API tools faq
paste
Guest User

beaglenodt

a guest
Mar 19th, 2013
129
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.16 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2013.01.01 (Mar 13 2013 - 17:06:24)
  2. OMAP SD/MMC: 0
  3. reading u-boot.img
  4. reading u-boot.img
  5.  
  6.  
  7. U-Boot 2013.01.01 (Mar 13 2013 - 17:06:24)
  8.  
  9. OMAP3530-GP ES3.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz
  10. OMAP3 Beagle board + LPDDR/NAND
  11. I2C: ready
  12. DRAM: 256 MiB
  13. NAND: 256 MiB
  14. MMC: OMAP SD/MMC: 0
  15. In: serial
  16. Out: serial
  17. Err: serial
  18. Beagle Rev C1/C2/C3
  19. timed out in wait_for_pin: I2C_STAT=0
  20. No EEPROM on expansion board
  21. Die ID #0a8600030000000004013f780600a00e
  22. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  23. musb-hdrc: MHDRC RTL version 1.400
  24. musb-hdrc: setup fifo_mode 4
  25. musb-hdrc: 28/31 max ep, 16384/16384 memory
  26. USB Peripheral mode controller at 480ab000 using PIO, IRQ 0
  27. Net: usb_ether
  28. OMAP3 beagleboard.org # setenv loadaddr 0x80200000
  29. OMAP3 beagleboard.org # fatload mmc 0:1 ${loadaddr} uImage
  30. reading uImage
  31. 4117336 bytes read in 311 ms (12.6 MiB/s)
  32. OMAP3 beagleboard.org # setenv bootargs console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait earlyprintk
  33. OMAP3 beagleboard.org # bootm
  34. ## Booting kernel from Legacy Image at 80200000 ...
  35. Image Name: Linux-3.9.0-rc3-00048-g80a4a57
  36. Image Type: ARM Linux Kernel Image (uncompressed)
  37. Data Size: 4117272 Bytes = 3.9 MiB
  38. Load Address: 80800000
  39. Entry Point: 80800000
  40. Verifying Checksum ... OK
  41. Loading Kernel Image ... OK
  42. OK
  43.  
  44. Starting kernel ...
  45.  
  46. [ 0.000000] Booting Linux on physical CPU 0x0
  47. [ 0.000000] Linux version 3.9.0-rc3-00048-g80a4a57 (nmenon@kahuna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #5 SMP Tue Mar 19 11:32:55 CDT 2013
  48. [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7d
  49. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  50. [ 0.000000] Machine: OMAP3 Beagle Board
  51. [ 0.000000] cma: CMA: reserved 16 MiB at 8e800000
  52. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  53. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  54. [ 0.000000] OMAP3430/3530 ES3.0 (l2cache iva sgx neon isp )
  55. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
  56. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0f9f000 s14336 r8192 d14336 u36864
  57. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
  58. [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait earlyprintk
  59. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  60. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  61. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  62. [ 0.000000] __ex_table already sorted, skipping sort
  63. [ 0.000000] Memory: 255MB = 255MB total
  64. [ 0.000000] Memory: 228468k/228468k available, 33676k reserved, 0K highmem
  65. [ 0.000000] Virtual kernel memory layout:
  66. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  67. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  68. [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
  69. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  70. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  71. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  72. [ 0.000000] .text : 0xc0008000 - 0xc073fa9c (7391 kB)
  73. [ 0.000000] .init : 0xc0740000 - 0xc0797800 ( 350 kB)
  74. [ 0.000000] .data : 0xc0798000 - 0xc083d768 ( 662 kB)
  75. [ 0.000000] .bss : 0xc083d768 - 0xc0d98bc8 (5486 kB)
  76. [ 0.000000] Hierarchical RCU implementation.
  77. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
  78. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  79. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  80. [ 0.000000] Total of 96 interrupts on 1 active controller
  81. [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
  82. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  83. [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
  84. [ 0.000000] Console: colour dummy device 80x30
  85. [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  86. [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  87. [ 0.000000] ... MAX_LOCK_DEPTH: 48
  88. [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  89. [ 0.000000] ... CLASSHASH_SIZE: 4096
  90. [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  91. [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  92. [ 0.000000] ... CHAINHASH_SIZE: 16384
  93. [ 0.000000] memory used by lock dependency info: 3695 kB
  94. [ 0.000000] per task-struct memory footprint: 1152 bytes
  95. [ 0.001159] Calibrating delay loop... 317.03 BogoMIPS (lpj=1585152)
  96. [ 0.111083] pid_max: default: 32768 minimum: 301
  97. [ 0.111663] Security Framework initialized
  98. [ 0.111877] Mount-cache hash table entries: 512
  99. [ 0.116485] CPU: Testing write buffer coherency: ok
  100. [ 0.118225] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  101. [ 0.118316] Setting up static identity map for 0xc0518550 - 0xc05185c0
  102. [ 0.124969] Brought up 1 CPUs
  103. [ 0.124999] SMP: Total of 1 processors activated (317.03 BogoMIPS).
  104. [ 0.125030] CPU: All CPU(s) started in SVC mode.
  105. [ 0.129302] devtmpfs: initialized
  106. [ 0.192413] pinctrl core: initialized pinctrl subsystem
  107. [ 0.199829] regulator-dummy: no parameters
  108. [ 0.204101] NET: Registered protocol family 16
  109. [ 0.214447] DMA: preallocated 256 KiB pool for atomic coherent allocations
  110. [ 0.216857] omap-gpmc omap-gpmc: GPMC revision 5.0
  111. [ 0.230377] OMAP GPIO hardware version 2.5
  112. [ 0.251983] omap_mux_init: Add partition: #1: core, flags: 4
  113. [ 0.254882] OMAP3 Beagle Rev: C1/C2/C3
  114. [ 0.280853] Reprogramming SDRC clock to 332000000 Hz
  115. [ 0.284118] hw-breakpoint: debug architecture 0x4 unsupported.
  116. [ 0.302978] omap-mcbsp.2: alias fck already exists
  117. [ 0.303924] omap-mcbsp.3: alias fck already exists
  118. [ 0.308410] OMAP DMA hardware revision 4.0
  119. [ 0.309814] Serial: AMBA PL011 UART driver
  120. [ 0.314361] arm-pmu: alias fck already exists
  121. [ 0.396148] bio: create slab <bio-0> at 0
  122. [ 0.500823] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
  123. [ 0.510437] SCSI subsystem initialized
  124. [ 0.514190] usbcore: registered new interface driver usbfs
  125. [ 0.514831] usbcore: registered new interface driver hub
  126. [ 0.515808] usbcore: registered new device driver usb
  127. [ 0.534576] twl 1-0048: PIH (irq 23) chaining IRQs 338..346
  128. [ 0.535461] twl 1-0048: power (irq 343) chaining IRQs 346..353
  129. [ 0.539367] twl4030_gpio twl4030_gpio: gpio (irq 338) chaining IRQs 354..371
  130. [ 0.549774] vdd_mpu_iva: 600 <--> 1450 mV normal
  131. [ 0.552520] vdd_core: 600 <--> 1450 mV normal
  132. [ 0.555480] VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
  133. [ 0.558532] VDAC: 1800 mV normal standby
  134. [ 0.561309] VDVI: 1800 mV normal standby
  135. [ 0.564239] VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
  136. [ 0.565338] omap_i2c omap_i2c.1: bus 1 rev3.3 at 2600 kHz
  137. [ 0.568603] omap_i2c omap_i2c.3: bus 3 rev3.3 at 100 kHz
  138. [ 0.578643] Switching to clocksource 32k_counter
  139. [ 0.746948] NET: Registered protocol family 2
  140. [ 0.749633] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  141. [ 0.749908] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
  142. [ 0.751037] TCP: Hash tables configured (established 2048 bind 2048)
  143. [ 0.751373] TCP: reno registered
  144. [ 0.751403] UDP hash table entries: 256 (order: 2, 20480 bytes)
  145. [ 0.751739] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
  146. [ 0.753082] NET: Registered protocol family 1
  147. [ 0.755523] RPC: Registered named UNIX socket transport module.
  148. [ 0.755554] RPC: Registered udp transport module.
  149. [ 0.755584] RPC: Registered tcp transport module.
  150. [ 0.755584] RPC: Registered tcp NFSv4.1 backchannel transport module.
  151. [ 0.756988] NetWinder Floating Point Emulator V0.97 (double precision)
  152. [ 0.757446] CPU PMU: probing PMU on CPU 0
  153. [ 0.757476] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  154. [ 0.963317] VFS: Disk quotas dquot_6.5.2
  155. [ 0.963684] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  156. [ 0.967132] NFS: Registering the id_resolver key type
  157. [ 0.967773] Key type id_resolver registered
  158. [ 0.967803] Key type id_legacy registered
  159. [ 0.967987] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  160. [ 0.968719] msgmni has been set to 478
  161. [ 0.973358] io scheduler noop registered
  162. [ 0.973388] io scheduler deadline registered
  163. [ 0.973510] io scheduler cfq registered (default)
  164. [ 0.978942] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  165. [ 0.988739] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 88) is a OMAP UART0
  166. [ 0.992034] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 89) is a OMAP UART1
  167. [ 0.994140] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 90) is a OMAP UART2
  168. [ 1.691009] console [ttyO2] enabled
  169. [ 1.739562] brd: module loaded
  170. [ 1.767700] loop: module loaded
  171. [ 1.780731] mtdoops: mtd device (mtddev=name/number) must be supplied
  172. [ 1.788482] Trying ONFI probe in 16 bits mode, aborting !
  173. [ 1.794342] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit), 256MiB, page size: 2048, OOB size: 64
  174. [ 1.807067] Creating 5 MTD partitions on "omap2-nand.0":
  175. [ 1.812744] 0x000000000000-0x000000080000 : "X-Loader"
  176. [ 1.826660] 0x000000080000-0x000000260000 : "U-Boot"
  177. [ 1.838928] 0x000000260000-0x000000280000 : "U-Boot Env"
  178. [ 1.850738] 0x000000280000-0x000000680000 : "Kernel"
  179. [ 1.863983] 0x000000680000-0x000010000000 : "File System"
  180. [ 2.055145] OneNAND driver initializing
  181. [ 2.073852] usbcore: registered new interface driver asix
  182. [ 2.080261] usbcore: registered new interface driver ax88179_178a
  183. [ 2.087280] usbcore: registered new interface driver cdc_ether
  184. [ 2.094146] usbcore: registered new interface driver smsc95xx
  185. [ 2.100830] usbcore: registered new interface driver net1080
  186. [ 2.107360] usbcore: registered new interface driver cdc_subset
  187. [ 2.114227] usbcore: registered new interface driver zaurus
  188. [ 2.120788] usbcore: registered new interface driver cdc_ncm
  189. [ 2.129608] usbcore: registered new interface driver cdc_wdm
  190. [ 2.135559] Initializing USB Mass Storage driver...
  191. [ 2.141448] usbcore: registered new interface driver usb-storage
  192. [ 2.147766] USB Mass Storage support registered.
  193. [ 2.153350] usbcore: registered new interface driver usbtest
  194. [ 2.162017] mousedev: PS/2 mouse device common for all mice
  195. [ 2.174133] input: twl4030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/1-004b/twl4030_pwrbutton/input/input0
  196. [ 2.192443] twl_rtc twl_rtc: Power up reset detected.
  197. [ 2.198699] twl_rtc twl_rtc: Enabling TWL-RTC
  198. [ 2.208740] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  199. [ 2.216979] i2c /dev entries driver
  200. [ 2.225067] Driver for 1-wire Dallas network protocol.
  201. [ 2.236236] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  202. [ 2.254699] omap-dma-engine omap-dma-engine: allocating channel for 62
  203. [ 2.261901] omap-dma-engine omap-dma-engine: allocating channel for 61
  204. [ 2.651550] ledtrig-cpu: registered to indicate activity on CPUs
  205. [ 2.663055] usbcore: registered new interface driver usbhid
  206. [ 2.668945] usbhid: USB HID core driver
  207. [ 2.675170] oprofile: using arm/armv7
  208. [ 2.680389] TCP: cubic registered
  209. [ 2.683868] Initializing XFRM netlink socket
  210. [ 2.688568] NET: Registered protocol family 17
  211. [ 2.693450] NET: Registered protocol family 15
  212. [ 2.698669] Key type dns_resolver registered
  213. [ 2.703369] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
  214. [ 2.723358] PM: no software I/O chain control; some wakeups may be lost
  215. [ 2.731018] ThumbEE CPU extension supported.
  216. [ 2.741424] VDVI: incomplete constraints, leaving on
  217. [ 2.746948] VDAC: incomplete constraints, leaving on
  218. [ 2.760070] input: gpio-keys as /devices/platform/gpio-keys/input/input1
  219. [ 2.771759] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  220. [ 2.786163] Waiting for root device /dev/mmcblk0p2...
  221. [ 2.795104] mmc0: new high speed SDHC card at address 1234
  222. [ 2.804656] mmcblk0: mmc0:1234 SA04G 3.63 GiB
  223. [ 2.817291] mmcblk0: p1 p2
  224. [ 4.442260] EXT4-fs (mmcblk0p2): recovery complete
  225. [ 4.453033] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  226. [ 4.461822] VFS: Mounted root (ext4 filesystem) on device 179:2.
  227. [ 4.482940] devtmpfs: mounted
  228. [ 4.487121] Freeing init memory: 348K
  229. Mounting proc : OK
  230. Mounting sysfs : OK
  231. Mounting devtmpfs:mount: mounting none on /dev failed: Device or resource busy
  232. boot mounted: OK
  233. /dev/ttyO2 linked to /dev/tty-bd - using as console
  234.  
  235. ******************************************
  236. Starting System Init for OMAP3BeagleBoard
  237. Release: X.x
  238. Kernel: Linux OMAP3BeagleBoard 3.9.0-rc3-00048-g80a4a57 #5 SMP Tue Mar 19 11:32:55 CDT 2013 armv7l GNU/Linux
  239. ******************************************
  240. Saving kernel ring buffer : OK
  241. Mounting devpts : OK
  242. Setting up networking
  243. Configuring lo : OK
  244. Starting syslogd : OK
  245. Starting klogd : OK
  246. Mounting filesystems : OK
  247. mount: mounting none on /proc/bus/usb/ failed: No such file or directory
  248.  
  249. Please press Enter to activate this console.
  250.  
  251. / #
  252. / #
  253. / #
  254. / # cd /sys/devices/system/cpu/cpu0/cpufreq/
  255. /sys/devices/system/cpu/cpu0/cpufreq # cat scaling_driver
  256. omap
  257. /sys/devices/system/cpu/cpu0/cpufreq # cd /
  258. / #
  259. / # ./test.sh
  260. killall: memtester: no process killed
  261. 125000 250000 500000 550000 600000 is the available freqs
  262. bogomips@ boot:
  263. BogoMIPS : 317.03
  264. Boot scaling frequency =600000
  265. TESTING for 1 seconds at 125000
  266. current scaling frequency(for 125000) =125000
  267. bogomips@ frequency 125000:
  268. BogoMIPS : 66.04
  269. TESTING for 1 seconds at 250000
  270. current scaling frequency(for 250000) =250000
  271. bogomips@ frequency 250000:
  272. BogoMIPS : 132.09
  273. TESTING for 1 seconds at 500000
  274. current scaling frequency(for 500000) =500000
  275. bogomips@ frequency 500000:
  276. BogoMIPS : 264.19
  277. TESTING for 1 seconds at 550000
  278. current scaling frequency(for 550000) =550000
  279. bogomips@ frequency 550000:
  280. BogoMIPS : 290.61
  281. TESTING for 1 seconds at 600000
  282. current scaling frequency(for 600000) =600000
  283. bogomips@ frequency 600000:
  284. BogoMIPS : 317.03
  285. More transitions TEST
  286. [0] 1000: 6 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:13 CST 1999
  287. [1] 1000: 6 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:13 CST 1999
  288. [2] 1000: 6 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:13 CST 1999
  289. [3] 1000: 6 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:13 CST 1999
  290. [4] 1000: 6 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:13 CST 1999
  291. [5] 1000: 6 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:13 CST 1999
  292. [6] 1000: 7 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:14 CST 1999
  293. [7] 1000: 7 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:14 CST 1999
  294. [8] 1000: 7 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:14 CST 1999
  295. [9] 1000: 7 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:14 CST 1999
  296. [10] 1000: 7 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:14 CST 1999
  297. [11] 1000: 7 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:14 CST 1999
  298. [12] 1000: 7 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:14 CST 1999
  299. [13] 1000: 7 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:14 CST 1999
  300. [14] 1000: 8 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:15 CST 1999
  301. [15] 1000: 8 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:15 CST 1999
  302. [16] 1000: 8 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:15 CST 1999
  303. [17] 1000: 8 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:15 CST 1999
  304. [18] 1000: 8 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:15 CST 1999
  305. [19] 1000: 8 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:15 CST 1999
  306. [20] 1000: 8 Seconds: Fri Dec 31 18:00:07 CST 1999 : time now = Fri Dec 31 18:00:15 CST 1999
  307. [...]
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!