boom

Terminal ready

U-Boot SPL 2013.01.01-00001-gf93c77c (Mar 14 2013 - 09:07:46)
OMAP4430 ES2.2
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img


U-Boot 2013.01.01-00001-gf93c77c (Mar 14 2013 - 09:07:46)

CPU  : OMAP4430 ES2.2
Board: OMAP4 Panda
I2C:   ready
DRAM:  1 GiB
MMC:   OMAP SD/MMC: 0
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0
mmc0 is current device
SD/MMC found on device 0
reading boot.scr
** Unable to read file boot.scr **
reading uEnv.txt
469 bytes read in 2 ms (228.5 KiB/s)
Importing environment from mmc0 ...
Running uenvcmd ...
baudrate=115200
bootargs=console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait earlyprintk
bootcmd=printenv;echo "NOTE: booting from MMC filesystem";sleep 1;run fatloaduimage; sleep 1; run loaddtb; echo "starting.."; sleep 1; run bootwdtb
bootdelay=3
bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr}
bootwdtb=bootm ${loadaddr} - ${fdtbaddr}
console=ttyO2,115200n8
fatloaduimage=fatload mmc 0:1 ${loadaddr} uImage
fdt_high=0xffffffff
fdtbaddr=0x80F80000
filesize=0x1d5
importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize}
loadaddr=0x80200000
loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt
loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr
loaddtb=fatload mmc 0:1 ${fdtbaddr} omap4-panda.dtb; fdt addr ${fdtbaddr}; fdt resize
loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage
mmcargs=setenv bootargs console=${console} vram=${vram} root=${mmcroot} rootfstype=${mmcrootfstype}
mmcboot=echo Booting from mmc${mmcdev} ...; run mmcargs; bootm ${loadaddr}
mmcdev=0
mmcroot=/dev/mmcblk0p2 rw
mmcrootfstype=ext3 rootwait
uenvcmd=boot
usbtty=cdc_acm
vram=16M

Environment size: 1212/131068 bytes
NOTE: booting from MMC filesystem
reading uImage
3997672 bytes read in 184 ms (20.7 MiB/s)
reading omap4-panda.dtb
16506 bytes read in 11 ms (1.4 MiB/s)
starting..
## Booting kernel from Legacy Image at 80200000 ...
   Image Name:   Linux-3.9.0-rc3-00061-g7738be1
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3997608 Bytes = 3.8 MiB
   Load Address: 80800000
   Entry Point:  80800000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   Loading Kernel Image ... OK
OK
   reserving fdt memory region: addr=9d000000 size=3000000
   reserving fdt memory region: addr=80f80000 size=5000
   Using Device Tree in place at 80f80000, end 80f87fff

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0

[    0.000000] Linux version 3.9.0-rc3-00061-g7738be1 (nmenon@kahuna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #11 SMP Thu Apr 4 13:46:58 CDT 2013

[    0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c53c7d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

[    0.000000] Machine: Generic OMAP4 (Flattened Device Tree), model: TI OMAP4 PandaBoard

[    0.000000] bootconsole [earlycon0] enabled

[    0.000000] cma: CMA: reserved 16 MiB at ae800000

[    0.000000] Memory policy: ECC disabled, Data cache writealloc

[    0.000000] OMAP4430 ES2.2

[    0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000054

[    0.000000] pgd = c0004000

[    0.000000] [00000054] *pgd=00000000

[    0.000000] Internal error: Oops: 5 [#1] SMP ARM

[    0.000000] Modules linked in:

[    0.000000] CPU: 0    Not tainted  (3.9.0-rc3-00061-g7738be1 #11)

[    0.000000] PC is at kmem_cache_alloc_trace+0x4c/0x190

[    0.000000] LR is at kmem_cache_alloc_trace+0x38/0x190

[    0.000000] pc : [<c0102818>]    lr : [<c0102804>]    psr: 600001d3

[    0.000000] sp : c075df20  ip : 00000006  fp : c1797080

[    0.000000] r10: 00000014  r9 : 600001d3  r8 : c042281c

[    0.000000] r7 : 00008000  r6 : 000080d0  r5 : c07f7924  r4 : 00000000

[    0.000000] r3 : 00000000  r2 : c075df20  r1 : 00000001  r0 : c0102804

[    0.000000] Flags: nZCv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment kernel

[    0.000000] Control: 10c53c7d  Table: 8000404a  DAC: 00000017

[    0.000000] Process swapper (pid: 0, stack limit = 0xc075c240)

[    0.000000] Stack: (0xc075df20 to 0xc075e000)

[    0.000000] df20: c07ec984 c064376c 600001d3 c0422878 c07f7924 c1797bf0 c0769330 c0769330

[    0.000000] df40: 80000200 c06378c0 c1797080 c042281c c0783cd8 c0783cd8 00000040 c0769330

[    0.000000] df60: c0769330 c0716054 00000000 c0716130 c07387cc 2f800000 c07c30c0 c0708f80

[    0.000000] df80: c075df90 c075df98 bfffffff c075dfdc 00000000 00000000 00000000 00000000

[    0.000000] dfa0: c0635dec ffffffff 00000001 00000000 bfffffff 8000406a 411fc092 00000000

[    0.000000] dfc0: 00000000 c0705584 00000000 00000000 00000000 00000000 00000000 c073a518

[    0.000000] dfe0: 00000000 10c53c7d c076490c c073a514 c076912c 80008074 00000000 00000000

[    0.000000] [<c0102818>] (kmem_cache_alloc_trace+0x4c/0x190) from [<c042281c>] (of_clk_add_provider+0x24/0x80)

[    0.000000] [<c042281c>] (of_clk_add_provider+0x24/0x80) from [<c0716054>] (omap4_clk_init_dt+0x3c/0x54)

[    0.000000] [<c0716054>] (omap4_clk_init_dt+0x3c/0x54) from [<c0716130>] (omap4xxx_clk_init+0xc4/0x130)

[    0.000000] [<c0716130>] (omap4xxx_clk_init+0xc4/0x130) from [<c0708f80>] (setup_arch+0x6c4/0x7a0)

[    0.000000] [<c0708f80>] (setup_arch+0x6c4/0x7a0) from [<c0705584>] (start_kernel+0x88/0x300)

[    0.000000] [<c0705584>] (start_kernel+0x88/0x300) from [<80008074>] (0x80008074)

[    0.000000] Code: e3c23d7f e3c3303f e5933014 e0843103 (e5931054)

[    0.000000] ---[ end trace 1b75b31a2719ed1c ]---

[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!


Skipping tty reset...
Thanks for using picocom
picocom v1.4

port is        : /dev/ttyUSB0
flowcontrol    : none
baudrate is    : 115200
parity is      : none
databits are   : 8
escape is      : C-a
noinit is      : yes
noreset is     : yes
nolock is      : yes
send_cmd is    : ascii_xfr -s -v -l10
receive_cmd is : rz -vv