API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Oct 29th, 2010
142
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.83 KB | None | 0 0
raw download clone embed print report
  1.  
  2. Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24)
  3. Reading boot sector
  4. Loading u-boot.bin from nand
  5.  
  6.  
  7. U-Boot 2009.11-rc1-00601-g3aa4b51 (Jan 05 2010 - 20:56:38)
  8.  
  9. OMAP3530-GP ES3.1, CPU-OPP2 L3-165MHz
  10. OMAP3 Beagle board + LPDDR/NAND
  11. I2C: ready
  12. DRAM: 256 MB
  13. NAND: 256 MiB
  14. *** Warning - bad CRC or NAND, using default environment
  15.  
  16. In: serial
  17. Out: serial
  18. Err: serial
  19. Board revision C4
  20. Die ID #050e00040000000004037d070c00b01d
  21. Hit any key to stop autoboot: 10  9  8  7  6  5  4  3  2  1  0
  22. mmc1 is available
  23. reading boot.scr
  24.  
  25. ** Unable to read "boot.scr" from mmc 0:1 **
  26. reading uImage
  27.  
  28. 3194688 bytes read
  29. Booting from mmc ...
  30. ## Booting kernel from Legacy Image at 82000000 ...
  31. Image Name: Angstrom/2.6.32/beagleboard
  32. Image Type: ARM Linux Kernel Image (uncompressed)
  33. Data Size: 3194624 Bytes = 3 MB
  34. Load Address: 80008000
  35. Entry Point: 80008000
  36. Verifying Checksum ... OK
  37. Loading Kernel Image ... OK
  38. OK
  39.  
  40. Starting kernel ...
  41.  
  42. Uncompressing Linux................................................................................................................................................................................................................ done, booting the kernel.
  43. [ 0.000000] Linux version 2.6.32 (koen@dominion) (gcc version 4.3.3 (GCC) ) #3 PREEMPT Thu Sep 16 13:13:36 CEST 2010
  44. [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
  45. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  46. [ 0.000000] Machine: OMAP3 Beagle Board
  47. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  48. [ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp 720m )
  49. [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
  50. [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
  51. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
  52. [ 0.000000] Kernel command line: console=ttyS2,115200n8 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
  53. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  54. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  55. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  56. [ 0.000000] Memory: 128MB 128MB = 256MB total
  57. [ 0.000000] Memory: 240384KB available (5896K code, 671K data, 204K init, 0K highmem)
  58. [ 0.000000] Hierarchical RCU implementation.
  59. [ 0.000000] NR_IRQS:402
  60. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/720 MHz
  61. [ 0.000000] Reprogramming SDRC clock to 332000000 Hz
  62. [ 0.000000] GPMC revision 5.0
  63. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  64. [ 0.000000] Total of 96 interrupts on 1 active controller
  65. [ 0.000000] OMAP GPIO hardware version 2.5
  66. [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
  67. [ 0.000000] Console: colour dummy device 80x30
  68. [ 0.000000] Calibrating delay loop... 710.07 BogoMIPS (lpj=2777088)
  69. [ 0.000000] Mount-cache hash table entries: 512
  70. [ 0.000000] CPU: Testing write buffer coherency: ok
  71. [ 0.000000] tmpfs: No value for mount option 'mode'
  72. [ 0.000000] devtmpfs: initialized
  73. [ 0.000000] regulator: core version 0.5
  74. [ 0.000000] NET: Registered protocol family 16
  75. [ 0.000000] Found NAND on CS0
  76. [ 0.000000] Registering NAND on CS0
  77. [ 0.000000] Unable to get DVI reset GPIO
  78. [ 20.876220] OMAP DMA hardware revision 4.0
  79. [ 20.882446] bio: create slab <bio-0> at 0
  80. [ 20.883636] SCSI subsystem initialized
  81. [ 20.884918] usbcore: registered new interface driver usbfs
  82. [ 20.885070] usbcore: registered new interface driver hub
  83. [ 20.885223] usbcore: registered new device driver usb
  84. [ 20.895782] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
  85. [ 20.898406] twl4030: PIH (irq 7) chaining IRQs 368..375
  86. [ 20.898437] twl4030: power (irq 373) chaining IRQs 376..383
  87. [ 20.898712] twl4030: gpio (irq 368) chaining IRQs 384..401
  88. [ 20.900085] regulator: VUSB1V5: 1500 mV normal standby
  89. [ 20.900299] regulator: VUSB1V8: 1800 mV normal standby
  90. [ 20.900512] regulator: VUSB3V1: 3100 mV normal standby
  91. [ 20.904083] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  92. [ 20.904479] regulator: VMMC1: 1850 <--> 3150 mV normal standby
  93. [ 20.904693] regulator: VDAC: 1800 mV normal standby
  94. [ 20.904907] regulator: VPLL2: 1800 mV normal standby
  95. [ 20.905151] regulator: VSIM: 1800 <--> 3000 mV normal standby
  96. [ 20.905487] regulator: VAUX3: 1800 mV normal standby
  97. [ 20.905792] regulator: VAUX4: 1800 mV normal standby
  98. [ 20.919006] i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz
  99. [ 20.919189] i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz
  100. [ 20.920318] Switching to clocksource 32k_counter
  101. [ 20.929351] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
  102. [ 20.929595] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
  103. [ 20.929595] musb_hdrc musb_hdrc: MUSB HDRC host driver
  104. [ 20.929718] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
  105. [ 20.929870] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  106. [ 20.929870] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  107. [ 20.929901] usb usb1: Product: MUSB HDRC host driver
  108. [ 20.929901] usb usb1: Manufacturer: Linux 2.6.32 musb-hcd
  109. [ 20.929901] usb usb1: SerialNumber: musb_hdrc
  110. [ 20.930511] hub 1-0:1.0: USB hub found
  111. [ 20.930541] hub 1-0:1.0: 1 port detected
  112. [ 20.931549] NET: Registered protocol family 2
  113. [ 20.931732] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  114. [ 20.932250] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  115. [ 20.932434] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  116. [ 20.932525] TCP: Hash tables configured (established 8192 bind 8192)
  117. [ 20.932525] TCP reno registered
  118. [ 20.932556] UDP hash table entries: 256 (order: 0, 4096 bytes)
  119. [ 20.932586] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  120. [ 20.932800] NET: Registered protocol family 1
  121. [ 20.933197] RPC: Registered udp transport module.
  122. [ 20.933227] RPC: Registered tcp transport module.
  123. [ 20.933227] RPC: Registered tcp NFSv4.1 backchannel transport module.
  124. [ 20.934112] omap-iommu omap-iommu.0: isp registered
  125. [ 20.935699] VFS: Disk quotas dquot_6.5.2
  126. [ 20.935791] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  127. [ 20.936859] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  128. [ 20.937622] JFFS2 version 2.2. (NAND) (SUMMAr1 : fa0ab000 r0 : cf82f108
  129. [ 23.504272] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
  130. [ 23.511718] Control: 10c5387d Table: 8fb6c019 DAC: 00000017
  131. [ 23.517486] Process swapper (pid: 0, stack limit = 0xc06242f0)
  132. [ 23.523345] Stack: (0xc0625ee0 to 0xc0626000)
  133. [ 23.527740] 5ee0: 2cc72f15 33390598 2d23d9bb 00000000 2cb41781 cf82f108 60000113 cf8a0940
  134. [ 23.535949] 5f00: c0624000 0000005c 00000000 00000000 c066bac0 c0341840 c0625f48 cf8a0940
  135. [ 23.544189] 5f20: c0639148 c00a4328 00000000 cf8a0940 c0639148 0000005c 00000002 00000001
  136. [ 23.552398] 5f40: c0624000 0000001f 00000000 c00a64f0 0000005c 00000000 c0627e84 c003b074
  137. [ 23.560638] 5f60: 00000001 ffffffff fa200000 c003bb44 00000000 80000113 80000113 00000000
  138. [ 23.568847] 5f80: c0624000 c0627fe0 c0627e84 c066facc 8002f154 411fc083 0000001f 00000000
  139. [ 23.577087] 5fa0: c0637138 c0625fbc c004ba8c c004c2e4 60000113 ffffffff 00000000 c003cfc4
  140. [ 23.585296] 5fc0: 00000000 c06b6ba0 c066fa90 c0031010 c0627e78 c0008984 c0008498 00000000
  141. [ 23.593536] 5fe0: 00000000 c0031010 10c53c7d c066fb20 c0031414 80008034 00000000 00000000
  142. [ 23.601776] [<c034161c>] (musb_interrupt+0x9f8/0xbb8) from [<c0341840>] (generic_interrupt+0x64/0xa8)
  143. [ 23.611053] [<c0341840>] (generic_interrupt+0x64/0xa8) from [<c00a4328>] (handle_IRQ_event+0xac/0x1ec)
  144. [ 23.620422] [<c00a4328>] (handle_IRQ_event+0xac/0x1ec) from [<c00a64f0>] (handle_level_irq+0xbc/0x148)
  145. [ 23.629791] [<c00a64f0>] (handle_level_irq+0xbc/0x148) from [<c003b074>] (asm_do_IRQ+0x74/0x98)
  146. [ 23.638549] [<c003b074>] (asm_do_IRQ+0x74/0x98) from [<c003bb44>] (__irq_svc+0x44/0xa8)
  147. [ 23.646606] Exception stack(0xc0625f70 to 0xc0625fb8)
  148. [ 23.651672] 5f60: 00000000 80000113 80000113 00000000
  149. [ 23.659881] 5f80: c0624000 c0627fe0 c0627e84 c066facc 8002f154 411fc083 0000001f 00000000
  150. [ 23.668121] 5fa0: c0637138 c0625fbc c004ba8c c004c2e4 60000113 ffffffff
  151. [ 23.674774] [<c003bb44>] (__irq_svc+0x44/0xa8) from [<c004c2e4>] (omap3_pm_idle+0x4c/0x50)
  152. [ 23.683105] [<c004c2e4>] (omap3_pm_idle+0x4c/0x50) from [<00000000>] (0x0)
  153. [ 23.690002] Code: e3530003 13a02000 05963078 05933018 (05d33014)
  154. [ 23.696197] ---[ end trace fc3ee06f6fdef128 ]---
  155. [ 23.700866] Kernel panic - not syncing: Fatal exception in interrupt
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!