API tools faq
paste
Guest User

smartlog

a guest
Jul 8th, 2011
113
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 9.62 KB | None | 0 0
raw download clone embed print report
  1. smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
  2. Home page is http://smartmontools.sourceforge.net/
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model:     SAMSUNG HD204UI
  6. Serial Number:    S2H7J9BB111837
  7. Firmware Version: 1AQ10001
  8. User Capacity:    2,000,398,934,016 bytes
  9. Device is:        In smartctl database [for details use: -P show]
  10. ATA Version is:   8
  11. ATA Standard is:  Not recognized. Minor revision code: 0x28
  12. Local Time is:    Fri Jul  8 11:24:31 2011 CEST
  13.  
  14. ==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.
  15.  
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21.  
  22. General SMART Values:
  23. Offline data collection status:  (0x00) Offline data collection activity
  24.                     was never started.
  25.                     Auto Offline Data Collection: Disabled.
  26. Self-test execution status:      (   0) The previous self-test routine completed
  27.                     without error or no self-test has ever
  28.                     been run.
  29. Total time to complete Offline
  30. data collection:         (20760) seconds.
  31. Offline data collection
  32. capabilities:            (0x5b) SMART execute Offline immediate.
  33.                     Auto Offline data collection on/off support.
  34.                     Suspend Offline collection upon new
  35.                     command.
  36.                     Offline surface scan supported.
  37.                     Self-test supported.
  38.                     No Conveyance Self-test supported.
  39.                     Selective Self-test supported.
  40. SMART capabilities:            (0x0003) Saves SMART data before entering
  41.                     power-saving mode.
  42.                     Supports SMART auto save timer.
  43. Error logging capability:        (0x01) Error logging supported.
  44.                     General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time:    (   2) minutes.
  47. Extended self-test routine
  48. recommended polling time:    ( 255) minutes.
  49. SCT capabilities:          (0x003f) SCT Status supported.
  50.                     SCT Feature Control supported.
  51.                     SCT Data Table supported.
  52.  
  53. SMART Attributes Data Structure revision number: 16
  54. Vendor Specific SMART Attributes with Thresholds:
  55. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  56.   1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       1641
  57.   2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  58.   3 Spin_Up_Time            0x0023   068   067   025    Pre-fail  Always       -       9984
  59.   4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       6
  60.   5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  61.   7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  62.   8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  63.   9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       1148
  64.  10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
  65.  11 Calibration_Retry_Count 0x0032   252   252   000    Old_age   Always       -       0
  66.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       9
  67. 181 Unknown_Attribute       0x0022   252   252   000    Old_age   Always       -       0
  68. 191 G-Sense_Error_Rate      0x0022   252   252   000    Old_age   Always       -       0
  69. 192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
  70. 194 Temperature_Celsius     0x0002   064   064   000    Old_age   Always       -       33 (Lifetime Min/Max 21/37)
  71. 195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
  72. 196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
  73. 197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       5
  74. 198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
  75. 199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
  76. 200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       45
  77. 223 Load_Retry_Count        0x0032   252   252   000    Old_age   Always       -       0
  78. 225 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       9
  79.  
  80. SMART Error Log Version: 1
  81. ATA Error Count: 6 (device log contains only the most recent five errors)
  82.     CR = Command Register [HEX]
  83.     FR = Features Register [HEX]
  84.     SC = Sector Count Register [HEX]
  85.     SN = Sector Number Register [HEX]
  86.     CL = Cylinder Low Register [HEX]
  87.     CH = Cylinder High Register [HEX]
  88.     DH = Device/Head Register [HEX]
  89.     DC = Device Command Register [HEX]
  90.     ER = Error register [HEX]
  91.     ST = Status register [HEX]
  92. Powered_Up_Time is measured from power on, and printed as
  93. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  94. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  95.  
  96. Error 6 occurred at disk power-on lifetime: 347 hours (14 days + 11 hours)
  97.   When the command that caused the error occurred, the device was active or idle.
  98.  
  99.   After command completion occurred, registers were:
  100.   ER ST SC SN CL CH DH
  101.   -- -- -- -- -- -- --
  102.   10 51 00 00 ff ff ef  Error: IDNF at LBA = 0x0fffff00 = 268435200
  103.  
  104.   Commands leading to the command that caused the error were:
  105.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  106.   -- -- -- -- -- -- -- --  ----------------  --------------------
  107.   c8 00 00 00 ff ff ef 08      00:20:49.220  READ DMA
  108.   ec 00 00 00 ff ff a0 08      00:20:49.219  IDENTIFY DEVICE
  109.   c8 00 00 00 ff ff ef 08      00:20:49.219  READ DMA
  110.   ec 00 00 00 ff ff a0 08      00:20:49.219  IDENTIFY DEVICE
  111.   c8 00 00 00 ff ff ef 08      00:20:49.219  READ DMA
  112.  
  113. Error 5 occurred at disk power-on lifetime: 347 hours (14 days + 11 hours)
  114.   When the command that caused the error occurred, the device was active or idle.
  115.  
  116.   After command completion occurred, registers were:
  117.   ER ST SC SN CL CH DH
  118.   -- -- -- -- -- -- --
  119.   10 51 00 00 ff ff ef  Error: IDNF at LBA = 0x0fffff00 = 268435200
  120.  
  121.   Commands leading to the command that caused the error were:
  122.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  123.   -- -- -- -- -- -- -- --  ----------------  --------------------
  124.   c8 00 00 00 ff ff ef 08      00:20:49.219  READ DMA
  125.   ec 00 00 00 ff ff a0 08      00:20:49.219  IDENTIFY DEVICE
  126.   c8 00 00 00 ff ff ef 08      00:20:49.219  READ DMA
  127.   ec 00 00 00 ff ff a0 08      00:20:49.219  IDENTIFY DEVICE
  128.   c8 00 00 00 ff ff ef 08      00:20:49.219  READ DMA
  129.  
  130. Error 4 occurred at disk power-on lifetime: 347 hours (14 days + 11 hours)
  131.   When the command that caused the error occurred, the device was active or idle.
  132.  
  133.   After command completion occurred, registers were:
  134.   ER ST SC SN CL CH DH
  135.   -- -- -- -- -- -- --
  136.   10 51 00 00 ff ff ef  Error: IDNF at LBA = 0x0fffff00 = 268435200
  137.  
  138.   Commands leading to the command that caused the error were:
  139.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  140.   -- -- -- -- -- -- -- --  ----------------  --------------------
  141.   c8 00 00 00 ff ff ef 08      00:20:49.219  READ DMA
  142.   ec 00 00 00 ff ff a0 08      00:20:49.219  IDENTIFY DEVICE
  143.   c8 00 00 00 ff ff ef 08      00:20:49.219  READ DMA
  144.   ec 00 00 00 ff ff a0 08      00:20:49.218  IDENTIFY DEVICE
  145.   c8 00 00 00 ff ff ef 08      00:20:49.218  READ DMA
  146.  
  147. Error 3 occurred at disk power-on lifetime: 347 hours (14 days + 11 hours)
  148.   When the command that caused the error occurred, the device was active or idle.
  149.  
  150.   After command completion occurred, registers were:
  151.   ER ST SC SN CL CH DH
  152.   -- -- -- -- -- -- --
  153.   10 51 00 00 ff ff ef  Error: IDNF at LBA = 0x0fffff00 = 268435200
  154.  
  155.   Commands leading to the command that caused the error were:
  156.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  157.   -- -- -- -- -- -- -- --  ----------------  --------------------
  158.   c8 00 00 00 ff ff ef 08      00:20:49.219  READ DMA
  159.   ec 00 00 00 ff ff a0 08      00:20:49.218  IDENTIFY DEVICE
  160.   c8 00 00 00 ff ff ef 08      00:20:49.218  READ DMA
  161.   ec 00 00 00 ff ff a0 08      00:20:49.218  IDENTIFY DEVICE
  162.   c8 00 00 00 ff ff ef 08      00:20:49.218  READ DMA
  163.  
  164. Error 2 occurred at disk power-on lifetime: 347 hours (14 days + 11 hours)
  165.   When the command that caused the error occurred, the device was active or idle.
  166.  
  167.   After command completion occurred, registers were:
  168.   ER ST SC SN CL CH DH
  169.   -- -- -- -- -- -- --
  170.   10 51 00 00 ff ff ef  Error: IDNF at LBA = 0x0fffff00 = 268435200
  171.  
  172.   Commands leading to the command that caused the error were:
  173.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  174.   -- -- -- -- -- -- -- --  ----------------  --------------------
  175.   c8 00 00 00 ff ff ef 08      00:20:49.218  READ DMA
  176.   ec 00 00 00 ff ff a0 08      00:20:49.218  IDENTIFY DEVICE
  177.   c8 00 00 00 ff ff ef 08      00:20:49.218  READ DMA
  178.   25 00 00 00 fb ff e0 08      00:20:49.218  READ DMA EXT
  179.   c8 00 00 00 fa ff ef 08      00:20:49.218  READ DMA
  180.  
  181. SMART Self-test log structure revision number 1
  182. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  183.  
  184.  
  185. SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
  186. SMART Selective self-test log data structure revision number 0
  187. Warning: ATA Specification requires selective self-test log data structure revision number = 1
  188.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  189.     1        0        0  Completed [00% left] (0-65535)
  190.     2        0        0  Not_testing
  191.     3        0        0  Not_testing
  192.     4        0        0  Not_testing
  193.     5        0        0  Not_testing
  194. Selective self-test flags (0x0):
  195.   After scanning selected spans, do NOT read-scan remainder of disk.
  196. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!