Advertisement
Guest User

smartctl output raidz1 replace issue

a guest
Jan 11th, 2015
325
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 27.10 KB | None | 0 0
  1. smartctl -a /dev/sda
  2. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-43-generic] (local build)
  3. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Seagate Barracuda 7200.14 (AF)
  7. Device Model: ST3000DM001-1CH166
  8. Serial Number: W1F1M2C6
  9. LU WWN Device Id: 5 000c50 05cdf990e
  10. Firmware Version: CC24
  11. User Capacity: 3,000,592,982,016 bytes [3.00 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Rotation Rate: 7200 rpm
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ATA8-ACS T13/1699-D revision 4
  16. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  17. Local Time is: Sun Jan 11 16:29:53 2015 EST
  18.  
  19. ==> WARNING: A firmware update for this drive may be available,
  20. see the following Seagate web pages:
  21. http://knowledge.seagate.com/articles/en_US/FAQ/207931en
  22. http://knowledge.seagate.com/articles/en_US/FAQ/223651en
  23.  
  24. SMART support is: Available - device has SMART capability.
  25. SMART support is: Enabled
  26.  
  27. === START OF READ SMART DATA SECTION ===
  28. SMART overall-health self-assessment test result: PASSED
  29.  
  30. General SMART Values:
  31. Offline data collection status: (0x82) Offline data collection activity
  32. was completed without error.
  33. Auto Offline Data Collection: Enabled.
  34. Self-test execution status: ( 0) The previous self-test routine completed
  35. without error or no self-test has ever
  36. been run.
  37. Total time to complete Offline
  38. data collection: ( 584) seconds.
  39. Offline data collection
  40. capabilities: (0x7b) SMART execute Offline immediate.
  41. Auto Offline data collection on/off support.
  42. Suspend Offline collection upon new
  43. command.
  44. Offline surface scan supported.
  45. Self-test supported.
  46. Conveyance Self-test supported.
  47. Selective Self-test supported.
  48. SMART capabilities: (0x0003) Saves SMART data before entering
  49. power-saving mode.
  50. Supports SMART auto save timer.
  51. Error logging capability: (0x01) Error logging supported.
  52. General Purpose Logging supported.
  53. Short self-test routine
  54. recommended polling time: ( 1) minutes.
  55. Extended self-test routine
  56. recommended polling time: ( 332) minutes.
  57. Conveyance self-test routine
  58. recommended polling time: ( 2) minutes.
  59. SCT capabilities: (0x3085) SCT Status supported.
  60.  
  61. SMART Attributes Data Structure revision number: 10
  62. Vendor Specific SMART Attributes with Thresholds:
  63. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  64. 1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 219965232
  65. 3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
  66. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 32
  67. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  68. 7 Seek_Error_Rate 0x000f 068 060 030 Pre-fail Always - 64536124713
  69. 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 16532
  70. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  71. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 32
  72. 183 Runtime_Bad_Block 0x0032 092 092 000 Old_age Always - 8
  73. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  74. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  75. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
  76. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  77. 190 Airflow_Temperature_Cel 0x0022 071 056 045 Old_age Always - 29 (Min/Max 27/39)
  78. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  79. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 19
  80. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 47
  81. 194 Temperature_Celsius 0x0022 029 044 000 Old_age Always - 29 (0 18 0 0 0)
  82. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  83. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  84. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  85. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 16524h+13m+29.721s
  86. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 20404595596
  87. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 46883558924
  88.  
  89. SMART Error Log Version: 1
  90. No Errors Logged
  91.  
  92. SMART Self-test log structure revision number 1
  93. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  94.  
  95.  
  96. SMART Selective self-test log data structure revision number 1
  97. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  98. 1 0 0 Not_testing
  99. 2 0 0 Not_testing
  100. 3 0 0 Not_testing
  101. 4 0 0 Not_testing
  102. 5 0 0 Not_testing
  103. Selective self-test flags (0x0):
  104. After scanning selected spans, do NOT read-scan remainder of disk.
  105. If Selective self-test is pending on power-up, resume after 0 minute delay.
  106.  
  107.  
  108. =============
  109.  
  110. smartctl -a /dev/sdb
  111. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-43-generic] (local build)
  112. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  113.  
  114. === START OF INFORMATION SECTION ===
  115. Model Family: Seagate Barracuda 7200.14 (AF)
  116. Device Model: ST3000DM001-1ER166
  117. Serial Number: W500JFME
  118. LU WWN Device Id: 5 000c50 07ccecaed
  119. Firmware Version: CC25
  120. User Capacity: 3,000,592,982,016 bytes [3.00 TB]
  121. Sector Sizes: 512 bytes logical, 4096 bytes physical
  122. Rotation Rate: 7200 rpm
  123. Device is: In smartctl database [for details use: -P show]
  124. ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
  125. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
  126. Local Time is: Sun Jan 11 16:30:27 2015 EST
  127.  
  128. ==> WARNING: A firmware update for this drive may be available,
  129. see the following Seagate web pages:
  130. http://knowledge.seagate.com/articles/en_US/FAQ/207931en
  131. http://knowledge.seagate.com/articles/en_US/FAQ/223651en
  132.  
  133. SMART support is: Available - device has SMART capability.
  134. SMART support is: Enabled
  135.  
  136. === START OF READ SMART DATA SECTION ===
  137. SMART overall-health self-assessment test result: PASSED
  138.  
  139. General SMART Values:
  140. Offline data collection status: (0x82) Offline data collection activity
  141. was completed without error.
  142. Auto Offline Data Collection: Enabled.
  143. Self-test execution status: ( 0) The previous self-test routine completed
  144. without error or no self-test has ever
  145. been run.
  146. Total time to complete Offline
  147. data collection: ( 80) seconds.
  148. Offline data collection
  149. capabilities: (0x7b) SMART execute Offline immediate.
  150. Auto Offline data collection on/off support.
  151. Suspend Offline collection upon new
  152. command.
  153. Offline surface scan supported.
  154. Self-test supported.
  155. Conveyance Self-test supported.
  156. Selective Self-test supported.
  157. SMART capabilities: (0x0003) Saves SMART data before entering
  158. power-saving mode.
  159. Supports SMART auto save timer.
  160. Error logging capability: (0x01) Error logging supported.
  161. General Purpose Logging supported.
  162. Short self-test routine
  163. recommended polling time: ( 1) minutes.
  164. Extended self-test routine
  165. recommended polling time: ( 327) minutes.
  166. Conveyance self-test routine
  167. recommended polling time: ( 2) minutes.
  168. SCT capabilities: (0x1085) SCT Status supported.
  169.  
  170. SMART Attributes Data Structure revision number: 10
  171. Vendor Specific SMART Attributes with Thresholds:
  172. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  173. 1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 239632616
  174. 3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always - 0
  175. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 7
  176. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  177. 7 Seek_Error_Rate 0x000f 070 060 030 Pre-fail Always - 11725956
  178. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 232
  179. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  180. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 6
  181. 183 Runtime_Bad_Block 0x0032 098 098 000 Old_age Always - 2
  182. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  183. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  184. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 1
  185. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  186. 190 Airflow_Temperature_Cel 0x0022 070 064 045 Old_age Always - 30 (Min/Max 24/33)
  187. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  188. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 4
  189. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 9
  190. 194 Temperature_Celsius 0x0022 030 040 000 Old_age Always - 30 (0 21 0 0 0)
  191. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  192. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  193. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  194. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 232h+46m+14.011s
  195. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2952611018
  196. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 25302897344
  197.  
  198. SMART Error Log Version: 1
  199. No Errors Logged
  200.  
  201. SMART Self-test log structure revision number 1
  202. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  203.  
  204.  
  205. SMART Selective self-test log data structure revision number 1
  206. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  207. 1 0 0 Not_testing
  208. 2 0 0 Not_testing
  209. 3 0 0 Not_testing
  210. 4 0 0 Not_testing
  211. 5 0 0 Not_testing
  212. Selective self-test flags (0x0):
  213. After scanning selected spans, do NOT read-scan remainder of disk.
  214. If Selective self-test is pending on power-up, resume after 0 minute delay.
  215.  
  216.  
  217. ==========
  218.  
  219. smartctl -a /dev/sdc
  220. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-43-generic] (local build)
  221. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  222.  
  223. === START OF INFORMATION SECTION ===
  224. Model Family: Seagate Barracuda 7200.14 (AF)
  225. Device Model: ST3000DM001-9YN166
  226. Serial Number: Z1F15FAV
  227. LU WWN Device Id: 5 000c50 04e46f249
  228. Firmware Version: CC4B
  229. User Capacity: 3,000,592,982,016 bytes [3.00 TB]
  230. Sector Sizes: 512 bytes logical, 4096 bytes physical
  231. Rotation Rate: 7200 rpm
  232. Device is: In smartctl database [for details use: -P show]
  233. ATA Version is: ATA8-ACS T13/1699-D revision 4
  234. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  235. Local Time is: Sun Jan 11 16:30:59 2015 EST
  236.  
  237. ==> WARNING: A firmware update for this drive may be available,
  238. see the following Seagate web pages:
  239. http://knowledge.seagate.com/articles/en_US/FAQ/207931en
  240. http://knowledge.seagate.com/articles/en_US/FAQ/223651en
  241.  
  242. SMART support is: Available - device has SMART capability.
  243. SMART support is: Enabled
  244.  
  245. === START OF READ SMART DATA SECTION ===
  246. SMART overall-health self-assessment test result: PASSED
  247.  
  248. General SMART Values:
  249. Offline data collection status: (0x82) Offline data collection activity
  250. was completed without error.
  251. Auto Offline Data Collection: Enabled.
  252. Self-test execution status: ( 0) The previous self-test routine completed
  253. without error or no self-test has ever
  254. been run.
  255. Total time to complete Offline
  256. data collection: ( 584) seconds.
  257. Offline data collection
  258. capabilities: (0x7b) SMART execute Offline immediate.
  259. Auto Offline data collection on/off support.
  260. Suspend Offline collection upon new
  261. command.
  262. Offline surface scan supported.
  263. Self-test supported.
  264. Conveyance Self-test supported.
  265. Selective Self-test supported.
  266. SMART capabilities: (0x0003) Saves SMART data before entering
  267. power-saving mode.
  268. Supports SMART auto save timer.
  269. Error logging capability: (0x01) Error logging supported.
  270. General Purpose Logging supported.
  271. Short self-test routine
  272. recommended polling time: ( 1) minutes.
  273. Extended self-test routine
  274. recommended polling time: ( 340) minutes.
  275. Conveyance self-test routine
  276. recommended polling time: ( 2) minutes.
  277. SCT capabilities: (0x3085) SCT Status supported.
  278.  
  279. SMART Attributes Data Structure revision number: 10
  280. Vendor Specific SMART Attributes with Thresholds:
  281. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  282. 1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 171199440
  283. 3 Spin_Up_Time 0x0003 097 092 000 Pre-fail Always - 0
  284. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 39
  285. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  286. 7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 167603581
  287. 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 16464
  288. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  289. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 32
  290. 183 Runtime_Bad_Block 0x0032 088 088 000 Old_age Always - 12
  291. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  292. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  293. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 0 0 2
  294. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  295. 190 Airflow_Temperature_Cel 0x0022 073 058 045 Old_age Always - 27 (Min/Max 25/30)
  296. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  297. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 28
  298. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1402
  299. 194 Temperature_Celsius 0x0022 027 042 000 Old_age Always - 27 (0 19 0 0 0)
  300. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  301. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  302. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  303. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 16097h+10m+46.587s
  304. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 172018805054442
  305. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 37965323805787
  306.  
  307. SMART Error Log Version: 1
  308. No Errors Logged
  309.  
  310. SMART Self-test log structure revision number 1
  311. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  312.  
  313.  
  314. SMART Selective self-test log data structure revision number 1
  315. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  316. 1 0 0 Not_testing
  317. 2 0 0 Not_testing
  318. 3 0 0 Not_testing
  319. 4 0 0 Not_testing
  320. 5 0 0 Not_testing
  321. Selective self-test flags (0x0):
  322. After scanning selected spans, do NOT read-scan remainder of disk.
  323. If Selective self-test is pending on power-up, resume after 0 minute delay.
  324.  
  325.  
  326. =========
  327.  
  328.  
  329. smartctl -a /dev/sde
  330. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-43-generic] (local build)
  331. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  332.  
  333. === START OF INFORMATION SECTION ===
  334. Model Family: Seagate Barracuda 7200.14 (AF)
  335. Device Model: ST3000DM001-9YN166
  336. Serial Number: Z1F15FCJ
  337. LU WWN Device Id: 5 000c50 04e46f5c8
  338. Firmware Version: CC4B
  339. User Capacity: 3,000,592,982,016 bytes [3.00 TB]
  340. Sector Sizes: 512 bytes logical, 4096 bytes physical
  341. Rotation Rate: 7200 rpm
  342. Device is: In smartctl database [for details use: -P show]
  343. ATA Version is: ATA8-ACS T13/1699-D revision 4
  344. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  345. Local Time is: Sun Jan 11 16:31:25 2015 EST
  346.  
  347. ==> WARNING: A firmware update for this drive may be available,
  348. see the following Seagate web pages:
  349. http://knowledge.seagate.com/articles/en_US/FAQ/207931en
  350. http://knowledge.seagate.com/articles/en_US/FAQ/223651en
  351.  
  352. SMART support is: Available - device has SMART capability.
  353. SMART support is: Enabled
  354.  
  355. === START OF READ SMART DATA SECTION ===
  356. SMART overall-health self-assessment test result: PASSED
  357.  
  358. General SMART Values:
  359. Offline data collection status: (0x82) Offline data collection activity
  360. was completed without error.
  361. Auto Offline Data Collection: Enabled.
  362. Self-test execution status: ( 0) The previous self-test routine completed
  363. without error or no self-test has ever
  364. been run.
  365. Total time to complete Offline
  366. data collection: ( 584) seconds.
  367. Offline data collection
  368. capabilities: (0x7b) SMART execute Offline immediate.
  369. Auto Offline data collection on/off support.
  370. Suspend Offline collection upon new
  371. command.
  372. Offline surface scan supported.
  373. Self-test supported.
  374. Conveyance Self-test supported.
  375. Selective Self-test supported.
  376. SMART capabilities: (0x0003) Saves SMART data before entering
  377. power-saving mode.
  378. Supports SMART auto save timer.
  379. Error logging capability: (0x01) Error logging supported.
  380. General Purpose Logging supported.
  381. Short self-test routine
  382. recommended polling time: ( 1) minutes.
  383. Extended self-test routine
  384. recommended polling time: ( 335) minutes.
  385. Conveyance self-test routine
  386. recommended polling time: ( 2) minutes.
  387. SCT capabilities: (0x3085) SCT Status supported.
  388.  
  389. SMART Attributes Data Structure revision number: 10
  390. Vendor Specific SMART Attributes with Thresholds:
  391. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  392. 1 Raw_Read_Error_Rate 0x000f 106 099 006 Pre-fail Always - 12313128
  393. 3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0
  394. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 35
  395. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  396. 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 168038890
  397. 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 16535
  398. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  399. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 35
  400. 183 Runtime_Bad_Block 0x0032 090 090 000 Old_age Always - 10
  401. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  402. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  403. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
  404. 189 High_Fly_Writes 0x003a 098 098 000 Old_age Always - 2
  405. 190 Airflow_Temperature_Cel 0x0022 072 056 045 Old_age Always - 28 (Min/Max 26/34)
  406. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  407. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 21
  408. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 51
  409. 194 Temperature_Celsius 0x0022 028 044 000 Old_age Always - 28 (0 19 0 0 0)
  410. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  411. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  412. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  413. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 16473h+58m+29.997s
  414. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 173303241944814
  415. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 33889195854221
  416.  
  417. SMART Error Log Version: 1
  418. No Errors Logged
  419.  
  420. SMART Self-test log structure revision number 1
  421. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  422.  
  423.  
  424. SMART Selective self-test log data structure revision number 1
  425. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  426. 1 0 0 Not_testing
  427. 2 0 0 Not_testing
  428. 3 0 0 Not_testing
  429. 4 0 0 Not_testing
  430. 5 0 0 Not_testing
  431. Selective self-test flags (0x0):
  432. After scanning selected spans, do NOT read-scan remainder of disk.
  433. If Selective self-test is pending on power-up, resume after 0 minute delay.
  434.  
  435.  
  436.  
  437. ==========
  438.  
  439. smartctl -a /dev/sdf
  440. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-43-generic] (local build)
  441. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  442.  
  443. === START OF INFORMATION SECTION ===
  444. Model Family: Seagate Barracuda 7200.14 (AF)
  445. Device Model: ST3000DM001-1ER166
  446. Serial Number: Z500765Z
  447. LU WWN Device Id: 5 000c50 06760e83c
  448. Firmware Version: CC43
  449. User Capacity: 3,000,592,982,016 bytes [3.00 TB]
  450. Sector Sizes: 512 bytes logical, 4096 bytes physical
  451. Rotation Rate: 7200 rpm
  452. Device is: In smartctl database [for details use: -P show]
  453. ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
  454. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
  455. Local Time is: Sun Jan 11 16:31:50 2015 EST
  456.  
  457. ==> WARNING: A firmware update for this drive may be available,
  458. see the following Seagate web pages:
  459. http://knowledge.seagate.com/articles/en_US/FAQ/207931en
  460. http://knowledge.seagate.com/articles/en_US/FAQ/223651en
  461.  
  462. SMART support is: Available - device has SMART capability.
  463. SMART support is: Enabled
  464.  
  465. === START OF READ SMART DATA SECTION ===
  466. SMART overall-health self-assessment test result: PASSED
  467.  
  468. General SMART Values:
  469. Offline data collection status: (0x82) Offline data collection activity
  470. was completed without error.
  471. Auto Offline Data Collection: Enabled.
  472. Self-test execution status: ( 0) The previous self-test routine completed
  473. without error or no self-test has ever
  474. been run.
  475. Total time to complete Offline
  476. data collection: ( 97) seconds.
  477. Offline data collection
  478. capabilities: (0x7b) SMART execute Offline immediate.
  479. Auto Offline data collection on/off support.
  480. Suspend Offline collection upon new
  481. command.
  482. Offline surface scan supported.
  483. Self-test supported.
  484. Conveyance Self-test supported.
  485. Selective Self-test supported.
  486. SMART capabilities: (0x0003) Saves SMART data before entering
  487. power-saving mode.
  488. Supports SMART auto save timer.
  489. Error logging capability: (0x01) Error logging supported.
  490. General Purpose Logging supported.
  491. Short self-test routine
  492. recommended polling time: ( 1) minutes.
  493. Extended self-test routine
  494. recommended polling time: ( 345) minutes.
  495. Conveyance self-test routine
  496. recommended polling time: ( 2) minutes.
  497. SCT capabilities: (0x1085) SCT Status supported.
  498.  
  499. SMART Attributes Data Structure revision number: 10
  500. Vendor Specific SMART Attributes with Thresholds:
  501. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  502. 1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 60918896
  503. 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
  504. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 4
  505. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  506. 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 17745467
  507. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 615
  508. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  509. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 3
  510. 183 Runtime_Bad_Block 0x0032 098 098 000 Old_age Always - 2
  511. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  512. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  513. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 0 0 3
  514. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  515. 190 Airflow_Temperature_Cel 0x0022 069 061 045 Old_age Always - 31 (Min/Max 29/39)
  516. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  517. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1
  518. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 6
  519. 194 Temperature_Celsius 0x0022 031 040 000 Old_age Always - 31 (0 19 0 0 0)
  520. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  521. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  522. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  523. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 615h+06m+14.735s
  524. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 5349915040
  525. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2949617398495
  526.  
  527. SMART Error Log Version: 1
  528. No Errors Logged
  529.  
  530. SMART Self-test log structure revision number 1
  531. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  532.  
  533.  
  534. SMART Selective self-test log data structure revision number 1
  535. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  536. 1 0 0 Not_testing
  537. 2 0 0 Not_testing
  538. 3 0 0 Not_testing
  539. 4 0 0 Not_testing
  540. 5 0 0 Not_testing
  541. Selective self-test flags (0x0):
  542. After scanning selected spans, do NOT read-scan remainder of disk.
  543. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement