[    0.782865] hub 3-0:1.0: USB hub found
[    0.782876] hub 3-0:1.0: 10 ports detected
[    0.784450] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.784453] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.784475] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.784476] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.784477] usb usb4: Product: xHCI Host Controller
[    0.784478] usb usb4: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.784479] usb usb4: SerialNumber: 0000:00:14.0
[    0.784615] hub 4-0:1.0: USB hub found
[    0.784621] hub 4-0:1.0: 2 ports detected
[    0.790315] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[    0.790317] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[    0.790851] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.790855] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.791078] mousedev: PS/2 mouse device common for all mice
[    0.791410] rtc_cmos 00:06: RTC can wake from S4
[    0.791526] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.791552] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.791593] device-mapper: uevent: version 1.0.3
[    0.791651] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.791655] ledtrig-cpu: registered to indicate activity on CPUs
[    0.791715] TCP: cubic registered
[    0.791769] NET: Registered protocol family 10
[    0.791873] NET: Registered protocol family 17
[    0.791878] Key type dns_resolver registered
[    0.792059] Loading compiled-in X.509 certificates
[    0.792629] Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
[    0.792636] registered taskstats version 1
[    0.794018] Key type trusted registered
[    0.795271] Key type encrypted registered
[    0.796417] AppArmor: AppArmor sha1 policy hashing enabled
[    0.796418] IMA: No TPM chip found, activating TPM-bypass!
[    0.796634] regulator-dummy: disabling
[    0.796687]   Magic number: 15:679:318
[    0.796706] tty tty43: hash matches
[    0.796776] rtc_cmos 00:06: setting system clock to 2015-05-09 07:18:17 UTC (1431155897)
[    0.797265] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.797266] EDD information not available.
[    0.797290] PM: Hibernation image not present or could not be loaded.
[    0.797829] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    0.797830] Write protecting the kernel read-only data: 12288k
[    0.799208] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
[    0.800291] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    0.808487] systemd-udevd[115]: starting version 204
[    0.816675] wmi: Mapper loaded
[    0.821871] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.821886] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.822090] ahci 0000:00:1f.2: version 3.0
[    0.822111] r8169 0000:02:00.0: irq 45 for MSI/MSI-X
[    0.822210] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[    0.822241] r8169 0000:02:00.0 eth0: RTL8168e/8111e at 0xffffc90000656000, 74:27:ea:f7:2b:52, XID 0c200000 IRQ 45
[    0.822243] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.822245] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode
[    0.822247] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems
[    0.822605] [drm] Initialized drm 1.1.0 20060810
[    0.830611] scsi0 : ahci
[    0.831032] scsi1 : ahci
[    0.831540] scsi2 : ahci
[    0.831589] scsi3 : ahci
[    0.831640] scsi4 : ahci
[    0.831670] ata1: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a100 irq 46
[    0.831671] ata2: DUMMY
[    0.831672] ata3: DUMMY
[    0.831673] ata4: DUMMY
[    0.831675] ata5: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a300 irq 46
[    0.837183] [drm] Memory usable by graphics device = 2048M
[    0.837186] checking generic (e0000000 500000) vs hw (e0000000 10000000)
[    0.837187] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    0.837200] Console: switching to colour dummy device 80x25
[    0.878236] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[    0.878245] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.878246] [drm] Driver supports precise vblank timestamp query.
[    0.878301] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.932244] fbcon: inteldrmfb (fb0) is primary device
[    1.078170] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.106168] Console: switching to colour frame buffer device 160x64
[    1.108484] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.108485] i915 0000:00:02.0: registered panic notifier
[    1.111006] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.111314] acpi device:55: registered as cooling_device9
[    1.111355] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    1.111477] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.150143] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.151447] ata1.00: ATA-8: WDC WD5000AAKX-22ERMA0, 17.01H17, max UDMA/133
[    1.151450] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.152958] ata1.00: configured for UDMA/133
[    1.153091] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-2 17.0 PQ: 0 ANSI: 5
[    1.153201] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.153222] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.153263] sd 0:0:0:0: [sda] Write Protect is off
[    1.153265] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.153284] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.154105] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.170940] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.170943] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.170945] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.186433] ata5.00: ATAPI: MATSHITA DVD-RAM SW830, 1.00, max UDMA/100
[    1.193019]  sda: sda1 sda2 < sda5 >
[    1.193597] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.205068] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.205072] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.205074] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.210456] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.210458] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.210695] hub 1-1:1.0: USB hub found
[    1.210828] hub 1-1:1.0: 4 ports detected
[    1.220233] ata5.00: configured for UDMA/100
[    1.224043] scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM SW830    1.00 PQ: 0 ANSI: 5
[    1.232854] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.232857] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.232977] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.233023] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    1.270942] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    1.322106] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.454411] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.454414] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.454650] hub 2-1:1.0: USB hub found
[    1.454771] hub 2-1:1.0: 6 ports detected
[    1.509978] tsc: Refined TSC clocksource calibration: 3092.836 MHz
[    1.622002] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[    1.681337] usb 3-4: New USB device found, idVendor=145f, idProduct=018d
[    1.681339] usb 3-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.681340] usb 3-4: Product: Trust Webcam
[    1.681341] usb 3-4: Manufacturer: Sonix Technology Co., Ltd.
[    1.755474] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.853952] usb 3-5: new low-speed USB device number 3 using xhci_hcd
[    1.880524] usb 3-5: New USB device found, idVendor=1c4f, idProduct=0002
[    1.880526] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.880528] usb 3-5: Product: USB Keykoard
[    1.880529] usb 3-5: Manufacturer: USB
[    1.880614] usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.880617] usb 3-5: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.059667] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    2.427031] random: init urandom read with 116 bits of entropy available
[    2.509820] Switched to clocksource tsc
[    2.607299] random: nonblocking pool is initialized
[    2.793760] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    9.234711] Adding 4065276k swap on /dev/sda5.  Priority:-1 extents:1 across:4065276k FS
[    9.342372] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.393722] systemd-udevd[424]: starting version 204
[    9.539934] lp: driver loaded but no devices found
[    9.548607] ppdev: user-space parallel port driver
[    9.548879] parport_pc 00:0b: reported by Plug and Play ACPI
[    9.548971] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    9.560516] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[    9.560521] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.560524] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[    9.560526] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[    9.560528] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.560528] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[    9.560530] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[    9.560531] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.560532] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.562993] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
[    9.588329] HDA driver get symbol successfully from i915 module
[    9.588359] snd_hda_intel 0000:00:03.0: irq 49 for MSI/MSI-X
[    9.588461] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[    9.602455] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
[    9.602854] SKU: Nid=0x1d sku_cfg=0x40400001
[    9.602855] SKU: port_connectivity=0x1
[    9.602855] SKU: enable_pcbeep=0x0
[    9.602856] SKU: check_sum=0x00000000
[    9.602857] SKU: customization=0x00000000
[    9.602857] SKU: external_amp=0x0
[    9.602858] SKU: platform_type=0x0
[    9.602858] SKU: swap=0x0
[    9.602859] SKU: override=0x1
[    9.603141] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    9.603142]    speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    9.603143]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    9.603143]    mono: mono_out=0x0
[    9.603144]    inputs:
[    9.603145]      Front Mic=0x19
[    9.603146]      Rear Mic=0x18
[    9.603147]      Line=0x1a
[    9.603148] realtek: No valid SSID, checking pincfg 0x40400001 for NID 0x1d
[    9.603148] realtek: Enabling init ASM_ID=0x0001 CODEC_ID=10ec0662
[    9.611306] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[    9.611347] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    9.611379] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[    9.611407] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[    9.611438] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[    9.615467] device-mapper: multipath: version 1.6.0 loaded
[    9.646360] lp0: using parport0 (interrupt-driven).
[    9.985438] hidraw: raw HID events driver (C) Jiri Kosina
[    9.987656] Linux video capture interface: v2.00
[    9.990583] usbcore: registered new interface driver usbhid
[    9.990585] usbhid: USB HID core driver
[    9.991814] input: USB USB Keykoard as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input12
[    9.991871] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:14.0-5/input0
[    9.991974] input: USB USB Keykoard as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/input/input13
[    9.993482] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:14.0-5/input1
[    9.993530] 2:3:1: cannot get freq at ep 0x84
[   10.010651] usbcore: registered new interface driver snd-usb-audio
[   10.010671] uvcvideo: Found UVC 1.00 device Trust Webcam (145f:018d)
[   10.023142] input: Trust Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input14
[   10.023397] usbcore: registered new interface driver uvcvideo
[   10.023399] USB Video Class driver (1.1.1)
[   14.277302] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   14.507922] init: failsafe main process (841) killed by TERM signal
[   15.664020] Bluetooth: Core ver 2.17
[   15.664031] NET: Registered protocol family 31
[   15.664032] Bluetooth: HCI device and connection manager initialized
[   15.664048] Bluetooth: HCI socket layer initialized
[   15.664049] Bluetooth: L2CAP socket layer initialized
[   15.664061] Bluetooth: SCO socket layer initialized
[   15.665740] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.665742] Bluetooth: BNEP filters: protocol multicast
[   15.665746] Bluetooth: BNEP socket layer initialized
[   16.008167] Bluetooth: RFCOMM TTY layer initialized
[   16.008178] Bluetooth: RFCOMM socket layer initialized
[   16.008181] Bluetooth: RFCOMM ver 1.11
[   16.008745] init: cups main process (953) killed by HUP signal
[   16.008751] init: cups main process ended, respawning
[   17.165630] r8169 0000:02:00.0 eth0: link down
[   17.165657] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.165942] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.325190] init: samba-ad-dc main process (1002) terminated with status 1
[   20.178754] vboxdrv: module verification failed: signature and/or  required key missing - tainting kernel
[   20.180533] vboxdrv: Found 4 processor cores.
[   20.180656] vboxdrv: fAsync=0 offMin=0x224 offMax=0x5542
[   20.181283] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   20.181285] vboxdrv: Successfully loaded version 4.3.26 (interface 0x001a000a).
[   20.386683] vboxpci: IOMMU not found (not registered)
[   20.530810] init: plymouth-upstart-bridge main process ended, respawning
[   20.533498] init: plymouth-upstart-bridge main process (1544) terminated with status 1
[   20.533504] init: plymouth-upstart-bridge main process ended, respawning
[   20.880466] ip_tables: (C) 2000-2006 Netfilter Core Team
[   20.885212] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   21.068129] init: plymouth-stop pre-start process (1617) terminated with status 1
[   21.390031] Bridge firewalling registered
[   21.467337] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   21.485280] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[  108.686248] cgroup: systemd-logind (983) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[  108.686252] cgroup: "memory" requires setting use_hierarchy to 1 on the root.
[  113.918850] 2:3:1: cannot get freq at ep 0x84
[  113.921871] 2:3:1: cannot get freq at ep 0x84
[  114.208584] 2:3:1: cannot get freq at ep 0x84
[  114.211599] 2:3:1: cannot get freq at ep 0x84
[  164.934499] r8169 0000:02:00.0 eth0: link up
[  164.934515] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1652.136744] usb 3-2: new full-speed USB device number 4 using xhci_hcd
[ 1652.137076] usb 3-2: Device not responding to set address.
[ 1652.340901] usb 3-2: Device not responding to set address.
[ 1652.544601] usb 3-2: device not accepting address 4, error -71
[ 1652.656639] usb 3-2: new low-speed USB device number 5 using xhci_hcd
[ 1652.658299] usb 3-2: Device not responding to set address.
[ 1652.860913] usb 3-2: Device not responding to set address.
[ 1653.064423] usb 3-2: device not accepting address 5, error -71
[ 1653.176458] usb 3-2: new low-speed USB device number 6 using xhci_hcd
[ 1653.178145] usb 3-2: Device not responding to set address.
[ 1653.380752] usb 3-2: Device not responding to set address.
[ 1653.584298] usb 3-2: device not accepting address 6, error -71
[ 1653.696295] usb 3-2: new full-speed USB device number 7 using xhci_hcd
[ 1653.696587] usb 3-2: Device not responding to set address.
[ 1653.900547] usb 3-2: Device not responding to set address.
[ 1654.104151] usb 3-2: device not accepting address 7, error -71
[ 1654.104240] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 1706.442388] usb 3-2: new full-speed USB device number 8 using xhci_hcd
[ 1706.442706] usb 3-2: Device not responding to set address.
[ 1706.646537] usb 3-2: Device not responding to set address.
[ 1706.850209] usb 3-2: device not accepting address 8, error -71
[ 1706.962252] usb 3-2: new low-speed USB device number 9 using xhci_hcd
[ 1706.963991] usb 3-2: Device not responding to set address.
[ 1707.166572] usb 3-2: Device not responding to set address.
[ 1707.370072] usb 3-2: device not accepting address 9, error -71
[ 1707.482069] usb 3-2: new full-speed USB device number 10 using xhci_hcd
[ 1707.482314] usb 3-2: Device not responding to set address.
[ 1707.686201] usb 3-2: Device not responding to set address.
[ 1707.889857] usb 3-2: device not accepting address 10, error -71
[ 1708.001974] usb 3-2: new low-speed USB device number 11 using xhci_hcd
[ 1708.003757] usb 3-2: Device not responding to set address.
[ 1708.206343] usb 3-2: Device not responding to set address.
[ 1708.409743] usb 3-2: device not accepting address 11, error -71
[ 1708.409855] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 1885.127038] usb 3-1: new full-speed USB device number 12 using xhci_hcd
[ 1885.127320] usb 3-1: Device not responding to set address.
[ 1885.331189] usb 3-1: Device not responding to set address.
[ 1885.534863] usb 3-1: device not accepting address 12, error -71
[ 1885.646905] usb 3-1: new low-speed USB device number 13 using xhci_hcd
[ 1885.648281] usb 3-1: Device not responding to set address.
[ 1885.852190] usb 3-1: Device not responding to set address.
[ 1886.054725] usb 3-1: device not accepting address 13, error -71
[ 1886.166765] usb 3-1: new low-speed USB device number 14 using xhci_hcd
[ 1886.168142] usb 3-1: Device not responding to set address.
[ 1886.372087] usb 3-1: Device not responding to set address.
[ 1886.574586] usb 3-1: device not accepting address 14, error -71
[ 1886.686629] usb 3-1: new low-speed USB device number 15 using xhci_hcd
[ 1886.688006] usb 3-1: Device not responding to set address.
[ 1886.891950] usb 3-1: Device not responding to set address.
[ 1887.094416] usb 3-1: device not accepting address 15, error -71
[ 1887.094504] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 2029.314174] PM: Syncing filesystems ... done.
[ 2029.487594] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 2029.488694] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
[ 2029.488697] PM: Marking nosave pages: [mem 0xc765d000-0xc7663fff]
[ 2029.488698] PM: Marking nosave pages: [mem 0xc7ebb000-0xc813efff]
[ 2029.488706] PM: Marking nosave pages: [mem 0xd88dd000-0xffffffff]
[ 2029.489223] PM: Basic memory bitmaps created
[ 2029.489600] PM: Preallocating image memory... done (allocated 598146 pages)
[ 2051.118745] PM: Allocated 2392584 kbytes in 21.63 seconds (110.61 MB/s)
[ 2051.118746] Freezing remaining freezable tasks ... (elapsed 0.477 seconds) done.
[ 2051.595872] Suspending console(s) (use no_console_suspend to debug)
[ 2051.596039] i8042 aux 00:0d: System wakeup disabled by ACPI
[ 2051.596199] parport_pc 00:0b: disabled
[ 2051.596336] serial 00:0a: disabled
[ 2051.596466] serial 00:09: disabled
[ 2052.002970] PM: freeze of devices complete after 407.202 msecs
[ 2052.003095] PM: late freeze of devices complete after 0.124 msecs
[ 2052.003395] PM: noirq freeze of devices complete after 0.299 msecs
[ 2052.003620] ACPI: Preparing to enter system sleep state S4
[ 2052.003926] PM: Saving platform NVS memory
[ 2052.009673] Disabling non-boot CPUs ...
[ 2052.009861] Broke affinity for irq 44
[ 2052.009863] Broke affinity for irq 46
[ 2052.010864] kvm: disabling virtualization on CPU1
[ 2052.010891] smpboot: CPU 1 is now offline
[ 2052.011538] Broke affinity for irq 16
[ 2052.012543] kvm: disabling virtualization on CPU2
[ 2052.114604] smpboot: CPU 2 is now offline
[ 2052.114906] Broke affinity for irq 23
[ 2052.114908] Broke affinity for irq 42
[ 2052.115912] kvm: disabling virtualization on CPU3
[ 2052.218576] smpboot: CPU 3 is now offline
[ 2052.218876] PM: Creating hibernation image:
[ 2052.257466] PM: Need to copy 385795 pages
[ 2052.257468] PM: Normal pages needed: 385795 + 1024, available pages: 630940
[ 2052.219614] PM: Restoring platform NVS memory
[ 2052.221826] Enabling non-boot CPUs ...
[ 2052.221853] x86: Booting SMP configuration:
[ 2052.221854] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 2052.233572] kvm: enabling virtualization on CPU1
[ 2052.235770] CPU1 is up
[ 2052.235782] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 2052.247526] kvm: enabling virtualization on CPU2
[ 2052.249801] CPU2 is up
[ 2052.249825] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 2052.261601] kvm: enabling virtualization on CPU3
[ 2052.263848] CPU3 is up
[ 2052.268255] ACPI: Waking up from system sleep state S4
[ 2052.377805] PM: noirq restore of devices complete after 7.882 msecs
[ 2052.377911] PM: early restore of devices complete after 0.081 msecs
[ 2052.423706] usb usb3: root hub lost power or was reset
[ 2052.423708] usb usb4: root hub lost power or was reset
[ 2052.423816] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X
[ 2052.423895] xhci_hcd 0000:00:14.0: irq 48 for MSI/MSI-X
[ 2052.423955] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
[ 2052.423991] usb usb1: root hub lost power or was reset
[ 2052.424109] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 2052.424176] usb usb2: root hub lost power or was reset
[ 2052.427877] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2052.428062] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2052.428474] serial 00:09: activated
[ 2052.429017] serial 00:0a: activated
[ 2052.429688] parport_pc 00:0b: activated
[ 2052.561540] r8169 0000:02:00.0 eth0: link down
[ 2052.697756] ------------[ cut here ]------------
[ 2052.697781] WARNING: CPU: 3 PID: 4029 at /build/buildd/linux-3.13.0/drivers/gpu/drm/i915/intel_ddi.c:784 intel_ddi_pll_mode_set+0x871/0x8b0 [i915]()
[ 2052.697782] SPLL already enabled
[ 2052.697796] Modules linked in: ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle xt_tcpudp bridge stp llc ip6table_filter ip6_tables iptable_filter ip_tables x_tables pci_stub vboxpci(OX) vboxnetadp(OX) vboxnetflt(OX) vboxdrv(OX) rfcomm bnep bluetooth binfmt_misc joydev hid_generic uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core usbhid snd_usb_audio videodev hid snd_usbmidi_lib dm_multipath scsi_dh snd_hda_codec_hdmi snd_hda_codec_realtek x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_intel snd_seq_midi snd_seq_midi_event snd_hda_codec snd_hwdep kvm_intel snd_pcm kvm snd_page_alloc crct10dif_pclmul crc32_pclmul snd_rawmidi ghash_clmulni_intel cryptd snd_seq snd_seq_device snd_timer snd serio_raw mei_me mei lpc_ich soundcore parport_pc ppdev mac_hid lp parport dm_mirror dm_region_hash dm_log i915 i2c_algo_bit psmouse drm_kms_helper ahci drm r8169 libahci mii wmi video
[ 2052.697803] CPU: 3 PID: 4029 Comm: kworker/u8:10 Tainted: G           OX 3.13.0-37-generic #64-Ubuntu
[ 2052.697804] Hardware name: Acer Veriton X2631G/Veriton X2631G, BIOS P11-A3L                 12/10/2013
[ 2052.697807] Workqueue: events_unbound async_run_entry_fn
[ 2052.697808]  0000000000000009 ffff880067ea79f0 ffffffff8171ed09 ffff880067ea7a38
[ 2052.697809]  ffff880067ea7a28 ffffffff8106773d ffff88011969f000 0000000000000001
[ 2052.697811]  000000000001a5e0 0000000000000000 ffff880035610000 ffff880067ea7a88
[ 2052.697811] Call Trace:
[ 2052.697814]  [<ffffffff8171ed09>] dump_stack+0x45/0x56
[ 2052.697816]  [<ffffffff8106773d>] warn_slowpath_common+0x7d/0xa0
[ 2052.697817]  [<ffffffff810677ac>] warn_slowpath_fmt+0x4c/0x50
[ 2052.697828]  [<ffffffffa012bc91>] intel_ddi_pll_mode_set+0x871/0x8b0 [i915]
[ 2052.697830]  [<ffffffff8136dd89>] ? snprintf+0x39/0x40
[ 2052.697839]  [<ffffffffa00415a7>] ? drm_vblank_get+0x77/0x280 [drm]
[ 2052.697850]  [<ffffffffa0144204>] ? intel_display_power_put+0x64/0x70 [i915]
[ 2052.697860]  [<ffffffffa0119c8b>] haswell_crtc_mode_set+0x3b/0x460 [i915]
[ 2052.697870]  [<ffffffffa011d80b>] __intel_set_mode+0x67b/0x9d0 [i915]
[ 2052.697880]  [<ffffffffa0123325>] intel_modeset_setup_hw_state+0xb55/0xc50 [i915]
[ 2052.697887]  [<ffffffffa00e02b3>] __i915_drm_thaw+0x143/0x200 [i915]
[ 2052.697895]  [<ffffffffa00e0b6b>] i915_resume+0x2b/0x50 [i915]
[ 2052.697902]  [<ffffffffa00e0ba6>] i915_pm_resume+0x16/0x20 [i915]
[ 2052.697904]  [<ffffffff813a92dd>] pci_pm_restore+0x7d/0xd0
[ 2052.697905]  [<ffffffff813a9260>] ? pci_pm_suspend_noirq+0x1a0/0x1a0
[ 2052.697907]  [<ffffffff8149e079>] dpm_run_callback+0x49/0xa0
[ 2052.697908]  [<ffffffff8149e1d6>] device_resume+0xc6/0x1f0
[ 2052.697909]  [<ffffffff8149e31d>] async_resume+0x1d/0x50
[ 2052.697910]  [<ffffffff81091657>] async_run_entry_fn+0x37/0x130
[ 2052.697912]  [<ffffffff810839c2>] process_one_work+0x182/0x450
[ 2052.697913]  [<ffffffff810847b1>] worker_thread+0x121/0x410
[ 2052.697915]  [<ffffffff81084690>] ? rescuer_thread+0x430/0x430
[ 2052.697916]  [<ffffffff8108b492>] kthread+0xd2/0xf0
[ 2052.697917]  [<ffffffff8108b3c0>] ? kthread_create_on_node+0x1c0/0x1c0
[ 2052.697919]  [<ffffffff8172f77c>] ret_from_fork+0x7c/0xb0
[ 2052.697920]  [<ffffffff8108b3c0>] ? kthread_create_on_node+0x1c0/0x1c0
[ 2052.697921] ---[ end trace c2d83f502159fd8f ]---
[ 2052.745471] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2052.745488] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2052.759811] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2052.759812] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2052.759813] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2052.761455] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2052.763903] ata1.00: configured for UDMA/133
[ 2052.777498] sd 0:0:0:0: [sda] Starting disk
[ 2052.788805] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2052.788806] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2052.788807] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2052.801504] ata5.00: configured for UDMA/100
[ 2052.989431] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[ 2053.294262] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 2053.381363] usb 3-5: reset low-speed USB device number 3 using xhci_hcd
[ 2053.400482] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800352b0880
[ 2053.400483] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800352b0980
[ 2053.400486] usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2053.400488] usb 3-5: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2053.565346] usb 3-4: reset high-speed USB device number 2 using xhci_hcd
[ 2053.618904] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800357c4e80
[ 2053.630753] PM: restore of devices complete after 1207.455 msecs
[ 2053.637216] 2:3:1: cannot get freq at ep 0x84
[ 2053.654248] PM: Image restored successfully.
[ 2053.654263] PM: Basic memory bitmaps freed
[ 2053.654264] Restarting tasks ... done.
[ 2053.654824] video LNXVIDEO:00: Restoring backlight state
[ 2053.654885] r8169 0000:02:00.0: no hotplug settings from platform
[ 2054.106865] r8169 0000:02:00.0 eth0: link up
[ 2054.241076] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2117.794378] 2:3:1: cannot get freq at ep 0x84
[ 2117.797396] 2:3:1: cannot get freq at ep 0x84
[ 2122.135200] 2:3:1: cannot get freq at ep 0x84
[ 2122.138218] 2:3:1: cannot get freq at ep 0x84
[ 3081.341054] usb 3-2: new full-speed USB device number 16 using xhci_hcd
[ 3081.341339] usb 3-2: Device not responding to set address.
[ 3081.545088] usb 3-2: Device not responding to set address.
[ 3081.748859] usb 3-2: device not accepting address 16, error -71
[ 3081.860911] usb 3-2: new low-speed USB device number 17 using xhci_hcd
[ 3081.862340] usb 3-2: Device not responding to set address.
[ 3082.065606] usb 3-2: Device not responding to set address.
[ 3082.268720] usb 3-2: device not accepting address 17, error -71
[ 3082.380777] usb 3-2: new low-speed USB device number 18 using xhci_hcd
[ 3082.382209] usb 3-2: Device not responding to set address.
[ 3082.585465] usb 3-2: Device not responding to set address.
[ 3082.788595] usb 3-2: device not accepting address 18, error -71
[ 3082.900576] usb 3-2: new low-speed USB device number 19 using xhci_hcd
[ 3082.902046] usb 3-2: Device not responding to set address.
[ 3083.105321] usb 3-2: Device not responding to set address.
[ 3083.308413] usb 3-2: device not accepting address 19, error -71
[ 3083.308519] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 3138.697837] usb 3-2: new full-speed USB device number 20 using xhci_hcd
[ 3138.698119] usb 3-2: Device not responding to set address.
[ 3138.901913] usb 3-2: Device not responding to set address.
[ 3139.105632] usb 3-2: device not accepting address 20, error -71
[ 3139.217693] usb 3-2: new low-speed USB device number 21 using xhci_hcd
[ 3139.218551] usb 3-2: Device not responding to set address.
[ 3139.421623] usb 3-2: Device not responding to set address.
[ 3139.625517] usb 3-2: device not accepting address 21, error -71
[ 3139.737517] usb 3-2: new full-speed USB device number 22 using xhci_hcd
[ 3139.737740] usb 3-2: Device not responding to set address.
[ 3139.941614] usb 3-2: Device not responding to set address.
[ 3140.145370] usb 3-2: device not accepting address 22, error -71
[ 3140.257335] usb 3-2: new low-speed USB device number 23 using xhci_hcd
[ 3140.258119] usb 3-2: Device not responding to set address.
[ 3140.461260] usb 3-2: Device not responding to set address.
[ 3140.665193] usb 3-2: device not accepting address 23, error -71
[ 3140.665258] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 3214.193849] usb 3-2: new full-speed USB device number 24 using xhci_hcd
[ 3214.194135] usb 3-2: Device not responding to set address.
[ 3214.397997] usb 3-2: Device not responding to set address.
[ 3214.601671] usb 3-2: device not accepting address 24, error -71
[ 3214.713713] usb 3-2: new low-speed USB device number 25 using xhci_hcd
[ 3214.714502] usb 3-2: Device not responding to set address.
[ 3214.917577] usb 3-2: Device not responding to set address.
[ 3215.125507] usb 3-2: device not accepting address 25, error -71
[ 3215.237566] usb 3-2: new low-speed USB device number 26 using xhci_hcd
[ 3215.238416] usb 3-2: Device not responding to set address.
[ 3215.441475] usb 3-2: Device not responding to set address.
[ 3215.645350] usb 3-2: device not accepting address 26, error -71
[ 3215.757477] usb 3-2: new low-speed USB device number 27 using xhci_hcd
[ 3215.758348] usb 3-2: Device not responding to set address.
[ 3215.961353] usb 3-2: Device not responding to set address.
[ 3216.165227] usb 3-2: device not accepting address 27, error -71
[ 3216.165346] hub 3-0:1.0: unable to enumerate USB device on port 2