Guest User

Untitled

a guest
Nov 26th, 2010
119
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.68 KB | None | 0 0
  1. //
  2. // >>>> Celsius / Fahrenheit: temperatures in °C (active) / °F <<<<
  3.  
  4. // !!! Temp of lowest Level > 79 -> switch to Fahrenheit !!! see below
  5.  
  6. // ATTENTION: example temp values are for my T61, especially
  7. // BluetoothEDR=1, SensorName5=no5, IgnoreSensors=no5 too
  8. // temp levels 10 degrees centgrade higher than in T4x, R5x,
  9. // change for your purposes.
  10. // Achtung: die eingetragenen Temperaturwerte benutze ich beim T61,
  11. // speziell hier: BluetoothEDR=1, SensorName5=no5, IgnoreSensors=no5
  12. // Für T4x, R5x können die Temps 10 Grad niedriger eingetragen werden.
  13. // Bitte alles für die eigenen Zwecke anpassen.
  14.  
  15. // advice for programmers: TPFanControl must acquire mutex named
  16. // "Access_Thinkpad_EC" to get access to embedded controller
  17. // Hinweis für Programmierer: TPFanControl muss den Mutex
  18. // "Access_Thinkpad_EC" aquirieren können um Zugang zum embbeded
  19. // controller zu bekommen.
  20.  
  21. // with Active=3 & ManFanSpeed=0 & ManModeExit=78 you can have a nice
  22. // quiet time until temps reaches 78 deg. centigrade :-))
  23. // mit Active=3 & ManFanSpeed=0 & ManModeExit=78 kann man nach dem
  24. // "Kaltstart eine schöne ruhige Zeit haben, bis die Temps 78 °C
  25. // erreichen und das Programm auf smart mode schaltet.
  26.  
  27. // -----------------------------------------------------------------
  28. // -----------------------------------------------------------------
  29. // "Active=0" program just reads config.
  30. // "Active=1" allow program to modify fan.
  31. // "Active=2" program will come up in smart mode.
  32. // "Active=3" program will come up in manual mode.
  33. // bei "Active=0" wird nur die Konfiguration ausgelesen.
  34. // bei "Active=1" die Veränderung des Lüfterverhaltens ist aktiviert.
  35. // bei "Active=2" startet das Programm im "Smart"-Modus.
  36. // bei "Active=3" startet das Programm im "Manual"-Modus.
  37.  
  38. Active=2
  39.  
  40. // -----------------------------------------------------------------
  41. // manual fan speed at program start
  42. // Lüfterstufe beim Programmstart
  43.  
  44. ManFanSpeed=7
  45.  
  46. // -----------------------------------------------------------------
  47. // Program exits manual mode and switches to smart mode with last chosen
  48. // profile, if this temp (degrees Centigrade or Fahrenheit) is achieved.
  49. // default= 80 degrees Centigrade / 176 degrees Fahrenheit.
  50. // Das Program verlässt den manual mode und schaltet auf smart mode mit
  51. // letztem gewähltem Profil, wenn diese Temperatur erreicht ist.
  52. // default= 80 Grad Celsius / 176 Grad Fahrenheit.
  53.  
  54. ManModeExit=78 //ManModeExit=172 // with Fahrenheit
  55.  
  56. // -----------------------------------------------------------------
  57. // Window stays on Top if StayOnTop=1, normal behavior =0
  58. // Programmfenster bleibt im Vordergrund bei StayOnTop=1, ansonsten =0
  59.  
  60. StayOnTop=1
  61.  
  62. // -----------------------------------------------------------------
  63. // Set to 1 for slim widget
  64. // Schmales Programmfenster bei SlimDialog=1, ansonsten =0
  65.  
  66. SlimDialog=1
  67.  
  68. // -----------------------------------------------------------------
  69. // set to 1 for bluetooth with enhanced data rate (i.e. T61,
  70. // X61 for T4x, R5x set BluetoothEDR=0 )
  71. // BluetoothEDR=1 für bluetooth mit enhanced data rate (EDR, z.B. T61,
  72. // X61 für T4x, R5x BluetoothEDR=0 setzen)
  73.  
  74. BluetoothEDR=1
  75.  
  76. // -----------------------------------------------------------------
  77. // Windows Priority of Process (0-5, normal=2), increase if fancontrol has
  78. // big delays in response while other processes consume performance.
