Pastebin launched a little side project called HostCabi.net, check it out ;-)Don't like ads? PRO users don't see any ads ;-)
Guest

Full dmesg log

By: a guest on Jul 29th, 2013  |  syntax: None  |  size: 39.70 KB  |  hits: 28  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. [    0.000000] Linux version 2.6.27.7 (root@darkstar) (gcc version 4.2.4) #3 PREEMPT Mon Jul 29 19:23:46 EST 2013
  2. [    0.000000] BIOS-provided physical RAM map:
  3. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  4. [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  5. [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  6. [    0.000000]  BIOS-e820: 0000000000100000 - 0000000002010000 (usable)
  7. [    0.000000]  BIOS-e820: 0000000002010000 - 0000000002020000 (ACPI data)
  8. [    0.000000]  BIOS-e820: 0000000002020000 - 0000000002040000 (reserved)
  9. [    0.000000]  BIOS-e820: 00000000fef80000 - 00000000ff000000 (reserved)
  10. [    0.000000]  BIOS-e820: 00000000fffe0000 - 00000000fffe6e00 (reserved)
  11. [    0.000000]  BIOS-e820: 00000000fffe6e00 - 00000000fffe7000 (ACPI NVS)
  12. [    0.000000]  BIOS-e820: 00000000fffe7000 - 0000000100000000 (reserved)
  13. [    0.000000] DMI not present or invalid.
  14. [    0.000000] last_pfn = 0x2010 max_arch_pfn = 0x100000
  15. [    0.000000] kernel direct mapping tables up to 2010000 @ 7000-d000
  16. [    0.000000] ACPI: RSDP 000FA380, 0014 (r0 TOSHIB)
  17. [    0.000000] ACPI: RSDT 02010000, 0028 (r1 TOSHIB 750      19980710 TASM  4010000)
  18. [    0.000000] ACPI: FACP 02010054, 0074 (r1 TOSHIB 750      19980710 TASM  4010000)
  19. [    0.000000] ACPI: DSDT 020100C8, 5230 (r1 TOSHIB 2520CD   19990310 MSFT  100000A)
  20. [    0.000000] ACPI: FACS FFFE6E00, 0040
  21. [    0.000000] 32MB LOWMEM available.
  22. [    0.000000]   mapped low ram: 0 - 02010000
  23. [    0.000000]   low ram: 00000000 - 02010000
  24. [    0.000000]   bootmap 00001000 - 00001404
  25. [    0.000000] (6 early reservations) ==> bootmem [0000000000 - 0002010000]
  26. [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  27. [    0.000000]   #1 [0001000000 - 00013c38e8]    TEXT DATA BSS ==> [0001000000 - 00013c38e8]
  28. [    0.000000]   #2 [00013c4000 - 00013ca000]    INIT_PG_TABLE ==> [00013c4000 - 00013ca000]
  29. [    0.000000]   #3 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  30. [    0.000000]   #4 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
  31. [    0.000000]   #5 [0000001000 - 0000002000]          BOOTMAP ==> [0000001000 - 0000002000]
  32. [    0.000000] Zone PFN ranges:
  33. [    0.000000]   DMA      0x00000000 -> 0x00001000
  34. [    0.000000]   Normal   0x00001000 -> 0x00002010
  35. [    0.000000] Movable zone start PFN for each node
  36. [    0.000000] early_node_map[2] active PFN ranges
  37. [    0.000000]     0: 0x00000000 -> 0x0000009f
  38. [    0.000000]     0: 0x00000100 -> 0x00002010
  39. [    0.000000] On node 0 totalpages: 8111
  40. [    0.000000] free_area_init_node: node 0, pgdat c1322500, node_mem_map c13ca000
  41. [    0.000000]   DMA zone: 3967 pages, LIFO batch:0
  42. [    0.000000]   Normal zone: 4079 pages, LIFO batch:0
  43. [    0.000000] ACPI: PM-Timer IO Port: 0x18a8
  44. [    0.000000] No local APIC present or hardware disabled
  45. [    0.000000] mapped APIC to ffffb000 (01413000)
  46. [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  47. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
  48. [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
  49. [    0.000000] Allocating PCI resources starting at 10000000 (gap: 2040000:fcf40000)
  50. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8046
  51. [    0.000000] Kernel command line: root=/dev/sda1 ro vga=0x303 resume=/dev/sda3 no_console_suspend
  52. [    0.000000] Initializing CPU#0
  53. [    0.000000] Preemptible RCU implementation.
  54. [    0.000000] CPU 0 irqstacks, hard=c136b000 soft=c136a000
  55. [    0.000000] PID hash table entries: 128 (order: 7, 512 bytes)
  56. [    0.000000] TSC: Unable to calibrate against PIT
  57. [    0.000000] TSC: using PMTIMER reference calibration
  58. [    0.000000] Detected 333.264 MHz processor.
  59. [    0.000999] Console: colour dummy device 80x25
  60. [    0.000999] console [tty0] enabled
  61. [    0.000999] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  62. [    0.000999] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  63. [    0.000999] Memory: 28208k/32832k available (2531k kernel code, 4232k reserved, 698k data, 248k init, 0k highmem)
  64. [    0.000999] virtual kernel memory layout:
  65. [    0.000999]     fixmap  : 0xfffb9000 - 0xfffff000   ( 280 kB)
  66. [    0.000999]     vmalloc : 0xc3000000 - 0xfffb7000   ( 975 MB)
  67. [    0.000999]     lowmem  : 0xc0000000 - 0xc2010000   (  32 MB)
  68. [    0.000999]       .init : 0xc1329000 - 0xc1367000   ( 248 kB)
  69. [    0.000999]       .data : 0xc1278f81 - 0xc13277b0   ( 698 kB)
  70. [    0.000999]       .text : 0xc1000000 - 0xc1278f81   (2531 kB)
  71. [    0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  72. [    0.000999] CPA: page pool initialized 1 of 1 pages preallocated
  73. [    0.000999] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  74. [    0.001186] Calibrating delay loop (skipped), value calculated using timer frequency.. 666.52 BogoMIPS (lpj=333264)
  75. [    0.003312] Mount-cache hash table entries: 512
  76. [    0.011247] CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
  77. [    0.012439] CPU: AMD-K6(tm) 3D processor stepping 0c
  78. [    0.013183] Checking 'hlt' instruction... OK.
  79. [    0.017612] Freeing SMP alternatives: 0k freed
  80. [    0.018100] ACPI: Core revision 20080609
  81. [    0.122266] ACPI: setting ELCR to 2000 (from 0804)
  82. [    0.129565] net_namespace: 312 bytes
  83. [    0.131659] NET: Registered protocol family 16
  84. [    0.137574] No dock devices found.
  85. [    0.140777] ACPI: bus type pci registered
  86. [    0.148220] PCI: PCI BIOS revision 2.10 entry at 0xfd82b, last bus=21
  87. [    0.148617] PCI: Using configuration type 1 for base access
  88. [    0.199145] ACPI: EC: Look up EC in DSDT
  89. [    0.265774] ACPI: Interpreter enabled
  90. [    0.266003] ACPI: (supports S0 S1 S3 S4 S5)
  91. [    0.266642] ACPI: Using PIC for interrupt routing
  92. [    0.391620] ACPI: PCI Root Bridge [PCI0] (0000:00)
  93. [    0.393708] PCI: 0000:00:08.0 reg 10 32bit mmio: [f8000000, fbffffff]
  94. [    0.393888] PCI: 0000:00:08.0 reg 30 32bit mmio: [c0000, cffff]
  95. [    0.394130] PCI: 0000:00:0b.0 reg 10 32bit mmio: [f7fff000, f7ffffff]
  96. [    0.394537] PCI: 0000:00:10.0 reg 20 io port: [1800, 180f]
  97. [    0.394774] PCI: 0000:00:11.0 reg 10 io port: [ffe0, ffff]
  98. [    0.395194] PCI: 0000:00:13.0 reg 10 32bit mmio: [0, fff]
  99. [    0.395394] PCI: 0000:00:13.1 reg 10 32bit mmio: [0, fff]
  100. [    0.395815] bus 00 -> node 0
  101. [    0.396007] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  102. [    0.425218] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
  103. [    0.436277] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12)
  104. [    0.447125] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12)
  105. [    0.457833] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12)
  106. [    0.471484] ACPI: PCI Interrupt Link [LNKE] (IRQs) *0, disabled.
  107. [    0.481540] ACPI: Power Resource [PFAN] (off)
  108. [    0.482638] ACPI: Power Resource [PWH1] (on)
  109. [    0.485202] ACPI: Power Resource [PWH2] (on)
  110. [    0.486725] Linux Plug and Play Support v0.97 (c) Adam Belay
  111. [    0.488083] pnp: PnP ACPI init
  112. [    0.488465] ACPI: bus type pnp registered
  113. [    0.489693] pnp 00:00: parse allocated resources
  114. [    0.496840] pnp 00:00:   add mem 0x0-0x9ffff flags 0x1
  115. [    0.496988] pnp 00:00:   add mem 0xf0000-0xfffff flags 0x0
  116. [    0.497080] pnp 00:00:   add mem 0x100000-0x200ffff flags 0x1
  117. [    0.497170] pnp 00:00:   add mem 0x2010000-0x203ffff flags 0x0
  118. [    0.497262] pnp 00:00:   add mem 0xfff00000-0xffffffff flags 0x0
  119. [    0.497356] pnp 00:00:   add mem 0xfef80000-0xfeffffff flags 0x0
  120. [    0.497453] pnp 00:00: PNP0c01: calling <7>pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
  121. [    0.499304] pnp 00:01: parse allocated resources
  122. [    0.499562] pnp 00:01:   add io  0xcf8-0xcff flags 0x1
  123. [    0.501010] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
  124. [    0.511554] pnp 00:02: parse allocated resources
  125. [    0.511753] pnp 00:02:   add io  0x0-0xf flags 0x1
  126. [    0.511834] pnp 00:02:   add io  0x81-0x83 flags 0x1
  127. [    0.511987] pnp 00:02:   add io  0x87-0x87 flags 0x1
  128. [    0.512079] pnp 00:02:   add io  0x89-0x8b flags 0x1
  129. [    0.512162] pnp 00:02:   add io  0x8f-0x8f flags 0x1
  130. [    0.512309] pnp 00:02:   add io  0xc0-0xdf flags 0x1
  131. [    0.512392] pnp 00:02:   add dma 4 flags 0x0
  132. [    0.513720] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
  133. [    0.514123] pnp 00:03: parse allocated resources
  134. [    0.514266] pnp 00:03:   add io  0x61-0x61 flags 0x1
  135. [    0.515529] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
  136. [    0.515767] pnp 00:04: parse allocated resources
  137. [    0.516002] pnp 00:04:   add io  0xf0-0xff flags 0x1
  138. [    0.516091] PCI: setting IRQ 13 as level-triggered
  139. [    0.516170] pnp 00:04:   add irq 13 flags 0x18
  140. [    0.517450] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
  141. [    0.517690] pnp 00:05: parse allocated resources
  142. [    0.517847] pnp 00:05:   add io  0x60-0x60 flags 0x1
  143. [    0.517982] pnp 00:05:   add io  0x64-0x64 flags 0x1
  144. [    0.518066] pnp 00:05:   add irq 1 flags 0x1
  145. [    0.519424] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
  146. [    0.521584] pnp 00:06: parse allocated resources
  147. [    0.528689] pnp 00:06:   add irq 12 flags 0x11
  148. [    0.528771] pnp 00:06: parse resource options
  149. [    0.535891] pnp 00:06:   independent irq 12 flags 0x11
  150. [    0.537320] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
  151. [    0.537561] pnp 00:07: parse allocated resources
  152. [    0.537711] pnp 00:07:   add io  0x70-0x71 flags 0x1
  153. [    0.537795] pnp 00:07:   add irq 8 flags 0x1
  154. [    0.539191] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
  155. [    0.541460] pnp 00:08: parse allocated resources
  156. [    0.541751] pnp 00:08:   add io  0x80-0x80 flags 0x1
  157. [    0.541833] pnp 00:08:   add io  0x84-0x86 flags 0x1
  158. [    0.541984] pnp 00:08:   add io  0x88-0x88 flags 0x1
  159. [    0.542068] pnp 00:08:   add io  0x8c-0x8e flags 0x1
  160. [    0.542149] pnp 00:08:   add io  0xe0-0xef flags 0x1
  161. [    0.542230] pnp 00:08:   add io  0xb0-0xbf flags 0x1
  162. [    0.542312] pnp 00:08:   add io  0x24-0x25 flags 0x1
  163. [    0.542393] pnp 00:08:   add io  0x2e-0x2f flags 0x1
  164. [    0.542474] pnp 00:08:   add io  0x62-0x62 flags 0x1
  165. [    0.542556] pnp 00:08:   add io  0x66-0x66 flags 0x1
  166. [    0.542637] pnp 00:08:   add io  0x68-0x6f flags 0x1
  167. [    0.542719] pnp 00:08:   add io  0x377-0x377 flags 0x1
  168. [    0.542803] pnp 00:08:   add io  0x1882-0x1885 flags 0x1
  169. [    0.542888] pnp 00:08:   add io  0x1888-0x188d flags 0x1
  170. [    0.542978] pnp 00:08:   add io  0x18a0-0x18cf flags 0x1
  171. [    0.543064] pnp 00:08:   add io  0x480-0x48f flags 0x1
  172. [    0.543147] pnp 00:08:   add io  0x4d0-0x4d1 flags 0x1
  173. [    0.543231] pnp 00:08:   add io  0xfe90-0xfe97 flags 0x1
  174. [    0.543316] pnp 00:08:   add io  0xfe9e-0xfe9e flags 0x1
  175. [    0.543402] pnp 00:08: PNP0c02: calling <7>pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
  176. [    0.547315] pnp 00:09: parse allocated resources
  177. [    0.554420] pnp 00:09:   add io  0x3f2-0x3f5 flags 0x1
  178. [    0.554517] pnp 00:09:   add io  0x3f7-0x3f7 flags 0x1
  179. [    0.554602] pnp 00:09:   add irq 6 flags 0x1
  180. [    0.554677] pnp 00:09:   add dma 2 flags 0x0
  181. [    0.554744] pnp 00:09: parse resource options
  182. [    0.561868] pnp 00:09:   independent io  min 0x3f2 max 0x3f2 align 1 size 4 flags 0x1
  183. [    0.562008] pnp 00:09:   independent io  min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1
  184. [    0.562135] pnp 00:09:   independent irq 6 flags 0x1
  185. [    0.562232] pnp 00:09:   independent dma 2 (bitmask 0x4) flags 0x0
  186. [    0.563707] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
  187. [    0.565733] pnp 00:0a: parse allocated resources
  188. [    0.572814] pnp 00:0a:   add io  0x3f8-0x3ff flags 0x1
  189. [    0.572910] pnp 00:0a:   add irq 4 flags 0x11
  190. [    0.572973] pnp 00:0a: parse resource options
  191. [    0.580229] pnp 00:0a:   dependent set 0 (acceptable) io  min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
  192. [    0.580380] pnp 00:0a:   dependent set 1 (acceptable) io  min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
  193. [    0.580522] pnp 00:0a:   dependent set 2 (acceptable) io  min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
  194. [    0.580664] pnp 00:0a:   dependent set 3 (acceptable) io  min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
  195. [    0.580805] pnp 00:0a:   dependent set 4 (acceptable) io  min 0x2c8 max 0x2c8 align 1 size 8 flags 0x1
  196. [    0.581007] pnp 00:0a:   dependent set 5 (acceptable) io  min 0x3a8 max 0x3a8 align 1 size 8 flags 0x1
  197. [    0.581150] pnp 00:0a:   dependent set 6 (acceptable) io  min 0x2a8 max 0x2a8 align 1 size 8 flags 0x1
  198. [    0.581317] pnp 00:0a:   independent irq 3 4 5 7 9 10 11 flags 0x11
  199. [    0.582818] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
  200. [    0.586685] pnp 00:0b: parse allocated resources
  201. [    0.593711] pnp 00:0b:   add io  0x378-0x37a flags 0x1
  202. [    0.593805] pnp 00:0b:   add io  0x778-0x77a flags 0x1
  203. [    0.593890] pnp 00:0b:   add irq 7 flags 0x11
  204. [    0.594012] pnp 00:0b:   add dma 3 flags 0x0
  205. [    0.594080] pnp 00:0b: parse resource options
  206. [    0.601266] pnp 00:0b:   dependent set 0 (acceptable) io  min 0x378 max 0x378 align 1 size 3 flags 0x1
  207. [    0.601415] pnp 00:0b:   dependent set 0 (acceptable) io  min 0x778 max 0x778 align 1 size 3 flags 0x1
  208. [    0.601560] pnp 00:0b:   dependent set 0 (acceptable) irq 7 flags 0x11
  209. [    0.601681] pnp 00:0b:   dependent set 1 (acceptable) io  min 0x278 max 0x278 align 1 size 3 flags 0x1
  210. [    0.601821] pnp 00:0b:   dependent set 1 (acceptable) io  min 0x678 max 0x678 align 1 size 3 flags 0x1
  211. [    0.602005] pnp 00:0b:   dependent set 1 (acceptable) irq 5 flags 0x11
  212. [    0.602127] pnp 00:0b:   dependent set 2 (acceptable) io  min 0x3bc max 0x3bc align 1 size 3 flags 0x1
  213. [    0.602267] pnp 00:0b:   dependent set 2 (acceptable) io  min 0x7bc max 0x7bc align 1 size 3 flags 0x1
  214. [    0.602405] pnp 00:0b:   dependent set 2 (acceptable) irq 7 flags 0x11
  215. [    0.602521] pnp 00:0b:   independent dma 1 2 3 (bitmask 0xe) flags 0x0
  216. [    0.604164] pnp 00:0b: Plug and Play ACPI device, IDs PNP0401 (active)
  217. [    0.609698] pnp 00:0c: parse allocated resources
  218. [    0.616846] pnp 00:0c:   add io  0x220-0x22f flags 0x1
  219. [    0.616984] pnp 00:0c:   add io  0x530-0x537 flags 0x1
  220. [    0.617070] pnp 00:0c:   add io  0x388-0x38f flags 0x1
  221. [    0.617154] pnp 00:0c:   add io  0x330-0x331 flags 0x1
  222. [    0.617238] pnp 00:0c:   add io  0x370-0x371 flags 0x1
  223. [    0.617321] pnp 00:0c:   add irq 5 flags 0x1
  224. [    0.617395] pnp 00:0c:   add dma 1 flags 0x0
  225. [    0.617465] pnp 00:0c:   add dma 0 flags 0x0
  226. [    0.617534] pnp 00:0c: parse resource options
  227. [    0.624754] pnp 00:0c:   dependent set 0 (acceptable) io  min 0x220 max 0x280 align 32 size 16 flags 0x1
  228. [    0.624904] pnp 00:0c:   dependent set 0 (acceptable) io  min 0x530 max 0x560 align 16 size 8 flags 0x1
  229. [    0.625009] pnp 00:0c:   dependent set 0 (acceptable) io  min 0x388 max 0x3b8 align 16 size 8 flags 0x1
  230. [    0.625152] pnp 00:0c:   dependent set 0 (acceptable) io  min 0x330 max 0x360 align 16 size 2 flags 0x1
  231. [    0.625293] pnp 00:0c:   dependent set 0 (acceptable) io  min 0x370 max 0x3a0 align 16 size 2 flags 0x1
  232. [    0.625450] pnp 00:0c:   dependent set 0 (acceptable) irq 5 7 9 11 flags 0x1
  233. [    0.625576] pnp 00:0c:   dependent set 0 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0
  234. [    0.625704] pnp 00:0c:   dependent set 0 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0
  235. [    0.625998] pnp 00:0c:   dependent set 1 (acceptable) io  min 0x220 max 0x280 align 32 size 16 flags 0x1
  236. [    0.626143] pnp 00:0c:   dependent set 1 (acceptable) io  min 0x530 max 0x560 align 16 size 8 flags 0x1
  237. [    0.626285] pnp 00:0c:   dependent set 1 (acceptable) io  min 0x388 max 0x3b8 align 16 size 8 flags 0x1
  238. [    0.626427] pnp 00:0c:   dependent set 1 (acceptable) io  min 0x330 max 0x360 align 16 size 2 flags 0x1
  239. [    0.626569] pnp 00:0c:   dependent set 1 (acceptable) io  min 0x370 max 0x3a0 align 16 size 2 flags 0x1
  240. [    0.626722] pnp 00:0c:   dependent set 1 (acceptable) irq 5 7 9 11 flags 0x1
  241. [    0.626845] pnp 00:0c:   dependent set 1 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0
  242. [    0.628374] pnp 00:0c: Plug and Play ACPI device, IDs YMH0021 (active)
  243. [    0.632764] pnp: PnP ACPI: found 13 devices
  244. [    0.632976] ACPI: ACPI bus type pnp unregistered
  245. [    0.638502] SCSI subsystem initialized
  246. [    0.639570] libata version 3.00 loaded.
  247. [    0.644688] usbcore: registered new interface driver usbfs
  248. [    0.646154] usbcore: registered new interface driver hub
  249. [    0.647838] usbcore: registered new device driver usb
  250. [    0.654007] i2c-core: driver [dummy] registered
  251. [    0.655604] PCI: Using ACPI for IRQ routing
  252. [    0.668650] ACPI: RTC can wake from S4
  253. [    0.674987] pnp: the driver 'system' has been registered
  254. [    0.675220] system 00:00: iomem range 0x0-0x9ffff could not be reserved
  255. [    0.675632] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
  256. [    0.676106] system 00:00: iomem range 0x100000-0x200ffff could not be reserved
  257. [    0.676621] system 00:00: iomem range 0x2010000-0x203ffff could not be reserved
  258. [    0.677187] system 00:00: iomem range 0xfff00000-0xffffffff could not be reserved
  259. [    0.677713] system 00:00: iomem range 0xfef80000-0xfeffffff could not be reserved
  260. [    0.678263] system 00:00: driver attached
  261. [    0.678486] system 00:08: ioport range 0x377-0x377 has been reserved
  262. [    0.678935] system 00:08: ioport range 0x1882-0x1885 has been reserved
  263. [    0.679334] system 00:08: ioport range 0x1888-0x188d has been reserved
  264. [    0.679730] system 00:08: ioport range 0x18a0-0x18cf has been reserved
  265. [    0.680176] system 00:08: ioport range 0x480-0x48f has been reserved
  266. [    0.680568] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
  267. [    0.681006] system 00:08: ioport range 0xfe90-0xfe97 has been reserved
  268. [    0.681406] system 00:08: ioport range 0xfe9e-0xfe9e has been reserved
  269. [    0.681785] system 00:08: driver attached
  270. [    0.729564] pci 0000:00:13.0: CardBus bridge, secondary bus 0000:01
  271. [    0.730025] pci 0000:00:13.0:   IO window: 0x001000-0x0010ff
  272. [    0.730389] pci 0000:00:13.0:   IO window: 0x001400-0x0014ff
  273. [    0.730753] pci 0000:00:13.0:   PREFETCH window: 0x10000000-0x13ffffff
  274. [    0.731201] pci 0000:00:13.0:   MEM window: 0x14000000-0x17ffffff
  275. [    0.731585] pci 0000:00:13.1: CardBus bridge, secondary bus 0000:05
  276. [    0.732012] pci 0000:00:13.1:   IO window: 0x001c00-0x001cff
  277. [    0.732373] pci 0000:00:13.1:   IO window: 0x002000-0x0020ff
  278. [    0.732736] pci 0000:00:13.1:   PREFETCH window: 0x18000000-0x1bffffff
  279. [    0.733184] pci 0000:00:13.1:   MEM window: 0x1c000000-0x1fffffff
  280. [    0.735790] pci 0000:00:13.0: power state changed by ACPI to D0
  281. [    0.736269] pci 0000:00:13.0: enabling device (0000 -> 0003)
  282. [    0.750134] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
  283. [    0.750519] PCI: setting IRQ 11 as level-triggered
  284. [    0.750611] pci 0000:00:13.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  285. [    0.751225] pci 0000:00:13.0: setting latency timer to 64
  286. [    0.753359] pci 0000:00:13.1: power state changed by ACPI to D0
  287. [    0.753751] pci 0000:00:13.1: enabling device (0000 -> 0003)
  288. [    0.767530] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
  289. [    0.767997] pci 0000:00:13.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
  290. [    0.768549] pci 0000:00:13.1: setting latency timer to 64
  291. [    0.768639] bus: 00 index 0 io port: [0, ffff]
  292. [    0.768997] bus: 00 index 1 mmio: [0, ffffffff]
  293. [    0.769309] bus: 01 index 0 io port: [1000, 10ff]
  294. [    0.769624] bus: 01 index 1 io port: [1400, 14ff]
  295. [    0.769992] bus: 01 index 2 mmio: [10000000, 13ffffff]
  296. [    0.770328] bus: 01 index 3 mmio: [14000000, 17ffffff]
  297. [    0.770661] bus: 05 index 0 io port: [1c00, 1cff]
  298. [    0.771026] bus: 05 index 1 io port: [2000, 20ff]
  299. [    0.771346] bus: 05 index 2 mmio: [18000000, 1bffffff]
  300. [    0.771681] bus: 05 index 3 mmio: [1c000000, 1fffffff]
  301. [    0.772217] NET: Registered protocol family 2
  302. [    0.790260] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  303. [    0.791768] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  304. [    0.792482] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  305. [    0.793035] TCP: Hash tables configured (established 1024 bind 1024)
  306. [    0.793415] TCP reno registered
  307. [    0.799425] NET: Registered protocol family 1
  308. [    0.810280] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  309. [    0.811791] VFS: Disk quotas dquot_6.5.1
  310. [    0.812447] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  311. [    0.813574] msgmni has been set to 55
  312. [    0.814648] io scheduler noop registered
  313. [    0.815045] io scheduler cfq registered (default)
  314. [    0.815439] pci 0000:00:08.0: Boot video device
  315. [    0.831419] vesafb: framebuffer at 0xf8000000, mapped to 0xc3080000, using 937k, total 2048k
  316. [    0.832076] vesafb: mode is 800x600x8, linelength=800, pages=3
  317. [    0.832439] vesafb: protected mode interface info at c000:75b2
  318. [    0.832805] vesafb: pmi: set display start = c00c7614, set palette = c00c765d
  319. [    0.833263] vesafb: scrolling: redraw
  320. [    0.833561] vesafb: Pseudocolor: size=6:6:6:6, shift=0:0:0:0
  321. [    0.862747] Console: switching to colour frame buffer device 100x37
  322. [    0.887218] fb0: VESA VGA frame buffer device
  323. [    0.890346] ACPI: AC Adapter [ADP1] (on-line)
  324. [    0.910290] ACPI: Battery Slot [BAT1] (battery present)
  325. [    0.915779] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
  326. [    0.916895] ACPI: Power Button (FF) [PWRF]
  327. [    0.919514] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
  328. [    0.921299] ACPI: Lid Switch [LID]
  329. [    0.940290] ACPI: Transitioning device [FAN] to D3
  330. [    0.955181] fan PNP0C0B:00: registered as cooling_device0
  331. [    0.968993] ACPI: Fan [FAN] (off)
  332. [    0.987955] ACPI: CPU0 (power states: C1[C1] C2[C2])
  333. [    1.003277] processor ACPI0007:00: registered as cooling_device1
  334. [    1.017165] ACPI: Processor [CPU0] (supports 16 throttling states)
  335. [    1.039603] thermal LNXTHERM:01: registered as thermal_zone0
  336. [    1.059214] ACPI: Thermal Zone [THRM] (62 C)
  337. [    1.073947] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18
  338. [    1.087741] toshiba_acpi:     HCI method: \_SB_.VALD.GHCI
  339. [    1.194935] Non-volatile memory driver v1.2
  340. [    1.209542] ipmi message handler version 39.2
  341. [    1.223091] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
  342. [    1.250270] Hangcheck: Using get_cycles().
  343. [    1.264100] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
  344. [    1.441846] Switched to high resolution mode on CPU 0
  345. [    1.442706] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  346. [    1.507815] brd: module loaded
  347. [    1.543382] loop: module loaded
  348. [    1.564336] Driver 'sd' needs updating - please use bus_type methods
  349. [    1.579422] Driver 'sr' needs updating - please use bus_type methods
  350. [    1.597848] scsi0 : ata_generic
  351. [    1.614503] scsi1 : ata_generic
  352. [    1.654800] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1800 irq 14
  353. [    1.668481] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1808 irq 15
  354. [    1.884127] ata1.00: ATA-4: FUJITSU MHF2043AT, A518, max UDMA/33
  355. [    1.897590] ata1.00: 8452080 sectors, multi 0: LBA
  356. [    1.910938] ata1.00: configured for UDMA/33
  357. [    2.094663] ata2.00: ATAPI: CD-224E, 7.5A, max MWDMA2
  358. [    2.107667] ata2.00: configured for MWDMA2
  359. [    2.133013] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHF2043A A518 PQ: 0 ANSI: 5
  360. [    2.150996] sd 0:0:0:0: [sda] 8452080 512-byte hardware sectors (4327 MB)
  361. [    2.164708] sd 0:0:0:0: [sda] Write Protect is off
  362. [    2.177666] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  363. [    2.178645] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  364. [    2.206602] sd 0:0:0:0: [sda] 8452080 512-byte hardware sectors (4327 MB)
  365. [    2.220891] sd 0:0:0:0: [sda] Write Protect is off
  366. [    2.234522] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  367. [    2.235596] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  368. [    2.262897]  sda: sda1 sda2 sda3 sda4
  369. [    2.372838] sd 0:0:0:0: [sda] Attached SCSI disk
  370. [    2.390034] scsi 1:0:0:0: CD-ROM            TEAC     CD-224E          7.5A PQ: 0 ANSI: 5
  371. [    2.414410] sr0: scsi3-mmc drive: 2x/59x cd/rw
  372. [    2.428633] Uniform CD-ROM driver Revision: 3.20
  373. [    2.445675] sr 1:0:0:0: Attached scsi CD-ROM sr0
  374. [    2.451472] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
  375. [    2.454159] ohci_hcd 0000:00:0b.0: power state changed by ACPI to D0
  376. [    2.468241] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
  377. [    2.482388] ohci_hcd 0000:00:0b.0: OHCI Host Controller
  378. [    2.499474] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
  379. [    2.513719] ohci_hcd 0000:00:0b.0: irq 11, io mem 0xf7fff000
  380. [    3.091495] usb usb1: configuration #1 chosen from 1 choice
  381. [    3.106944] hub 1-0:1.0: USB hub found
  382. [    3.120892] hub 1-0:1.0: 2 ports detected
  383. [    3.649975] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
  384. [    3.664179] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  385. [    3.678554] usb usb1: Product: OHCI Host Controller
  386. [    3.692544] usb usb1: Manufacturer: Linux 2.6.27.7 ohci_hcd
  387. [    3.706740] usb usb1: SerialNumber: 0000:00:0b.0
  388. [    3.723141] usbcore: registered new interface driver cdc_acm
  389. [    3.737453] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
  390. [    3.753298] usbcore: registered new interface driver usblp
  391. [    3.769162] usbcore: registered new interface driver cdc_wdm
  392. [    3.783791] Initializing USB Mass Storage driver...
  393. [    3.799271] usbcore: registered new interface driver usb-storage
  394. [    3.813638] USB Mass Storage support registered.
  395. [    3.828961] usbcore: registered new interface driver libusual
  396. [    3.843273] pnp: the driver 'i8042 kbd' has been registered
  397. [    3.843547] i8042 kbd 00:05: driver attached
  398. [    3.844623] pnp: the driver 'i8042 aux' has been registered
  399. [    3.844909] i8042 aux 00:06: driver attached
  400. [    3.845978] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  401. [    3.869469] serio: i8042 KBD port at 0x60,0x64 irq 1
  402. [    3.883597] serio: i8042 AUX port at 0x60,0x64 irq 12
  403. [    3.899918] mice: PS/2 mouse device common for all mice
  404. [    3.929838] pnp: the driver 'rtc_cmos' has been registered
  405. [    3.931972] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
  406. [    3.945717] rtc0: alarms up to one year, y3k
  407. [    3.959146] rtc_cmos 00:07: driver attached
  408. [    3.963384] cpuidle: using governor ladder
  409. [    3.982754] cpuidle: using governor menu
  410. [    3.999706] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
  411. [    4.013943] usbcore: registered new interface driver hiddev
  412. [    4.028523] usbcore: registered new interface driver usbhid
  413. [    4.041753] usbhid: v2.6:USB HID core driver
  414. [    4.056146] Advanced Linux Sound Architecture Driver Version 1.0.17.
  415. [    4.136771] pnp: the driver 'snd-opl3sa2-pnpbios' has been registered
  416. [    4.139031] Marking TSC unstable due to TSC halts in idle
  417. [    4.178851] snd-opl3sa2-pnpbios 00:0c: driver attached
  418. [    4.179837] pnp: the driver 'snd-opl3sa2-cpnp' has been registered
  419. [    4.181120] ALSA device list:
  420. [    4.194104]   #0: Yamaha OPL3-SA23 at 0x370, irq 5, dma 1&0
  421. [    4.207507] TCP cubic registered
  422. [    4.220447] Using IPI Shortcut mode
  423. [    4.286455] VFS: Mounted root (ext2 filesystem) readonly.
  424. [    4.308528] Freeing unused kernel memory: 248k freed
  425. [    4.322698] Write protecting the kernel text: 2532k
  426. [    4.335759] Write protecting the kernel read-only data: 536k
  427. [   11.702985] pnp: the driver 'serial' has been registered
  428. [   11.705451] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  429. [   11.706952] serial 00:0a: driver attached
  430. [   15.389397] pnp: the driver 'parport_pc' has been registered
  431. [   15.389759] parport_pc 00:0b: reported by Plug and Play ACPI
  432. [   15.390650] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
  433. [   15.392157] parport_pc 00:0b: driver attached
  434. [   16.234544] Yenta: CardBus bridge found at 0000:00:13.0 [1179:0001]
  435. [   16.359216] Yenta: ISA IRQ mask 0x0618, PCI irq 11
  436. [   16.359842] Socket status: 30000020
  437. [   16.397784] Yenta: CardBus bridge found at 0000:00:13.1 [1179:0001]
  438. [   16.523200] Yenta: ISA IRQ mask 0x0618, PCI irq 11
  439. [   16.523833] Socket status: 30000007
  440. [   17.026222] pccard: CardBus card inserted into slot 0
  441. [   17.027388] PCI: 0000:01:00.0 reg 10 32bit mmio: [0, fff]
  442. [   17.027729] pci 0000:01:00.0: supports D1
  443. [   17.027815] pci 0000:01:00.0: supports D2
  444. [   17.027910] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
  445. [   17.070260] pci 0000:01:00.0: PME# disabled
  446. [   17.179388] PCI: 0000:01:00.1 reg 10 32bit mmio: [0, fff]
  447. [   17.179645] pci 0000:01:00.1: supports D1
  448. [   17.179707] pci 0000:01:00.1: supports D2
  449. [   17.179776] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot
  450. [   17.262802] pci 0000:01:00.1: PME# disabled
  451. [   17.327635] PCI: 0000:01:00.2 reg 10 32bit mmio: [0, ff]
  452. [   17.327885] pci 0000:01:00.2: supports D1
  453. [   17.327946] pci 0000:01:00.2: supports D2
  454. [   17.328015] pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot
  455. [   17.399182] pci 0000:01:00.2: PME# disabled
  456. [   17.477583] ohci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
  457. [   17.567279] ohci_hcd 0000:01:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  458. [   17.645324] ohci_hcd 0000:01:00.0: setting latency timer to 64
  459. [   17.645427] ohci_hcd 0000:01:00.0: OHCI Host Controller
  460. [   17.745343] ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  461. [   17.843430] ohci_hcd 0000:01:00.0: irq 11, io mem 0x14000000
  462. [   18.035281] usb usb2: configuration #1 chosen from 1 choice
  463. [   18.140714] hub 2-0:1.0: USB hub found
  464. [   18.231448] hub 2-0:1.0: 3 ports detected
  465. [   18.423184] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  466. [   18.488936] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  467. [   18.577191] usb usb2: Product: OHCI Host Controller
  468. [   18.840600] usb usb2: Manufacturer: Linux 2.6.27.7 ohci_hcd
  469. [   18.918694] usb usb2: SerialNumber: 0000:01:00.0
  470. [   18.976785] ohci_hcd 0000:01:00.1: enabling device (0000 -> 0002)
  471. [   19.048287] ohci_hcd 0000:01:00.1: PCI INT B -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  472. [   19.109325] ohci_hcd 0000:01:00.1: setting latency timer to 64
  473. [   19.109423] ohci_hcd 0000:01:00.1: OHCI Host Controller
  474. [   19.170971] ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 3
  475. [   19.281460] ohci_hcd 0000:01:00.1: irq 11, io mem 0x14001000
  476. [   19.475291] usb usb3: configuration #1 chosen from 1 choice
  477. [   19.552258] hub 3-0:1.0: USB hub found
  478. [   19.615430] hub 3-0:1.0: 2 ports detected
  479. [   19.778901] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  480. [   19.795979] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  481. [   19.877156] usb usb3: Product: OHCI Host Controller
  482. [   19.934196] usb usb3: Manufacturer: Linux 2.6.27.7 ohci_hcd
  483. [   19.994199] usb usb3: SerialNumber: 0000:01:00.1
  484. [   20.060693] ehci_hcd 0000:01:00.2: enabling device (0000 -> 0002)
  485. [   20.139340] ehci_hcd 0000:01:00.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  486. [   20.210302] ehci_hcd 0000:01:00.2: EHCI Host Controller
  487. [   20.285610] ehci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 4
  488. [   20.365226] irda_init()
  489. [   20.365597] NET: Registered protocol family 23
  490. [   20.421464] ehci_hcd 0000:01:00.2: irq 11, io mem 0x14002000
  491. [   20.479226] ehci_hcd 0000:01:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  492. [   20.548203] usb usb4: configuration #1 chosen from 1 choice
  493. [   20.618293] hub 4-0:1.0: USB hub found
  494. [   20.691427] hub 4-0:1.0: 5 ports detected
  495. [   20.863186] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
  496. [   20.903204] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  497. [   20.967183] usb usb4: Product: EHCI Host Controller
  498. [   21.034309] usb usb4: Manufacturer: Linux 2.6.27.7 ehci_hcd
  499. [   21.093224] donauboe 0000:00:11.0: power state changed by ACPI to D0
  500. [   21.117269] usb usb4: SerialNumber: 0000:01:00.2
  501. [   21.251437] donauboe 0000:00:11.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  502. [   21.253962] IrDA: Registered device irda0
  503. [   21.254116] toshoboe: Using multiple tasks
  504. [   23.291295] ppdev: user-space parallel port driver
  505. [   27.816692] Adding 95980k swap on /dos/swap.  Priority:-1 extents:30 across:124856k
  506. [ 1222.703268] usb 1-1: new full speed USB device using ohci_hcd and address 2
  507. [ 1222.904022] usb 1-1: configuration #1 chosen from 1 choice
  508. [ 1222.915487] usb 1-1: New USB device found, idVendor=0fe6, idProduct=9700
  509. [ 1222.915621] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  510. [ 1222.915708] usb 1-1: Product: USB 2.0 10/100M Ethernet Adaptor
  511. [ 1224.103469] eth0: register 'dm9601' at usb-0000:00:0b.0-1, Davicom DM9601 USB Ethernet, 00:e0:4c:53:44:58
  512. [ 1224.107532] usbcore: registered new interface driver dm9601
  513. [ 1225.370069] SysRq : Changing Loglevel
  514. [ 1225.370879] Loglevel set to 9
  515. [ 1238.267746] eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
  516. [ 1243.567220] NET: Registered protocol family 17
  517. [ 1253.583198] eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
  518. [ 1253.780178] eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
  519. [ 1261.705575] usb 1-1: USB disconnect, address 2
  520. [ 1261.744677] eth0: unregister 'dm9601' usb-0000:00:0b.0-1, Davicom DM9601 USB Ethernet
  521. [ 6560.437255] usb 1-1: new full speed USB device using ohci_hcd and address 3
  522. [ 6560.634306] usb 1-1: not running at top speed; connect to a high speed hub
  523. [ 6560.688379] usb 1-1: configuration #1 chosen from 1 choice
  524. [ 6560.740280] scsi2 : SCSI emulation for USB Mass Storage devices
  525. [ 6560.780308] usb-storage: device found at 3
  526. [ 6560.816329] usb 1-1: New USB device found, idVendor=058f, idProduct=6362
  527. [ 6560.844192] usb-storage: waiting for device to settle before scanning
  528. [ 6560.868374] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  529. [ 6560.887609] usb 1-1: Product: Mass Storage Device
  530. [ 6560.906435] usb 1-1: Manufacturer: Generic
  531. [ 6561.005246] usb 1-1: SerialNumber: 058F312D81B
  532. [ 6565.871891] usb-storage: device scan complete
  533. [ 6565.895760] scsi 2:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
  534. [ 6565.921800] scsi 2:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
  535. [ 6565.947770] scsi 2:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
  536. [ 6565.972763] scsi 2:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
  537. [ 6566.025778] sd 2:0:0:0: [sdb] Attached SCSI removable disk
  538. [ 6566.078818] sd 2:0:0:1: [sdc] Attached SCSI removable disk
  539. [ 6566.165766] sd 2:0:0:2: [sdd] Attached SCSI removable disk
  540. [ 6566.261873] sd 2:0:0:3: [sde] Attached SCSI removable disk
  541. [ 6589.517806] SysRq : Changing Loglevel
  542. [ 6589.518679] Loglevel set to 0
  543. [ 6599.753999] sd 2:0:0:1: [sdc] 4001760 512-byte hardware sectors (2049 MB)
  544. [ 6599.767986] sd 2:0:0:1: [sdc] Write Protect is off
  545. [ 6599.768198] sd 2:0:0:1: [sdc] Mode Sense: 03 00 00 00
  546. [ 6599.768281] sd 2:0:0:1: [sdc] Assuming drive cache: write through
  547. [ 6599.792966] sd 2:0:0:1: [sdc] 4001760 512-byte hardware sectors (2049 MB)
  548. [ 6599.806971] sd 2:0:0:1: [sdc] Write Protect is off
  549. [ 6599.807183] sd 2:0:0:1: [sdc] Mode Sense: 03 00 00 00
  550. [ 6599.807265] sd 2:0:0:1: [sdc] Assuming drive cache: write through
  551. [ 6599.807352]  sdc: sdc1 sdc2 sdc3 < sdc5 >
  552. [ 6986.274743] usb 1-1: USB disconnect, address 3
  553. [ 7045.113440] pccard: card ejected from slot 0
  554. [ 7045.146889] ohci_hcd 0000:01:00.0: remove, state 4
  555. [ 7045.148460] usb usb2: USB disconnect, address 1
  556. [ 7045.167409] ohci_hcd 0000:01:00.0: USB bus 2 deregistered
  557. [ 7045.175966] ohci_hcd 0000:01:00.0: PCI INT A disabled
  558. [ 7045.185910] ohci_hcd 0000:01:00.1: remove, state 4
  559. [ 7045.187661] usb usb3: USB disconnect, address 1
  560. [ 7045.192685] ohci_hcd 0000:01:00.1: USB bus 3 deregistered
  561. [ 7045.209380] ohci_hcd 0000:01:00.1: PCI INT B disabled
  562. [ 7045.219145] ehci_hcd 0000:01:00.2: remove, state 4
  563. [ 7045.220777] usb usb4: USB disconnect, address 1
  564. [ 7045.225862] ehci_hcd 0000:01:00.2: USB bus 4 deregistered
  565. [ 7045.243530] ehci_hcd 0000:01:00.2: PCI INT C disabled
  566. [ 7048.448640] SysRq : Changing Loglevel
  567. [ 7048.449536] Loglevel set to 9
  568. [ 7051.108230] pccard: CardBus card inserted into slot 0
  569. [ 7051.120524] PCI: 0000:01:00.0 reg 10 32bit mmio: [0, fff]
  570. [ 7051.132460] pci 0000:01:00.0: supports D1
  571. [ 7051.143928] pci 0000:01:00.0: supports D2
  572. [ 7051.155389] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
  573. [ 7051.167159] pci 0000:01:00.0: PME# disabled
  574. [ 7051.178904] PCI: 0000:01:00.1 reg 10 32bit mmio: [0, fff]
  575. [ 7051.190891] pci 0000:01:00.1: supports D1
  576. [ 7051.202621] pci 0000:01:00.1: supports D2
  577. [ 7051.214297] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot
  578. [ 7051.225995] pci 0000:01:00.1: PME# disabled
  579. [ 7051.237599] PCI: 0000:01:00.2 reg 10 32bit mmio: [0, ff]
  580. [ 7051.249312] pci 0000:01:00.2: supports D1
  581. [ 7051.260753] pci 0000:01:00.2: supports D2
  582. [ 7051.272334] pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot
  583. [ 7051.284239] pci 0000:01:00.2: PME# disabled
  584. [ 7051.310973] ohci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
  585. [ 7051.328159] ohci_hcd 0000:01:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  586. [ 7051.341389] ohci_hcd 0000:01:00.0: setting latency timer to 64
  587. [ 7051.360862] ohci_hcd 0000:01:00.0: OHCI Host Controller
  588. [ 7051.393510] ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  589. [ 7051.409461] ohci_hcd 0000:01:00.0: irq 11, io mem 0x14000000
  590. [ 7051.510536] usb usb2: configuration #1 chosen from 1 choice
  591. [ 7051.528358] hub 2-0:1.0: USB hub found
  592. [ 7051.544181] hub 2-0:1.0: 3 ports detected
  593. [ 7051.763802] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  594. [ 7051.797015] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  595. [ 7051.829214] usb usb2: Product: OHCI Host Controller
  596. [ 7051.847506] usb usb2: Manufacturer: Linux 2.6.27.7 ohci_hcd
  597. [ 7051.861542] usb usb2: SerialNumber: 0000:01:00.0
  598. [ 7051.890418] ohci_hcd 0000:01:00.1: enabling device (0000 -> 0002)
  599. [ 7051.939423] ohci_hcd 0000:01:00.1: PCI INT B -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  600. [ 7051.954651] usb 2-1: new full speed USB device using ohci_hcd and address 2
  601. [ 7051.970392] ohci_hcd 0000:01:00.1: setting latency timer to 64
  602. [ 7051.985554] ohci_hcd 0000:01:00.1: OHCI Host Controller
  603. [ 7052.016434] ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 3
  604. [ 7052.052346] ohci_hcd 0000:01:00.1: irq 11, io mem 0x14001000
  605. [ 7052.171954] usb usb3: configuration #1 chosen from 1 choice
  606. [ 7052.204885] hub 3-0:1.0: USB hub found
  607. [ 7052.256301] hub 3-0:1.0: 2 ports detected
  608. [ 7052.389705] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  609. [ 7052.431813] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  610. [ 7052.450938] usb usb3: Product: OHCI Host Controller
  611. [ 7052.467671] usb usb3: Manufacturer: Linux 2.6.27.7 ohci_hcd
  612. [ 7052.484568] usb usb3: SerialNumber: 0000:01:00.1
  613. [ 7052.516207] ehci_hcd 0000:01:00.2: enabling device (0000 -> 0002)
  614. [ 7052.567936] ehci_hcd 0000:01:00.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  615. [ 7052.585872] ehci_hcd 0000:01:00.2: EHCI Host Controller
  616. [ 7052.618421] ehci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 4
  617. [ 7052.678395] ehci_hcd 0000:01:00.2: irq 11, io mem 0x14002000
  618. [ 7052.702206] ehci_hcd 0000:01:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  619. [ 7052.735436] usb usb4: configuration #1 chosen from 1 choice
  620. [ 7052.775320] hub 4-0:1.0: USB hub found
  621. [ 7052.828627] hub 4-0:1.0: 5 ports detected
  622. [ 7053.064722] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
  623. [ 7053.112341] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  624. [ 7053.130655] usb usb4: Product: EHCI Host Controller
  625. [ 7053.148322] usb usb4: Manufacturer: Linux 2.6.27.7 ehci_hcd
  626. [ 7053.166274] usb usb4: SerialNumber: 0000:01:00.2
  627. [ 7056.969272] ohci_hcd 0000:01:00.0: Unlink after no-IRQ?  Controller is probably using the wrong IRQ.