Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 1 ### SECURE FUNCTION TABLE 2a02935c
- [ 0.484999] c0 1
- [ 0.485029] c0 1 TZ Version: 1.430.24.13
- [ 0.485090] c0 1 Security Flag: 0
- [ 0.485151] c0 1 HWID: 207150e1
- [ 0.485182] c0 1 MIDR: 511f06f0
- [ 0.485243] c0 1 TZ XOR: dea1b00e
- [ 0.485304] c0 1 xpu: ISR begin
- [ 0.485334] c0 1 CESR: 00000000 L2ESR: 00010002
- [ 0.485396] c0 1 >[1]GCC,vmid=2,a=00000000,lr=0021c728<
- [ 0.485457] c0 1 DCVS_REQ[1]: DcvsInit(0xff300000,32768)
- [ 0.485518] c0 1
- [ 0.485548] c0 1 DCVS_RSP[1]: Status=0x0
- [ 0.485609] c0 1
- [ 0.485670] c0 1 (5)
- [ 0.488539] c0 1 [TZ] --- LOG END---
- [ 0.489668] c0 1 [SEC] [I] secure_log_operation(1, swapper/0): TZ_HTC_SVC_LOG_OPERATOR ret = 0
- [ 0.505386] c1 65 [MDM][COMM] mdm_common_create: mfg_mode=[0]
- [ 0.511460] c1 65 [MDM] mdm_peripheral_disconnect+
- [ 0.511765] c1 65 [MDM] mdm_peripheral_disconnect-
- [ 0.512131] c1 65 [MDM] Pulling RESET gpio low
- [ 0.522600] c1 65 [MDM] power_on_mdm: Pulling RESET gpio high
- [ 0.586662] c1 65 [MDM] power_on_mdm: waiting for MDM HSIC READY signal.
- [ 0.606622] c1 65 [MDM] power_on_mdm: waiting for MDM HSIC READY signal.
- [ 0.607019] c1 65 [MDM] mdm_peripheral_connect+
- [ 0.608576] c1 65 [MDM] mdm_peripheral_connect-
- [ 0.816694] c1 65 [MDM][COMM] mdm_common_create: Registering mdm modem
- [ 0.818922] c0 1 L2 Error detected!
- [ 0.819197] c0 1 L2ESR = 0x00010003
- [ 0.819471] c0 1 L2ESYNR0 = 0x60006111
- [ 0.819746] c0 1 L2ESYNR1 = 0x0024a042
- [ 0.819990] c0 1 L2EAR0 = 0xa2025c68
- [ 0.820265] c0 1 L2EAR1 = 0x00000007
- [ 0.820509] c0 1 CPU bitmap = 0x1
- [ 0.820753] c0 1 L2 master port decode error
- [ 0.821028] c0 1 L2 master port slave error
- [ 0.821303] c0 1 ------------[ cut here ]------------
- [ 0.821669] c0 1 WARNING: at /home/bryan-ubuntu/testing/kernel/htc/m7/arch/arm/mach-msm/cache_erp.c:416 msm_l2_erp_irq+0x1e0/0x280()
- [ 0.822218] c0 1 L2 master port error detected
- [ 0.822462] c0 1 Modules linked in:
- [ 0.822951] c0 1 [<c0014e1c>] (unwind_backtrace+0x0/0xec) from [<c07d0a48>] (dump_stack+0x20/0x24)
- [ 0.823531] c0 1 [<c07d0a48>] (dump_stack+0x20/0x24) from [<c009a704>] (warn_slowpath_common+0x5c/0x74)
- [ 0.824141] c0 1 [<c009a704>] (warn_slowpath_common+0x5c/0x74) from [<c009a7d8>] (warn_slowpath_fmt+0x40/0x48)
- [ 0.824752] c0 1 [<c009a7d8>] (warn_slowpath_fmt+0x40/0x48) from [<c0095acc>] (msm_l2_erp_irq+0x1e0/0x280)
- [ 0.825362] c0 1 [<c0095acc>] (msm_l2_erp_irq+0x1e0/0x280) from [<c00fe920>] (handle_irq_event_percpu+0x98/0x288)
- [ 0.826003] c0 1 [<c00fe920>] (handle_irq_event_percpu+0x98/0x288) from [<c00feb5c>] (handle_irq_event+0x4c/0x6c)
- [ 0.826613] c0 1 [<c00feb5c>] (handle_irq_event+0x4c/0x6c) from [<c0101bd4>] (handle_fasteoi_irq+0xe8/0x134)
- [ 0.827224] c0 1 [<c0101bd4>] (handle_fasteoi_irq+0xe8/0x134) from [<c00fe22c>] (generic_handle_irq+0x30/0x40)
- [ 0.827865] c0 1 [<c00fe22c>] (generic_handle_irq+0x30/0x40) from [<c000f1ec>] (handle_IRQ+0x8c/0xd0)
- [ 0.828414] c0 1 [<c000f1ec>] (handle_IRQ+0x8c/0xd0) from [<c000873c>] (gic_handle_irq+0x11c/0x18c)
- [ 0.828994] c0 1 [<c000873c>] (gic_handle_irq+0x11c/0x18c) from [<c000e2c0>] (__irq_svc+0x40/0x70)
- [ 0.829452] c0 1 Exception stack(0xe5243d80 to 0xe5243dc8)
- [ 0.829848] c0 1 3d80: c0d09350 00000000 00060006 00010000 60000013 e4b61d40 00000022 00000000
- [ 0.830398] c0 1 3da0: c0d09350 c0d09330 00000000 e5243ddc c07ddf74 e5243dc8 c0100110 c07ddfe8
- [ 0.830886] c0 1 3dc0: 60000013 ffffffff
- [ 0.831252] c0 1 [<c000e2c0>] (__irq_svc+0x40/0x70) from [<c07ddfe8>] (_raw_spin_unlock_irqrestore+0x88/0xc0)
- [ 0.831863] c0 1 [<c07ddfe8>] (_raw_spin_unlock_irqrestore+0x88/0xc0) from [<c0100110>] (__setup_irq+0x2b8/0x39c)
- [ 0.832443] c0 1 [<c0100110>] (__setup_irq+0x2b8/0x39c) from [<c01002dc>] (request_threaded_irq+0xe8/0x140)
- [ 0.833023] c0 1 [<c01002dc>] (request_threaded_irq+0xe8/0x140) from [<c0095654>] (msm_cache_erp_probe+0xb4/0x1d0)
- [ 0.833633] c0 1 [<c0095654>] (msm_cache_erp_probe+0xb4/0x1d0) from [<c03a4894>] (platform_drv_probe+0x24/0x28)
- [ 0.834243] c0 1 [<c03a4894>] (platform_drv_probe+0x24/0x28) from [<c03a3424>] (driver_probe_device+0xc8/0x20c)
- [ 0.834884] c0 1 [<c03a3424>] (driver_probe_device+0xc8/0x20c) from [<c03a35e0>] (__driver_attach+0x78/0x9c)
- [ 0.835495] c0 1 [<c03a35e0>] (__driver_attach+0x78/0x9c) from [<c03a18a8>] (bus_for_each_dev+0x5c/0x98)
- [ 0.836105] c0 1 [<c03a18a8>] (bus_for_each_dev+0x5c/0x98) from [<c03a2f10>] (driver_attach+0x28/0x30)
- [ 0.836716] c0 1 [<c03a2f10>] (driver_attach+0x28/0x30) from [<c03a2a78>] (bus_add_driver+0xf0/0x258)
- [ 0.837295] c0 1 [<c03a2a78>] (bus_add_driver+0xf0/0x258) from [<c03a3b44>] (driver_register+0xac/0x130)
- [ 0.837845] c0 1 [<c03a3b44>] (driver_register+0xac/0x130) from [<c03a4be0>] (platform_driver_register+0x54/0x68)
- [ 0.838455] c0 1 [<c03a4be0>] (platform_driver_register+0x54/0x68) from [<c0c13e64>] (msm_cache_erp_init+0x14/0x1c)
- [ 0.839066] c0 1 [<c0c13e64>] (msm_cache_erp_init+0x14/0x1c) from [<c0008880>] (do_one_initcall+0xa4/0x174)
- [ 0.839676] c0 1 [<c0008880>] (do_one_initcall+0xa4/0x174) from [<c0c00b88>] (kernel_init+0x104/0x1c4)
- [ 0.840286] c0 1 [<c0c00b88>] (kernel_init+0x104/0x1c4) from [<c000f458>] (kernel_thread_exit+0x0/0x8)
- [ 0.840775] c0 1 ---[ end trace da227214a82491b8 ]---
- [ 0.843491] c0 1 usbcore: registered new interface driver hsic_sysmon
- [ 0.871356] c0 1 audit: initializing netlink socket (disabled)
- [ 0.871905] c0 1 type=2000 audit(0.850:1): initialized
- [ 0.881611] c0 1 highmem bounce pool size: 64 pages
- [ 0.945093] c0 1 NTFS driver 2.1.30 [Flags: R/O].
- [ 0.948481] c0 1 fuse init (API version 7.18)
- [ 0.951381] c0 1 msgmni has been set to 871
- [ 0.966336] c0 1 io scheduler noop registered
- [ 0.966854] c0 1 io scheduler deadline registered
- [ 0.967343] c0 1 io scheduler row registered (default)
- [ 0.968960] c0 1 io scheduler cfq registered
- [ 0.969418] c0 1 io scheduler fiops registered
- [ 0.970059] c0 1 [CPUQUIET]: cpq_auto_hotplug_init: initialized
- [ 0.971555] c0 1 [CPUQUIET]: cpuquiet_register_governor runnable
- [ 0.971951] c0 1 [CPUQUIET]: cpuquiet_register_governor rq_stats
- [ 0.972287] c0 1 [CPUQUIET]: cpuquiet_register_governor load_stats
- [ 0.973844] c0 1 [CPUQUIET]: cpuquiet_switch_governor load_stats
- [ 1.016908] c0 1 mipi_dsi base phy_addr = 0x4700000 virt = 0xe8300000
- [ 1.017427] c0 1 mmss_sfpb base phy_addr = 0x5700000,virt = 0xe60cc000
- [ 1.019136] c0 1 Inside writeback_driver_init
- [ 1.030154] c0 1
- [ 1.030215] c0 1 msm_vidc_enc: Inside vid_enc_init()
- [ 1.033145] c0 1
- [ 1.033175] c0 1 msm_vidc_enc: Inside vid_enc_vcd_init()
- [ 1.034426] c1 65 8921_s4: Failed to create debugfs directory
- [ 1.035006] c1 65 8921_l11: Failed to create debugfs directory
- [ 1.035525] c1 65 8921_l12: Failed to create debugfs directory
- [ 1.037936] c1 65 mhl_sii9234_all_power(on): success
- [ 1.038974] c0 1 msm_serial: driver initialized
- [ 1.039249] c1 65 [DISP] MhlTx: SiiMhlTxInitialize
- [ 1.042179] c0 1 msm_serial_hs module loaded
- [ 1.042331] c1 65 [DISP] Drv: SiiMhlTxChipInitialize: 9244
- [ 1.043979] c0 1 [BT]BRCM chip
- [ 1.044559] c1 65 [DISP] SiI 9234
- [ 1.044651] c1 65 [DISP] Drv: WriteInitialRegisterValues
- [ 1.046207] c0 1 msm_serial_hs_brcm.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
- [ 1.050083] c0 1 [BT]msm_serial_hs module loaded
- [ 1.052006] c0 1 msm_serial_hsl: detected port #1
- [ 1.053135] c0 1 msm_serial_hsl.1: ttyHSL1 at MMIO 0x12450000 (irq = 225) is a MSM
- [ 1.055577] c0 1 msm_serial_hsl: detected port #3
- [ 1.056920] c0 1 msm_serial_hsl.3: ttyHSL3 at MMIO 0x12490000 (irq = 227) is a MSM
- [ 1.059362] c0 1 msm_serial_hsl: detected port #0
- [ 1.060491] c0 1 msm_serial_hsl.0: ttyHSL0 at MMIO 0x16640000 (irq = 190) is a MSM
- [ 1.063451] c0 1 msm_serial_hsl: driver initialized
- [ 1.065222] c0 1 msm_serial_cir: detected port #2
- [ 1.065557] c0 1 [CIR] cir_power on = 1, reg_cir_3v = 0x0
- [ 1.067663] c0 1 [CIR] cir_power(on): success
- [ 1.068182] c0 1 msm_serial_cir: get gsbi_uart_clk and gsbi_pclk
- [ 1.068609] c0 1 msm_serial_hsl: port[2] mapbase:16240000
- [ 1.069433] c0 1 [CIR] msm_serial_hsl_probe_cir () device_create_file, port->line 2, ir
- [ 1.070288] c0 1 [CIR] msm_serial_hsl_probe_cir () clk_enable, port->line 2, ir
- [ 1.070898] c0 1 [CIR] msm_hsl_config_port_cir () :port->line 2, ir
- [ 1.071570] c0 1 [CIR] msm_hsl_request_port_cir: memory map for base 0x16240000
- [ 1.071997] c0 1 [CIR] msm_hsl_request_port_cir ():uart_resource :port->line 2, memory map for base 0x16240000 ir
- [ 1.072699] c0 1 [CIR] msm_serial_hsl_has_gsbi: cir uart port[2] is_uartdm=1
- [ 1.073096] c0 1 [CIR] msm_hsl_request_port_cir: get gsbi_resource for port[2]
- [ 1.073767] c0 1 [CIR] msm_hsl_request_port_cir () ok:port->line 2, ir
- [ 1.074133] c0 1 [CIR] msm_serial_hsl_has_gsbi: cir uart port[2] is_uartdm=1
- [ 1.074744] c0 1 [CIR] msm_hsl_config_port_cir: cir line[2] GSBI_CONTROL_ADDR-60
- [ 1.075171] c0 1 [CIR] msm_hsl_config_port_cir () GSBI_CONTROL_ADDR:port->line 2, ir
- [ 1.075812] c0 1 msm_serial_cir.2: ttyHSL2 at MMIO 0x16240000 (irq = 182) is a MSM
- [ 1.076392] c0 1 [CIR] msm_hsl_power_cir (): ir, state 0
- [ 1.077063] c0 1 [CIR] msm_hsl_power_cir (): ir, state 3
- [ 1.079627] c0 1 [CIR] msm_serial_hsl_probe_cir () clk_disabl, port->line 2, ir
- [ 1.080238] c0 1 [CIR] msm_serial_hsl_probe_cir ():port->line 2, ir
- [ 1.083900] c0 1 [CIR] msm_serial_hsl_init_cir(): driver initialized, msm_serial_hsl_enable 0
- [ 1.096200] c0 1 msm_rotator_probe: rotator_hw_revision=2
- [ 1.097726] c1 65 [DISP] Drv: MHL 1.0 Compliant Clock
- [ 1.101052] c0 1 diagfwd_init: start
- [ 1.122417] c3 1 [USBDIAG] diagchar initialized now
- [ 1.133160] c3 1 kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
- [ 1.139050] c0 65 [DISP] Drv: InitCBusRegs
- [ 1.164718] c0 65 [DISP] Drv: Switch To D3: pinAllowD3 = 1
- [ 1.222035] c3 1 brd: module loaded
- [ 1.239249] c0 65 input: rcp_events as /devices/virtual/input/input1
- [ 1.239707] c0 65 [DISP] sii9234_probe: Probe success!
- [ 1.264977] c3 1 loop: module loaded
- [ 1.267877] c3 1 i2c-core: driver [mpu3050] using legacy suspend method
- [ 1.268274] c3 1 i2c-core: driver [mpu3050] using legacy resume method
- [ 1.268792] c3 1 mpu_init
- [ 1.283442] c3 1 tabla-slim tabla-slim: Initialized slim device tabla-slim
- [ 1.377018] c0 1 fail to get slimbus logical address -6
- [ 1.385930] c0 1 tabla2x-slim tabla2x-slim: Initialized slim device tabla2x-slim
- [ 1.503952] c0 1 wcd9xxx_device_init : Codec version 2 initialized
- [ 1.504349] c0 1 idbyte_0[00000002] idbyte_1[00000000] idbyte_2[00000000] idbyte_3[00000001]
- [ 1.507950] c0 1 i2c-core: driver [tabla-i2c-core] using legacy suspend method
- [ 1.508377] c0 1 i2c-core: driver [tabla-i2c-core] using legacy resume method
- [ 1.510056] c0 1 i2c-core: driver [sitar-i2c-core] using legacy suspend method
- [ 1.510483] c0 1 i2c-core: driver [sitar-i2c-core] using legacy resume method
- [ 1.511033] c0 1 pm8xxx_batt_alarm_init: pm8xxx_batt_alarm_init, 760
- [ 1.511918] c0 1 pm8xxx_batt_alarm_probe: pm8xxx_batt_alarm_probe, 650
- [ 1.512589] c0 1 pm8xxx_batt_alarm_reg_init: pm8xxx_batt_alarm_reg_init, 565
- [ 1.513993] c0 1 pm8xxx_batt_alarm_probe: pm8xxx_batt_alarm_probe, 716
- [ 1.519700] c0 1 SCSI Media Changer driver v0.25
- [ 1.523851] c0 1 spi_qsd spi_qsd.0: master is unqueued, this is deprecated
- [ 1.533374] c0 1 [NET][CORE][RULE] attach_rules
- [ 1.534564] c0 1 tun: Universal TUN/TAP device driver, 1.6
- [ 1.534930] c0 1 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.537372] c0 1 [RMNETBAM] rmnet_init: BAM devices[8]
- [ 1.540912] c0 1 [NET][CORE][RULE] attach_rules
- [ 1.547260] c0 1 [NET][CORE][RULE] attach_rules
- [ 1.553364] c0 1 [NET][CORE][RULE] attach_rules
- [ 1.559682] c0 1 [NET][CORE][RULE] attach_rules
- [ 1.566091] c0 1 [NET][CORE][RULE] attach_rules
- [ 1.572409] c0 1 [NET][CORE][RULE] attach_rules
- [ 1.578696] c0 1 [NET][CORE][RULE] attach_rules
- [ 1.584800] c0 1 [NET][CORE][RULE] attach_rules
- [ 1.593010] c0 1 PPP generic driver version 2.4.2
- [ 1.594872] c0 1 PPP BSD Compression module registered
- [ 1.595208] c0 1 PPP Deflate Compression module registered
- [ 1.615962] c0 1 PPP MPPE Compression module registered
- [ 1.616297] c0 1 NET: Registered protocol family 24
- [ 1.617091] c0 1 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- [ 1.617610] c0 1 CSLIP: code copyright 1989 Regents of the University of California.
- [ 1.618647] c0 1 usbcore: registered new interface driver asix
- [ 1.619502] c0 1 usbcore: registered new interface driver cdc_ether
- [ 1.620357] c0 1 usbcore: registered new interface driver net1080
- [ 1.621181] c0 1 usbcore: registered new interface driver cdc_subset
- [ 1.621974] c0 1 usbcore: registered new interface driver zaurus
- [ 1.623622] c0 1 usbcore: registered new interface driver cdc_ncm
- [ 1.624599] c0 1 usbcore: registered new interface driver rmnet_usb
- [ 1.630428] c0 1 rmnet usb ctrl Initialized.
- [ 1.631344] c0 1 [USB] msm_otg probe
- [ 1.631802] c0 1 [USB] failed to get phy_clk
- [ 1.632443] c0 1 [USB] OTG regs = e60e8000
- [ 1.634488] c0 1 [USB] msm_hsusb_config_vddcx: min_vol:1045000 max_vol:1320000
- [ 1.638242] c3 1 [USB] reg (HPM)
- [ 1.642240] c3 1 [USB] OTG runtime idle
- [ 1.643949] c3 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.645109] c3 1 [USB] host driver registered w/ tranceiver
- [ 1.664825] c3 1 msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
- [ 1.665435] c3 1 msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
- [ 1.687349] c3 1 msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
- [ 1.707157] c3 1 msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
- [ 1.708835] c3 1 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.709293] c3 1 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.709751] c3 1 usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
- [ 1.710148] c3 1 usb usb1: Manufacturer: Linux 3.4.10-CM-gdfde9ba-dirty ehci_hcd
- [ 1.710575] c3 1 usb usb1: SerialNumber: msm_hsic_host
- [ 1.715611] c3 1 hub 1-0:1.0: USB hub found
- [ 1.716130] c3 1 hub 1-0:1.0: 1 port detected
- [ 1.725560] c3 1 usbcore: registered new interface driver cdc_acm
- [ 1.725927] c3 1 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 1.726445] c3 1 Initializing USB Mass Storage driver...
- [ 1.728063] c3 1 usbcore: registered new interface driver usb-storage
- [ 1.728429] c3 1 USB Mass Storage support registered.
- [ 1.729681] c3 1 usbcore: registered new interface driver libusual
- [ 1.730474] c3 1 usbcore: registered new interface driver ums-alauda
- [ 1.731268] c3 1 usbcore: registered new interface driver ums-cypress
- [ 1.732061] c3 1 usbcore: registered new interface driver ums-datafab
- [ 1.732855] c3 1 usbcore: registered new interface driver ums-freecom
- [ 1.733648] c3 1 usbcore: registered new interface driver ums-isd200
- [ 1.734503] c3 1 usbcore: registered new interface driver ums-jumpshot
- [ 1.735296] c3 1 usbcore: registered new interface driver ums-karma
- [ 1.736090] c3 1 usbcore: registered new interface driver ums-onetouch
- [ 1.737066] c3 1 usbcore: registered new interface driver ums-sddr09
- [ 1.737891] c3 1 usbcore: registered new interface driver ums-sddr55
- [ 1.738684] c3 1 usbcore: registered new interface driver ums-usbat
- [ 1.740149] c3 1 usbcore: registered new interface driver usbserial
- [ 1.740485] c3 1 usbserial: USB Serial Driver core
- [ 1.741370] c3 1 usbcore: registered new interface driver qcserial
- [ 1.742041] c3 1 USB Serial support registered for Qualcomm USB modem
- [ 1.743048] c3 1 usbcore: registered new interface driver usb_ehset_test
- [ 1.744056] c3 1 usbcore: registered new interface driver diag_bridge
- [ 1.745307] c3 1 usbcore: registered new interface driver mdm_bridge
- [ 1.748206] c3 1 [USB] peripheral driver registered w/ tranceiver
- [ 1.749580] c3 18 [USB] UNDEFINED work
- [ 1.749946] c3 18 [USB] phy_reset: success
- [ 1.754890] c3 1 msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
- [ 1.756996] c3 1 mbim_init: initialize 1 instances
- [ 1.758614] c3 1 mbim_init: Initialized 1 ports
- [ 1.777659] c3 1 android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 1.778116] c3 1 android_usb gadget: Number of LUNs=1
- [ 1.778452] c3 1 lun0: LUN: removable file: (no medium)
- [ 1.780985] c3 1 android_usb gadget: android_usb ready
- [ 1.788158] c3 1 mousedev: PS/2 mouse device common for all mice
- [ 1.796459] c3 1 usbcore: registered new interface driver xpad
- [ 1.797588] c0 114 [TP] synaptics_ts_probe: enter
- [ 1.798290] c3 1 [sweep2wake]: set device keypad_8960
- [ 1.798657] c3 1 [flick2wake]: set device keypad_8960
- [ 1.799206] c3 1 [KEY] keycode = 116, gpio = 1, type = 2
- [ 1.800488] c0 114 [TP] syn_pdt_scan: memory allocate success. ptr: e49202c0
- [ 1.800763] c3 1 [KEY] keycode = 114, gpio = 77, irq = 365
- [ 1.801129] c0 114 [TP] synaptics: 3 function supported
- [ 1.801495] c3 1 [KEY] keycode = 115, gpio = 11, irq = 299
- [ 1.801922] c3 1 [KEY] GPIO Input Driver: Start gpio inputs for keypad_8960 in interrupt mode
- [ 1.802197] c0 114 Query: 8F, Command: 0000, Control: 56, Data: 0, INTR: 1, Funtion: 34
- [ 1.803021] c0 114 Query: 98, Command: 008D, Control: 5A, Data: 13, INTR: 2, Funtion: 1
- [ 1.804181] c0 114 Query: B5, Command: 008E, Control: 5F, Data: 15, INTR: 4, Funtion: 11
- [ 1.804517] c3 1 input: keypad_8960 as /devices/virtual/input/input2
- [ 1.805798] c1 135 [TP] syn_probe_init: enter
- [ 1.811658] c3 1 [KEY] Ship code, disable key reset.
- [ 1.814375] c0 135 [TP] syn_pdt_scan: memory allocate success. ptr: e491cb00
- [ 1.814802] c0 135 [TP] synaptics: 7 function supported
- [ 1.816358] c0 135 Query: 8F, Command: 0000, Control: 56, Data: 0, INTR: 1, Funtion: 34
- [ 1.817915] c0 135 Query: 98, Command: 008D, Control: 5A, Data: 13, INTR: 2, Funtion: 1
- [ 1.819136] c0 135 Query: B5, Command: 008E, Control: 5F, Data: 15, INTR: 4, Funtion: 11
- [ 1.820753] c0 135 Query: 173, Command: 0172, Control: 10D, Data: 100, INTR: 8, Funtion: 54
- [ 1.822066] c3 1 using rtc device, pm8xxx_rtc, for alarms
- [ 1.822401] c0 135 Query: 227, Command: 0200, Control: 201, Data: 200, INTR: 10, Funtion: 31
- [ 1.823012] c3 1 [KEY] gpio_keys_scan_keys: key 1-74, 0 (26) changed to 0
- [ 1.823256] c0 135 Query: 229, Command: 0200, Control: 209, Data: 200, INTR: 20, Funtion: 1A
- [ 1.823714] c3 1 [KEY] [PWR] start count for power key clear check
- [ 1.824172] c3 1 [KEY] gpio_keys_scan_keys: key 1-72, 1 (77) changed to 0
- [ 1.824538] c0 135 Query: 307, Command: 0306, Control: 300, Data: 300, INTR: 40, Funtion: 55
- [ 1.825026] c3 1 [KEY] gpio_keys_scan_keys: key 1-73, 2 (11) changed to 0
- [ 1.825667] c3 133 [KEY] [PWR] cancel power key check reset work unsuccessfully
- [ 1.825820] c0 135 [TP] syn_get_version: package_id: 3202
- [ 1.826461] c0 135 [TP] syn_get_version: packrat_number: 1471960
- [ 1.826583] c3 1 rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
- [ 1.828567] c0 135 [TP] syn_get_version: panel_version: 3332
- [ 1.829360] c3 1 i2c /dev entries driver
- [ 1.829635] c0 135 [TP] syn_get_version: config version: 33320008
- [ 1.830276] c0 135 [TP] enable_flash_programming: clear gpio_irq before enter bootloader mode, data = 2
- [ 1.835189] c3 1 [NFC] pn544_dev_init: Loading pn544 driver
- [ 1.835830] c3 1 [NFC] pn544_probe:
- [ 1.836166] c3 1 [NFC] pn544_probe: init io_wake_lock
- [ 1.836960] c0 135 [TP] syn_pdt_scan: memory allocate success. ptr: e49202c0
- [ 1.837387] c0 135 [TP] synaptics: 2 function supported
- [ 1.837753] c3 1 [NFC] pn544_probe : requesting IRQ 344
- [ 1.838516] c0 135 Query: A1, Command: 0000, Control: 59, Data: 0, INTR: 1, Funtion: 34
- [ 1.839615] c3 1 [NFC] pn544_probe: disable NFC by default (bootmode = 0)
- [ 1.839768] c0 135 Query: AA, Command: 009F, Control: 5D, Data: 13, INTR: 2, Funtion: 1
- [ 1.839890] c0 135 [TP] tw mask = 88 0 , 88
- [ 1.840622] c3 1 [NFC] pn544_Disable: gpio=181 set_value=1
- [ 1.840988] c3 1 [NFC] pn544_probe: Probe success!
- [ 1.841660] c3 1 i2c-core: driver [pn544] using legacy suspend method
- [ 1.842026] c3 1 i2c-core: driver [pn544] using legacy resume method
- [ 1.842514] c3 1 [AUD] tfa9887: tfa9887_init
- [ 1.842728] c0 135 [TP] tw vendor= 0 0
- [ 1.842820] c0 135 [TP] synaptics_ts_probe: pdata->version = 3332, pdata->packrat_number = 1471960, pdata->sensor_id = 10000
- [ 1.843003] c0 135 [TP] CRC = 3B12CC80
- [ 1.845505] c3 1 i2c-core: driver [tfa9887] using legacy suspend method
- [ 1.845902] c3 1 i2c-core: driver [tfa9887] using legacy resume method
- [ 1.846390] c3 1 [AUD] rt5501: rt5501_init
- [ 1.846574] c0 135 qup_i2c qup_i2c.3: QUP: I2C status flags :0x1300c8, irq:183
- [ 1.847001] c0 135 qup_i2c qup_i2c.3: I2C slave addr:0x20 not connected
- [ 1.849320] c0 1 [AUD] rt5501: i2c_read rt5501_i2c_read: rx[0] = 0x6
- [ 1.849717] c0 1 [AUD] rt5501: i2c_read rt5501_i2c_read: rx[1] = 0x1
- [ 1.850053] c0 1 [AUD] rt5501: rt5501 is connected
- [ 1.854417] c0 1 [HS_MGR] (headset_notifier_register) Register HS_INSERT notifier
- [ 1.855241] c0 1 i2c-core: driver [rt5501] using legacy suspend method
- [ 1.855608] c0 1 i2c-core: driver [rt5501] using legacy resume method
- [ 1.856126] c0 1 [AUD] tfa9887l: tfa9887l_init
- [ 1.858232] c0 135 [TP] Disable flash programming success! F01_data: 81
- [ 1.858599] c0 135 [TP] syn_config_update: the same config version and CRC
- [ 1.866961] c0 1 i2c-core: driver [tfa9887l] using legacy suspend method
- [ 1.867205] c1 135 [TP] syn_pdt_scan: memory allocate success. ptr: e5305e80
- [ 1.867327] c1 135 [TP] synaptics: 7 function supported
- [ 1.868029] c0 1 i2c-core: driver [tfa9887l] using legacy resume method
- [ 1.868762] c0 1 [AUD] tpa6185: tpa6185_init
- [ 1.868884] c1 135 Query: 8F, Command: 0000, Control: 56, Data: 0, INTR: 1, Funtion: 34
- [ 1.869830] c1 135 Query: 98, Command: 008D, Control: 5A, Data: 13, INTR: 2, Funtion: 1
- [ 1.870959] c1 135 Query: B5, Command: 008E, Control: 5F, Data: 15, INTR: 4, Funtion: 11
- [ 1.871295] c0 1 qup_i2c qup_i2c.0: QUP: I2C status flags :0x11100c8, irq:226
- [ 1.872852] c1 135 Query: 173, Command: 0172, Control: 10D, Data: 100, INTR: 8, Funtion: 54
- [ 1.874439] c1 135 Query: 227, Command: 0200, Control: 201, Data: 200, INTR: 10, Funtion: 31
- [ 1.875598] c1 135 Query: 229, Command: 0200, Control: 209, Data: 200, INTR: 20, Funtion: 1A
- [ 1.877399] c1 135 Query: 307, Command: 0306, Control: 300, Data: 300, INTR: 40, Funtion: 55
- [ 1.878834] c1 135 [TP] syn_get_information: finger_support: 10
- [ 1.879780] c1 135 [TP] syn_get_information: max_x: 1620, max_y: 2880
- [ 1.880878] c0 1 [AUD] tpa6185: tpa6185_i2c_read: transfer error -5
- [ 1.881397] c0 1 [AUD] tpa6185: tpa6185 is not connected
- [ 1.881947] c0 1 [AUD] tpa6185: tpa6185_probe: gpio 161 off error -5
- [ 1.883564] c1 135 [TP] syn_get_information: X: 16, Y: 26
- [ 1.883869] c0 1 i2c-core: driver [tpa6185] using legacy suspend method
- [ 1.884388] c0 1 i2c-core: driver [tpa6185] using legacy resume method
- [ 1.885029] c1 135 [TP] syn_get_information: ts->relaxation: 10
- [ 1.885396] c1 135 [TP] Load display resolution: 1080x1920
- [ 1.885487] c0 1 [PS][cm3629] cm3629_probe
- [ 1.885975] c1 135 [TP] Debug log level=0x08
- [ 1.888325] c0 135 [TP] input_set_abs_params: mix_x 0, max_x 1620, min_y 0, max_y 2880
- [ 1.890614] c0 135 input: synaptics-rmi-touchscreen as /devices/virtual/input/input3
- [ 1.894246] c0 135 [TP] syn_probe_init: interrupt enable: 7f
- [ 1.896230] c0 135 [TP]synaptics_touch_sysfs_init: Exported GPIO 34.
- [ 1.896596] c0 135 Major number of rmi_char_dev: 232
- [ 1.899160] c0 135 [TP] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode
- [ 1.917869] c0 1 [PS][cm3629] cm3629_read_chip_id, chip_id value = 0x83, 0x0, ret 0
- [ 1.918327] c0 1 [PS][cm3629]cm3629_probe: lp_info->ls_cmd = 0x80!
- [ 1.918693] c0 1 [PS][cm3629] cm3629_probe: ls_cmd 0x80, ps1_adc_offset=0x00, ps2_adc_offset=0x00, ps_debounce=0x0, ps1_thh_diff 0
- [ 1.920830] c0 1 input: lightsensor-level as /devices/virtual/input/input4
- [ 1.925255] c0 1 input: proximity as /devices/virtual/input/input5
- [ 1.928307] c0 1 [LS][cm3629] lightsensor_set_kvalue: ALS calibrated als_kadc=0x6da505e6
- [ 1.928795] c0 1 [LS][cm3629] lightsensor_set_kvalue: als_kadc=0x5e6, als_gadc=0xa7d
- [ 1.929223] c0 1 [LS][cm3629] wsensor_set_kvalue: WS calibrated ws_kadc=0x6da504cb
- [ 1.929650] c0 1 [LS][cm3629] wsensor_set_kvalue: ws_kadc=0x1, ws_gadc=0x1
- [ 1.930077] c0 1 [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[0], 4
- [ 1.930505] c0 1 [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[1], b
- [ 1.930962] c0 1 [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[2], 10
- [ 1.931420] c0 1 [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[3], 70
- [ 1.931878] c0 1 [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[4], e0
- [ 1.932336] c0 1 [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[5], 57d
- [ 1.932763] c0 1 [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[6], 81a
- [ 1.933221] c0 1 [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[7], e79
- [ 1.933679] c0 1 [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[8], 14d9
- [ 1.934137] c0 1 [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[9], ffff
- [ 1.935327] c0 1 [PS][cm3629] psensor_set_kvalue: PS calibrated ps_kparam1 = 0x50530306, ps_kparam2 = 0xFFFF062D
- [ 1.935876] c0 1 [PS][cm3629] psensor_set_kvalue: PS calibrated inte_ps1_canc = 0x2D, inte_ps2_canc = 0x06, ((ps_kparam2 >> 16) & 0xFF) = 0xFF
- [ 1.937830] c0 1 [LS][cm3629] ls_initial_cmd, cmd[0] = 0x81, cmd[1] = 0x0
- [ 1.940485] c0 1 [PS][cm3629] psensor_initial_cmd, finish
- [ 1.944269] c0 1 [PS][cm3629] capella_pl_sensor_lpm_power: pl_sensor_lock lock
- [ 1.944880] c0 1 8921_l16: Failed to create debugfs directory
- [ 1.946284] c0 1 [PS][cm3629] capella_pl_sensor_lpm_power: leave lmp,OK
- [ 1.947535] c0 1 [PS][cm3629] capella_pl_sensor_lpm_power: pl_sensor_lock unlock 4
- [ 1.947993] c0 1 [PS][cm3629] cm3629_probe: Probe success!