  79. // Windows-Priorität des Processes (0-5, normal=2), ggf. erhöhen, falls
  80. // Reaktion des Programms zu träge wegen Resourcenverbrauch durch andere
  81. // Anwendungen
  82.  
  83. ProcessPriority=2
  84.  
  85. // -----------------------------------------------------------------
  86. // Show no icon ballons: NoBallons=1, show icon ballons: NoBallons=0
  87. // Icon Sprechblasen anzeigen mit NoBallons=0, keine bei NoBallons=1
  88.  
  89. NoBallons=1
  90.  
  91. // -----------------------------------------------------------------
  92. // check temperatures every x seconds (default 5)
  93. // Überprüft die Temperaturen alle x Sekunden (Standard ist 5).
  94.  
  95. Cycle=5
  96.  
  97. // -----------------------------------------------------------------
  98. // For Thinkpads A2x,T2x,X2x set NoExtSensor=1 to exclude reading
  99. // of extended sensors to prevent program errors. Attention 570(E)
  100. // is NOT compatible. Fan speed is not available on all models.
  101. // Bei Thinkpads A2x,T2x,X2x NoExtSensor=1 setzen: die Sensoren 9-12
  102. // werden nicht ausgelesen und dadurch Fehlermeldungen vermieden.
  103. // Funktioniert NICHT bei 570(E), Fanspeed nicht immer verfügbar.
  104.  
  105. NoExtSensor=0
  106.  
  107. // -----------------------------------------------------------------
  108. // Minimize to systray immediately when starting
  109. // Minimiert das Programm schon beim Start in die Taskleiste.
  110.  
  111. StartMinimized=1
  112.  
  113. // -----------------------------------------------------------------
  114. // check icon of tpfcicon.exe (optional) every x seconds (default 1)
  115. // Überprüft das Icon von tpfcicon.exe alle x Sekunden (Standard =1).
  116.  
  117. IconCycle=1
  118.  
  119. // -----------------------------------------------------------------
  120. // Show new icon with max. temperature / sensor name
  121. // Zeige neues Icon mit Max. Temperatur / Sensorbezeichnung
  122.  
  123. ShowTempIcon=1
  124.  
  125. // -----------------------------------------------------------------
  126. // Save the icon by a start delay of the program/service of
  127. // "SecStartDelay" (sec.) within "SecWinUptime" (sec.) after (re)boot
  128. // Delete slashes '//' at next 3 parameters.
  129. // Das Problem der nicht erscheinenden Icons wird durch eine
  130. // Startverzögerung um SecStartDelay (Sekunden) innerhalb einer Zeit von
  131. // SecWinUptime (Sekunden) verhindert. Kommentarstriche "//" entfernen.
  132. //
  133. //SecWinUptime=120 //"SecWinUptime" (sec.) after (re)boot
  134. //SecStartDelay=60 //start delay of the program (sec.)
  135. //NoWaitMessage=0 //set to 1 to avoid sleep message
  136. //ReIcCycle=600 //rebuild TempIcon every xxx secs.
  137.  
  138. // -----------------------------------------------------------------
  139. // Temperature thresholds for turning the taskbar icon
  140. // yellow orange red (Smart and Manual mode only and
  141. // only together with MinimizeToTray=1)
  142. // Temperaturgrenzwerte, die das Symbol in der Taskbar gelb,
  143. // orange bzw. rot färben. (Nur im "Smart"- und "Manual"-Modus
  144. // in Kombination mit "MinimizeToTray=1" verfügbar.)
  145.  
  146. IconLevels=65 75 80 // Fahrenheit: IconLevels=122 140 158
  147.  
  148. // -----------------------------------------------------------------
  149. // Beep frequency and duration (in ms) for successful
  150. // fan state changes. (Set either or both to zero to
  151. // disable)
  152. // Frequenz und Dauer des Piep-Signals (in ms), das eine erfolgreiche
  153. // Änderung des Lüfterzustands ankündigt. (Um den Piepton abzuschalten,
  154. // setzen Sie entweder einen oder beide Werte auf 0.)
  155.  
  156. FanBeep=5000 200
  157.  
  158. // --------------------------------------------------------
  159. // If this max number of consecutive EC read errors occur
  160. // program will switch fan back to bios mode and exit
  161. // Sobald die maximale Anzahl aufeinanderfolgender EC-Lesefehler
  162. // erreicht ist, schaltet das Programm auf den BIOS-Modus um
  163. // und wird beendet.
  164.  
  165. MaxReadErrors= 10
  166.  
  167. // --------------------------------------------------------
  168. // Log2File=1 enables, Log2File=0 disables writing to TPFanControl.log
  169. // Start program with admin rights.
  170. // Log2File=1 aktiviert, Log2File=0 deaktiviert
  171. // Schreiben nach TPFanControl.log, Programm benötigt Admin-Rechte.
  172.  
  173. Log2File=0
  174.  
  175. // --------------------------------------------------------
  176. // Log2csv=1 enables, Log2csv=0 disables
  177. // writing to TPFanControl_csv.txt renamed to
  178. // TPFanControl_last_csv.txt after restart of TPFanControl
  179. // rename to *.csv for use with excel
  180. // Start program with admin rights.
  181. // Log2csv=1 aktiviert Schreiben nach TPFanControl_csv.txt
  182. // Programm benötigt Admin-Rechte. Datei wird umbenannt in
  183. // TPFanControl_last_csv.txt nach erneutem Start von TPFanControl
  184. // In *.csv umbenennen für anschliessende Bearbeitung mit excel
  185.  
  186. Log2csv=0
  187.  
  188. // --------------------------------------------------------
  189. // List (separated by comma) of sensors to ignore when
  190. // determining the max. temperature. (Use lower case,
  191. // e.g "IgnoreSensors=pci,aps")
  192. // Liste der Sensoren, getrennt durch Kommata, die bei der
  193. // Ermittlung der Maximaltemperatur ignoriert werden. (Verwenden
  194. // Sie kleine Buchstaben, z.B. "IgnoreSensors=pci,aps".)
  195.  
  196. IgnoreSensors=no5
  197.  
  198. // ---------------------------------------------------------
  199. // List of new 3 letter sensor names, delete leading
  200. // slashes to aktivat. Don't use capital letters for readability
  201. // of temp icon.
  202. // Liste von neuen Sensorname (jeweils 3 Buchstaben), zum
  203. // Aktivieren die Schrägstriche löschen. Kleine Buschstaben
  204. // wg. der Lesbarkeit im TempIcon gebrauchen.
  205.  
  206. //SensorName1=cpu
  207. //SensorName2=aps
  208. //SensorName3=pcm
  209. //SensorName4=gpu
  210. SensorName5=no5
  211. //SensorName6=x7d
  212. //SensorName7=bat
  213. //SensorName8=x7f
  214. //SensorName9=bus
  215. //SensorName10=pci
  216. //SensorName11=pwr
  217. //SensorName12=xc3
  218.  
  219. // ---------------------------------------------------------
  220. // calculating Highest Temp with:
  221. // temperature of sensor no. = real temp minus SensorOffsetno.
  222. // Default SensorOffset1-12=0 , Capital O in SensorOffset,
  223. // to activate delete slashes '//',
  224. // Negative SensorOffsetno. values increase temperature values.
  225. // Berechnung von Highest Temp mit:
  226. // Temperatur des Sensor Nr. = reale Temp minus SensorOffsetnr.
  227. // Default: SensorOffset1-12=0 , Grosses O in SensorOffsetnr.
  228. // zum Aktivieren Schrägstriche '//' löschen,
  229. // Negative SensorOffsetnr-Werte erhöhen den Temperaturwert.
  230.  
  231. //SensorOffset1=20
  232. //SensorOffset2=20
  233. //SensorOffset3=0
  234. //SensorOffset4=2
  235. //SensorOffset5=1
  236. //SensorOffset6=5
  237. //SensorOffset7=5
  238. //SensorOffset8=4
  239. //SensorOffset9=3
  240. //SensorOffset10=2
  241. //SensorOffset11=1
  242. //SensorOffset12=5
  243.  
  244. // -----------------------------------------------------------------
  245. // set to 1 to show calculated temps for sensors
  246. // =1 gesetzt zeigt die Temperaturen mit Offsetkorrektur an
  247.  
  248. ShowBiasedTemps=1
  249.  
  250. // -----------------------------------------------------------------
  251. // Show all/active sensors at start up. all=1 only active=0
  252. // Zeige alle/aktive Sensoren an: alle=1, nur aktive =0
  253.  
  254. ShowAll=0
  255.  
  256. // --------------------------------------------------------
  257. // temperature levels 'Level=' with associated fan levels
  258. // (for the fan to come back, temperature must fall
  259. // down to previous level). There may be more or
  260. // less levels in this list. The first one should
  261. // have a fan speed of zero and is the "turn off"
  262. // temperature.
  263. // Fan speed of 64 is extreme and may be an *unsupported*
  264. // and *damaging* mode. A fan speed of 128 setting is
  265. // not really a fan speed in itself but will instead switch
  266. // fan control to BIOS mode (0x80). The idea of this
  267. // is to let the program get out of the way and let the
  268. // BIOS handle extremes.(and then switch back to smart if
  269. // the temperature is okay again)
  270. //
  271. // Im Folgenden sind die Temperaturpegel samt den jeweils
  272. // zugeordeten Lüfterstufen aufgelistet. (Sobald die Temperatur in
  273. // den Bereich eines niedrigeren bzw. höheren Pegels wechselt, wird
  274. // die Lüfterstufe automatisch angepasst und folglich verringert bzw.
  275. // erhöht sich die Geschwindigkeit des Lüfters.) Diese Liste kann
  276. // weniger oder auch mehr Stufen beinhalten. Sinngemäß sollte die
  277. // erste Stufe die gewünschte Temperatur definieren, bei der sich
  278. // der Lüfter ausschaltet (Lüftergeschwindigkeit 0)
  279. // Die Lüftergeschwindigkeit 64 ist ein Extremwert und könnte somit
  280. // eine von IBM nicht unterstützte und sogar schädigende Betriebsart
  281. // darstellen. Die Lüftergeschwindigkeit 128 ist an sich keine eigene
  282. // Geschwindigkeitsstufe, sondern gibt stattdessen die Kontrolle
  283. // des Lüfters an das BIOS (BIOS mode, 0x80) zurück. Der Hintergrund
  284. // dieser Einstellung ist die Möglichkeit, das Programm auszuschließen,
  285. // um Extemfälle wieder vom BIOS steuern zu lassen. (Sobald sich die
  286. // Temperatur wieder im Normbereich befindet, wird erneut der Smart
  287. // Modus aktiviert.)
  288. //
  289. // Temp of lowest Level (commonly set to fan speed zero) of profile
  290. // "Smart Mode 1" will switch from Celsius to Fahrenheit if set higher
  291. // than 79 degrees. Temps of higher levels have no influence on F/C.
  292. //
  293. // profile "Smart Mode 1"
  294. // change values and number of items for your needs
  295. // Celsius: // Fahrenheit:
  296.  
  297. MenuLabelSM1=Smart Mode 1/ Label for Icon Menu, must be terminated by '/'
  298.  
  299. Level=40 2
  300. //Level=65 1
  301. Level=75 3
  302. Level=80 7
  303. Level=90 64
  304.  
  305. // optional 2nd profile "Smart Mode 2", switched by icon menue
  306. // change values and number of items for your needs
  307. // to deactivate, insert leading '//' into following lines
  308.  
  309. MenuLabelSM2=Smart Mode 2/ Label for Icon Menu, must be terminated by '/'
  310.  
  311. Level2=22 0 // Level2=70 0
  312. Level2=33 1 // Level2=90 1
  313. Level2=38 2 // Level2=100 2
  314. Level2=44 3 // Level2=110 3
  315. Level2=55 7 // Level2=130 7
  316. Level2=66 64 // Level2=150 64
  317. Level2=77 128 // Level2=170 128
  318.  
  319. // -----------------------------------------------------------------
  320. // IconColorFan=1 digital Icon will turn green while fan is running.
  321. // IconColorFan=1 Digitales Icon wird grün während der Lüfter läuft.
  322.  
  323. IconColorFan=1
  324.  
  325. // -----------------------------------------------------------------
  326. // Lev64Norm=1 : Fan level 64 acts as normal level with hysteresis,
  327. // fan will run till next lower temp step is reached (no pulsing fan).
  328. // If set to zero fan level 64 acts as emergency level without hysteresis,
  329. // fan will run till level64 temp is reached again (pulsing fan can happen).
  330. // Lev64Norm=1 : Fan level 64 arbeitet mit Hysterese, Lüfter läuft,
  331. // bis nächst tieferer level erreicht wird. Lüfter pulsiert nicht.
  332. // Falls Lev64Norm=0 gesetzt, arbeitet level 64 als Notfallkühlung oberhalb
  333. // der Temperatur von level 64. Ein Pulsieren des Lüfters ist möglich.
  334.  
  335. Lev64Norm=1
Advertisement
Add Comment
Please, Sign In to add comment