API tools faq
paste
Advertisement
Guest User

Buffalo WZR-600DHP2 OpenWRT TFTP-recovery bootlog - Francis

a guest
Jul 9th, 2015
963
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 22.01 KB | None | 0 0
raw download clone embed print report
  1. Decompressing...done
  2. Found a Esmt NAND flash:
  3. Total size: 128MB
  4. Block size: 128KB
  5. Page Size: 2048B
  6. OOB Size: 64B
  7. Sector size: 512B
  8. Spare size: 16B
  9. ECC level: 8-bit
  10. Device ID: 0x92 0xf1 0x80 0x95 0x40
  11.  
  12.  
  13. CFE version 6.30.163.42 (r396477) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
  14. Build Date: Wed Apr 2 15:17:43 CEST 2014 (root@dd-wrt.buildserver)
  15. Copyright (C) 2000-2008 Broadcom Corporation.
  16.  
  17. Init Arena
  18. Init Devs.
  19. Boot partition size = 524288(0x80000)
  20. DDR Clock: 533 MHz
  21. Info: DDR frequency set from clkfreq=800,*533*
  22. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.42 (r396477)
  23. CPU type 0x0: 800MHz
  24. Tot mem: 262144 KBytes
  25.  
  26. CFE mem: 0x00F00000 - 0x010A3C38 (1719352)
  27. Data: 0x00F5BEBC - 0x00F5C390 (1236)
  28. BSS: 0x00F5C3A0 - 0x00FA1C38 (284824)
  29. Heap: 0x00FA1C38 - 0x010A1C38 (1048576)
  30. Stack: 0x010A1C38 - 0x010A3C38 (8192)
  31. Text: 0x00F00000 - 0x00F4EE60 (323168)
  32. Boot: 0x010A4000 - 0x010E4000
  33. Reloc: I:00000000 - D:00000000
  34.  
  35.  
  36. Copying boot params from address 0x1c080000.....
  37. DONE
  38.  
  39.  
  40. Bootloader version v0.03 boot_version v0.03
  41. Project name : WG9116H22
  42. Press CTRL+C to cancel startup...
  43. Device eth0: hwaddr XX-XX-XX-XX-XX-XX, ipaddr 192.168.1.1, mask 255.255.255.0
  44. gateway not set, nameserver not set
  45. Invalid boot block on disk
  46. Invalid boot block on disk
  47. Reading 192.168.1.2:linux.trx-recovery: Done. 7864320 bytes read
  48. Programming...done. 7864320 bytes written
  49. Invalid boot block on disk
  50. nflash1.trx CRC check failed!
  51. Changed to the other image 1
  52. Loader:raw Filesys:raw Dev:nflash0.os2 File: Options:(null)
  53. Loading: .. 1411961 bytes read
  54. Entry at 0x00008000
  55. Closing network.
  56. Starting program at 0x00008000
  57. Uncompressing Linux... done, booting the kernel.
  58. [ 0.000000] Booting Linux on physical CPU 0x0
  59. [ 0.000000] Linux version 3.18.14 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r45872) ) #1 SMP Mon Jun 8 16:13:19 CEST 2015
  60. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  61. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  62. [ 0.000000] Machine model: Buffalo WZR-600DHP2 (BCM47081)
  63. [ 0.000000] bootconsole [earlycon0] enabled
  64. [ 0.000000] Memory policy: Data cache writealloc
  65. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c6ddd000 s5952 r8192 d22720 u36864
  66. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65280
  67. [ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk
  68. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  69. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  70. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  71. [ 0.000000] Memory: 255604K/262144K available (2890K kernel code, 106K rwdata, 788K rodata, 176K init, 276K bss, 6540K reserved, 131072K highmem)
  72. [ 0.000000] Virtual kernel memory layout:
  73. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  74. [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
  75. [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
  76. [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
  77. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  78. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  79. [ 0.000000] .text : 0xc0008000 - 0xc039fdc4 (3680 kB)
  80. [ 0.000000] .init : 0xc03a0000 - 0xc03cc000 ( 176 kB)
  81. [ 0.000000] .data : 0xc03cc000 - 0xc03e69f8 ( 107 kB)
  82. [ 0.000000] .bss : 0xc03e69f8 - 0xc042bb4c ( 277 kB)
  83. [ 0.000000] Hierarchical RCU implementation.
  84. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  85. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
  86. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  87. [ 0.000000] L2C: platform modifies aux control register: 0x0a130000 -> 0x7a530001
  88. [ 0.000000] L2C: platform provided aux values permit register corruption.
  89. [ 0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x7a530001
  90. [ 0.000000] L2C-310 erratum 769419 enabled
  91. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  92. [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9
  93. [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
  94. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  95. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
  96. [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
  97. [ 0.000015] sched_clock: 64 bits at 400MHz, resolution 2ns, wraps every 2748779069440ns
  98. [ 0.008546] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
  99. [ 0.101321] pid_max: default: 32768 minimum: 301
  100. [ 0.106285] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  101. [ 0.113154] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  102. [ 0.120962] CPU: Testing write buffer coherency: ok
  103. [ 0.126296] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  104. [ 0.132249] Setting up static identity map for 0x11a60 - 0x11a94
  105. [ 0.139413] Brought up 1 CPUs
  106. [ 0.142545] SMP: Total of 1 processors activated (1594.16 BogoMIPS).
  107. [ 0.149156] CPU: All CPU(s) started in SVC mode.
  108. [ 0.161594] NET: Registered protocol family 16
  109. [ 0.166915] DMA: preallocated 256 KiB pool for atomic coherent allocations
  110. [ 0.180912] Switched to clocksource arm_global_timer
  111. [ 0.187215] NET: Registered protocol family 2
  112. [ 0.192569] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  113. [ 0.199819] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
  114. [ 0.206416] TCP: Hash tables configured (established 1024 bind 1024)
  115. [ 0.213074] TCP: reno registered
  116. [ 0.216463] UDP hash table entries: 256 (order: 1, 8192 bytes)
  117. [ 0.222547] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  118. [ 0.229274] NET: Registered protocol family 1
  119. [ 0.234754] futex hash table entries: 256 (order: 2, 16384 bytes)
  120. [ 0.242617] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  121. [ 0.248768] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  122. [ 0.259393] msgmni has been set to 243
  123. [ 0.264256] bounce: pool size: 64 pages
  124. [ 0.268288] io scheduler noop registered
  125. [ 0.272445] io scheduler deadline registered (default)
  126. [ 0.278098] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  127. [ 0.286819] console [ttyS0] disabled
  128. [ 0.290646] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 117, base_baud = 6250000) is a 16550
  129. [ 0.299854] console [ttyS0] enabled
  130. [ 0.299854] console [ttyS0] enabled
  131. [ 0.306969] bootconsole [earlycon0] disabled
  132. [ 0.306969] bootconsole [earlycon0] disabled
  133. [ 0.315989] 18000400.serial: ttyS1 at MMIO 0x18000400 (irq = 117, base_baud = 6250000) is a 16550
  134. [ 0.325921] spi_gpio spi: gpio-sck property not found
  135. [ 0.331011] platform spi: Driver spi_gpio requests probe deferral
  136. [ 0.337429] libphy: Fixed MDIO Bus: probed
  137. [ 0.341616] bgmac: Broadcom 47xx GBit MAC driver loaded
  138. [ 0.346997] bcma: bus0: Found chip with id 53010, rev 0x00 and package 0x02
  139. [ 0.354011] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
  140. [ 0.362594] bcma: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x01, class 0x0)
  141. [ 0.371350] bcma: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x01, class 0x0)
  142. [ 0.379300] bcma: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
  143. [ 0.387667] bcma: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
  144. [ 0.396051] bcma: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
  145. [ 0.404434] bcma: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
  146. [ 0.412786] bcma: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
  147. [ 0.421318] bcma: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
  148. [ 0.429860] bcma: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
  149. [ 0.438434] bcma: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x01, class 0x0)
  150. [ 0.448446] bcma: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x01, class 0x0)
  151. [ 0.456807] bcma: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x01, class 0x0)
  152. [ 0.465205] bcma: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
  153. [ 0.473434] bcma: bus0: Core 14 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
  154. [ 0.482786] bcma: bus0: Core 15 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
  155. [ 0.493518] bcma: bus0: Core 16 found: ROM (manuf 0x4BF, id 0x508, rev 0x01, class 0x0)
  156. [ 0.501555] bcma: bus0: Core 17 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
  157. [ 0.511162] bcma: bus0: Core 18 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
  158. [ 0.538453] bcm_nand bcma0:17: NAND Controller rev 6.01
  159. [ 0.568463] nand: device found, Manufacturer ID: 0x92, Chip ID: 0xf1
  160. [ 0.574794] nand: Eon NAND 128MiB 3,3V 8-bit
  161. [ 0.579073] nand: 128MiB, SLC, page size: 2048, OOB size: 64
  162. [ 1.765469] random: nonblocking pool is initialized
  163. [ 1.966887] 5 bcm47xxpart partitions found on MTD device bcm_nand
  164. [ 1.972962] Creating 5 MTD partitions on "bcm_nand":
  165. [ 1.977910] 0x000000000000-0x0000000a0000 : "boot"
  166. [ 1.984149] 0x0000000a0000-0x000002100000 : "nvram"
  167. [ 2.026569] 0x000002100000-0x000008000000 : "firmware"
  168. [ 2.139700] 0x00000210001c-0x000002500000 : "linux"
  169. [ 2.150030] 0x000002500000-0x000008000000 : "ubi"
  170. [ 2.259219] bcm53xxspiflash spi32766.0: unrecognized JEDEC id bytes: ff, ff, ff
  171. [ 2.266514] bcm53xxspiflash: probe of spi32766.0 failed with error -2
  172. [ 2.278473] can not parse nvram name (null)boardnum(null) with value 2013083001 got -34
  173. [ 2.292850] bgmac bcma0:3: Found PHY addr: 30 (NOREGS)
  174. [ 2.298318] bgmac bcma0:3: Support for Roboswitch not implemented
  175. [ 2.306149] b53_common: found switch: BCM53011, rev 5
  176. [ 2.311945] bgmac bcma0:4: Invalid MAC addr: 00:00:00:00:00:00
  177. [ 2.317781] bgmac bcma0:4: Using random MAC: a2:98:f2:d0:5c:01
  178. [ 2.323675] bgmac bcma0:4: Found PHY addr: 0
  179. [ 2.329318] bgmac: Timeout waiting for reg 0x180
  180. [ 2.333919] bgmac bcma0:4: Writing to PHY 0 register 0x0 failed
  181. [ 2.340944] bgmac: Timeout waiting for reg 0x180
  182. [ 2.345538] bgmac bcma0:4: Reading PHY 0 register 0x0 failed
  183. [ 2.351177] bgmac bcma0:4: PHY reset failed
  184. [ 2.355343] bgmac bcma0:4: Support for Roboswitch not implemented
  185. [ 2.362960] bgmac bcma0:5: Invalid MAC addr: 00:00:00:00:00:00
  186. [ 2.368880] bgmac bcma0:5: Using random MAC: fe:8e:52:0c:05:4d
  187. [ 2.374744] bgmac bcma0:5: Found PHY addr: 0
  188. [ 2.380403] bgmac: Timeout waiting for reg 0x180
  189. [ 2.385007] bgmac bcma0:5: Writing to PHY 0 register 0x0 failed
  190. [ 2.392056] bgmac: Timeout waiting for reg 0x180
  191. [ 2.396653] bgmac bcma0:5: Reading PHY 0 register 0x0 failed
  192. [ 2.402300] bgmac bcma0:5: PHY reset failed
  193. [ 2.406466] bgmac bcma0:5: Support for Roboswitch not implemented
  194. [ 2.413955] bgmac: Unsupported core_unit 3
  195. [ 2.418057] bgmac: probe of bcma0:6 failed with error -524
  196. [ 2.423685] pci_host_bcm5301x bcma0:7: initializing PCIe controller
  197. [ 2.698396] pci_host_bcm5301x bcma0:7: link: UP
  198. [ 2.703062] pci_host_bcm5301x bcma0:7: PCI host bridge to bus 0000:00
  199. [ 2.709503] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
  200. [ 2.716351] pci_bus 0000:00: root bus resource [io 0x0000]
  201. [ 2.721906] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  202. [ 2.730084] PCI: bus0: Fast back to back transfers disabled
  203. [ 2.736098] PCI: bus1: Fast back to back transfers disabled
  204. [ 2.741803] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
  205. [ 2.748578] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x08003fff 64bit]
  206. [ 2.755863] pci 0000:00:00.0: PCI bridge to [bus 01]
  207. [ 2.760817] pci 0000:00:00.0: bridge window [mem 0x08000000-0x080fffff]
  208. [ 2.767732] pci_host_bcm5301x bcma0:8: initializing PCIe controller
  209. [ 3.048477] pci_host_bcm5301x bcma0:8: link: UP
  210. [ 3.053148] pci_host_bcm5301x bcma0:8: PCI host bridge to bus 0001:00
  211. [ 3.059592] pci_bus 0001:00: root bus resource [mem 0x40000000-0x47ffffff]
  212. [ 3.066435] pci_bus 0001:00: root bus resource [io 0x0000]
  213. [ 3.071990] pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
  214. [ 3.080150] PCI: bus0: Fast back to back transfers disabled
  215. [ 3.086137] PCI: bus1: Fast back to back transfers disabled
  216. [ 3.091888] pci 0001:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
  217. [ 3.098660] pci 0001:01:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit]
  218. [ 3.105947] pci 0001:00:00.0: PCI bridge to [bus 01]
  219. [ 3.110899] pci 0001:00:00.0: bridge window [mem 0x40000000-0x400fffff]
  220. [ 3.117799] pci_host_bcm5301x bcma0:9: initializing PCIe controller
  221. [ 3.508390] pci_host_bcm5301x bcma0:9: link: DOWN
  222. [ 3.514200] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
  223. [ 3.523168] bcma: bus0: Bus registered
  224. [ 3.527032] bcma-pci-bridge 0000:01:00.0: enabling device (0140 -> 0142)
  225. [ 3.533762] bcma: bus1: Found chip with id 43228, rev 0x00 and package 0x08
  226. [ 3.540728] bcma: bus1: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
  227. [ 3.549240] bcma: bus1: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
  228. [ 3.557842] bcma: bus1: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x12, class 0x0)
  229. [ 3.565835] bcma: bus1: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, rev 0x07, class 0x0)
  230. [ 3.578674] can not parse nvram name 1:ag2(null) with value ff got -22
  231. [ 3.585190] can not parse nvram name 1:ag3(null) with value ff got -22
  232. [ 3.638663] bcma: bus1: Bus registered
  233. [ 3.642475] bcma-pci-bridge 0001:01:00.0: enabling device (0140 -> 0142)
  234. [ 3.649230] bcma: bus2: Found chip with id 43217, rev 0x00 and package 0x08
  235. [ 3.656190] bcma: bus2: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x27, class 0x0)
  236. [ 3.664716] bcma: bus2: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
  237. [ 3.673333] bcma: bus2: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x14, class 0x0)
  238. [ 3.685763] can not parse nvram name 0:ag2(null) with value 255 got -34
  239. [ 3.748583] bcma: bus2: Bus registered
  240. [ 3.752658] TCP: cubic registered
  241. [ 3.755975] NET: Registered protocol family 17
  242. [ 3.760521] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  243. [ 3.773126] Bridge firewalling registered
  244. [ 3.777123] 8021q: 802.1Q VLAN Support v1.8
  245. [ 3.781391] Registering SWP/SWPB emulation handler
  246. [ 3.788159] spi_gpio spi: gpio-miso property not found, switching to no-rx mode
  247. [ 3.797665] UBI: auto-attach mtd4
  248. [ 3.801018] UBI: attaching mtd4 to ubi0
  249. [ 4.451444] UBI: scanning is finished
  250. [ 4.494924] UBI: volume 1 ("rootfs_data") re-sized from 9 to 679 LEBs
  251. [ 4.502118] UBI: attached mtd4 (name "ubi", size 91 MiB) to ubi0
  252. [ 4.508102] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  253. [ 4.514910] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  254. [ 4.521593] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
  255. [ 4.528439] UBI: good PEBs: 727, bad PEBs: 1, corrupted PEBs: 0
  256. [ 4.534333] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128
  257. [ 4.541445] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 711265446
  258. [ 4.550366] UBI: available PEBs: 0, total reserved PEBs: 727, PEBs reserved for bad PEB handling: 19
  259. [ 4.559525] UBI: background thread "ubi_bgt0d" started, PID 253
  260. [ 4.566703] UBI: ubiblock0_0 created from ubi0:0(rootfs)
  261. [ 4.572038] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
  262. [ 4.608529] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  263. [ 4.615857] Freeing unused kernel memory: 176K (c03a0000 - c03cc000)
  264. [ 4.972905] External imprecise Data abort at addr=0xb6fa9005, fsr=0x1c06 ignored.
  265. [ 5.355419] init: Console is alive
  266. [ 5.359399] init: - watchdog -
  267. [ 6.117696] usbcore: registered new interface driver usbfs
  268. [ 6.123331] usbcore: registered new interface driver hub
  269. [ 6.128716] usbcore: registered new device driver usb
  270. [ 6.378688] init: - preinit -
  271. Press the [f] key and hit [enter] to enter failsafe mode
  272. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  273. [ 8.348409] eth0: Link is Up - 1Gbps/Full - flow control off
  274. [ 9.863403] UBIFS: default file-system created
  275. [ 9.869491] UBIFS: background thread "ubifs_bgt0_1" started, PID 331
  276. [ 10.012664] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
  277. [ 10.019151] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  278. [ 10.028245] UBIFS: FS size: 84819968 bytes (80 MiB, 668 LEBs), journal size 4190208 bytes (3 MiB, 33 LEBs)
  279. [ 10.037860] UBIFS: reserved for root: 4006256 bytes (3912 KiB)
  280. [ 10.043678] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 473E2C37-071B-4FBE-A3B5-394358E17E3E, small LPT model
  281. [ 10.057231] mount_root: overlay filesystem has not been fully initialized yet
  282. [ 10.064861] mount_root: switching to jffs2 overlay
  283. [ 10.086947] procd: - early -
  284. [ 10.090408] procd: - watchdog -
  285. [ 10.718749] procd: - ubus -
  286. [ 11.749395] procd: - init -
  287. Please press Enter to activate this console.
  288. ^@^@^@[ 97.234145] NET: Registered protocol family 10
  289. [ 97.242872] ip6_tables: (C) 2000-2006 Netfilter Core Team
  290. [ 97.254582] Loading modules backported from Linux version master-2015-03-09-0-g141f155
  291. [ 97.262557] Backport generated by backports.git backports-20150129-0-gdd4a670
  292. [ 97.272328] ip_tables: (C) 2000-2006 Netfilter Core Team
  293. [ 97.282811] nf_conntrack version 0.5.0 (3996 buckets, 15984 max)
  294. [ 97.312363] xt_time: kernel timezone is -0000
  295. [ 97.324666] cfg80211: Calling CRDA to update world regulatory domain
  296. [ 97.338848] cfg80211: World regulatory domain updated:
  297. [ 97.343979] cfg80211: DFS Master region: unset
  298. [ 97.348316] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  299. [ 97.358056] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  300. [ 97.366038] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  301. [ 97.374010] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  302. [ 97.381985] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  303. [ 97.389962] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  304. [ 97.399404] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  305. [ 97.407457] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  306. [ 97.415430] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  307. [ 97.454058] PPP generic driver version 2.4.2
  308. [ 97.459941] NET: Registered protocol family 24
  309. [ 97.472401] b43-phy0: Broadcom 43228 WLAN found (core revision 30)
  310. [ 97.488511] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 16
  311. [ 97.494678] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1
  312. [ 97.508785] b43-phy1: Broadcom 43217 WLAN found (core revision 30)
  313. [ 97.528570] b43-phy1: Found PHY: Analog 9, Type 4 (N), Revision 17
  314. [ 97.534757] b43-phy1: Found Radio: Manuf 0x17F, ID 0x2057, Revision 14, Version 1
  315. [ 97.548709] Broadcom 43xx driver loaded [ Features: PNL ]
  316. [ 97.559817] usbcore: registered new interface driver brcmfmac
  317. [ 127.681593] device eth0.1 entered promiscuous mode
  318. [ 127.686373] device eth0 entered promiscuous mode
  319. [ 127.715362] br-lan: port 1(eth0.1) entered forwarding state
  320. [ 127.720995] br-lan: port 1(eth0.1) entered forwarding state
  321. [ 128.518532] eth0: Link is Up - 1Gbps/Full - flow control off
  322. [ 129.718417] br-lan: port 1(eth0.1) entered forwarding state
  323. [ 276.028476] b43-phy1: Loading firmware version 666.2 (2011-02-23 01:15:07)
  324. [ 276.210500] b43-phy1 ERROR: No 2GHz EPA gain table available for this device
  325. [ 276.228957] b43-phy1 ERROR: No 2GHz EPA gain table available for this device
  326. [ 276.469475] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  327. [ 276.648487] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
  328. [ 276.830441] b43-phy0 ERROR: No 5GHz EPA gain table available for this device
  329. [ 276.848950] b43-phy0 ERROR: No 5GHz EPA gain table available for this device
  330. [ 277.089480] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  331. [ 277.096353] device wlan1 entered promiscuous mode
  332. [ 277.103515] device wlan0 entered promiscuous mode
  333. [ 277.168748] br-lan: port 3(wlan0) entered forwarding state
  334. [ 277.174282] br-lan: port 3(wlan0) entered forwarding state
  335. [ 277.179892] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  336. [ 277.249009] br-lan: port 2(wlan1) entered forwarding state
  337. [ 277.254555] br-lan: port 2(wlan1) entered forwarding state
  338. [ 277.260152] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
  339. [ 279.168461] br-lan: port 3(wlan0) entered forwarding state
  340. [ 279.248458] br-lan: port 2(wlan1) entered forwarding state
  341. [ 317.229311] device wlan0 left promiscuous mode
  342. [ 317.233853] br-lan: port 3(wlan0) entered disabled state
  343. [ 317.818503] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
  344. [ 318.000456] b43-phy0 ERROR: No 5GHz EPA gain table available for this device
  345. [ 318.018999] b43-phy0 ERROR: No 5GHz EPA gain table available for this device
  346. [ 318.259486] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  347. [ 318.268214] device wlan0 entered promiscuous mode
  348. [ 318.273067] br-lan: port 3(wlan0) entered forwarding state
  349. [ 318.278573] br-lan: port 3(wlan0) entered forwarding state
  350. [ 318.348936] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  351. [ 320.278465] br-lan: port 3(wlan0) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!