Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 06:44:11 UTC 2010
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
 BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
 BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
 BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3ffb0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FFC0000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 000000000009fc00 (usable)
 modified: 000000000009fc00 - 00000000000a0000 (reserved)
 modified: 00000000000e8000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 000000003ffb0000 (usable)
 modified: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
 modified: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
 modified: 000000003fff0000 - 0000000040000000 (reserved)
 modified: 00000000ff7c0000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
found SMP MP-table at [c00ff780] ff780
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 15000-1a000
RAMDISK: 3fdfa000 - 3ffa0000
Allocated new RAMDISK: 00100000 - 002a5c48
Move RAMDISK from 000000003fdfa000 - 000000003ff9fc47 to 00100000 - 002a5c47
ACPI: RSDP 000f9870 00014 (v00 ACPIAM)
ACPI: RSDT 3ffb0000 00030 (v01 A M I  OEMRSDT  03000620 MSFT 00000097)
ACPI: FACP 3ffb0200 00081 (v01 A M I  OEMFACP  03000620 MSFT 00000097)
ACPI: DSDT 3ffb03f0 03F3A (v01  K8CBZ K8CBZ262 00000262 INTL 02002026)
ACPI: FACS 3ffc0000 00040
ACPI: APIC 3ffb0390 0005C (v01 A M I  OEMAPIC  03000620 MSFT 00000097)
ACPI: OEMB 3ffc0040 00040 (v01 A M I  AMI_OEM  03000620 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
135MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0003ffb0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0003ffb0
On node 0 totalpages: 261951
free_area_init_node: node 0, pgdat c142d5c0, node_mem_map c1598200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 272 pages used for memmap
  HighMem zone: 34466 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [16000 - 167ff]
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bf7c0000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @c2000000 s31488 r0 d21760 u2097152
pcpu-alloc: s31488 r0 d21760 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259903
Kernel command line: root=/dev/disk/by-uuid/653f19b4-d324-46ab-a178-1e981fd01029 ro vga=773
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 5240960 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Subtract (46 early reservations)
  #1 [0000001000 - 0000002000]   EX TRAMPOLINE
  #2 [0001000000 - 000158fe8c]   TEXT DATA BSS
  #3 [0001590000 - 00015960a1]             BRK
  #4 [00000ff790 - 0000100000]   BIOS reserved
  #5 [00000ff780 - 00000ff790]    MP-table mpf
  #6 [000009fc00 - 00000fd150]   BIOS reserved
  #7 [00000fd268 - 00000ff780]   BIOS reserved
  #8 [00000fd150 - 00000fd268]    MP-table mpc
  #9 [0000010000 - 0000011000]      TRAMPOLINE
  #10 [0000011000 - 0000015000]     ACPI WAKEUP
  #11 [0000015000 - 0000016000]         PGTABLE
  #12 [0000100000 - 00002a6000]     NEW RAMDISK
  #13 [0001597000 - 0001598000]         BOOTMEM
  #14 [0001598000 - 0001d98000]         BOOTMEM
  #15 [000158fec0 - 000158fec4]         BOOTMEM
  #16 [000158ff00 - 000158ffc0]         BOOTMEM
  #17 [00015960c0 - 0001596114]         BOOTMEM
  #18 [0001d98000 - 0001d9b000]         BOOTMEM
  #19 [000158ffc0 - 000158ffd0]         BOOTMEM
  #20 [0001596140 - 0001596d40]         BOOTMEM
  #21 [0001596d40 - 0001596d67]         BOOTMEM
  #22 [0001596d80 - 0001596e7c]         BOOTMEM
  #23 [0001596e80 - 0001596ec0]         BOOTMEM
  #24 [0001596ec0 - 0001596f00]         BOOTMEM
  #25 [0001596f00 - 0001596f40]         BOOTMEM
  #26 [0001596f40 - 0001596f80]         BOOTMEM
  #27 [0001596f80 - 0001596fc0]         BOOTMEM
  #28 [0001596fc0 - 0001597000]         BOOTMEM
  #29 [0001d9b000 - 0001d9b040]         BOOTMEM
  #30 [0001d9b040 - 0001d9b080]         BOOTMEM
  #31 [0001d9b080 - 0001d9b090]         BOOTMEM
  #32 [0001d9b0c0 - 0001d9b107]         BOOTMEM
  #33 [0001d9b140 - 0001d9b187]         BOOTMEM
  #34 [0002000000 - 000200d000]         BOOTMEM
  #35 [0002200000 - 000220d000]         BOOTMEM
  #36 [0001d9d1c0 - 0001d9d1c4]         BOOTMEM
  #37 [0001d9d200 - 0001d9d204]         BOOTMEM
  #38 [0001d9d240 - 0001d9d248]         BOOTMEM
  #39 [0001d9d280 - 0001d9d288]         BOOTMEM
  #40 [0001d9d2c0 - 0001d9d368]         BOOTMEM
  #41 [0001d9d380 - 0001d9d3e8]         BOOTMEM
  #42 [0001d9d400 - 0001da1400]         BOOTMEM
  #43 [0001da1400 - 0001e21400]         BOOTMEM
  #44 [0001e21400 - 0001e61400]         BOOTMEM
  #45 [000220d000 - 000270c880]         BOOTMEM
Initializing HighMem for node 0 (000377fe:0003ffb0)
Memory: 1026144k/1048256k available (3102k kernel code, 21660k reserved, 1207k data, 428k init, 138952k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc1436000 - 0xc14a1000   ( 428 kB)
      .data : 0xc1307a56 - 0xc14357e0   (1207 kB)
      .text : 0xc1000000 - 0xc1307a56   (3102 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:512
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2199.819 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4401.95 BogoMIPS (lpj=7332730)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
mce: CPU supports 5 MCE banks
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
SMP alternatives: switching to UP code
ACPI: Core revision 20100702
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 00
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 1 CPUs
Total of 1 processors activated (4401.95 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, ffffffff]
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io  0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0x40000000-0xffffffff]
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff] (ignored)
pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
pci 0000:00:03.1: quirk: [io  0x0800-0x083f] claimed by ali7101 ACPI
pci 0000:00:04.0: reg 10: [io  0xe800-0xe8ff]
pci 0000:00:04.0: reg 14: [mem 0xfebff000-0xfebfffff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:0d.0: reg 10: [io  0xe400-0xe4ff]
pci 0000:00:0d.0: reg 14: [mem 0xfebfec00-0xfebfecff]
pci 0000:00:0d.0: PME# supported from D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: reg 10: [io  0x01f0-0x01ff]
pci 0000:00:0e.0: reg 14: [io  0x03f4-0x03f7]
pci 0000:00:0e.0: reg 18: [io  0x0170-0x017f]
pci 0000:00:0e.0: reg 1c: [io  0x0374-0x0377]
pci 0000:00:0e.0: reg 20: [io  0xff00-0xff0f]
pci 0000:00:0f.0: reg 10: [mem 0xfebfd000-0xfebfdfff]
pci 0000:00:0f.1: reg 10: [mem 0xfebfc000-0xfebfcfff]
pci 0000:00:0f.2: reg 10: [mem 0xfebfb000-0xfebfbfff]
pci 0000:00:0f.3: reg 10: [mem 0xfebfe800-0xfebfe8ff]
pci 0000:00:0f.3: PME# supported from D0 D3hot D3cold
pci 0000:00:0f.3: PME# disabled
PCI: peer root bus 00 res updated from pci conf
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff pref]
pci 0000:01:00.0: reg 18: [mem 0xfc000000-0xfcffffff]
pci 0000:01:00.0: reg 30: [mem 0xfeae0000-0xfeafffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:01.0:   bridge window [mem 0xfaa00000-0xfeafffff]
pci 0000:00:01.0:   bridge window [mem 0xba900000-0xda8fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02-02] (subtractive decode)
pci 0000:00:02.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:02.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:02.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:02.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:02.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:02.0:   bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15), disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKP] (IRQs 3 *4 5 6 7 10 11 12 14 15)
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000003ffb0000 - 000000003fffffff
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: [io  0x0400-0x040f] has been reserved
system 00:05: [io  0x0480-0x048f] has been reserved
system 00:05: [io  0x04d0-0x04d1] has been reserved
system 00:05: [io  0x0800-0x087f] could not be reserved
system 00:05: [mem 0xfff80000-0xffffffff] has been reserved
system 00:06: [mem 0xffbc0000-0xffbfffff] has been reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: [io  0x0680-0x06ff] has been reserved
system 00:07: [io  0x0295-0x0296] has been reserved
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0x3fffffff] could not be reserved
Switching to clocksource acpi_pm
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem 0xfaa00000-0xfeafffff]
pci 0000:00:01.0:   bridge window [mem 0xba900000-0xda8fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0:   bridge window [io  disabled]
pci 0000:00:02.0:   bridge window [mem disabled]
pci 0000:00:02.0:   bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 6 [mem 0x40000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xfaa00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xba900000-0xda8fffff pref]
pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 6 [mem 0x40000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
PCI: CLS mismatch (64 != 32), using 64 bytes
pci 0000:01:00.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 1688k freed
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1291544597.153:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1736
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 1536k, total 262144k
vesafb: mode is 1024x768x8, linelength=1024, pages=3
vesafb: protected mode interface info at c000:c2c0
vesafb: pmi: set display start = c00cc2f6, set palette = c00cc360
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2010-12-05 10:23:17 UTC (1291544597)
Initalizing network drop monitor service
Freeing unused kernel memory: 428k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
udev[33]: starting version 164
SCSI subsystem initialized
libata version 3.00 loaded.
pata_ali 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
scsi0 : pata_ali
scsi1 : pata_ali
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
ata1.00: ATAPI: PHILIPS DVDR1660P1, P1.3, max UDMA/33
ata1.00: WARNING: ATAPI DMA disabled for reliability issues.  It can be enabled
ata1.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM            PHILIPS  DVDR1660P1       P1.3 PQ: 0 ANSI: 5
ata2.00: ATA-6: WDC WD800BB-00JHA0, 05.01C05, max UDMA/100
ata2.00: 156301488 sectors, multi 16: LBA
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access     ATA      WDC WD800BB-00JH 05.0 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sd 1:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Attached SCSI disk
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem sda3
Starting XFS recovery on filesystem: sda3 (logdev: internal)
Ending XFS recovery on filesystem: sda3 (logdev: internal)
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[554]: starting version 164
fuse init (API version 7.15)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
ACPI: acpi_idle registered with cpuidle
input: PC Speaker as /devices/platform/pcspkr/input/input1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
uli526x 0000:00:0d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
net eth0: ULi M5263 at pci0000:00:0d.0, 00:0b:6a:b0:0c:ed, irq 17
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux agpgart interface v0.103
ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS?
ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:0f.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:0f.3: EHCI Host Controller
ehci_hcd 0000:00:0f.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0f.3: debug port 1
ehci_hcd 0000:00:0f.3: irq 23, io mem 0xfebfe800
ehci_hcd 0000:00:0f.3: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
agpgart-ali 0000:00:00.0: unsupported ALi chipset [10b9/1689])
agpgart-amd64 0000:00:00.0: AGP bridge [10b9/1689]
agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
agpgart-amd64 0000:00:00.0: setting up ULi AGP
agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:0f.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:0f.0: OHCI Host Controller
ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0f.0: irq 20, io mem 0xfebfd000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ali1563_smbus 0000:00:03.0: Found ALi1563 SMBus at 0x0400
ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted.
ohci_hcd 0000:00:0f.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:0f.1: OHCI Host Controller
ohci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:0f.1: irq 21, io mem 0xfebfc000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:0f.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:0f.2: OHCI Host Controller
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:0f.2: irq 22, io mem 0xfebfb000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
Intel ICH 0000:00:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
alim7101_wdt: Steve Hill <[email protected]>.
alim7101_wdt: ALi 1543 South-Bridge not present - WDT not set
usb 3-3: new low speed USB device using ohci_hcd and address 2
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0f.1/usb3/3-3/3-3:1.0/input/input4
generic-usb 0003:046D:C521.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:0f.1-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0f.1/usb3/3-3/3-3:1.1/input/input5
generic-usb 0003:046D:C521.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:0f.1-3/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
AC'97 1 does not respond - RESET
AC'97 1 access is not valid [0xffffffff], removing mixer.
Unable to initialize codec #1
intel8x0_measure_ac97_clock: measured 52236 usecs (2520 samples)
intel8x0: clocking to 48000
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module  260.19.21  Thu Nov  4 20:24:24 PDT 2010
XFS mounting filesystem sda4
Starting XFS recovery on filesystem: sda4 (logdev: internal)
Ending XFS recovery on filesystem: sda4 (logdev: internal)
Adding 2104508k swap on /dev/sda2.  Priority:-1 extents:1 across:2104508k
sshd (1166): /proc/1166/oom_adj is deprecated, please use /proc/1166/oom_score_adj instead.
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present