Peter Teoh

dmesg output of MPC5125 Freescale board:

Script done on Wed 31 Dec 1969 08:50:39 PM EST
Using MPC5125 ADS machine description
Initializing cgroup subsys cpu
Linux version 2.6.29.1 (cys@MTC-SOFT-228) (gcc version 4.1.2) #110 PREEMPT Thu Mar 25 09:07:10 EDT 2010
MPC5125 ADS board from Freescale Semiconductor
preallocate_diu_videomemory: diu_size=5242880
preallocate_diu_videomemory: diu_mem=c07fc000
PSC0 psc_fifo_base:0 tx_fifo_size:00000060 rx_fifo_size:00000060
PSC1 psc_fifo_base:192 tx_fifo_size:00000004 rx_fifo_size:00000004
PSC9 psc_fifo_base:200 tx_fifo_size:00000004 rx_fifo_size:00000004
Top of RAM: 0x10000000, Total RAM: 0x10000000
Memory hole size: 0MB
Zone PFN ranges:
  DMA      0x00000000 -> 0x00010000
  Normal   0x00010000 -> 0x00010000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00010000
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat c0525328, node_mem_map c0cfd000
  DMA zone: 512 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 65024 pages, LIFO batch:15
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: root=/dev/mtdblock6 rw rootfstype=yaffs2 console=tty0,115200
IPIC (128 IRQ sources) at fdffbc00
PID hash table entries: 1024 (order: 10, 4096 bytes)
time_init: decrementer frequency = 49.152000 MHz
time_init: processor frequency   = 393.216000 MHz
clocksource: timebase mult[5161555] shift[22] registered
clockevent: decrementer mult[c95] shift[16] cpu[0]
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 248704k/262144k available (5084k kernel code, 13104k reserved, 192k data, 396k bss, 204k init)
Calibrating delay loop... 98.04 BogoMIPS (lpj=196096)
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
net_namespace: 992 bytes
NET: Registered protocol family 16
Could not initialize clk spdif_txclk without a calc routine
Could not initialize clk spdif_rxclk without a calc routine
register :mscan0_clk
register :mscan1_clk
mapped ioctl to d1004000 and gpioctl to d1008100
PCI: Probing PCI hardware
Registering ipic with sysfs...
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Freescale Elo / Elo Plus DMA driver
Freescale(R) MPC5121 DMA Engine found, 64 channels
fsldma: Self-test copy successfully
Switched to high resolution mode on CPU 0
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
audit: initializing netlink socket (disabled)
type=2000 audit(0.268:1): initialized
NTFS driver 2.1.29 [Flags: R/W].
fuse init (API version 7.11)
yaffs Mar 25 2010 09:06:04 Installing.
msgmni has been set to 486
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
fsl_diu_alloc: size=64
fsl_diu_alloc:219 rh virt=c07fc000 phys=7fc000
fsl_diu_alloc: size=1382400
fsl_diu_alloc:219 rh virt=c07fd000 phys=7fd000
Console: switching to colour frame buffer device 90x30
fb0: Panel0 fb device registered successfully.
fsl_diu_alloc: size=76800
fsl_diu_alloc:219 rh virt=c094f000 phys=94f000
fb1: Panel1 AOI0 fb device registered successfully.
fsl_diu_alloc: size=76800
fsl_diu_alloc:219 rh virt=c0962000 phys=962000
fb2: Panel1 AOI1 fb device registered successfully.
fsl_diu_alloc: size=76800
fsl_diu_alloc:219 rh virt=c0975000 phys=975000
fb3: Panel2 AOI0 fb device registered successfully.
fsl_diu_alloc: size=76800
fsl_diu_alloc:219 rh virt=c0988000 phys=988000
fb4: Panel2 AOI1 fb device registered successfully.
fsl_diu_alloc: size=32768
fsl_diu_alloc:219 rh virt=c099b000 phys=99b000
FSL_DIU_FB: registed FB device driver!
Generic non-volatile memory driver v1.1
Serial: MPC52xx PSC UART driver
80011100.serial: ttyPSC0 at MMIO 0x80011100 (irq = 40) is a MPC52xx PSC
80011900.serial: ttyPSC1 at MMIO 0x80011900 (irq = 40) is a MPC52xx PSC
brd: module loaded
usbcore: registered new interface driver ub
vcan: Virtual CAN interface driver
fsl-mscan initializing
can0 (fsl-mscan): not using net_device_ops yet
fsl-mscan fsl-mscan.0: probe port 0xD102C300 done, clk rate:98500000
can1 (fsl-mscan): not using net_device_ops yet
fsl-mscan fsl-mscan.1: probe port 0xD1030380 done, clk rate:98500000
eth0 (fs_enet): not using net_device_ops yet
eth0: fs_enet: 00:22:78:00:4a:a1
FEC MII Bus: probed
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
SCSI Media Changer driver v0.25
Driver 'ch' needs updating - please use bus_type methods
MPC5125 MTD nand Driver 0.5
NAND device: Manufacturer ID: 0x2c, Chip ID: 0x68 (Micron NAND 4GiB 3,3V 8-bit)
mpc5125_nfc 40000000.nfc: Using OF partition info
Creating 9 MTD partitions on "MPC5125 NAND":
0x000000000000-0x000000100000 : "loader"
0x000000100000-0x000000200000 : "uboot"
0x000000200000-0x000000300000 : "envirment"
0x000000300000-0x000000b00000 : "kernel"
0x000000b00000-0x000000c00000 : "device-tree"
0x000000c00000-0x000001400000 : "rootfs"
0x000001400000-0x000080000000 : "filesystem"
0x000080000000-0x000086400000 : "mqx"
0x000086400000-0x000100000000 : "data"
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 43, io mem 0x80003000
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Freescale On-Chip EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.1 ehci_hcd
usb usb1: SerialNumber: fsl-ehci.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
mice: PS/2 mouse device common for all mice
mpc5121-rtc 80000a00.rtc: rtc core: registered mpc5121-rtc as rtc0
sdhc: Freescale Enhanced Secure Digital Host Controller driver
slot 0 at 0x80001500, irq 23 and size = 100
mmc0: SDHC at 0x80001500 irq 23 PIO
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18a.
Freescale MPC5121 ADS ALSA SoC fabric driver
No device for DAI AC97 HiFi
No device for DAI psc0
AC97 SoC Audio Codec 0.6
asoc: AC97 HiFi <-> psc0 mapping ok
ALSA device list:
  #0: MPC5121 ADS (AC97)
TCP cubic registered
NET: Registered protocol family 17
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
can: raw protocol (rev 20090105)
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
registered taskstats version 1
mpc5121-rtc 80000a00.rtc: setting system clock to 1970-01-01 01:45:44 UTC (6344)
yaffs: dev is 32505862 name is "mtdblock6"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.6, "mtdblock6"
yaffs: restored from checkpoint
yaffs_read_super: isCheckpointed 1
VFS: Mounted root (yaffs2 filesystem) on device 31:6.
Freeing unused kernel memory: 204k init
save exit: isCheckpointed 1