Automatic boot of image at addr 0x80800000 ...
## Booting image at 80800000 ...
   Image Name:   FreeBSD
   Created:      2015-12-27  11:56:15 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    6083606 Bytes =  5.8 MB
   Load Address: 80001100
   Entry Point:  80001100
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80001100) ...
## Giving linux memsize in MB, 32

Starting kernel ...

U-Boot args (from 0 args):
        None
Environment:
        memsize=32
        initrd_start=0x00000000
        initrd_size=0x0
        flash_start=0x00000000
        flash_size=0x800000
entry: mips_init()
Cache info:
  picache_stride    = 4096
  picache_loopcount = 8
  pdcache_stride    = 4096
  pdcache_loopcount = 4
cpu0: MIPS Technologies processor v76.150
  MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
  L1 i-cache: 4 ways of 256 sets, 32 bytes per line
  L1 d-cache: 4 ways of 128 sets, 32 bytes per line
  L2 cache: disabled
  Config1=0xbea3319e<PerfCount,WatchRegs,MIPS16,EJTAG>
  Config2=0x80000000
  Config3=0x420
Physical memory chunk(s):
0x8c5000 - 0x1ffffff, 24358912 bytes (5947 pages)
Maxmem is 0x2000000
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #20 d1bbd87(master)-dirty: Sun Dec 27 17:25:42 IST 2015
    anant@bsd:/usr/home/anant/obj/mipsel/mips.mipsel/usr/home/anant/freebsd/sys/RT5350 mips
gcc version 4.2.1 20070831 patched [FreeBSD]
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "kernel" at 0x808be890.
real memory  = 33554432 (32768K bytes)
Physical memory chunk(s):
0x00951000 - 0x01f57fff, 23097344 bytes (5639 pages)
avail memory = 19374080 (18MB)
ULE: setup cpu 0
wlan: <802.11 Link Layer>
random: entropy device external interface
mem: <memory>
null: <full device, null device, zero device>
nexus0: <MIPS32 root nexus>
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 180000000 Hz quality 800
Event timer "MIPS32" frequency 180000000 Hz quality 800
random: harvesting attach, 8 bytes (4 bits) from clock0
obio0 at mem 0x10000000-0x1fffffff on nexus0
rt305x_sysctl0: <RT305X System Control driver> at mem 0x10000000-0x100000ff irq 0 on obio0
        Chip ID: "RT5350  "
    SYSCTL_SYSCFG=0x143000
random: harvesting attach, 8 bytes (4 bits) from rt305x_sysctl0
rt305x_ic0: <RT305X Interrupt Controller driver> at mem 0x10000200-0x100002ff on obio0
random: harvesting attach, 8 bytes (4 bits) from rt305x_ic0
uart0: <rt305x_uart> at mem 0x10000500-0x100005ff irq 5 on obio0
uart0: fast interrupt
uart0: PPS capture mode 2 (DCD)
random: harvesting attach, 8 bytes (4 bits) from uart0
spi0: <RT305X SPI> at mem 0x10000b00-0x10000bff on obio0
spibus0: <spibus bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 on spibus0
mx25l0: mx25ll64, sector 65536 bytes, 128 sectors
random: harvesting attach, 8 bytes (4 bits) from mx25l0
random: harvesting attach, 8 bytes (4 bits) from spibus0
random: harvesting attach, 8 bytes (4 bits) from spi0
uart1: <rt305x_uart> at mem 0x10000c00-0x10000cff irq 12 on obio0
uart1: console (115200,n,8,1)
uart1: fast interrupt
uart1: PPS capture mode 2 (DCD)
random: harvesting attach, 8 bytes (4 bits) from uart1
ehci0: <Ralink integrated USB 2.0 controller> at mem 0x101c0000-0x101c0fff irq 18 on obio0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
random: harvesting attach, 8 bytes (4 bits) from usbus0
random: harvesting attach, 8 bytes (4 bits) from ehci0
random: harvesting attach, 8 bytes (4 bits) from obio0
rt0: <Ralink RT5350 onChip Ethernet driver> at mem 0x10100000-0x1010ffff irq 3 on nexus0
rt0: RT5350 Ethernet MAC (rev 0x00000000)
rt0: use hardcoded 00:18:e7:d5:83:90 macaddr
rt0: bpf attached
rt0: Ethernet address: 00:18:e7:d5:83:90
random: harvesting attach, 8 bytes (4 bits) from rt0
random: harvesting attach, 8 bytes (4 bits) from nexus0
Device configuration finished.
Timecounters tick every 10.000 msec
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 512
lo0: bpf attached
WARNING: WITNESS option enabled, expect reduced performance.
md0: Embedded image 4847104 bytes at 0x80328fd0
usbus0: 480Mbps High Speed USB v2.0
Trying to mount root from ufs:/dev/md0 []...
ugen0.1: <Ralink> at usbus0
uhub0: <Ralink EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
GEOM: new disk flash/spi0
Mounting from ufs:/dev/md0 failed with error 22.
Trying to mount root from ufs:md0.uncompress []...
warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
uhub0: 1 port with 1 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub0
random: unblocking device.
*** Populating /var ..
*** Loading configuration files ..
*** Restoring from  ..
dd: no value specified for if
gunzip: (stdin): unexpected end of file
0 blocks
*** Completed.
*** setting up hostname
*** Load kernel modules
  .. bridgestp
kldload: can't load bridgestp: module already loaded or in kernel
  .. if_bridge
kldload: can't load if_bridge: No such file or directory
  .. random
kldload: can't load random: No such file or directory
*** Setting kern.random.harvest.mask=511
kern.random.harvest.mask: 2047 -> 511
*** bringing up loopback ..
*** Default password/login databases ..
*** Starting networking via /etc/rc.d/base/net
*** Interface: rt0: start
*** Interface: rt0: done
*** Interface: bridge0: start
bridge0: bpf attached
bridge0: Ethernet address: ea:8b:e4:ab:99:ec
rt0: entering promiscuous mode
rt0: promiscuous mode enabled
bridge0: link state changed to UP
*** Interface: bridge0: done
*** inetd
*** Done!

FreeBSD/mips (freebsd-wifi) (ttyu1)

login: