API tools faq
paste
Guest User

Kernel Panic 3

a guest
Feb 12th, 2013
103
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 188.23 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.4.0-franco.Kernel-nightly (francisco@francisco) (gcc version 4.7 (GCC) ) #72 SMP PREEMPT Tue Feb 12 00:29:06 PST 2013
  4. [ 0.000000] CPU: ARMv7 Processor [510f06f2] revision 2 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  6. [ 0.000000] Machine: QCT APQ8064 MAKO
  7. [ 0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
  8. [ 0.000000] memory pool 3 (start fe9ff000 size 1600000) initialized
  9. [ 0.000000] Initialized persistent memory from 88700000-887fffff
  10. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  11. [ 0.000000] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat_ver=65536
  12. [ 0.000000] accessory_chip=0 hw_plat_subtype=1
  13. [ 0.000000] allocating 21626880 bytes at c2767000 (82967000 physical) for fb
  14. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c3c0a000 s11264 r8192 d13312 u32768
  15. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 488963
  16. [ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=mako lpj=67677 uart_console=enable lcd_maker_id=primary lge.hreset=off lge.reset=mode_reset gpt=enable lge.kcal=0|0|0|x lge.rev=rev_10 mdm_force_dump_enabled androidboot.emmc=true androidboot.serialno=00411998991790db androidboot.bootloader=MAKOZ10l androidboot.baseband=mdm bootreason=reboot
  17. [ 0.000000] UART CONSOLE : enable
  18. [ 0.000000] kcal is 0|0|0|x
  19. [ 0.000000] kcal not calibrated yet : 120
  20. [ 0.000000] set to default : 255
  21. [ 0.000000] BOARD : LGE input rev_10
  22. [ 0.000000] BOARD : LGE matched rev_10
  23. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  24. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  25. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  26. [ 0.000000] Memory: 134MB 74MB 7MB 1MB 253MB 1456MB = 1925MB total
  27. [ 0.000000] Memory: 1914880k/1997824k available, 57340k reserved, 1286140K highmem
  28. [ 0.000000] Virtual kernel memory layout:
  29. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  30. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  31. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  32. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  33. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  34. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  35. [ 0.000000] .text : 0xc0008000 - 0xc0bdd000 (12116 kB)
  36. [ 0.000000] .init : 0xc0c00000 - 0xc0d02c00 (1035 kB)
  37. [ 0.000000] .data : 0xc0d04000 - 0xc0d68840 ( 403 kB)
  38. [ 0.000000] .bss : 0xc0e241b4 - 0xc10382cc (2129 kB)
  39. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  40. [ 0.000000] Preemptible hierarchical RCU implementation.
  41. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  42. [ 0.000000] NR_IRQS:921
  43. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
  44. [ 0.000000] Console: colour dummy device 80x30
  45. [ 0.000183] Calibrating delay loop (skipped) preset value.. 13.53 BogoMIPS (lpj=67677)
  46. [ 0.000213] pid_max: default: 32768 minimum: 301
  47. [ 0.000518] Mount-cache hash table entries: 512
  48. [ 0.001678] Initializing cgroup subsys cpuacct
  49. [ 0.001678] Initializing cgroup subsys freezer
  50. [ 0.001800] CPU: Testing write buffer coherency: ok
  51. [ 0.002075] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  52. [ 0.002105] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  53. [ 0.002197] Setting up static identity map for 0x80a9e000 - 0x80a9e088
  54. [ 0.006043] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  55. [ 0.008759] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  56. [ 0.011506] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  57. [ 0.011658] Brought up 4 CPUs
  58. [ 0.011658] SMP: Total of 4 processors activated (54.14 BogoMIPS).
  59. [ 0.028383] dummy:
  60. [ 0.028780] NET: Registered protocol family 16
  61. [ 0.029787] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  62. [ 0.032504] meminfo_init: smem ram ptable found: ver: 0 len: 6
  63. [ 0.032534] Found 2 memory banks grouped into 16 memory regions
  64. [ 0.032717] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
  65. [ 0.033358] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat_ver=65536
  66. [ 0.033358] accessory_chip=0 hw_plat_subtype=1
  67. [ 0.033389] msm_rpm_init: RPM firmware 3.0.16842886
  68. [ 0.052006] msm_rpm_get_status(): Status id 341 not defined for target
  69. [ 0.052006] msm_rpm_get_status(): Status id 341 not defined for target
  70. [ 0.052037] msm_rpm_get_status(): Status id 341 not defined for target
  71. [ 0.052037] msm_rpm_get_status(): Status id 341 not defined for target
  72. [ 0.052067] msm_rpm_get_status(): Status id 341 not defined for target
  73. [ 0.052067] msm_rpm_get_status(): Status id 341 not defined for target
  74. [ 0.052098] msm_rpm_get_status(): Status id 341 not defined for target
  75. [ 0.052098] msm_rpm_get_status(): Status id 341 not defined for target
  76. [ 0.053502] pm8921_probe: PMIC revision 1: F4
  77. [ 0.053532] pm8921_probe: PMIC revision 2: 06
  78. [ 0.053532] pm8921_probe: PMIC version: PM8921 rev 3.0
  79. [ 0.053563] pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)
  80. [ 0.054692] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
  81. [ 0.055241] pm_gpio_probe: OK: base=152, ngpio=44
  82. [ 0.055516] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
  83. [ 0.055608] pm8xxx_mpp_probe: OK: base=196, ngpio=12
  84. [ 0.057622] pm8821_probe: PMIC revision 1: PM8821 rev F3
  85. [ 0.057652] pm8821_probe: PMIC revision 2: PM8821 rev 0B
  86. [ 0.057652] pm8821_probe: PMIC version: PM8821 ver 2.1
  87. [ 0.058232] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
  88. [ 0.058263] pm8xxx_mpp_probe: OK: base=208, ngpio=4
  89. [ 0.058690] gpio_vreg_probe: id=86, name=ext_dsv_load, gpio=86, gpio_label=ext_dsv_load_en
  90. [ 0.059942] saw_probe: id=0, name=8921_s5
  91. [ 0.060247] saw_probe: id=1, name=8921_s6
  92. [ 0.060643] saw_probe: id=2, name=8821_s0
  93. [ 0.060949] saw_probe: id=3, name=8821_s1
  94. [ 0.069311] persistent_ram: found existing buffer, size 199844, start 199844
  95. [ 0.631558] console [ram-1] enabled
  96. [ 0.632931] [NORMAL-DEBUG] apq8064_device_uart_gsbi4.id : 0
  97. [ 0.633023] [DEBUG] uart_enable : 1
  98. [ 0.635617] [Touch D] apq8064_init_input: NOT DCM KDDI, reg synaptics driver
  99. [ 0.639218] sps:REVISION of BAM 0xf0068000 is 0x5.
  100. [ 0.639371] sps:BAM 0x12244000 is registered.
  101. [ 0.639829] sps:sps is ready.
  102. [ 0.669037] bio: create slab <bio-0> at 0
  103. [ 0.669800] ION heap vmalloc created
  104. [ 0.669922] ION heap mm created at a0000000 with size 3800000
  105. [ 0.670074] ION heap mm_fw created at 9fe00000 with size 1e0000
  106. [ 0.670196] ION heap mfc created at a3800000 with size 2000
  107. [ 0.670349] ION heap iommu created
  108. [ 0.670471] ION heap qsecom created at fea07000 with size 780000
  109. [ 0.670593] ION heap audio created at ff187000 with size 4cf000
  110. [ 0.671905] pm8xxx_pwm_probe: OK
  111. [ 0.672669] SCSI subsystem initialized
  112. [ 0.673004] sps:REVISION of BAM 0xf0070000 is 0x12.
  113. [ 0.673187] sps:BAM 0x28084000 is registered.
  114. [ 0.673981] usbcore: registered new interface driver usbfs
  115. [ 0.674286] usbcore: registered new interface driver hub
  116. [ 0.674500] usbcore: registered new device driver usb
  117. [ 0.674958] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input0
  118. [ 0.675934] Linux media interface: v0.10
  119. [ 0.676056] Linux video capture interface: v2.00
  120. [ 0.678315] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
  121. [ 0.678589] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
  122. [ 0.678864] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
  123. [ 0.679078] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
  124. [ 0.679352] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
  125. [ 0.679566] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
  126. [ 0.679841] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
  127. [ 0.680115] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
  128. [ 0.680329] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
  129. [ 0.680604] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks
  130. [ 0.680878] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks
  131. [ 0.681092] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks
  132. [ 0.681672] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
  133. [ 0.681916] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
  134. [ 0.682221] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
  135. [ 0.682557] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
  136. [ 0.682771] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
  137. [ 0.683106] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
  138. [ 0.683412] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
  139. [ 0.683625] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
  140. [ 0.683931] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
  141. [ 0.684175] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
  142. [ 0.684480] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
  143. [ 0.684785] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
  144. [ 0.685029] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
  145. [ 0.685365] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
  146. [ 0.685640] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
  147. [ 0.686006] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
  148. [ 0.686342] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
  149. [ 0.686616] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
  150. [ 0.686891] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
  151. [ 0.687257] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
  152. [ 0.687532] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
  153. [ 0.687837] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
  154. [ 0.688081] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
  155. [ 0.688325] Advanced Linux Sound Architecture Driver Version 1.0.25.
  156. [ 0.688997] Bluetooth: Core ver 2.16
  157. [ 0.689119] NET: Registered protocol family 31
  158. [ 0.689211] Bluetooth: HCI device and connection manager initialized
  159. [ 0.689363] Bluetooth: HCI socket layer initialized
  160. [ 0.689424] Bluetooth: L2CAP socket layer initialized
  161. [ 0.689821] Bluetooth: SCO socket layer initialized
  162. [ 0.690187] cfg80211: Calling CRDA to update world regulatory domain
  163. [ 0.690950] earjack debugger probed
  164. [ 0.692049] Switching to clocksource gp_timer
  165. [ 0.698611] NET: Registered protocol family 2
  166. [ 0.698977] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  167. [ 0.699649] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  168. [ 0.701022] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  169. [ 0.701815] TCP: Hash tables configured (established 131072 bind 65536)
  170. [ 0.701907] TCP: reno registered
  171. [ 0.701999] UDP hash table entries: 512 (order: 2, 16384 bytes)
  172. [ 0.702090] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  173. [ 0.702609] NET: Registered protocol family 1
  174. [ 0.702975] Trying to unpack rootfs image as initramfs...
  175. [ 0.802533] Freeing initrd memory: 1432K
  176. [ 0.804272] Detected 5 counters on the L2CC PMU.
  177. [ 0.806683] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
  178. [ 0.808789] pil_riva pil_riva: using secure boot
  179. [ 0.812421] pil_dsps pil_dsps: using secure boot
  180. [ 0.814130] pil_gss pil_gss: using secure boot
  181. [ 0.816694] smd_channel_probe_worker: allocation table not initialized
  182. [ 0.821638] msm_dsps driver version 4.02.
  183. [ 0.823256] NET: Registered protocol family 27
  184. [ 0.825881] lpass_fatal_init: lpass SSR driver init'ed.
  185. [ 0.826155] wcnss_8960: module initialized
  186. [ 0.826522] gss_8064_init: gss fatal driver init'ed.
  187. [ 0.827163] acpuclk-8064 acpuclk-8064: ACPU PVS: Fast
  188. [ 0.830001] acpuclk-8064 acpuclk-8064: CPU0: 8 frequencies supported
  189. [ 0.830184] acpuclk-8064 acpuclk-8064: CPU1: 8 frequencies supported
  190. [ 0.830489] acpuclk-8064 acpuclk-8064: CPU2: 8 frequencies supported
  191. [ 0.830795] acpuclk-8064 acpuclk-8064: CPU3: 8 frequencies supported
  192. [ 0.833206] kcal_ctrl_init
  193. [ 0.834121] persistent_ram: no valid data in buffer (sig = 0x4e4f524d)
  194. [ 0.838425] mdm_do_first_power_on: Powering on modem for the first time
  195. [ 0.913108] mdm_pblrdy_change: pbl ready:1
  196. [ 1.122936] mdm_common_create: Registering mdm modem
  197. [ 1.124248] usbcore: registered new interface driver hsic_sysmon
  198. [ 1.127422] highmem bounce pool size: 64 pages
  199. [ 1.139691] NTFS driver 2.1.30 [Flags: R/W].
  200. [ 1.140515] fuse init (API version 7.18)
  201. [ 1.141187] msgmni has been set to 1230
  202. [ 1.146925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  203. [ 1.147260] io scheduler noop registered
  204. [ 1.147443] io scheduler deadline registered (default)
  205. [ 1.147749] io scheduler row registered
  206. [ 1.148206] io scheduler cfq registered
  207. [ 1.149214] lm3530 probed
  208. [ 1.153486] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1c00000
  209. [ 1.153670] mmss_sfpb base phy_addr = 0x5700000,virt = 0xf007a000
  210. [ 1.155043] mipi_lgit_lcd_probe start
  211. [ 1.155226] setting pdata->panel_info.fb_num to 3. type: 8
  212. [ 1.168136] FrameBuffer[0] 768x1280 size=11796480 bytes is registered successfully!
  213. [ 1.168533] load_565rle_image: Can not open /initlogo.rle
  214. [ 1.169601] mdp4_dsi_vsync_init: ndx=0
  215. [ 1.171524] setting pdata->panel_info.fb_num to 1. type: 7
  216. [ 1.175827] FrameBuffer[1] 1920x1080 size=4149248 bytes is registered successfully!
  217. [ 1.176224] load_565rle_image: Can not open /initlogo.rle
  218. [ 1.177048] mdp4_dtv_vsync_init: ndx=0
  219. [ 1.177475] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group cf95e408
  220. [ 1.179093] setting pdata->panel_info.fb_num to 1. type: 10
  221. [ 1.179581] Inside writeback_driver_init
  222. [ 1.180283] Inside writeback_probe
  223. [ 1.182694] FrameBuffer[2] 1280x720 size=1843200 bytes is registered successfully!
  224. [ 1.183091] load_565rle_image: Can not open /initlogo.rle
  225. [ 1.185991]
  226. [ 1.185991] msm_vidc_enc: Inside vid_enc_init()
  227. [ 1.186723]
  228. [ 1.186723] msm_vidc_enc: Inside vid_enc_vcd_init()
  229. [ 1.189104] msm_serial_hs module loaded
  230. [ 1.189775] msm_serial_hsl: detected port #0
  231. [ 1.190294] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16340000 (irq = 184) is a MSM
  232. [ 1.190569] msm_serial_hsl: console setup on port #0
  233. [ 1.191271] console [ttyHSL0] enabled
  234. [ 1.191881] msm_serial_hsl: driver initialized
  235. [ 1.194353] msm_rotator_probe: rotator_hw_revision=2
  236. [ 1.199084] diagchar initialized now
  237. [ 1.201342] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  238. [ 1.217854] brd: module loaded
  239. [ 1.225576] loop: module loaded
  240. [ 1.229024] anx7808 init gpio
  241. [ 1.262963] anx7808 dvdd is already on
  242. [ 1.292598] sp_tx_hardware_poweron: anx7808 power on
  243. [ 1.293697] sp_tx_chip_located: ANX7808 BA is found.
  244. [ 1.295254] sp_tx_vbus_powerdown: 3.3V output disabled
  245. [ 1.352632] sp_tx_hardware_powerdown: anx7808 power down
  246. [ 1.352937] sp_tx_set_sys_state: SP_TX To System State:
  247. [ 1.353120] sp_tx_set_sys_state: STATE_CABLE_PLUG
  248. [ 1.354097] gammacontrol_init misc_register(gammacontrol)
  249. [ 1.354799] tabla2x-slim tabla2x-slim: Platform data from board file
  250. [ 1.450511] wcd9xxx_device_init : Codec version 2 initialized
  251. [ 1.452067] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  252. [ 1.452372] i2c-core: driver [tabla-i2c-core] using legacy resume method
  253. [ 1.453807] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver flags = 10
  254. [ 1.454326] bcm2079x-i2c 0-a1fa: requesting IRQ 317
  255. [ 1.454784] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver exited successfully
  256. [ 1.456004] SCSI Media Changer driver v0.25
  257. [ 1.458019] tun: Universal TUN/TAP device driver, 1.6
  258. [ 1.458202] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  259. [ 1.458721] rmnet_init: BAM devices[8]
  260. [ 1.470685] PPP generic driver version 2.4.2
  261. [ 1.471112] PPP BSD Compression module registered
  262. [ 1.471417] PPP Deflate Compression module registered
  263. [ 1.473584] PPP MPPE Compression module registered
  264. [ 1.473889] NET: Registered protocol family 24
  265. [ 1.474103] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  266. [ 1.474408] CSLIP: code copyright 1989 Regents of the University of California.
  267. [ 1.474896] wcnss_wlan probed in built-in mode
  268. [ 1.476148] usbcore: registered new interface driver asix
  269. [ 1.476453] usbcore: registered new interface driver cdc_ether
  270. [ 1.476880] usbcore: registered new interface driver net1080
  271. [ 1.477186] usbcore: registered new interface driver cdc_subset
  272. [ 1.477582] usbcore: registered new interface driver zaurus
  273. [ 1.478101] usbcore: registered new interface driver cdc_ncm
  274. [ 1.478437] usbcore: registered new interface driver rmnet_usb
  275. [ 1.479505] rmnet usb ctrl Initialized.
  276. [ 1.479810] msm_otg msm_otg: msm_otg probe
  277. [ 1.480054] msm_otg msm_otg: failed to get phy_clk
  278. [ 1.480451] msm_otg msm_otg: OTG regs = f0090000
  279. [ 1.484205] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  280. [ 1.498428] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
  281. [ 1.498672] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
  282. [ 1.523180] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
  283. [ 1.542804] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
  284. [ 1.543201] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  285. [ 1.543506] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  286. [ 1.543689] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
  287. [ 1.543995] usb usb1: Manufacturer: Linux 3.4.0-franco.Kernel-nightly ehci_hcd
  288. [ 1.544300] usb usb1: SerialNumber: msm_hsic_host
  289. [ 1.545246] hub 1-0:1.0: USB hub found
  290. [ 1.545490] hub 1-0:1.0: 1 port detected
  291. [ 1.548695] usbcore: registered new interface driver cdc_acm
  292. [ 1.549549] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  293. [ 1.549855] Initializing USB Mass Storage driver...
  294. [ 1.550312] usbcore: registered new interface driver usb-storage
  295. [ 1.550618] USB Mass Storage support registered.
  296. [ 1.550892] usbcore: registered new interface driver ums-alauda
  297. [ 1.551411] usbcore: registered new interface driver ums-cypress
  298. [ 1.551716] usbcore: registered new interface driver ums-datafab
  299. [ 1.552113] usbcore: registered new interface driver ums-freecom
  300. [ 1.552418] usbcore: registered new interface driver ums-isd200
  301. [ 1.552907] usbcore: registered new interface driver ums-jumpshot
  302. [ 1.553181] usbcore: registered new interface driver ums-karma
  303. [ 1.553609] usbcore: registered new interface driver ums-onetouch
  304. [ 1.553914] usbcore: registered new interface driver ums-sddr09
  305. [ 1.554341] usbcore: registered new interface driver ums-sddr55
  306. [ 1.554768] usbcore: registered new interface driver ums-usbat
  307. [ 1.555196] usbcore: registered new interface driver usbserial
  308. [ 1.555501] usbserial: USB Serial Driver core
  309. [ 1.555806] usbcore: registered new interface driver qcserial
  310. [ 1.556050] USB Serial support registered for Qualcomm USB modem
  311. [ 1.556477] usbcore: registered new interface driver qc_csvt
  312. [ 1.556722] USB Serial support registered for qc_csvt
  313. [ 1.557179] usbcore: registered new interface driver usb_ehset_test
  314. [ 1.557485] usbcore: registered new interface driver diag_bridge
  315. [ 1.558003] usbcore: registered new interface driver mdm_bridge
  316. [ 1.558950] msm_otg msm_otg: phy_reset: success
  317. [ 1.560262] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
  318. [ 1.560842] mbim_init: initialize 1 instances
  319. [ 1.561300] mbim_init: Initialized 1 ports
  320. [ 1.564810] rndis_qc_init: initialize rndis QC instance
  321. [ 1.565725] android_usb gadget: Mass Storage Function, version: 2009/09/11
  322. [ 1.565908] android_usb gadget: Number of LUNs=1
  323. [ 1.566213] lun0: LUN: removable file: (no medium)
  324. [ 1.567007] android_usb gadget: android_usb ready
  325. [ 1.569327] input: keypad_8064 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input1
  326. [ 1.570700] [Touch D]touch enable
  327. [ 1.912986] usb 1-1: new high-speed USB device number 2 using msm_hsic_host
  328. [ 1.968197] usb 1-1: New USB device found, idVendor=05c6, idProduct=9008
  329. [ 1.968502] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  330. [ 1.968686] usb 1-1: Product: QHSUSB__BULK
  331. [ 1.968991] usb 1-1: Manufacturer: Qualcomm CDMA Technologies MSM
  332. [ 1.972562] qcserial 1-1:1.0: Qualcomm USB modem converter detected
  333. [ 1.973386] usb 1-1: Qualcomm USB modem converter now attached to ttyUSB0
  334. [ 1.974759] input: touch_dev as /devices/virtual/input/input2
  335. [ 1.977659] [Touch] common[1] finger[17] flash[52] button[0]
  336. [ 1.979032] [Touch] IC is 7020, H pattern, panel is G2, Firmware: E027.
  337. [ 1.981168] [Touch] fw_rev[0:0] product_id[PLG137:PLG137] force_upgrade[0]
  338. [ 1.981626] [Touch] DO NOT UPDATE 7020 G2 H pattern FW-upgrade is not executed
  339. [ 1.981992] [Touch] Touch driver is initialized
  340. [ 1.984343] using rtc device, pm8xxx_rtc, for alarms
  341. [ 1.984556] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  342. [ 1.985685] i2c /dev entries driver
  343. [ 1.987120] usbcore: registered new interface driver uvcvideo
  344. [ 1.987425] USB Video Class driver (1.1.1)
  345. [ 1.989409] __jrchoi: msm_sensor_init_module: E
  346. [ 2.018190] msm_eeprom_probe probe_fail
  347. [ 2.019105] msm_server_update_sensor_info mctl_node_name[0] = video1
  348. [ 2.049443] msm_eeprom_probe probe_fail
  349. [ 2.050328] msm_server_update_sensor_info mctl_node_name[1] = video3
  350. [ 2.056615] msm_cam_server_request_irq IRQ Router hw is not present.
  351. [ 2.057836] lm3559_init: start
  352. [ 2.058415] lm3559_probe: probe stop
  353. [ 2.089607] pm8xxx_tm_probe: OK
  354. [ 2.091377] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
  355. [ 2.091896] cpuidle: using governor ladder
  356. [ 2.092202] cpuidle: using governor menu
  357. [ 2.093056] mmc0: SDCC Version: 0x0000001a
  358. [ 2.094857] mmc0: bam physical base=0x12402000
  359. [ 2.095162] mmc0: bam virtual base=0xf00a0000
  360. [ 2.095345] sps:BAM 0x12402000 is registered.
  361. [ 2.095620] mmc0: BAM device registered. bam_handle=0xef01d000
  362. [ 2.096169] sps:REVISION of BAM 0xf00a0000 is 0x5.
  363. [ 2.096902] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
  364. [ 2.097237] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
  365. [ 2.097604] mmc0: No card detect facilities available
  366. [ 2.099923] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
  367. [ 2.100320] mmc0: Controller capabilities: 0x0000009e
  368. [ 2.100503] mmc0: 8 bit data mode enabled
  369. [ 2.100778] mmc0: 4 bit data mode disabled
  370. [ 2.101052] mmc0: polling status mode disabled
  371. [ 2.101236] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
  372. [ 2.101632] mmc0: Slot eject status = 0
  373. [ 2.101815] mmc0: Power save feature enable = 1
  374. [ 2.102090] mmc0: SPS-BAM data transfer mode available
  375. [ 2.103952] usbcore: registered new interface driver usbhid
  376. [ 2.104135] usbhid: USB HID core driver
  377. [ 2.105600] ashmem: initialized
  378. [ 2.105966] logger: created 256K log 'log_main'
  379. [ 2.106302] logger: created 256K log 'log_events'
  380. [ 2.106729] logger: created 256K log 'log_radio'
  381. [ 2.107095] logger: created 256K log 'log_system'
  382. [ 2.108530] usbcore: registered new interface driver snd-usb-audio
  383. [ 2.111033] tabla_probe
  384. [ 2.112376] amp_enable: amp enable bypass(2)
  385. [ 2.112681] amp_enable: AMP_EN is set to 0
  386. [ 2.114756] msm_pcm_probe: dev name msm-voip-dsp
  387. [ 2.115580] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8
  388. [ 2.115885] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8
  389. [ 2.117991] msm_pcm_probe: dev name msm-pcm-dsp
  390. [ 2.118693] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
  391. [ 2.119365] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
  392. [ 2.121257] msm_compr_probe: dev name msm-compr-dsp
  393. [ 2.122447] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  394. [ 2.124492] msm8930_audio_init: Not the right machine type
  395. [ 2.124675] msm_audio_init: Not the right machine type
  396. [ 2.254021] mmc0: new high speed DDR MMC card at address 0001
  397. [ 2.255333] mmcblk0: mmc0:0001 016G92 14.6 GiB
  398. [ 2.261254] Alternate GPT is invalid, using primary GPT.
  399. [ 2.261712] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
  400. [ 2.297970] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  401. [ 2.299221] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  402. [ 2.300289] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
  403. [ 2.301510] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
  404. [ 2.302640] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
  405. [ 2.303921] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
  406. [ 2.305020] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
  407. [ 2.306119] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
  408. [ 2.307157] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
  409. [ 2.308469] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
  410. [ 2.309659] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
  411. [ 2.310849] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
  412. [ 2.312040] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
  413. [ 2.313474] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
  414. [ 2.314665] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
  415. [ 2.316740] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
  416. [ 2.322569] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
  417. [ 2.323607] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
  418. [ 2.324492] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
  419. [ 2.325469] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
  420. [ 2.326354] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
  421. [ 2.327453] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
  422. [ 2.328429] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
  423. [ 2.329528] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
  424. [ 2.330474] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
  425. [ 2.331542] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
  426. [ 2.332488] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
  427. [ 2.333648] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
  428. [ 2.334564] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
  429. [ 2.335663] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
  430. [ 2.336700] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
  431. [ 2.337860] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
  432. [ 2.338806] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
  433. [ 2.339874] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
  434. [ 2.340820] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
  435. [ 2.341889] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
  436. [ 2.342896] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
  437. [ 2.346741] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input3
  438. [ 2.347596] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input4
  439. [ 2.354402] u32 classifier
  440. [ 2.354707] Actions configured
  441. [ 2.354890] Netfilter messages via NETLINK v0.30.
  442. [ 2.355196] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  443. [ 2.356508] ctnetlink v0.93: registering with nfnetlink.
  444. [ 2.356783] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  445. [ 2.357088] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  446. [ 2.357851] xt_time: kernel timezone is -0000
  447. [ 2.358858] ip_tables: (C) 2000-2006 Netfilter Core Team
  448. [ 2.359560] arp_tables: (C) 2002 David S. Miller
  449. [ 2.359987] TCP: bic registered
  450. [ 2.360170] TCP: cubic registered
  451. [ 2.360354] TCP: westwood registered
  452. [ 2.360659] TCP: highspeed registered
  453. [ 2.360811] TCP: hybla registered
  454. [ 2.360994] TCP: htcp registered
  455. [ 2.361269] TCP: vegas registered
  456. [ 2.361452] TCP: veno registered
  457. [ 2.361605] TCP: scalable registered
  458. [ 2.361788] TCP: lp registered
  459. [ 2.362093] TCP: yeah registered
  460. [ 2.362276] TCP: illinois registered
  461. [ 2.362429] Initializing XFRM netlink socket
  462. [ 2.363863] NET: Registered protocol family 10
  463. [ 2.368686] Mobile IPv6
  464. [ 2.368930] ip6_tables: (C) 2000-2006 Netfilter Core Team
  465. [ 2.369632] IPv6 over IPv4 tunneling driver
  466. [ 2.371066] NET: Registered protocol family 17
  467. [ 2.371310] NET: Registered protocol family 15
  468. [ 2.371890] Bluetooth: RFCOMM TTY layer initialized
  469. [ 2.372104] Bluetooth: RFCOMM socket layer initialized
  470. [ 2.372409] Bluetooth: RFCOMM ver 1.11
  471. [ 2.372592] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  472. [ 2.372958] Bluetooth: BNEP filters: protocol multicast
  473. [ 2.373142] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  474. [ 2.373599] L2TP core driver, V2.0
  475. [ 2.373813] PPPoL2TP kernel driver, V2.0
  476. [ 2.375888] VFP support v0.3: implementor 51 architecture 64 part 6f variant 0 rev 2
  477. [ 2.376407] auto_hotplug: v1.0
  478. [ 2.376560] Author: _thalamus
  479. [ 2.376712] Modified by: Francisco Franco
  480. [ 2.377018] auto_hotplug: 4 CPUs detected
  481. [ 2.377231] Registering SWP/SWPB emulation handler
  482. [ 2.404303] clock_late_init: Removing enables held for handed-off clocks
  483. [ 2.415656] MSM Watchdog Initialized
  484. [ 2.442728] registered taskstats version 1
  485. [ 2.447611] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2013-02-12 10:00:21 UTC (1360663221)
  486. [ 2.449626] read_ocv_trim: program rev reg is 0x4d
  487. [ 2.449839] pm8921_is_usb_chg_plugged_in: called before init
  488. [ 2.452372] pm8921_is_usb_chg_plugged_in: called before init
  489. [ 2.453990] pm8921_is_usb_chg_plugged_in: called before init
  490. [ 2.454234] ocv_ir_compensation: comp ocv = 4309456, ocv = 4306872, ibatt_ua = 11800, rbatt_mohm = 219
  491. [ 2.454570] read_soc_params_raw: discard shutdown soc! cc_raw = 0x140215
  492. [ 2.454967] calculate_unusable_charge_uah: Using shutdown_iavg_ma = 500 in all samples
  493. [ 2.455272] pm8921_is_batfet_closed: called before init
  494. [ 2.483137] pm8921_is_usb_chg_plugged_in: called before init
  495. [ 2.483442] adjust_soc: ibat_ua = 377400, vbat_uv = 4260369, soc = 99, batt_temp=377
  496. [ 2.486128] pm8921_get_batt_state: called before init
  497. [ 2.486464] pm8921_bms_probe: OK battery_capacity_at_boot=99 volt = 4260150 ocv = 4309456
  498. [ 2.488081] power_supply usb: driver failed to report `present' property: 4294967274
  499. [ 2.488478] power_supply usb: driver failed to report `present' property: 4294967274
  500. [ 2.488966] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
  501. [ 2.489333] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
  502. [ 2.490950] pm8921_get_batt_state: called before init
  503. [ 2.493636] pm8921_get_batt_state: called before init
  504. [ 2.504043] wlc: bq51051b_wlc_probe: probe
  505. [ 2.504349] wlc: bq51051b_wlc_hw_init: hw_init
  506. [ 2.504837] power_supply wireless: driver failed to report `present' property: 4294967274
  507. [ 2.505356] power_supply wireless: driver failed to report `present' property: 4294967274
  508. [ 2.505936] batt_temp_ctrl_init
  509. [ 2.506332] batt_temp_ctrl_probe
  510. [ 2.508072] android_vibrator: default amplitude 88
  511. [ 2.508377] android vibrator probed
  512. [ 2.510666] input: hs_detect as /devices/virtual/input/input5
  513. [ 2.511246] ALSA device list:
  514. [ 2.511399] #0: apq8064-tabla-snd-card
  515. [ 2.514115] Freeing init memory: 1032K
  516. [ 2.524675] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  517. [ 2.530932] init: invalid gid 'qcom_diag'
  518. [ 2.689699] init: cannot open '/initlogo.rle'
  519. [ 2.775186] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1
  520. [ 2.806867] EXT4-fs (mmcblk0p22): 8 orphan inodes deleted
  521. [ 2.806958] EXT4-fs (mmcblk0p22): recovery complete
  522. [ 2.813520] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  523. [ 2.876575] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/cache
  524. [ 2.934381] EXT4-fs (mmcblk0p22): mounted filesystem with writeback data mode. Opts: barrier=1,discard,data=writeback,noauto_da_alloc
  525. [ 3.233786] msm_otg msm_otg: Avail curr from USB = 1500
  526. [ 3.234091] msm_otg msm_otg: current: 0 -> 1500 (mA)
  527. [ 3.234152] pm_power_set_property_usb: usb_target_ma 1500
  528. [ 3.234945] msm_otg msm_otg: USB in low power mode
  529. [ 3.749549] EXT4-fs (mmcblk0p23): 9 orphan inodes deleted
  530. [ 3.749732] EXT4-fs (mmcblk0p23): recovery complete
  531. [ 3.768991] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  532. [ 3.798901] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
  533. [ 3.830795] EXT4-fs (mmcblk0p23): mounted filesystem with writeback data mode. Opts: barrier=1,discard,data=writeback,noauto_da_alloc
  534. [ 3.841019] EXT4-fs (mmcblk0p20): recovery complete
  535. [ 3.841782] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nodelalloc
  536. [ 3.914542] wcnss_wlan triggered by userspace
  537. [ 4.003723] unplug_check_worker: usb_now=700, usb_target = 1500
  538. [ 4.095803] pil pil1: wcnss: Brought out of reset
  539. [ 4.096047] wcnss_8960: Subsystem restart activated for riva.
  540. [ 4.143689] pil pil4: gss: Failed to locate gss.mdt
  541. [ 4.147169] pil pil4: gss: Failed to locate gss.mdt
  542. [ 4.149855] pil pil4: gss: Failed to locate gss.mdt
  543. [ 4.151381] pil pil4: gss: Failed to locate gss.mdt
  544. [ 4.174515] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
  545. [ 4.174729] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
  546. [ 4.174912] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
  547. [ 4.178391] enable_store: android_usb: already disabled
  548. [ 4.179093] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
  549. [ 4.180131] adb_open
  550. [ 4.180253] mtp_bind_config
  551. [ 4.180344] adb_bind_config
  552. [ 4.191881] EXT4-fs (mmcblk0p21): re-mounted. Opts: data=ordered
  553. [ 4.203754] unplug_check_worker: usb_now=850, usb_target = 1500
  554. [ 4.296780] mdm_modem_ioctl: Powering on mdm
  555. [ 4.307157] EXT4-fs (mmcblk0p21): re-mounted. Opts: data=ordered
  556. [ 4.317259] warning: `rild' uses 32-bit capabilities (legacy support in use)
  557. [ 4.457195] pil pil3: dsps: Brought out of reset
  558. [ 4.523302] wcnss_wlan_ctrl_probe: SMD ctrl channel up
  559. [ 4.705234] mdp4_dtv_start: <ID=0 1920x1080 (88,44,148), (4,5,36) 148MHz>
  560. [ 4.708042] dtv_on: tv_src_clk=148500kHz, pm_qos_rate=148500kHz, [0]
  561. [ 4.708713] hdmi_msm hdmi_msm.1: power: ON (1920x1080 148500000)
  562. [ 4.708805] hdmi_msm hdmi_msm.1: power=OFF DVI= OFF
  563. [ 4.708896] mdp4_dtv_on:
  564. [ 4.710056] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=1
  565. [ 4.710148] hdmi_msm hdmi_msm.1: power: OFF (audio off, Reset Core)
  566. [ 4.710300] hdmi_msm hdmi_msm.1: HDMI Audio: Disabled
  567. [ 4.710361] dtv_off
  568. [ 4.713077] mdp4_dtv_off:
  569. [ 4.713200] mdp4_overlay_writeback_on: pipe_alloc failed
  570. [ 4.713261] msm_fb_open: can't turn on display!
  571. [ 4.713932] hdmi_msm hdmi_msm.1: hdmi_msm_hpd_feature: 1
  572. [ 5.003906] unplug_check_worker: usb_now=900, usb_target = 1500
  573. [ 5.023989] mipi_dsi_controller_cfg: DSI status=8 failed
  574. [ 5.024172] mipi_dsi_panel_power: mipi lcd function started status = 1
  575. [ 5.024172] ext_dsv_load: Failed to create debugfs directory
  576. [ 5.026155] mipi_dsi_panel_power : reset start.
  577. [ 5.049931] mipi_lgit_lcd_on started
  578. [ 5.070685] mipi_lgit_lcd_on finished
  579. [ 5.203815] unplug_check_worker: usb_now=1100, usb_target = 1500
  580. [ 5.659209] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 96000000
  581. [ 5.662017] mdp4_overlay_mdp_perf_upd mdp bw is changed [1] from 4 to 1
  582. [ 5.758766] pil pil0: q6: Brought out of reset
  583. [ 5.791820] apr_tal:Q6 Is Up
  584. [ 5.791973] apr_tal: SMD_EVENT_OPEN
  585. [ 5.811750] diag: proc 2, msg mask update fail -12, tried 419
  586. [ 5.823714] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  587. [ 5.823836] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  588. [ 5.823958] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  589. [ 5.824050] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  590. [ 5.824172] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  591. [ 6.003815] unplug_check_worker: usb_now=1300, usb_target = 1500
  592. [ 6.203815] unplug_check_worker: usb_now=1500, usb_target = 1500
  593. [ 8.053563] apr_tal: SMD_EVENT_OPEN
  594. [ 10.711002] mdm_modem_ioctl: normal boot done
  595. [ 10.745368] mdm_pblrdy_change: pbl ready:0
  596. [ 11.388066] mdm_status_change: status = 1: mdm is now ready
  597. [ 11.392644] msm_hsic_host msm_hsic_host: remove, state 1
  598. [ 11.392736] usb usb1: USB disconnect, device number 1
  599. [ 11.392858] usb 1-1: USB disconnect, device number 2
  600. [ 11.393377] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
  601. [ 11.393499] qcserial 1-1:1.0: device disconnected
  602. [ 11.394414] msm_hsic_host msm_hsic_host: USB bus 1 deregistered
  603. [ 11.407385] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
  604. [ 11.407508] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
  605. [ 11.433755] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
  606. [ 11.453715] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
  607. [ 11.453868] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  608. [ 11.453990] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  609. [ 11.454082] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
  610. [ 11.454143] usb usb1: Manufacturer: Linux 3.4.0-franco.Kernel-nightly ehci_hcd
  611. [ 11.454265] usb usb1: SerialNumber: msm_hsic_host
  612. [ 11.454692] hub 1-0:1.0: USB hub found
  613. [ 11.454784] hub 1-0:1.0: 1 port detected
  614. [ 11.823744] usb 1-1: new high-speed USB device number 2 using msm_hsic_host
  615. [ 11.886738] usb 1-1: New USB device found, idVendor=05c6, idProduct=9048
  616. [ 11.886799] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=0
  617. [ 11.886922] usb 1-1: Product: Qualcomm CDMA Technologies MSM
  618. [ 11.886983] usb 1-1: Manufacturer: Qualcomm, Incorporated
  619. [ 11.895803] qcserial 1-1:1.2: Qualcomm USB modem converter detected
  620. [ 11.896108] usb 1-1: Qualcomm USB modem converter now attached to ttyUSB0
  621. [ 11.898763] rmnet_usb 1-1:1.5: rmnet_usb0: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 9e:38:26:da:b6:4b
  622. [ 11.904806] rmnet_usb 1-1:1.6: rmnet_usb1: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 9e:38:26:da:b6:4b
  623. [ 11.925255] rmnet_usb 1-1:1.7: rmnet_usb2: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 9e:38:26:da:b6:4b
  624. [ 11.934869] rmnet_usb 1-1:1.8: rmnet_usb3: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 9e:38:26:da:b6:4b
  625. [ 14.533709] wcnss_post_bootup: Cancel APPS vote for Iris & Riva
  626. [ 14.829818] pm8xxx-led pm8xxx-led: resume red set 0
  627. [ 14.830001] pm8xxx-led pm8xxx-led: resume green set 0
  628. [ 14.830093] pm8xxx-led pm8xxx-led: resume blue set 0
  629. [ 14.830642] pm8xxx-led pm8xxx-led: resume red set 0
  630. [ 14.830734] pm8xxx-led pm8xxx-led: resume green set 255
  631. [ 14.831130] pm8xxx-led pm8xxx-led: resume blue set 0
  632. [ 14.952083] lowmem_shrink: convert oom_adj to oom_score_adj:
  633. [ 14.952205] oom_adj 0 => oom_score_adj 0
  634. [ 14.952266] oom_adj 1 => oom_score_adj 58
  635. [ 14.952327] oom_adj 2 => oom_score_adj 117
  636. [ 14.952449] oom_adj 4 => oom_score_adj 235
  637. [ 14.952479] oom_adj 9 => oom_score_adj 529
  638. [ 14.952540] oom_adj 15 => oom_score_adj 1000
  639. [ 15.113383] wlan: loading driver v3.2.1.13
  640. [ 15.135815] [WLAN][493:E :SME] csrOpen: 326: country Code from nvRam USI
  641. [ 15.135815]
  642. [ 15.136883] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
  643. [ 15.144452] [2:493:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  644. [ 15.149671] [0:711:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  645. [ 15.151472] [0:711:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  646. [ 15.153151] [0:711:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  647. [ 15.154799] [0:711:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  648. [ 15.155409] [0:711:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  649. [ 15.157027] [0:711:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  650. [ 15.158705] [0:711:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  651. [ 15.160354] [0:711:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  652. [ 15.160964] [0:711:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  653. [ 15.163680] [2:493:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  654. [ 15.177170] EXT4-fs (dm-0): re-mounted. Opts: (null)
  655. [ 15.194597] EXT4-fs (dm-0): re-mounted. Opts: (null)
  656. [ 15.290920] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
  657. [ 15.322722] wlan: WCNSS WLAN version 1.3.1.0
  658. [ 15.322905] wlan: WCNSS software version AAAAAANAAW122023
  659. [ 15.323088] wlan: WCNSS hardware version WCN v2.0 IRIS v2.0 with 48MHz XO
  660. [ 15.323241] [2:493:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  661. [ 15.338257] [WLAN][493:E :HDD] In module init: Ensure Force XO Core is OFF when WLAN is turned ON so Core toggles unless we enter PS
  662. [ 15.338257]
  663. [ 15.338562] wlan: driver loaded
  664. [ 15.414466] [WLAN][730:E :SME] PMC: STA not associated with an AP with single active session. BMPS cannot be entered
  665. [ 15.414466]
  666. [ 15.415138] ADDRCONF(NETDEV_UP): p2p0: link is not ready
  667. [ 15.425881] EXT4-fs (dm-1): re-mounted. Opts: (null)
  668. [ 15.468243] EXT4-fs (dm-1): re-mounted. Opts: (null)
  669. [ 15.549702] EXT4-fs (dm-2): mounted filesystem without journal. Opts: (null)
  670. [ 15.585869] EXT4-fs (dm-2): re-mounted. Opts: (null)
  671. [ 15.604669] EXT4-fs (dm-2): re-mounted. Opts: (null)
  672. [ 15.695162] EXT4-fs (dm-3): mounted filesystem without journal. Opts: (null)
  673. [ 15.717625] EXT4-fs (dm-3): re-mounted. Opts: (null)
  674. [ 15.720158] EXT4-fs (dm-3): re-mounted. Opts: (null)
  675. [ 15.798657] EXT4-fs (dm-4): mounted filesystem without journal. Opts: (null)
  676. [ 15.821577] EXT4-fs (dm-4): re-mounted. Opts: (null)
  677. [ 15.826980] EXT4-fs (dm-4): re-mounted. Opts: (null)
  678. [ 15.906455] EXT4-fs (dm-5): mounted filesystem without journal. Opts: (null)
  679. [ 15.927239] [WLAN][730:E :SME] PMC: STA not associated with an AP with single active session. BMPS cannot be entered
  680. [ 15.927239]
  681. [ 15.927819] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  682. [ 15.940027] EXT4-fs (dm-5): re-mounted. Opts: (null)
  683. [ 15.951045] EXT4-fs (dm-5): re-mounted. Opts: (null)
  684. [ 16.041416] EXT4-fs (dm-6): mounted filesystem without journal. Opts: (null)
  685. [ 16.066015] EXT4-fs (dm-6): re-mounted. Opts: (null)
  686. [ 16.074744] EXT4-fs (dm-6): re-mounted. Opts: (null)
  687. [ 16.181138] EXT4-fs (dm-7): mounted filesystem without journal. Opts: (null)
  688. [ 16.276361] EXT4-fs (dm-7): re-mounted. Opts: (null)
  689. [ 16.291683] EXT4-fs (dm-7): re-mounted. Opts: (null)
  690. [ 16.372623] EXT4-fs (dm-8): mounted filesystem without journal. Opts: (null)
  691. [ 16.386357] EXT4-fs (dm-8): re-mounted. Opts: (null)
  692. [ 16.408576] EXT4-fs (dm-8): re-mounted. Opts: (null)
  693. [ 16.527239] EXT4-fs (dm-9): mounted filesystem without journal. Opts: (null)
  694. [ 16.559377] EXT4-fs (dm-9): re-mounted. Opts: (null)
  695. [ 16.569143] EXT4-fs (dm-9): re-mounted. Opts: (null)
  696. [ 16.610254] wlan: connected to 08:60:6e:22:59:d0
  697. [ 16.610895] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  698. [ 16.614619] [WLAN][713:E :TL ] WLAN TL:RX Frame not EAPOL or WAI EtherType 0 - dropping
  699. [ 16.616816] [WLAN][713:E :TL ] WLAN TL:RX Frame EAPOL EtherType 34958 - processing
  700. [ 16.618464] [WLAN][0:E :TL ] WLAN TL:Packet pending indication for STA: 3 AC: 3 State: 1
  701. [ 16.618586] [WLAN][712:E :TL ] WLAN TL: WLANTL_STATxConn no more packets in HDD for AC: 3 AC Mask: 0
  702. [ 16.623744] [WLAN][0:E :TL ] WLAN TL:Packet pending indication for STA: 3 AC: 1 State: 1
  703. [ 16.623927] [WLAN][712:E :TL ] WLAN TL: WLANTL_STATxConn no more packets in HDD for AC: 1 AC Mask: 0
  704. [ 16.630611] [WLAN][713:E :TL ] WLAN TL:RX Frame EAPOL EtherType 34958 - processing
  705. [ 16.630917] [WLAN][0:E :TL ] WLAN TL:Packet pending indication for STA: 3 AC: 3 State: 1
  706. [ 16.631191] [WLAN][712:E :TL ] WLAN TL: WLANTL_STATxConn no more packets in HDD for AC: 3 AC Mask: 0
  707. [ 16.667785] EXT4-fs (dm-10): mounted filesystem without journal. Opts: (null)
  708. [ 16.701113] EXT4-fs (dm-10): re-mounted. Opts: (null)
  709. [ 16.713779] EXT4-fs (dm-10): re-mounted. Opts: (null)
  710. [ 16.804120] EXT4-fs (dm-11): mounted filesystem without journal. Opts: (null)
  711. [ 16.836532] EXT4-fs (dm-11): re-mounted. Opts: (null)
  712. [ 16.864153] EXT4-fs (dm-11): re-mounted. Opts: (null)
  713. [ 17.284999] acc_open
  714. [ 17.285212] acc_release
  715. [ 19.204242] bcm2079x-i2c 0-a1fa: 10,29
  716. [ 19.514695] bcm2079x-i2c 0-a1fa: bcm2079x_dev_unlocked_ioctl, BCMNFC_CHANGE_ADDR (fa02, 77):
  717. [ 19.514756] bcm2079x-i2c 0-a1fa: Change client device from (0x0079) flag = 0000, addr_data[9] = 69
  718. [ 19.515183] bcm2079x-i2c 0-a1fa: Change client device changed to (0x0077) flag = 0000, ret = 10
  719. [ 21.043735] msm_thermal: Limiting cpu0 max frequency to 1026000
  720. [ 21.043857] msm_thermal: Limiting cpu1 max frequency to 1026000
  721. [ 21.043918] msm_thermal: Limiting cpu2 max frequency to 1026000
  722. [ 21.044010] msm_thermal: Limiting cpu3 max frequency to 1026000
  723. [ 21.542865] transport_store: usb cable is not connected
  724. [ 22.543720] msm_thermal: Max frequency reset for cpu0 to 1512000
  725. [ 22.543842] msm_thermal: Max frequency reset for cpu1 to 1512000
  726. [ 22.544025] msm_thermal: Max frequency reset for cpu2 to 1512000
  727. [ 22.544086] msm_thermal: Max frequency reset for cpu3 to 1512000
  728. [ 22.940729] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
  729. [ 23.063818] adjust_soc: ibat_ua = 505200, vbat_uv = 4245573, soc = 99, batt_temp=378
  730. [ 30.044590] msm_thermal: Limiting cpu0 max frequency to 1026000
  731. [ 30.044742] msm_thermal: Limiting cpu1 max frequency to 1026000
  732. [ 30.044803] msm_thermal: Limiting cpu2 max frequency to 1026000
  733. [ 30.044925] msm_thermal: Limiting cpu3 max frequency to 1026000
  734. [ 32.544666] msm_thermal: Max frequency reset for cpu0 to 1512000
  735. [ 32.544849] msm_thermal: Max frequency reset for cpu1 to 1512000
  736. [ 32.544941] msm_thermal: Max frequency reset for cpu2 to 1512000
  737. [ 32.545124] msm_thermal: Max frequency reset for cpu3 to 1512000
  738. [ 33.210590] New whites: 64
  739. [ 33.210682] Update_vals called.
  740. [ 33.420021] New mids: 68
  741. [ 33.420082] Update_vals called.
  742. [ 33.520799] New mids: 22
  743. [ 33.520891] Update_vals called.
  744. [ 33.671570] New mids: 4
  745. [ 33.671661] Update_vals called.
  746. [ 33.837204] New mids: 66
  747. [ 33.837295] Update_vals called.
  748. [ 34.041385] New mids: 32
  749. [ 34.041568] Update_vals called.
  750. [ 35.058782] auto_hotplug: CPU1 down.
  751. [ 35.458232] auto_hotplug: CPU2 down.
  752. [ 43.064733] adjust_soc: ibat_ua = 74300, vbat_uv = 4307361, soc = 99, batt_temp=380
  753. [ 44.011841] init: untracked pid 2244 exited
  754. [ 44.028383] init: untracked pid 2263 exited
  755. [ 53.823683] lm3530_backlight_off, on: 1
  756. [ 53.873370] lm3530_backlight_off, on: 0
  757. [ 53.905020] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  758. [ 53.905020] mipi_dsi_ahb_ctrl: ahb clks already ON
  759. [ 53.905020] mipi_dsi_clk_enable: mipi_dsi_clks already ON
  760. [ 53.905051] mipi_lgit_lcd_off started
  761. [ 53.916770] auto_hotplug: CPU1 online.
  762. [ 53.919090] auto_hotplug: CPU2 online.
  763. [ 54.034762] mipi_lgit_lcd_off finished
  764. [ 54.037814] mipi_dsi_panel_power: mipi lcd function started status = 0
  765. [ 54.039890] lm3530_backlight_off, on: 0
  766. [ 54.041049] auto_hotplug: Offlining CPUs for early suspend
  767. [ 54.041141] [Touch D]touch disable
  768. [ 54.044956] auto_hotplug: CPU1 down.
  769. [ 54.048313] auto_hotplug: CPU2 down.
  770. [ 54.051304] auto_hotplug: CPU3 down.
  771. [ 54.080665] dtv_pipe is not configured yet
  772. [ 63.104959] adjust_soc: ibat_ua = -150300, vbat_uv = 4342713, soc = 99, batt_temp=381
  773. [ 68.538959] [Touch D]touch enable
  774. [ 68.542163] auto_hotplug: CPU1 online.
  775. [ 68.546711] mipi_dsi_panel_power: mipi lcd function started status = 1
  776. [ 68.549732] mipi_dsi_panel_power : reset start.
  777. [ 68.570883] mipi_lgit_lcd_on started
  778. [ 68.631374] mipi_lgit_lcd_on finished
  779. [ 68.635769] lm3530_backlight_on, ++ lm3530_backlight_on
  780. [ 68.669647] init: untracked pid 2246 exited
  781. [ 68.840927] init: untracked pid 2267 exited
  782. [ 68.879475] init: untracked pid 2309 exited
  783. [ 69.964260] init: untracked pid 2381 exited
  784. [ 70.445536] init: untracked pid 2431 exited
  785. [ 70.536883] auto_hotplug: CPU2 online.
  786. [ 70.538959] auto_hotplug: CPU3 online.
  787. [ 71.775431] init: untracked pid 3063 exited
  788. [ 72.750618] auto_hotplug: CPU1 down.
  789. [ 73.079139] auto_hotplug: CPU2 down.
  790. [ 74.136975] auto_hotplug: CPU1 online.
  791. [ 74.139325] auto_hotplug: CPU2 online.
  792. [ 75.347352] auto_hotplug: CPU1 down.
  793. [ 75.677613] auto_hotplug: CPU2 down.
  794. [ 76.836715] auto_hotplug: CPU1 online.
  795. [ 76.838760] auto_hotplug: CPU2 online.
  796. [ 78.049168] auto_hotplug: CPU1 down.
  797. [ 78.379246] auto_hotplug: CPU2 down.
  798. [ 83.105020] adjust_soc: ibat_ua = -84500, vbat_uv = 4333506, soc = 99, batt_temp=383
  799. [ 102.645017] init: untracked pid 3711 exited
  800. [ 103.104806] adjust_soc: ibat_ua = -137900, vbat_uv = 4345089, soc = 99, batt_temp=382
  801. [ 123.104837] adjust_soc: ibat_ua = -130500, vbat_uv = 4347171, soc = 99, batt_temp=381
  802. [ 133.604913] init: untracked pid 3724 exited
  803. [ 137.546345] [WLAN][0:E :HDD] hdd_hard_start_xmit:Queue is Filling up.Inform TL again about pending packets
  804. [ 143.104837] adjust_soc: ibat_ua = -142400, vbat_uv = 4350438, soc = 99, batt_temp=380
  805. [ 163.104745] adjust_soc: ibat_ua = -28300, vbat_uv = 4337961, soc = 99, batt_temp=379
  806. [ 164.601159] init: untracked pid 3758 exited
  807. [ 183.104806] adjust_soc: ibat_ua = -186700, vbat_uv = 4359351, soc = 99, batt_temp=379
  808. [ 195.635647] init: untracked pid 3769 exited
  809. [ 203.104837] adjust_soc: ibat_ua = -162900, vbat_uv = 4357269, soc = 99, batt_temp=377
  810. [ 223.104867] adjust_soc: ibat_ua = -204300, vbat_uv = 4364103, soc = 99, batt_temp=378
  811. [ 226.571310] init: untracked pid 3781 exited
  812. [ 243.104898] adjust_soc: ibat_ua = -83900, vbat_uv = 4350438, soc = 100, batt_temp=378
  813. [ 257.595696] init: untracked pid 3792 exited
  814. [ 263.104837] adjust_soc: ibat_ua = -152000, vbat_uv = 4360242, soc = 100, batt_temp=377
  815. [ 283.104806] adjust_soc: ibat_ua = -185600, vbat_uv = 4364700, soc = 100, batt_temp=377
  816. [ 288.601648] init: untracked pid 3809 exited
  817. [ 303.144819] adjust_soc: ibat_ua = -76600, vbat_uv = 4351626, soc = 100, batt_temp=377
  818. [ 319.614924] init: untracked pid 3820 exited
  819. [ 323.064794] adjust_soc: ibat_ua = -74300, vbat_uv = 4352817, soc = 100, batt_temp=377
  820. [ 343.064947] adjust_soc: ibat_ua = -195800, vbat_uv = 4368264, soc = 100, batt_temp=377
  821. [ 350.641416] init: untracked pid 3833 exited
  822. [ 357.236777] auto_hotplug: CPU1 online.
  823. [ 357.238852] auto_hotplug: CPU2 online.
  824. [ 358.469159] auto_hotplug: CPU1 down.
  825. [ 358.869220] auto_hotplug: CPU2 down.
  826. [ 363.064764] adjust_soc: ibat_ua = 8400, vbat_uv = 4341822, soc = 100, batt_temp=377
  827. [ 381.596612] init: untracked pid 3970 exited
  828. [ 383.064855] adjust_soc: ibat_ua = -164600, vbat_uv = 4366482, soc = 100, batt_temp=377
  829. [ 403.064825] adjust_soc: ibat_ua = -57800, vbat_uv = 4353408, soc = 100, batt_temp=377
  830. [ 412.617091] init: untracked pid 3983 exited
  831. [ 422.513200] lm3530_backlight_off, on: 1
  832. [ 422.528368] lm3530_backlight_off, on: 0
  833. [ 422.554707] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  834. [ 422.554738] mipi_lgit_lcd_off started
  835. [ 422.684632] mipi_lgit_lcd_off finished
  836. [ 422.688020] mipi_dsi_panel_power: mipi lcd function started status = 0
  837. [ 422.690157] lm3530_backlight_off, on: 0
  838. [ 422.691225] auto_hotplug: Offlining CPUs for early suspend
  839. [ 422.691286] [Touch D]touch disable
  840. [ 422.694643] auto_hotplug: CPU3 down.
  841. [ 422.739874] dtv_pipe is not configured yet
  842. [ 423.065038] adjust_soc: ibat_ua = -219600, vbat_uv = 4375095, soc = 100, batt_temp=376
  843. [ 443.064855] adjust_soc: ibat_ua = -205400, vbat_uv = 4377174, soc = 100, batt_temp=376
  844. [ 443.435373] [Touch D]touch enable
  845. [ 443.443644] auto_hotplug: CPU1 online.
  846. [ 443.445872] mipi_dsi_panel_power: mipi lcd function started status = 1
  847. [ 443.453410] mipi_dsi_panel_power : reset start.
  848. [ 443.474164] mipi_lgit_lcd_on started
  849. [ 443.535998] mipi_lgit_lcd_on finished
  850. [ 443.540271] lm3530_backlight_on, ++ lm3530_backlight_on
  851. [ 443.665069] init: untracked pid 4016 exited
  852. [ 463.064794] adjust_soc: ibat_ua = -74300, vbat_uv = 4356678, soc = 100, batt_temp=373
  853. [ 474.611536] init: untracked pid 4047 exited
  854. [ 483.064916] adjust_soc: ibat_ua = -155000, vbat_uv = 4368264, soc = 100, batt_temp=372
  855. [ 503.064825] adjust_soc: ibat_ua = -111700, vbat_uv = 4362915, soc = 100, batt_temp=371
  856. [ 505.586418] init: untracked pid 4058 exited
  857. [ 523.065038] adjust_soc: ibat_ua = -191800, vbat_uv = 4373610, soc = 100, batt_temp=371
  858. [ 536.024721] init: untracked pid 2306 exited
  859. [ 536.358339] init: untracked pid 4075 exited
  860. [ 536.595513] init: untracked pid 4077 exited
  861. [ 543.064855] adjust_soc: ibat_ua = -206000, vbat_uv = 4376283, soc = 100, batt_temp=371
  862. [ 545.898153] lm3530_backlight_off, on: 1
  863. [ 545.927819] lm3530_backlight_off, on: 0
  864. [ 545.954707] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  865. [ 545.954738] mipi_lgit_lcd_off started
  866. [ 546.084693] mipi_lgit_lcd_off finished
  867. [ 546.087990] mipi_dsi_panel_power: mipi lcd function started status = 0
  868. [ 546.090065] lm3530_backlight_off, on: 0
  869. [ 546.090950] auto_hotplug: Offlining CPUs for early suspend
  870. [ 546.091042] [Touch D]touch disable
  871. [ 546.095742] auto_hotplug: CPU1 down.
  872. [ 546.139935] dtv_pipe is not configured yet
  873. [ 550.376682] [Touch D]touch enable
  874. [ 550.389317] mipi_dsi_panel_power: mipi lcd function started status = 1
  875. [ 550.389836] auto_hotplug: CPU1 online.
  876. [ 550.392278] mipi_dsi_panel_power : reset start.
  877. [ 550.413428] mipi_lgit_lcd_on started
  878. [ 550.475324] mipi_lgit_lcd_on finished
  879. [ 550.478406] lm3530_backlight_on, ++ lm3530_backlight_on
  880. [ 552.500900] [WLAN][711:E :SME] csrNeighborRoamNeighborLookupDOWNCallback: 2761: Neighbor Lookup DOWN indication callback called with notification 1
  881. [ 552.501083] [WLAN][711:E :SME] Switching to occupied channel list
  882. [ 552.501205] [WLAN][711:E :SME] Channel List from CFG (or) (non-)occupied list= 11
  883. [ 552.501205]
  884. [ 552.501419] [WLAN][711:E :TL ] Register into FW, now BMPS
  885. [ 552.694643] [WLAN][711:E :SME] csrNeighborRoamPerformBgScan: 1717: Channel List Address = ec5df740
  886. [ 552.694765] [WLAN][711:E :SME] csrNeighborRoamIssueBgScanRequest: 1645: csrNeighborRoamIssueBgScanRequest for Channel = 11, ChanIndex = 0
  887. [ 552.694918] [WLAN][711:E :SME] csrNeighborRoamIssueBgScanRequest: 1687: Channel List Address = ec5df740, Actual index = 0
  888. [ 552.695040] [WLAN][711:E :SME] csrNeighborRoamPerformBgScan: 1753: Completed scanning channels in Channel List: CurrChanIndex = 1, Num Channels = 1
  889. [ 552.743872] [WLAN][711:E :SME] csrNeighborRoamPrepareScanProfileFilter: 937: Filtering for SSID wanqv-2 from scan results.. SSID Length = 7
  890. [ 552.743903]
  891. [ 552.744117] [WLAN][711:E :SME] csrNeighborRoamScanRequestCallback: 1484: Get Scan Result status code 0
  892. [ 552.744239] [WLAN][711:E :SME] csrNeighborRoamProcessScanResults: 1048: Scan result: BSSID 08:60:6e:22:59:d0 (Rssi 75)
  893. [ 552.744361] [WLAN][711:E :SME] csrNeighborRoamScanRequestCallback: 1548: No candidate found after scanning in state 3..
  894. [ 552.744513] [WLAN][711:E :SME] csrNeighborRoamHandleEmptyScanResult: 1333: Registering DOWN event neighbor lookup callback with TL for RSSI = -79
  895. [ 552.744727] [WLAN][711:E :TL ] Register into FW, now BMPS
  896. [ 553.287684] apr_tal: SMD_EVENT_OPEN
  897. [ 553.334808] amp_enable: AMP_EN is set to 1
  898. [ 553.386662] auto_hotplug: CPU2 online.
  899. [ 553.388096] bcm2079x-i2c 0-a1fa: 10,29
  900. [ 553.389012] auto_hotplug: CPU3 online.
  901. [ 553.698428] bcm2079x-i2c 0-a1fa: bcm2079x_dev_unlocked_ioctl, BCMNFC_CHANGE_ADDR (fa02, 77):
  902. [ 553.698550] bcm2079x-i2c 0-a1fa: Change client device from (0x0079) flag = 0000, addr_data[9] = 69
  903. [ 553.698977] bcm2079x-i2c 0-a1fa: Change client device changed to (0x0077) flag = 0000, ret = 10
  904. [ 554.599786] auto_hotplug: CPU1 down.
  905. [ 554.938989] auto_hotplug: CPU2 down.
  906. [ 556.188554] [WLAN][711:E :SME] csrNeighborRoamNeighborLookupUPCallback: 2727: Neighbor Lookup UP indication callback called with notification 2
  907. [ 556.188768] [WLAN][711:E :TL ] Could not find entry, maybe invalid arg
  908. [ 556.188829] [WLAN][711:E :TL ] Register into FW, now BMPS
  909. [ 556.511368] SLIM_CL: skip reconfig sequence
  910. [ 556.520524] amp_enable: amp enable bypass(2)
  911. [ 556.520677] amp_enable: AMP_EN is set to 0
  912. [ 563.064855] adjust_soc: ibat_ua = -178700, vbat_uv = 4374204, soc = 100, batt_temp=370
  913. [ 583.064916] adjust_soc: ibat_ua = -183300, vbat_uv = 4377174, soc = 100, batt_temp=370
  914. [ 598.014985] lm3530_backlight_off, on: 1
  915. [ 598.061590] lm3530_backlight_off, on: 0
  916. [ 598.094643] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  917. [ 598.094674] mipi_lgit_lcd_off started
  918. [ 598.224629] mipi_lgit_lcd_off finished
  919. [ 598.227895] mipi_dsi_panel_power: mipi lcd function started status = 0
  920. [ 598.229970] lm3530_backlight_off, on: 0
  921. [ 598.230794] auto_hotplug: Offlining CPUs for early suspend
  922. [ 598.230886] [Touch D]touch disable
  923. [ 598.233877] auto_hotplug: CPU3 down.
  924. [ 598.269952] dtv_pipe is not configured yet
  925. [ 598.694643] amp_enable: AMP_EN is set to 1
  926. [ 601.891377] SLIM_CL: skip reconfig sequence
  927. [ 601.909018] amp_enable: amp enable bypass(2)
  928. [ 601.909445] amp_enable: AMP_EN is set to 0
  929. [ 603.064977] adjust_soc: ibat_ua = -131600, vbat_uv = 4370046, soc = 100, batt_temp=368
  930. [ 623.064977] adjust_soc: ibat_ua = -131100, vbat_uv = 4368759, soc = 100, batt_temp=365
  931. [ 643.064794] adjust_soc: ibat_ua = -128300, vbat_uv = 4369353, soc = 100, batt_temp=360
  932. [ 663.064916] adjust_soc: ibat_ua = -129900, vbat_uv = 4369053, soc = 100, batt_temp=357
  933. [ 683.064977] adjust_soc: ibat_ua = -125400, vbat_uv = 4369353, soc = 100, batt_temp=355
  934. [ 703.066168] adjust_soc: ibat_ua = -128800, vbat_uv = 4369947, soc = 100, batt_temp=353
  935. [ 723.064977] adjust_soc: ibat_ua = -123700, vbat_uv = 4369650, soc = 100, batt_temp=350
  936. [ 743.064977] adjust_soc: ibat_ua = -122000, vbat_uv = 4369947, soc = 100, batt_temp=348
  937. [ 763.064977] adjust_soc: ibat_ua = -119200, vbat_uv = 4370538, soc = 100, batt_temp=347
  938. [ 783.065008] adjust_soc: ibat_ua = -118500, vbat_uv = 4370244, soc = 100, batt_temp=345
  939. [ 803.064977] adjust_soc: ibat_ua = -117500, vbat_uv = 4370538, soc = 100, batt_temp=343
  940. [ 823.066198] adjust_soc: ibat_ua = -117500, vbat_uv = 4371429, soc = 100, batt_temp=342
  941. [ 843.065008] adjust_soc: ibat_ua = -112900, vbat_uv = 4370838, soc = 100, batt_temp=340
  942. [ 863.064977] adjust_soc: ibat_ua = -112400, vbat_uv = 4370538, soc = 100, batt_temp=339
  943. [ 883.064977] adjust_soc: ibat_ua = -108400, vbat_uv = 4370538, soc = 100, batt_temp=337
  944. [ 903.064855] adjust_soc: ibat_ua = -107200, vbat_uv = 4370538, soc = 100, batt_temp=336
  945. [ 908.508286] [WLAN][0:E :HDD] hdd_hard_start_xmit:Queue is Filling up.Inform TL again about pending packets
  946. [ 923.064977] adjust_soc: ibat_ua = -106600, vbat_uv = 4370538, soc = 100, batt_temp=335
  947. [ 927.366671] FPR: retry count: 0
  948. [ 943.066259] adjust_soc: ibat_ua = -106600, vbat_uv = 4371429, soc = 100, batt_temp=335
  949. [ 963.064977] adjust_soc: ibat_ua = -102600, vbat_uv = 4370838, soc = 100, batt_temp=333
  950. [ 983.066198] adjust_soc: ibat_ua = -102100, vbat_uv = 4371429, soc = 100, batt_temp=332
  951. [ 1003.064977] adjust_soc: ibat_ua = -100400, vbat_uv = 4371135, soc = 100, batt_temp=330
  952. [ 1023.066808] adjust_soc: ibat_ua = -100400, vbat_uv = 4370538, soc = 100, batt_temp=329
  953. [ 1043.064977] adjust_soc: ibat_ua = -96400, vbat_uv = 4372026, soc = 100, batt_temp=328
  954. [ 1051.021394] eoc_worker: End of Charging
  955. [ 1051.034854] PM: suspend entry 2013-02-12 10:17:51.171080306 UTC
  956. [ 1051.041202] Freezing user space processes ...
  957. [ 1051.057805] adjust_soc: ibat_ua = -3800, vbat_uv = 4353471, soc = 100, batt_temp=327
  958. [ 1051.127575] (elapsed 0.08 seconds) done.
  959. [ 1051.128185] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  960. [ 1051.147199] Suspending console(s) (use no_console_suspend to debug)
  961. [ 1051.158003] dpm_run_callback(): platform_pm_suspend+0x0/0x5c returns -16
  962. [ 1051.158034] PM: Device alarm failed to suspend: error -16
  963. [ 1051.158064] PM: Some devices failed to suspend
  964. [ 1051.172012] PM: resume of devices complete after 13.917 msecs
  965. [ 1051.176468] Restarting tasks ...
  966. [ 1051.192552] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  967. [ 1051.192980] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  968. [ 1051.193376] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  969. [ 1051.193743] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  970. [ 1051.198229] done.
  971. [ 1051.198748] PM: suspend exit 2013-02-12 10:17:51.334974710 UTC
  972. [ 1051.725560] PM: suspend entry 2013-02-12 10:17:51.861786855 UTC
  973. [ 1051.726293] Freezing user space processes ... (elapsed 0.01 seconds) done.
  974. [ 1051.997008] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  975. [ 1052.017274] Suspending console(s) (use no_console_suspend to debug)
  976. [ 1052.020936] msm_fb_ext_suspend: Turning off HPD circuitry
  977. [ 1052.033694] PM: suspend of devices complete after 15.229 msecs
  978. [ 1052.034213] PM: late suspend of devices complete after 0.518 msecs
  979. [ 1052.035495] PM: noirq suspend of devices complete after 1.281 msecs
  980. [ 1052.035495] Disabling non-boot CPUs ...
  981. [ 1052.036013] msm_pm_enter
  982. [ 1052.036013] msm_pm_enter: power collapse
  983. [ 1052.036013] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  984. [ 1052.036013] msm_pm_enter: return
  985. [ 1052.037143] PM: noirq resume of devices complete after 1.037 msecs
  986. [ 1052.038791] PM: early resume of devices complete after 0.488 msecs
  987. [ 1052.041507] msm_fb_ext_resume: Turning on HPD circuitry
  988. [ 1052.043094] PM: resume of devices complete after 4.272 msecs
  989. [ 1052.045261] Restarting tasks ...
  990. [ 1052.052098] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  991. [ 1052.052281] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  992. [ 1052.052433] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  993. [ 1052.052494] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  994. [ 1052.055974] done.
  995. [ 1052.056157] PM: suspend exit 2013-02-12 10:19:21.014343744 UTC
  996. [ 1052.143384] PM: suspend entry 2013-02-12 10:19:21.101471407 UTC
  997. [ 1052.143811] Freezing user space processes ... (elapsed 0.02 seconds) done.
  998. [ 1052.165542] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  999. [ 1052.187211] Suspending console(s) (use no_console_suspend to debug)
  1000. [ 1052.191179] msm_fb_ext_suspend: Turning off HPD circuitry
  1001. [ 1052.261193] PM: suspend of devices complete after 72.712 msecs
  1002. [ 1052.261681] PM: late suspend of devices complete after 0.457 msecs
  1003. [ 1052.262841] PM: noirq suspend of devices complete after 1.159 msecs
  1004. [ 1052.262841] Disabling non-boot CPUs ...
  1005. [ 1052.263329] msm_pm_enter
  1006. [ 1052.263329] msm_pm_enter: power collapse
  1007. [ 1052.263329] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1008. [ 1052.263329] msm_pm_enter: return
  1009. [ 1052.264428] PM: noirq resume of devices complete after 1.006 msecs
  1010. [ 1052.266076] PM: early resume of devices complete after 0.488 msecs
  1011. [ 1052.268396] msm_fb_ext_resume: Turning on HPD circuitry
  1012. [ 1052.269861] PM: resume of devices complete after 3.782 msecs
  1013. [ 1052.271814] Restarting tasks ...
  1014. [ 1052.279169] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1015. [ 1052.279261] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1016. [ 1052.279413] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1017. [ 1052.279505] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1018. [ 1052.282191] done.
  1019. [ 1052.282374] PM: suspend exit 2013-02-12 10:19:33.013665175 UTC
  1020. [ 1052.287776] PM: suspend entry 2013-02-12 10:19:33.019032845 UTC
  1021. [ 1052.287929] Freezing user space processes ... (elapsed 0.01 seconds) done.
  1022. [ 1052.305661] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  1023. [ 1052.327422] Suspending console(s) (use no_console_suspend to debug)
  1024. [ 1052.331359] msm_fb_ext_suspend: Turning off HPD circuitry
  1025. [ 1052.401403] PM: suspend of devices complete after 72.766 msecs
  1026. [ 1052.401892] PM: late suspend of devices complete after 0.487 msecs
  1027. [ 1052.403051] PM: noirq suspend of devices complete after 1.158 msecs
  1028. [ 1052.403051] Disabling non-boot CPUs ...
  1029. [ 1052.403570] msm_pm_enter
  1030. [ 1052.403570] msm_pm_enter: power collapse
  1031. [ 1052.403570] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1032. [ 1052.403570] msm_pm_enter: return
  1033. [ 1052.404669] PM: noirq resume of devices complete after 0.975 msecs
  1034. [ 1052.406287] PM: early resume of devices complete after 0.457 msecs
  1035. [ 1052.408759] msm_fb_ext_resume: Turning on HPD circuitry
  1036. [ 1052.410682] PM: resume of devices complete after 4.361 msecs
  1037. [ 1052.412879] Restarting tasks ...
  1038. [ 1052.419288] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1039. [ 1052.419471] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1040. [ 1052.419532] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1041. [ 1052.419654] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1042. [ 1052.423195] done.
  1043. [ 1052.423378] PM: suspend exit 2013-02-12 10:19:36.014211499 UTC
  1044. [ 1052.428689] PM: suspend entry 2013-02-12 10:19:36.019517436 UTC
  1045. [ 1052.428902] Freezing user space processes ... (elapsed 0.01 seconds) done.
  1046. [ 1052.697024] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  1047. [ 1052.717686] Suspending console(s) (use no_console_suspend to debug)
  1048. [ 1052.721654] msm_fb_ext_suspend: Turning off HPD circuitry
  1049. [ 1052.791637] PM: suspend of devices complete after 72.736 msecs
  1050. [ 1052.792125] PM: late suspend of devices complete after 0.488 msecs
  1051. [ 1052.793285] PM: noirq suspend of devices complete after 1.159 msecs
  1052. [ 1052.793285] Disabling non-boot CPUs ...
  1053. [ 1052.793773] msm_pm_enter
  1054. [ 1052.793773] msm_pm_enter: power collapse
  1055. [ 1052.793773] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1056. [ 1052.793773] msm_pm_enter: return
  1057. [ 1052.794872] PM: noirq resume of devices complete after 1.006 msecs
  1058. [ 1052.796520] PM: early resume of devices complete after 0.457 msecs
  1059. [ 1052.798809] msm_fb_ext_resume: Turning on HPD circuitry
  1060. [ 1052.800274] PM: resume of devices complete after 3.752 msecs
  1061. [ 1052.802197] Restarting tasks ...
  1062. [ 1052.808667] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1063. [ 1052.808789] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1064. [ 1052.808911] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1065. [ 1052.809003] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1066. [ 1052.812513] done.
  1067. [ 1052.812696] PM: suspend exit 2013-02-12 10:19:53.013577685 UTC
  1068. [ 1052.818281] PM: suspend entry 2013-02-12 10:19:53.019160487 UTC
  1069. [ 1052.818464] Freezing user space processes ... (elapsed 0.01 seconds) done.
  1070. [ 1053.087318] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  1071. [ 1053.107950] Suspending console(s) (use no_console_suspend to debug)
  1072. [ 1053.112101] msm_fb_ext_suspend: Turning off HPD circuitry
  1073. [ 1053.182969] PM: suspend of devices complete after 73.802 msecs
  1074. [ 1053.183488] PM: late suspend of devices complete after 0.518 msecs
  1075. [ 1053.184709] PM: noirq suspend of devices complete after 1.220 msecs
  1076. [ 1053.184709] Disabling non-boot CPUs ...
  1077. [ 1053.185228] msm_pm_enter
  1078. [ 1053.185228] msm_pm_enter: power collapse
  1079. [ 1053.185228] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1080. [ 1053.185228] msm_pm_enter: return
  1081. [ 1053.186418] PM: noirq resume of devices complete after 1.098 msecs
  1082. [ 1053.188280] PM: early resume of devices complete after 0.488 msecs
  1083. [ 1053.190569] msm_fb_ext_resume: Turning on HPD circuitry
  1084. [ 1053.192156] PM: resume of devices complete after 3.874 msecs
  1085. [ 1053.194292] Restarting tasks ...
  1086. [ 1053.201678] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1087. [ 1053.201861] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1088. [ 1053.201953] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1089. [ 1053.202044] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1090. [ 1053.205188] done.
  1091. [ 1053.205432] PM: suspend exit 2013-02-12 10:20:33.014553677 UTC
  1092. [ 1053.283717] FPR: retry count: 0
  1093. [ 1054.187944] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  1094. [ 1054.188066] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  1095. [ 1054.188737] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  1096. [ 1054.188920] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  1097. [ 1054.189104] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  1098. [ 1055.217427] PM: suspend entry 2013-02-12 10:20:35.025877150 UTC
  1099. [ 1055.227376] Freezing user space processes ... (elapsed 0.08 seconds) done.
  1100. [ 1055.308560] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1101. [ 1055.329223] Suspending console(s) (use no_console_suspend to debug)
  1102. [ 1055.341553] msm_fb_ext_suspend: Turning off HPD circuitry
  1103. [ 1055.354890] PM: suspend of devices complete after 21.973 msecs
  1104. [ 1055.356630] PM: late suspend of devices complete after 1.678 msecs
  1105. [ 1055.360262] PM: noirq suspend of devices complete after 3.570 msecs
  1106. [ 1055.360292] Disabling non-boot CPUs ...
  1107. [ 1055.360964] msm_pm_enter
  1108. [ 1055.360964] msm_pm_enter: power collapse
  1109. [ 1055.360964] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1110. [ 1055.360964] msm_pm_enter: return
  1111. [ 1055.364229] PM: noirq resume of devices complete after 2.655 msecs
  1112. [ 1055.368289] PM: early resume of devices complete after 1.556 msecs
  1113. [ 1055.375461] msm_fb_ext_resume: Turning on HPD circuitry
  1114. [ 1055.380222] PM: resume of devices complete after 11.901 msecs
  1115. [ 1055.386845] Restarting tasks ...
  1116. [ 1055.403723] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1117. [ 1055.404120] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1118. [ 1055.404516] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1119. [ 1055.404883] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1120. [ 1055.408942] done.
  1121. [ 1055.409491] PM: suspend exit 2013-02-12 10:21:24.032911959 UTC
  1122. [ 1055.503219] PM: suspend entry 2013-02-12 10:21:24.126565076 UTC
  1123. [ 1055.503524] Freezing user space processes ... (elapsed 0.02 seconds) done.
  1124. [ 1055.528917] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1125. [ 1055.548664] Suspending console(s) (use no_console_suspend to debug)
  1126. [ 1055.552388] msm_fb_ext_suspend: Turning off HPD circuitry
  1127. [ 1055.622127] PM: suspend of devices complete after 72.320 msecs
  1128. [ 1055.622584] PM: late suspend of devices complete after 0.427 msecs
  1129. [ 1055.623714] PM: noirq suspend of devices complete after 1.098 msecs
  1130. [ 1055.623714] Disabling non-boot CPUs ...
  1131. [ 1055.624202] msm_pm_enter
  1132. [ 1055.624202] msm_pm_enter: power collapse
  1133. [ 1055.624202] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1134. [ 1055.624202] msm_pm_enter: return
  1135. [ 1055.625270] PM: noirq resume of devices complete after 0.945 msecs
  1136. [ 1055.626827] PM: early resume of devices complete after 0.457 msecs
  1137. [ 1055.629116] msm_fb_ext_resume: Turning on HPD circuitry
  1138. [ 1055.630459] PM: resume of devices complete after 3.629 msecs
  1139. [ 1055.632320] Restarting tasks ...
  1140. [ 1055.639218] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1141. [ 1055.639371] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1142. [ 1055.639462] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1143. [ 1055.639554] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1144. [ 1055.642362] done.
  1145. [ 1055.642514] PM: suspend exit 2013-02-12 10:21:34.013147245 UTC
  1146. [ 1055.646268] PM: suspend entry 2013-02-12 10:21:34.016868723 UTC
  1147. [ 1055.646451] Freezing user space processes ... (elapsed 0.02 seconds) done.
  1148. [ 1055.667358] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1149. [ 1055.687135] Suspending console(s) (use no_console_suspend to debug)
  1150. [ 1055.690889] msm_fb_ext_suspend: Turning off HPD circuitry
  1151. [ 1055.760506] PM: suspend of devices complete after 72.186 msecs
  1152. [ 1055.760964] PM: late suspend of devices complete after 0.457 msecs
  1153. [ 1055.762063] PM: noirq suspend of devices complete after 1.097 msecs
  1154. [ 1055.762093] Disabling non-boot CPUs ...
  1155. [ 1055.762581] msm_pm_enter
  1156. [ 1055.762581] msm_pm_enter: power collapse
  1157. [ 1055.762581] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1158. [ 1055.762581] msm_pm_enter: return
  1159. [ 1055.763650] PM: noirq resume of devices complete after 0.975 msecs
  1160. [ 1055.765359] PM: early resume of devices complete after 0.426 msecs
  1161. [ 1055.767465] msm_fb_ext_resume: Turning on HPD circuitry
  1162. [ 1055.768869] PM: resume of devices complete after 3.507 msecs
  1163. [ 1055.770669] Restarting tasks ...
  1164. [ 1055.777536] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1165. [ 1055.777658] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1166. [ 1055.777781] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1167. [ 1055.777872] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1168. [ 1055.780772] done.
  1169. [ 1055.780924] PM: suspend exit 2013-02-12 10:24:02.013174589 UTC
  1170. [ 1056.027407] PM: suspend entry 2013-02-12 10:24:02.259479548 UTC
  1171. [ 1056.027987] Freezing user space processes ... (elapsed 0.01 seconds) done.
  1172. [ 1056.296932] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  1173. [ 1056.319181] Suspending console(s) (use no_console_suspend to debug)
  1174. [ 1056.322478] msm_fb_ext_suspend: Turning off HPD circuitry
  1175. [ 1056.334564] PM: suspend of devices complete after 14.275 msecs
  1176. [ 1056.335021] PM: late suspend of devices complete after 0.457 msecs
  1177. [ 1056.336120] PM: noirq suspend of devices complete after 1.098 msecs
  1178. [ 1056.336120] Disabling non-boot CPUs ...
  1179. [ 1056.336609] msm_pm_enter
  1180. [ 1056.336609] msm_pm_enter: power collapse
  1181. [ 1056.336609] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1182. [ 1056.336609] msm_pm_enter: return
  1183. [ 1056.337707] PM: noirq resume of devices complete after 0.976 msecs
  1184. [ 1056.339233] PM: early resume of devices complete after 0.457 msecs
  1185. [ 1056.341583] msm_fb_ext_resume: Turning on HPD circuitry
  1186. [ 1056.342957] PM: resume of devices complete after 3.721 msecs
  1187. [ 1056.344819] Restarting tasks ...
  1188. [ 1056.350984] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1189. [ 1056.351136] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1190. [ 1056.351197] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1191. [ 1056.351289] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1192. [ 1056.354860] done.
  1193. [ 1056.355043] PM: suspend exit 2013-02-12 10:24:21.013146638 UTC
  1194. [ 1056.360537] PM: suspend entry 2013-02-12 10:24:21.018666585 UTC
  1195. [ 1056.360750] Freezing user space processes ... (elapsed 0.01 seconds) done.
  1196. [ 1056.628780] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  1197. [ 1056.649412] Suspending console(s) (use no_console_suspend to debug)
  1198. [ 1056.653166] msm_fb_ext_suspend: Turning off HPD circuitry
  1199. [ 1056.665832] PM: suspend of devices complete after 15.162 msecs
  1200. [ 1056.666351] PM: late suspend of devices complete after 0.488 msecs
  1201. [ 1056.667633] PM: noirq suspend of devices complete after 1.250 msecs
  1202. [ 1056.667663] Disabling non-boot CPUs ...
  1203. [ 1056.668151] msm_pm_enter
  1204. [ 1056.668151] msm_pm_enter: power collapse
  1205. [ 1056.668151] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1206. [ 1056.668151] msm_pm_enter: return
  1207. [ 1056.669281] PM: noirq resume of devices complete after 1.037 msecs
  1208. [ 1056.671142] PM: early resume of devices complete after 0.488 msecs
  1209. [ 1056.673431] msm_fb_ext_resume: Turning on HPD circuitry
  1210. [ 1056.675018] PM: resume of devices complete after 3.874 msecs
  1211. [ 1056.677185] Restarting tasks ...
  1212. [ 1056.684571] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1213. [ 1056.684693] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1214. [ 1056.684846] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1215. [ 1056.684938] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1216. [ 1056.686891] done.
  1217. [ 1056.687074] PM: suspend exit 2013-02-12 10:25:18.013332425 UTC
  1218. [ 1057.669220] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  1219. [ 1057.669311] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  1220. [ 1057.669891] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  1221. [ 1057.669983] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  1222. [ 1057.670135] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  1223. [ 1058.222737] PM: suspend entry 2013-02-12 10:25:19.548367046 UTC
  1224. [ 1058.226430] Freezing user space processes ... (elapsed 0.09 seconds) done.
  1225. [ 1058.319761] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  1226. [ 1058.340668] Suspending console(s) (use no_console_suspend to debug)
  1227. [ 1058.352967] msm_fb_ext_suspend: Turning off HPD circuitry
  1228. [ 1058.366305] PM: suspend of devices complete after 21.911 msecs
  1229. [ 1058.368045] PM: late suspend of devices complete after 1.678 msecs
  1230. [ 1058.371676] PM: noirq suspend of devices complete after 3.601 msecs
  1231. [ 1058.371676] Disabling non-boot CPUs ...
  1232. [ 1058.372378] msm_pm_enter
  1233. [ 1058.372378] msm_pm_enter: power collapse
  1234. [ 1058.372378] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1235. [ 1058.372378] msm_pm_enter: return
  1236. [ 1058.375644] PM: noirq resume of devices complete after 2.655 msecs
  1237. [ 1058.380009] PM: early resume of devices complete after 1.556 msecs
  1238. [ 1058.386082] msm_fb_ext_resume: Turning on HPD circuitry
  1239. [ 1058.390782] PM: resume of devices complete after 10.711 msecs
  1240. [ 1058.397375] Restarting tasks ...
  1241. [ 1058.414497] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1242. [ 1058.415046] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1243. [ 1058.415290] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1244. [ 1058.415656] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1245. [ 1058.419868] done.
  1246. [ 1058.420540] PM: suspend exit 2013-02-12 10:30:03.033525884 UTC
  1247. [ 1058.648069] FPR: retry count: 0
  1248. [ 1058.679749] FPR: retry count: 1
  1249. [ 1059.379734] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  1250. [ 1059.379825] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  1251. [ 1059.380405] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  1252. [ 1059.380497] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  1253. [ 1059.380619] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  1254. [ 1060.220082] PM: suspend entry 2013-02-12 10:30:04.832455159 UTC
  1255. [ 1060.229818] Freezing user space processes ... (elapsed 0.07 seconds) done.
  1256. [ 1060.310575] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1257. [ 1060.331298] Suspending console(s) (use no_console_suspend to debug)
  1258. [ 1060.343628] msm_fb_ext_suspend: Turning off HPD circuitry
  1259. [ 1060.356966] PM: suspend of devices complete after 21.912 msecs
  1260. [ 1060.358675] PM: late suspend of devices complete after 1.678 msecs
  1261. [ 1060.362307] PM: noirq suspend of devices complete after 3.601 msecs
  1262. [ 1060.362337] Disabling non-boot CPUs ...
  1263. [ 1060.363009] msm_pm_enter
  1264. [ 1060.363009] msm_pm_enter: power collapse
  1265. [ 1060.363009] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1266. [ 1060.363009] msm_pm_enter: return
  1267. [ 1060.366183] PM: noirq resume of devices complete after 2.624 msecs
  1268. [ 1060.370456] PM: early resume of devices complete after 1.556 msecs
  1269. [ 1060.376438] msm_fb_ext_resume: Turning on HPD circuitry
  1270. [ 1060.380985] PM: resume of devices complete after 10.498 msecs
  1271. [ 1060.387578] Restarting tasks ...
  1272. [ 1060.404791] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1273. [ 1060.405310] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1274. [ 1060.405585] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1275. [ 1060.405920] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1276. [ 1060.410071] done.
  1277. [ 1060.410590] PM: suspend exit 2013-02-12 10:30:08.033252732 UTC
  1278. [ 1060.607599] PM: suspend entry 2013-02-12 10:30:08.230111492 UTC
  1279. [ 1060.615076] Freezing user space processes ... (elapsed 0.02 seconds) done.
  1280. [ 1060.641477] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1281. [ 1060.661101] Suspending console(s) (use no_console_suspend to debug)
  1282. [ 1060.666534] msm_fb_ext_suspend: Turning off HPD circuitry
  1283. [ 1060.738745] PM: suspend of devices complete after 76.026 msecs
  1284. [ 1060.739447] PM: late suspend of devices complete after 0.701 msecs
  1285. [ 1060.741065] PM: noirq suspend of devices complete after 1.617 msecs
  1286. [ 1060.741065] Disabling non-boot CPUs ...
  1287. [ 1060.741644] msm_pm_enter
  1288. [ 1060.741644] msm_pm_enter: power collapse
  1289. [ 1060.741644] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1290. [ 1060.741644] msm_pm_enter: return
  1291. [ 1060.743079] PM: noirq resume of devices complete after 1.281 msecs
  1292. [ 1060.745337] PM: early resume of devices complete after 0.671 msecs
  1293. [ 1060.748237] msm_fb_ext_resume: Turning on HPD circuitry
  1294. [ 1060.750343] PM: resume of devices complete after 5.003 msecs
  1295. [ 1060.753090] Restarting tasks ...
  1296. [ 1060.761208] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1297. [ 1060.761422] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1298. [ 1060.761574] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1299. [ 1060.761666] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1300. [ 1060.765298] done.
  1301. [ 1060.765542] PM: suspend exit 2013-02-12 10:30:20.016780432 UTC
  1302. [ 1060.925835] PM: suspend entry 2013-02-12 10:30:20.176969397 UTC
  1303. [ 1060.926232] Freezing user space processes ... (elapsed 0.02 seconds) done.
  1304. [ 1060.951350] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1305. [ 1060.970974] Suspending console(s) (use no_console_suspend to debug)
  1306. [ 1060.974698] msm_fb_ext_suspend: Turning off HPD circuitry
  1307. [ 1061.044498] PM: suspend of devices complete after 72.353 msecs
  1308. [ 1061.044956] PM: late suspend of devices complete after 0.457 msecs
  1309. [ 1061.046085] PM: noirq suspend of devices complete after 1.098 msecs
  1310. [ 1061.046085] Disabling non-boot CPUs ...
  1311. [ 1061.046573] msm_pm_enter
  1312. [ 1061.046573] msm_pm_enter: power collapse
  1313. [ 1061.046573] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1314. [ 1061.046573] msm_pm_enter: return
  1315. [ 1061.047642] PM: noirq resume of devices complete after 0.976 msecs
  1316. [ 1061.049351] PM: early resume of devices complete after 0.457 msecs
  1317. [ 1061.051426] msm_fb_ext_resume: Turning on HPD circuitry
  1318. [ 1061.052769] PM: resume of devices complete after 3.416 msecs
  1319. [ 1061.054631] Restarting tasks ...
  1320. [ 1061.061101] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1321. [ 1061.061193] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1322. [ 1061.061315] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1323. [ 1061.061406] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1324. [ 1061.071722] done.
  1325. [ 1061.071905] PM: suspend exit 2013-02-12 10:30:38.020193473 UTC
  1326. [ 1061.148023] [Touch D]touch enable
  1327. [ 1061.156996] auto_hotplug: CPU1 online.
  1328. [ 1061.158766] mipi_dsi_panel_power: mipi lcd function started status = 1
  1329. [ 1061.163375] mipi_dsi_panel_power : reset start.
  1330. [ 1061.184037] mipi_lgit_lcd_on started
  1331. [ 1061.239096] mipi_lgit_lcd_on finished
  1332. [ 1061.245139] lm3530_backlight_on, ++ lm3530_backlight_on
  1333. [ 1062.049076] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  1334. [ 1062.049137] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  1335. [ 1062.049351] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  1336. [ 1062.049412] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  1337. [ 1062.049534] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  1338. [ 1063.041751] adjust_soc: ibat_ua = 20400, vbat_uv = 4343397, soc = 100, batt_temp=293
  1339. [ 1063.156844] bcm2079x-i2c 0-a1fa: 10,29
  1340. [ 1063.169235] amp_enable: AMP_EN is set to 1
  1341. [ 1063.251670] auto_hotplug: CPU2 online.
  1342. [ 1063.254081] auto_hotplug: CPU3 online.
  1343. [ 1063.467938] bcm2079x-i2c 0-a1fa: bcm2079x_dev_unlocked_ioctl, BCMNFC_CHANGE_ADDR (fa02, 77):
  1344. [ 1063.467999] bcm2079x-i2c 0-a1fa: Change client device from (0x0079) flag = 0000, addr_data[9] = 69
  1345. [ 1063.468426] bcm2079x-i2c 0-a1fa: Change client device changed to (0x0077) flag = 0000, ret = 10
  1346. [ 1063.772409] chg_gone_irq_handler: chg_gone=1, usb_valid = 1
  1347. [ 1063.772501] chg_gone_irq_handler: Chg gone fsm_state=1
  1348. [ 1063.772592] chg_gone_irq_handler: schedule to check again here
  1349. [ 1063.783091] chg_gone_irq_handler: chg_gone=0, usb_valid = 0
  1350. [ 1063.783213] chg_gone_irq_handler: Chg gone fsm_state=3
  1351. [ 1063.860765] pm8xxx-led pm8xxx-led: resume red set 0
  1352. [ 1063.861132] pm8xxx-led pm8xxx-led: resume green set 0
  1353. [ 1063.861223] pm8xxx-led pm8xxx-led: resume blue set 0
  1354. [ 1063.999297] unplug_check_worker: VIN: usb_now=1300, usb_target = 1300
  1355. [ 1064.000762] msm_otg msm_otg: USB exited from low power mode
  1356. [ 1064.000884] msm_otg msm_otg: Failed notifying 0 charger type to PMIC
  1357. [ 1064.000945] msm_otg msm_otg: Avail curr from USB = 0
  1358. [ 1064.001098] msm_otg msm_otg: phy_reset: success
  1359. [ 1064.001434] unplug_usbcheck_work: usb_vin : 22124, max_voltage_mv=4360
  1360. [ 1064.112406] msm_otg msm_otg: USB in low power mode
  1361. [ 1064.229421] unplug_check_worker: Stop: chg removed reg_loop = 9, fsm = 3 ibat = 66300
  1362. [ 1064.867541] vbatdet_low_irq_handler: batt fell below resume voltage charger enabled
  1363. [ 1065.553334] auto_hotplug: CPU1 down.
  1364. [ 1065.845688] auto_hotplug: CPU2 down.
  1365. [ 1066.425667] SLIM_CL: skip reconfig sequence
  1366. [ 1066.432870] amp_enable: amp enable bypass(2)
  1367. [ 1066.433022] amp_enable: AMP_EN is set to 0
  1368. [ 1083.069494] adjust_soc: ibat_ua = 265700, vbat_uv = 4302252, soc = 100, batt_temp=295
  1369. [ 1103.069494] adjust_soc: ibat_ua = 167900, vbat_uv = 4313766, soc = 100, batt_temp=295
  1370. [ 1123.069494] adjust_soc: ibat_ua = 193600, vbat_uv = 4308450, soc = 100, batt_temp=294
  1371. [ 1134.155409] [WLAN][711:E :SME] csrNeighborRoamNeighborLookupDOWNCallback: 2761: Neighbor Lookup DOWN indication callback called with notification 1
  1372. [ 1134.155653] [WLAN][711:E :SME] Switching to occupied channel list
  1373. [ 1134.155836] [WLAN][711:E :SME] Channel List from CFG (or) (non-)occupied list= 11
  1374. [ 1134.155836]
  1375. [ 1134.156142] [WLAN][711:E :TL ] Register into FW, now BMPS
  1376. [ 1134.349336] [WLAN][711:E :SME] csrNeighborRoamPerformBgScan: 1717: Channel List Address = e8fd5b80
  1377. [ 1134.349580] [WLAN][711:E :SME] csrNeighborRoamIssueBgScanRequest: 1645: csrNeighborRoamIssueBgScanRequest for Channel = 11, ChanIndex = 0
  1378. [ 1134.349854] [WLAN][711:E :SME] csrNeighborRoamIssueBgScanRequest: 1687: Channel List Address = e8fd5b80, Actual index = 0
  1379. [ 1134.350068] [WLAN][711:E :SME] csrNeighborRoamPerformBgScan: 1753: Completed scanning channels in Channel List: CurrChanIndex = 1, Num Channels = 1
  1380. [ 1134.399053] [WLAN][711:E :SME] csrNeighborRoamPrepareScanProfileFilter: 937: Filtering for SSID wanqv-2 from scan results.. SSID Length = 7
  1381. [ 1134.399084]
  1382. [ 1134.399786] [WLAN][711:E :SME] csrNeighborRoamScanRequestCallback: 1484: Get Scan Result status code 0
  1383. [ 1134.399969] [WLAN][711:E :SME] csrNeighborRoamProcessScanResults: 1048: Scan result: BSSID 08:60:6e:22:59:d0 (Rssi 68)
  1384. [ 1134.400213] [WLAN][711:E :SME] csrNeighborRoamScanRequestCallback: 1548: No candidate found after scanning in state 3..
  1385. [ 1134.400488] [WLAN][711:E :SME] csrNeighborRoamHandleEmptyScanResult: 1333: Registering DOWN event neighbor lookup callback with TL for RSSI = -79
  1386. [ 1134.400762] [WLAN][711:E :TL ] Register into FW, now BMPS
  1387. [ 1134.985929] msm_otg msm_otg: USB exited from low power mode
  1388. [ 1134.989775] chg_gone_irq_handler: chg_gone=0, usb_valid = 1
  1389. [ 1134.990111] chg_gone_irq_handler: Chg gone fsm_state=3
  1390. [ 1134.999389] unplug_check_worker: usb_now=500, usb_target = 500
  1391. [ 1135.048099] pm8xxx-led pm8xxx-led: resume red set 0
  1392. [ 1135.049564] pm8xxx-led pm8xxx-led: resume green set 0
  1393. [ 1135.049717] pm8xxx-led pm8xxx-led: resume blue set 0
  1394. [ 1135.050175] pm8xxx-led pm8xxx-led: resume red set 0
  1395. [ 1135.050327] pm8xxx-led pm8xxx-led: resume green set 255
  1396. [ 1135.050633] pm8xxx-led pm8xxx-led: resume blue set 0
  1397. [ 1135.181718] auto_hotplug: CPU1 online.
  1398. [ 1135.183976] auto_hotplug: CPU2 online.
  1399. [ 1135.199297] unplug_check_worker: Stopping Unplug Check Worker USB == 500mA
  1400. [ 1135.709415] msm_otg msm_otg: Avail curr from USB = 1500
  1401. [ 1135.709537] msm_otg msm_otg: current: 0 -> 1500 (mA)
  1402. [ 1135.709659] pm_power_set_property_usb: usb_target_ma 1500
  1403. [ 1135.711124] msm_otg msm_otg: USB in low power mode
  1404. [ 1135.998931] [WLAN][711:E :SME] csrNeighborRoamNeighborLookupUPCallback: 2727: Neighbor Lookup UP indication callback called with notification 2
  1405. [ 1135.999053] [WLAN][711:E :TL ] Could not find entry, maybe invalid arg
  1406. [ 1135.999145] [WLAN][711:E :TL ] Register into FW, now BMPS
  1407. [ 1135.999450] unplug_check_worker: usb_now=700, usb_target = 1500
  1408. [ 1136.199481] unplug_check_worker: usb_now=850, usb_target = 1500
  1409. [ 1136.432931] auto_hotplug: CPU1 down.
  1410. [ 1136.702578] auto_hotplug: CPU2 down.
  1411. [ 1136.999419] unplug_check_worker: usb_now=900, usb_target = 1500
  1412. [ 1137.199419] unplug_check_worker: usb_now=1100, usb_target = 1500
  1413. [ 1137.999816] unplug_check_worker: usb_now=1300, usb_target = 1500
  1414. [ 1138.199725] unplug_check_worker: usb_now=1500, usb_target = 1500
  1415. [ 1143.069525] adjust_soc: ibat_ua = -203700, vbat_uv = 4368711, soc = 100, batt_temp=295
  1416. [ 1146.020570] eoc_worker: End of Charging
  1417. [ 1146.031374] adjust_soc: ibat_ua = 6800, vbat_uv = 4339251, soc = 100, batt_temp=295
  1418. [ 1163.042087] adjust_soc: ibat_ua = 4500, vbat_uv = 4337472, soc = 100, batt_temp=296
  1419. [ 1166.260857] lm3530_backlight_off, on: 1
  1420. [ 1166.290797] lm3530_backlight_off, on: 0
  1421. [ 1166.319365] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  1422. [ 1166.319395] mipi_lgit_lcd_off started
  1423. [ 1166.449290] mipi_lgit_lcd_off finished
  1424. [ 1166.452433] mipi_dsi_panel_power: mipi lcd function started status = 0
  1425. [ 1166.454234] lm3530_backlight_off, on: 0
  1426. [ 1166.454997] auto_hotplug: Offlining CPUs for early suspend
  1427. [ 1166.455089] [Touch D]touch disable
  1428. [ 1166.458812] auto_hotplug: CPU3 down.
  1429. [ 1166.494613] dtv_pipe is not configured yet
  1430. [ 1168.221150] PM: suspend entry 2013-02-12 10:32:25.168771076 UTC
  1431. [ 1168.230062] Freezing user space processes ... (elapsed 0.08 seconds) done.
  1432. [ 1168.312375] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1433. [ 1168.332549] Suspending console(s) (use no_console_suspend to debug)
  1434. [ 1168.344819] msm_fb_ext_suspend: Turning off HPD circuitry
  1435. [ 1168.358003] PM: suspend of devices complete after 21.730 msecs
  1436. [ 1168.359743] PM: late suspend of devices complete after 1.709 msecs
  1437. [ 1168.363344] PM: noirq suspend of devices complete after 3.601 msecs
  1438. [ 1168.363375] Disabling non-boot CPUs ...
  1439. [ 1168.364077] msm_pm_enter
  1440. [ 1168.364077] msm_pm_enter: power collapse
  1441. [ 1168.364077] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1442. [ 1168.364077] msm_pm_enter: return
  1443. [ 1168.367312] PM: noirq resume of devices complete after 2.655 msecs
  1444. [ 1168.373416] PM: early resume of devices complete after 2.563 msecs
  1445. [ 1168.381138] msm_fb_ext_resume: Turning on HPD circuitry
  1446. [ 1168.385594] PM: resume of devices complete after 12.143 msecs
  1447. [ 1168.392186] Restarting tasks ...
  1448. [ 1168.410956] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1449. [ 1168.411353] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1450. [ 1168.411750] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1451. [ 1168.411963] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1452. [ 1168.416328] done.
  1453. [ 1168.416847] PM: suspend exit 2013-02-12 10:32:26.034769871 UTC
  1454. [ 1168.428231] PM: suspend entry 2013-02-12 10:32:26.046174471 UTC
  1455. [ 1168.429879] Freezing user space processes ... (elapsed 0.02 seconds) done.
  1456. [ 1168.450511] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1457. [ 1168.469860] Suspending console(s) (use no_console_suspend to debug)
  1458. [ 1168.473828] msm_fb_ext_suspend: Turning off HPD circuitry
  1459. [ 1168.555165] PM: suspend of devices complete after 84.052 msecs
  1460. [ 1168.555653] PM: late suspend of devices complete after 0.487 msecs
  1461. [ 1168.556813] PM: noirq suspend of devices complete after 1.158 msecs
  1462. [ 1168.556844] Disabling non-boot CPUs ...
  1463. [ 1168.557332] msm_pm_enter
  1464. [ 1168.557332] msm_pm_enter: power collapse
  1465. [ 1168.557332] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1466. [ 1168.557332] msm_pm_enter: return
  1467. [ 1168.558431] PM: noirq resume of devices complete after 1.006 msecs
  1468. [ 1168.560262] PM: early resume of devices complete after 0.457 msecs
  1469. [ 1168.562429] msm_fb_ext_resume: Turning on HPD circuitry
  1470. [ 1168.563863] PM: resume of devices complete after 3.598 msecs
  1471. [ 1168.565847] Restarting tasks ...
  1472. [ 1168.572806] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1473. [ 1168.572989] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1474. [ 1168.573050] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1475. [ 1168.573172] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1476. [ 1168.576499] done.
  1477. [ 1168.576712] PM: suspend exit 2013-02-12 10:32:29.013999240 UTC
  1478. [ 1168.849320] PM: suspend entry 2013-02-12 10:32:29.286389505 UTC
  1479. [ 1168.849961] Freezing user space processes ... (elapsed 0.02 seconds) done.
  1480. [ 1169.121623] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1481. [ 1169.140637] Suspending console(s) (use no_console_suspend to debug)
  1482. [ 1169.143598] dpm_run_callback(): platform_pm_suspend+0x0/0x5c returns -16
  1483. [ 1169.143628] PM: Device alarm failed to suspend: error -16
  1484. [ 1169.143628] PM: Some devices failed to suspend
  1485. [ 1169.145246] PM: resume of devices complete after 1.616 msecs
  1486. [ 1169.146528] Restarting tasks ...
  1487. [ 1169.160628] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1488. [ 1169.160750] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1489. [ 1169.160872] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1490. [ 1169.160964] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1491. [ 1169.161238] done.
  1492. [ 1169.161391] PM: suspend exit 2013-02-12 10:32:29.598357328 UTC
  1493. [ 1169.561879] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  1494. [ 1169.561971] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  1495. [ 1169.562154] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  1496. [ 1169.562215] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  1497. [ 1169.562307] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  1498. [ 1174.228902] PM: suspend entry 2013-02-12 10:32:34.665488339 UTC
  1499. [ 1174.229421] Freezing user space processes ... (elapsed 0.03 seconds) done.
  1500. [ 1174.261223] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1501. [ 1174.280909] Suspending console(s) (use no_console_suspend to debug)
  1502. [ 1174.286341] msm_fb_ext_suspend: Turning off HPD circuitry
  1503. [ 1174.296993] PM: suspend of devices complete after 14.497 msecs
  1504. [ 1174.297695] PM: late suspend of devices complete after 0.701 msecs
  1505. [ 1174.299313] PM: noirq suspend of devices complete after 1.587 msecs
  1506. [ 1174.299313] Disabling non-boot CPUs ...
  1507. [ 1174.299893] msm_pm_enter
  1508. [ 1174.299893] msm_pm_enter: power collapse
  1509. [ 1174.299893] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1510. [ 1174.299893] msm_pm_enter: return
  1511. [ 1174.301358] PM: noirq resume of devices complete after 1.281 msecs
  1512. [ 1174.303402] PM: early resume of devices complete after 0.701 msecs
  1513. [ 1174.306851] msm_fb_ext_resume: Turning on HPD circuitry
  1514. [ 1174.308896] PM: resume of devices complete after 5.463 msecs
  1515. [ 1174.311704] Restarting tasks ...
  1516. [ 1174.320158] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1517. [ 1174.320372] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1518. [ 1174.320494] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1519. [ 1174.320616] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1520. [ 1174.324431] done.
  1521. [ 1174.324675] PM: suspend exit 2013-02-12 10:32:35.017394180 UTC
  1522. [ 1174.331756] PM: suspend entry 2013-02-12 10:32:35.024470747 UTC
  1523. [ 1174.331939] Freezing user space processes ... (elapsed 0.01 seconds) done.
  1524. [ 1174.350953] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1525. [ 1174.371066] Suspending console(s) (use no_console_suspend to debug)
  1526. [ 1174.374820] msm_fb_ext_suspend: Turning off HPD circuitry
  1527. [ 1174.455913] PM: suspend of devices complete after 83.652 msecs
  1528. [ 1174.456370] PM: late suspend of devices complete after 0.457 msecs
  1529. [ 1174.457469] PM: noirq suspend of devices complete after 1.097 msecs
  1530. [ 1174.457469] Disabling non-boot CPUs ...
  1531. [ 1174.457958] msm_pm_enter
  1532. [ 1174.457958] msm_pm_enter: power collapse
  1533. [ 1174.457958] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1534. [ 1174.457958] msm_pm_enter: return
  1535. [ 1174.459026] PM: noirq resume of devices complete after 0.945 msecs
  1536. [ 1174.460582] PM: early resume of devices complete after 0.487 msecs
  1537. [ 1174.462841] msm_fb_ext_resume: Turning on HPD circuitry
  1538. [ 1174.464214] PM: resume of devices complete after 3.629 msecs
  1539. [ 1174.466015] Restarting tasks ...
  1540. [ 1174.472546] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1541. [ 1174.472668] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1542. [ 1174.472790] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1543. [ 1174.472821] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1544. [ 1174.476422] done.
  1545. [ 1174.476605] PM: suspend exit 2013-02-12 10:32:41.013449786 UTC
  1546. [ 1174.480665] PM: suspend entry 2013-02-12 10:32:41.017536550 UTC
  1547. [ 1174.480817] Freezing user space processes ... (elapsed 0.01 seconds) done.
  1548. [ 1174.752357] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1549. [ 1174.770883] Suspending console(s) (use no_console_suspend to debug)
  1550. [ 1174.774210] msm_fb_ext_suspend: Turning off HPD circuitry
  1551. [ 1174.786326] PM: suspend of devices complete after 14.247 msecs
  1552. [ 1174.786754] PM: late suspend of devices complete after 0.427 msecs
  1553. [ 1174.787883] PM: noirq suspend of devices complete after 1.067 msecs
  1554. [ 1174.787883] Disabling non-boot CPUs ...
  1555. [ 1174.788371] msm_pm_enter
  1556. [ 1174.788371] msm_pm_enter: power collapse
  1557. [ 1174.788371] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1558. [ 1174.788371] msm_pm_enter: return
  1559. [ 1174.789439] PM: noirq resume of devices complete after 0.976 msecs
  1560. [ 1174.791179] PM: early resume of devices complete after 0.427 msecs
  1561. [ 1174.793254] msm_fb_ext_resume: Turning on HPD circuitry
  1562. [ 1174.794658] PM: resume of devices complete after 3.447 msecs
  1563. [ 1174.796520] Restarting tasks ...
  1564. [ 1174.803112] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1565. [ 1174.803265] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1566. [ 1174.803326] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1567. [ 1174.803418] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1568. [ 1174.806836] done.
  1569. [ 1174.807050] PM: suspend exit 2013-02-12 10:32:54.013485159 UTC
  1570. [ 1174.833206] PM: suspend entry 2013-02-12 10:32:54.039623693 UTC
  1571. [ 1174.833602] Freezing user space processes ... (elapsed 0.03 seconds) done.
  1572. [ 1174.871142] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  1573. [ 1174.892964] Suspending console(s) (use no_console_suspend to debug)
  1574. [ 1174.896688] msm_fb_ext_suspend: Turning off HPD circuitry
  1575. [ 1174.977750] PM: suspend of devices complete after 83.593 msecs
  1576. [ 1174.978177] PM: late suspend of devices complete after 0.427 msecs
  1577. [ 1174.979307] PM: noirq suspend of devices complete after 1.098 msecs
  1578. [ 1174.979307] Disabling non-boot CPUs ...
  1579. [ 1174.979795] msm_pm_enter
  1580. [ 1174.979795] msm_pm_enter: power collapse
  1581. [ 1174.979795] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1582. [ 1174.979795] msm_pm_enter: return
  1583. [ 1174.980924] PM: noirq resume of devices complete after 1.006 msecs
  1584. [ 1174.982572] PM: early resume of devices complete after 0.457 msecs
  1585. [ 1174.984617] msm_fb_ext_resume: Turning on HPD circuitry
  1586. [ 1174.986021] PM: resume of devices complete after 3.446 msecs
  1587. [ 1174.987852] Restarting tasks ...
  1588. [ 1174.994506] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1589. [ 1174.994689] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1590. [ 1174.994780] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1591. [ 1174.994841] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1592. [ 1174.998229] done.
  1593. [ 1174.998382] PM: suspend exit 2013-02-12 10:33:26.013481086 UTC
  1594. [ 1175.027559] [Touch D]touch enable
  1595. [ 1175.035434] auto_hotplug: CPU1 online.
  1596. [ 1175.036990] mipi_dsi_panel_power: mipi lcd function started status = 1
  1597. [ 1175.041293] mipi_dsi_panel_power : reset start.
  1598. [ 1175.062444] mipi_lgit_lcd_on started
  1599. [ 1175.120921] mipi_lgit_lcd_on finished
  1600. [ 1175.125072] lm3530_backlight_on, ++ lm3530_backlight_on
  1601. [ 1175.981016] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  1602. [ 1175.981138] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  1603. [ 1175.981260] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  1604. [ 1175.981382] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  1605. [ 1175.981473] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  1606. [ 1176.033907] auto_hotplug: CPU2 online.
  1607. [ 1176.036349] auto_hotplug: CPU3 online.
  1608. [ 1177.244803] auto_hotplug: CPU1 down.
  1609. [ 1177.574393] auto_hotplug: CPU2 down.
  1610. [ 1177.771219] amp_enable: AMP_EN is set to 1
  1611. [ 1177.825911] bcm2079x-i2c 0-a1fa: 10,29
  1612. [ 1177.833419] auto_hotplug: CPU1 online.
  1613. [ 1177.835647] auto_hotplug: CPU2 online.
  1614. [ 1178.136212] bcm2079x-i2c 0-a1fa: bcm2079x_dev_unlocked_ioctl, BCMNFC_CHANGE_ADDR (fa02, 77):
  1615. [ 1178.136395] bcm2079x-i2c 0-a1fa: Change client device from (0x0079) flag = 0000, addr_data[9] = 69
  1616. [ 1178.136792] bcm2079x-i2c 0-a1fa: Change client device changed to (0x0077) flag = 0000, ret = 10
  1617. [ 1179.054265] auto_hotplug: CPU1 down.
  1618. [ 1179.374728] auto_hotplug: CPU2 down.
  1619. [ 1180.733618] auto_hotplug: CPU1 online.
  1620. [ 1180.735693] auto_hotplug: CPU2 online.
  1621. [ 1180.990660] SLIM_CL: skip reconfig sequence
  1622. [ 1180.998992] amp_enable: amp enable bypass(2)
  1623. [ 1180.999114] amp_enable: AMP_EN is set to 0
  1624. [ 1181.974210] auto_hotplug: CPU1 down.
  1625. [ 1182.274622] auto_hotplug: CPU2 down.
  1626. [ 1183.043827] adjust_soc: ibat_ua = -4500, vbat_uv = 4341324, soc = 100, batt_temp=292
  1627. [ 1183.533404] auto_hotplug: CPU1 online.
  1628. [ 1183.535540] auto_hotplug: CPU2 online.
  1629. [ 1184.785716] auto_hotplug: CPU1 down.
  1630. [ 1185.076697] auto_hotplug: CPU2 down.
  1631. [ 1193.951258] amp_enable: AMP_EN is set to 1
  1632. [ 1203.043979] adjust_soc: ibat_ua = -2100, vbat_uv = 4341027, soc = 100, batt_temp=295
  1633. [ 1223.043857] adjust_soc: ibat_ua = 5600, vbat_uv = 4339842, soc = 100, batt_temp=298
  1634. [ 1243.043827] adjust_soc: ibat_ua = 44200, vbat_uv = 4338657, soc = 100, batt_temp=302
  1635. [ 1259.065710] chg_gone_irq_handler: chg_gone=1, usb_valid = 1
  1636. [ 1259.065832] chg_gone_irq_handler: Chg gone fsm_state=1
  1637. [ 1259.065954] chg_gone_irq_handler: schedule to check again here
  1638. [ 1259.133526] auto_hotplug: CPU1 online.
  1639. [ 1259.135754] auto_hotplug: CPU2 online.
  1640. [ 1259.211933] chg_gone_irq_handler: chg_gone=0, usb_valid = 0
  1641. [ 1259.212055] chg_gone_irq_handler: Chg gone fsm_state=3
  1642. [ 1259.270898] pm8xxx-led pm8xxx-led: resume red set 0
  1643. [ 1259.271051] pm8xxx-led pm8xxx-led: resume green set 0
  1644. [ 1259.271142] pm8xxx-led pm8xxx-led: resume blue set 0
  1645. [ 1260.001617] unplug_check_worker: Stop: chg removed reg_loop = 9, fsm = 3 ibat = 755400
  1646. [ 1260.002471] unplug_usbcheck_work: usb_vin : 23308, max_voltage_mv=4360
  1647. [ 1260.004699] msm_otg msm_otg: USB exited from low power mode
  1648. [ 1260.004883] msm_otg msm_otg: Failed notifying 0 charger type to PMIC
  1649. [ 1260.005157] msm_otg msm_otg: Avail curr from USB = 0
  1650. [ 1260.005401] msm_otg msm_otg: phy_reset: success
  1651. [ 1260.112925] msm_otg msm_otg: USB in low power mode
  1652. [ 1260.227254] vbatdet_low_irq_handler: batt fell below resume voltage charger enabled
  1653. [ 1260.344605] auto_hotplug: CPU1 down.
  1654. [ 1260.675202] auto_hotplug: CPU2 down.
  1655. [ 1263.071356] adjust_soc: ibat_ua = 570800, vbat_uv = 4253817, soc = 100, batt_temp=306
  1656. [ 1283.071356] adjust_soc: ibat_ua = 622500, vbat_uv = 4235802, soc = 100, batt_temp=316
  1657. [ 1303.071356] adjust_soc: ibat_ua = 753200, vbat_uv = 4206861, soc = 100, batt_temp=321
  1658. [ 1323.071386] adjust_soc: ibat_ua = 510600, vbat_uv = 4239348, soc = 99, batt_temp=325
  1659. [ 1343.071386] adjust_soc: ibat_ua = 508900, vbat_uv = 4236690, soc = 99, batt_temp=328
  1660. [ 1363.071386] adjust_soc: ibat_ua = 637800, vbat_uv = 4214541, soc = 99, batt_temp=331
  1661. [ 1378.633663] auto_hotplug: CPU1 online.
  1662. [ 1378.635617] auto_hotplug: CPU2 online.
  1663. [ 1379.884205] auto_hotplug: CPU1 down.
  1664. [ 1380.155501] auto_hotplug: CPU2 down.
  1665. [ 1381.180894] lm3530_backlight_off, on: 1
  1666. [ 1381.204669] lm3530_backlight_off, on: 0
  1667. [ 1381.231405] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  1668. [ 1381.231435] mipi_lgit_lcd_off started
  1669. [ 1381.361452] mipi_lgit_lcd_off finished
  1670. [ 1381.364504] mipi_dsi_panel_power: mipi lcd function started status = 0
  1671. [ 1381.366305] lm3530_backlight_off, on: 0
  1672. [ 1381.367098] auto_hotplug: Offlining CPUs for early suspend
  1673. [ 1381.367190] [Touch D]touch disable
  1674. [ 1381.370486] auto_hotplug: CPU3 down.
  1675. [ 1381.398260] dtv_pipe is not configured yet
  1676. [ 1383.071417] adjust_soc: ibat_ua = 112900, vbat_uv = 4290732, soc = 99, batt_temp=335
  1677. [ 1383.822035] msm_otg msm_otg: USB exited from low power mode
  1678. [ 1383.923851] [Touch D]touch enable
  1679. [ 1383.931390] auto_hotplug: CPU1 online.
  1680. [ 1383.933679] mipi_dsi_panel_power: mipi lcd function started status = 1
  1681. [ 1383.935540] mipi_dsi_panel_power : reset start.
  1682. [ 1383.956752] mipi_lgit_lcd_on started
  1683. [ 1384.011444] mipi_lgit_lcd_on finished
  1684. [ 1384.015473] lm3530_backlight_on, ++ lm3530_backlight_on
  1685. [ 1384.551563] msm_otg msm_otg: Avail curr from USB = 1500
  1686. [ 1384.551716] msm_otg msm_otg: current: 0 -> 1500 (mA)
  1687. [ 1384.551777] pm_power_set_property_usb: usb_target_ma 1500
  1688. [ 1384.553273] msm_otg msm_otg: USB in low power mode
  1689. [ 1384.559346] chg_gone_irq_handler: chg_gone=0, usb_valid = 1
  1690. [ 1384.559468] chg_gone_irq_handler: Chg gone fsm_state=3
  1691. [ 1384.572867] pm8xxx-led pm8xxx-led: resume red set 0
  1692. [ 1384.573019] pm8xxx-led pm8xxx-led: resume green set 0
  1693. [ 1384.573111] pm8xxx-led pm8xxx-led: resume blue set 0
  1694. [ 1384.574332] pm8xxx-led pm8xxx-led: resume red set 0
  1695. [ 1384.574454] pm8xxx-led pm8xxx-led: resume green set 255
  1696. [ 1384.574790] pm8xxx-led pm8xxx-led: resume blue set 0
  1697. [ 1384.923149] SLIM_CL: skip reconfig sequence
  1698. [ 1384.933282] amp_enable: amp enable bypass(2)
  1699. [ 1384.933434] amp_enable: AMP_EN is set to 0
  1700. [ 1385.001373] unplug_check_worker: usb_now=700, usb_target = 1500
  1701. [ 1385.201342] unplug_check_worker: usb_now=850, usb_target = 1500
  1702. [ 1386.001495] unplug_check_worker: usb_now=900, usb_target = 1500
  1703. [ 1386.201342] unplug_check_worker: usb_now=1100, usb_target = 1500
  1704. [ 1387.001403] unplug_check_worker: usb_now=1300, usb_target = 1500
  1705. [ 1387.201495] unplug_check_worker: usb_now=1500, usb_target = 1500
  1706. [ 1399.451243] amp_enable: AMP_EN is set to 1
  1707. [ 1399.454539] bcm2079x-i2c 0-a1fa: 10,29
  1708. [ 1399.764901] bcm2079x-i2c 0-a1fa: bcm2079x_dev_unlocked_ioctl, BCMNFC_CHANGE_ADDR (fa02, 77):
  1709. [ 1399.764962] bcm2079x-i2c 0-a1fa: Change client device from (0x0079) flag = 0000, addr_data[9] = 69
  1710. [ 1399.765389] bcm2079x-i2c 0-a1fa: Change client device changed to (0x0077) flag = 0000, ret = 10
  1711. [ 1400.633419] auto_hotplug: CPU2 online.
  1712. [ 1400.635525] auto_hotplug: CPU3 online.
  1713. [ 1401.875354] auto_hotplug: CPU1 down.
  1714. [ 1402.175675] auto_hotplug: CPU2 down.
  1715. [ 1402.660033] SLIM_CL: skip reconfig sequence
  1716. [ 1402.669189] amp_enable: amp enable bypass(2)
  1717. [ 1402.669342] amp_enable: AMP_EN is set to 0
  1718. [ 1403.071356] adjust_soc: ibat_ua = -6800, vbat_uv = 4320231, soc = 99, batt_temp=331
  1719. [ 1418.833358] auto_hotplug: CPU1 online.
  1720. [ 1418.837723] auto_hotplug: CPU2 online.
  1721. [ 1420.044162] auto_hotplug: CPU1 down.
  1722. [ 1420.384525] auto_hotplug: CPU2 down.
  1723. [ 1421.233328] auto_hotplug: CPU1 online.
  1724. [ 1421.235189] auto_hotplug: CPU2 online.
  1725. [ 1422.486128] auto_hotplug: CPU1 down.
  1726. [ 1422.778116] auto_hotplug: CPU2 down.
  1727. [ 1423.071509] adjust_soc: ibat_ua = -70300, vbat_uv = 4335339, soc = 99, batt_temp=331
  1728. [ 1429.224202] auto_hotplug: CPU1 online.
  1729. [ 1429.226796] auto_hotplug: CPU2 online.
  1730. [ 1430.480543] auto_hotplug: CPU1 down.
  1731. [ 1430.750587] auto_hotplug: CPU2 down.
  1732. [ 1443.071509] adjust_soc: ibat_ua = -314600, vbat_uv = 4375632, soc = 100, batt_temp=332
  1733. [ 1451.247794] lm3530_backlight_off, on: 1
  1734. [ 1451.274988] lm3530_backlight_off, on: 0
  1735. [ 1451.301357] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  1736. [ 1451.301388] mipi_lgit_lcd_off started
  1737. [ 1451.431313] mipi_lgit_lcd_off finished
  1738. [ 1451.435159] mipi_dsi_panel_power: mipi lcd function started status = 0
  1739. [ 1451.437265] lm3530_backlight_off, on: 0
  1740. [ 1451.439004] auto_hotplug: Offlining CPUs for early suspend
  1741. [ 1451.439340] [Touch D]touch disable
  1742. [ 1451.450175] auto_hotplug: CPU3 down.
  1743. [ 1451.493178] dtv_pipe is not configured yet
  1744. [ 1463.072821] adjust_soc: ibat_ua = -296500, vbat_uv = 4380963, soc = 100, batt_temp=331
  1745. [ 1483.072760] adjust_soc: ibat_ua = -232200, vbat_uv = 4374150, soc = 100, batt_temp=328
  1746. [ 1503.072790] adjust_soc: ibat_ua = -216900, vbat_uv = 4375335, soc = 100, batt_temp=325
  1747. [ 1523.072760] adjust_soc: ibat_ua = -210100, vbat_uv = 4375632, soc = 100, batt_temp=323
  1748. [ 1542.291042] FPR: retry count: 0
  1749. [ 1543.071722] adjust_soc: ibat_ua = -208900, vbat_uv = 4375632, soc = 100, batt_temp=322
  1750. [ 1563.072790] adjust_soc: ibat_ua = -197600, vbat_uv = 4375926, soc = 100, batt_temp=320
  1751. [ 1583.072790] adjust_soc: ibat_ua = -193000, vbat_uv = 4376814, soc = 100, batt_temp=320
  1752. [ 1603.072790] adjust_soc: ibat_ua = -189700, vbat_uv = 4376814, soc = 100, batt_temp=318
  1753. [ 1623.072821] adjust_soc: ibat_ua = -128300, vbat_uv = 4368816, soc = 100, batt_temp=317
  1754. [ 1634.095131] FPR: retry count: 0
  1755. [ 1634.127208] FPR: retry count: 1
  1756. [ 1634.159346] FPR: retry count: 2
  1757. [ 1634.166610] retry count(3) reached max, resume in tight loop
  1758. [ 1643.072760] adjust_soc: ibat_ua = -132300, vbat_uv = 4368816, soc = 100, batt_temp=316
  1759. [ 1663.072790] adjust_soc: ibat_ua = -130500, vbat_uv = 4368816, soc = 100, batt_temp=315
  1760. [ 1679.901571] [Touch D]touch enable
  1761. [ 1679.910483] auto_hotplug: CPU1 online.
  1762. [ 1679.913413] mipi_dsi_panel_power: mipi lcd function started status = 1
  1763. [ 1679.916404] mipi_dsi_panel_power : reset start.
  1764. [ 1679.937402] mipi_lgit_lcd_on started
  1765. [ 1679.999664] mipi_lgit_lcd_on finished
  1766. [ 1680.002777] lm3530_backlight_on, ++ lm3530_backlight_on
  1767. [ 1681.864245] bcm2079x-i2c 0-a1fa: 10,29
  1768. [ 1681.891225] amp_enable: AMP_EN is set to 1
  1769. [ 1681.903036] auto_hotplug: CPU2 online.
  1770. [ 1681.905234] auto_hotplug: CPU3 online.
  1771. [ 1682.174545] bcm2079x-i2c 0-a1fa: bcm2079x_dev_unlocked_ioctl, BCMNFC_CHANGE_ADDR (fa02, 77):
  1772. [ 1682.174667] bcm2079x-i2c 0-a1fa: Change client device from (0x0079) flag = 0000, addr_data[9] = 69
  1773. [ 1682.175095] bcm2079x-i2c 0-a1fa: Change client device changed to (0x0077) flag = 0000, ret = 10
  1774. [ 1683.071447] adjust_soc: ibat_ua = -135100, vbat_uv = 4366743, soc = 100, batt_temp=314
  1775. [ 1683.146772] auto_hotplug: CPU1 down.
  1776. [ 1683.447428] auto_hotplug: CPU2 down.
  1777. [ 1685.113810] SLIM_CL: skip reconfig sequence
  1778. [ 1685.122966] amp_enable: amp enable bypass(2)
  1779. [ 1685.123088] amp_enable: AMP_EN is set to 0
  1780. [ 1703.071509] adjust_soc: ibat_ua = -144200, vbat_uv = 4369410, soc = 100, batt_temp=315
  1781. [ 1723.071539] adjust_soc: ibat_ua = -176600, vbat_uv = 4376223, soc = 100, batt_temp=317
  1782. [ 1730.127910] lm3530_backlight_off, on: 1
  1783. [ 1730.155073] lm3530_backlight_off, on: 0
  1784. [ 1730.181321] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  1785. [ 1730.181351] mipi_lgit_lcd_off started
  1786. [ 1730.311338] mipi_lgit_lcd_off finished
  1787. [ 1730.314542] mipi_dsi_panel_power: mipi lcd function started status = 0
  1788. [ 1730.316557] lm3530_backlight_off, on: 0
  1789. [ 1730.318327] auto_hotplug: Offlining CPUs for early suspend
  1790. [ 1730.318540] [Touch D]touch disable
  1791. [ 1730.329863] auto_hotplug: CPU3 down.
  1792. [ 1730.379429] dtv_pipe is not configured yet
  1793. [ 1743.072760] adjust_soc: ibat_ua = -117500, vbat_uv = 4369704, soc = 100, batt_temp=317
  1794. [ 1763.072790] adjust_soc: ibat_ua = -114100, vbat_uv = 4369410, soc = 100, batt_temp=316
  1795. [ 1783.072790] adjust_soc: ibat_ua = -116900, vbat_uv = 4369410, soc = 100, batt_temp=315
  1796. [ 1803.072760] adjust_soc: ibat_ua = -115200, vbat_uv = 4369410, soc = 100, batt_temp=313
  1797. [ 1823.072790] adjust_soc: ibat_ua = -110100, vbat_uv = 4369683, soc = 100, batt_temp=312
  1798. [ 1827.303250] FPR: retry count: 0
  1799. [ 1843.072760] adjust_soc: ibat_ua = -110100, vbat_uv = 4369389, soc = 100, batt_temp=311
  1800. [ 1863.072760] adjust_soc: ibat_ua = -107300, vbat_uv = 4370574, soc = 100, batt_temp=310
  1801. [ 1883.072760] adjust_soc: ibat_ua = -107300, vbat_uv = 4370574, soc = 100, batt_temp=308
  1802. [ 1903.072821] adjust_soc: ibat_ua = -104500, vbat_uv = 4370280, soc = 100, batt_temp=308
  1803. [ 1919.734564] [Touch D]touch enable
  1804. [ 1919.742835] auto_hotplug: CPU1 online.
  1805. [ 1919.745002] mipi_dsi_panel_power: mipi lcd function started status = 1
  1806. [ 1919.748023] mipi_dsi_panel_power : reset start.
  1807. [ 1919.768685] mipi_lgit_lcd_on started
  1808. [ 1919.824843] mipi_lgit_lcd_on finished
  1809. [ 1919.828231] lm3530_backlight_on, ++ lm3530_backlight_on
  1810. [ 1923.071447] adjust_soc: ibat_ua = -92500, vbat_uv = 4365825, soc = 100, batt_temp=307
  1811. [ 1925.153364] auto_hotplug: CPU2 online.
  1812. [ 1925.155592] auto_hotplug: CPU3 online.
  1813. [ 1925.158278] bcm2079x-i2c 0-a1fa: 10,29
  1814. [ 1925.181534] amp_enable: AMP_EN is set to 1
  1815. [ 1925.468701] bcm2079x-i2c 0-a1fa: bcm2079x_dev_unlocked_ioctl, BCMNFC_CHANGE_ADDR (fa02, 77):
  1816. [ 1925.468762] bcm2079x-i2c 0-a1fa: Change client device from (0x0079) flag = 0000, addr_data[9] = 69
  1817. [ 1925.469189] bcm2079x-i2c 0-a1fa: Change client device changed to (0x0077) flag = 0000, ret = 10
  1818. [ 1926.404516] auto_hotplug: CPU1 down.
  1819. [ 1926.724644] auto_hotplug: CPU2 down.
  1820. [ 1928.400457] SLIM_CL: skip reconfig sequence
  1821. [ 1928.409766] amp_enable: amp enable bypass(2)
  1822. [ 1928.409949] amp_enable: AMP_EN is set to 0
  1823. [ 1930.883106] lm3530_backlight_off, on: 1
  1824. [ 1930.913352] lm3530_backlight_off, on: 0
  1825. [ 1930.941309] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  1826. [ 1930.941339] mipi_lgit_lcd_off started
  1827. [ 1931.071264] mipi_lgit_lcd_off finished
  1828. [ 1931.074957] mipi_dsi_panel_power: mipi lcd function started status = 0
  1829. [ 1931.077063] lm3530_backlight_off, on: 0
  1830. [ 1931.078040] auto_hotplug: Offlining CPUs for early suspend
  1831. [ 1931.078223] [Touch D]touch disable
  1832. [ 1931.082587] auto_hotplug: CPU3 down.
  1833. [ 1931.129863] dtv_pipe is not configured yet
  1834. [ 1931.431222] amp_enable: AMP_EN is set to 1
  1835. [ 1934.621760] SLIM_CL: skip reconfig sequence
  1836. [ 1934.651731] amp_enable: amp enable bypass(2)
  1837. [ 1934.652006] amp_enable: AMP_EN is set to 0
  1838. [ 1943.072760] adjust_soc: ibat_ua = -103800, vbat_uv = 4370574, soc = 100, batt_temp=308
  1839. [ 1963.071478] adjust_soc: ibat_ua = -102200, vbat_uv = 4369683, soc = 100, batt_temp=308
  1840. [ 1983.072790] adjust_soc: ibat_ua = -97000, vbat_uv = 4370871, soc = 100, batt_temp=306
  1841. [ 1996.028902] eoc_worker: End of Charging
  1842. [ 1996.035861] adjust_soc: ibat_ua = -46400, vbat_uv = 4355544, soc = 100, batt_temp=305
  1843. [ 1996.049320] PM: suspend entry 2013-02-12 10:47:07.063718284 UTC
  1844. [ 1996.051151] Freezing user space processes ... (elapsed 0.06 seconds) done.
  1845. [ 1996.114756] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1846. [ 1996.134472] Suspending console(s) (use no_console_suspend to debug)
  1847. [ 1996.141827] msm_fb_ext_suspend: Turning off HPD circuitry
  1848. [ 1996.152021] PM: suspend of devices complete after 15.473 msecs
  1849. [ 1996.152967] PM: late suspend of devices complete after 0.915 msecs
  1850. [ 1996.155104] PM: noirq suspend of devices complete after 2.075 msecs
  1851. [ 1996.155104] Disabling non-boot CPUs ...
  1852. [ 1996.155653] msm_pm_enter
  1853. [ 1996.155653] msm_pm_enter: power collapse
  1854. [ 1996.155653] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1855. [ 1996.155653] msm_pm_enter: return
  1856. [ 1996.157454] PM: noirq resume of devices complete after 1.526 msecs
  1857. [ 1996.160079] PM: early resume of devices complete after 0.915 msecs
  1858. [ 1996.167648] msm_fb_ext_resume: Turning on HPD circuitry
  1859. [ 1996.170456] PM: resume of devices complete after 10.376 msecs
  1860. [ 1996.174484] Restarting tasks ...
  1861. [ 1996.186326] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1862. [ 1996.186662] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1863. [ 1996.186784] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1864. [ 1996.186998] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1865. [ 1996.190782] done.
  1866. [ 1996.191087] PM: suspend exit 2013-02-12 10:47:37.022885112 UTC
  1867. [ 1997.163070] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  1868. [ 1997.163314] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  1869. [ 1997.164962] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  1870. [ 1997.165328] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  1871. [ 1997.165542] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  1872. [ 1998.223805] PM: suspend entry 2013-02-12 10:47:39.054964585 UTC
  1873. [ 1998.226949] Freezing user space processes ... (elapsed 0.08 seconds) done.
  1874. [ 1998.315763] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1875. [ 1998.335357] Suspending console(s) (use no_console_suspend to debug)
  1876. [ 1998.347535] msm_fb_ext_suspend: Turning off HPD circuitry
  1877. [ 1998.360903] PM: suspend of devices complete after 21.973 msecs
  1878. [ 1998.362642] PM: late suspend of devices complete after 1.709 msecs
  1879. [ 1998.366274] PM: noirq suspend of devices complete after 3.601 msecs
  1880. [ 1998.366305] Disabling non-boot CPUs ...
  1881. [ 1998.366976] msm_pm_enter
  1882. [ 1998.366976] msm_pm_enter: power collapse
  1883. [ 1998.366976] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1884. [ 1998.366976] msm_pm_enter: return
  1885. [ 1998.370211] PM: noirq resume of devices complete after 2.655 msecs
  1886. [ 1998.374576] PM: early resume of devices complete after 1.556 msecs
  1887. [ 1998.380588] msm_fb_ext_resume: Turning on HPD circuitry
  1888. [ 1998.385258] PM: resume of devices complete after 10.651 msecs
  1889. [ 1998.392156] Restarting tasks ...
  1890. [ 1998.411017] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1891. [ 1998.411566] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1892. [ 1998.411811] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1893. [ 1998.412268] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1894. [ 1998.416511] done.
  1895. [ 1998.417060] PM: suspend exit 2013-02-12 10:49:04.035540084 UTC
  1896. [ 1999.374484] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  1897. [ 1999.374606] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  1898. [ 1999.374759] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  1899. [ 1999.374881] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  1900. [ 1999.375003] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  1901. [ 2000.224507] PM: suspend entry 2013-02-12 10:49:05.842372743 UTC
  1902. [ 2000.226064] Freezing user space processes ... (elapsed 0.09 seconds) done.
  1903. [ 2000.326384] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1904. [ 2000.345826] Suspending console(s) (use no_console_suspend to debug)
  1905. [ 2000.358125] msm_fb_ext_suspend: Turning off HPD circuitry
  1906. [ 2000.371493] PM: suspend of devices complete after 21.912 msecs
  1907. [ 2000.373233] PM: late suspend of devices complete after 1.678 msecs
  1908. [ 2000.376865] PM: noirq suspend of devices complete after 3.601 msecs
  1909. [ 2000.376895] Disabling non-boot CPUs ...
  1910. [ 2000.377567] msm_pm_enter
  1911. [ 2000.377567] msm_pm_enter: power collapse
  1912. [ 2000.377567] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1913. [ 2000.377567] msm_pm_enter: return
  1914. [ 2000.380802] PM: noirq resume of devices complete after 2.624 msecs
  1915. [ 2000.384953] PM: early resume of devices complete after 1.556 msecs
  1916. [ 2000.390996] msm_fb_ext_resume: Turning on HPD circuitry
  1917. [ 2000.395818] PM: resume of devices complete after 10.803 msecs
  1918. [ 2000.402288] Restarting tasks ...
  1919. [ 2000.421730] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1920. [ 2000.422127] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1921. [ 2000.422615] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1922. [ 2000.422828] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1923. [ 2000.427346] done.
  1924. [ 2000.427864] PM: suspend exit 2013-02-12 10:49:52.035936252 UTC
  1925. [ 2001.385105] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  1926. [ 2001.385197] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  1927. [ 2001.385533] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  1928. [ 2001.385624] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  1929. [ 2001.385807] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  1930. [ 2002.225118] PM: suspend entry 2013-02-12 10:49:53.832572510 UTC
  1931. [ 2002.234548] Freezing user space processes ... (elapsed 0.07 seconds) done.
  1932. [ 2002.307187] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1933. [ 2002.326476] Suspending console(s) (use no_console_suspend to debug)
  1934. [ 2002.338745] msm_fb_ext_suspend: Turning off HPD circuitry
  1935. [ 2002.428200] PM: suspend of devices complete after 97.996 msecs
  1936. [ 2002.429787] PM: late suspend of devices complete after 1.556 msecs
  1937. [ 2002.433541] PM: noirq suspend of devices complete after 3.753 msecs
  1938. [ 2002.433572] Disabling non-boot CPUs ...
  1939. [ 2002.434274] msm_pm_enter
  1940. [ 2002.434274] msm_pm_enter: power collapse
  1941. [ 2002.434274] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1942. [ 2002.434274] msm_pm_enter: return
  1943. [ 2002.437539] PM: noirq resume of devices complete after 2.655 msecs
  1944. [ 2002.441995] PM: early resume of devices complete after 1.525 msecs
  1945. [ 2002.448160] msm_fb_ext_resume: Turning on HPD circuitry
  1946. [ 2002.452738] PM: resume of devices complete after 10.681 msecs
  1947. [ 2002.459514] Restarting tasks ...
  1948. [ 2002.478345] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1949. [ 2002.478894] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1950. [ 2002.479139] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1951. [ 2002.479505] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1952. [ 2002.483320] done.
  1953. [ 2002.483991] PM: suspend exit 2013-02-12 10:52:45.034872223 UTC
  1954. [ 2002.564077] [Touch D]touch enable
  1955. [ 2002.574576] auto_hotplug: CPU1 online.
  1956. [ 2002.576315] mipi_dsi_panel_power: mipi lcd function started status = 1
  1957. [ 2002.580161] mipi_dsi_panel_power : reset start.
  1958. [ 2002.601525] mipi_lgit_lcd_on started
  1959. [ 2002.657439] mipi_lgit_lcd_on finished
  1960. [ 2002.663268] lm3530_backlight_on, ++ lm3530_backlight_on
  1961. [ 2003.048221] adjust_soc: ibat_ua = -2800, vbat_uv = 4343397, soc = 100, batt_temp=291
  1962. [ 2003.443674] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  1963. [ 2003.443796] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  1964. [ 2003.443949] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  1965. [ 2003.444040] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  1966. [ 2003.444162] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  1967. [ 2004.289058] lm3530_backlight_off, on: 1
  1968. [ 2004.319944] lm3530_backlight_off, on: 0
  1969. [ 2004.344025] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  1970. [ 2004.344055] mipi_lgit_lcd_off started
  1971. [ 2004.473920] mipi_lgit_lcd_off finished
  1972. [ 2004.477216] mipi_dsi_panel_power: mipi lcd function started status = 0
  1973. [ 2004.479261] lm3530_backlight_off, on: 0
  1974. [ 2004.479993] auto_hotplug: Offlining CPUs for early suspend
  1975. [ 2004.480146] [Touch D]touch disable
  1976. [ 2004.482954] auto_hotplug: CPU1 down.
  1977. [ 2004.517686] dtv_pipe is not configured yet
  1978. [ 2006.225850] PM: suspend entry 2013-02-12 10:52:48.776041709 UTC
  1979. [ 2006.235433] Freezing user space processes ... (elapsed 0.08 seconds) done.
  1980. [ 2006.317899] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1981. [ 2006.337097] Suspending console(s) (use no_console_suspend to debug)
  1982. [ 2006.349396] msm_fb_ext_suspend: Turning off HPD circuitry
  1983. [ 2006.362734] PM: suspend of devices complete after 21.913 msecs
  1984. [ 2006.364443] PM: late suspend of devices complete after 1.709 msecs
  1985. [ 2006.368075] PM: noirq suspend of devices complete after 3.570 msecs
  1986. [ 2006.368105] Disabling non-boot CPUs ...
  1987. [ 2006.368777] msm_pm_enter
  1988. [ 2006.368777] msm_pm_enter: power collapse
  1989. [ 2006.368777] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  1990. [ 2006.368777] msm_pm_enter: return
  1991. [ 2006.372012] PM: noirq resume of devices complete after 2.655 msecs
  1992. [ 2006.376407] PM: early resume of devices complete after 1.556 msecs
  1993. [ 2006.382420] msm_fb_ext_resume: Turning on HPD circuitry
  1994. [ 2006.387120] PM: resume of devices complete after 10.712 msecs
  1995. [ 2006.393712] Restarting tasks ...
  1996. [ 2006.412574] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1997. [ 2006.413123] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  1998. [ 2006.413367] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  1999. [ 2006.413733] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2000. [ 2006.417976] done.
  2001. [ 2006.418525] PM: suspend exit 2013-02-12 10:53:50.035189960 UTC
  2002. [ 2006.501846] FPR: retry count: 0
  2003. [ 2007.376376] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  2004. [ 2007.376499] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  2005. [ 2007.376621] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  2006. [ 2007.376743] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  2007. [ 2007.376834] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  2008. [ 2008.911704] init: untracked pid 163 exited
  2009. [ 2008.915549] mipi_dsi_panel_power: mipi lcd function started status = 1
  2010. [ 2008.917533] mipi_dsi_panel_power : reset start.
  2011. [ 2008.984525] mipi_lgit_lcd_on started
  2012. [ 2009.022432] init: untracked pid 169 exited
  2013. [ 2009.035250] init: untracked pid 1054 exited
  2014. [ 2009.075171] init: untracked pid 903 exited
  2015. [ 2009.115244] init: untracked pid 4302 exited
  2016. [ 2009.118113] mipi_lgit_lcd_on finished
  2017. [ 2009.133404] [Touch D]touch enable
  2018. [ 2009.136578] auto_hotplug: CPU1 online.
  2019. [ 2009.545551] init: untracked pid 4533 exited
  2020. [ 2009.546253] init: untracked pid 4501 exited
  2021. [ 2009.546802] init: untracked pid 4388 exited
  2022. [ 2009.547474] init: untracked pid 5502 exited
  2023. [ 2009.548084] init: untracked pid 973 exited
  2024. [ 2009.548725] init: untracked pid 2228 exited
  2025. [ 2009.549732] init: untracked pid 4570 exited
  2026. [ 2009.549885] init: untracked pid 5488 exited
  2027. [ 2009.565298] init: untracked pid 1137 exited
  2028. [ 2009.585166] init: untracked pid 5315 exited
  2029. [ 2009.635525] init: untracked pid 1154 exited
  2030. [ 2009.655241] init: untracked pid 983 exited
  2031. [ 2009.885395] init: untracked pid 4410 exited
  2032. [ 2009.926689] init: untracked pid 829 exited
  2033. [ 2009.926842] init: untracked pid 995 exited
  2034. [ 2009.926995] init: untracked pid 5040 exited
  2035. [ 2009.927117] init: untracked pid 5372 exited
  2036. [ 2009.975461] init: untracked pid 3554 exited
  2037. [ 2010.035159] init: untracked pid 951 exited
  2038. [ 2010.136639] auto_hotplug: CPU2 online.
  2039. [ 2010.138745] auto_hotplug: CPU3 online.
  2040. [ 2010.156233] init: untracked pid 3845 exited
  2041. [ 2010.156660] init: untracked pid 5330 exited
  2042. [ 2010.157118] init: untracked pid 4612 exited
  2043. [ 2010.157637] init: untracked pid 3735 exited
  2044. [ 2010.158095] init: untracked pid 1115 exited
  2045. [ 2010.158522] init: untracked pid 1270 exited
  2046. [ 2010.158980] init: untracked pid 3948 exited
  2047. [ 2010.159407] init: untracked pid 2828 exited
  2048. [ 2010.159865] init: untracked pid 1451 exited
  2049. [ 2010.160292] init: untracked pid 4174 exited
  2050. [ 2010.160781] init: untracked pid 1403 exited
  2051. [ 2010.175278] init: untracked pid 4520 exited
  2052. [ 2010.216358] init: untracked pid 4766 exited
  2053. [ 2010.346436] init: untracked pid 1822 exited
  2054. [ 2011.347779] auto_hotplug: CPU1 down.
  2055. [ 2011.677399] auto_hotplug: CPU2 down.
  2056. [ 2014.235067] pm8xxx-led pm8xxx-led: resume red set 0
  2057. [ 2014.235189] pm8xxx-led pm8xxx-led: resume green set 0
  2058. [ 2014.235281] pm8xxx-led pm8xxx-led: resume blue set 0
  2059. [ 2014.235769] pm8xxx-led pm8xxx-led: resume red set 0
  2060. [ 2014.235861] pm8xxx-led pm8xxx-led: resume green set 255
  2061. [ 2014.236227] pm8xxx-led pm8xxx-led: resume blue set 0
  2062. [ 2014.421669] lowmem_shrink: convert oom_adj to oom_score_adj:
  2063. [ 2014.421791] oom_adj 0 => oom_score_adj 0
  2064. [ 2014.421852] oom_adj 1 => oom_score_adj 58
  2065. [ 2014.421913] oom_adj 2 => oom_score_adj 117
  2066. [ 2014.422004] oom_adj 4 => oom_score_adj 235
  2067. [ 2014.422065] oom_adj 9 => oom_score_adj 529
  2068. [ 2014.422096] oom_adj 15 => oom_score_adj 1000
  2069. [ 2014.532519] EXT4-fs (dm-9): re-mounted. Opts: (null)
  2070. [ 2014.544971] EXT4-fs (dm-9): re-mounted. Opts: (null)
  2071. [ 2014.557240] EXT4-fs (dm-10): re-mounted. Opts: (null)
  2072. [ 2014.571676] EXT4-fs (dm-10): re-mounted. Opts: (null)
  2073. [ 2014.584709] EXT4-fs (dm-1): re-mounted. Opts: (null)
  2074. [ 2014.589195] EXT4-fs (dm-1): re-mounted. Opts: (null)
  2075. [ 2014.623286] EXT4-fs (dm-3): re-mounted. Opts: (null)
  2076. [ 2014.628139] wlan: unloading driver v3.2.1.13
  2077. [ 2014.628200] [WLAN][5823:E :HDD] wlan_hdd_restart_deinit: 4655: Failed to stop HDD restart timer
  2078. [ 2014.628231]
  2079. [ 2014.632534] EXT4-fs (dm-3): re-mounted. Opts: (null)
  2080. [ 2014.637173] [WLAN][5823:E :SME] csrRoamIssueDisassociateCmd: 6050: reason = 0
  2081. [ 2014.637173]
  2082. [ 2014.637295] [WLAN][5823:E :SME] csrRoamProcessDisassocDeauth: 5970: restore AC weights (1-3-5-7)
  2083. [ 2014.637295]
  2084. [ 2014.637478] [WLAN][5823:E :SME] csrRoamIssueDisassociate: 1946: restore AC weights (1-3-5-7)
  2085. [ 2014.637478]
  2086. [ 2014.637631] [WLAN][5823:E :SME] csrNeighborRoamIndicateDisconnect: 2798: Disconnect indication on session 0 in state 2 (sub-state 12)
  2087. [ 2014.637753] [WLAN][5823:E :SME] csrNeighborRoamIndicateDisconnect: 2865: Received disconnect event in state 2
  2088. [ 2014.637845] [WLAN][5823:E :SME] csrNeighborRoamIndicateDisconnect: 2866: Transitioning to INIT state
  2089. [ 2014.637967] [WLAN][5823:E :SME] sme_QosDeleteBufferedRequests: 6306: Buffered List empty, nothing to delete on session 0
  2090. [ 2014.638058] [WLAN][5823:E :SME] sme_QosDeleteExistingFlows: 6086: Flow List empty, nothing to delete
  2091. [ 2014.664184] [WLAN][711:E :SME] csrRoamingStateMsgProcessor: 7249: eWNI_SME_DISASSOC_RSP subState = 12
  2092. [ 2014.664184]
  2093. [ 2014.664397] wlan: disconnected
  2094. [ 2014.664550] [WLAN][711:E :SME] sme_QosDeleteBufferedRequests: 6306: Buffered List empty, nothing to delete on session 0
  2095. [ 2014.664672] [WLAN][711:E :SME] sme_QosDeleteExistingFlows: 6086: Flow List empty, nothing to delete
  2096. [ 2014.664794] [WLAN][711:E :SME] csrNeighborRoamIndicateDisconnect: 2798: Disconnect indication on session 0 in state 1 (sub-state 0)
  2097. [ 2014.664886] [WLAN][711:E :TL ] Could not find entry, maybe invalid arg
  2098. [ 2014.664977] [WLAN][711:E :TL ] Could not find entry, maybe invalid arg
  2099. [ 2014.667968] [3:5823:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  2100. [ 2014.677429] [WLAN][5823:E :SME] csrNeighborRoamClose: 3246: Neighbor Roam Algorithm Already Closed
  2101. [ 2014.677429]
  2102. [ 2014.677674] [WLAN][5823:E :SME] sme_QosDeleteBufferedRequests: 6306: Buffered List empty, nothing to delete on session 0
  2103. [ 2014.677796] [WLAN][5823:E :SME] sme_QosDeleteExistingFlows: 6086: Flow List empty, nothing to delete
  2104. [ 2014.677857] [WLAN][5823:E :SME] sme_QosDeleteBufferedRequests: 6306: Buffered List empty, nothing to delete on session 1
  2105. [ 2014.677948] [WLAN][5823:E :SME] sme_QosDeleteExistingFlows: 6086: Flow List empty, nothing to delete
  2106. [ 2014.678070] [WLAN][5823:E :SME] sme_QosDeleteBufferedRequests: 6306: Buffered List empty, nothing to delete on session 2
  2107. [ 2014.678192] [WLAN][5823:E :SME] sme_QosDeleteExistingFlows: 6086: Flow List empty, nothing to delete
  2108. [ 2014.678284] [WLAN][5823:E :SME] sme_QosDeleteBufferedRequests: 6306: Buffered List empty, nothing to delete on session 3
  2109. [ 2014.678406] [WLAN][5823:E :SME] sme_QosDeleteExistingFlows: 6086: Flow List empty, nothing to delete
  2110. [ 2014.678498] [WLAN][5823:E :SME] sme_QosDeleteBufferedRequests: 6306: Buffered List empty, nothing to delete on session 4
  2111. [ 2014.678620] [WLAN][5823:E :SME] sme_QosDeleteExistingFlows: 6086: Flow List empty, nothing to delete
  2112. [ 2014.686952] EXT4-fs (dm-11): re-mounted. Opts: (null)
  2113. [ 2014.702670] EXT4-fs (dm-11): re-mounted. Opts: (null)
  2114. [ 2014.715824] EXT4-fs (dm-2): re-mounted. Opts: (null)
  2115. [ 2014.732854] EXT4-fs (dm-2): re-mounted. Opts: (null)
  2116. [ 2014.737921] cfg80211: Calling CRDA to update world regulatory domain
  2117. [ 2014.748420] EXT4-fs (dm-0): re-mounted. Opts: (null)
  2118. [ 2014.777078] EXT4-fs (dm-0): re-mounted. Opts: (null)
  2119. [ 2014.788646] EXT4-fs (dm-6): re-mounted. Opts: (null)
  2120. [ 2014.803692] EXT4-fs (dm-6): re-mounted. Opts: (null)
  2121. [ 2014.819197] EXT4-fs (dm-7): re-mounted. Opts: (null)
  2122. [ 2014.834548] EXT4-fs (dm-7): re-mounted. Opts: (null)
  2123. [ 2014.844223] EXT4-fs (dm-8): re-mounted. Opts: (null)
  2124. [ 2014.866015] EXT4-fs (dm-8): re-mounted. Opts: (null)
  2125. [ 2014.877368] EXT4-fs (dm-5): re-mounted. Opts: (null)
  2126. [ 2014.892934] EXT4-fs (dm-5): re-mounted. Opts: (null)
  2127. [ 2014.893086] wlan: driver unloaded
  2128. [ 2014.904043] EXT4-fs (dm-4): re-mounted. Opts: (null)
  2129. [ 2014.910361] EXT4-fs (dm-4): re-mounted. Opts: (null)
  2130. [ 2015.094521] wlan: loading driver v3.2.1.13
  2131. [ 2015.096810] [WLAN][5823:E :VOS] vos_lock_init: already initialized lock
  2132. [ 2015.104562] [WLAN][5823:E :SME] csrOpen: 326: country Code from nvRam USI
  2133. [ 2015.104593]
  2134. [ 2015.107034] [0:5823:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  2135. [ 2015.112345] [0:5954:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  2136. [ 2015.113016] [0:5954:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  2137. [ 2015.114786] [0:5954:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  2138. [ 2015.115427] [0:5954:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  2139. [ 2015.117167] [0:5954:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  2140. [ 2015.117808] [0:5954:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  2141. [ 2015.119517] [0:5954:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  2142. [ 2015.121226] [0:5954:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  2143. [ 2015.121898] [0:5954:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  2144. [ 2015.124583] [0:5823:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  2145. [ 2015.283411] wlan: WCNSS WLAN version 1.3.1.0
  2146. [ 2015.283503] wlan: WCNSS software version AAAAAANAAW122023
  2147. [ 2015.283625] wlan: WCNSS hardware version WCN v2.0 IRIS v2.0 with 48MHz XO
  2148. [ 2015.283686] [0:5823:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
  2149. [ 2015.288875] [WLAN][730:E :SME] PMC: STA not associated with an AP with single active session. BMPS cannot be entered
  2150. [ 2015.288875]
  2151. [ 2015.289424] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  2152. [ 2015.299190] [WLAN][5823:E :HDD] In module init: Ensure Force XO Core is OFF when WLAN is turned ON so Core toggles unless we enter PS
  2153. [ 2015.299190]
  2154. [ 2015.299343] wlan: driver loaded
  2155. [ 2015.315427] [WLAN][730:E :SME] PMC: STA not associated with an AP with single active session. BMPS cannot be entered
  2156. [ 2015.315427]
  2157. [ 2015.316007] ADDRCONF(NETDEV_UP): p2p0: link is not ready
  2158. [ 2015.449778] acc_open
  2159. [ 2015.449839] acc_release
  2160. [ 2015.837478] auto_hotplug: CPU1 online.
  2161. [ 2015.839767] auto_hotplug: CPU2 online.
  2162. [ 2017.333038] bcm2079x-i2c 0-a1fa: 10,29
  2163. [ 2017.643338] bcm2079x-i2c 0-a1fa: bcm2079x_dev_unlocked_ioctl, BCMNFC_CHANGE_ADDR (fa02, 77):
  2164. [ 2017.643460] bcm2079x-i2c 0-a1fa: Change client device from (0x0079) flag = 0000, addr_data[9] = 69
  2165. [ 2017.643888] bcm2079x-i2c 0-a1fa: Change client device changed to (0x0077) flag = 0000, ret = 10
  2166. [ 2020.515488] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
  2167. [ 2023.047184] adjust_soc: ibat_ua = 226600, vbat_uv = 4299552, soc = 100, batt_temp=291
  2168. [ 2026.280207] auto_hotplug: CPU1 down.
  2169. [ 2026.637082] auto_hotplug: CPU1 online.
  2170. [ 2027.847947] auto_hotplug: CPU1 down.
  2171. [ 2028.178299] auto_hotplug: CPU2 down.
  2172. [ 2034.437417] auto_hotplug: CPU1 online.
  2173. [ 2034.439706] auto_hotplug: CPU2 online.
  2174. [ 2036.848618] auto_hotplug: CPU1 down.
  2175. [ 2036.887898] auto_hotplug: CPU1 online.
  2176. [ 2037.015076] init: untracked pid 7385 exited
  2177. [ 2037.019288] init: untracked pid 7401 exited
  2178. [ 2037.019410] init: untracked pid 7387 exited
  2179. [ 2037.024873] init: untracked pid 7357 exited
  2180. [ 2037.024995] init: untracked pid 7392 exited
  2181. [ 2037.026552] init: untracked pid 7402 exited
  2182. [ 2037.034640] init: untracked pid 7368 exited
  2183. [ 2037.036776] init: untracked pid 7364 exited
  2184. [ 2037.036929] init: untracked pid 7373 exited
  2185. [ 2039.549610] init: untracked pid 7376 exited
  2186. [ 2039.575034] init: untracked pid 7359 exited
  2187. [ 2039.583884] init: untracked pid 7367 exited
  2188. [ 2039.604730] init: untracked pid 7371 exited
  2189. [ 2039.640927] init: untracked pid 7390 exited
  2190. [ 2039.653227] init: untracked pid 7399 exited
  2191. [ 2039.675415] init: untracked pid 7409 exited
  2192. [ 2039.680359] init: untracked pid 7394 exited
  2193. [ 2039.682557] init: untracked pid 7407 exited
  2194. [ 2039.869891] init: untracked pid 7560 exited
  2195. [ 2040.082557] init: untracked pid 7562 exited
  2196. [ 2040.092232] init: untracked pid 7582 exited
  2197. [ 2040.330504] init: untracked pid 7585 exited
  2198. [ 2043.047672] adjust_soc: ibat_ua = 348800, vbat_uv = 4251264, soc = 100, batt_temp=299
  2199. [ 2044.098183] auto_hotplug: CPU1 down.
  2200. [ 2044.428200] auto_hotplug: CPU2 down.
  2201. [ 2045.187242] auto_hotplug: CPU1 online.
  2202. [ 2045.189439] auto_hotplug: CPU2 online.
  2203. [ 2046.408606] auto_hotplug: CPU1 down.
  2204. [ 2046.738806] auto_hotplug: CPU2 down.
  2205. [ 2050.799633] lm3530_backlight_off, on: 0
  2206. [ 2050.835342] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  2207. [ 2050.835372] mipi_lgit_lcd_off started
  2208. [ 2050.887806] auto_hotplug: CPU1 online.
  2209. [ 2050.890156] auto_hotplug: CPU2 online.
  2210. [ 2050.965420] mipi_lgit_lcd_off finished
  2211. [ 2050.968502] mipi_dsi_panel_power: mipi lcd function started status = 0
  2212. [ 2050.970486] lm3530_backlight_off, on: 0
  2213. [ 2050.971890] auto_hotplug: Offlining CPUs for early suspend
  2214. [ 2050.972165] [Touch D]touch disable
  2215. [ 2050.975766] auto_hotplug: CPU1 down.
  2216. [ 2050.979490] auto_hotplug: CPU2 down.
  2217. [ 2050.991576] auto_hotplug: CPU3 down.
  2218. [ 2050.999236] dtv_pipe is not configured yet
  2219. [ 2059.227590] PM: suspend entry 2013-02-12 10:54:41.495972535 UTC
  2220. [ 2059.230306] Freezing user space processes ... (elapsed 0.02 seconds) done.
  2221. [ 2059.463207] FPR: retry count: 0
  2222. [ 2059.495375] FPR: retry count: 1
  2223. [ 2059.505233] Freezing remaining freezable tasks ...
  2224. [ 2059.506607] Freezing of tasks aborted
  2225. [ 2059.506790]
  2226. [ 2059.506882] Restarting kernel threads ... done.
  2227. [ 2059.507736] Restarting tasks ...
  2228. [ 2059.516282] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2229. [ 2059.516496] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2230. [ 2059.516679] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2231. [ 2059.516801] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2232. [ 2059.519883] done.
  2233. [ 2059.520311] PM: suspend exit 2013-02-12 10:54:41.788662908 UTC
  2234. [ 2062.237204] PM: suspend entry 2013-02-12 10:54:44.505555932 UTC
  2235. [ 2062.239157] Freezing user space processes ... (elapsed 0.06 seconds) done.
  2236. [ 2062.308347] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2237. [ 2062.328368] Suspending console(s) (use no_console_suspend to debug)
  2238. [ 2062.340698] msm_fb_ext_suspend: Turning off HPD circuitry
  2239. [ 2062.358797] PM: suspend of devices complete after 26.705 msecs
  2240. [ 2062.360384] PM: late suspend of devices complete after 1.556 msecs
  2241. [ 2062.364016] PM: noirq suspend of devices complete after 3.570 msecs
  2242. [ 2062.364046] Disabling non-boot CPUs ...
  2243. [ 2062.364718] msm_pm_enter
  2244. [ 2062.364718] msm_pm_enter: power collapse
  2245. [ 2062.364718] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2246. [ 2062.364718] msm_pm_enter: return
  2247. [ 2062.368075] PM: noirq resume of devices complete after 2.655 msecs
  2248. [ 2062.372073] PM: early resume of devices complete after 1.556 msecs
  2249. [ 2062.378238] msm_fb_ext_resume: Turning on HPD circuitry
  2250. [ 2062.382877] PM: resume of devices complete after 10.800 msecs
  2251. [ 2062.389714] Restarting tasks ...
  2252. [ 2062.406561] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2253. [ 2062.407110] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2254. [ 2062.407355] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2255. [ 2062.407721] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2256. [ 2062.413245] done.
  2257. [ 2062.413947] PM: suspend exit 2013-02-12 10:54:45.034769524 UTC
  2258. [ 2063.052799] adjust_soc: ibat_ua = 1000, vbat_uv = 4341918, soc = 100, batt_temp=304
  2259. [ 2063.377750] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  2260. [ 2063.377811] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  2261. [ 2063.377994] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  2262. [ 2063.378055] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  2263. [ 2063.378177] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  2264. [ 2064.237722] PM: suspend entry 2013-02-12 10:54:46.857932980 UTC
  2265. [ 2064.247367] Freezing user space processes ... (elapsed 0.08 seconds) done.
  2266. [ 2064.329467] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2267. [ 2064.349183] Suspending console(s) (use no_console_suspend to debug)
  2268. [ 2064.361544] msm_fb_ext_suspend: Turning off HPD circuitry
  2269. [ 2064.374942] PM: suspend of devices complete after 22.034 msecs
  2270. [ 2064.376682] PM: late suspend of devices complete after 1.678 msecs
  2271. [ 2064.380314] PM: noirq suspend of devices complete after 3.601 msecs
  2272. [ 2064.380344] Disabling non-boot CPUs ...
  2273. [ 2064.381016] msm_pm_enter
  2274. [ 2064.381016] msm_pm_enter: power collapse
  2275. [ 2064.381016] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2276. [ 2064.381016] msm_pm_enter: return
  2277. [ 2064.384251] PM: noirq resume of devices complete after 2.655 msecs
  2278. [ 2064.388615] PM: early resume of devices complete after 1.556 msecs
  2279. [ 2064.394658] msm_fb_ext_resume: Turning on HPD circuitry
  2280. [ 2064.399419] PM: resume of devices complete after 10.773 msecs
  2281. [ 2064.406256] Restarting tasks ...
  2282. [ 2064.422676] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2283. [ 2064.423195] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2284. [ 2064.423469] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2285. [ 2064.423805] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2286. [ 2064.429299] done.
  2287. [ 2064.430001] PM: suspend exit 2013-02-12 10:54:50.034380618 UTC
  2288. [ 2064.456828] PM: suspend entry 2013-02-12 10:54:50.061215321 UTC
  2289. [ 2064.457255] Freezing user space processes ... (elapsed 0.03 seconds) done.
  2290. [ 2064.496901] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  2291. [ 2064.518510] Suspending console(s) (use no_console_suspend to debug)
  2292. [ 2064.522447] msm_fb_ext_suspend: Turning off HPD circuitry
  2293. [ 2064.592430] PM: suspend of devices complete after 72.678 msecs
  2294. [ 2064.592919] PM: late suspend of devices complete after 0.488 msecs
  2295. [ 2064.594078] PM: noirq suspend of devices complete after 1.159 msecs
  2296. [ 2064.594078] Disabling non-boot CPUs ...
  2297. [ 2064.594567] msm_pm_enter
  2298. [ 2064.594567] msm_pm_enter: power collapse
  2299. [ 2064.594567] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2300. [ 2064.594567] msm_pm_enter: return
  2301. [ 2064.595665] PM: noirq resume of devices complete after 1.006 msecs
  2302. [ 2064.597497] PM: early resume of devices complete after 0.457 msecs
  2303. [ 2064.599694] msm_fb_ext_resume: Turning on HPD circuitry
  2304. [ 2064.601159] PM: resume of devices complete after 3.660 msecs
  2305. [ 2064.603173] Restarting tasks ...
  2306. [ 2064.611475] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2307. [ 2064.611628] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2308. [ 2064.611750] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2309. [ 2064.611811] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2310. [ 2064.613947] done.
  2311. [ 2064.614100] PM: suspend exit 2013-02-12 10:54:55.014122063 UTC
  2312. [ 2064.637051] PM: suspend entry 2013-02-12 10:54:55.037023297 UTC
  2313. [ 2064.637356] Freezing user space processes ... (elapsed 0.04 seconds) done.
  2314. [ 2064.678711] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2315. [ 2064.698611] Suspending console(s) (use no_console_suspend to debug)
  2316. [ 2064.702609] msm_fb_ext_suspend: Turning off HPD circuitry
  2317. [ 2064.761238] PM: suspend of devices complete after 61.360 msecs
  2318. [ 2064.761727] PM: late suspend of devices complete after 0.457 msecs
  2319. [ 2064.762917] PM: noirq suspend of devices complete after 1.128 msecs
  2320. [ 2064.762917] Disabling non-boot CPUs ...
  2321. [ 2064.763405] msm_pm_enter
  2322. [ 2064.763405] msm_pm_enter: power collapse
  2323. [ 2064.763405] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2324. [ 2064.763405] msm_pm_enter: return
  2325. [ 2064.764504] PM: noirq resume of devices complete after 1.006 msecs
  2326. [ 2064.766122] PM: early resume of devices complete after 0.457 msecs
  2327. [ 2064.768380] msm_fb_ext_resume: Turning on HPD circuitry
  2328. [ 2064.769876] PM: resume of devices complete after 3.720 msecs
  2329. [ 2064.771890] Restarting tasks ...
  2330. [ 2064.778299] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2331. [ 2064.778452] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2332. [ 2064.778543] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2333. [ 2064.778635] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2334. [ 2064.786143] done.
  2335. [ 2064.786387] PM: suspend exit 2013-02-12 10:54:55.186243830 UTC
  2336. [ 2065.768624] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  2337. [ 2065.768991] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  2338. [ 2065.770425] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  2339. [ 2065.770791] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  2340. [ 2065.771005] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  2341. [ 2067.238699] PM: suspend entry 2013-02-12 10:54:57.637906821 UTC
  2342. [ 2067.240591] Freezing user space processes ... (elapsed 0.06 seconds) done.
  2343. [ 2067.309110] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  2344. [ 2067.330169] Suspending console(s) (use no_console_suspend to debug)
  2345. [ 2067.342407] msm_fb_ext_suspend: Turning off HPD circuitry
  2346. [ 2067.409064] PM: suspend of devices complete after 75.322 msecs
  2347. [ 2067.410681] PM: late suspend of devices complete after 1.556 msecs
  2348. [ 2067.414313] PM: noirq suspend of devices complete after 3.601 msecs
  2349. [ 2067.414344] Disabling non-boot CPUs ...
  2350. [ 2067.415015] msm_pm_enter
  2351. [ 2067.415015] msm_pm_enter: power collapse
  2352. [ 2067.415015] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2353. [ 2067.415015] msm_pm_enter: return
  2354. [ 2067.418403] PM: noirq resume of devices complete after 2.838 msecs
  2355. [ 2067.422401] PM: early resume of devices complete after 1.525 msecs
  2356. [ 2067.428627] msm_fb_ext_resume: Turning on HPD circuitry
  2357. [ 2067.433266] PM: resume of devices complete after 10.834 msecs
  2358. [ 2067.439920] Restarting tasks ...
  2359. [ 2067.456615] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2360. [ 2067.457286] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2361. [ 2067.457652] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2362. [ 2067.460399] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2363. [ 2067.463634] done.
  2364. [ 2067.464184] PM: suspend exit 2013-02-12 10:54:58.034640539 UTC
  2365. [ 2068.428658] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  2366. [ 2068.429055] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  2367. [ 2068.429512] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  2368. [ 2068.429879] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  2369. [ 2068.430214] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  2370. [ 2069.239371] PM: suspend entry 2013-02-12 10:54:59.809196456 UTC
  2371. [ 2069.247794] Freezing user space processes ... (elapsed 0.07 seconds) done.
  2372. [ 2069.321104] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2373. [ 2069.340546] Suspending console(s) (use no_console_suspend to debug)
  2374. [ 2069.352937] msm_fb_ext_suspend: Turning off HPD circuitry
  2375. [ 2069.419532] PM: suspend of devices complete after 75.228 msecs
  2376. [ 2069.421119] PM: late suspend of devices complete after 1.556 msecs
  2377. [ 2069.424751] PM: noirq suspend of devices complete after 3.601 msecs
  2378. [ 2069.424782] Disabling non-boot CPUs ...
  2379. [ 2069.425484] msm_pm_enter
  2380. [ 2069.425484] msm_pm_enter: power collapse
  2381. [ 2069.425484] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2382. [ 2069.425484] msm_pm_enter: return
  2383. [ 2069.428902] PM: noirq resume of devices complete after 2.838 msecs
  2384. [ 2069.433175] PM: early resume of devices complete after 1.525 msecs
  2385. [ 2069.439401] msm_fb_ext_resume: Turning on HPD circuitry
  2386. [ 2069.443979] PM: resume of devices complete after 10.771 msecs
  2387. [ 2069.450571] Restarting tasks ...
  2388. [ 2069.467144] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2389. [ 2069.467663] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2390. [ 2069.468029] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2391. [ 2069.470807] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2392. [ 2069.473828] done.
  2393. [ 2069.474377] PM: suspend exit 2013-02-12 10:55:04.034039386 UTC
  2394. [ 2069.548359] FPR: retry count: 0
  2395. [ 2069.579612] FPR: retry count: 1
  2396. [ 2070.439340] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  2397. [ 2070.439706] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  2398. [ 2070.441232] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  2399. [ 2070.441599] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  2400. [ 2070.441934] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  2401. [ 2073.230031] PM: suspend entry 2013-02-12 10:55:07.789039791 UTC
  2402. [ 2073.238455] Freezing user space processes ... (elapsed 0.07 seconds) done.
  2403. [ 2073.311765] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2404. [ 2073.331298] Suspending console(s) (use no_console_suspend to debug)
  2405. [ 2073.343567] msm_fb_ext_suspend: Turning off HPD circuitry
  2406. [ 2073.410163] PM: suspend of devices complete after 75.141 msecs
  2407. [ 2073.411750] PM: late suspend of devices complete after 1.556 msecs
  2408. [ 2073.415382] PM: noirq suspend of devices complete after 3.570 msecs
  2409. [ 2073.415412] Disabling non-boot CPUs ...
  2410. [ 2073.416083] msm_pm_enter
  2411. [ 2073.416083] msm_pm_enter: power collapse
  2412. [ 2073.416083] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2413. [ 2073.416083] msm_pm_enter: return
  2414. [ 2073.419471] PM: noirq resume of devices complete after 2.807 msecs
  2415. [ 2073.423469] PM: early resume of devices complete after 1.556 msecs
  2416. [ 2073.429604] msm_fb_ext_resume: Turning on HPD circuitry
  2417. [ 2073.434274] PM: resume of devices complete after 10.743 msecs
  2418. [ 2073.440591] Restarting tasks ...
  2419. [ 2073.457530] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2420. [ 2073.457927] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2421. [ 2073.458385] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2422. [ 2073.458598] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2423. [ 2073.464397] done.
  2424. [ 2073.464916] PM: suspend exit 2013-02-12 10:55:08.034396450 UTC
  2425. [ 2074.430031] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  2426. [ 2074.430275] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  2427. [ 2074.431863] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  2428. [ 2074.432076] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  2429. [ 2074.432442] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  2430. [ 2075.240713] PM: suspend entry 2013-02-12 10:55:09.809566946 UTC
  2431. [ 2075.250388] Freezing user space processes ... (elapsed 0.07 seconds) done.
  2432. [ 2075.322600] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2433. [ 2075.341919] Suspending console(s) (use no_console_suspend to debug)
  2434. [ 2075.354188] msm_fb_ext_suspend: Turning off HPD circuitry
  2435. [ 2075.420692] PM: suspend of devices complete after 75.045 msecs
  2436. [ 2075.422279] PM: late suspend of devices complete after 1.556 msecs
  2437. [ 2075.425911] PM: noirq suspend of devices complete after 3.570 msecs
  2438. [ 2075.425942] Disabling non-boot CPUs ...
  2439. [ 2075.426613] msm_pm_enter
  2440. [ 2075.426613] msm_pm_enter: power collapse
  2441. [ 2075.426613] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2442. [ 2075.426613] msm_pm_enter: return
  2443. [ 2075.430031] PM: noirq resume of devices complete after 2.807 msecs
  2444. [ 2075.434243] PM: early resume of devices complete after 1.556 msecs
  2445. [ 2075.440408] msm_fb_ext_resume: Turning on HPD circuitry
  2446. [ 2075.444986] PM: resume of devices complete after 10.710 msecs
  2447. [ 2075.451579] Restarting tasks ...
  2448. [ 2075.468670] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2449. [ 2075.469342] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2450. [ 2075.469555] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2451. [ 2075.471753] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2452. [ 2075.476880] done.
  2453. [ 2075.477429] PM: suspend exit 2013-02-12 10:55:21.036051886 UTC
  2454. [ 2075.588737] FPR: retry count: 0
  2455. [ 2075.621150] FPR: retry count: 1
  2456. [ 2075.653501] FPR: retry count: 2
  2457. [ 2075.660582] retry count(3) reached max, resume in tight loop
  2458. [ 2076.439401] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  2459. [ 2076.439767] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  2460. [ 2076.441202] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  2461. [ 2076.441568] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  2462. [ 2076.441934] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  2463. [ 2079.241415] PM: suspend entry 2013-02-12 10:55:24.799355758 UTC
  2464. [ 2079.245871] Freezing user space processes ... (elapsed 0.07 seconds) done.
  2465. [ 2079.321776] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2466. [ 2079.342712] Suspending console(s) (use no_console_suspend to debug)
  2467. [ 2079.355073] msm_fb_ext_suspend: Turning off HPD circuitry
  2468. [ 2079.368472] PM: suspend of devices complete after 22.035 msecs
  2469. [ 2079.370242] PM: late suspend of devices complete after 1.709 msecs
  2470. [ 2079.373874] PM: noirq suspend of devices complete after 3.601 msecs
  2471. [ 2079.373874] Disabling non-boot CPUs ...
  2472. [ 2079.374576] msm_pm_enter
  2473. [ 2079.374576] msm_pm_enter: power collapse
  2474. [ 2079.374576] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2475. [ 2079.374576] msm_pm_enter: return
  2476. [ 2079.377811] PM: noirq resume of devices complete after 2.655 msecs
  2477. [ 2079.381992] PM: early resume of devices complete after 1.556 msecs
  2478. [ 2079.388035] msm_fb_ext_resume: Turning on HPD circuitry
  2479. [ 2079.392857] PM: resume of devices complete after 10.865 msecs
  2480. [ 2079.399358] Restarting tasks ...
  2481. [ 2079.416358] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2482. [ 2079.416755] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2483. [ 2079.417182] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2484. [ 2079.417365] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2485. [ 2079.423225] done.
  2486. [ 2079.423744] PM: suspend exit 2013-02-12 10:55:26.034793203 UTC
  2487. [ 2080.382267] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  2488. [ 2080.382389] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  2489. [ 2080.383091] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  2490. [ 2080.383213] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  2491. [ 2080.383396] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  2492. [ 2081.242056] PM: suspend entry 2013-02-12 10:55:27.852473190 UTC
  2493. [ 2081.243949] Freezing user space processes ... (elapsed 0.06 seconds) done.
  2494. [ 2081.312589] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2495. [ 2081.333343] Suspending console(s) (use no_console_suspend to debug)
  2496. [ 2081.345642] msm_fb_ext_suspend: Turning off HPD circuitry
  2497. [ 2081.423653] PM: suspend of devices complete after 86.581 msecs
  2498. [ 2081.425240] PM: late suspend of devices complete after 1.556 msecs
  2499. [ 2081.428872] PM: noirq suspend of devices complete after 3.570 msecs
  2500. [ 2081.428872] Disabling non-boot CPUs ...
  2501. [ 2081.429573] msm_pm_enter
  2502. [ 2081.429573] msm_pm_enter: power collapse
  2503. [ 2081.429573] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2504. [ 2081.429573] msm_pm_enter: return
  2505. [ 2081.432931] PM: noirq resume of devices complete after 2.655 msecs
  2506. [ 2081.436929] PM: early resume of devices complete after 1.556 msecs
  2507. [ 2081.443094] msm_fb_ext_resume: Turning on HPD circuitry
  2508. [ 2081.447764] PM: resume of devices complete after 10.801 msecs
  2509. [ 2081.454570] Restarting tasks ...
  2510. [ 2081.471386] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2511. [ 2081.471936] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2512. [ 2081.472180] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2513. [ 2081.472546] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2514. [ 2081.478131] done.
  2515. [ 2081.478650] PM: suspend exit 2013-02-12 10:55:29.034653351 UTC
  2516. [ 2082.441934] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  2517. [ 2082.442178] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  2518. [ 2082.442789] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  2519. [ 2082.443125] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  2520. [ 2082.443338] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  2521. [ 2083.057622] adjust_soc: ibat_ua = -500, vbat_uv = 4343397, soc = 100, batt_temp=302
  2522. [ 2083.232656] PM: suspend entry 2013-02-12 10:55:30.788010962 UTC
  2523. [ 2083.241019] Freezing user space processes ... (elapsed 0.07 seconds) done.
  2524. [ 2083.314573] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2525. [ 2083.333953] Suspending console(s) (use no_console_suspend to debug)
  2526. [ 2083.346222] msm_fb_ext_suspend: Turning off HPD circuitry
  2527. [ 2083.412879] PM: suspend of devices complete after 75.198 msecs
  2528. [ 2083.414466] PM: late suspend of devices complete after 1.556 msecs
  2529. [ 2083.418098] PM: noirq suspend of devices complete after 3.601 msecs
  2530. [ 2083.418128] Disabling non-boot CPUs ...
  2531. [ 2083.418800] msm_pm_enter
  2532. [ 2083.418800] msm_pm_enter: power collapse
  2533. [ 2083.418800] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2534. [ 2083.418800] msm_pm_enter: return
  2535. [ 2083.422218] PM: noirq resume of devices complete after 2.838 msecs
  2536. [ 2083.426186] PM: early resume of devices complete after 1.556 msecs
  2537. [ 2083.432412] msm_fb_ext_resume: Turning on HPD circuitry
  2538. [ 2083.437051] PM: resume of devices complete after 10.832 msecs
  2539. [ 2083.443857] Restarting tasks ...
  2540. [ 2083.460613] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2541. [ 2083.461284] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2542. [ 2083.461498] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2543. [ 2083.464428] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2544. [ 2083.467541] done.
  2545. [ 2083.468212] PM: suspend exit 2013-02-12 10:55:32.034862834 UTC
  2546. [ 2084.432687] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  2547. [ 2084.432900] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  2548. [ 2084.434335] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  2549. [ 2084.434701] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  2550. [ 2084.434915] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  2551. [ 2085.423408] PM: suspend entry 2013-02-12 10:55:33.989433274 UTC
  2552. [ 2085.431710] Freezing user space processes ... (elapsed 0.07 seconds) done.
  2553. [ 2085.505081] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2554. [ 2085.524767] Suspending console(s) (use no_console_suspend to debug)
  2555. [ 2085.536914] msm_fb_ext_suspend: Turning off HPD circuitry
  2556. [ 2085.603509] PM: suspend of devices complete after 75.168 msecs
  2557. [ 2085.605127] PM: late suspend of devices complete after 1.556 msecs
  2558. [ 2085.608728] PM: noirq suspend of devices complete after 3.601 msecs
  2559. [ 2085.608759] Disabling non-boot CPUs ...
  2560. [ 2085.609461] msm_pm_enter
  2561. [ 2085.609461] msm_pm_enter: power collapse
  2562. [ 2085.609461] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2563. [ 2085.609461] msm_pm_enter: return
  2564. [ 2085.612879] PM: noirq resume of devices complete after 2.838 msecs
  2565. [ 2085.616877] PM: early resume of devices complete after 1.525 msecs
  2566. [ 2085.623073] msm_fb_ext_resume: Turning on HPD circuitry
  2567. [ 2085.627742] PM: resume of devices complete after 10.802 msecs
  2568. [ 2085.634518] Restarting tasks ...
  2569. [ 2085.651151] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2570. [ 2085.651823] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2571. [ 2085.652189] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2572. [ 2085.654997] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2573. [ 2085.658232] done.
  2574. [ 2085.658781] PM: suspend exit 2013-02-12 10:55:35.034771760 UTC
  2575. [ 2086.622035] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  2576. [ 2086.622432] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  2577. [ 2086.623897] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  2578. [ 2086.624263] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  2579. [ 2086.624629] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  2580. [ 2088.244071] PM: suspend entry 2013-02-12 10:55:37.619417556 UTC
  2581. [ 2088.252494] Freezing user space processes ... (elapsed 0.07 seconds) done.
  2582. [ 2088.325804] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2583. [ 2088.345246] Suspending console(s) (use no_console_suspend to debug)
  2584. [ 2088.357576] msm_fb_ext_suspend: Turning off HPD circuitry
  2585. [ 2088.375644] PM: suspend of devices complete after 26.704 msecs
  2586. [ 2088.377262] PM: late suspend of devices complete after 1.556 msecs
  2587. [ 2088.380893] PM: noirq suspend of devices complete after 3.601 msecs
  2588. [ 2088.380924] Disabling non-boot CPUs ...
  2589. [ 2088.381595] msm_pm_enter
  2590. [ 2088.381595] msm_pm_enter: power collapse
  2591. [ 2088.381595] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2592. [ 2088.381595] msm_pm_enter: return
  2593. [ 2088.384953] PM: noirq resume of devices complete after 2.655 msecs
  2594. [ 2088.389165] PM: early resume of devices complete after 1.556 msecs
  2595. [ 2088.395360] msm_fb_ext_resume: Turning on HPD circuitry
  2596. [ 2088.399877] PM: resume of devices complete after 10.651 msecs
  2597. [ 2088.406500] Restarting tasks ...
  2598. [ 2088.423134] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2599. [ 2088.423530] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2600. [ 2088.423958] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2601. [ 2088.424171] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2602. [ 2088.429665] done.
  2603. [ 2088.430214] PM: suspend exit 2013-02-12 10:55:51.033908033 UTC
  2604. [ 2088.470288] PM: suspend entry 2013-02-12 10:55:51.073963483 UTC
  2605. [ 2088.470654] Freezing user space processes ... (elapsed 0.02 seconds) done.
  2606. [ 2088.492995] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  2607. [ 2088.514786] Suspending console(s) (use no_console_suspend to debug)
  2608. [ 2088.518998] msm_fb_ext_suspend: Turning off HPD circuitry
  2609. [ 2088.600884] PM: suspend of devices complete after 84.782 msecs
  2610. [ 2088.601403] PM: late suspend of devices complete after 0.518 msecs
  2611. [ 2088.602716] PM: noirq suspend of devices complete after 1.311 msecs
  2612. [ 2088.602716] Disabling non-boot CPUs ...
  2613. [ 2088.603234] msm_pm_enter
  2614. [ 2088.603234] msm_pm_enter: power collapse
  2615. [ 2088.603234] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2616. [ 2088.603234] msm_pm_enter: return
  2617. [ 2088.604364] PM: noirq resume of devices complete after 1.006 msecs
  2618. [ 2088.606225] PM: early resume of devices complete after 0.518 msecs
  2619. [ 2088.608514] msm_fb_ext_resume: Turning on HPD circuitry
  2620. [ 2088.610101] PM: resume of devices complete after 3.873 msecs
  2621. [ 2088.612299] Restarting tasks ...
  2622. [ 2088.618983] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2623. [ 2088.619166] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2624. [ 2088.619258] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2625. [ 2088.619380] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2626. [ 2088.622249] done.
  2627. [ 2088.622432] PM: suspend exit 2013-02-12 10:56:25.013572301 UTC
  2628. [ 2088.864367] FPR: retry count: 0
  2629. [ 2088.896718] FPR: retry count: 1
  2630. [ 2088.929100] FPR: retry count: 2
  2631. [ 2088.936181] retry count(3) reached max, resume in tight loop
  2632. [ 2089.604730] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  2633. [ 2089.604852] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  2634. [ 2089.605493] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  2635. [ 2089.605676] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  2636. [ 2089.605859] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  2637. [ 2092.234884] PM: suspend entry 2013-02-12 10:56:28.625294856 UTC
  2638. [ 2092.238699] Freezing user space processes ... (elapsed 0.07 seconds) done.
  2639. [ 2092.315244] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  2640. [ 2092.336181] Suspending console(s) (use no_console_suspend to debug)
  2641. [ 2092.348511] msm_fb_ext_suspend: Turning off HPD circuitry
  2642. [ 2092.361574] PM: suspend of devices complete after 21.669 msecs
  2643. [ 2092.363283] PM: late suspend of devices complete after 1.709 msecs
  2644. [ 2092.366915] PM: noirq suspend of devices complete after 3.601 msecs
  2645. [ 2092.366946] Disabling non-boot CPUs ...
  2646. [ 2092.367617] msm_pm_enter
  2647. [ 2092.367617] msm_pm_enter: power collapse
  2648. [ 2092.367617] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2649. [ 2092.367617] msm_pm_enter: return
  2650. [ 2092.370852] PM: noirq resume of devices complete after 2.655 msecs
  2651. [ 2092.375003] PM: early resume of devices complete after 1.556 msecs
  2652. [ 2092.381046] msm_fb_ext_resume: Turning on HPD circuitry
  2653. [ 2092.385868] PM: resume of devices complete after 10.834 msecs
  2654. [ 2092.392369] Restarting tasks ...
  2655. [ 2092.409461] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2656. [ 2092.409857] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2657. [ 2092.410254] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2658. [ 2092.410620] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2659. [ 2092.416267] done.
  2660. [ 2092.416785] PM: suspend exit 2013-02-12 10:56:30.034821673 UTC
  2661. [ 2093.375400] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
  2662. [ 2093.375522] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
  2663. [ 2093.375827] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
  2664. [ 2093.375919] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
  2665. [ 2093.376102] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
  2666. [ 2094.335479] PM: suspend entry 2013-02-12 10:56:31.952848758 UTC
  2667. [ 2094.337402] Freezing user space processes ... (elapsed 0.06 seconds) done.
  2668. [ 2094.405890] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  2669. [ 2094.426796] Suspending console(s) (use no_console_suspend to debug)
  2670. [ 2094.439157] msm_fb_ext_suspend: Turning off HPD circuitry
  2671. [ 2094.528643] PM: suspend of devices complete after 98.088 msecs
  2672. [ 2094.530230] PM: late suspend of devices complete after 1.556 msecs
  2673. [ 2094.534014] PM: noirq suspend of devices complete after 3.753 msecs
  2674. [ 2094.534045] Disabling non-boot CPUs ...
  2675. [ 2094.534716] msm_pm_enter
  2676. [ 2094.534716] msm_pm_enter: power collapse
  2677. [ 2094.534716] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  2678. [ 2094.534716] msm_pm_enter: return
  2679. [ 2094.537951] PM: noirq resume of devices complete after 2.655 msecs
  2680. [ 2094.542407] PM: early resume of devices complete after 1.556 msecs
  2681. [ 2094.548572] msm_fb_ext_resume: Turning on HPD circuitry
  2682. [ 2094.553089] PM: resume of devices complete after 10.651 msecs
  2683. [ 2094.559834] Restarting tasks ...
  2684. [ 2094.576010] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2685. [ 2094.576560] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2686. [ 2094.576804] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
  2687. [ 2094.577170] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
  2688. [ 2094.581931] done.
  2689. [ 2094.582450] PM: suspend exit 2013-02-12 10:56:33.032951013 UTC
  2690. [ 2094.629482] [Touch D]touch enable
  2691. [ 2094.638821] auto_hotplug: CPU1 online.
  2692. [ 2094.640469] mipi_dsi_panel_power: mipi lcd function started status = 1
  2693. [ 2094.645566] mipi_dsi_panel_power : reset start.
  2694. [ 2094.666778] mipi_lgit_lcd_on started
  2695. [ 2094.723942] mipi_lgit_lcd_on finished
  2696. [ 2094.727025] lm3530_backlight_on, ++ lm3530_backlight_on
  2697. [ 2095.123179] ------------[ cut here ]------------
  2698. [ 2095.123240] Kernel BUG at c0124c30 [verbose debug info unavailable]
  2699. [ 2095.123332] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
  2700. [ 2095.123393] Modules linked in:
  2701. [ 2095.123546] CPU: 1 Not tainted (3.4.0-franco.Kernel-nightly #72)
  2702. [ 2095.123607] PC is at fd_install+0x60/0x64
  2703. [ 2095.123729] LR is at fd_install+0x34/0x64
  2704. [ 2095.123790] pc : <c0124c30> lr : <c0124c04> psr: a0000013
  2705. [ 2095.123790] sp : eed5dcb0 ip : 0e7c0e7d fp : eed5dccc
  2706. [ 2095.123942] r10: eed5c000 r9 : eed5dd04 r8 : cf928680
  2707. [ 2095.124004] r7 : ed12c480 r6 : eeb29340 r5 : ffffffe8 r4 : eeb29300
  2708. [ 2095.124095] r3 : eb5c3900 r2 : eb76e900 r1 : 00000e7c r0 : eeb29340
  2709. [ 2095.124187] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
  2710. [ 2095.124248] Control: 10c5787d Table: af5d806a DAC: 00000015
  2711. [ 2095.124339]
  2712. [ 2095.124370] PC: 0xc0124bb0:
  2713. [ 2095.124461] 4bb0 e5903020 e5933010 e5933000 e3530000 1afffff3 e3e00013 eafffff4 00984bf0
  2714. [ 2095.125011] 4bd0 e1a0c00d e92dd8f0 e24cb004 e1a0200d e1a05000 e3c23d7f e1a07001 e3c3303f
  2715. [ 2095.125530] 4bf0 e593300c e5934258 e2846040 e1a00006 eb1de17a e5943004 e5932004 e7922105
  2716. [ 2095.126079] 4c10 e3520000 1a000005 f57ff05f e5933004 e1a00006 e7837105 eb1de321 e89da8f0
  2717. [ 2095.126598] 4c30 e7f001f2 e1a0c00d e92dd830 e24cb004 e24dd038 e5903004 e3710001 e1a04000
  2718. [ 2095.127147] 4c50 150b1044 e5935020 13a03042 03a03040 e3720001 e50b304c 151b304c 150b2040
  2719. [ 2095.127666] 4c70 13833004 150b304c e1d530b0 e2855060 e1a00005 e2033a0f e3530901 151b304c
  2720. [ 2095.128215] 4c90 13833b16 150b304c eb1dda1a e24b104c e5940004 eb006e03 e1a04000 e1a00005
  2721. [ 2095.128765]
  2722. [ 2095.128765] LR: 0xc0124b84:
  2723. [ 2095.128887] 4b84 13e00015 1a000004 e3520000 0a000004 e58d4000 e24b302c eb00426d e24bd018
  2724. [ 2095.129375] 4ba4 e89da870 e3130901 0afffff8 e5903020 e5933010 e5933000 e3530000 1afffff3
  2725. [ 2095.129955] 4bc4 e3e00013 eafffff4 00984bf0 e1a0c00d e92dd8f0 e24cb004 e1a0200d e1a05000
  2726. [ 2095.130474] 4be4 e3c23d7f e1a07001 e3c3303f e593300c e5934258 e2846040 e1a00006 eb1de17a
  2727. [ 2095.131023] 4c04 e5943004 e5932004 e7922105 e3520000 1a000005 f57ff05f e5933004 e1a00006
  2728. [ 2095.131603] 4c24 e7837105 eb1de321 e89da8f0 e7f001f2 e1a0c00d e92dd830 e24cb004 e24dd038
  2729. [ 2095.132152] 4c44 e5903004 e3710001 e1a04000 150b1044 e5935020 13a03042 03a03040 e3720001
  2730. [ 2095.132671] 4c64 e50b304c 151b304c 150b2040 13833004 150b304c e1d530b0 e2855060 e1a00005
  2731. [ 2095.133221]
  2732. [ 2095.133221] SP: 0xeed5dc30:
  2733. [ 2095.133343] dc30 eed5dc74 00000001 c0de9bb8 ec4e8f80 eed5dc6c eed5dc50 c0124c34 a0000013
  2734. [ 2095.133892] dc50 c0010a54 00000000 eed5dccc eed5dc68 c00107e8 c000a174 eeb29340 00000e7c
  2735. [ 2095.134441] dc70 eb76e900 eb5c3900 eeb29300 ffffffe8 eeb29340 ed12c480 cf928680 eed5dd04
  2736. [ 2095.134991] dc90 eed5c000 eed5dccc 0e7c0e7d eed5dcb0 c0124c04 c0124c30 a0000013 ffffffff
  2737. [ 2095.135510] dcb0 4045cb88 00000001 ec4e8f80 cf928260 eed5dcdc eed5dcd0 c033bb2c c0124bdc
  2738. [ 2095.136059] dcd0 eed5ddcc eed5dce0 c02699b4 c033bb1c c0023a88 c00238d4 c0d3770c c0d384f8
  2739. [ 2095.136639] dcf0 eed5dd0c 00000001 00000001 4045cb98 4045cb84 0000039a c00137c4 c0023894
  2740. [ 2095.137127] dd10 00000001 00000001 c0d384f8 c0d009e8 c0d009e8 00000003 eed5dd6c eed5dd38
  2741. [ 2095.137677]
  2742. [ 2095.137677] FP: 0xeed5dc4c:
  2743. [ 2095.137829] dc4c a0000013 c0010a54 00000000 eed5dccc eed5dc68 c00107e8 c000a174 eeb29340
  2744. [ 2095.138348] dc6c 00000e7c eb76e900 eb5c3900 eeb29300 ffffffe8 eeb29340 ed12c480 cf928680
  2745. [ 2095.138897] dc8c eed5dd04 eed5c000 eed5dccc 0e7c0e7d eed5dcb0 c0124c04 c0124c30 a0000013
  2746. [ 2095.139447] dcac ffffffff 4045cb88 00000001 ec4e8f80 cf928260 eed5dcdc eed5dcd0 c033bb2c
  2747. [ 2095.139966] dccc c0124bdc eed5ddcc eed5dce0 c02699b4 c033bb1c c0023a88 c00238d4 c0d3770c
  2748. [ 2095.140515] dcec c0d384f8 eed5dd0c 00000001 00000001 4045cb98 4045cb84 0000039a c00137c4
  2749. [ 2095.141064] dd0c c0023894 00000001 00000001 c0d384f8 c0d009e8 c0d009e8 00000003 eed5dd6c
  2750. [ 2095.141553] dd2c eed5dd38 c00b1884 c089d91c ffffffff 00000000 eed5dd74 eed5dd50 c009f6a4
  2751. [ 2095.142072]
  2752. [ 2095.142072] R0: 0xeeb292c0:
  2753. [ 2095.142163] 92c0 00000000 00000000 00000000 00000000 e2268b01 ec4511ab 3e7d067a 06f22b44
  2754. [ 2095.142682] 92e0 8be4feb1 bea7fd87 bb7f2e44 7dea9ff9 f5c78c59 b8aada7a 7bcf76a9 8245b589
  2755. [ 2095.143262] 9300 0000000b eb5c3900 00000020 eeb29350 eeb29348 eeb2934c 667f5fc9 c7fd6c59
  2756. [ 2095.143811] 9320 00000000 941f52f1 f7ef885a ff44147c 2e4b75b4 534fa54f b058a33c 05097bc0
  2757. [ 2095.144330] 9340 0e7c0e7d 0000039b 24003008 ffffffff ef1f73c0 ef1f73c0 ef1f73c0 eed989c0
  2758. [ 2095.144818] 9360 eed98180 eed98780 eed98b40 eed980c0 ef1b7c00 eed98a80 eed98cc0 eec116c0
  2759. [ 2095.145398] 9380 eed55180 eed550c0 ef1cb9c0 eea58b40 eea58a80 eea58600 eea583c0 ef1dc180
  2760. [ 2095.145948] 93a0 eeac1300 ef1ca0c0 eec0dc00 eeb8c480 eeb8c000 eea54180 eea543c0 ef1dc180
  2761. [ 2095.146497]
  2762. [ 2095.146497] R2: 0xeb76e880:
  2763. [ 2095.146589] e880 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2764. [ 2095.147077] e8a0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2765. [ 2095.147596] e8c0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 eb76eb40
  2766. [ 2095.148145] e8e0 c00ce124 00000100 eb76e8e8 eb76e8e8 c00d22bc 00000000 00000000 00000000
  2767. [ 2095.148694] e900 eb76e900 eb76e900 cf7786d0 e987db00 c0de9bb8 00000000 00000000 00000001
  2768. [ 2095.149244] e920 00000000 00000001 00000000 00000000 00000000 00000000 00000000 00000000
  2769. [ 2095.149732] e940 00000000 00000000 ef1d3800 00000000 00000000 00000000 00000000 00000000
  2770. [ 2095.150282] e960 00000000 00000000 00000000 00000000 00000000 00000000 e6c9d580 eb76e97c
  2771. [ 2095.150831]
  2772. [ 2095.150831] R3: 0xeb5c3880:
  2773. [ 2095.150953] 3880 e8f6fb80 f2520000 00009000 00000001 00000000 00000000 00000000 c0309d00
  2774. [ 2095.151502] 38a0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2775. [ 2095.152052] 38c0 000552c7 e6fb1144 00000000 00000000 ee7abcd1 00000000 ed17a110 00000000
  2776. [ 2095.152571] 38e0 ed417fa0 ea630200 ed417f80 0000008a 00000001 00000001 eb5c3300 00000000
  2777. [ 2095.153150] 3900 00000400 ecccb000 eeef1d80 eeef1d00 00000000 00000000 00000000 00000000
  2778. [ 2095.153700] 3920 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2779. [ 2095.154219] 3940 00000001 00000000 eb5c3a00 c0ad5418 eb5c3610 00000000 00000000 00000000
  2780. [ 2095.154768] 3960 00000000 4883d2bb c0da87a8 00000000 00000000 81240002 00004b5c 00000000
  2781. [ 2095.155348]
  2782. [ 2095.155348] R4: 0xeeb29280:
  2783. [ 2095.155470] 9280 eea22f00 eed00000 eed00600 eed55a80 eea5bd80 eed06e40 eed06000 ecf3e480
  2784. [ 2095.156019] 92a0 ecf3e540 ecf3ed80 ec2143c0 ed1c29c0 00000000 00000000 00000000 00000000
  2785. [ 2095.156630] 92c0 00000000 00000000 00000000 00000000 e2268b01 ec4511ab 3e7d067a 06f22b44
  2786. [ 2095.157149] 92e0 8be4feb1 bea7fd87 bb7f2e44 7dea9ff9 f5c78c59 b8aada7a 7bcf76a9 8245b589
  2787. [ 2095.157698] 9300 0000000b eb5c3900 00000020 eeb29350 eeb29348 eeb2934c 667f5fc9 c7fd6c59
  2788. [ 2095.158247] 9320 00000000 941f52f1 f7ef885a ff44147c 2e4b75b4 534fa54f b058a33c 05097bc0
  2789. [ 2095.158797] 9340 0e7c0e7e 0000039b 24003008 ffffffff ef1f73c0 ef1f73c0 ef1f73c0 eed989c0
  2790. [ 2095.159316] 9360 eed98180 eed98780 eed98b40 eed980c0 ef1b7c00 eed98a80 eed98cc0 eec116c0
  2791. [ 2095.159865]
  2792. [ 2095.159865] R6: 0xeeb292c0:
  2793. [ 2095.159957] 92c0 00000000 00000000 00000000 00000000 e2268b01 ec4511ab 3e7d067a 06f22b44
  2794. [ 2095.160506] 92e0 8be4feb1 bea7fd87 bb7f2e44 7dea9ff9 f5c78c59 b8aada7a 7bcf76a9 8245b589
  2795. [ 2095.161055] 9300 0000000b eb5c3900 00000020 eeb29350 eeb29348 eeb2934c 667f5fc9 c7fd6c59
  2796. [ 2095.161605] 9320 00000000 941f52f1 f7ef885a ff44147c 2e4b75b4 534fa54f b058a33c 05097bc0
  2797. [ 2095.162093] 9340 0e7c0e7e 0000039b 24003008 ffffffff ef1f73c0 ef1f73c0 ef1f73c0 eed989c0
  2798. [ 2095.162673] 9360 eed98180 eed98780 eed98b40 eed980c0 ef1b7c00 eed98a80 eed98cc0 eec116c0
  2799. [ 2095.163192] 9380 eed55180 eed550c0 ef1cb9c0 eea58b40 eea58a80 eea58600 eea583c0 ef1dc180
  2800. [ 2095.163772] 93a0 eeac1300 ef1ca0c0 eec0dc00 eeb8c480 eeb8c000 eea54180 eea543c0 ef1dc180
  2801. [ 2095.164290]
  2802. [ 2095.164290] R7: 0xed12c400:
  2803. [ 2095.164412] c400 ed3f4ac0 ed12c640 ed12c408 ed12c408 ed12c410 ed12c410 ed12c418 ed12c418
  2804. [ 2095.164931] c420 eeaf9720 ed12c2a0 ef1cb240 ea0afd00 00000000 00000000 000000cf 00000000
  2805. [ 2095.165481] c440 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2806. [ 2095.166061] c460 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2807. [ 2095.166610] c480 ed12c480 ed12c480 cf7786d0 e9496e00 c0de9bb8 00000000 00000000 00000001
  2808. [ 2095.167098] c4a0 00000000 00000001 00000000 00000000 00000000 00000000 00000000 00000000
  2809. [ 2095.167617] c4c0 00000000 00000000 ef1d3800 00000000 00000000 00000000 00000000 00000000
  2810. [ 2095.168166] c4e0 00000000 00000000 00000000 00000000 00000000 00000000 ec4e8f80 ed12c4fc
  2811. [ 2095.168685]
  2812. [ 2095.168685] R8: 0xcf928600:
  2813. [ 2095.168838] 8600 0000000a 00000000 00000000 00000001 00000000 ec4e8a00 ea1df280 eaf57a00
  2814. [ 2095.169387] 8620 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffffffe8
  2815. [ 2095.169876] 8640 ec0b4f80 ec4e8f80 ea949200 cf8d4b80 0000965e 00000000 00000000 00000000
  2816. [ 2095.170394] 8660 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2817. [ 2095.170944] 8680 00000000 00100010 cf928688 cf928688 eebe61c0 7fffffff 96769676 cf92869c
  2818. [ 2095.171463] 86a0 cf92869c 00000000 00000100 cf9286ac cf9286ac c0268da4 e2f0e000 00000001
  2819. [ 2095.171982] 86c0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2820. [ 2095.172531] 86e0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2821. [ 2095.173080]
  2822. [ 2095.173080] R9: 0xeed5dc84:
  2823. [ 2095.173172] dc84 ed12c480 cf928680 eed5dd04 eed5c000 eed5dccc 0e7c0e7d eed5dcb0 c0124c04
  2824. [ 2095.173721] dca4 c0124c30 a0000013 ffffffff 4045cb88 00000001 ec4e8f80 cf928260 eed5dcdc
  2825. [ 2095.174240] dcc4 eed5dcd0 c033bb2c c0124bdc eed5ddcc eed5dce0 c02699b4 c033bb1c c0023a88
  2826. [ 2095.174789] dce4 c00238d4 c0d3770c c0d384f8 eed5dd0c 00000001 00000001 4045cb98 4045cb84
  2827. [ 2095.175339] dd04 0000039a c00137c4 c0023894 00000001 00000001 c0d384f8 c0d009e8 c0d009e8
  2828. [ 2095.175919] dd24 00000003 eed5dd6c eed5dd38 c00b1884 c089d91c ffffffff 00000000 eed5dd74
  2829. [ 2095.176407] dd44 eed5dd50 c009f6a4 c000b380 ffffffff c0e24360 ffffffff eed5e000 ffffffff
  2830. [ 2095.176956] dd64 00000000 eed5dd9c eed5dd78 c009fa24 c00dd9f4 00000000 c02403a4 eed5e01c
  2831. [ 2095.177536]
  2832. [ 2095.177536] R10: 0xeed5bf80:
  2833. [ 2095.177628] bf80 73060606 73060606 73060606 73060606 73060606 73060606 73060606 73060606
  2834. [ 2095.178177] bfa0 73060606 73060606 73060606 73060606 73060606 73060606 73060606 73060606
  2835. [ 2095.178727] bfc0 73060606 73060606 73060606 73060606 73060606 73060606 73060606 73060606
  2836. [ 2095.179245] bfe0 73060606 73060606 73060606 73060606 73060606 73060606 73060606 73060606
  2837. [ 2095.179795] c000 00000000 00000003 00000000 eebe61c0 c0da11c0 00000001 00000015 c3c144c0
  2838. [ 2095.180344] c020 eed5c000 c000a148 c0d384f8 eebe61c0 eeac6540 eae8c000 eed5dc1c eed5db70
  2839. [ 2095.180893] c040 c089c010 00000000 00000000 00000000 00000000 00000000 01010000 00000000
  2840. [ 2095.181412] c060 4045cf00 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  2841. [ 2095.181901] Process SurfaceFlinger (pid: 302, stack limit = 0xeed5c2f0)
  2842. [ 2095.182023] Stack: (0xeed5dcb0 to 0xeed5e000)
  2843. [ 2095.182053] dca0: 4045cb88 00000001 ec4e8f80 cf928260
  2844. [ 2095.182175] dcc0: eed5dcdc eed5dcd0 c033bb2c c0124bdc eed5ddcc eed5dce0 c02699b4 c033bb1c
  2845. [ 2095.182236] dce0: c0023a88 c00238d4 c0d3770c c0d384f8 eed5dd0c 00000001 00000001 4045cb98
  2846. [ 2095.182328] dd00: 4045cb84 0000039a c00137c4 c0023894 00000001 00000001 c0d384f8 c0d009e8
  2847. [ 2095.182419] dd20: c0d009e8 00000003 eed5dd6c eed5dd38 c00b1884 c089d91c ffffffff 00000000
  2848. [ 2095.182542] dd40: eed5dd74 eed5dd50 c009f6a4 c000b380 ffffffff c0e24360 ffffffff eed5e000
  2849. [ 2095.182603] dd60: ffffffff 00000000 eed5dd9c eed5dd78 c009fa24 c00dd9f4 00000000 c02403a4
  2850. [ 2095.182694] dd80: eed5e01c eebe61c0 eed5ddb4 eed5dd98 c00a2b8c c00237a0 c3c144c0 eed5c000
  2851. [ 2095.182816] dda0: c000a148 cf928000 4045cb88 c000a148 c0d37708 4045cb88 eea7e020 00000000
  2852. [ 2095.182908] ddc0: eed5def4 eed5ddd0 c025d9e8 c026941c 00000000 00000000 eebe61c0 c0d024c0
  2853. [ 2095.182969] dde0: c0d024c0 c0d024c0 c0d024c0 c0d024c0 c0d024c0 00000001 00000002 00000001
  2854. [ 2095.183060] de00: eed5de1c eed5de10 c089d96c c089c4f0 eed5de5c eed5de20 c00a7728 c089d91c
  2855. [ 2095.183183] de20: ec0b4000 00000001 c0d024c0 60000013 ec0b4b40 eebe6940 eebe6948 eed5c000
  2856. [ 2095.183244] de40: 00000001 c0e8ae78 ffffffff c0e8ae7c 2a09778c 00000001 eed5de7c eed5de68
  2857. [ 2095.183335] de60: c089c524 c089bd3c 00000002 c0e8ae70 eed5de8c eed5de80 00000002 c0e8ae70
  2858. [ 2095.183427] de80: eed5dec4 eed5de90 c00c41ec c00c3cc8 00000001 2a097000 eeac6540 0000078c
  2859. [ 2095.183549] dea0: c000a148 00000001 00000001 00000000 2a09778c 00000001 eed5df4c eed5dec8
  2860. [ 2095.183610] dec0: c00c5624 c00c40f0 eed5defc 271ae91c c013b614 ffffed20 eeac1300 4045cb88
  2861. [ 2095.183701] dee0: eeac1300 4045cb88 eed5df0c eed5def8 c025dfbc c025d96c c025df68 00005452
  2862. [ 2095.183793] df00: eed5df7c eed5df10 c0137644 c025df74 eed5df34 eed5df20 41e63ba6 00000000
  2863. [ 2095.183854] df20: c0e8a2d8 00000107 eed5df74 eed5df38 c00ba934 c0082948 0417758d 00000000
  2864. [ 2095.183915] df40: ffffffff 00000000 00000001 00000001 eed5df7c 40106da2 00000014 4045cb88
  2865. [ 2095.184007] df60: eeac1300 c0010ce8 eed5c000 00000000 eed5dfa4 eed5df80 c0137b38 c01375c8
  2866. [ 2095.184129] df80: 00000000 00000001 2a0ec3c8 2a0ec3c8 2a0ec5a8 00000036 00000000 eed5dfa8
  2867. [ 2095.184190] dfa0: c0010b40 c0137b08 2a0ec3c8 2a0ec3c8 00000014 40106da2 4045cb88 4045cb7c
  2868. [ 2095.184281] dfc0: 2a0ec3c8 2a0ec3c8 2a0ec5a8 00000036 4045cba8 40ceff66 2a00755c 00000000
  2869. [ 2095.184373] dfe0: 40cf1f34 4045cb60 400806c5 4006cfdc 000f0010 00000014 00000000 00000000
  2870. [ 2095.184495] Backtrace:
  2871. [ 2095.184617] [<c0124bd0>] (fd_install+0x0/0x64) from [<c033bb2c>] (sync_fence_install+0x1c/0x20)
  2872. [ 2095.184709] r7:cf928260 r6:ec4e8f80 r5:00000001 r4:4045cb88
  2873. [ 2095.184983] [<c033bb10>] (sync_fence_install+0x0/0x20) from [<c02699b4>] (msm_fb_ioctl+0x5a4/0x16e8)
  2874. [ 2095.185075] [<c0269410>] (msm_fb_ioctl+0x0/0x16e8) from [<c025d9e8>] (do_fb_ioctl+0x88/0x608)
  2875. [ 2095.185197] [<c025d960>] (do_fb_ioctl+0x0/0x608) from [<c025dfbc>] (fb_ioctl+0x54/0x60)
  2876. [ 2095.185258] r8:4045cb88 r7:eeac1300 r6:4045cb88 r5:eeac1300 r4:ffffed20
  2877. [ 2095.185624] [<c025df68>] (fb_ioctl+0x0/0x60) from [<c0137644>] (do_vfs_ioctl+0x88/0x540)
  2878. [ 2095.185716] r4:00005452 r3:c025df68
  2879. [ 2095.185868] [<c01375bc>] (do_vfs_ioctl+0x0/0x540) from [<c0137b38>] (sys_ioctl+0x3c/0x68)
  2880. [ 2095.185990] [<c0137afc>] (sys_ioctl+0x0/0x68) from [<c0010b40>] (ret_fast_syscall+0x0/0x30)
  2881. [ 2095.186051] r7:00000036 r6:2a0ec5a8 r5:2a0ec3c8 r4:2a0ec3c8
  2882. [ 2095.186357] Code: e1a00006 e7837105 eb1de321 e89da8f0 (e7f001f2)
  2883. [ 2095.186479] ---[ end trace a890dd2aef0f2239 ]---
  2884. [ 2095.186601] Kernel panic - not syncing: Fatal exception
  2885. [ 2095.186631] CPU0: stopping
  2886. [ 2095.186753] Backtrace:
  2887. [ 2095.186875] [<c0014fec>] (dump_backtrace+0x0/0x138) from [<c088f918>] (dump_stack+0x18/0x1c)
  2888. [ 2095.186967] r6:c0d384f8 r5:c0e245e4 r4:00000000 r3:271ae91c
  2889. [ 2095.187242] [<c088f900>] (dump_stack+0x0/0x1c) from [<c001713c>] (handle_IPI+0x1e4/0x21c)
  2890. [ 2095.187333] [<c0016f58>] (handle_IPI+0x0/0x21c) from [<c000a630>] (gic_handle_irq+0xcc/0x11c)
  2891. [ 2095.187425] [<c000a564>] (gic_handle_irq+0x0/0x11c) from [<c0010740>] (__irq_svc+0x40/0x70)
  2892. [ 2095.187486] Exception stack(0xeeb7bef0 to 0xeeb7bf38)
  2893. [ 2095.187608] bee0: eeb29340 00000e7d 00000001 00020000
  2894. [ 2095.187669] bf00: 0e7c0e7e eeb29300 befffa8c 00000000 eeb29340 eeb7a000 00000000 eeb7bf4c
  2895. [ 2095.187761] bf20: 20000013 eeb7bf3c c01416e0 c089d270 20000013 ffffffff
  2896. [ 2095.187852] [<c089d1f0>] (_raw_spin_lock+0x0/0xac) from [<c01416e0>] (alloc_fd+0x34/0x138)
  2897. [ 2095.187913] r4:00000001
  2898. [ 2095.188066] [<c01416ac>] (alloc_fd+0x0/0x138) from [<c01417fc>] (get_unused_fd+0x18/0x1c)
  2899. [ 2095.188157] [<c01417e4>] (get_unused_fd+0x0/0x1c) from [<c01362d0>] (sys_dup+0x1c/0x4c)
  2900. [ 2095.188249] [<c01362b4>] (sys_dup+0x0/0x4c) from [<c0010b40>] (ret_fast_syscall+0x0/0x30)
  2901. [ 2095.188340] r5:befffa8c r4:00000001
  2902. [ 2095.188585] wcnss_8960: crash shutdown : 0
  2903. [ 2098.694521] Rebooting in 5 seconds..
  2904. [ 2103.702395] Going down for restart now
  2905.  
  2906. No errors detected
  2907. Boot info:
  2908. Last boot reason: kernel_panic
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!