Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.2.0-24-generic (buildd@vernadsky) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #39-Ubuntu SMP Mon May 21 16:51:22 UTC 2012 (Ubuntu 3.2.0-24.39-generic 3.2.16)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
- [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 0000000017ffd000 (usable)
- [ 0.000000] BIOS-e820: 0000000017ffd000 - 0000000018000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
- [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
- [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] last_pfn = 0x17ffd max_arch_pfn = 0x100000
- [ 0.000000] found SMP MP-table at [c00fdb00] fdb00
- [ 0.000000] init_memory_mapping: 0000000000000000-0000000017ffd000
- [ 0.000000] RAMDISK: 16f54000 - 17fdc000
- [ 0.000000] ACPI: RSDP 000fd9a0 00014 (v00 BOCHS )
- [ 0.000000] ACPI: RSDT 17ffd7b0 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
- [ 0.000000] ACPI: FACP 17ffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
- [ 0.000000] ACPI: DSDT 17ffd9b0 02589 (v01 BXPC BXDSDT 00000001 INTL 20100528)
- [ 0.000000] ACPI: FACS 17ffff40 00040
- [ 0.000000] ACPI: SSDT 17ffd910 0009E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
- [ 0.000000] ACPI: APIC 17ffd830 00072 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
- [ 0.000000] ACPI: HPET 17ffd7f0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
- [ 0.000000] 0MB HIGHMEM available.
- [ 0.000000] 383MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 17ffd000
- [ 0.000000] low ram: 0 - 17ffd000
- [ 0.000000] kvm-clock: Using msrs 12 and 11
- [ 0.000000] kvm-clock: cpu 0, msr 0:18e6341, boot clock
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x00017ffd
- [ 0.000000] HighMem empty
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x00017ffd
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0xb008
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 18000000 (gap: 18000000:e6ffc000)
- [ 0.000000] Booting paravirtualized kernel on KVM
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 13 pages/cpu @d6800000 s31616 r0 d21632 u4194304
- [ 0.000000] kvm-clock: cpu 0, msr 0:16807341, primary cpu clock
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97420
- [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz initrd=/casper/initrd.gz boot=casper console=ttyS0
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 1572560 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
- [ 0.000000] Memory: 360700k/393204k available (5628k kernel code, 32052k reserved, 2771k data, 712k init, 0k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xd87fd000 - 0xff7fe000 ( 624 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xd7ffd000 ( 383 MB)
- [ 0.000000] .init : 0xc1835000 - 0xc18e7000 ( 712 kB)
- [ 0.000000] .data : 0xc157f204 - 0xc1834040 (2771 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc157f204 (5628 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:2304 nr_irqs:256 16
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [ttyS0] enabled
- [ 0.000000] Detected 3314.660 MHz processor.
- [ 0.008000] Calibrating delay loop (skipped) preset value.. 6629.32 BogoMIPS (lpj=13258640)
- [ 0.008000] pid_max: default: 32768 minimum: 301
- [ 0.008000] Security Framework initialized
- [ 0.008000] AppArmor: AppArmor initialized
- [ 0.008000] Yama: becoming mindful.
- [ 0.008000] Mount-cache hash table entries: 512
- [ 0.008000] Initializing cgroup subsys cpuacct
- [ 0.008008] Initializing cgroup subsys memory
- [ 0.008421] Initializing cgroup subsys devices
- [ 0.008826] Initializing cgroup subsys freezer
- [ 0.009235] Initializing cgroup subsys blkio
- [ 0.009634] Initializing cgroup subsys perf_event
- [ 0.010702] SMP alternatives: switching to UP code
- [ 0.033481] Freeing SMP alternatives: 24k freed
- [ 0.033931] ACPI: Core revision 20110623
- [ 0.036967] ftrace: allocating 25955 entries in 51 pages
- [ 0.040121] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.041745] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.042268] CPU0: AMD QEMU Virtual CPU version 0.14.1 stepping 03
- [ 0.044002] APIC calibration not consistent with PM-Timer: 103ms instead of 100ms
- [ 0.044002] APIC delta adjusted to PM-Timer: 6249993 (6499990)
- [ 0.044002] Performance Events: Broken PMU hardware detected, using software events only.
- [ 0.044002] NMI watchdog disabled (cpu0): hardware events not enabled
- [ 0.044002] Brought up 1 CPUs
- [ 0.044002] Total of 1 processors activated (6629.32 BogoMIPS).
- [ 0.044002] devtmpfs: initialized
- [ 0.044002] EVM: security.selinux
- [ 0.044002] EVM: security.SMACK64
- [ 0.044002] EVM: security.capability
- [ 0.044720] print_constraints: dummy:
- [ 0.045102] RTC time: 4:20:00, date: 06/04/12
- [ 0.045515] NET: Registered protocol family 16
- [ 0.045979] EISA bus registered
- [ 0.046297] ACPI: bus type pci registered
- [ 0.046754] PCI: PCI BIOS revision 2.10 entry at 0xfc89d, last bus=0
- [ 0.047301] PCI: Using configuration type 1 for base access
- [ 0.048665] bio: create slab <bio-0> at 0
- [ 0.049231] ACPI: Added _OSI(Module Device)
- [ 0.049599] ACPI: Added _OSI(Processor Device)
- [ 0.049987] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.050396] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.052758] ACPI: Interpreter enabled
- [ 0.053089] ACPI: (supports S0 S3 S4 S5)
- [ 0.053481] ACPI: Using IOAPIC for interrupt routing
- [ 0.056403] ACPI: No dock devices found.
- [ 0.056752] HEST: Table not found.
- [ 0.057053] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- [ 0.057883] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.059450] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
- [ 0.060012] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
- [ 0.071606] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
- [ 0.073773] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
- [ 0.074366] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
- [ 0.074951] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
- [ 0.076193] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
- [ 0.076806] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
- [ 0.077481] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.078177] vgaarb: loaded
- [ 0.078417] vgaarb: bridge control possible 0000:00:02.0
- [ 0.078973] i2c-core: driver [aat2870] using legacy suspend method
- [ 0.079509] i2c-core: driver [aat2870] using legacy resume method
- [ 0.080125] SCSI subsystem initialized
- [ 0.080599] usbcore: registered new interface driver usbfs
- [ 0.081095] usbcore: registered new interface driver hub
- [ 0.081581] usbcore: registered new device driver usb
- [ 0.082199] PCI: Using ACPI for IRQ routing
- [ 0.082766] NetLabel: Initializing
- [ 0.083073] NetLabel: domain hash size = 128
- [ 0.083457] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.084016] NetLabel: unlabeled traffic allowed by default
- [ 0.084584] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.085223] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.085691] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
- [ 0.092055] Switching to clocksource kvm-clock
- [ 0.097924] AppArmor: AppArmor Filesystem Enabled
- [ 0.098377] pnp: PnP ACPI init
- [ 0.098652] ACPI: bus type pnp registered
- [ 0.099607] pnp: PnP ACPI: found 8 devices
- [ 0.099998] ACPI: ACPI bus type pnp unregistered
- [ 0.100416] PnPBIOS: Disabled
- [ 0.136544] NET: Registered protocol family 2
- [ 0.136991] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.137735] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.138481] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.139177] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.139761] TCP reno registered
- [ 0.140080] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.140594] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.141189] NET: Registered protocol family 1
- [ 0.141579] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
- [ 0.142097] pci 0000:00:01.0: PIIX3: Enabling Passive Release
- [ 0.142602] pci 0000:00:01.0: Activating ISA DMA hang workarounds
- [ 0.143358] audit: initializing netlink socket (disabled)
- [ 0.143845] type=2000 audit(1338783602.140:1): initialized
- [ 0.159367] Trying to unpack rootfs image as initramfs...
- [ 0.181681] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.189302] VFS: Disk quotas dquot_6.5.2
- [ 0.189710] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.190718] fuse init (API version 7.17)
- [ 0.191128] msgmni has been set to 704
- [ 0.200240] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.204036] io scheduler noop registered
- [ 0.204386] io scheduler deadline registered
- [ 0.204757] io scheduler cfq registered (default)
- [ 0.205235] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.205750] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.206424] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
- [ 0.207213] ACPI: Power Button [PWRF]
- [ 0.208232] ERST: Table is not found!
- [ 0.208558] GHES: HEST is not enabled!
- [ 0.212147] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 0.233627] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.234184] isapnp: Scanning for PnP cards...
- [ 0.325765] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.391947] Linux agpgart interface v0.103
- [ 0.396869] brd: module loaded
- [ 0.397692] loop: module loaded
- [ 0.404145] scsi0 : ata_piix
- [ 0.404494] scsi1 : ata_piix
- [ 0.404778] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc100 irq 14
- [ 0.405360] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc108 irq 15
- [ 0.406216] Fixed MDIO Bus: probed
- [ 0.406529] tun: Universal TUN/TAP device driver, 1.6
- [ 0.406961] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.407715] PPP generic driver version 2.4.2
- [ 0.408183] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.408756] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.409292] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.409863] usbcore: registered new interface driver libusual
- [ 0.410389] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
- [ 0.411571] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.416124] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.416677] mousedev: PS/2 mouse device common for all mice
- [ 0.417353] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
- [ 0.418272] rtc_cmos 00:01: RTC can wake from S4
- [ 0.418782] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
- [ 0.419377] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
- [ 0.419992] device-mapper: uevent: version 1.0.3
- [ 0.420471] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 0.421218] EISA: Probing bus 0 at eisa.0
- [ 0.421623] EISA: Detected 0 cards.
- [ 0.421935] cpufreq-nforce2: No nForce2 chipset.
- [ 0.422336] cpuidle: using governor ladder
- [ 0.422692] cpuidle: using governor menu
- [ 0.423033] EFI Variables Facility v0.08 2004-May-17
- [ 0.423598] TCP cubic registered
- [ 0.423992] NET: Registered protocol family 10
- [ 0.428626] NET: Registered protocol family 17
- [ 0.429041] Registering the dns_resolver key type
- [ 0.429457] Using IPI No-Shortcut mode
- [ 0.432106] registered taskstats version 1
- [ 0.588462] ata2.00: ATAPI: QEMU DVD-ROM, 0.14.1, max UDMA/100
- [ 0.589302] ata2.00: configured for MWDMA2
- [ 0.871971] isapnp: No Plug & Play device found
- [ 0.872689] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.14 PQ: 0 ANSI: 5
- [ 0.873710] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
- [ 0.874863] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 0.875574] sr 1:0:0:0: Attached scsi generic sg0 type 5
- [ 0.893753] Freeing initrd memory: 16928k freed
- [ 0.902236] Magic number: 0:990:311
- [ 0.902677] rtc_cmos 00:01: setting system clock to 2012-06-04 04:20:01 UTC (1338783601)
- [ 0.903360] powernow-k8: Processor cpuid 633 not supported
- [ 0.903844] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.904500] EDD information not available.
- [ 0.905125] Freeing unused kernel memory: 712k freed
- [ 0.905850] Write protecting the kernel text: 5632k
- [ 0.906312] Write protecting the kernel read-only data: 2324k
- Loading, please wait...
- [ 0.919663] zram: module is from the staging directory, the quality is unknown, you have been warned.
- [ 0.920734] zram: num_devices not specified. Using default: 1
- [ 0.921237] zram: Creating 1 devices ...
- [ 0.924896] udevd[92]: starting version 175
- [ 1.018706] Adding 189180k swap on /dev/zram0. Priority:100 extents:1 across:189180k SS
- [ 1.047900] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- [ 1.048724] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
- [ 1.049241] 8139cp 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
- [ 1.051790] 8139cp 0000:00:03.0: eth0: RTL-8139C+ at 0xd8812000, 52:54:00:12:34:56, IRQ 11
- [ 1.056373] FDC 0 is a S82078B
- [ 1.072849] 8139too: 8139too Fast Ethernet driver 0.9.28
- [ 1.140055] Refined TSC clocksource calibration: 3314.662 MHz.
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/casper-premount ... [ 2.293195] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 2.298503] aufs 3.2-20120109
- done.
- done.
- done.
- Begin: Creating debconf-communicate fifo mechanism ... done.
- Begin: Running /scripts/casper-bottom ... Begin: Moving mount points... ... done.
- Begin: Configuring fstab... ... done.
- Begin: Setting up swap... ... done.
- Begin: Setting up locales... ... Generating locales...
- en_US.UTF-8... done
- Generation complete.
- done.
- Begin: Setting up automatic login... ... done.
- Begin: Setting hostname... ... done.
- Begin: Setting up console keyboard... ... done.
- Begin: Configuring gnome-panel-data... ... done.
- Begin: Configuring screensaver... ... done.
- Begin: Regenerating SSL certificate... ... done.
- Begin: Preconfiguring /etc/modules... ... done.
- Begin: Preconfiguring networking... ... done.
- Begin: Loading preseed file... ... done.
- Begin: Adding live session user... ... done.
- Begin: Setting up init... ... done.
- Begin: Disabling user menu... ... done.
- Begin: Configuring accessibility options... ... done.
- Begin: Disabling update-notifier... ... done.
- Begin: Configuring power management... ... done.
- Begin: Enabling detection of crashes... ... done.
- Begin: Disabling unnecessary KDE services... ... done.
- Begin: Fixing language selector... ... /usr/lib/python2.7/dist-packages/LanguageSelector/LocaleInfo.py:256: UserWarning: Failed to connect to socket /var/run/dbus/system_bus_socket: Connection refused
- warnings.warn(msg.args[0].encode('UTF-8'))
- done.
- Begin: Disabling trackerd... ... done.
- Begin: Adding APT-CDROM source... ... Using CD-ROM mount point /cdrom/
- Identifying.. [b14b28392920a91a6150cc3259742ccf-2]
- Scanning disc for index files..
- Found 0 package indexes, 0 source indexes, 0 translation indexes and 0 signatures
- E: Unable to locate any package files, perhaps this is not a Debian Disc or the wrong architecture?
- done.
- Begin: Possibly disabling update-initramfs (useless on a live CD)... ... done.
- Begin: Grant administrative PolicyKit privileges to default user... ... done.
- Begin: Configuring jackd2... ... done.
- done.
- done.
- Begin: Running /scripts/init-bottom ... done.
- [ 7.220134] udevd[789]: starting version 175
- * Starting mDNS/DNS-SD daemon[74G[ OK ]
- * Starting bluetooth daemon[74G[ OK ]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement