88f6281_wdt: HW Watchdog timeout = 15 sec.
  233. VFS: Disk quotas dquot_6.5.1
  234. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  235. Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  236. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  237. fuse init (API version 7.8)
  238. SGI XFS with large block numbers, no debug enabled
  239. SGI XFS Quota Management subsystem
  240. yaffs Feb 10 2011 21:07:53 Installing.
  241. io scheduler noop registered
  242. io scheduler cfq registered (default)
  243. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
  244. serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
  245. serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A
  246. RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
  247. loop: module loaded
  248. Loading Marvell Ethernet Driver:
  249. o Cached descriptors in DRAM
  250. o DRAM SW cache-coherency
  251. o Single RX Queue support - ETH_DEF_RXQ=0
  252. o Single TX Queue support - ETH_DEF_TXQ=0
  253. o TCP segmentation offload enabled
  254. o Receive checksum offload enabled
  255. o Transmit checksum offload enabled
  256. o Network Fast Processing (Routing) supported
  257. o Proc tool API enabled
  258. o Rx descripors: q0=128
  259. o Tx descripors: q0=532
  260. o Loading network interface(s):
  261. eth_get_config: Unexpected port number 0
  262. EthPort #0: Bad initialization parameters
  263. eth port=0: load failed
  264. eth_init_module: can't init eth_hal driver
  265. Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
  266. Copyright (c) 1999-2006 Intel Corporation.
  267. e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
  268. e100: Copyright(c) 1999-2006 Intel Corporation
  269. Integrated Sata device found
  270. scsi0 : Marvell SCSI to SATA adapter
  271. scsi1 : Marvell SCSI to SATA adapter
  272. scsi 0:0:0:0: Direct-Access WDC WD5000AAKX-221CA 15.0 PQ: 0 ANSI: 5
  273. EnablePowerSaving
  274. PowerSavingTime = 15
  275. /////////////////////////////////// init sd
  276. sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
  277. sd 0:0:0:0: [sda] Write Protect is off
  278. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  279. sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
  280. sd 0:0:0:0: [sda] Write Protect is off
  281. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  282. sda: sda1 sda2
  283. sd 0:0:0:0: [sda] Attached SCSI disk
  284. sd 0:0:0:0: Attached scsi generic sg0 type 0
  285. NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
  286. NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
  287. Scanning device for bad blocks
  288. Bad eraseblock 2 at 0x00040000
  289. Bad eraseblock 3 at 0x00060000
  290. Bad eraseblock 635 at 0x04f60000
  291. 9 cmdlinepart partitions found on MTD device nand_mtd
  292. Using command line partition definition
  293. Creating 9 MTD partitions on "nand_mtd":
  294. 0x00000000-0x00100000 : "uboot"
  295. 0x00100000-0x00180000 : "uboot_env"
  296. 0x00180000-0x00200000 : "key_store"
  297. 0x00200000-0x00280000 : "info"
  298. 0x00280000-0x00c80000 : "etc"
  299. 0x00c80000-0x01680000 : "kernel_1"
  300. 0x01680000-0x04640000 : "rootfs1"
  301. 0x04640000-0x05040000 : "kernel_2"
  302. 0x05040000-0x08000000 : "rootfs2"
  303. ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
  304. ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
  305. ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
  306. ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  307. usb usb1: configuration #1 chosen from 1 choice
  308. hub 1-0:1.0: USB hub found
  309. hub 1-0:1.0: 1 port detected
  310. USB Universal Host Controller Interface driver v3.0
  311. usb 1-1: new high speed USB device using ehci_marvell and address 2
  312. In hub_port_init, and number is 0, retry 0, port 1 .....
  313. usb 1-1: configuration #1 chosen from 1 choice
  314. hub 1-1:1.0: USB hub found
  315. hub 1-1:1.0: 4 ports detected
  316. usbcore: registered new interface driver usblp
  317. drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
  318. Initializing USB Mass Storage driver...
  319. usbcore: registered new interface driver usb-storage
  320. USB Mass Storage support registered.
  321. mice: PS/2 mouse device common for all mice
  322. i2c /dev entries driver
  323. i2c-adapter i2c-0: Unrecognized version/stepping 0x69 Defaulting to Generic LM85.
  324. hwmon-vid: Unknown VRM version of your CPU
  325. md: linear personality registered for level -1
  326. md: raid0 personality registered for level 0
  327. md: raid1 personality registered for level 1
  328. raid6: int32x1 95 MB/s
  329. raid6: int32x2 138 MB/s
  330. raid6: int32x4 125 MB/s
  331. raid6: int32x8 111 MB/s
  332. raid6: using algorithm int32x2 (138 MB/s)
  333. md: raid6 personality registered for level 6
  334. md: raid5 personality registered for level 5
  335. md: raid4 personality registered for level 4
  336. raid5: measuring checksumming speed
  337. arm4regs : 1090.800 MB/sec
  338. 8regs : 653.600 MB/sec
  339. 32regs : 884.400 MB/sec
  340. raid5: using function: arm4regs (1090.800 MB/sec)
  341. device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
  342. usbcore: registered new interface driver hiddev
  343. usbcore: registered new interface driver usbhid
  344. drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
  345. TCP cubic registered
  346. NET: Registered protocol family 1
  347. NET: Registered protocol family 17
  348. Freeing init memory: 3116K
  349. *** Stage 1: Setup system and device drivers ***
  350. r8168 Gigabit Ethernet driver 8.012.00-NAPI loaded
  351. pci_resource_start(pdev, 2) = e8014000
  352. r8168 0000:00:01.0: no MSI. Back to INTx.
  353. Set LED ...
  354. r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
  355. eth0: RTL8168B/8111B at 0xd0854000, 00:00:00:00:00:30, IRQ 9
  356. ioaddr = d0854000
  357. r8168 Copyright (C) 2009 Realtek NIC software team <nicfae@realtek.com>
  358. This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
  359. This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
  360. r8168: egiga0: link down
  361. *** Stage 2: Prepare the root file system ***
  362. Mount system partition...
  363. yaffs: dev is 32505862 name is "mtdblock6"
  364. yaffs: passed flags ""
  365. yaffs: Attempting MTD mount on 31.6, "mtdblock6"
  366. yaffs_read_super: isCheckpointed 0
  367. e2fsck 1.38 (30-Jun-2005)
  368. /dev/sda1: clean, 13/128520 files, 156045/514048 blocks
  369. kjournald starting. Commit interval 5 seconds
  370. EXT3-fs: mounted filesystem with ordered data mode.
  371. kjournald starting. Commit interval 5 seconds
  372. EXT3-fs: mounted filesystem with ordered data mode.
  373. /dev/sda1 /zyxel/mnt/sysdisk ext3 ro,data=ordered 0 0
  374. 0
  375. Boot from disk
  376. r8168: egiga0: link up
  377. r8168: egiga0: link up
  378. Checksum of sysdisk.img : 7c05f546799454bf4ae08d4a3bdd9664
  379. Checksum from INFO : 7ddf39bd27e18147c31a7d325e5acc98
  380. Checksum pass!
  381. EXT3 FS on sda1, internal journal
  382. Mount system disk image ...
  383. cp: /ram_bin/bin/*: No such file or directory
  384. yaffs: dev is 32505860 name is "mtdblock4"
  385. yaffs: passed flags ""
  386. yaffs: Attempting MTD mount on 31.4, "mtdblock4"
  387. yaffs: restored from checkpoint
  388. yaffs_read_super: isCheckpointed 1
  389. /etc/zyxel/conf exist..
  390. Start rcS2 of ZyXEL style
  391. *** Stage 3: Start services on HDD ***
  392. NTFS driver 2.1.28 [Flags: R/O MODULE].
  393. tntfs: module license 'Commercial' taints kernel.
  394. Tuxera NTFS driver 3010.6.16 [Flags: R/W MODULE].
  395. PPP generic driver version 2.4.2
  396. PPP MPPE Compression module registered
  397. ppp_async: Unknown symbol crc_ccitt_table
  398. insmod: cannot insert `/lib/modules/2.6.22.18/kernel/drivers/net/ppp_async.ko': Unknown symbol in module (-1): No such file or directory
  399. PPP Deflate Compression module registered
  400. NET: Registered protocol family 24
  401. PPP BSD Compression module registered
  402. modprobe: module fuse not found.
  403. modprobe: failed to load module fuse
  404. Starting PID Fan Control..
  405. P:20, I:1, D:5, SampleRate:10 seconds, ST_CPU:46, ST_ADT7463:46, ST_DauBoard:46
  406. Wt_CPU:0, Wt_ADT7463:0, Wt_DauBoard:1
  407. Tolerance:1 MinPwm:0x40
  408.  
  409. sda
  410. checking sda
  411. Trying to mount /dev/sda1
  412. Press ENTER to continue...
  413. Starting zylogd...
  414. zylog starts.
  415. Starting uamd...
  416. Starting ZySH daemon and client...
  417. Start NSA-220 system daemon....
  418. Start ZySH daemon
  419. zyshd: version 2.0.0 (build: 11:39:50 Aug 19 2010)
  420. % zylog init start
  421. cat: /var/run/syslog-ng.pid: No such file or directory
  422. Try to KILL SIGHUP to syslog-ng: pid=0
  423. syslog-ng not running, start /usr/sbin/syslog-ng
  424. Nov 29 19:21:34 (none) syslog-ng[1153]: syslog-ng starting up; version='2.0.10'
  425. zyio_open_config success. (/etc/__system_default.xml, 0)
  426. zyio_open_config success. (/etc/zyxel/conf/__system_default_device_ha.xml, 0)
  427. /usr/sbin/zic -d /etc /var/zyxel/myzone_rule
  428. /bin/ln -s -f /etc/MyZone /etc/localtime
  429. /bin/hostname HomeDisk
  430. Usage: umount [-hV]
  431. umount -a [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]
  432. umount [-f] [-F] [-r] [-n] [-v] special | node...
  433. Usage: umount [-hV]
  434. umount -a [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]
  435. umount [-f] [-F] [-r] [-n] [-v] special | node...
  436. BusyBox v1.1.1 (2011.01.26-03:51+0000) multi-call binary
  437.  
  438. Usage: rmdir [OPTION]... DIRECTORY...
  439.  
  440. Init SMB DB access...
  441. rm: cannot remove `/var/log/samba/smb.db': No such file or directory
  442. zyio_container_create_template(/etc/__system_default.xml): scope:[network/wlan] list:[wlan_list] type:[wlan_t] is not existed
  443. Assemble volume....
  444. [1195] server write-only FIFO is opened (fd=6)
  445. [1195] server read-only FIFO is opened (fd=7)
  446. [1195] server error read-only FIFO is opened (fd=8)
  447. argc = 1, func = 276
  448. md: md0 stopped.
  449. md: bind<sda2>
  450. cat: /tmp/mduuid.map: No such file or directory
  451. Filesystem "md0": Disabling barriers, not supported by the underlying device
  452. XFS mounting filesystem md0
  453. Startup config
  454. POLLHUP on 7
  455. pid = 1195
  456. [1195] is disconnected
  457. [1260] server write-only FIFO is opened (fd=6)
  458. [1260] server read-only FIFO is opened (fd=7)
  459. [1260] server error read-only FIFO is opened (fd=8)
  460. argc = 1, func = 14
  461. argc = 1, func = 17
  462. argc = 1, func = 638
  463. argc = 2, func = 104
  464. argid[1]: 1059; argv[1]: ge1
  465. argc = 6, func = 108
  466. argid[1]: 1059; argv[1]: ge1
  467. argid[2]: 313; argv[2]: ip
  468. argid[3]: 434; argv[3]: address
  469. argid[4]: 1052; argv[4]: 192.168.1.5
  470. argid[5]: 1052; argv[5]: 255.255.255.0
  471. argc = 5, func = 109
  472. argid[1]: 1059; argv[1]: ge1
  473. argid[2]: 313; argv[2]: ip
  474. argid[3]: 542; argv[3]: gateway
  475. argid[4]: 1052; argv[4]: 192.168.1.1
  476. argc = 4, func = 106
  477. argid[1]: 1059; argv[1]: ge1
  478. argid[2]: 540; argv[2]: mtu
  479. argid[3]: 1375; argv[3]: 1500
  480. argc = 3, func = 105
  481. argid[1]: 1059; argv[1]: ge1
  482. argid[2]: 350; argv[2]: exit
  483. argc = 2, func = 418
  484. argid[1]: 1052; argv[1]: 192.168.1.1
  485. argc = 4, func = 420
  486. argid[1]: 857; argv[1]: fetch
  487. argid[2]: 858; argv[2]: manually
  488. argid[3]: 1059; argv[3]: ge1
  489. /bin/rm -f /var/zyxel/zysh/egiga0.metric
  490. argc = 7, func = 77
  491. argid[1]: 267; argv[1]: mail
  492. argid[2]: 1368; argv[2]: 1
  493. argid[3]: 435; argv[3]: category
  494. argid[4]: 375; argv[4]: all
  495. argid[5]: 461; argv[5]: level
  496. argid[6]: 478; argv[6]: alert
  497. mail server '1' log_category(all) is:alert
  498. argc = 7, func = 77
  499. argid[1]: 267; argv[1]: mail
  500. argid[2]: 1368; argv[2]: 1
  501. argid[3]: 435; argv[3]: category
  502. argid[4]: 375; argv[4]: all
  503. argid[5]: 461; argv[5]: level
  504. argid[6]: 375; argv[6]: all
  505. mail server '1' log_category(all) is:all
  506. argc = 2, func = 68
  507. argid[1]: 1051; argv[1]: ntp1.tele.dk
  508. argc = 2, func = 60
  509. argid[1]: 1102; argv[1]: +0100
  510. /usr/sbin/zic -d /etc /var/zyxel/myzone_rule
  511. /bin/ln -s -f /etc/MyZone /etc/localtime
  512. killall: crond: no process killed
  513. killall: timer_source: no process killed
  514. killall: schedule_controller: no process killed
  515. killall: timer_source: no process killed
  516. ===> Stopping crond ...
  517. ===> Starting crond ...
  518. ===> Stopping schedule_controller ...
  519. ===> Starting schedule_controller ...
  520. argc = 1, func = 72
  521. /usr/sbin/ntpdate_agent ntp1.tele.dk
  522. argc = 4, func = 340
  523. argid[1]: 1195; argv[1]: "CET"
  524. argid[2]: 592; argv[2]: in
  525. argid[3]: 1196; argv[3]: "Brussels,Copenhagen,Madrid,Paris"
  526. argc = 2, func = 192
  527. argid[1]: 1112; argv[1]: "admin"
  528. argc = 5, func = 193
  529. argid[1]: 1112; argv[1]: "admin"
  530. argid[2]: 1379; argv[2]: 501
  531. argid[3]: 363; argv[3]: password
  532. argid[4]: 1135; argv[4]: B0C6223DE05819139C5014AE4718A7EE:3F0646CDA37BF8D9478FFBC1B1B3CFA1
  533. enter smb_db_update_user
  534. argc = 5, func = 193
  535. argid[1]: 1112; argv[1]: "admin"
  536. argid[2]: 1379; argv[2]: 501
  537. argid[3]: 632; argv[3]: type
  538. argid[4]: 633; argv[4]: admin
  539. enter smb_db_update_user
  540. argc = 5, func = 194
  541. argid[1]: 1112; argv[1]: "admin"
  542. argid[2]: 1379; argv[2]: 501
  543. argid[3]: 637; argv[3]: shpass
  544. argid[4]: 1138; argv[4]: $1$$4jBn1hWDvUshaaDgZcEgs/
  545. shpass : $1$$4jBn1hWDvUshaaDgZcEgs/
  546. argc = 4, func = 189
  547. argid[1]: 1112; argv[1]: "admin"
  548. argid[2]: 1379; argv[2]: 501
  549. argid[3]: 350; argv[3]: exit
  550. argc = 6, func = 174
  551. argid[1]: 456; argv[1]: share
  552. argid[2]: 625; argv[2]: save
  553. argid[3]: 1140; argv[3]: "HomeDisk"
  554. argid[4]: 395; argv[4]: path
  555. argid[5]: 1142; argv[5]: "/i-data/md0/HomeDisk"
  556. argc = 7, func = 175
  557. argid[1]: 456; argv[1]: share
  558. argid[2]: 625; argv[2]: save
  559. argid[3]: 1140; argv[3]: "HomeDisk"
  560. argid[4]: 395; argv[4]: path
  561. argid[5]: 1142; argv[5]: "/i-data/md0/HomeDisk"
  562. argid[6]: 611; argv[6]: media-server
  563. argc = 7, func = 163
  564. argid[1]: 456; argv[1]: share
  565. argid[2]: 625; argv[2]: save
  566. argid[3]: 1140; argv[3]: "HomeDisk"
  567. argid[4]: 395; argv[4]: path
  568. argid[5]: 1142; argv[5]: "/i-data/md0/HomeDisk"
  569. argid[6]: 350; argv[6]: exit
  570. smb_share.c: editing_config lack of smb_global settings
  571. RegenSmbConfigFile:2114 Close file ok
  572. argc = 6, func = 174
  573. argid[1]: 456; argv[1]: share
  574. argid[2]: 625; argv[2]: save
  575. argid[3]: 1140; argv[3]: "admin"
  576. argid[4]: 395; argv[4]: path
  577. argid[5]: 1142; argv[5]: "/i-data/md0/admin"
  578. argc = 7, func = 163
  579. argid[1]: 456; argv[1]: share
  580. argid[2]: 625; argv[2]: save
  581. argid[3]: 1140; argv[3]: "admin"
  582. argid[4]: 395; argv[4]: path
  583. argid[5]: 1142; argv[5]: "/i-data/md0/admin"
  584. argid[6]: 350; argv[6]: exit
  585. smb_share.c: editing_config lack of smb_global settings
  586. RegenSmbConfigFile:2114 Close file ok
  587. argc = 2, func = 395
  588. argid[1]: 1209; argv[1]: default
  589. Nov 29 20:21:46 (none) ntpdate[1362]: step time server 193.162.159.194 offset 1.417863 sec
  590. argc = 2, func = 392
  591. argid[1]: 1216; argv[1]: yes
  592. argc = 1, func = 507
  593. Nov 29 20:21:52 (none) mt-daapd[1456]: Starting rendezvous daemon
  594. Nov 29 20:21:52 (none) mt-daapd[1460]: Starting signal handler
  595. Nov 29 20:21:53 (none) mt-daapd[1460]: Loading playlists
  596. Nov 29 20:21:53 (none) mt-daapd[1460]: Initializing database
  597. Nov 29 20:21:53 (none) mt-daapd[1460]: Starting mp3 scan
  598. Nov 29 20:21:53 (none) mt-daapd[1460]: Starting web server from /usr/local/apache/htdocs/zyxel on port 3689
  599. Nov 29 20:21:53 (none) mt-daapd[1460]: Registering rendezvous names
  600. Nov 29 20:21:53 (none) mt-daapd[1460]: Scanned 0 songs in 1 seconds
  601. Starting iTune SDisablePowerSaving
  602. erver:
  603. CheckTimerState = 1
  604. /i-data/md0/.zyEnablePowerSaving
  605. xel existing: /iPowerSavingTime = 15
  606. -data/md0/.zyxel exist
  607. iTunes starting OK
  608. iTunes monitor starting ok
  609. Successfully starting iTunes server!
  610. argc = 2, func = 146
  611. argid[1]: 1127; argv[1]: 15
  612. test0
  613. Test1
  614. Test2
  615. Test3:
  616. argc = 5, func = 168
  617. argid[1]: 456; argv[1]: share
  618. argid[2]: 614; argv[2]: recycle-bin
  619. argid[3]: 619; argv[3]: expireday
  620. argid[4]: 1378; argv[4]: 45
  621. argc = 2, func = 160
  622. argid[1]: 1132; argv[1]: d
  623. Error: Read failed
  624. exec_cmd complete
  625. eth status = d
  626. ethtest0
  627. Test1
  628. Test2
  629. Test3:
  630. argc = 2, func = 502
  631. argid[1]: 905; argv[1]: activate
  632. /bin/killall -USR1 app_wd
  633. killall: app_wd: no process killed
  634. argc = 2, func = 18
  635. argid[1]: 350; argv[1]: exit
  636. argc = 1, func = 20
  637. POLLHUP on 7
  638. pid = 1260
  639. [1260] is disconnected
  640. configure terminal ip smb internal enable "/i-data/md0"
  641. [1495] server write-only FIFO is opened (fd=6)
  642. [1495] server read-only FIFO is opened (fd=7)
  643. [1495] server error read-only FIFO is opened (fd=8)
  644. argc = 4, func = 180
  645. argid[1]: 629; argv[1]: internal
  646. argid[2]: 302; argv[2]: enable
  647. argid[3]: 1154; argv[3]: "/i-data/md0"
  648. smb_share.c: editing_config lack of smb_global settings
  649. RegenSmbConfigFile:2114 Close file ok
  650. POLLHUP on 7
  651. pid = 1495
  652. [1495] is disconnected
  653. Starting smbd...
  654. Starting nmbd...
  655. Starting NSU Agent...
  656. readlink: /i-data/md1: No such file or directory
  657. configure terminal ip smb internal disable "/i-data/md1"
  658. [1518] server write-only FIFO is opened (fd=6)
  659. [1518] server read-only FIFO is opened (fd=7)
  660. [1518] server error read-only FIFO is opened (fd=8)
  661. argc = 4, func = 181
  662. argid[1]: 629; argv[1]: internal
  663. argid[2]: 303; argv[2]: disable
  664. argid[3]: 1154; argv[3]: "/i-data/md1"
  665. smb_share.c: editing_config lack of smb_global settings
  666. RegenSmbConfigFile:2114 Close file ok
  667. [1518] is disconnected
  668. configure terminal ip smb internal enable "/i-data/f897e6ca"
  669. [1569] server write-only FIFO is opened (fd=6)
  670. [1569] server read-only FIFO is opened (fd=7)
  671. [1569] server error read-only FIFO is opened (fd=8)
  672. argc = 4, func = 180
  673. argid[1]: 629; argv[1]: internal
  674. argid[2]: 302; argv[2]: enable
  675. argid[3]: 1154; argv[3]: "/i-data/f897e6ca"
  676. smb_share.c: editing_config lack of smb_global settings
  677. RegenSmbConfigFile:2114 Close file ok
  678. POLLHUP on 7
  679. pid = 1569
  680. [1569] is disconnected
  681. Adding 524280k swap on /i-data/.zyxel/swap_ul6545p. Priority:-1 extents:3 across:244099264k
  682. 341+0 records in
  683. 341+0 records out
  684. Setting up swapspace version 1, size = 357560 kB
  685. GMT offset=3600s
  686. setting system time zone to tz_minuteswest=-60
  687. mknod: /dev/btncpy: File exists
  688. setLED COPY OFF
  689. led_state_map_addr = 10
  690. [1783] server write-only FIFO is opened (fd=6)
  691. [1783] server read-only FIFO is opened (fd=7)
  692. [1783] server error read-only FIFO is opened (fd=8)
  693. argc = 1, func = 19
  694. POLLHUP on 7
  695. pid = 1783
  696. [1783] is disconnected
  697. [1847] server write-only FIFO is opened (fd=6)
  698. [1847] server read-only FIFO is opened (fd=7)
  699. [1847] server error read-only FIFO is opened (fd=8)
  700. argc = 2, func = 345
  701. argid[1]: 1197; argv[1]: former
  702. Fail to enable power resume
  703. POLLHUP on 7
  704. pid = 1847
  705. [1847] is disconnected
  706. schedule_controller is already running now.
  707. Starting "/etc/init.d/zypkg_controller.sh".
  708. Starting to set up zy-pkgs environment ...
  709. cp: /etc/zyxel/zy-pkgs/*: No such file or directory
  710. du: /usr/local/zy-pkgs/tmp/zypkg.log: No such file or directory
  711. [: 10240: unknown operand
  712. Finish "/etc/init.d/zypkg_controller.sh".
  713. Starting "/etc/init.d/zypkg_controller.sh".
  714. Starting all zypkgs via "/etc/init.d/zypkg_controller.sh" ...
  715. - starting package "PHP-MySQL-phpMyAdmin" ...
  716. ---> Error: start-up program "/usr/local/zy-pkgs/etc/init.d/PHP-MySQL-phpMyAdmin" is not existed or not excutable
  717. - starting package "SqueezeCenter" ...
  718. ---> Error: start-up program "/usr/local/zy-pkgs/etc/init.d/SqueezeCenter" is not existed or not excutable
  719. - starting package "SMART" ...
  720. ---> Error: start-up program "/usr/local/zy-pkgs/etc/init.d/SMART" is not existed or not excutable
  721. /etc/init.d/zypkg_controller.sh: /etc/init.d/zypkg_controller.sh: 491: cannot open /i-data/md0/admin/zy-pkgs/USRPKG_DEPS_START: No such file
  722. Finish "/etc/init.d/zypkg_controller.sh".
  723. Starting Web Server...
  724. Nov 29 20:22:13 (none) httpd[2035]: [warn] Init: Session Cache is not configured [hint: SSLSessionCache]
  725. Nov 29 20:22:13 (none) httpd[2035]: [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
  726. Nov 29 20:22:13 (none) httpd[2035]: [warn] RSA server certificate CommonName (CN) `HomeDisk' does NOT match server name!?
  727. Nov 29 20:22:13 (none) httpd[2035]: [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
  728. Nov 29 20:22:13 (none) httpd[2035]: [warn] RSA server certificate CommonName (CN) `HomeDisk' does NOT match server name!?
  729. Nov 29 20:22:13 (none) httpd[2035]: [error] mod_auth_zyxel: initialized.
  730. Starting app_wd...
  731.  core_checksum : 60e5ac84547193df98917040f063855e
  732.  fwversion : V3.34(AFN.2)
  733.  img_checksum : 7ddf39bd27e18147c31a7d325e5acc98
  734. Nov 29 20:22:15 (none) httpd[2040]: [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
  735. Nov 29 20:22:15 (none) httpd[2040]: [warn] RSA server certificate CommonName (CN) `HomeDisk' does NOT match server name!?
  736. Nov 29 20:22:15 (none) httpd[2040]: [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
  737. Nov 29 20:22:15 (none) httpd[2040]: [warn] RSA server certificate CommonName (CN) `HomeDisk' does NOT match server name!?
  738. Nov 29 20:22:15 (none) httpd[2040]: [error] mod_auth_zyxel: initialized.
  739.  modelid : DA01
  740.  revision : 29152
  741.  romfile_checksum : 1A7D
  742.  zld_checksum : 72ff7c00ebca9f21c3129d854d47cdb7
  743. led_state_map_addr = 46
  744. Nov 29 19:22:15 (none) linuxrc: Starting pid 207
  745. HomeDisk login:
  746.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!