API tools faq
paste
Advertisement
Guest User

When did my drives get Hot? - smartctl -x /dev/da0

a guest
Jun 1st, 2016
120
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 6.07 KB | None | 0 0
raw download clone embed print report
  1. ~# smartctl -x /dev/da0
  2. smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p31 amd64] (local build)
  3. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Vendor: TOSHIBA
  7. Product: MG03SCA400
  8. Revision: 0108
  9. User Capacity: 4,000,787,030,016 bytes [4.00 TB]
  10. Logical block size: 512 bytes
  11. Rotation Rate: 7200 rpm
  12. Form Factor: 3.5 inches
  13. Logical Unit id: 0x50000395e8e35c48
  14. Serial number: Y4Q0A097FV94
  15. Device type: disk
  16. Transport protocol: SAS (SPL-3)
  17. Local Time is: Wed Jun 1 12:55:37 2016 BST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20. Temperature Warning: Enabled
  21. Read Cache is: Enabled
  22. Writeback Cache is: Enabled
  23.  
  24. === START OF READ SMART DATA SECTION ===
  25. SMART Health Status: OK
  26.  
  27. Current Drive Temperature: 31 C
  28. Drive Trip Temperature: 65 C
  29.  
  30. Manufactured in week 48 of year 2014
  31. Specified cycle count over device lifetime: 50000
  32. Accumulated start-stop cycles: 24
  33. Specified load-unload count over device lifetime: 600000
  34. Accumulated load-unload cycles: 136
  35. Elements in grown defect list: 0
  36.  
  37. Error counter log:
  38. Errors Corrected by Total Correction Gigabytes Total
  39. ECC rereads/ errors algorithm processed uncorrected
  40. fast | delayed rewrites corrected invocations [10^9 bytes] errors
  41. read: 0 0 0 0 0 1523631.377 0
  42. write: 0 0 0 0 0 8919.648 0
  43.  
  44. Non-medium error count: 61
  45.  
  46. SMART Self-test log
  47. Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
  48. Description number (hours)
  49. # 1 Background short Completed - 9762 - [- - -]
  50. # 2 Background short Completed - 9594 - [- - -]
  51. # 3 Background short Completed - 9450 - [- - -]
  52. # 4 Background short Completed - 9306 - [- - -]
  53. # 5 Background long Completed - 9167 - [- - -]
  54. # 6 Background short Completed - 8874 - [- - -]
  55. # 7 Background short Completed - 8730 - [- - -]
  56. # 8 Background short Completed - 8586 - [- - -]
  57. # 9 Background short Completed - 8443 - [- - -]
  58. #10 Background short Completed - 8299 - [- - -]
  59. #11 Background short Completed - 8131 - [- - -]
  60. #12 Background short Completed - 7987 - [- - -]
  61. #13 Background short Completed - 7700 - [- - -]
  62. #14 Background short Completed - 7555 - [- - -]
  63. #15 Background short Completed - 7436 - [- - -]
  64. #16 Background short Completed - 7292 - [- - -]
  65. #17 Background short Completed - 7148 - [- - -]
  66. #18 Background short Completed - 6859 - [- - -]
  67. #19 Background short Completed - 6691 - [- - -]
  68. #20 Background short Completed - 6548 - [- - -]
  69.  
  70. Long (extended) Self Test duration: 40306 seconds [671.8 minutes]
  71.  
  72. Background scan results log
  73. Status: waiting until BMS interval timer expires
  74. Accumulated power on time, hours:minutes 9775:33 [586533 minutes]
  75. Number of background scans performed: 366, scan progress: 0.00%
  76. Number of background medium scans performed: 0
  77.  
  78. Protocol Specific port log page for SAS SSP
  79. relative target port id = 1
  80. generation code = 2
  81. number of phys = 1
  82. phy identifier = 0
  83. attached device type: expander device
  84. attached reason: SMP phy control function
  85. reason: power on
  86. negotiated logical link rate: phy enabled; 6 Gbps
  87. attached initiator port: ssp=0 stp=0 smp=0
  88. attached target port: ssp=0 stp=0 smp=1
  89. SAS address = 0x50000395e8e35c4a
  90. attached SAS address = 0x5003048001701e3f
  91. attached phy identifier = 12
  92. Invalid DWORD count = 0
  93. Running disparity error count = 0
  94. Loss of DWORD synchronization = 0
  95. Phy reset problem = 0
  96. Phy event descriptors:
  97. Invalid word count: 0
  98. Running disparity error count: 0
  99. Loss of dword synchronization count: 0
  100. Phy reset problem count: 0
  101. Elasticity buffer overflow count: 0
  102. Received abandon-class OPEN_REJECT count: 0
  103. Transmitted BREAK count: 0
  104. Received BREAK count: 0
  105. Transmitted SSP frame error count: 0
  106. Received SSP frame error count: 0
  107. relative target port id = 2
  108. generation code = 2
  109. number of phys = 1
  110. phy identifier = 1
  111. attached device type: expander device
  112. attached reason: SMP phy control function
  113. reason: power on
  114. negotiated logical link rate: phy enabled; 6 Gbps
  115. attached initiator port: ssp=0 stp=0 smp=0
  116. attached target port: ssp=0 stp=0 smp=1
  117. SAS address = 0x50000395e8e35c4b
  118. attached SAS address = 0x5003048001701ebf
  119. attached phy identifier = 12
  120. Invalid DWORD count = 0
  121. Running disparity error count = 0
  122. Loss of DWORD synchronization = 0
  123. Phy reset problem = 0
  124. Phy event descriptors:
  125. Invalid word count: 0
  126. Running disparity error count: 0
  127. Loss of dword synchronization count: 0
  128. Phy reset problem count: 0
  129. Elasticity buffer overflow count: 0
  130. Received abandon-class OPEN_REJECT count: 0
  131. Transmitted BREAK count: 69
  132. Received BREAK count: 0
  133. Transmitted SSP frame error count: 0
  134. Received SSP frame error count: 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!