Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.39-2-amd64] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Caviar Green (Adv. Format)
- Device Model: WDC WD10EARS-00MVWB0
- Serial Number: WD-WCAZA0825386
- LU WWN Device Id: 5 0014ee 6006f758b
- Firmware Version: 51.0AB51
- User Capacity: 1.000.204.886.016 bytes [1,00 TB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: Exact ATA specification draft version not indicated
- Local Time is: Mon Dec 12 22:01:20 2011 ART
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x85) Offline data collection activity
- was aborted by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 121) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: (25080) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 244) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x3035) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 185 184 051 Pre-fail Always - 731
- 3 Spin_Up_Time 0x0027 167 165 021 Pre-fail Always - 6633
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 271
- 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
- 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1054
- 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 270
- 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 178
- 193 Load_Cycle_Count 0x0032 187 187 000 Old_age Always - 39185
- 194 Temperature_Celsius 0x0022 115 103 000 Old_age Always - 35
- 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 62
- 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 10
- 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 10
- SMART Error Log Version: 1
- ATA Error Count: 1077 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 1077 occurred at disk power-on lifetime: 1044 hours (43 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 58 1e a6 ea Error: UNC 8 sectors at LBA = 0x0aa61e58 = 178658904
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 58 1e a6 ea 0a 01:09:36.418 READ DMA
- ec 00 00 00 00 00 a0 0a 01:09:36.410 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 0a 01:09:36.410 SET FEATURES [Set transfer mode]
- Error 1076 occurred at disk power-on lifetime: 1044 hours (43 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 58 1e a6 ea Error: UNC 8 sectors at LBA = 0x0aa61e58 = 178658904
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 58 1e a6 ea 0a 01:09:33.553 READ DMA
- ec 00 00 00 00 00 a0 0a 01:09:33.545 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 0a 01:09:33.545 SET FEATURES [Set transfer mode]
- Error 1075 occurred at disk power-on lifetime: 1044 hours (43 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 58 1e a6 ea Error: UNC 8 sectors at LBA = 0x0aa61e58 = 178658904
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 58 1e a6 ea 0a 01:09:30.688 READ DMA
- ec 00 00 00 00 00 a0 0a 01:09:30.680 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 0a 01:09:30.680 SET FEATURES [Set transfer mode]
- Error 1074 occurred at disk power-on lifetime: 1044 hours (43 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 58 1e a6 ea Error: UNC 8 sectors at LBA = 0x0aa61e58 = 178658904
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 58 1e a6 ea 0a 01:09:27.823 READ DMA
- ec 00 00 00 00 00 a0 0a 01:09:27.815 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 0a 01:09:27.815 SET FEATURES [Set transfer mode]
- Error 1073 occurred at disk power-on lifetime: 1044 hours (43 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 58 1e a6 ea Error: UNC 8 sectors at LBA = 0x0aa61e58 = 178658904
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 58 1e a6 ea 0a 01:09:24.957 READ DMA
- ec 00 00 00 00 00 a0 0a 01:09:24.951 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 0a 01:09:24.950 SET FEATURES [Set transfer mode]
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed: read failure 90% 1054 123868660
- # 2 Short offline Completed: read failure 90% 1054 123868660
- # 3 Conveyance offline Completed: read failure 90% 1043 123868660
- # 4 Extended offline Completed: read failure 90% 1043 123868656
- # 5 Short offline Completed: read failure 90% 1043 123868660
- # 6 Short offline Completed: read failure 90% 1043 123868656
- # 7 Short offline Completed: read failure 90% 1043 123868660
- # 8 Short offline Completed: read failure 90% 1043 123868656
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement