API tools faq
paste
Advertisement
this-is-bill

beagleboard nand problems

this-is-bill
May 6th, 2011
206
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.93 KB | None | 0 0
raw download clone embed print report
  1. Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24)
  2. Loading u-boot.bin from nand
  3.  
  4.  
  5. U-Boot 2011.03-rc1 (Apr 13 2011 - 20:52:36)
  6.  
  7. OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz
  8. OMAP3 Beagle board + LPDDR/NAND
  9. I2C: ready
  10. DRAM: 256 MiB
  11. NAND: 256 MiB
  12. MMC: OMAP SD/MMC: 0
  13. *** Warning - bad CRC, using default environment
  14.  
  15. In: serial
  16. Out: serial
  17. Err: serial
  18. Beagle Rev C4
  19. timed out in wait_for_pin: I2C_STAT=0
  20. No EEPROM on expansion board
  21. Die ID #7018000400000000040373050e01300b
  22. Hit any key to stop autoboot: 0
  23. Card did not respond to voltage select!
  24. The user button is currently NOT pressed.
  25. SD/MMC found on device 0
  26. MMC: block number 0x1 exceeds max(0x0)
  27. ** Can't read from device 0 **
  28.  
  29. ** Unable to use mmc 0:1 for fatload **
  30. ** Bad partition 2 **
  31. Booting from nand ...
  32.  
  33. NAND read: device 0 offset 0x280000, size 0x400000
  34. 4194304 bytes read: OK
  35. ## Booting kernel from Legacy Image at 80200000 ...
  36. Image Name: Angstrom/2.6.37/beagleboard
  37. Image Type: ARM Linux Kernel Image (uncompressed)
  38. Data Size: 3171392 Bytes = 3 MiB
  39. Load Address: 80008000
  40. Entry Point: 80008000
  41. Verifying Checksum ... OK
  42. Loading Kernel Image ... OK
  43. OK
  44.  
  45. Starting kernel ...
  46.  
  47. Uncompressing Linux... done, booting the kernel.
  48. [ 0.000000] Initializing cgroup subsys cpuset
  49. [ 0.000000] Initializing cgroup subsys cpu
  50. [ 0.000000] Linux version 2.6.37 (brockd@bd01pc02.AMERICAS.ROOT.PRI) (gcc ver
  51. sion 4.5.3 20110311 (prerelease) (GCC) ) #1 PREEMPT Thu Apr 14 18:48:44 CDT 2011
  52. [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
  53. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction ca
  54. che
  55. [ 0.000000] Machine: OMAP3 Beagle Board
  56. [ 0.000000] Beagle expansionboard: none
  57. [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
  58. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  59. [ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp 720mhz )
  60. [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
  61. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
  62. es: 61952
  63. [ 0.000000] Kernel command line: console=ttyO2,115200n8 mpurate=auto buddy=no
  64. ne camera=lbcm3m1 vram=12M omapfb.mode=dvi:640x480MR-16@60 omapdss.def_disp=dvi
  65. root=/dev/mtdblock4 rw rootfstype=jffs2
  66. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  67. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  68. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  69. [ 0.000000] allocated 1310720 bytes of page_cgroup
  70. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memor
  71. y cgroups
  72. [ 0.000000] Memory: 244MB = 244MB total
  73. [ 0.000000] Memory: 239700k/239700k available, 22444k reserved, 0K highmem
  74. [ 0.000000] Virtual kernel memory layout:
  75. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  76. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  77. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  78. [ 0.000000] vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
  79. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  80. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  81. [ 0.000000] .init : 0xc0008000 - 0xc003b000 ( 204 kB)
  82. [ 0.000000] .text : 0xc003b000 - 0xc05efa1c (5843 kB)
  83. [ 0.000000] .data : 0xc05f0000 - 0xc0633a80 ( 271 kB)
  84. [ 0.000000] Preemptable hierarchical RCU implementation.
  85. [ 0.000000] RCU-based detection of stalled CPUs is disabled.
  86. [ 0.000000] Verbose stalled-CPUs detection is disabled.
  87. [ 0.000000] NR_IRQS:402
  88. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
  89. [ 0.000000] Reprogramming SDRC clock to 332000000 Hz
  90. [ 0.000000] GPMC revision 5.0
  91. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupt
  92. s
  93. [ 0.000000] Total of 96 interrupts on 1 active controller
  94. [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
  95. [ 0.000000] Console: colour dummy device 80x30
  96. [ 0.000000] Calibrating delay loop... 486.31 BogoMIPS (lpj=1900544)
  97. [ 0.000000] pid_max: default: 32768 minimum: 301
  98. [ 0.000000] Mount-cache hash table entries: 512
  99. [ 0.000000] Initializing cgroup subsys ns
  100. [ 0.000000] ns_cgroup deprecated: consider using the 'clone_children' flag wi
  101. thout the ns_cgroup.
  102. [ 0.000000] Initializing cgroup subsys cpuacct
  103. [ 0.000000] Initializing cgroup subsys memory
  104. [ 0.000000] Initializing cgroup subsys devices
  105. [ 0.000000] Initializing cgroup subsys freezer
  106. [ 0.000000] CPU: Testing write buffer coherency: ok
  107. [ 0.000000] devtmpfs: initialized
  108. [ 0.000000] regulator: core version 0.5
  109. [ 0.000000] regulator: dummy:
  110. [ 0.000000] NET: Registered protocol family 16
  111. [ 0.000000] OMAP GPIO hardware version 2.5
  112. [ 0.000000] OMAP GPIO hardware version 2.5
  113. [ 0.000000] OMAP GPIO hardware version 2.5
  114. [ 0.000000] OMAP GPIO hardware version 2.5
  115. [ 0.000000] OMAP GPIO hardware version 2.5
  116. [ 0.000000] OMAP GPIO hardware version 2.5
  117. [ 0.000000] omap_mux_init: Add partition: #1: core, flags: 0
  118. [ 0.000000] OMAP3 Beagle Rev: C4
  119. [ 0.000000] Found NAND on CS0
  120. [ 0.000000] Registering NAND on CS0
  121. [ 0.000000] Unable to get DVI reset GPIO
  122. [ 0.000000] platform iva.0: Enabled OPP corresponding to 720MHz
  123. [ 0.000000] hw-breakpoint: debug architecture 0x4 unsupported.
  124. [ 0.000000] OMAP DMA hardware revision 4.0
  125. [ 0.010833] bio: create slab <bio-0> at 0
  126. [ 0.012695] SCSI subsystem initialized
  127. [ 0.014648] usbcore: registered new interface driver usbfs
  128. [ 0.014862] usbcore: registered new interface driver hub
  129. [ 0.015136] usbcore: registered new device driver usb
  130. [ 0.015563] omap_device: omap_i2c.1: new worst case activate latency 0: 30517
  131. [ 0.025543] omap_i2c omap_i2c.1: bus 1 rev3.12 at 2600 kHz
  132. [ 0.035919] twl4030: PIH (irq 7) chaining IRQs 368..375
  133. [ 0.035980] twl4030: power (irq 373) chaining IRQs 376..383
  134. [ 0.036621] twl4030: gpio (irq 368) chaining IRQs 384..401
  135. [ 0.064208] regulator: VUSB1V5: 1500 mV normal standby
  136. [ 0.064819] regulator: VUSB1V8: 1800 mV normal standby
  137. [ 0.065368] regulator: VUSB3V1: 3100 mV normal standby
  138. [ 0.080810] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  139. [ 0.094909] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
  140. [ 0.095458] regulator: VDAC: 1800 mV normal standby
  141. [ 0.096008] regulator: VDVI: 1800 mV normal standby
  142. [ 0.096649] regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
  143. [ 0.096832] omap_device: omap_i2c.1: new worst case deactivate latency 0: 305
  144. 17
  145. [ 0.096984] omap_i2c omap_i2c.2: bus 2 rev3.12 at 400 kHz
  146. [ 0.097534] omap_i2c omap_i2c.3: bus 3 rev3.12 at 100 kHz
  147. [ 0.098754] Advanced Linux Sound Architecture Driver Version 1.0.23.
  148. [ 0.099548] Switching to clocksource 32k_counter
  149. [ 0.118896] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
  150. [ 0.125274] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DM
  151. A, IRQ 92
  152. [ 0.125854] NET: Registered protocol family 2
  153. [ 0.126159] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  154. [ 0.126892] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  155. [ 0.127136] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  156. [ 0.127258] TCP: Hash tables configured (established 8192 bind 8192)
  157. [ 0.127288] TCP reno registered
  158. [ 0.127319] UDP hash table entries: 256 (order: 0, 4096 bytes)
  159. [ 0.127349] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  160. [ 0.127655] NET: Registered protocol family 1
  161. [ 0.128387] RPC: Registered udp transport module.
  162. [ 0.128417] RPC: Registered tcp transport module.
  163. [ 0.128448] RPC: Registered tcp NFSv4.1 backchannel transport module.
  164. [ 0.129028] platform iva.0: Enabled OPP corresponding to 720MHz
  165. [ 0.129699] omap-iommu omap-iommu.0: isp registered
  166. [ 0.132324] VFS: Disk quotas dquot_6.5.2
  167. [ 0.132476] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  168. [ 0.134185] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  169. [ 0.135131] JFFS2 version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc.
  170. [ 0.136291] msgmni has been set to 468
  171. [ 0.138671] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
  172. 54)
  173. [ 0.138702] io scheduler noop registered
  174. [ 0.138793] io scheduler deadline registered
  175. [ 0.139038] io scheduler cfq registered (default)
  176. [ 0.201446] OMAP DSS rev 2.0
  177. [ 0.201568] OMAP DISPC rev 3.0
  178. [ 0.201629] OMAP VENC rev 2
  179. [ 0.201873] OMAP DSI rev 1.0
  180. [ 0.530609] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  181. [ 0.646850] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  182. [ 0.677856] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  183. [ 0.709106] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  184. [ 1.416961] console [ttyO2] enabled
  185. [ 1.454620] brd: module loaded
  186. [ 1.463500] loop: module loaded
  187. [ 1.468841] omap2-nand driver initializing
  188. [ 1.473480] ONFI flash detected
  189. [ 1.477111] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron )
  190. [ 1.484588] cmdlinepart partition parsing not available
  191. [ 1.490081] Creating 5 MTD partitions on "omap2-nand.0":
  192. [ 1.495727] 0x000000000000-0x000000080000 : "X-Loader"
  193. [ 1.503234] 0x000000080000-0x000000260000 : "U-Boot"
  194. [ 1.510955] 0x000000260000-0x000000280000 : "U-Boot Env"
  195. [ 1.518341] 0x000000280000-0x000000680000 : "Kernel"
  196. [ 1.526916] 0x000000680000-0x000010000000 : "File System"
  197. [ 1.637481] usbcore: registered new interface driver catc
  198. [ 1.643249] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
  199. [ 1.649597] usbcore: registered new interface driver kaweth
  200. [ 1.655487] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet dr
  201. iver
  202. [ 1.663452] usbcore: registered new interface driver pegasus
  203. [ 1.669403] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
  204. [ 1.676727] usbcore: registered new interface driver rtl8150
  205. [ 1.682800] usbcore: registered new interface driver asix
  206. [ 1.688598] usbcore: registered new interface driver cdc_ether
  207. [ 1.695037] usbcore: registered new interface driver dm9601
  208. [ 1.700988] usbcore: registered new interface driver smsc95xx
  209. [ 1.707153] usbcore: registered new interface driver gl620a
  210. [ 1.713134] usbcore: registered new interface driver net1080
  211. [ 1.719207] usbcore: registered new interface driver plusb
  212. [ 1.725097] usbcore: registered new interface driver rndis_host
  213. [ 1.731384] usbcore: registered new interface driver cdc_subset
  214. [ 1.737731] usbcore: registered new interface driver zaurus
  215. [ 1.743713] usbcore: registered new interface driver MOSCHIP usb-ethernet dri
  216. ver
  217. [ 1.752166] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  218. [ 1.759155] ehci-omap.0 supply hsusb0 not found, using dummy regulator
  219. [ 1.766082] ehci-omap.0 supply hsusb1 not found, using dummy regulator
  220. [ 3.787170] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  221. [ 3.793609] ehci-omap ehci-omap.0: new USB bus registered, assigned bus numbe
  222. r 1
  223. [ 3.802978] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  224. [ 3.818511] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  225. [ 3.824645] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  226. [ 3.831817] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=
  227. 1
  228. [ 3.839447] usb usb1: Product: OMAP-EHCI Host Controller
  229. [ 3.845031] usb usb1: Manufacturer: Linux 2.6.37 ehci_hcd
  230. [ 3.850738] usb usb1: SerialNumber: ehci-omap.0
  231. [ 3.856445] hub 1-0:1.0: USB hub found
  232. [ 3.860473] hub 1-0:1.0: 3 ports detected
  233. [ 3.896728] Initializing USB Mass Storage driver...
  234. [ 3.902038] usbcore: registered new interface driver usb-storage
  235. [ 3.908386] USB Mass Storage support registered.
  236. [ 3.913879] mice: PS/2 mouse device common for all mice
  237. [ 3.920104] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  238. [ 3.937225] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c
  239. -1/1-0049/twl4030_pwrbutton/input/input1
  240. [ 3.949188] i2c /dev entries driver
  241. [ 3.953918] Linux media interface: v0.10
  242. [ 3.958129] Linux video capture interface: v2.00
  243. [ 3.963439] vpfe_init
  244. [ 3.966613] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  245. [ 3.973419] cpuidle: using governor ladder
  246. [ 3.977813] cpuidle: using governor menu
  247. [ 3.985198] mmci-omap-hs: probe of mmci-omap-hs.1 failed with error -16
  248. [ 3.995880] usbcore: registered new interface driver usbhid
  249. [ 4.001831] usbhid: USB HID core driver
  250. [ 4.006530] usbcore: registered new interface driver snd-usb-audio
  251. [ 4.013916] OMAP3 Beagle/Devkit8000 SoC init
  252. [ 4.105285] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
  253. [ 4.116149] ALSA device list:
  254. [ 4.119262] #0: omap3beagle
  255. [ 4.122375] oprofile: hardware counters not available
  256. [ 4.127716] oprofile: using timer interrupt.
  257. [ 4.132507] TCP cubic registered
  258. [ 4.135894] NET: Registered protocol family 17
  259. [ 4.140686] NET: Registered protocol family 15
  260. [ 4.145385] lib80211: common routines for IEEE802.11 drivers
  261. [ 4.151397] Registering the dns_resolver key type
  262. [ 4.156463] VFP support v0.3: implementor 41 architecture 3 part 30 variant c
  263. rev 1
  264. [ 4.164672] ThumbEE CPU extension supported.
  265. [ 4.171325] Power Management for TI OMAP3.
  266. [ 4.176544] sr_init: No PMIC hook to init smartreflex
  267. [ 4.182128] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver init
  268. ialized
  269. [ 4.190490] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver init
  270. ialized
  271. [ 4.198852] SmartReflex Class3 initialized
  272. [ 4.210723] clock: disabling unused clocks to save power
  273. [ 4.217163] platform iva.0: omap_voltage_scale: Already at the requestedrate
  274. 360000000
  275. [ 4.225524] platform mpu.0: omap_voltage_scale: Already at the requestedrate
  276. 500000000
  277. [ 4.233886] platform l3_main.0: omap_voltage_scale: Already at the requestedr
  278. ate 166000000
  279. [ 4.243621] registered taskstats version 1
  280. [ 4.249603] fbcvt: 640x480@60: CVT Name - .307M3-R
  281. [ 4.268157] Console: switching to colour frame buffer device 80x30
  282. [ 4.283782] regulator_init_complete: incomplete constraints, leaving VDAC on
  283. [ 4.292022] omap_vout omap_vout: Buffer Size = 3686400
  284. [ 4.298797] omap_vout omap_vout: : registered and initialized video device 0
  285. [ 5.436187] mtd->read(0x1fea8 bytes from 0xcce0158) returned ECC error
  286. [ 5.591156] mtd->read(0x16c4 bytes from 0xe6de13c) returned ECC error
  287. [ 5.603149] mtd->read(0xa14 bytes from 0xe81edec) returned ECC error
  288. [ 5.622589] mtd->read(0x35e8 bytes from 0xe8bc218) returned ECC error
  289. [ 5.632629] mtd->read(0x31c8 bytes from 0xe8dc638) returned ECC error
  290. [ 5.642272] mtd->read(0x2a90 bytes from 0xe8fcd70) returned ECC error
  291. [ 5.663391] mtd->read(0x2e38 bytes from 0xe99c9c8) returned ECC error
  292. [ 5.684509] mtd->read(0x312c bytes from 0xea3c6d4) returned ECC error
  293. [ 5.700195] mtd->read(0x2ebc bytes from 0xea9c944) returned ECC error
  294. [ 5.710205] mtd->read(0x3178 bytes from 0xeabc688) returned ECC error
  295. [ 5.724090] mtd->read(0x664 bytes from 0xeb1f19c) returned ECC error
  296. [ 5.735656] mtd->read(0x6214 bytes from 0xeb795ec) returned ECC error
  297. [ 5.746856] mtd->read(0x4588 bytes from 0xeb9b278) returned ECC error
  298. [ 5.757019] mtd->read(0x3194 bytes from 0xebbc66c) returned ECC error
  299. [ 5.767364] mtd->read(0x4190 bytes from 0xebdb670) returned ECC error
  300. [ 5.777435] mtd->read(0x2298 bytes from 0xebfd568) returned ECC error
  301. [ 5.799255] mtd->read(0x6d0 bytes from 0xef9f130) returned ECC error
  302. [ 5.806884] mtd->read(0x6ac bytes from 0xefbf154) returned ECC error
  303. [ 5.815093] mtd->read(0x174 bytes from 0xefff68c) returned ECC error
  304. [ 5.831481] mtd->read(0x274 bytes from 0xf0ff58c) returned ECC error
  305. [ 5.846801] mtd->read(0x1e0 bytes from 0xf2df620) returned ECC error
  306. [ 5.855407] mtd->read(0x1cc bytes from 0xf35f634) returned ECC error
  307. [ 5.865753] mtd->read(0x610 bytes from 0xf43f1f0) returned ECC error
  308. [ 5.900207] JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building
  309. xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 or
  310. phan) found.
  311. [ 5.916809] mtd->read(0x59c bytes from 0xf947a64) returned ECC error
  312. [ 5.923889] mtd->read(0x530 bytes from 0xf946ad0) returned ECC error
  313. [ 5.931610] mtd->read(0x108 bytes from 0xf865ef8) returned ECC error
  314. [ 5.939270] mtd->read(0x688 bytes from 0xf0c1178) returned ECC error
  315. [ 5.946777] mtd->read(0x51c bytes from 0xf0b82e4) returned ECC error
  316. [ 5.953704] mtd->read(0x124 bytes from 0xefafedc) returned ECC error
  317. [ 5.960784] mtd->read(0x44 bytes from 0xf865ef8) returned ECC error
  318. [ 5.967712] VFS: Mounted root (jffs2 filesystem) on device 31:4.
  319. [ 5.974304] mtd->read(0x680 bytes from 0xf946980) returned ECC error
  320. [ 5.981445] mtd->read(0x118 bytes from 0xf9466e8) returned ECC error
  321. [ 5.988281] mtd->read(0x264 bytes from 0xf94659c) returned ECC error
  322. [ 5.995574] mtd->read(0x64c bytes from 0xf9461b4) returned ECC error
  323. [ 6.002746] mtd->read(0x230 bytes from 0xf945dd0) returned ECC error
  324. [ 6.010040] mtd->read(0x61c bytes from 0xf9459e4) returned ECC error
  325. [ 6.017303] mtd->read(0x208 bytes from 0xf9455f8) returned ECC error
  326. [ 6.024566] mtd->read(0x5f8 bytes from 0xf945208) returned ECC error
  327. [ 6.031768] mtd->read(0x1e8 bytes from 0xf944e18) returned ECC error
  328. [ 6.039031] mtd->read(0x5dc bytes from 0xf944a24) returned ECC error
  329. [ 6.046173] mtd->read(0x1c8 bytes from 0xf944638) returned ECC error
  330. [ 6.053466] mtd->read(0x63c bytes from 0xf9401c4) returned ECC error
  331. [ 6.060363] mtd->read(0x680 bytes from 0xf940180) returned ECC error
  332. [ 6.067321] mtd->read(0x6c4 bytes from 0xf94013c) returned ECC error
  333. [ 6.074737] mtd->read(0x148 bytes from 0xf5d56b8) returned ECC error
  334. [ 6.081573] mtd->read(0x1bc bytes from 0xf5d5644) returned ECC error
  335. [ 6.088409] mtd->read(0x230 bytes from 0xf5d55d0) returned ECC error
  336. [ 6.095245] mtd->read(0x2a4 bytes from 0xf5d555c) returned ECC error
  337. [ 6.103240] mtd->read(0x168 bytes from 0xf31d698) returned ECC error
  338. [ 6.110229] mtd->read(0x138 bytes from 0xede26c8) returned ECC error
  339. [ 6.117065] mtd->read(0x1ac bytes from 0xede2654) returned ECC error
  340. [ 6.123901] mtd->read(0x220 bytes from 0xede25e0) returned ECC error
  341. [ 6.130676] mtd->read(0x298 bytes from 0xede2568) returned ECC error
  342. [ 6.138916] mtd->read(0x16c bytes from 0xeb98694) returned ECC error
  343. [ 6.145690] mtd->read(0x1e0 bytes from 0xeb98620) returned ECC error
  344. [ 6.152526] mtd->read(0x25c bytes from 0xeb985a4) returned ECC error
  345. [ 6.159362] mtd->read(0x2d8 bytes from 0xeb98528) returned ECC error
  346. [ 6.166748] mtd->read(0x12c bytes from 0xe6cced4) returned ECC error
  347. [ 6.173553] mtd->read(0x1a8 bytes from 0xe6cce58) returned ECC error
  348. [ 6.180419] mtd->read(0x224 bytes from 0xe6ccddc) returned ECC error
  349. [ 6.187255] mtd->read(0x29c bytes from 0xe6ccd64) returned ECC error
  350. [ 6.194152] devtmpfs: mounted
  351. [ 6.197326] Freeing init memory: 204K
  352. [ 6.201446] mtd->read(0x2b8 bytes from 0xf0bb548) returned ECC error
  353. [ 6.208648] mtd->read(0x128 bytes from 0xf0b86d8) returned ECC error
  354. [ 6.215515] mtd->read(0x19c bytes from 0xf0b8664) returned ECC error
  355. [ 6.222381] mtd->read(0x220 bytes from 0xf0b85e0) returned ECC error
  356. [ 6.229217] mtd->read(0x2b8 bytes from 0xf0b8548) returned ECC error
  357. [ 6.236053] mtd->read(0x2fc bytes from 0xf0b8504) returned ECC error
  358. [ 6.243652] mtd->read(0x508 bytes from 0xf08eaf8) returned ECC error
  359. [ 6.250549] mtd->read(0x58c bytes from 0xf08ea74) returned ECC error
  360. [ 6.257690] mtd->read(0x53c bytes from 0xf9402c4) returned ECC error
  361. [ 6.264648] mtd->read(0x618 bytes from 0xf08e9e8) returned ECC error
  362. [ 6.27160�
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!