- [ 1.948756] c0 1 AKM8963 compass driver: initialize.
- [ 1.949397] c0 1 [COMP][AKM8963] AKM8963 compass driver: probe.
- [ 1.952021] c0 1 input: compass as /devices/virtual/input/input6
- [ 1.958492] c0 1 i2c-core: driver [akm8963] using legacy suspend method
- [ 1.958858] c0 1 i2c-core: driver [akm8963] using legacy resume method
- [ 1.959743] c0 1 [GYRO][R3GD20] r3gd20_gyr: probe start v03.
- [ 1.962307] c0 1 [GYRO][R3GD20] dev_data->pdata->gpio_int2 = 0
- [ 1.965725] c0 1 input: r3gd20_gyr as /devices/i2c-2/2-0068/input/input7
- [ 1.968808] c0 1 [GYRO][R3GD20] r3gd20_device_power_off:
- [ 1.969723] c0 1 [GYRO][R3GD20] r3gd20_probe: Calibration data (x, y, z) = (18, -2, 5)
- [ 1.970639] c0 1 [GYRO][R3GD20] r3gd20_probe: r3gd20_gyr probed: device created successfully
- [ 1.971432] c0 1 i2c-core: driver [r3gd20_gyr] using legacy suspend method
- [ 1.972104] c0 1 i2c-core: driver [r3gd20_gyr] using legacy resume method
- [ 1.973264] c1 140 [TP] Device Status = 0
- [ 1.973966] c0 1 [GSNR][BMA250_BOSCH] Bosch Sensortec Device detected! CHIP ID = 0xf9. BMA250 registered I2C driver!
- [ 1.976316] c0 1 [GSNR][BMA250_BOSCH] BMA250 G-sensor I2C driver: gs_kvalue = 0x670001FB
- [ 1.977109] c0 1 [GSNR][BMA250_BOSCH] bma250_probe: layout = 1
- [ 1.979612] c0 1 input: bma250 as /devices/virtual/input/input8
- [ 1.982755] c0 1 input: CIRSensor as /devices/virtual/input/input9
- [ 1.987639] c0 1 [GSNR][BMA250_BOSCH] bma250_probe: BMA250 BOSCH driver probe successful
- [ 1.988402] c0 1 i2c-core: driver [bma250] using legacy suspend method
- [ 1.988829] c0 1 i2c-core: driver [bma250] using legacy resume method
- [ 1.989317] c0 1 Linux video capture interface: v2.00
- [ 1.991301] c0 1 [CAM] system rev = 128
- [ 1.997253] c0 1 [CAM] htccallback:kobject creat and add
- [ 1.998473] c0 1 [CAM] camera_attrs:kobject creat and add
- [ 2.001037] c0 1 [CAM] YushanII_driver_probe
- [ 2.001342] c0 1 [CAM] setup_YushanII_cdev
- [ 2.003387] c0 1 [CAM]rawchip_spi_init
- [ 2.003967] c0 1 [CAM]:spi_rawchip_probe
- [ 2.008148] c0 1 [CAM] imx135 msm_sensor_init_module
- [ 2.009034] c0 1 [CAM] ov4688 msm_sensor_init_module
- [ 2.009949] c0 1 [CAM] ov4688 msm_sensor_init_module with i2c address 0x6c fail, try 0x20
- [ 2.010956] c0 1 [CAM] vd6869 msm_sensor_init_module
- [ 2.011658] c0 1 [CAM] vd6869_i2c_probe
- [ 2.011963] c0 1 [CAM] msm_sensor_i2c_probe: sensor_i2c_probe called - name: vd6869
- [ 2.012391] c0 1 [CAM] msm_camio_probe_on_bootup: sinfo sensor name - vd6869
- [ 2.012818] c0 1 [CAM] msm_camio_probe_on_bootup: camio_clk m(24000000) v(228570000)
- [ 2.013367] c0 1 [CAM] msm_camio_config_gpio_table: no cam gpio config table
- [ 2.013764] c0 1 [CAM] YushanII_probe_init
- [ 2.014039] c0 1 [CAM] m7_rawchip_vreg_on
- [ 2.014314] c0 1 [CAM] m7_rawchip_vreg_on: 8921_lvs1 1800000
- [ 2.014802] c0 1 8921_lvs1: Failed to create debugfs directory
- [ 2.015901] c0 1 [CAM] m7_rawchip_vreg_on: 8921_lvs1 1800000 (0)
- [ 2.021272] c0 1 [CAM] m7_rawchip_vreg_on: 8921_s2 1200000
- [ 2.021791] c0 1 8921_s2: Failed to create debugfs directory
- [ 2.023378] c0 1 [CAM] m7_rawchip_vreg_on: 8921_s2 1200000 (0)
- [ 2.029909] c0 1 [CAM] rawchip external 1v2 gpio_request,177 rc(0)
- [ 2.030428] c0 1 [CAM] msm_camio_clk_enable: clk(c0d4dcb8) obj.name:4-0010
- [ 2.042575] c0 1 [CAM] YushanII_match_id, YushanII id: 0x4100110c requested id: 0x4100110c
- [ 2.043064] c0 1 [CAM] YushanII_probe_init: probe_success
- [ 2.043399] c0 1 [CAM] msm_sensor_i2c_probe rawhchip probe init success
- [ 2.043766] c0 1 [CAM] msm_sensor_i2c_probe: update htc_image to 1
- [ 2.044071] c0 1 [CAM] m7_yushanii_probed htc_image 1
- [ 2.044407] c0 1 [CAM] update_yushanII_flag() , htc_image=1
- [ 2.044773] c0 1 [CAM] vd6869_power_up called
- [ 2.045048] c0 1 [CAM] vd6869_power_down,sdata->htc_image=1
- [ 2.045353] c0 1 [CAM] m7_vd6869_vreg_on
- [ 2.045658] c0 1 [CAM] check_yushanII_flag() , With yushanII
- [ 2.051182] c3 1 [CAM] m7_vd6869_vreg_on: 8921_lvs4 1800000
- [ 2.051701] c3 1 8921_lvs4: Failed to create debugfs directory
- [ 2.052830] c0 1 [CAM] m7_vd6869_vreg_on: 8921_lvs4 1800000 (0)
- [ 2.058202] c0 1 [CAM] m7_vd6869_vreg_on: 8921_l8 2900000
- [ 2.058721] c0 1 8921_l8: Failed to create debugfs directory
- [ 2.060094] c0 1 [CAM] m7_vd6869_vreg_on: 8921_l8 2900000 (0)
- [ 2.065435] c0 1 [CAM] m7_vd6869_vreg_on: 8921_l9 3100000
- [ 2.066046] c0 1 8921_l9: Failed to create debugfs directory
- [ 2.067419] c0 1 [CAM] m7_vd6869_vreg_on: 8921_l9 3100000 (0)
- [ 2.068762] c0 1 [CAM] [CAM]m7_vd6869_vreg_on: CAM_PIN_GPIO_MCAM_D1V2_EN
- [ 2.069128] c0 1 [CAM] [CAM]m7_vd6869_vreg_on: CAM_PIN_GPIO_MCAM_D1V2_EN (0)
- [ 2.071661] c0 1 [CAM] m7_vd6869_vreg_on: CAM_PIN_GPIO_CAM_SEL (0)
- [ 2.073065] c0 1 [CAM] msm_sensor_set_power_up: called 1725
- [ 2.081672] c0 1 [CAM] vd6869_sensor_open_init vd6869_s_ctrl->sensordata->sensor_cut=1
- [ 2.082099] c0 1 [CAM] vd6869_sensor_open_init,vd6869_s_ctrl.mirror_flip=3,data->sensor_platform_info->mirror_flip=3
- [ 2.082618] c0 1 [CAM] vd6869_sensor_open_init,sensor_mount_angle=0
- [ 2.082984] c0 1 [CAM] vd6869_sensor_open_init,vd6869_s_ctrl.driver_ic=0
- [ 2.083351] c0 1 [CAM] vd6869_s_ctrl.ews_enable=0
- [ 2.083656] c0 1 [CAM] vd6869 apply cut 10 setting
- [ 2.087349] c1 33 usb 1-1: new high-speed USB device number 2 using msm_hsic_host
- [ 2.092049] c0 1 [CAM] vd6869_cut10_init_otp OTP table init done
- [ 2.114207] c0 1 [CAM] vd6869_shut_down_otp shut down OTP success 0x4584:0x0
- [ 2.115092] c0 1 [CAM] vd6869_shut_down_otp shut down OTP success 0x44c0:0x0
- [ 2.115977] c0 1 [CAM] vd6869_shut_down_otp shut down OTP success 0x4500:0x0
- [ 2.117106] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b8 = 0x0
- [ 2.118754] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b9 = 0x0
- [ 2.120341] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3ba = 0x0
- [ 2.121928] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3bb = 0x0
- [ 2.122691] c1 33 usb 1-1: New USB device found, idVendor=05c6, idProduct=9008
- [ 2.123149] c1 33 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.123271] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3bc = 0x0
- [ 2.123943] c1 33 usb 1-1: Product: QHSUSB__BULK
- [ 2.124034] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x388 = 0x0
- [ 2.124584] c1 33 usb 1-1: Manufacturer: Qualcomm CDMA Technologies MSM
- [ 2.124767] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x389 = 0x0
- [ 2.125499] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x38a = 0x0
- [ 2.126567] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3bd = 0x0
- [ 2.127849] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3be = 0x0
- [ 2.131146] c0 33 qcserial 1-1:1.0: Qualcomm USB modem converter detected
- [ 2.133160] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b0 = 0x0
- [ 2.134106] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b1 = 0x0
- [ 2.135052] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b2 = 0x0
- [ 2.136334] c0 33 usb 1-1: Qualcomm USB modem converter now attached to ttyUSB0
- [ 2.137311] c1 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b3 = 0x0
- [ 2.138287] c1 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b4 = 0x0
- [ 2.139386] c1 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b5 = 0x0
- [ 2.140332] c1 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b6 = 0x0
- [ 2.141309] c1 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b7 = 0x0
- [ 2.142255] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d8 = 0x0
- [ 2.143232] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d9 = 0x0
- [ 2.144147] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3da = 0x0
- [ 2.145093] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3db = 0x0
- [ 2.146039] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3dc = 0x0
- [ 2.147291] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x380 = 0x0
- [ 2.148237] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x381 = 0x0
- [ 2.149183] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x382 = 0x0
- [ 2.150099] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3dd = 0x0
- [ 2.151045] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3de = 0x0
- [ 2.151991] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d0 = 0x0
- [ 2.152907] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d1 = 0x0
- [ 2.153853] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d2 = 0x0
- [ 2.154799] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d3 = 0x0
- [ 2.155745] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d4 = 0x0
- [ 2.157240] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d5 = 0x0
- [ 2.158309] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d6 = 0x0
- [ 2.159316] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d7 = 0x0
- [ 2.160323] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c8 = 0x1
- [ 2.161300] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c9 = 0x1
- [ 2.162307] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3ca = 0x10
- [ 2.163345] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3cb = 0x1
- [ 2.164321] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3cc = 0x5
- [ 2.165328] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3a0 = 0xd6
- [ 2.166336] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3a1 = 0x80
- [ 2.167739] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3a2 = 0x0
- [ 2.168747] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3cd = 0x0
- [ 2.169754] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3ce = 0x0
- [ 2.170730] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c0 = 0x0
- [ 2.171738] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c1 = 0x2e
- [ 2.172745] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c2 = 0x0
- [ 2.173752] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c3 = 0x9e
- [ 2.174790] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c4 = 0x1
- [ 2.175766] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c5 = 0x6f
- [ 2.176804] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c6 = 0x0
- [ 2.178177] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c7 = 0x0
- [ 2.178574] c0 1 [CAM] vd6869_read_otp_valid_layer: OTP valid layer = 0
- [ 2.180161] c0 1 [CAM] module_vendor = 0x1
- [ 2.180436] c0 1 [CAM] driver_ic = 0x1
- [ 2.180711] c0 1 [CAM] vd6869_read_fuseid: driver_ic=1
- [ 2.181016] c0 1 [CAM] index=0 actuator_info->board_info->type=rumbas_act
- [ 2.181413] c0 1 [CAM] vd6869_read_fuseid: sdata->actuator_info->board_info->type=rumbas_act
- [ 2.181840] c0 1 [CAM] vd6869_read_fuseid: sdata->actuator_info->board_info->addr=0x32
- [ 2.182939] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x388 = 0x0
- [ 2.183946] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x389 = 0x0
- [ 2.184953] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b0 = 0x0
- [ 2.185930] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b1 = 0x0
- [ 2.186967] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b2 = 0x0
- [ 2.187913] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b3 = 0x0
- [ 2.188829] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b4 = 0x0
- [ 2.189775] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b5 = 0x0
- [ 2.190691] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b6 = 0x0
- [ 2.191606] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b7 = 0x0
- [ 2.192553] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b8 = 0x0
- [ 2.193468] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b9 = 0x0
- [ 2.194414] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3ba = 0x0
- [ 2.195330] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3bb = 0x0
- [ 2.196276] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3bc = 0x0
- [ 2.197497] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3bd = 0x0
- [ 2.198473] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3be = 0x0
- [ 2.199481] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3bf = 0x0
- [ 2.200457] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x380 = 0x0
- [ 2.201434] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x381 = 0x0
- [ 2.202441] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d0 = 0x0
- [ 2.203418] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d1 = 0x0
- [ 2.204394] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d2 = 0x0
- [ 2.205402] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d3 = 0x0
- [ 2.206378] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d4 = 0x0
- [ 2.207752] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d5 = 0x0
- [ 2.208728] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d6 = 0x0
- [ 2.209735] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d7 = 0x0
- [ 2.210712] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d8 = 0x0
- [ 2.211689] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d9 = 0x0
- [ 2.212696] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3da = 0x0
- [ 2.213673] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3db = 0x0
- [ 2.214649] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3dc = 0x0
- [ 2.215626] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3dd = 0x0
- [ 2.216633] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3de = 0x0
- [ 2.217915] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3df = 0x0
- [ 2.218861] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3a0 = 0xd6
- [ 2.219777] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3a1 = 0x80
- [ 2.220723] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c0 = 0x0
- [ 2.221638] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c1 = 0x2e
- [ 2.222585] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c2 = 0x0
- [ 2.223500] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c3 = 0x9e
- [ 2.224446] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c4 = 0x1
- [ 2.225362] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c5 = 0x6f
- [ 2.226308] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c6 = 0x0
- [ 2.227926] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c7 = 0x0
- [ 2.228902] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c8 = 0x1
- [ 2.229909] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c9 = 0x1
- [ 2.230886] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3ca = 0x10
- [ 2.231893] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3cb = 0x1
- [ 2.232870] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3cc = 0x5
- [ 2.233847] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3cd = 0x0
- [ 2.234854] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3ce = 0x0
- [ 2.235830] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3cf = 0xf0
- [ 2.236197] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP valid layer = 0
- [ 2.237387] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3f4 = 0x0
- [ 2.238394] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3f5 = 0x0
- [ 2.239371] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3f6 = 0x0
- [ 2.240378] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3f7 = 0x1
- [ 2.241385] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3f8 = 0xc5
- [ 2.242362] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3f9 = 0x34
- [ 2.243369] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3fa = 0x50
- [ 2.244346] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3fb = 0x86
- [ 2.245383] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3fc = 0x5c
- [ 2.246360] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3fd = 0x6
- [ 2.247733] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3fe = 0x22
- [ 2.248741] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3ff = 0x39
- [ 2.249717] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd0 = 0x0
- [ 2.250724] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd1 = 0x0
- [ 2.251732] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd2 = 0x0
- [ 2.252708] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd3 = 0x0
- [ 2.253715] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd4 = 0x0
- [ 2.254692] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd5 = 0x0
- [ 2.255699] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd6 = 0x0
- [ 2.256706] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd7 = 0x0
- [ 2.258080] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd8 = 0x0
- [ 2.259056] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd9 = 0x0
- [ 2.260064] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xda = 0x0
- [ 2.261040] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xdb = 0x0
- [ 2.262047] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xdc = 0x0
- [ 2.263024] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xdd = 0x0
- [ 2.264031] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xde = 0x0
- [ 2.265038] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xdf = 0x0
- [ 2.266015] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe0 = 0x0
- [ 2.267144] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe1 = 0x0
- [ 2.268121] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe2 = 0x0
- [ 2.269128] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe3 = 0x0
- [ 2.270105] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe4 = 0x0
- [ 2.271112] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe5 = 0x0
- [ 2.272119] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe6 = 0x0
- [ 2.273096] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe7 = 0x0
- [ 2.274103] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe8 = 0x0
- [ 2.275080] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe9 = 0x0
- [ 2.276087] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xea = 0x0
- [ 2.277124] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xeb = 0x0
- [ 2.278101] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xec = 0x0
- [ 2.279108] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xed = 0x0
- [ 2.280115] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xee = 0x0
- [ 2.281092] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xef = 0x0
- [ 2.282099] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xfc = 0x0
- [ 2.283076] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xfd = 0x0
- [ 2.284083] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb0 = 0x0
- [ 2.285060] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb1 = 0x0
- [ 2.286067] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb2 = 0x0
- [ 2.287166] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb3 = 0x0
- [ 2.288112] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb4 = 0x0
- [ 2.289058] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb5 = 0x0
- [ 2.289974] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb6 = 0x0
- [ 2.290920] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb7 = 0x0
- [ 2.291866] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb8 = 0x0
- [ 2.292781] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb9 = 0x0
- [ 2.293728] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xba = 0x0
- [ 2.294643] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xbb = 0x0
- [ 2.295589] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xbc = 0x0
- [ 2.296535] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xbd = 0x0
- [ 2.298122] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xbe = 0x0
- [ 2.299130] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xbf = 0x0
- [ 2.300137] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc0 = 0x0
- [ 2.301113] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc1 = 0x0
- [ 2.302121] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc2 = 0x0
- [ 2.303128] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc3 = 0x0
- [ 2.304104] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc4 = 0x0
- [ 2.305112] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc5 = 0x0
- [ 2.306088] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc6 = 0x0
- [ 2.307065] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc7 = 0x0
- [ 2.308072] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc8 = 0x0
- [ 2.309079] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc9 = 0x0
- [ 2.310086] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xca = 0x0
- [ 2.311094] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xcb = 0x0
- [ 2.312070] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xcc = 0x0
- [ 2.313077] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xcd = 0x0
- [ 2.314054] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xce = 0x0
- [ 2.315061] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xcf = 0x0
- [ 2.316068] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xf8 = 0x0
- [ 2.317137] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xf9 = 0x0
- [ 2.318144] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x90 = 0x0
- [ 2.319151] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x91 = 0x0
- [ 2.320128] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x92 = 0x0
- [ 2.321135] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x93 = 0x0
- [ 2.322142] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x94 = 0x0
- [ 2.323119] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x95 = 0x0
- [ 2.324126] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x96 = 0x0
- [ 2.325103] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x97 = 0x0
- [ 2.326110] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x98 = 0x0
- [ 2.327178] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x99 = 0x0
- [ 2.328185] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x9a = 0x0
- [ 2.329192] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x9b = 0x0
- [ 2.330169] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x9c = 0x0
- [ 2.331176] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x9d = 0x0
- [ 2.332153] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x9e = 0x0
- [ 2.333160] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x9f = 0x0
- [ 2.334167] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa0 = 0x0
- [ 2.335144] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa1 = 0x0
- [ 2.336151] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa2 = 0x0
- [ 2.337372] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa3 = 0x0
- [ 2.338348] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa4 = 0x0
- [ 2.339356] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa5 = 0x0
- [ 2.340332] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa6 = 0x0
- [ 2.341339] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa7 = 0x0
- [ 2.342347] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa8 = 0x0
- [ 2.343323] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa9 = 0x0
- [ 2.344330] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xaa = 0x0
- [ 2.345307] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xab = 0x0
- [ 2.346314] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xac = 0x0
- [ 2.347688] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xad = 0x0
- [ 2.348664] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xae = 0x0
- [ 2.349671] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xaf = 0x0
- [ 2.350679] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xf0 = 0x0
- [ 2.351655] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xf4 = 0x0
- [ 2.352052] c0 1 [CAM] vd6869_read_fuseid_sharp: OTP OIS valid layer = -1
- [ 2.352449] c0 1 [CAM] vd6869_year_mon=0xd6
- [ 2.352723] c0 1 [CAM] vd6869_date=0x80
- [ 2.352998] c0 1 [CAM] vd6869_read_fuseid_sharp: VenderID=1,LensID=1,SensorID=10, DriverId=01
- [ 2.353486] c0 1 [CAM] vd6869_read_fuseid_sharp: ModuleFuseID= 00000001c53450865c062239
- [ 2.353914] c0 1 [CAM] vd6869: fuse->fuse_id_word1:0
- [ 2.354219] c0 1 [CAM] vd6869: fuse->fuse_id_word2:0x00000001
- [ 2.354555] c0 1 [CAM] vd6869: fuse->fuse_id_word3:0xc5345086
- [ 2.354890] c0 1 [CAM] vd6869: fuse->fuse_id_word4:0x5c062239
- [ 2.355196] c0 1 [CAM] vd6869: VCM START:0x2e
- [ 2.355470] c0 1 [CAM] vd6869: Infinity position:0x9e
- [ 2.355775] c0 1 [CAM] vd6869: Macro position:0x16f
- [ 2.356081] c0 1 [CAM] VCM_START_MSB =0x0
- [ 2.356355] c0 1 [CAM] VCM_START_LSB =0x2e
- [ 2.356600] c0 1 [CAM] AF_INF_MSB =0x0
- [ 2.357179] c0 1 [CAM] AF_INF_LSB =0x9e
- [ 2.357454] c0 1 [CAM] AF_MACRO_MSB =0x1
- [ 2.357698] c0 1 [CAM] AF_MACRO_LSB =0x6f
- [ 2.357973] c0 1 [CAM] ACT_ID =0x5
- [ 2.358889] c0 1 [CAM] msm_sensor_match_id: msm_sensor id: 0x365,expect sensor_id=0x365
- [ 2.360415] c0 1 [CAM] msm_actuator_probe: actuator_info->board_info->type=rumbas_act
- [ 2.360842] c0 1 [CAM] msm_actuator_probe: actuator_info->board_info->addr=0x32
- [ 2.364474] c0 1 [CAM] msm_sensor_register mctl_node_name[0] = video1
- [ 2.364932] c0 1 [CAM] vd6869_power_down called
- [ 2.365237] c0 1 [CAM] msm_sensor_set_power_down: called 1759
- [ 2.367282] c0 1 [CAM] m7_vd6869_vreg_off
- [ 2.367587] c0 1 [CAM] m7_vd6869_vreg_off: CAM_PIN_GPIO_CAM_SEL (0)
- [ 2.368014] c0 1 [CAM] I/O 1v2 gpio_request,176 rc(0)
- [ 2.378452] c0 1 [CAM] m7_vd6869_vreg_off: 8921_l9 off
- [ 2.379581] c0 1 [CAM] m7_vd6869_vreg_off: 8921_l8 off
- [ 2.411933] c0 1 [CAM] check_yushanII_flag() , With yushanII
- [ 2.422340] c0 1 [CAM] YushanII_power_down
- [ 2.423775] c0 1 [CAM] m7_rawchip_vreg_off
- [ 2.426980] c0 1 [CAM] m7_rawchip_vreg_off: 8921_lvs1 1800000-off
- [ 2.428261] c0 1 [CAM] msm_camio_config_gpio_table: no cam gpio config table
- [ 2.428689] c0 1 [CAM] vd6869_sysfs_init: vd6869:kobject creat and add
- [ 2.429116] c0 1 [CAM] vd6869:sysfs_create_file
- [ 2.429482] c0 1 [CAM] vd6869_i2c_probe: rc(0)
- [ 2.430184] c0 1 [CAM] msm_sensor_init_module
- [ 2.431100] c0 1 [CAM] ov2722 msm_sensor_init_module
- [ 2.431832] c0 1 [CAM] ov2722_i2c_probe
- [ 2.432107] c0 1 [CAM] msm_sensor_i2c_probe: sensor_i2c_probe called - name: ov2722
- [ 2.432565] c0 1 [CAM] msm_camio_probe_on_bootup: sinfo sensor name - ov2722
- [ 2.432962] c0 1 [CAM] msm_camio_probe_on_bootup: camio_clk m(24000000) v(228570000)
- [ 2.433511] c0 1 [CAM] msm_camio_config_gpio_table: no cam gpio config table
- [ 2.433908] c0 1 [CAM] YushanII_probe_init
- [ 2.434182] c0 1 [CAM] m7_rawchip_vreg_on
- [ 2.434457] c0 1 [CAM] m7_rawchip_vreg_on: 8921_lvs1 1800000
- [ 2.434945] c0 1 8921_lvs1: Failed to create debugfs directory
- [ 2.436014] c0 1 [CAM] m7_rawchip_vreg_on: 8921_lvs1 1800000 (0)
- [ 2.441385] c0 1 [CAM] m7_rawchip_vreg_on: 8921_s2 1200000
- [ 2.441904] c0 1 8921_s2: Failed to create debugfs directory
- [ 2.443216] c0 1 [CAM] m7_rawchip_vreg_on: 8921_s2 1200000 (0)
- [ 2.449595] c0 1 [CAM] rawchip external 1v2 gpio_request,177 rc(0)
- [ 2.450144] c0 1 [CAM] msm_camio_clk_enable: clk(c0d4dcb8) obj.name:4-0036
- [ 2.461742] c1 1 [CAM] YushanII_match_id, YushanII id: 0x4100110c requested id: 0x4100110c
- [ 2.462231] c1 1 [CAM] YushanII_probe_init: probe_success
- [ 2.462566] c1 1 [CAM] msm_sensor_i2c_probe rawhchip probe init success
- [ 2.462933] c1 1 [CAM] msm_sensor_i2c_probe: update htc_image to 1
- [ 2.463268] c1 1 [CAM] m7_yushanii_probed htc_image 1
- [ 2.463604] c1 1 [CAM] update_yushanII_flag() , htc_image=1
- [ 2.463970] c1 1 [CAM] ov2722_power_up
- [ 2.464245] c1 1 [CAM] m7_ov2722_vreg_on
- [ 2.466595] c1 1 [CAM] check_yushanII_flag() , With yushanII
- [ 2.518388] c1 1 [CAM] m7_ov2722_vreg_on: 8921_lvs4 1800000
- [ 2.518907] c1 1 8921_lvs4: Failed to create debugfs directory
- [ 2.520036] c0 1 [CAM] m7_ov2722_vreg_on: 8921_lvs4 1800000 (0)
- [ 2.525408] c0 1 [CAM] m7_ov2722_vreg_on: 8921_l8 2800000
- [ 2.525927] c0 1 8921_l8: Failed to create debugfs directory
- [ 2.527239] c0 1 [CAM] m7_ov2722_vreg_on: 8921_l8 2800000 (0)
- [ 2.532611] c0 1 [CAM] m7_ov2722_vreg_on: CAM_PIN_GPIO_CAM_SEL (0)
- [ 2.544422] c0 1 [CAM] ov2722_power_up end
- [ 2.545490] c0 1 [CAM] msm_sensor_match_id: msm_sensor id: 0x2722,expect sensor_id=0x2722
- [ 2.546009] c0 1 [CAM] msm_actuator_probe: probe failed
- [ 2.549488] c0 1 [CAM] msm_sensor_register mctl_node_name[1] = video3
- [ 2.549916] c0 1 [CAM] ov2722_power_down
- [ 2.550190] c0 1 [CAM] m7_ov2722_vreg_off
- [ 2.553517] c0 1 [CAM] m7_ov2722_vreg_off: CAM_PIN_GPIO_CAM_SEL (0)
- [ 2.556935] c0 1 [CAM] m7_ov2722_vreg_off: 8921_l8 off
- [ 2.589195] c0 1 [CAM] check_yushanII_flag() , With yushanII
- [ 2.590538] c0 1 [CAM] YushanII_power_down
- [ 2.591973] c0 1 [CAM] m7_rawchip_vreg_off
- [ 2.595177] c0 1 [CAM] m7_rawchip_vreg_off: 8921_lvs1 1800000-off
- [ 2.596459] c0 1 [CAM] msm_camio_config_gpio_table: no cam gpio config table
- [ 2.597100] c0 1 [CAM] ov2722:kobject creat and add
- [ 2.597497] c0 1 [CAM] ov2722:sysfs_create_file
- [ 2.597863] c0 1 [CAM] ov2722_i2c_probe: rc(0)
- [ 2.618647] c0 1 [swfa] swfa_init: SW-MM-A-2013-0314-1600-v0001
- [ 2.633602] c0 1 [BATT][CCADC] r_sense=10
- [ 2.644101] c0 1 pm8xxx_adc_probe: failed to request pa_therm vreg with error -517
- [ 2.644559] c0 1 m7_pm8xxx_adc_device_register: Register PM8XXX ADC device. rev: 128
- [ 2.648802] c0 1 [CABLE] usb_id_detect_init: id pin 158
- [ 2.649320] c0 1 [CABLE] m7_config_usb_id_gpios: 7 input none pull
- [ 2.655089] c0 1 [THERMAL] thermal_sys: thermal_zone0: Current temperature (34 C)
- [ 2.655547] c0 1 [THERMAL] thermal_sys: trip_temp:-77, type:3
- [ 2.655882] c0 1 [THERMAL] thermal_sys: trip_temp:185, type:4
- [ 2.656249] c0 1 [THERMAL] thermal_sys: trip_temp:17, type:5
- [ 2.656584] c0 1 [THERMAL] thermal_sys: trip_temp:-77, type:6
- [ 2.659331] c0 1 [THERMAL] thermal_sys: thermal_zone1: Current temperature (34 C)
- [ 2.659789] c0 1 [THERMAL] thermal_sys: trip_temp:-79, type:3
- [ 2.660125] c0 1 [THERMAL] thermal_sys: trip_temp:183, type:4
- [ 2.660460] c0 1 [THERMAL] thermal_sys: trip_temp:15, type:5
- [ 2.660796] c0 1 [THERMAL] thermal_sys: trip_temp:-79, type:6
- [ 2.662994] c0 1 [THERMAL] thermal_sys: thermal_zone2: Current temperature (33 C)
- [ 2.663421] c0 1 [THERMAL] thermal_sys: trip_temp:-78, type:3
- [ 2.663787] c0 1 [THERMAL] thermal_sys: trip_temp:179, type:4
- [ 2.664123] c0 1 [THERMAL] thermal_sys: trip_temp:14, type:5
- [ 2.664459] c0 1 [THERMAL] thermal_sys: trip_temp:-78, type:6
- [ 2.666625] c0 1 [THERMAL] thermal_sys: thermal_zone3: Current temperature (34 C)
- [ 2.667297] c0 1 [THERMAL] thermal_sys: trip_temp:-77, type:3
- [ 2.667663] c0 1 [THERMAL] thermal_sys: trip_temp:185, type:4
- [ 2.667999] c0 1 [THERMAL] thermal_sys: trip_temp:17, type:5
- [ 2.668335] c0 1 [THERMAL] thermal_sys: trip_temp:-77, type:6
- [ 2.670532] c0 1 [THERMAL] thermal_sys: thermal_zone4: Current temperature (33 C)
- [ 2.670959] c0 1 [THERMAL] thermal_sys: trip_temp:-90, type:3
- [ 2.671326] c0 1 [THERMAL] thermal_sys: trip_temp:158, type:4
- [ 2.671661] c0 1 [THERMAL] thermal_sys: trip_temp:-1, type:5
- [ 2.671997] c0 1 [THERMAL] thermal_sys: trip_temp:-90, type:6
- [ 2.674164] c0 1 [THERMAL] thermal_sys: thermal_zone5: Current temperature (31 C)
- [ 2.674591] c0 1 [THERMAL] thermal_sys: trip_temp:-76, type:3
- [ 2.674927] c0 1 [THERMAL] thermal_sys: trip_temp:176, type:4
- [ 2.675293] c0 1 [THERMAL] thermal_sys: trip_temp:14, type:5
- [ 2.675629] c0 1 [THERMAL] thermal_sys: trip_temp:-76, type:6
- [ 2.678101] c0 1 [THERMAL] thermal_sys: thermal_zone6: Current temperature (32 C)
- [ 2.678528] c0 1 [THERMAL] thermal_sys: trip_temp:-88, type:3
- [ 2.678864] c0 1 [THERMAL] thermal_sys: trip_temp:165, type:4
- [ 2.679230] c0 1 [THERMAL] thermal_sys: trip_temp:3, type:5
- [ 2.679536] c0 1 [THERMAL] thermal_sys: trip_temp:-88, type:6
- [ 2.681825] c0 1 [THERMAL] thermal_sys: thermal_zone7: Current temperature (36 C)
- [ 2.682252] c0 1 [THERMAL] thermal_sys: trip_temp:-85, type:3
- [ 2.682588] c0 1 [THERMAL] thermal_sys: trip_temp:182, type:4
- [ 2.682954] c0 1 [THERMAL] thermal_sys: trip_temp:11, type:5
- [ 2.683290] c0 1 [THERMAL] thermal_sys: trip_temp:-85, type:6
- [ 2.685487] c0 1 [THERMAL] thermal_sys: thermal_zone8: Current temperature (35 C)
- [ 2.685945] c0 1 [THERMAL] thermal_sys: trip_temp:-81, type:3
- [ 2.686281] c0 1 [THERMAL] thermal_sys: trip_temp:172, type:4
- [ 2.686616] c0 1 [THERMAL] thermal_sys: trip_temp:10, type:5
- [ 2.687562] c0 1 [THERMAL] thermal_sys: trip_temp:-81, type:6
- [ 2.689821] c0 1 [THERMAL] thermal_sys: thermal_zone9: Current temperature (34 C)
- [ 2.690279] c0 1 [THERMAL] thermal_sys: trip_temp:-78, type:3
- [ 2.690614] c0 1 [THERMAL] thermal_sys: trip_temp:189, type:4
- [ 2.690950] c0 1 [THERMAL] thermal_sys: trip_temp:18, type:5
- [ 2.691286] c0 1 [THERMAL] thermal_sys: trip_temp:-78, type:6
- [ 2.693544] c0 1 [THERMAL] thermal_sys: thermal_zone10: Current temperature (36 C)
- [ 2.693972] c0 1 [THERMAL] thermal_sys: trip_temp:-74, type:3
- [ 2.694338] c0 1 [THERMAL] thermal_sys: trip_temp:178, type:4
- [ 2.694674] c0 1 [THERMAL] thermal_sys: trip_temp:16, type:5
- [ 2.695009] c0 1 [THERMAL] thermal_sys: trip_temp:-74, type:6
- [ 2.723088] c0 1 [THERMAL] thermal_sys: thermal_zone11: Current temperature (31 C)
- [ 2.723546] c0 1 [THERMAL] thermal_sys: trip_temp:145, type:3
- [ 2.723882] c0 1 [THERMAL] thermal_sys: trip_temp:125, type:2
- [ 2.724217] c0 1 [THERMAL] thermal_sys: trip_temp:105, type:2
- [ 2.726812] c0 1 [THERMAL] thermal_sys: thermal_zone11: Current temperature (31 C)
- [ 2.727514] c0 1 [THERMAL] thermal_sys: trip_temp:145, type:3
- [ 2.727849] c0 1 [THERMAL] thermal_sys: trip_temp:125, type:2
- [ 2.728216] c0 1 [THERMAL] thermal_sys: trip_temp:105, type:2
- [ 2.729833] c0 1 pm8xxx_tm_probe: OK
- [ 2.737311] c0 1 device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 2.742469] c0 1 cpuidle: using governor ladder
- [ 2.742774] c0 1 cpuidle: using governor menu
- [ 2.745551] c0 1 mmc0: SDCC Version: 0x06000018
- [ 2.750404] c0 1 mmc0: bam physical base=0x12402000
- [ 2.750740] c0 1 mmc0: bam virtual base=0xe60f8000
- [ 2.751075] c0 1 sps:BAM 0x12402000 is registered.
- [ 2.751350] c0 1 mmc0: BAM device registered. bam_handle=0xe42c8a00
- [ 2.752479] c0 1 sps:REVISION of BAM 0xe60f8000 is 0x5.
- [ 2.754829] c0 1 mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
- [ 2.755409] c0 1 mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
- [ 2.755745] c0 1 mmc0: hard_reset
- [ 2.756325] c0 1 mmc0: No card detect facilities available
- [ 2.761819] c0 1 mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
- [ 2.763039] c0 1 mmc0: Controller capabilities: 0x0000039a
- [ 2.763345] c0 1 mmc0: Platform slot type: MMC
- [ 2.764810] c0 1 mmc0: 8 bit data mode enabled
- [ 2.766244] c0 1 mmc0: 4 bit data mode disabled
- [ 2.766549] c0 1 mmc0: polling status mode disabled
- [ 2.767709] c0 1 mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
- [ 2.768564] c0 1 mmc0: Slot eject status = 0
- [ 2.768869] c0 1 mmc0: Power save feature enable = 1
- [ 2.769174] c0 1 mmc0: SPS-BAM data transfer mode available
- [ 2.770883] c0 1 mmc1: SDCC Version: 0x06000018
- [ 2.771646] c0 1 mmc1: bam physical base=0x12182000
- [ 2.771951] c0 1 mmc1: bam virtual base=0xe61fc000
- [ 2.772287] c0 1 sps:BAM 0x12182000 is registered.
- [ 2.772562] c0 1 mmc1: BAM device registered. bam_handle=0xe42c9200
- [ 2.773691] c0 1 sps:REVISION of BAM 0xe61fc000 is 0x5.
- [ 2.775919] c0 1 mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 128
- [ 2.776468] c0 1 mmc1: Qualcomm MSM SDCC-DML at 0x0000000012180800
- [ 2.780528] c0 1 mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,0 dma -1 dmacrcri -1
- [ 2.780985] c0 1 mmc1: Controller capabilities: 0x0000039e
- [ 2.781321] c0 1 mmc1: Platform slot type: SDIO(WIFI)
- [ 2.781626] c0 1 mmc1: 8 bit data mode disabled
- [ 2.781931] c0 1 mmc1: 4 bit data mode enabled
- [ 2.782206] c0 1 mmc1: polling status mode disabled
- [ 2.782542] c0 1 mmc1: MMC clock 400000 -> 192000000 Hz, PCLK 0 Hz
- [ 2.782878] c0 1 mmc1: Slot eject status = 1
- [ 2.783152] c0 1 mmc1: Power save feature enable = 1
- [ 2.783457] c0 1 mmc1: SPS-BAM data transfer mode available
- [ 2.785045] c0 1 [FLT]TPS tps61310 Led Flash driver: init
- [ 2.785716] c0 1 [FLT]TPS tps61310_probe +
- [ 2.788097] c0 1 Registered led device: flashlight
- [ 2.788860] c0 1 [FLT]TPS Flashlight with 1.5A
- [ 2.790538] c0 1 [FLT]TPS tps61310_probe reset pin exist
- [ 2.790874] c0 1 [FLT]TPS tps61310_probe power save pin exist
- [ 2.792400] c0 114 sps:REVISION of BAM 0xe60f8000 is 0x5.
- [ 2.794658] c0 1 [FLT]TPS tps61310_probe no power save pin_2
- [ 2.800579] c0 1 [FLT]TPS tps61310_probe -
- [ 2.806470] c0 1 i2c-core: driver [TPS61310_FLASHLIGHT] using legacy suspend method
- [ 2.807508] c0 1 i2c-core: driver [TPS61310_FLASHLIGHT] using legacy resume method
- [ 2.861345] c1 114 mmc0: ACMD 41 init process fail : resp : 0x0
- [ 2.862688] c0 1 usbcore: registered new interface driver usbhid
- [ 2.863055] c0 1 usbhid: USB HID core driver
- [ 2.870257] c3 1 ashmem: initialized
- [ 2.871753] c3 1 logger: created 256K log 'log_main'
- [ 2.873370] c3 1 logger: created 256K log 'log_events'
- [ 2.874896] c3 1 logger: created 256K log 'log_radio'
- [ 2.876423] c3 1 logger: created 256K log 'log_system'
- [ 2.883045] c3 1 usbcore: registered new interface driver snd-usb-audio
- [ 2.892995] c3 1 [AUD] snd_soc_wcd9310: tabla_probe
- [ 2.894613] c0 114 mmc0: BKOPS already enabled
- [ 2.894979] c0 114 mmc0: cid 45010053454d33324728309566a43070
- [ 2.895345] c0 114 mmc0: csd d00f00320f5903ffffffffff8a40407e
- [ 2.895742] c0 114 mmc0: ext_csd 000000000000000101013f3f01030305
- [ 2.896139] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.896535] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.897543] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.897939] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.898336] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.898733] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.899130] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.899496] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.899893] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.900289] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.900686] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.901083] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.901480] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.901846] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.902243] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.902670] c0 114 mmc0: ext_csd 00000000000000196400000001000a00
- [ 2.903067] c0 114 mmc0: ext_csd 440000000000000e5544440700200804
- [ 2.903464] c0 114 mmc0: ext_csd 0e0120080700130003a3e000000a0a0a
- [ 2.903860] c0 114 mmc0: ext_csd 0a0a0a00444400000319010700020006
- [ 2.904257] c0 114 mmc0: ext_csd 00000000040000000000000000000000
- [ 2.904410] c3 1 [AUD] msm_pcm_voip: msm_pcm_probe: dev name msm-voip-dsp
- [ 2.904898] c0 114 mmc0: ext_csd 00000000500000201f05000001010001
- [ 2.905295] c0 114 mmc0: ext_csd 0000e800000000000000000000000000
- [ 2.905692] c0 114 mmc0: ext_csd 00000000000000000000000000010000
- [ 2.906088] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.906485] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.907065] c0 114 mmc0: ext_csd 02010400000000010100000000000000
- [ 2.907370] c3 1 msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 1 capture sdline 4
- [ 2.907553] c3 1 msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 2 capture ch_mx 2
- [ 2.908347] c0 114 mmc0: ext_csd 006a3535663230000000000000000000
- [ 2.908744] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.909140] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.909537] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.909934] c0 114 mmc0: ext_csd 00000000000000000000000000000000
- [ 2.912589] c0 114 mmc0: set ext_csd.erase_group_def
- [ 2.914909] c3 1 [AUD] snd_soc_qdsp6: msm_pcm_probe: dev name msm-pcm-dsp
- [ 2.918022] c3 1 msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
- [ 2.920555] c3 1 msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
- [ 2.920891] c3 1 adding pm_qos request in low latency driver
- [ 2.921226] c3 1 done adding pm_qos request in low latency driver
- [ 2.923058] c0 114 mmc0: switch to bus width 8
- [ 2.925011] c0 114 mmc0: new high speed DDR MMC card at address 0001
- [ 2.928277] c3 1 [AUD] snd_soc_qdsp6: msm_compr_probe: dev name msm-compr-dsp
- [ 2.930749] c0 114 mmcblk0: mmc0:0001 SEM32G 29.1 GiB
- [ 2.932641] c3 1 msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
- [ 2.940882] c3 1 msm_audio_init: Not the right machine type
- [ 3.020723] c1 114 mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 >
- [ 3.099191] c1 114 mmc_rescan_try_freq: Find a MMC/eMMC card
- [ 3.133648] c0 114 mmc1: ACMD 41 init process fail : resp : 0x0
- [ 3.134289] c0 114 mmc_rescan_try_freq: Can not find a card type. A dummy card ?
- [ 3.161910] c3 1 msm-pcm-routing msm-pcm-routing: ASoC: Failed to create MI2S_UL_HL debugfs file
- [ 3.347169] c3 1 asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- [ 3.351350] c3 1 asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
- [ 3.355531] c3 1 asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
- [ 3.359591] c3 1 asoc: snd-soc-dummy-dai <-> VoIP mapping ok
- [ 3.363192] c3 1 asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
- [ 3.367373] c3 1 asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
- [ 3.371616] c3 1 asoc: snd-soc-dummy-dai <-> PRI_I2S_HOSTLESS mapping ok
- [ 3.374851] c3 1 asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
- [ 3.378788] c3 1 asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
- [ 3.382878] c3 1 asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
- [ 3.394658] c3 1 asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
- [ 3.419197] c3 1 asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
- [ 3.423042] c3 1 asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
- [ 3.427132] c3 1 asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
- [ 3.430947] c3 1 asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
- [ 3.434793] c3 1 asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
- [ 3.438699] c3 1 asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
- [ 3.442179] c3 1 asoc: msm-stub-tx <-> msm-dai-q6.1 mapping ok
- [ 3.445566] c3 1 asoc: msm-stub-rx <-> msm-dai-q6-mi2s mapping ok
- [ 3.449931] c3 1 asoc: msm-stub-tx <-> msm-dai-q6-mi2s mapping ok
- [ 3.453410] c3 1 asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
- [ 3.457500] c3 1 asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
- [ 3.461193] c3 1 asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
- [ 3.464825] c3 1 asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
- [ 3.469067] c3 1 asoc: tabla_rx2 <-> msm-dai-stub mapping ok
- [ 3.472089] c3 1 asoc: tabla_tx1 <-> msm-dai-stub mapping ok
- [ 3.475782] c3 1 asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
- [ 3.477063] c0 147 [HS_1WIRE] (onewire_init_work_func) Open /dev/ttyHSL4
- [ 3.477460] c0 147 [HS_1WIRE] (openFile) Open: fp count = 1
- [ 3.478040] c0 147 [HS_1WIRE] (onewire_init_work_func) No private data
- [ 3.478437] c0 147 [HS_1WIRE] (closeFile) Close: fp count = 0
- [ 3.480421] c3 1 asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
- [ 3.483686] c3 1 asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
- [ 3.486525] c3 1 asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
- [ 3.489790] c3 1 asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
- [ 3.492812] c3 1 asoc: tabla_tx3 <-> msm-dai-stub mapping ok
- [ 3.495772] c3 1 asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
- [ 3.500350] c3 1 asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
- [ 3.504959] c3 1 asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
- [ 3.508896] c3 1 asoc: snd-soc-dummy-dai <-> MultiMedia6 mapping ok
- [ 3.513322] c3 1 asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
- [ 3.516648] c3 1 asoc: snd-soc-dummy-dai <-> MultiMedia7 mapping ok
- [ 3.520524] c3 1 asoc: snd-soc-dummy-dai <-> MultiMedia8 mapping ok
- [ 3.524462] c3 1 asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
- [ 3.529406] c3 1 asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
- [ 3.532977] c3 1 asoc: snd-soc-dummy-dai <-> MM_STUB mapping ok
- [ 3.541248] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_STUB_DL not found
- [ 3.541828] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_STUB_DL not found
- [ 3.542377] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_STUB_DL not found
- [ 3.543048] c3 1 soc-audio soc-audio.0: DAI AIF widget for VoLTE_DL not found
- [ 3.543598] c3 1 soc-audio soc-audio.0: DAI AIF widget for VoLTE_DL not found
- [ 3.544147] c3 1 soc-audio soc-audio.0: DAI AIF widget for VoLTE_DL not found
- [ 3.544758] c3 1 soc-audio soc-audio.0: DAI AIF widget for VoLTE_UL not found
- [ 3.545307] c3 1 soc-audio soc-audio.0: DAI AIF widget for VoLTE_UL not found
- [ 3.545856] c3 1 soc-audio soc-audio.0: DAI AIF widget for VoLTE_UL not found
- [ 3.546467] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL8 not found
- [ 3.547199] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL8 not found
- [ 3.547749] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL8 not found
- [ 3.548390] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL7 not found
- [ 3.548939] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL7 not found
- [ 3.549488] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL7 not found
- [ 3.550129] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL4 not found
- [ 3.550679] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL4 not found
- [ 3.551197] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL4 not found
- [ 3.551838] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_UL4 not found
- [ 3.552388] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_UL4 not found
- [ 3.552907] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_UL4 not found
- [ 3.553547] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL6 not found
- [ 3.554097] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL6 not found
- [ 3.554616] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL6 not found
- [ 3.555257] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL5 not found
- [ 3.555806] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL5 not found
- [ 3.556355] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL5 not found
- [ 3.557149] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_UL5 not found
- [ 3.557698] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_UL5 not found
- [ 3.558248] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_UL5 not found
- [ 3.558889] c3 1 soc-audio soc-audio.0: DAI AIF widget for VOICE_STUB_DL not found
- [ 3.559438] c3 1 soc-audio soc-audio.0: DAI AIF widget for VOICE_STUB_DL not found
- [ 3.560018] c3 1 soc-audio soc-audio.0: DAI AIF widget for VOICE_STUB_DL not found
- [ 3.560628] c3 1 soc-audio soc-audio.0: DAI AIF widget for VOICE_STUB_UL not found
- [ 3.561178] c3 1 soc-audio soc-audio.0: DAI AIF widget for VOICE_STUB_UL not found
- [ 3.561727] c3 1 soc-audio soc-audio.0: DAI AIF widget for VOICE_STUB_UL not found
- [ 3.562337] c3 1 soc-audio soc-audio.0: DAI AIF widget for PRI_I2S_DL_HL not found
- [ 3.562917] c3 1 soc-audio soc-audio.0: DAI AIF widget for PRI_I2S_DL_HL not found
- [ 3.563467] c3 1 soc-audio soc-audio.0: DAI AIF widget for PRI_I2S_DL_HL not found
- [ 3.564108] c3 1 soc-audio soc-audio.0: DAI AIF widget for PRI_I2S_UL_HL not found
- [ 3.564657] c3 1 soc-audio soc-audio.0: DAI AIF widget for PRI_I2S_UL_HL not found
- [ 3.565206] c3 1 soc-audio soc-audio.0: DAI AIF widget for PRI_I2S_UL_HL not found
- [ 3.565878] c3 1 soc-audio soc-audio.0: DAI AIF widget for SLIM0_DL_HL not found
- [ 3.566427] c3 1 soc-audio soc-audio.0: DAI AIF widget for SLIM0_DL_HL not found
- [ 3.567190] c3 1 soc-audio soc-audio.0: DAI AIF widget for SLIM0_DL_HL not found
- [ 3.567862] c3 1 soc-audio soc-audio.0: DAI AIF widget for SLIM0_UL_HL not found
- [ 3.568411] c3 1 soc-audio soc-audio.0: DAI AIF widget for SLIM0_UL_HL not found
- [ 3.568991] c3 1 soc-audio soc-audio.0: DAI AIF widget for SLIM0_UL_HL not found
- [ 3.569632] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL3 not found
- [ 3.570181] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL3 not found
- [ 3.570700] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL3 not found
- [ 3.571341] c3 1 soc-audio soc-audio.0: DAI AIF widget for VOIP_DL not found
- [ 3.571890] c3 1 soc-audio soc-audio.0: DAI AIF widget for VOIP_DL not found
- [ 3.572409] c3 1 soc-audio soc-audio.0: DAI AIF widget for VOIP_DL not found
- [ 3.573050] c3 1 soc-audio soc-audio.0: DAI AIF widget for VOIP_UL not found
- [ 3.573599] c3 1 soc-audio soc-audio.0: DAI AIF widget for VOIP_UL not found
- [ 3.574118] c3 1 soc-audio soc-audio.0: DAI AIF widget for VOIP_UL not found
- [ 3.574759] c3 1 soc-audio soc-audio.0: DAI AIF widget for CS-VOICE_DL1 not found
- [ 3.575309] c3 1 soc-audio soc-audio.0: DAI AIF widget for CS-VOICE_DL1 not found
- [ 3.575858] c3 1 soc-audio soc-audio.0: DAI AIF widget for CS-VOICE_DL1 not found
- [ 3.576499] c3 1 soc-audio soc-audio.0: DAI AIF widget for CS-VOICE_UL1 not found
- [ 3.577292] c3 1 soc-audio soc-audio.0: DAI AIF widget for CS-VOICE_UL1 not found
- [ 3.577842] c3 1 soc-audio soc-audio.0: DAI AIF widget for CS-VOICE_UL1 not found
- [ 3.578483] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL2 not found
- [ 3.579032] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL2 not found
- [ 3.579581] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL2 not found
- [ 3.580192] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_UL2 not found
- [ 3.580741] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_UL2 not found
- [ 3.581291] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_UL2 not found
- [ 3.581901] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL1 not found
- [ 3.582450] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL1 not found
- [ 3.583000] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_DL1 not found
- [ 3.583610] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_UL1 not found
- [ 3.584159] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_UL1 not found
- [ 3.584709] c3 1 soc-audio soc-audio.0: DAI AIF widget for MM_UL1 not found
- [ 3.609278] c3 1 input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input10
- [ 3.612818] c3 1 input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input11
- [ 3.645414] c3 1 u32 classifier
- [ 3.645688] c3 1 Actions configured
- [ 3.645994] c3 1 Netfilter messages via NETLINK v0.30.
- [ 3.647001] c3 1 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 3.653227] c3 1 ctnetlink v0.93: registering with nfnetlink.
- [ 3.653960] c3 1 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 3.654356] c3 1 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 3.657469] c3 1 xt_time: kernel timezone is -0000
- [ 3.659087] c3 1 [NET]tcp_init_mem:limit=15460,128UL=128
- [ 3.659453] c3 1 [NET]tcp_init_mem:limit=123680,tcp_mem[0]=92760,tcp_mem[1]=123680,tcp_mem[2]=185520
- [ 3.662017] c3 1 ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.664855] c3 1 arp_tables: (C) 2002 David S. Miller
- [ 3.665832] c3 1 TCP: cubic registered
- [ 3.666107] c3 1 Initializing XFRM netlink socket
- [ 3.671478] c3 1 NET: Registered protocol family 10
- [ 3.676484] c3 1 [NET][IPV6][RULE] fib6_rules_init
- [ 3.676636] c3 1 [NET][IPV6][RULE] fib6_rules_net_init
- [ 3.676972] c3 1 [NET][CORE][RULE] fib_rules_register
- [ 3.677124] c3 1 [NET][CORE][RULE] __fib_rules_register ,owner=(null)
- [ 3.677277] c3 1 [NET][CORE][RULE] fib_default_rule_add ,owner=(null)
- [ 3.677399] c3 1 [NET][CORE][RULE] fib_default_rule_add ,owner=(null)
- [ 3.693972] c3 1 Mobile IPv6
- [ 3.694521] c3 1 ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.697268] c3 1 IPv6 over IPv4 tunneling driver
- [ 3.701113] c3 1 [NET][CORE][RULE] attach_rules
- [ 3.701236] c3 1 [NET][CORE][RULE] attach_rules
- [ 3.703616] c3 1 NET: Registered protocol family 17
- [ 3.704196] c3 1 NET: Registered protocol family 15
- [ 3.704501] c3 1 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 3.705569] c3 1 Registering the dns_resolver key type
- [ 3.707279] c3 1 mipi_m7_device_register
- [ 3.709507] c3 1 [DISP] mipi_cmd_sharp_init
- [ 3.709781] c3 1 [DISP] m7_panel_init panel ID = PANEL_ID_M7_SHARP_RENESAS_CMD
- [ 3.710880] c0 1 [DISP] m7_panel_init: PWM IC version A2
- [ 3.711216] c0 1 [DISP] m7_panel_init
- [ 3.713413] c0 1 setting pdata->panel_info.fb_num to 3. type: 9
- [ 3.784220] c0 1 FrameBuffer[0] 1080x1920 size=25067520 bytes is registered successfully!
- [ 3.787944] c0 1 Registered led device: lcd-backlight
- [ 3.790355] c0 1 [DISP] m7_lcd_probe
- [ 3.814619] c0 1 VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0
- [ 3.815290] c0 1 ThumbEE CPU extension supported.
- [ 3.815687] c0 1 Registering SWP/SWPB emulation handler
- [ 3.949885] c0 1 clock_late_init: Removing enables held for handed-off clocks
- [ 3.958797] c0 1 [smartmax]:cpufreq_governor_smartmax input boost task created
- [ 3.963650] c0 1 [Port list] init()
- [ 3.981138] c0 1 [PM] Acquire 'boot-time' no_halt_lock 60s
- [ 3.985533] c0 1 [PM] msm_pm_init: msm_pm_boot_vector 0xc0d37e4c
- [ 3.988188] c0 27 configure_bark_dump: dogbark processed by TZ side, regsave address = 0x8F1F0000
- [ 3.989775] c0 27 set_bark_bite_time: successfully set WDT0_BARK_TIME to 589824 in 1 milliseconds!
- [ 3.991271] c0 27 set_bark_bite_time: successfully set WDT0_BITE_TIME to 688128 in 1 milliseconds!
- [ 3.993804] c0 27 MSM Watchdog Initialized
- [ 4.000213] c0 1 [AUD] htc-acoustic: acoustic_register_ops
- [ 4.000274] c0 1 m7_audio_init
- [ 4.001434] c0 1 set_restart_reason: set restart reason = 776655aa
- [ 4.001464] c0 1 set_restart_msg: set restart msg = `Unknown'
- [ 4.003296] c0 1 [CPUQUIET]: cpuquiet_input_connect input connect to synaptics-rmi-touchscreen
- [ 4.004669] c0 1 setting pdata->panel_info.fb_num to 1. type: 7
- [ 4.006592] c0 1 FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
- [ 4.007080] c0 1 mdp4_dtv_vsync_init: ndx=0
- [ 4.007233] c0 1 hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group e45b9008
- [ 4.007294] c0 1 hdmi_msm hdmi_msm.1: probe done
- [ 4.007965] c0 1 setting pdata->panel_info.fb_num to 1. type: 10
- [ 4.008179] c0 1 Inside writeback_probe
- [ 4.009705] c0 1 FrameBuffer[2] 1280x720 size=0 bytes is registered successfully!
- [ 4.010560] c0 1 mediator_input_connect input connect to synaptics-rmi-touchscreen
- [ 4.010773] c0 1 rtc-pm8xxx rtc-pm8xxx: setting system clock to 2014-06-02 04:32:12 UTC (1401683532)
- [ 4.010926] c0 1 [BATT][BMS] pm8921_bms_probe
- [ 4.012269] c0 1 [BATT]warn: cur_cell is initiated by htc_battery_cell_find_and_set_id_auto
- [ 4.012299] c0 1 [BATT][BMS] set bms_battery_data (cell_id=1).
- [ 4.013642] c0 1 [BATT][BMS] program rev reg is 0x53
- [ 4.013703] c0 1 [BATT][BMS] trim reg=0x45, trim delta=4
- [ 4.013764] c0 1 [BATT][CHG] pm8921_is_usb_chg_plugged_in: warn: called before init
- [ 4.016297] c0 27 [BATT][CHG] pm8921_is_usb_chg_plugged_in: warn: called before init
- [ 4.018953] c0 1 [BATT][CHG] pm8921_is_usb_chg_plugged_in: warn: called before init
- [ 4.018983] c0 1 read_backup_cc_uv: cc_backup_uv=1468412274, magic=5343405a
- [ 4.019044] c0 1 [BATT][BMS] read_soc_params_raw: last_good_ocv_raw=0x941a, last_good_ocv_uv/ori=3874954uV/3889954uVocv_reading_at_100=0, cc_backup_uv=0, ocv_backup_uv=0, last_ocv_uv=3874954
- [ 4.019136] c0 1 [BATT][BMS] pm8921_store_hw_reset_reason OCV_UPDATE_STORAGE=0x0->0x0
- [ 4.019197] c0 1 [BATT][BMS] OK battery_capacity_at_boot=68, new_boot_soc=0, volt=4009317, ocv=3874954, batt_magic_num=0, stored_soc=0, curr_time=1524194004, stored_time=0
- [ 4.019258] c0 1 [BATT][BMS] r_sense=10,i_test=2000,v_failure=3000,default_rbatt_mohm=250
- [ 4.019655] c0 1 [BATT][CHG] pm8921_apply_19p2mhz_kickstart
- [ 4.020875] c0 1 [BATT][CHG] Init: Set vbatdet=5780
- [ 4.025392] c0 1 [BATT][CHG] pm8921_chg_hw_init: write 0x209 as A4 for PMIC 3.0.1
- [ 4.033725] c0 1 [CABLE] cable_detection_vbus_irq_handler
- [ 4.033786] c0 1 [CABLE] cable_detection_vbus_irq_handler --
- [ 4.035678] c0 27 read_backup_cc_uv: cc_backup_uv=1468412274, magic=5343405a
- [ 4.035739] c0 27 [BATT][BMS] read_soc_params_raw: last_good_ocv_raw=0x941a, last_good_ocv_uv/ori=3880773uV/3895773uVocv_reading_at_100=0, cc_backup_uv=0, ocv_backup_uv=0, last_ocv_uv=3880773
- [ 4.035830] c0 27 [BATT][BMS] start_percent = 68%
- [ 4.035861] c0 27 [BATT][BMS] ocv_update_stop_reason:0x0->0x1
- [ 4.035891] c0 27 [BATT][BMS] stopping ocv updates, is_ocv_update_start=0
- [ 4.037326] c0 1 [BATT][BMS] start_percent = 68%
- [ 4.037814] c0 1 [BATT] htc_charger_event_notify charger event=0
- [ 4.037845] c0 1 [BATT] htc_gauge_event_notify gauge event=0
- [ 4.037936] c0 1 [BATT][CHG] pm8921_charger_probe: max_vbat=4340, cool_vbat=4340, warm_vbat=4000,wlc_tx_gpio=0, vin_min=4400, vin_min_wlc=0
- [ 4.038333] c0 1 [AUD] pm8921_audio: pm8921_audio_probe
- [ 4.039035] c0 1 MSM_DCVS: msm_dcvs_register_core: msm_dcvs_register_core: scm register core fail handle = 1 ret = -22
- [ 4.039096] c0 1 Unable to register core for 0
- [ 4.039157] c0 1 msm_dcvs_gov: probe of msm_dcvs_gov failed with error -22
- [ 4.039615] c0 1 ALSA device list:
- [ 4.039645] c0 1 #0: apq8064-tabla-snd-card
- [ 4.040714] c0 1 Freeing init memory: 1040K
- [ 4.127025] c0 156 [BATT][CHG] pm8921_is_pwr_src_plugged_in: usb_in=1, dc_in=0
- [ 4.127086] c0 156 [CABLE] check_vbus_in: vbus = 0, vbus_in = 1
- [ 4.127147] c0 156 [USB] PMIC: BSV set
- [ 4.127178] c0 156 [USB] PMIC: BSV init complete
- [ 4.127300] c3 18 [USB] b_sess_vld
- [ 4.127636] c3 18 [USBH] msm_chg_detect_work: state:CHG_STATE_UNDEFINED
- [ 4.128032] c3 18 [USB] chg detection work
- [ 4.226888] c3 18 [USBH] msm_chg_detect_work: state:CHG_WAIT_FOR_DCD
- [ 4.226918] c3 18 [USB] chg detection work
- [ 4.263909] c0 199 systemd-udevd[199]: starting version 204
- [ 4.327544] c3 18 [USBH] msm_chg_detect_work: state:CHG_WAIT_FOR_DCD
- [ 4.327605] c3 18 [USB] chg detection work
- [ 4.426980] c3 18 [USBH] msm_chg_detect_work: state:CHG_WAIT_FOR_DCD
- [ 4.427041] c3 18 [USB] chg detection work
- [ 4.526995] c3 18 [USBH] msm_chg_detect_work: state:CHG_WAIT_FOR_DCD
- [ 4.527056] c3 18 [USB] chg detection work
- [ 4.627010] c3 18 [USBH] msm_chg_detect_work: state:CHG_WAIT_FOR_DCD
- [ 4.627071] c3 18 [USB] chg detection work
- [ 4.727086] c3 18 [USBH] msm_chg_detect_work: state:CHG_WAIT_FOR_DCD
- [ 4.727117] c3 18 [USB] chg detection work
- [ 4.777231] c3 18 [USBH] msm_chg_detect_work: state:CHG_DCD_DONE
- [ 4.777292] c3 18 [USB] chg detection work
- [ 4.807141] c3 18 [USBH] msm_chg_detect_work: state:CHG_DETECTED
- [ 4.807172] c3 18 [USB] chg detection work
- [ 4.807324] c3 18 [USB] chg_type = USB_SDP_CHARGER
- [ 4.807355] c3 18 [USB] b_idle work
- [ 4.807385] c2 156 [USBH] send connect type -1
- [ 4.807385] c2 156 [CABLE] usb_status_notifier_func: cable_type = -1
- [ 4.807416] c2 156 [CABLE] send_cable_connect_notify: cable_type = -1
- [ 4.807416] c2 156 [CABLE] Send to: htc_battery_8960, type -1
- [ 4.807416] c2 156 [BATT] cable_status_notifier_func(-1) at 4800384076 (2014-06-02 04:32:13.296337856 UTC)
- [ 4.807446] c2 156 [BATT] unknown type at 4800384076 (2014-06-02 04:32:13.296368363 UTC)
- [ 4.807477] c2 156 [BATT] htc_charger_event_notify charger event=12
- [ 4.807508] c2 156 [BATT] batt_worker: total_time since last batt update = 4380 ms. at 4800445090 (2014-06-02 04:32:13.296429377 UTC)
- [ 4.807599] c3 18 [USB] b_sess_vld
- [ 4.807630] c3 18 [USB] USB fast charging is OFF.
- [ 4.807660] c3 18 [USB] Avail curr from USB = 500
- [ 4.807691] c3 18 [USB] Power Supply doesn't support USB charger
- [ 4.807752] c3 18 [BATT][CHG] Enter charge=500 (deprecated api)
- [ 4.807782] c3 18 [USB] gadget on
- [ 4.810773] c3 18 msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
- [ 4.812269] c2 156 [BATT][BMS] FCC=2300000,UC=69000,RC=1288000,CC=-295806,CC_reset=0,RUC=1514806,SOC=68,SOC_R=2003600,start_percent=68,end_percent=-22,OCV=3880773,OCV_raw=3895773,rbatt=125,rbatt_sf=50,batt_temp=293,soc_rbatt=68,last_rbatt=-22,V_unusable_uv=3250000,pc_unusable=3,rc_pc=56,scalefactor=100,no_ocv_update_ms=800
- [ 4.812421] c2 156 [BATT][CHG] usbin_ov_irq_state:0 -> 0 [0,1,0]
- [ 4.812513] c2 156 [BATT] prev_chg_src=0, prev_chg_en=0, chg_dis_reason/control/active=0x0/0x0/0x0, chg_limit_reason/active=0x0/0x7, pwrsrc_dis_reason=0x0, prev_pwrsrc_enabled=1, context_state=0x0, htc_extension=0x0, sw_stimer_counter=0
- [ 4.812604] c2 156 [BATT] set_pwrsrc_and_charger_enable(6, 6, 1) at 4805570258 (2014-06-02 04:32:13.301524038 UTC)
- [ 4.812665] c2 156 [BATT][CHG] src=6, chg_enable=1, pwrsrc_enable=1
- [ 4.814466] c2 156 [BATT][CHG] pm8921_apply_19p2mhz_kickstart
- [ 4.815656] c2 156 [BATT][CHG] vbus present change: 0 -> 1
- [ 4.829116] c2 156 [BATT][CHG] V=3979 mV, I=65 mA, T=29 C, SoC=68%, FCC=2300000, id=385 mV, H=1, P=1, CHG=3, S=1, FSM=7, AC=0, USB=1, DC=0, WLC=0 iusb_ma=500, usb_target_ma=0, OVP=0, UVP=0, TM=0, eoc_count/by_curr=0/0, vbatdet_low=1, is_ac_ST=0, batfet_dis=0x0, pwrsrc_dis=0x0, is_full=0, temp_fault=0, is_bat_warm/cool=0/0, btm_warm/cool=0/0, ichg=893 uA, vph_pwr=3976902 uV, usbin=4676444 uV, dcin=19632 uV, pwrsrc_under_rating=0, usbin_critical_low_cnt=0 disable_reverse_boost_check=0, flag=0000, hsml_target_ma=0
- [ 4.829665] c2 156 [BATT][CHG] [irq1] 1000 1010 0000 100 [irq2] 0011 0000 0000 011
- [ 4.830367] c2 156 [BATT][CHG] CNTRL=0x85,CNTRL_2=0x72,CNTRL_3=0x88,PBL_ACCESS1=0xa4,PBL_ACCESS2=0x6,SYS_CONFIG_1=0x1,SYS_CONFIG_2=0x58,IBAT_SAFE=0x1a,IBAT_MAX=0x1a,VBAT_DET=0x7f,VDD_SAFE=0x38,VDD_MAX=0x37,VIN_MIN=0x6,VTRICKLE=0xf9,ITRICKLE=0x8f,ITERM=0x0,TCHG_MAX=0x77,TWDOG=0xa0,TEMP_THRESH=0x94,COMP_OVR=0x88,BUCK_CTRL_TEST1=0x1,BUCK_CTRL_TEST2=0x8d,BUCK_CTRL_TEST3=0xf0,CHG_TEST=0xd0,USB_OVP_CONTROL=0x43,USB_OVP_TEST=0xa0,DC_OVP_CONTROL=0x4c,DC_OVP_TEST=0xa0,REGULATION_LOOP_CONTROL=0x0
- [ 4.832137] c2 156 [BATT][BMS] CONTROL=0x99,OUTPUT0=0x75,OUTPUT1=0x00,TOLERANCES=0x03,BMS_TEST1=0x11,OCV_UPDATE_STORAGE=0x00,read_cc=0x-68969735,last_good_ocv=0x3880773,vbatt_for_rbatt=0x0,vsense_for_rbatt=0x0,ocv_for_rbatt=0x0,vsense_avg=0x659, [irq]0010000
- [ 4.832290] c2 156 [BATT][CCADC] ANA_PARAM=0x1a,DIG_PARAM=0xa3,RSV=0x10,DATA0=0xfe,DATA1=0xbb,OFFSET_TRIM1=0x00,OFFSET_TRIM0=0x00,FULLSCALE_TRIM1=0x00,FULLSCALE_TRIM0=0x00
- [ 4.832351] c2 156 [BATT] ID=1,level=68,level_raw=68,vol=3977,temp=293,current=65900,chg_src=6,chg_en=6,full_bat=2300,over_vchg=0,batt_state=1,overload=0,ui_chg_full=0 at 4825338931 (2014-06-02 04:32:13.321231695 UTC)
- [ 4.832534] c2 156 [BATT] power_supply_changed: battery at 4825491468 (2014-06-02 04:32:13.321445247 UTC)
- [ 4.832656] c2 156 [BATT] power_supply_changed: usb at 4825613498 (2014-06-02 04:32:13.321567277 UTC)
- [ 4.832717] c2 156 [BATT] batt_worker: done
- [ 5.217244] c0 27 msm_thermal: setting trip range 0..65 on sensor 0.
- [ 5.221669] c2 1 initrd: mounting /dev/mmcblk0p37
- [ 5.227865] c0 244 EXT4-fs (mmcblk0p37): couldn't mount as ext3 due to feature incompatibilities
- [ 5.238242] c0 244 EXT4-fs (mmcblk0p37): couldn't mount as ext2 due to feature incompatibilities
- [ 7.817793] c3 18 [USBH] ac_detect_expired_work: count = 0, connect_type = -1
- [ 7.859697] c0 244 EXT4-fs (mmcblk0p37): warning: maximal mount count reached, running e2fsck is recommended
- [ 7.861254] c0 244 EXT4-fs (mmcblk0p37): mounted filesystem with writeback data mode. Opts: discard
- [ 7.899160] c0 249 EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities
- [ 7.918754] c0 249 EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
- [ 7.920433] c0 249 EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
- [ 7.921348] c2 1 initrd: mounting system.img (user mode)
- [ 7.926781] c0 253 EXT4-fs (loop0): re-mounted. Opts: (null)
- [ 7.999175] c3 258 EXT4-fs (loop1): couldn't mount as ext3 due to feature incompatibilities
- [ 8.008332] c3 258 EXT4-fs (loop1): couldn't mount as ext2 due to feature incompatibilities
- [ 8.061773] c1 258 EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
- [ 8.151136] c1 1 initrd: device is m7ul
- [ 8.772714] c3 335 initrd: checking mount label mmcblk0p33
- [ 8.795879] c3 335 initrd: checking mount label mmcblk0p34
- [ 8.815107] c0 335 initrd: checking mount label mmcblk0p19
- [ 8.846848] c0 335 initrd: checking mount label mmcblk0p36
- [ 8.879505] c0 335 initrd: checking mount label mmcblk0p31
- [ 8.902151] c0 335 initrd: checking mount label mmcblk0p16
- [ 8.932794] c0 335 initrd: checking mount label usb
- [ 8.941065] c1 1 initrd: mounting /root/var/lib/lxc/android/system.img as /root/android/system
- [ 9.140241] c3 421 Adding 102396k swap on /root/userdata/SWAP.img. Priority:-1 extents:4 across:151548k SS
- [ 9.963314] c0 1 init: ureadahead-touch main process (436) terminated with status 5
- [ 10.007477] c2 156 [BATT] unknown_usb_detect_worker
- [ 10.007508] c2 156 [BATT] htc_charger_event_notify charger event=13
- [ 10.007569] c2 156 [FASTCHARGE] NOT set, using normal CHARGER_UNKNOWN_USB
- [ 10.007630] c2 156 [BATT] batt_worker: total_time since last batt update = 5200 ms. at 10000312230 (2014-06-02 04:32:18.496204886 UTC)
- [ 10.012849] c2 156 [BATT][BMS] FCC=2300000,UC=69000,RC=1288000,CC=-295877,CC_reset=0,RUC=1514877,SOC=68,SOC_R=2010700,start_percent=68,end_percent=-22,OCV=3880773,OCV_raw=3895773,rbatt=125,rbatt_sf=50,batt_temp=294,soc_rbatt=68,last_rbatt=-22,V_unusable_uv=3250000,pc_unusable=3,rc_pc=56,scalefactor=100,no_ocv_update_ms=6000
- [ 10.013032] c2 156 [BATT][CHG] usbin_ov_irq_state:0 -> 0 [0,1,0]
- [ 10.013154] c2 156 [BATT] prev_chg_src=6, prev_chg_en=6, chg_dis_reason/control/active=0x0/0x0/0x0, chg_limit_reason/active=0x0/0x7, pwrsrc_dis_reason=0x0, prev_pwrsrc_enabled=1, context_state=0x0, htc_extension=0x1, sw_stimer_counter=0
- [ 10.013245] c2 156 [BATT] set_pwrsrc_and_charger_enable(7, 7, 1) at 10005893067 (2014-06-02 04:32:18.501816218 UTC)
- [ 10.013337] c2 156 [BATT][CHG] src=7, chg_enable=1, pwrsrc_enable=1
- [ 10.015168] c2 156 [BATT][CHG] pm8921_apply_19p2mhz_kickstart
- [ 10.030062] c2 156 [BATT][CHG] V=3991 mV, I=34 mA, T=29 C, SoC=68%, FCC=2300000, id=386 mV, H=1, P=1, CHG=3, S=1, FSM=7, AC=0, USB=1, DC=0, WLC=0 iusb_ma=500, usb_target_ma=0, OVP=0, UVP=0, TM=0, eoc_count/by_curr=0/0, vbatdet_low=1, is_ac_ST=0, batfet_dis=0x0, pwrsrc_dis=0x0, is_full=0, temp_fault=0, is_bat_warm/cool=0/0, btm_warm/cool=0/0, ichg=694 uA, vph_pwr=3983148 uV, usbin=4637192 uV, dcin=18438 uV, pwrsrc_under_rating=0, usbin_critical_low_cnt=0 disable_reverse_boost_check=0, flag=0000, hsml_target_ma=0
- [ 10.030764] c2 156 [BATT][CHG] [irq1] 1000 1010 0000 100 [irq2] 0011 0000 0000 011
- [ 10.031497] c2 156 [BATT][CHG] CNTRL=0x85,CNTRL_2=0x72,CNTRL_3=0x88,PBL_ACCESS1=0xa4,PBL_ACCESS2=0x6,SYS_CONFIG_1=0x1,SYS_CONFIG_2=0x58,IBAT_SAFE=0x1a,IBAT_MAX=0x1a,VBAT_DET=0x7f,VDD_SAFE=0x38,VDD_MAX=0x37,VIN_MIN=0x6,VTRICKLE=0xf9,ITRICKLE=0x8f,ITERM=0x0,TCHG_MAX=0x77,TWDOG=0xa0,TEMP_THRESH=0x94,COMP_OVR=0x88,BUCK_CTRL_TEST1=0x1,BUCK_CTRL_TEST2=0x8d,BUCK_CTRL_TEST3=0xf0,CHG_TEST=0xd0,USB_OVP_CONTROL=0x43,USB_OVP_TEST=0xa0,DC_OVP_CONTROL=0x4c,DC_OVP_TEST=0xa0,REGULATION_LOOP_CONTROL=0x0
- [ 10.033633] c2 156 [BATT][BMS] CONTROL=0x99,OUTPUT0=0x3d,OUTPUT1=0x00,TOLERANCES=0x03,BMS_TEST1=0x11,OCV_UPDATE_STORAGE=0x00,read_cc=0x-68986272,last_good_ocv=0x3880773,vbatt_for_rbatt=0x0,vsense_for_rbatt=0x0,ocv_for_rbatt=0x0,vsense_avg=0x343, [irq]0000000
- [ 10.033816] c2 156 [BATT][CCADC] ANA_PARAM=0x1a,DIG_PARAM=0xa3,RSV=0x10,DATA0=0xc7,DATA1=0xbb,OFFSET_TRIM1=0x00,OFFSET_TRIM0=0x00,FULLSCALE_TRIM1=0x00,FULLSCALE_TRIM0=0x00
- [ 10.033908] c2 156 [BATT] ID=1,level=68,level_raw=68,vol=3993,temp=294,current=34300,chg_src=7,chg_en=7,full_bat=2300,over_vchg=0,batt_state=1,overload=0,ui_chg_full=0 at 10026570907 (2014-06-02 04:32:18.522433057 UTC)
- [ 10.034121] c2 156 [BATT] power_supply_changed: battery at 10026753903 (2014-06-02 04:32:18.522677052 UTC)
- [ 10.034274] c2 156 [BATT] power_supply_changed: usb at 10026906400 (2014-06-02 04:32:18.522829549 UTC)
- [ 10.034365] c2 156 [BATT] batt_worker: done
- [ 10.487746] c0 27 [HS_PMIC] (irq_init_work_func) Enable detect IRQ
- [ 10.487837] c0 27 [HS_PMIC] (irq_init_work_func) Setup button IRQ type
- [ 11.247978] c0 27 [DISP] init_complete_handler()
- [ 11.248008] c0 27 [DISP] MhlTx: SiiMhlTxInitialize
- [ 11.250267] c0 27 [DISP] Drv: SiiMhlTxChipInitialize: 9244
- [ 11.250816] c0 27 [DISP] SiI 9234
- [ 11.250846] c0 27 [DISP] Drv: WriteInitialRegisterValues
- [ 11.274347] c0 27 [DISP] Drv: MHL 1.0 Compliant Clock
- [ 11.312223] c0 27 [DISP] Drv: InitCBusRegs
- [ 11.317381] c0 27 [DISP] Drv: Switch To D3: pinAllowD3 = 1
- [ 11.635891] c2 1 init: bluetooth-touch main process (641) terminated with status 1
- [ 12.828109] c3 18 [USBH] ac_detect_expired_work: count = 1, connect_type = -1
- [ 14.422066] c0 707 init (707): /proc/707/oom_adj is deprecated, please use /proc/707/oom_score_adj instead.
- [ 14.736303] c1 707 init: cannot open '/initlogo.rle'
- [ 14.761757] c1 707 [PS][cm3629]ps_kadc_store: store value = 0x0, 0xFFFF3C2D
- [ 14.762093] c0 707 [PS]ps_kadc_store: inte_ps1_canc = 0x2D, inte_ps2_canc = 0x3C, lpi->ps_conf1_val = 0x24
- [ 14.820326] c3 707 [NET][CORE][RULE] fib_magic:net_dev name=lo,base_addr=0,irq=0,cmd=24
- [ 14.820357] c3 707 [NET][CORE][RULE] fib_table_insert Insert table=255 7f000001/32
- [ 14.820418] c3 707 [NET][CORE][RULE] fib_magic:net_dev name=lo,base_addr=0,irq=0,cmd=24
- [ 14.820448] c3 707 [NET][CORE][RULE] fib_table_insert Insert table=255 7f000000/8
- [ 14.820509] c3 707 [NET][CORE][RULE] fib_magic:net_dev name=lo,base_addr=0,irq=0,cmd=24
- [ 14.820540] c3 707 [NET][CORE][RULE] fib_table_insert Insert table=255 7f000000/32
- [ 14.820601] c3 707 [NET][CORE][RULE] fib_magic:net_dev name=lo,base_addr=0,irq=0,cmd=24
- [ 14.820631] c3 707 [NET][CORE][RULE] fib_table_insert Insert table=255 7fffffff/32
- [ 14.821089] c3 707 [NET][CORE][RULE] fib_magic:net_dev name=lo,base_addr=0,irq=0,cmd=24
- [ 14.821089] c3 707 [NET][CORE][RULE] fib_table_insert Insert table=255 7f000001/32
- [ 14.821120] c3 707 [NET][CORE][RULE] fib_magic:net_dev name=lo,base_addr=0,irq=0,cmd=24
- [ 14.821150] c3 707 [NET][CORE][RULE] fib_table_insert Insert table=255 7f000000/8
- [ 14.821181] c3 707 [NET][CORE][RULE] fib_magic:net_dev name=lo,base_addr=0,irq=0,cmd=24
- [ 14.821211] c3 707 [NET][CORE][RULE] fib_table_insert Insert table=255 7f000000/32
- [ 14.821242] c3 707 [NET][CORE][RULE] fib_magic:net_dev name=lo,base_addr=0,irq=0,cmd=24
- [ 14.821242] c3 707 [NET][CORE][RULE] fib_table_insert Insert table=255 7fffffff/32
- [ 14.837540] c3 759 healthd: wakealarm_init: timerfd_create failed
- [ 14.839401] c3 759 binder: 759:759 transaction failed 29189, size 0-0, brdr_fp 22
- [ 14.900442] c3 707 init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
- [ 14.900564] c3 707 init: cannot find '/system/bin/ubuntuappmanager.disabled', disabling 'ubuntuappmanager'
- [ 14.921257] c3 707 init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
- [ 14.921471] c3 707 init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
- [ 14.921654] c3 707 init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
- [ 14.950099] c0 777 systemd-udevd[777]: starting version 204
- [ 14.969510] c3 707 enable_store: android_usb: already disabled
- [ 14.970242] c3 707 init: cannot find '/sbin/adbd', disabling 'adbd'
- [ 14.970303] c3 707 init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
- [ 15.502304] c0 1 init: ofono main process (808) terminated with status 1
- [ 15.502365] c0 1 init: ofono main process ended, respawning
- [ 15.664062] c2 1 init: ofono main process (821) terminated with status 1
- [ 15.664153] c2 1 init: ofono main process ended, respawning
- [ 15.695711] c1 772 [COMP][AKM8963] AKECS_GetOpenStatus++
- [ 15.704043] c1 0 [PM] CPU1: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 15.735235] c2 1 init: ofono main process (838) terminated with status 1
- [ 15.735266] c3 769 [CIR] msm_hsl_power_cir (): ir, state 0
- [ 15.735296] c3 769 [CIR] msm_hsl_startup_cir () :port->line 2, ir
- [ 15.735327] c2 1 init: ofono main process ended, respawning
- [ 15.735327] c3 769 [CIR] msm_serial_hsl_has_gsbi: cir uart port[2] is_uartdm=1
- [ 15.735357] c3 769 [CIR] msm_hsl_startup_cir () serial_hsl_has_gsbi:port->line 2, ir
- [ 15.735357] c3 769 [CIR] msm_hsl_init_clock ()ok:port->line 2, ir
- [ 15.735388] c3 769 [CIR] msm_hsl_runtime_resume ():port->line 2, ir
- [ 15.735449] c3 769 [CIR] msm_hsl_set_baud_rate ()baud 9600:port->line 2, ir
- [ 15.735479] c3 769 [CIR] msm_hsl_set_termios_cir: cir MR is 0xc
- [ 15.735479] c3 769 [CIR] msm_hsl_set_termios_cir: cir baud is 9600
- [ 15.735571] c3 769 [CIR] msm_hsl_set_baud_rate ()baud 115200:port->line 2, ir
- [ 15.735602] c3 769 [CIR] msm_hsl_set_termios_cir: cir MR is 0xc
- [ 15.735602] c3 769 [CIR] msm_hsl_set_termios_cir: cir baud is 115200
- [ 15.735632] c0 250 [CIR] wait_for_xmitr ():port->line 2, ir
- [ 15.740454] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 15.747352] c0 668 [CIR] wait_for_xmitr ():port->line 2, ir
- [ 15.777659] c3 0 [PM] CPU3: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 15.808209] c0 769 [CIR] msm_hsl_deinit_clock ()ok:port->line 2, ir
- [ 15.808240] c0 769 [CIR] msm_hsl_runtime_suspend ():port->line 2, ir
- [ 15.808271] c0 769 [CIR] msm_hsl_power_cir (): ir, state 3
- [ 15.833541] c0 769 [CIR] msm_hsl_power_cir (): ir, state 0
- [ 15.833572] c0 769 [CIR] msm_hsl_startup_cir () :port->line 2, ir
- [ 15.833572] c0 769 [CIR] msm_serial_hsl_has_gsbi: cir uart port[2] is_uartdm=1
- [ 15.833602] c0 769 [CIR] msm_hsl_startup_cir () serial_hsl_has_gsbi:port->line 2, ir
- [ 15.833602] c0 769 [CIR] msm_hsl_init_clock ()ok:port->line 2, ir
- [ 15.833633] c0 769 [CIR] msm_hsl_runtime_resume ():port->line 2, ir
- [ 15.833663] c0 769 [CIR] msm_hsl_set_baud_rate ()baud 115200:port->line 2, ir
- [ 15.833694] c0 769 [CIR] msm_hsl_set_termios_cir: cir MR is 0xc
- [ 15.833694] c0 769 [CIR] msm_hsl_set_termios_cir: cir baud is 115200
- [ 15.833786] c0 769 [CIR] wait_for_xmitr ():port->line 2, ir
- [ 15.871020] c0 785 [BT]== R ON ==
- [ 16.007874] c0 769 [CIR] msm_hsl_deinit_clock ()ok:port->line 2, ir
- [ 16.007904] c0 769 [CIR] msm_hsl_runtime_suspend ():port->line 2, ir
- [ 16.007935] c0 769 [CIR] msm_hsl_power_cir (): ir, state 3
- [ 16.087440] c0 762 warning: `rild' uses 32-bit capabilities (legacy support in use)
- [ 16.115397] c0 785 [BT]== R ON ==
- [ 16.208698] c0 1 init: ofono main process (859) terminated with status 1
- [ 16.208728] c0 1 init: ofono main process ended, respawning
- [ 16.430764] c0 847 systemd-udevd[847]: Failed to apply ACL on /dev/v4l-subdev0: Operation not supported
- [ 16.432748] c0 858 systemd-logind[858]: cgmanager: cgm_list_children for controller=systemd, cgroup_path=user failed: invalid request
- [ 16.434274] c0 848 systemd-udevd[848]: Failed to apply ACL on /dev/v4l-subdev1: Operation not supported
- [ 16.436227] c0 848 systemd-udevd[848]: Failed to apply ACL on /dev/v4l-subdev3: Operation not supported
- [ 16.437356] c0 847 systemd-udevd[847]: Failed to apply ACL on /dev/v4l-subdev2: Operation not supported
- [ 16.440439] c0 848 systemd-udevd[848]: Failed to apply ACL on /dev/v4l-subdev4: Operation not supported
- [ 16.443430] c0 850 systemd-udevd[850]: Failed to apply ACL on /dev/v4l-subdev7: Operation not supported
- [ 16.444834] c0 850 systemd-udevd[850]: Failed to apply ACL on /dev/v4l-subdev8: Operation not supported
- [ 16.445933] c0 848 systemd-udevd[848]: Failed to apply ACL on /dev/v4l-subdev6: Operation not supported
- [ 16.447245] c0 847 systemd-udevd[847]: Failed to apply ACL on /dev/v4l-subdev5: Operation not supported
- [ 16.447581] c0 858 systemd-logind[858]: New seat seat0.
- [ 16.465313] c0 848 systemd-udevd[848]: Failed to apply ACL on /dev/video100: Operation not supported
- [ 16.479658] c0 759 healthd: battery l=68 v=3 t=29.4 h=2 st=2 chg=u
- [ 16.480177] c0 759 healthd: battery l=68 v=3 t=29.4 h=2 st=2 chg=u
- [ 16.480665] c0 759 healthd: battery l=68 v=3 t=29.4 h=2 st=2 chg=u
- [ 16.481184] c0 759 healthd: battery l=68 v=3 t=29.4 h=2 st=2 chg=u
- [ 16.505569] c0 1 init: ubuntu-location-service main process (739) killed by SEGV signal
- [ 16.505600] c0 1 init: ubuntu-location-service main process ended, respawning
- [ 16.556111] c0 858 systemd-logind[858]: New session c1 of user root.
- [ 16.801770] c0 1 init: urfkill main process (785) terminated with status 1
- [ 16.801800] c0 1 init: urfkill main process ended, respawning
- [ 16.802807] c0 1 init: ofono main process (874) terminated with status 1
- [ 16.802838] c0 1 init: ofono main process ended, respawning
- [ 17.008942] c3 900 adb_open
- [ 17.008972] c3 900 mtp_bind_config
- [ 17.009034] c3 900 adb_bind_config
- [ 17.075324] c2 906 [BT]== R ON ==
- [ 17.090279] c2 906 [BT]== R ON ==
- [ 17.101999] c0 1 init: ubuntu-location-service main process (876) killed by SEGV signal
- [ 17.102029] c0 1 init: ubuntu-location-service main process ended, respawning
- [ 17.138623] c0 155 [USB] USB fast charging is OFF.
- [ 17.138654] c0 155 [USB] Avail curr from USB = 0
- [ 17.138654] c0 155 [USB] Power Supply doesn't support USB charger
- [ 17.138654] c0 155 [BATT][CHG] Enter charge=0 (deprecated api)
- [ 17.138806] c0 27 android_work: android_work: did not send uevent (0 0 (null))
- [ 17.140912] c0 1 [USB] portsc = 88000a05
- [ 17.230917] c0 1 init: ofono main process (914) terminated with status 1
- [ 17.230947] c0 1 init: ofono main process ended, respawning
- [ 17.265222] c0 27 android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 17.266595] c0 919 android_usb gadget: high-speed config #1: android
- [ 17.266656] c0 919 [USB] USB fast charging is OFF.
- [ 17.266656] c0 919 [USB] Avail curr from USB = 500
- [ 17.266656] c0 919 [USB] Power Supply doesn't support USB charger
- [ 17.266656] c0 919 [BATT][CHG] Enter charge=500 (deprecated api)
- [ 17.302304] c0 1 init: ubuntu-location-service main process (915) killed by SEGV signal
- [ 17.302365] c0 1 init: ubuntu-location-service main process ended, respawning
- [ 17.318174] c0 27 android_work: android_work: sent uevent USB_STATE=CONFIGURED
- [ 17.322142] c1 823 [DISP] mipi_dsi_panel_power: on=1
- [ 17.338074] c1 823 [BMA250] Mipi Power On -> calling gyroscope enable 1 (enable)
- [ 17.352662] c1 823 [DISP] m7_lcd_on, PANEL type = PANEL_ID_M7_SHARP_RENESAS_CMD, PWM A2
- [ 17.357973] c1 823 mdp4_calc_req_mdp_clk: src_h is zero!
- [ 17.367221] c1 823 [DISP] m7_display_on
- [ 17.398962] c0 1 init: urfkill main process (906) terminated with status 1
- [ 17.398992] c0 1 init: urfkill main process ended, respawning
- [ 17.400335] c0 1 init: ofono main process (920) terminated with status 1
- [ 17.400396] c0 1 init: ofono main process ended, respawning
- [ 17.438119] c1 891 [DISP] brightness orig=191, transformed=149
- [ 17.514268] c1 1 init: ubuntu-location-service main process (922) killed by SEGV signal
- [ 17.514329] c1 1 init: ubuntu-location-service main process ended, respawning
- [ 17.515122] c2 929 [BT]== R ON ==
- [ 17.529620] c2 929 [BT]== R ON ==
- [ 17.630001] c2 940 [DISP] brightness orig=0, transformed=0
- [ 17.632504] c3 1 init: ofono main process (935) terminated with status 1
- [ 17.632534] c3 1 init: ofono main process ended, respawning
- [ 17.674835] c2 1 init: ubuntu-location-service main process (936) killed by SEGV signal
- [ 17.674896] c2 1 init: ubuntu-location-service main process ended, respawning
- [ 17.715489] c2 1 init: urfkill main process (929) terminated with status 1
- [ 17.715550] c2 1 init: urfkill main process ended, respawning
- [ 17.732519] c2 940 [DISP] m7_display_off
- [ 17.740820] c2 940 [DISP] m7_lcd_off
- [ 17.740851] c2 940 [DISP] mipi_dsi_panel_power: on=0
- [ 17.754768] c2 940 [BMA250] Mipi Power Off -> calling gyroscope enable 0 (disable)
- [ 17.808179] c3 1 init: lightdm main process (748) terminated with status 1
- [ 17.808240] c3 1 init: lightdm main process ended, respawning
- [ 17.809278] c3 1 init: ubuntu-location-service main process (943) killed by SEGV signal
- [ 17.809339] c3 1 init: ubuntu-location-service main process ended, respawning
- [ 17.810346] c3 1 init: ofono main process (942) terminated with status 1
- [ 17.810376] c3 1 init: ofono main process ended, respawning
- [ 17.821425] c1 946 [BT]== R ON ==
- [ 17.836136] c1 946 [BT]== R ON ==
- [ 17.881428] c0 850 systemd-udevd[850]: Failed to apply ACL on /dev/snd/pcmC0D0c: Operation not supported
- [ 17.882954] c0 851 systemd-udevd[851]: Failed to apply ACL on /dev/snd/pcmC0D0p: Operation not supported
- [ 17.884510] c0 853 systemd-udevd[853]: Failed to apply ACL on /dev/snd/pcmC0D1c: Operation not supported
- [ 17.885975] c0 854 systemd-udevd[854]: Failed to apply ACL on /dev/snd/pcmC0D1p: Operation not supported
- [ 17.887501] c0 855 systemd-udevd[855]: Failed to apply ACL on /dev/snd/pcmC0D28c: Operation not supported
- [ 17.889119] c3 856 systemd-udevd[856]: Failed to apply ACL on /dev/snd/pcmC0D2c: Operation not supported
- [ 17.889150] c0 860 systemd-udevd[860]: Failed to apply ACL on /dev/snd/pcmC0D2p: Operation not supported
- [ 17.890065] c2 1 init: urfkill main process (946) terminated with status 1
- [ 17.890126] c2 1 init: urfkill main process ended, respawning
- [ 17.890706] c0 861 systemd-udevd[861]: Failed to apply ACL on /dev/snd/pcmC0D33c: Operation not supported
- [ 17.892354] c0 862 systemd-udevd[862]: Failed to apply ACL on /dev/snd/pcmC0D33p: Operation not supported
- [ 17.900350] c0 850 systemd-udevd[850]: Failed to apply ACL on /dev/snd/pcmC0D34c: Operation not supported
- [ 17.901815] c0 851 systemd-udevd[851]: Failed to apply ACL on /dev/snd/pcmC0D34p: Operation not supported
- [ 17.903250] c0 853 systemd-udevd[853]: Failed to apply ACL on /dev/snd/pcmC0D35p: Operation not supported
- [ 17.904684] c0 854 systemd-udevd[854]: Failed to apply ACL on /dev/snd/pcmC0D36c: Operation not supported
- [ 17.906088] c0 855 systemd-udevd[855]: Failed to apply ACL on /dev/snd/pcmC0D36p: Operation not supported
- [ 17.907584] c3 856 systemd-udevd[856]: Failed to apply ACL on /dev/snd/pcmC0D37p: Operation not supported
- [ 17.907614] c0 860 systemd-udevd[860]: Failed to apply ACL on /dev/snd/pcmC0D38p: Operation not supported
- [ 17.909140] c0 861 systemd-udevd[861]: Failed to apply ACL on /dev/snd/pcmC0D39c: Operation not supported
- [ 17.910727] c0 862 systemd-udevd[862]: Failed to apply ACL on /dev/snd/pcmC0D39p: Operation not supported
- [ 17.916038] c0 848 systemd-udevd[848]: Failed to apply ACL on /dev/snd/pcmC0D3p: Operation not supported
- [ 17.916038] c3 847 systemd-udevd[847]: Failed to apply ACL on /dev/snd/pcmC0D3c: Operation not supported
- [ 17.917411] c0 850 systemd-udevd[850]: Failed to apply ACL on /dev/snd/pcmC0D40c: Operation not supported
- [ 17.919121] c0 851 systemd-udevd[851]: Failed to apply ACL on /dev/snd/pcmC0D40p: Operation not supported
- [ 17.920494] c0 853 systemd-udevd[853]: Failed to apply ACL on /dev/snd/pcmC0D41p: Operation not supported
- [ 17.921837] c0 854 systemd-udevd[854]: Failed to apply ACL on /dev/snd/pcmC0D4p: Operation not supported
- [ 17.923210] c0 855 systemd-udevd[855]: Failed to apply ACL on /dev/snd/pcmC0D5c: Operation not supported
- [ 17.924797] c0 860 systemd-udevd[860]: Failed to apply ACL on /dev/snd/pcmC0D6c: Operation not supported
- [ 17.924828] c3 856 systemd-udevd[856]: Failed to apply ACL on /dev/snd/pcmC0D5p: Operation not supported
- [ 17.926232] c0 861 systemd-udevd[861]: Failed to apply ACL on /dev/snd/pcmC0D6p: Operation not supported
- [ 17.927636] c0 862 systemd-udevd[862]: Failed to apply ACL on /dev/snd/pcmC0D7p: Operation not supported
- [ 17.932488] c3 847 systemd-udevd[847]: Failed to apply ACL on /dev/snd/pcmC0D8c: Operation not supported
- [ 17.932488] c0 848 systemd-udevd[848]: Failed to apply ACL on /dev/snd/pcmC0D9c: Operation not supported
- [ 17.933892] c0 850 systemd-udevd[850]: Failed to apply ACL on /dev/snd/pcmC0D9p: Operation not supported
- [ 17.935876] c0 851 systemd-udevd[851]: Failed to apply ACL on /dev/snd/controlC0: Operation not supported
- [ 17.986479] c1 957 [BT]== R ON ==
- [ 17.987822] c3 1 init: ubuntu-location-service main process (952) killed by SEGV signal
- [ 17.987852] c3 1 init: ubuntu-location-service main process ended, respawning
- [ 17.990202] c3 1 init: ofono main process (956) terminated with status 1
- [ 17.990263] c3 1 init: ofono main process ended, respawning
- [ 18.001037] c1 957 [BT]== R ON ==
- [ 18.049107] c1 1 init: urfkill main process (957) terminated with status 1
- [ 18.049168] c1 1 init: urfkill main process ended, respawning
- [ 18.136914] c1 970 [BT]== R ON ==
- [ 18.144056] c3 1 init: ubuntu-location-service main process (963) killed by SEGV signal
- [ 18.144117] c3 1 init: ubuntu-location-service main process ended, respawning
- [ 18.146711] c3 1 init: ofono main process (969) terminated with status 1
- [ 18.146741] c3 1 init: ofono respawning too fast, stopped
- [ 18.151472] c1 970 [BT]== R ON ==
- [ 18.213551] c3 1 init: urfkill main process (970) terminated with status 1
- [ 18.213581] c3 1 init: urfkill main process ended, respawning
- [ 18.222340] c1 848 systemd-udevd[848]: Failed to apply ACL on /dev/snd/timer: Operation not supported
- [ 18.276423] c0 1 init: ubuntu-location-service main process (976) killed by SEGV signal
- [ 18.276453] c0 1 init: ubuntu-location-service main process ended, respawning
- [ 18.294826] c2 991 [BT]== R ON ==
- [ 18.310178] c2 991 [BT]== R ON ==
- [ 18.336853] c1 855 systemd-udevd[855]: Failed to apply ACL on /dev/video0: Operation not supported
- [ 18.338654] c1 854 systemd-udevd[854]: Failed to apply ACL on /dev/video2: Operation not supported
- [ 18.339935] c1 850 systemd-udevd[850]: Failed to apply ACL on /dev/video1: Operation not supported
- [ 18.341736] c1 854 systemd-udevd[854]: Failed to apply ACL on /dev/video38: Operation not supported
- [ 18.343018] c1 850 systemd-udevd[850]: Failed to apply ACL on /dev/video3: Operation not supported
- [ 18.344513] c1 854 systemd-udevd[854]: Failed to apply ACL on /dev/video39: Operation not supported
- [ 18.359774] c0 1 init: urfkill main process (991) terminated with status 1
- [ 18.359835] c0 1 init: urfkill main process ended, respawning
- [ 18.407324] c0 1 init: ubuntu-location-service main process (1008) killed by SEGV signal
- [ 18.407385] c0 1 init: ubuntu-location-service main process ended, respawning
- [ 18.415138] c2 1017 [BT]== R ON ==
- [ 18.428994] c2 1017 [BT]== R ON ==
- [ 18.477949] c0 1 init: urfkill main process (1017) terminated with status 1
- [ 18.478010] c0 1 init: urfkill main process ended, respawning
- [ 18.535449] c3 1025 [BT]== R ON ==
- [ 18.544422] c0 1 init: ubuntu-location-service main process (1022) killed by SEGV signal
- [ 18.544452] c0 1 init: ubuntu-location-service respawning too fast, stopped
- [ 18.550068] c3 1025 [BT]== R ON ==
- [ 18.598229] c0 1 init: urfkill main process (1025) terminated with status 1
- [ 18.598290] c0 1 init: urfkill main process ended, respawning
- [ 18.649809] c3 1031 [BT]== R ON ==
- [ 18.664031] c3 1031 [BT]== R ON ==
- [ 18.707279] c0 1 init: urfkill main process (1031) terminated with status 1
- [ 18.707340] c0 1 init: urfkill main process ended, respawning
- [ 18.771829] c2 1036 [BT]== R ON ==
- [ 18.788097] c2 1036 [BT]== R ON ==
- [ 18.810224] c3 0 [PM] CPU3: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 18.841324] c0 1 init: urfkill main process (1036) terminated with status 1
- [ 18.841385] c0 1 init: urfkill respawning too fast, stopped
- [ 19.047306] c0 771 [LS][cm3629] lightsensor_open, calibration:1
- [ 19.047337] c0 771 [LS][cm3629] lightsensor_ioctl LIGHTSENSOR_IOCTL_GET_ENABLED, enabled 0
- [ 19.047367] c0 771 [LS][cm3629] lightsensor_release
- [ 19.047398] c0 771 [PS][cm3629] psensor_open, calibration:1
- [ 19.047428] c0 771 [PS][cm3629] psensor_enable_by_touch_driver on:0
- [ 19.047428] c0 771 [PS][cm3629] psensor_disable 0
- [ 19.047459] c0 771 [PS][cm3629] psensor_disable: already disabled
- [ 19.047459] c0 771 [PS][cm3629] psensor_ioctl cmd 1
- [ 19.047672] c0 771 [PS][cm3629] psensor_ioctl cmd 2
- [ 19.047672] c0 771 [PS][cm3629] psensor_disable 0
- [ 19.047703] c0 771 [PS][cm3629] psensor_disable: already disabled
- [ 19.051426] c0 771 [PS][cm3629] psensor_release
- [ 19.160689] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 19.199175] c1 0 [PM] CPU1: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 19.709476] c2 740 request_suspend_state: wakeup (3->0) at 19701464285 (2014-06-02 04:32:28.197417933 UTC)
- [ 20.311063] c3 0 [PM] CPU3: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 20.321257] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 20.420173] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 20.470227] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 20.719059] c0 1 init: failsafe main process (1205) killed by TERM signal
- [ 20.770517] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 21.010590] c1 0 [PM] CPU1: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 21.129314] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 21.170151] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 21.270410] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 21.320280] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 21.374759] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 21.470257] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 21.520097] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 21.580222] c1 1351 [DISP] mipi_dsi_panel_power: on=1
- [ 21.603540] c1 1351 [BMA250] Mipi Power On -> calling gyroscope enable 1 (enable)
- [ 21.620082] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 21.670502] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 21.720128] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 21.758431] c1 1351 [DISP] m7_lcd_on, PANEL type = PANEL_ID_M7_SHARP_RENESAS_CMD, PWM A2
- [ 21.771463] c0 1351 mdp4_calc_req_mdp_clk: src_h is zero!
- [ 21.780466] c0 1351 [DISP] m7_display_on
- [ 21.819960] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 21.870196] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 21.923119] c0 1463 [DISP] m7_display_off
- [ 21.931390] c0 1463 [DISP] m7_lcd_off
- [ 21.931420] c0 1463 [DISP] mipi_dsi_panel_power: on=0
- [ 21.945368] c0 1463 [BMA250] Mipi Power Off -> calling gyroscope enable 0 (disable)
- [ 21.960689] c1 1 init: lightdm main process (1327) terminated with status 1
- [ 21.960750] c1 1 init: lightdm main process ended, respawning
- [ 22.020265] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 22.129833] c1 0 [PM] CPU1: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 22.220387] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
- [ 22.370486] c2 0 [PM] CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement