Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- CFE>
- web info: Waiting for connection on socket 0.\0x1b[J
- CFE>
- web info: Waiting for connection on socket 1.\0x1b[J
- CFE>
- web info: Waiting for connection on socket 0.\0x1b[J
- CFE>
- web info: Upload 4194560 bytes, Broadcom image format.\0x1b[J
- CFE>
- Flashing root file system and kernel at 0xb8010000: .................................................................
- .
- *** Image flash done *** !
- Resetting board...\0xff
- CFE version 1.0.37-105.22-1 for BCM96368 (32bit,SP,BE)
- Build Date: Fri Mar 19 11:53:33 CST 2010 (jojopo@broadcom_v060.comtrend.com)
- Copyright (C) 2000-2009 Broadcom Corporation.
- Parallel flash device: name AM29DL800B, id 0x22cb size 8192KB
- Total Flash size: 8192K with 135 sectors
- Chip ID: BCM6368B2, MIPS: 400MHz
- Main Thread: TP0
- Total Memory: 67108864 bytes (64MB)
- Boot Address: 0xb8000000
- Board IP address : 192.168.1.1:ffffff00
- Host IP address : 192.168.1.100
- Gateway IP address :
- Run from flash/host (f/h) : f
- Default host run file name : vmlinux
- Default host flash file name : bcm963xx_fs_kernel
- Boot delay (0-9 seconds) : 1
- Board Id (0-14) : 96368M-1341N
- Number of MAC Addresses (1-32) : 11
- Base MAC Address : 64:68:0c
- PSI Size (1-64) KBytes : 24
- Enable Backup PSI [0|1] : 0
- System Log Size (0-256) KBytes : 0
- Main Thread Number [0|1] : 0
- *** Press any key to stop auto run (1 seconds) ***
- Auto run second count down: 1\0x081\0x080
- Booting from only image (0xb8010000) ...
- Code Address: 0x80010000, Entry Address: 0x80010000
- LZMA: Prossible old LZMA format, trying to decompress..
- Decompression OK!
- Entry at 0x80010000
- Closing network.
- Disabling Switch ports.
- Flushing Receive Buffers...
- 17 buffers found.
- Closing DMA Channels.
- Starting program at 0x80010000
- [ 0.000000] Linux version 3.7.10 (pepe@debian) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #2 Sun Aug 4 15:50:21 CEST 2013
- [ 0.000000] Detected Broadcom 0x6368 CPU revision b2
- [ 0.000000] CPU frequency is 400 MHz
- [ 0.000000] 64MB of RAM installed
- [ 0.000000] registering 38 GPIOs
- [ 0.000000] board_bcm963xx: Boot address 0xb8000000
- [ 0.000000] board_bcm963xx: CFE version: 1.0.37-105.22
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
- [ 0.000000] board_bcm963xx: board name: 96368M-1341N
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 04000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
- [ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
- [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
- [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Memory: 61400k/65536k available (2335k kernel code, 4136k reserved, 603k data, 260k init, 0k highmem)
- [ 0.000000] NR_IRQS:128
- [ 0.000000] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
- [ 0.032000] pid_max: default: 32768 minimum: 301
- [ 0.036000] Mount-cache hash table entries: 512
- [ 0.040000] NET: Registered protocol family 16
- [ 0.048000] registering PCI controller with io_map_base unset
- [ 0.056000] bio: create slab <bio-0> at 0
- [ 0.060000] PCI host bridge to bus 0000:00
- [ 0.064000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
- [ 0.068000] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
- [ 0.072000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 0.088000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
- [ 0.092000] Switching to clocksource MIPS
- [ 0.100000] NET: Registered protocol family 2
- [ 0.104000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.112000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.120000] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.124000] TCP: reno registered
- [ 0.128000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.136000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.140000] NET: Registered protocol family 1
- [ 0.148000] audit: initializing netlink socket (disabled)
- [ 0.152000] type=2000 audit(0.152:1): initialized
- [ 0.160000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.164000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.176000] msgmni has been set to 119
- [ 0.180000] io scheduler noop registered
- [ 0.184000] io scheduler deadline registered (default)
- [ 0.192000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 10) is a bcm63xx_uart
- \0xea[ 0.200000] console [ttyS0] enabled, bootconsole disabled
- [ 0.200000] console [ttyS0] enabled, bootconsole disabled
- [ 0.212000] bcm63xx-rng bcm63xx-rng: registered RNG driver
- [ 0.220000] physmap platform flash device: 08000000 at 18000000
- [ 0.224000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
- [ 0.236000] Amd/Fujitsu Extended Query Table at 0x0040
- [ 0.240000] Amd/Fujitsu Extended Query version 1.1.
- [ 0.248000] number of CFI chips: 1
- [ 0.252000] bcm63xxpart: CFE boot tag found with version 6 and board type 96368M-1341N
- [ 0.260000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
- [ 0.264000] bcm63xxpart: Partition 1 is kernel offset 10100 and length 10ff00
- [ 0.272000] bcm63xxpart: Partition 2 is rootfs offset 120000 and length 6d0000
- [ 0.280000] bcm63xxpart: Partition 3 is nvram offset 7f0000 and length 10000
- [ 0.288000] bcm63xxpart: Partition 4 is linux offset 10000 and length 7e0000
- [ 0.296000] bcm63xxpart: Spare partition is offset 2f0004 and length 4ffffc
- [ 0.300000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
- [ 0.308000] Creating 5 MTD partitions on "physmap-flash.0":
- [ 0.316000] 0x000000000000-0x000000010000 : "CFE"
- [ 0.320000] 0x000000010100-0x000000120000 : "kernel"
- [ 0.328000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- [ 0.340000] 0x000000120000-0x0000007f0000 : "rootfs"
- [ 0.348000] mtd: partition "rootfs" set to be root filesystem
- [ 0.352000] mtd: partition "rootfs_data" created automatically, ofs=2F0000, len=500000
- [ 0.364000] 0x0000002f0000-0x0000007f0000 : "rootfs_data"
- [ 0.368000] 0x0000007f0000-0x000000800000 : "nvram"
- [ 0.376000] 0x000000010000-0x0000007f0000 : "linux"
- [ 0.384000] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542) v0.1.2
- [ 0.432000] b53_common: found switch: BCM63xx, rev 0
- [ 0.436000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
- [ 0.448000] TCP: cubic registered
- [ 0.448000] NET: Registered protocol family 17
- [ 0.456000] 8021q: 802.1Q VLAN Support v1.8
- [ 0.468000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
- [ 0.476000] Freeing unused kernel memory: 260k freed
- - preinit -
- Press the [f] key and hit [enter] to enter failsafe mode
- - regular preinit -
- jffs2 not ready yet; using ramdisk
- - init -
- Please press Enter to activate this console.
- [ 7.584000] Compat-drivers backport release: compat-drivers-2013-01-21-1
- [ 7.588000] Backport based on wireless-testing.git master-2013-02-22
- [ 7.596000] compat.git: wireless-testing.git
- [ 7.644000] cfg80211: Calling CRDA to update world regulatory domain
- [ 7.648000] cfg80211: World regulatory domain updated:
- [ 7.656000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 7.664000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 7.672000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 7.680000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 7.688000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 7.696000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 8.556000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
- [ 10.144000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xc0240000, irq=21
- [ 10.156000] cfg80211: Calling CRDA for country: AW
- [ 10.160000] cfg80211: Regulatory domain changed to country: AW
- [ 10.164000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 10.172000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 10.180000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 10.188000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 10.196000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
- [ 10.216000] Button Hotplug driver version 0.4.1
- [ 10.252000] PPP generic driver version 2.4.2
- [ 10.520000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 10.660000] NET: Registered protocol family 24
- [ 10.684000] nf_conntrack version 0.5.0 (963 buckets, 3852 max)
- [ 11.032000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
- [ 16.552000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port2, 100Mbps, full-duplex
- [ 17.612000] device eth0.1 entered promiscuous mode
- [ 17.616000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port2, 100Mbps, full-duplex
- [ 17.624000] device eth0 entered promiscuous mode
- [ 17.632000] br-lan: port 1(eth0.1) entered forwarding state
- [ 17.636000] br-lan: port 1(eth0.1) entered forwarding state
- [ 19.640000] br-lan: port 1(eth0.1) entered forwarding state
- [ 29.564000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
- [ 29.580000] jffs2_build_filesystem(): unlocking the mtd device... done.
- [ 29.584000] jffs2_build_filesystem(): erasing all blocks after the end marker...
- BusyBox v1.19.4 (2013-08-04 14:01:01 CEST) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
- -----------------------------------------------------
- BARRIER BREAKER (Bleeding Edge, r36114)
- -----------------------------------------------------
- * 1/2 oz Galliano Pour all ingredients into
- * 4 oz cold Coffee an irish coffee mug filled
- * 1 1/2 oz Dark Rum with crushed ice. Stir.
- * 2 tsp. Creme de Cacao
- -----------------------------------------------------
- root@OpenWrt:/# done.
- [ 72.576000] jffs2: notice: (732) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
- [ 92.036000] device wlan0 entered promiscuous mode
- [ 92.080000] br-lan: port 2(wlan0) entered forwarding state
- [ 92.088000] br-lan: port 2(wlan0) entered forwarding state
- [ 94.092000] br-lan: port 2(wlan0) entered forwarding state
- [ 154.512000] br-lan: port 2(wlan0) entered disabled state
- [ 154.516000] br-lan: port 1(eth0.1) entered disabled state
- [ 154.536000] device eth0.1 left promiscuous mode
- [ 154.540000] device eth0 left promiscuous mode
- [ 154.544000] br-lan: port 1(eth0.1) entered disabled state
- [ 154.608000] device wlan0 left promiscuous mode
- [ 154.612000] br-lan: port 2(wlan0) entered disabled state
- [ 154.652000] device eth0.1 entered promiscuous mode
- [ 154.660000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port2, 100Mbps, full-duplex
- [ 154.668000] device eth0 entered promiscuous mode
- [ 154.688000] device wlan0 entered promiscuous mode
- [ 154.708000] br-lan: port 2(wlan0) entered forwarding state
- [ 154.712000] br-lan: port 2(wlan0) entered forwarding state
- [ 154.720000] br-lan: port 1(eth0.1) entered forwarding state
- [ 154.724000] br-lan: port 1(eth0.1) entered forwarding state
- [ 155.140000] device wlan0 left promiscuous mode
- [ 155.144000] br-lan: port 2(wlan0) entered disabled state
- [ 156.728000] br-lan: port 1(eth0.1) entered forwarding state
- [ 159.116000] wlan0: authenticate with 00:13:f7
- [ 159.136000] wlan0: send auth to 00:13:f7 (try 1/3)
- [ 159.144000] wlan0: authenticated
- [ 159.156000] wlan0: associate with 00:13:f7 (try 1/3)
- [ 159.164000] wlan0: RX AssocResp from 00:13:f7 (capab=0x411 status=0 aid=1)
- [ 159.172000] wlan0: associated
- [ 182.668000] bcm63xx_enetsw bcm63xx_enetsw.0: link DOWN on port2
- [ 194.672000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port2, 100Mbps, full-duplex
- [ 201.680000] bcm63xx_enetsw bcm63xx_enetsw.0: link DOWN on port2
- [ 205.684000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port2, 100Mbps, full-duplex
- \0x00
- CFE version 1.0.37-105.22-1 for BCM96368 (32bit,SP,BE)
- Build Date: Fri Mar 19 11:53:33 CST 2010 (jojopo@broadcom_v060.comtrend.com)
- Copyright (C) 2000-2009 Broadcom Corporation.
- Parallel flash device: name AM29DL800B, id 0x22cb size 8192KB
- Total Flash size: 8192K with 135 sectors
- Chip ID: BCM6368B2, MIPS: 400MHz
- Main Thread: TP0
- Total Memory: 67108864 bytes (64MB)
- Boot Address: 0xb8000000
- Board IP address : 192.168.1.1:ffffff00
- Host IP address : 192.168.1.100
- Gateway IP address :
- Run from flash/host (f/h) : f
- Default host run file name : vmlinux
- Default host flash file name : bcm963xx_fs_kernel
- Boot delay (0-9 seconds) : 1
- Board Id (0-14) : 96368M-1341N
- Number of MAC Addresses (1-32) : 11
- Base MAC Address : 64:68:0c:
- PSI Size (1-64) KBytes : 24
- Enable Backup PSI [0|1] : 0
- System Log Size (0-256) KBytes : 0
- Main Thread Number [0|1] : 0
- *** Press any key to stop auto run (1 seconds) ***
- Auto run second count down: 1\0x081\0x080
- Booting from only image (0xb8010000) ...
- Code Address: 0x80010000, Entry Address: 0x80010000
- LZMA: Prossible old LZMA format, trying to decompress..
- Decompression OK!
- Entry at 0x80010000
- Closing network.
- Disabling Switch ports.
- Flushing Receive Buffers...
- 13 buffers found.
- Closing DMA Channels.
- Starting program at 0x80010000
- [ 0.000000] Linux version 3.7.10 (pepe@debian) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #2 Sun Aug 4 15:50:21 CEST 2013
- [ 0.000000] Detected Broadcom 0x6368 CPU revision b2
- [ 0.000000] CPU frequency is 400 MHz
- [ 0.000000] 64MB of RAM installed
- [ 0.000000] registering 38 GPIOs
- [ 0.000000] board_bcm963xx: Boot address 0xb8000000
- [ 0.000000] board_bcm963xx: CFE version: 1.0.37-105.22
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
- [ 0.000000] board_bcm963xx: board name: 96368M-1341N
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 04000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
- [ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
- [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
- [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Memory: 61400k/65536k available (2335k kernel code, 4136k reserved, 603k data, 260k init, 0k highmem)
- [ 0.000000] NR_IRQS:128
- [ 0.000000] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
- [ 0.032000] pid_max: default: 32768 minimum: 301
- [ 0.036000] Mount-cache hash table entries: 512
- [ 0.040000] NET: Registered protocol family 16
- [ 0.048000] registering PCI controller with io_map_base unset
- [ 0.056000] bio: create slab <bio-0> at 0
- [ 0.060000] PCI host bridge to bus 0000:00
- [ 0.064000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
- [ 0.068000] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
- [ 0.072000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 0.088000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
- [ 0.092000] Switching to clocksource MIPS
- [ 0.100000] NET: Registered protocol family 2
- [ 0.104000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.112000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.120000] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.124000] TCP: reno registered
- [ 0.128000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.136000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.140000] NET: Registered protocol family 1
- [ 0.148000] audit: initializing netlink socket (disabled)
- [ 0.152000] type=2000 audit(0.152:1): initialized
- [ 0.160000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.164000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.176000] msgmni has been set to 119
- [ 0.180000] io scheduler noop registered
- [ 0.184000] io scheduler deadline registered (default)
- [ 0.192000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 10) is a bcm63xx_uart
- \0xca[ 0.200000] console [ttyS0] enabled, bootconsole disabled
- [ 0.200000] console [ttyS0] enabled, bootconsole disabled
- [ 0.212000] bcm63xx-rng bcm63xx-rng: registered RNG driver
- [ 0.220000] physmap platform flash device: 08000000 at 18000000
- [ 0.224000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
- [ 0.236000] Amd/Fujitsu Extended Query Table at 0x0040
- [ 0.240000] Amd/Fujitsu Extended Query version 1.1.
- [ 0.248000] number of CFI chips: 1
- [ 0.252000] bcm63xxpart: CFE boot tag found with version 6 and board type 96368M-1341N
- [ 0.260000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
- [ 0.264000] bcm63xxpart: Partition 1 is kernel offset 10100 and length 10ff00
- [ 0.272000] bcm63xxpart: Partition 2 is rootfs offset 120000 and length 6d0000
- [ 0.280000] bcm63xxpart: Partition 3 is nvram offset 7f0000 and length 10000
- [ 0.288000] bcm63xxpart: Partition 4 is linux offset 10000 and length 7e0000
- [ 0.296000] bcm63xxpart: Spare partition is offset 2f0004 and length 4ffffc
- [ 0.300000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
- [ 0.308000] Creating 5 MTD partitions on "physmap-flash.0":
- [ 0.316000] 0x000000000000-0x000000010000 : "CFE"
- [ 0.320000] 0x000000010100-0x000000120000 : "kernel"
- [ 0.328000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- [ 0.340000] 0x000000120000-0x0000007f0000 : "rootfs"
- [ 0.348000] mtd: partition "rootfs" set to be root filesystem
- [ 0.352000] mtd: partition "rootfs_data" created automatically, ofs=2F0000, len=500000
- [ 0.364000] 0x0000002f0000-0x0000007f0000 : "rootfs_data"
- [ 0.368000] 0x0000007f0000-0x000000800000 : "nvram"
- [ 0.376000] 0x000000010000-0x0000007f0000 : "linux"
- [ 0.384000] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542) v0.1.2
- [ 0.432000] b53_common: found switch: BCM63xx, rev 0
- [ 0.436000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
- [ 0.448000] TCP: cubic registered
- [ 0.448000] NET: Registered protocol family 17
- [ 0.456000] 8021q: 802.1Q VLAN Support v1.8
- [ 0.468000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
- [ 0.476000] Freeing unused kernel memory: 260k freed
- - preinit -
- Press the [f] key and hit [enter] to enter failsafe mode
- - regular preinit -
- [ 5.688000] jffs2: notice: (320) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 9 of xref (0 dead, 2 orphan) found.
- switching to jffs2
- - init -
- Please press Enter to activate this console.
- [ 7.672000] Compat-drivers backport release: compat-drivers-2013-01-21-1
- [ 7.680000] Backport based on wireless-testing.git master-2013-02-22
- [ 7.688000] compat.git: wireless-testing.git
- [ 7.732000] cfg80211: Calling CRDA to update world regulatory domain
- [ 7.740000] cfg80211: World regulatory domain updated:
- [ 7.744000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 7.752000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 7.760000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 7.768000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 7.776000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 7.784000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 8.652000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
- [ 10.240000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xc0260000, irq=21
- [ 10.252000] cfg80211: Calling CRDA for country: AW
- [ 10.256000] cfg80211: Regulatory domain changed to country: AW
- [ 10.260000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 10.268000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 10.276000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 10.284000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 10.292000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
- [ 10.312000] Button Hotplug driver version 0.4.1
- [ 10.348000] PPP generic driver version 2.4.2
- [ 10.616000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 10.752000] NET: Registered protocol family 24
- [ 10.780000] nf_conntrack version 0.5.0 (963 buckets, 3852 max)
- [ 11.128000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
- [ 13.980000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port2, 100Mbps, full-duplex
- [ 15.132000] device eth0.1 entered promiscuous mode
- [ 15.136000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port2, 100Mbps, full-duplex
- [ 15.144000] device eth0 entered promiscuous mode
- [ 15.156000] br-lan: port 1(eth0.1) entered forwarding state
- [ 15.164000] br-lan: port 1(eth0.1) entered forwarding state
- [ 17.168000] br-lan: port 1(eth0.1) entered forwarding state
- [ 22.352000] wlan0: authenticate with 00:13:f7
- [ 22.384000] wlan0: send auth to 00:13:f7: (try 1/3)
- [ 22.392000] wlan0: authenticated
- [ 22.412000] wlan0: associate with 00:13:f7: (try 1/3)
- [ 22.420000] wlan0: RX AssocResp from 00:13:f7: (capab=0x411 status=0 aid=1)
- [ 22.428000] wlan0: associated
- BusyBox v1.19.4 (2013-08-04 14:01:01 CEST) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
- -----------------------------------------------------
- BARRIER BREAKER (Bleeding Edge, r36114)
- -----------------------------------------------------
- * 1/2 oz Galliano Pour all ingredients into
- * 4 oz cold Coffee an irish coffee mug filled
- * 1 1/2 oz Dark Rum with crushed ice. Stir.
- * 2 tsp. Creme de Cacao
- -----------------------------------------------------
- root@OpenWrt:/# ifconfig
- br-lan Link encap:Ethernet HWaddr 64:68:0C:6F:A1:7E
- inet addr:192.168.3.1 Bcast:192.168.3.255 Mask:255.255.255.0
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:17 errors:0 dropped:0 overruns:0 frame:0
- TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:3639 (3.5 KiB) TX bytes:1229 (1.2 KiB)
- eth0 Link encap:Ethernet HWaddr 64:68:0C:6F:A1:7E
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:17 errors:0 dropped:0 overruns:0 frame:0
- TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:3945 (3.8 KiB) TX bytes:1295 (1.2 KiB)
- eth0.1 Link encap:Ethernet HWaddr 64:68:0C:6F:A1:7E
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:17 errors:0 dropped:0 overruns:0 frame:0
- TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:3639 (3.5 KiB) TX bytes:1229 (1.2 KiB)
- lo Link encap:Local Loopback
- inet addr:127.0.0.1 Mask:255.0.0.0
- UP LOOPBACK RUNNING MTU:65536 Metric:1
- RX packets:8 errors:0 dropped:0 overruns:0 frame:0
- TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:800 (800.0 B) TX bytes:800 (800.0 B)
- wlan0 Link encap:Ethernet HWaddr 00:19:70:5D:19:DD
- inet addr:192.168.1.121 Bcast:192.168.1.255 Mask:255.255.255.0
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:30 errors:0 dropped:0 overruns:0 frame:0
- TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:32
- RX bytes:3482 (3.4 KiB) TX bytes:3858 (3.7 KiB)
- root@OpenWrt:/# ls /etc/config
- \0x1b[0;0mdhcp\0x1b[0m \0x1b[0;0mfirewall\0x1b[0m \0x1b[0;0mnetwork\0x1b[0m \0x1b[0;0mucitrack\0x1b[0m \0x1b[0;0mwireless\0x1b[0m
- \0x1b[0;0mdropbear\0x1b[0m \0x1b[0;0mluci\0x1b[0m \0x1b[0;0msystem\0x1b[0m \0x1b[0;0muhttpd\0x1b[0m
- root@OpenWrt:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement