Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- bash-5.0# qemu-system-arm -M orangepi-pc -nic user -nographic -sd a.img
- WARNING: Image format was not specified for 'a.img' and probing guessed raw.
- Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
- Specify the 'raw' format explicitly to remove the restrictions.
- U-Boot SPL 2020.01 (May 08 2020 - 17:11:43 -0600)
- DRAM: 1024 MiB
- Failed to set core voltage! Can't set CPU frequency
- Trying to boot from MMC1
- U-Boot 2020.01 (May 08 2020 - 17:11:43 -0600) Allwinner Technology
- CPU: Allwinner H3 (SUN8I 0000)
- Model: Xunlong Orange Pi PC
- DRAM: 1 GiB
- MMC: mmc@1c0f000: 0
- Loading Environment from FAT... *** Warning - bad CRC, using default environment
- Warning: HDMI PHY init timeout!
- Warning: HDMI PHY init timeout!
- In: serial
- Out: serial
- Err: serial
- Net: phy interface0
- eth0: ethernet@1c30000
- starting USB...
- Bus usb@1c1a000: USB EHCI 1.00
- Bus usb@1c1a400: USB OHCI 1.0
- Bus usb@1c1b000: USB EHCI 1.00
- Bus usb@1c1b400: USB OHCI 1.0
- Bus usb@1c1c000: USB EHCI 1.00
- Bus usb@1c1c400: USB OHCI 1.0
- Bus usb@1c1d000: USB EHCI 1.00
- Bus usb@1c1d400: USB OHCI 1.0
- scanning bus usb@1c1a000 for devices... 1 USB Device(s) found
- scanning bus usb@1c1a400 for devices... 1 USB Device(s) found
- scanning bus usb@1c1b000 for devices... 1 USB Device(s) found
- scanning bus usb@1c1b400 for devices... 1 USB Device(s) found
- scanning bus usb@1c1c000 for devices... 1 USB Device(s) found
- scanning bus usb@1c1c400 for devices... 1 USB Device(s) found
- scanning bus usb@1c1d000 for devices... 1 USB Device(s) found
- scanning bus usb@1c1d400 for devices... 1 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- 21469 bytes read in 25 ms (837.9 KiB/s)
- Found EFI removable media binary efi/boot/bootarm.efi
- Scanning disk mmc@1c0f000.blk...
- ** Unrecognized filesystem type **
- Found 3 disks
- Warning: HDMI PHY init timeout!
- BootOrder not defined
- EFI boot manager: Cannot load any image
- 88176 bytes read in 81 ms (1 MiB/s)
- >> OpenBSD/armv7 BOOTARM 1.6
- boot> boot bsd.rd
- cannot open sd0a:/etc/random.seed: No such file or directory
- booting sd0a:bsd.rd: 2199980+461772+8065552+452300 [191791+120+347120+188040]=0x0
- OpenBSD/armv7 booting ...
- arg0 0xc0e5c360 arg1 0x0 arg2 0x47ef7000
- Allocating page tables
- IRQ stack: p0x40e8b000 v0xc0e8b000
- ABT stack: p0x40e8c000 v0xc0e8c000
- UND stack: p0x40e8d000 v0xc0e8d000
- SVC stack: p0x40e8e000 v0xc0e8e000
- Creating L1 page table at 0x40e60000
- Mapping kernel
- Constructing L2 page tables
- undefined page type 0x2 pa 0x40000000 va 0x40000000 pages 0x2000 attr 0x8
- type 0x7 pa 0x42000000 va 0x42000000 pages 0x5ef7 attr 0x8
- type 0x4 pa 0x47ef7000 va 0x47ef7000 pages 0x12 attr 0x8
- type 0x7 pa 0x47f09000 va 0x47f09000 pages 0x30403 attr 0x8
- type 0x2 pa 0x7830c000 va 0x7830c000 pages 0xb2c attr 0x8
- type 0x4 pa 0x78e38000 va 0x78e38000 pages 0x1 attr 0x8
- type 0x7 pa 0x78e39000 va 0x78e39000 pages 0x1 attr 0x8
- type 0x2 pa 0x78e3a000 va 0x78e3a000 pages 0x100 attr 0x8
- type 0x1 pa 0x78f3a000 va 0x78f3a000 pages 0x16 attr 0x8
- type 0x0 pa 0x78f50000 va 0x78f50000 pages 0x5 attr 0x8
- type 0x4 pa 0x78f55000 va 0x78f55000 pages 0x1 attr 0x8
- type 0x6 pa 0x78f56000 va 0x78f56000 pages 0x1 attr 0x8000000000000008
- type 0x4 pa 0x78f57000 va 0x78f57000 pages 0x2 attr 0x8
- type 0x0 pa 0x78f59000 va 0x78f59000 pages 0x4 attr 0x8
- type 0x4 pa 0x78f5d000 va 0x78f5d000 pages 0x2 attr 0x8
- type 0x0 pa 0x78f5f000 va 0x78f5f000 pages 0x2 attr 0x8
- type 0x6 pa 0x78f61000 va 0x78f61000 pages 0x1 attr 0x8000000000000008
- type 0x0 pa 0x78f62000 va 0x78f62000 pages 0x1 attr 0x8
- type 0x2 pa 0x78f63000 va 0x78f63000 pages 0x5027 attr 0x8
- type 0x5 pa 0x7df8a000 va 0x7df8a000 pages 0x1 attr 0x8000000000000008
- type 0x2 pa 0x7df8b000 va 0x7df8b000 pages 0x2075 attr 0x8
- pmap board type: 0
- Copyright (c) 1982, 1986, 1989, 1991, 1993
- The Regents of the University of California. All rights reserved.
- Copyright (c) 1995-2019 OpenBSD. All rights reserved. https://www.OpenBSD.org
- OpenBSD 6.6 (RAMDISK) #203: Sat Oct 12 09:26:27 MDT 2019
- deraadt@armv7.openbsd.org:/usr/src/sys/arch/armv7/compile/RAMDISK
- real mem = 942645248 (898MB)
- avail mem = 909217792 (867MB)
- mainbus0 at root: Xunlong Orange Pi PC
- cpu0 at mainbus0 mpidr 0: ARM Cortex-A7 r0p5
- cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 2-way L1 D-cache
- cpu0: 2304KB 64b/line 16-way L2 cache
- psci0 at mainbus0: PSCI 0.0
- sxiccmu0 at mainbus0
- simplebus0 at mainbus0: "soc"
- sxiccmu1 at simplebus0
- sxipio0 at simplebus0: 94 pins
- ampintc0 at simplebus0 nirq 160, ncpu 4: "interrupt-controller"
- sxirtc0 at simplebus0
- sxiccmu2 at simplebus0
- sxipio1 at simplebus0: 12 pins
- sxisyscon0 at simplebus0
- "clock" at simplebus0 not configured
- "mixer" at simplebus0 not configured
- "dma-controller" at simplebus0 not configured
- "lcd-controller" at simplebus0 not configured
- sximmc0 at simplebus0
- sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
- "eeprom" at simplebus0 not configured
- "usb" at simplebus0 not configured
- "phy" at simplebus0 not configured
- ehci0 at simplebus0
- usb0 at ehci0: USB revision 2.0
- uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
- ohci0 at simplebus0: version 1.0
- ehci1 at simplebus0
- usb1 at ehci1: USB revision 2.0
- uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
- ohci1 at simplebus0: version 1.0
- ehci2 at simplebus0
- usb2 at ehci2: USB revision 2.0
- uhub2 at usb2 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
- ohci2 at simplebus0: version 1.0
- ehci3 at simplebus0
- usb3 at ehci3: USB revision 2.0
- uhub3 at usb3 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
- ohci3 at simplebus0: version 1.0
- "timer" at simplebus0 not configured
- dwxe0 at simplebus0: address 02:81:4a:58:bd:80
- ukphy0 at dwxe0 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI 0x001105, model 0x0000
- "dram-controller" at simplebus0 not configured
- sxidog0 at simplebus0
- "codec" at simplebus0 not configured
- com0 at simplebus0: ns16550, no working fifo
- com0: console
- "hdmi" at simplebus0 not configured
- "hdmi-phy" at simplebus0 not configured
- "codec-analog" at simplebus0 not configured
- "ir" at simplebus0 not configured
- sxitwi0 at simplebus0
- iic0 at sxitwi0
- "silergy,sy8106a" at iic0 addr 0x65 not configured
- "deinterlace" at simplebus0 not configured
- "video-codec" at simplebus0 not configured
- "crypto" at simplebus0 not configured
- "gpu" at simplebus0 not configured
- "thermal-sensor" at simplebus0 not configured
- gpio0 at sxipio0: 32 pins
- gpio1 at sxipio0: 32 pins
- gpio2 at sxipio0: 32 pins
- gpio3 at sxipio0: 32 pins
- gpio4 at sxipio0: 32 pins
- gpio5 at sxipio0: 32 pins
- gpio6 at sxipio0: 32 pins
- gpio7 at sxipio1: 32 pins
- usb4 at ohci0: USB revision 1.0
- uhub4 at usb4 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
- usb5 at ohci1: USB revision 1.0
- uhub5 at usb5 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
- usb6 at ohci2: USB revision 1.0
- uhub6 at usb6 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
- usb7 at ohci3: USB revision 1.0
- uhub7 at usb7 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
- agtimer0 at mainbus0: tick rate 24000 KHz
- scsibus0 at sdmmc0: 2 targets, initiator 0
- sd0 at scsibus0 targ 1 lun 0: <SD/MMC, QEMU!, 0001> removable
- sd0: 48MB, 512 bytes/sector, 98304 sectors
- softraid0 at root
- scsibus1 at softraid0: 256 targets
- bootfile: sd0a:/bsd
- boot device: sd0
- root on rd0a swap on rd0b dump on rd0b
- WARNING: clock gained 14867 days
- WARNING: CHECK AND RESET THE DATE!
- cpu0: regulator not implemented
- erase ^?, werase ^W, kill ^U, intr ^C, status ^T
- Welcome to the OpenBSD/armv7 6.6 installation program.
- (I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement