Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.5.3-00283-g190cb64-dirty (liar@liar-desktop2) (gcc version 4.7.3 (GCC) ) #83 PREEMPT Sat Jan 11 18:43:16 CET 2014
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: Nokia RM-680 board
- [ 0.000000] Reserving 6291456 bytes SDRAM for VRAM
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] On node 0 totalpages: 258816
- [ 0.000000] free_area_init_node: node 0, pgdat c06df624, node_mem_map c0c14000
- [ 0.000000] Normal zone: 1520 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 189712 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 528 pages used for memmap
- [ 0.000000] HighMem zone: 67056 pages, LIFO batch:15
- [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
- [ 0.000000] Clocking rate (Crystal/Core/MPU): 38.4/390/600 MHz
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256768
- [ 0.000000] Kernel command line: init=/sbin/preinit root=/dev/mmcblk0p1 rootwait rootflags=errors=remount-ro rootfstype=ext4 rw mtdoops.mtddev=log mtdoops.record_size=65536 console=ttyS0,115200n8 mtdparts=omap2-onenand:1024k(bootloader),2816k@1024k(config),16384k@3840k(kernel),2048k@20224k(log),469248k@22272k(var),32768k@491520k(moslo) bootreason=sw_rst bootmode=normal nolo=2.3.6 product_name=RM-696 dbi-type=V5JW dbi-vendor=1 dbi-size=73 dbi-uid=01234142460010005011 imei=357923041053317 g_nokia.iSerialNumber=357923041053317 serialnumber=CCM955238 omap_sec.kci=958 gpio=cmt_apeslpx:93:sysfs:output,cmt_en:23:sysfs:init_active:output,cmt_rst_rq:88:sysfs:init_active:output,sleep_ind:92:sysfs:output omapdss.def_disp_enabled=1 vhash=285e93eebfdded180a3ffdf0a42c0d09b0d8ce8a product_model=N9 hwid=1501 vram=6m omapfb.vram=0:6M console=ttyS0,115200n8 omap3_die_id
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] allocated 2097152 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 747MB 264MB = 1011MB total
- [ 0.000000] Memory: 1011760k/1011760k available, 36816k reserved, 270336K highmem
- [ 0.000000] Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .text : 0xc0008000 - 0xc064bea8 (6416 kB)
- .init : 0xc064c000 - 0xc067c4fc ( 194 kB)
- .data : 0xc067e000 - 0xc06e0380 ( 393 kB)
- .bss : 0xc06e03a4 - 0xc0c13870 (5326 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS:474
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- [ 0.000000] Total of 96 interrupts on 1 active controller
- [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
- [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
- [ 0.000000] ... MAX_LOCK_DEPTH: 48
- [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
- [ 0.000000] ... CLASSHASH_SIZE: 4096
- [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
- [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
- [ 0.000000] ... CHAINHASH_SIZE: 16384
- [ 0.000000] memory used by lock dependency info: 3695 kB
- [ 0.000000] per task-struct memory footprint: 1152 bytes
- [ 0.000396] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
- [ 0.085906] pid_max: default: 32768 minimum: 301
- [ 0.086303] Security Framework initialized
- [ 0.086456] Mount-cache hash table entries: 512
- [ 0.090393] Initializing cgroup subsys cpuacct
- [ 0.090423] Initializing cgroup subsys memory
- [ 0.090637] Initializing cgroup subsys devices
- [ 0.090637] Initializing cgroup subsys freezer
- [ 0.090850] CPU: Testing write buffer coherency: ok
- [ 0.091674] Setting up static identity map for 0x80495270 - 0x804952c8
- [ 0.095001] devtmpfs: initialized
- [ 0.107849] dummy:
- [ 0.109497] NET: Registered protocol family 16
- [ 0.110717] GPMC revision 5.0
- [ 0.110931] gpmc: irq-20 could not claim: err -22
- [ 0.115264] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
- [ 0.115753] OMAP GPIO hardware version 2.5
- [ 0.116363] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
- [ 0.117370] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
- [ 0.118286] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
- [ 0.119201] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
- [ 0.120086] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
- [ 0.122650] RM-680/696 board, rev 1501
- [ 0.122680] omap_mux_init: Add partition: #1: core, flags: 0
- [ 0.126159] _omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx
- [ 0.127593] Reprogramming SDRC clock to 390400000 Hz
- [ 0.127960] wl1271 SDIO
- [ 0.133026] hw-breakpoint: debug architecture 0x4 unsupported.
- [ 0.139251] omap-mcbsp.2: alias fck already exists
- [ 0.139617] omap-mcbsp.3: alias fck already exists
- [ 0.141937] Reserving DMA channels 0 and 1 for HS ROM code
- [ 0.141967] OMAP DMA hardware revision 5.0
- [ 0.156463] bio: create slab <bio-0> at 0
- [ 0.158416] vwl1271: 1800 mV
- [ 0.159027] vbat: 3700 mV
- [ 0.159698] rm680_vemmc: 2900 mV normal standby
- [ 0.161010] SCSI subsystem initialized
- [ 0.161621] usbcore: registered new interface driver usbfs
- [ 0.161773] usbcore: registered new interface driver hub
- [ 0.162231] usbcore: registered new device driver usb
- [ 0.163055] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2900 kHz
- [ 0.170654] twl 1-0048: PIH (irq 7) chaining IRQs 320..328
- [ 0.171203] twl 1-0048: power (irq 325) chaining IRQs 328..335
- [ 0.173370] twl4030_gpio twl4030_gpio: gpio (irq 320) chaining IRQs 336..353
- [ 0.174438] gpiochip_add: registered GPIOs 192 to 209 on device: twl4030
- [ 0.176177] VUSB1V5: 1500 mV normal standby
- [ 0.177551] VUSB1V8: 1800 mV normal standby
- [ 0.178619] VUSB3V1: 3100 mV normal standby
- [ 0.182434] twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
- [ 0.183074] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
- [ 0.185211] rm696_vio: 1800 mV normal standby
- [ 0.186614] vdd_mpu_iva: 600 <--> 1450 mV normal
- [ 0.187713] vdd_core: 600 <--> 1450 mV normal
- [ 0.188751] VDAC: 1800 mV normal standby
- [ 0.189941] VPLL2: 1800 mV normal standby
- [ 0.191253] rm696_vmmc2: 3000 mV normal standby
- [ 0.192504] rm696_vaux1: 2800 mV normal standby
- [ 0.193725] rm696_vaux4: 2800 mV normal standby
- [ 0.194702] omap_i2c omap_i2c.2: bus 2 rev1.4.0 at 400 kHz
- [ 0.211181] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 400 kHz
- [ 0.212371] Linux video capture interface: v2.00
- [ 0.213317] omap-iommu omap-iommu.0: isp registered
- [ 0.213775] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.216125] Bluetooth: Core ver 2.16
- [ 0.216278] NET: Registered protocol family 31
- [ 0.216278] Bluetooth: HCI device and connection manager initialized
- [ 0.216369] Bluetooth: HCI socket layer initialized
- [ 0.216400] Bluetooth: L2CAP socket layer initialized
- [ 0.216491] Bluetooth: SCO socket layer initialized
- [ 0.216491] nfc: nfc_init: NFC Core ver 0.1
- [ 0.216735] NET: Registered protocol family 39
- [ 0.217498] Switching to clocksource 32k_counter
- [ 0.247406] NET: Registered protocol family 2
- [ 0.248046] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.249786] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.253479] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
- [ 0.293304] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.293426] TCP: reno registered
- [ 0.293457] UDP hash table entries: 512 (order: 3, 40960 bytes)
- [ 0.294097] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
- [ 0.295288] NET: Registered protocol family 1
- [ 0.298339] omap_dsp_init: 600000 bytes @ aec00000
- [ 0.302215] audit: initializing netlink socket (disabled)
- [ 0.302459] type=2000 audit(0.289:1): initialized
- [ 0.448028] highmem bounce pool size: 64 pages
- [ 0.473907] fuse init (API version 7.19)
- [ 0.477905] Btrfs loaded
- [ 0.477966] msgmni has been set to 1448
- [ 0.484924] io scheduler noop registered
- [ 0.484954] io scheduler deadline registered
- [ 0.485046] io scheduler cfq registered (default)
- [ 0.546051] OMAP DSS rev 2.0
- [ 0.546264] OMAP DISPC rev 3.0
- [ 0.546630] OMAP VENC rev 2
- [ 0.547302] OMAP DSI rev 1.0
- [ 0.563201] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.567413] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
- [ 0.568817] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
- [ 0.570068] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
- [ 0.571075] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
- [ 0.589324] brd: module loaded
- [ 0.599517] loop: module loaded
- [ 0.622711] lis3lv02d: 8 bits sensor found
- [ 0.679656] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input0
- [ 0.691040] OneNAND driver initializing
- [ 0.691650] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base f0040000, freq 83 MHz
- [ 0.692016] OneNAND Manufacturer: Samsung (0xec)
- [ 0.692016] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
- [ 0.692047] OneNAND version = 0x0232
- [ 0.692047] Chip support all block unlock
- [ 0.692047] Chip has 4KiB pagesize
- [ 0.692077] Chip has cache program feature
- [ 0.692108] Scanning device for bad blocks
- [ 0.704315] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x4f addr8 0x0
- [ 0.704345] OneNAND eraseblock 79 is an initial bad block
- [ 0.704437] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x50 addr8 0x0
- [ 0.704467] OneNAND eraseblock 80 is an initial bad block
- [ 0.705322] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x56 addr8 0x0
- [ 0.705322] OneNAND eraseblock 86 is an initial bad block
- [ 0.997283] 6 cmdlinepart partitions found on MTD device omap2-onenand
- [ 0.997283] Creating 6 MTD partitions on "omap2-onenand":
- [ 0.997314] 0x000000000000-0x000000100000 : "bootloader"
- [ 0.999511] 0x000000100000-0x0000003c0000 : "config"
- [ 1.000579] 0x0000003c0000-0x0000013c0000 : "kernel"
- [ 1.002288] 0x0000013c0000-0x0000015c0000 : "log"
- [ 1.005584] mtdoops: ready 28, 116 (no erase)
- [ 1.005584] mtdoops: Attached to MTD device 3
- [ 1.005615] 0x0000015c0000-0x00001e000000 : "var"
- [ 1.029663] 0x00001e000000-0x000020000000 : "moslo"
- [ 1.037353] tun: Universal TUN/TAP device driver, 1.6
- [ 1.037384] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.038330] usbcore: registered new interface driver asix
- [ 1.038452] usbcore: registered new interface driver cdc_ether
- [ 1.038604] usbcore: registered new interface driver smsc95xx
- [ 1.038696] usbcore: registered new interface driver net1080
- [ 1.038818] usbcore: registered new interface driver cdc_subset
- [ 1.038909] usbcore: registered new interface driver zaurus
- [ 1.039093] usbcore: registered new interface driver cdc_ncm
- [ 1.040008] usbcore: registered new interface driver cdc_wdm
- [ 1.040039] Initializing USB Mass Storage driver...
- [ 1.040191] usbcore: registered new interface driver usb-storage
- [ 1.040191] USB Mass Storage support registered.
- [ 1.040618] usbcore: registered new interface driver libusual
- [ 1.040649] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
- [ 1.048583] twl4030_usb twl4030_usb: twl4030_phy_resume
- [ 1.048919] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
- [ 1.048919] musb-hdrc: MHDRC RTL version 1.800
- [ 1.048950] musb-hdrc: setup fifo_mode 4
- [ 1.048950] musb-hdrc: 28/31 max ep, 16384/16384 memory
- [ 1.050781] musb-hdrc musb-hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92
- [ 1.052764] twl4030_usb twl4030_usb: twl4030_phy_suspend
- [ 1.069366] i2c-core: driver [atmel_mxt] using legacy suspend method
- [ 1.069396] i2c-core: driver [atmel_mxt] using legacy resume method
- [ 1.071136] input: twl4030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
- [ 1.073822] twl_rtc twl_rtc: Enabling TWL-RTC
- [ 1.078308] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- [ 1.079315] i2c /dev entries driver
- [ 1.081817] Driver for 1-wire Dallas network protocol.
- [ 1.086151] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- [ 1.087310] Bluetooth: HCI UART driver ver 2.2
- [ 1.087341] Bluetooth: HCI H4 protocol initialized
- [ 1.087341] Bluetooth: HCI BCSP protocol initialized
- [ 1.087371] Bluetooth: HCILL protocol initialized
- [ 1.087493] hci_h4p hci_h4p: Registering HCI H4P device
- [ 1.090240] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
- [ 1.092376] cpuidle: using governor ladder
- [ 1.092407] cpuidle: using governor menu
- [ 1.093505] omap_hsmmc omap_hsmmc.1: Failed to get debounce clk
- [ 1.140075] input: Atmel mXT Touchscreen as /devices/platform/omap_i2c.2/i2c-2/2-004b/input/input2
- [ 1.140960] atmel_mxt: Atmel mXT Touchscreen v1.6 (0x29b82f) var:0x1 bld:0xab
- [ 1.142486] omap_hsmmc omap_hsmmc.2: Failed to get debounce clk
- [ 1.194641] omap_sham_mod_init: loading omap-sham driver
- [ 1.194915] omap-sham omap-sham: hw accel on OMAP rev 0.9
- [ 1.197631] usbcore: registered new interface driver usbhid
- [ 1.197631] usbhid: USB HID core driver
- [ 1.210571] DSP Bridge driver loaded
- [ 1.212615] ashmem: initialized
- [ 1.213226] logger: created 256K log 'log_main'
- [ 1.213775] logger: created 256K log 'log_events'
- [ 1.214263] logger: created 256K log 'log_radio'
- [ 1.214752] logger: created 256K log 'log_system'
- [ 1.225982] ALSA SoC for TWL4030 on Nokia DFL61 init
- [ 1.289550] twl4030-codec twl4030-codec: ASoC: Failed to create Capture debugfs file
- [ 1.297668] asoc: twl4030-hifi <-> omap-mcbsp.3 mapping ok
- [ 1.302642] input: dfl61-twl4030 Jack as /devices/platform/dfl61audio-twl4030/sound/card0/input3
- [ 1.304351] mmc0: new high speed MMC card at address 0001
- [ 1.307800] DFL61 TWL SoC init done (config 4)
- [ 1.308197] ALSA for WL1273 on Nokia DFL61 init
- [ 1.308624] Error: -517
- [ 1.308685] platform dfl61audio-wl1273: Driver dfl61audio-wl1273 requests probe deferral
- [ 1.309020] ALSA for TLV320DAC33 on Nokia DFL61 init
- [ 1.310943] mmcblk0: mmc0:0001 MMC64G 59.7 GiB
- [ 1.311614] mmcblk0boot0: mmc0:0001 MMC64G partition 1 2.00 MiB
- [ 1.312530] mmcblk0boot1: mmc0:0001 MMC64G partition 2 2.00 MiB
- [ 1.318267] mmcblk0: p1 p2 p3 p4
- [ 1.325103] asoc: tlv320dac33-hifi <-> omap-mcbsp.2 mapping ok
- [ 1.330627] DFL61 TLV320DAC33 init done
- [ 1.330871] oprofile: hardware counters not available
- [ 1.330871] oprofile: using timer interrupt.
- [ 1.331176] mmcblk0boot1: unknown partition table
- [ 1.333251] TCP: cubic registered
- [ 1.333282] NET: Registered protocol family 17
- [ 1.333526] NET: Registered protocol family 15
- [ 1.335052] Bluetooth: RFCOMM TTY layer initialized
- [ 1.335144] Bluetooth: RFCOMM socket layer initialized
- [ 1.335144] Bluetooth: RFCOMM ver 1.11
- [ 1.335174] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 1.335174] Bluetooth: BNEP filters: protocol multicast
- [ 1.336120] Key type dns_resolver registered
- [ 1.336822] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 1.342773] mmcblk0boot0: unknown partition table
- [ 1.349578] mmc1: card claims to support voltages below the defined range. These will be ignored.
- [ 1.358215] sr_init: No PMIC hook to init smartreflex
- [ 1.358734] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
- [ 1.359405] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
- [ 1.359954] SmartReflex Class3 initialized
- [ 1.365081] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
- [ 1.367401] mmc1: new SDIO card at address 0001
- [ 1.394531] clock: disabling unused clocks to save power
- [ 1.484283] panel-nokia-dsi display0: pyrenees panel revision fe.91.96
- [ 1.488311] ALSA for WL1273 on Nokia DFL61 init
- [ 1.488769] Error: -517
- [ 1.488830] platform dfl61audio-wl1273: Driver dfl61audio-wl1273 requests probe deferral
- [ 1.492248] ALSA for WL1273 on Nokia DFL61 init
- [ 1.492462] Error: -517
- [ 1.492553] platform dfl61audio-wl1273: Driver dfl61audio-wl1273 requests probe deferral
- [ 1.493408] ALSA for WL1273 on Nokia DFL61 init
- [ 1.496276] asoc: wl1273-fm <-> omap-mcbsp.4 mapping ok
- [ 1.498291] ALSA device list:
- [ 1.498321] #0: dfl61-twl4030
- [ 1.498321] #1: dfl61-dac33
- [ 1.499176] Warning: unable to open an initial console.
- [ 1.501647] DFL61 WL1273 init done
- [ 1.522918] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
- [ 1.543212] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
- [ 1.543457] VFS: Mounted root (ext4 filesystem) on device 179:1.
- [ 1.553009] devtmpfs: mounted
- [ 1.553649] Freeing init memory: 192K
- [ 3.073822] systemd[1]: systemd 187 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP; other)
- [ 3.591033] NET: Registered protocol family 10
- [ 3.604034] systemd[1]: Inserted module 'ipv6'
- [ 3.606079] systemd[1]: No hostname configured.
- [ 3.606597] systemd[1]: Set hostname to <localhost>.
- [ 3.859771] systemd[1]: [/lib/systemd/system/boardname.service:10] Unknown lvalue 'ConditionFileNotEmpty' in section 'Unit'. Ignoring.
- [ 4.290313] systemd[1]: Cannot add dependency job for unit serial-getty@getty.service, ignoring: Unit serial-getty@getty.service failed to load: No such file or directory. See system logs and 'systemctl status serial-getty@getty.service' for details.
- [ 4.621337] systemd-readahead[88]: Failed to mark /: Invalid argument
- [ 4.782745] systemd-journald[93]: Fixed max_use=20.0M max_size=2.5M min_size=64.0K keep_free=24.7M
- [ 4.783538] systemd-journald[93]: Reserving 4551 entries in hash table.
- [ 4.786834] systemd-journald[93]: Vacuuming...
- [ 4.799560] systemd-udevd[91]: starting version 187
- [ 5.935729] SGX clock rate 195 MHz
- [ 6.550994] CMT driver
- [ 7.094268] input: SPI vibrator as /devices/platform/omap2_mcspi.2/spi_master/spi2/input4
- [ 7.107238] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
- [ 7.520233] systemd-journald[93]: Received SIGUSR1
- [ 7.942596] OMAP SSI hw driver loaded
- [ 9.048217] HSI/SSI char device loaded
- [ 9.114257] NET: Registered protocol family 35
- [ 9.151336] SSI protocol aka McSAAB added
- [ 12.154052] systemd-journald[93]: Journal file corrupted, rotating.
- [ 12.154083] systemd-journald[93]: Rotating...
- [ 12.154602] systemd-journald[93]: Reserving 4551 entries in hash table.
- [ 12.191864] systemd-journald[93]: Vacuuming...
- [ 12.192382] systemd-journald[93]: Retrying write.
- [ 12.669647] onenand_wait: correctable ECC error = 0x0001, addr1 0x4, addr8 0x10
- [ 12.687774] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0x3c
- [ 12.688446] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- [ 12.688537] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- [ 12.691070] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0xcc
- [ 13.090484] onenand_wait: correctable ECC error = 0x0001, addr1 0x4, addr8 0x10
- [ 13.091461] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0x3c
- [ 13.092102] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- [ 13.092224] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- [ 13.121368] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0xcc
- [ 13.320983] systemd[1]: Unit tohd.service entered failed state.
- [ 13.421356] systemd[1]: tohd.service holdoff time over, scheduling restart.
- [ 20.168273] cmt_speech cmt_speech: HSI port not initialized
- [ 20.168579] cmt_speech cmt_speech: Unable to initialize HSI
- [ 20.169128] cmt_speech cmt_speech: HSI port not initialized
- [ 20.169189] cmt_speech cmt_speech: Unable to initialize HSI
- [ 77.141632] pvr: lipstick: IOCTL 70 failed (13)
- [ 80.169891] cmt_speech cmt_speech: HSI port not initialized
- [ 80.170013] cmt_speech cmt_speech: Unable to initialize HSI
- [ 137.053436] cfg80211: Calling CRDA to update world regulatory domain
- [ 138.065887] wl12xx: loaded
- [ 140.042510] wl12xx: firmware booted (Rev 6.3.5.0.98)
- [ 140.084320] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 140.170928] cmt_speech cmt_speech: HSI port not initialized
- [ 140.171020] cmt_speech cmt_speech: Unable to initialize HSI
- [ 140.431060] onenand_wait: correctable ECC error = 0x0001, addr1 0x4, addr8 0x10
- [ 140.432067] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0x3c
- [ 140.433105] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- [ 140.433197] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- [ 140.435791] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0xcc
- [ 140.455902] onenand_wait: correctable ECC error = 0x0001, addr1 0x4, addr8 0x10
- [ 140.457183] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0x3c
- [ 140.457824] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- [ 140.457916] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- [ 140.460998] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0xcc
- [ 140.503997] onenand_wait: correctable ECC error = 0x0001, addr1 0x4, addr8 0x10
- [ 140.505035] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0x3c
- [ 140.505920] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- [ 140.506042] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- [ 140.508911] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0xcc
- [ 140.525604] onenand_wait: correctable ECC error = 0x0001, addr1 0x4, addr8 0x10
- [ 140.526611] onenand_wait: correctable ECC error = 0x0100, addr1 0x4, addr8 0x3c
- [ 140.527282] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- [ 140.527374] onenand_wait: ECC error = 0x0002, addr1 0x4, addr8 0x58
- [ 146.247070] wlan0: authenticate with 00:24:01:c9:48:b6
- [ 146.404571] wlan0: send auth to 00:24:01:c9:48:b6 (try 1/3)
- [ 146.422149] wlan0: authenticated
- [ 146.455261] wlan0: associate with 00:24:01:c9:48:b6 (try 1/3)
- [ 146.463562] wlan0: RX AssocResp from 00:24:01:c9:48:b6 (capab=0xc31 status=0 aid=1)
- [ 146.500457] unwind: Index not found bf143334
- [ 146.500549] unwind: Index not found bf143334
- [ 146.500579] unwind: Index not found bf143334
- [ 146.500732] unwind: Index not found bf143334
- [ 146.585388] unwind: Index not found bf1433a4
- [ 146.585510] unwind: Index not found bf1433a4
- [ 146.590087] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 146.596191] wlan0: associated
- [ 147.547210] wl12xx: Association completed.
- [ 169.581085] pvr: fingerterm: IOCTL 7 failed (1)
- [ 200.172119] cmt_speech cmt_speech: HSI port not initialized
- [ 200.172363] cmt_speech cmt_speech: Unable to initialize HSI
- [ 260.174468] cmt_speech cmt_speech: HSI port not initialized
- [ 260.174682] cmt_speech cmt_speech: Unable to initialize HSI
- [ 320.176818] cmt_speech cmt_speech: HSI port not initialized
- [ 320.177062] cmt_speech cmt_speech: Unable to initialize HSI
- [ 380.178985] cmt_speech cmt_speech: HSI port not initialized
- [ 380.179229] cmt_speech cmt_speech: Unable to initialize HSI
- [ 390.715881] wl12xx: Beacon loss detected.
- [ 391.002746] wl12xx: Beacon regained.
- [ 399.911499] wl12xx: Beacon regained.
- [ 402.594635] wl12xx: Beacon loss detected.
- [ 403.596435] wl12xx: Connection loss work.
- [ 403.596588] ======================================================
- [ 403.596618] [ INFO: possible circular locking dependency detected ]
- [ 403.596649] 3.5.3-00283-g190cb64-dirty #83 Not tainted
- [ 403.596679] -------------------------------------------------------
- [ 403.596679] kworker/u:4/482 is trying to acquire lock:
- [ 403.596710] (&wl->mutex){+.+.+.}, at: [<bf1718cc>] wl1271_connection_loss_work+0x20/0x7c [wlcore]
- [ 403.596923]
- but task is already holding lock:
- [ 403.596954] ((&(&wl->connection_loss_work)->work)){+.+...}, at: [<c0042aa4>] process_one_work+0x1d8/0x438
- [ 403.597045]
- which lock already depends on the new lock.
- [ 403.597045]
- the existing dependency chain (in reverse order) is:
- [ 403.597076]
- -> #1 ((&(&wl->connection_loss_work)->work)){+.+...}:
- [ 403.597137] [<c00619f0>] lock_acquire+0x60/0x74
- [ 403.597167] [<c0043980>] wait_on_work+0x3c/0xdc
- [ 403.597198] [<c0043ad4>] __cancel_work_timer+0xb4/0x100
- [ 403.597259] [<bf173178>] wl1271_op_bss_info_changed+0x620/0xb8c [wlcore]
- [ 403.597381] [<bf11d4c0>] ieee80211_bss_info_change_notify+0x150/0x170 [mac80211]
- [ 403.597656] [<bf143334>] ieee80211_assoc_success+0x3b4/0x568 [mac80211]
- [ 403.597839]
- -> #0 (&wl->mutex){+.+.+.}:
- [ 403.597900] [<c0060de4>] __lock_acquire+0xf3c/0x16f0
- [ 403.597930] [<c00619f0>] lock_acquire+0x60/0x74
- [ 403.597961] [<c048f3a0>] mutex_lock_nested+0x44/0x2fc
- [ 403.598022] [<bf1718cc>] wl1271_connection_loss_work+0x20/0x7c [wlcore]
- [ 403.598144] [<c0042b28>] process_one_work+0x25c/0x438
- [ 403.598175] [<c0042ed8>] worker_thread+0x1a8/0x2dc
- [ 403.598205] [<c00475ec>] kthread+0x80/0x90
- [ 403.598266] [<c000e10c>] kernel_thread_exit+0x0/0x8
- [ 403.598297]
- other info that might help us debug this:
- [ 403.598327] Possible unsafe locking scenario:
- [ 403.598358] CPU0 CPU1
- [ 403.598358] ---- ----
- [ 403.598388] lock((&(&wl->connection_loss_work)->work));
- [ 403.598419] lock(&wl->mutex);
- [ 403.598449] lock((&(&wl->connection_loss_work)->work));
- [ 403.598480] lock(&wl->mutex);
- [ 403.598510]
- *** DEADLOCK ***
- [ 403.598541] 2 locks held by kworker/u:4/482:
- [ 403.598571] #0: (wiphy_name(local->hw.wiphy)){.+.+.+}, at: [<c0042aa4>] process_one_work+0x1d8/0x438
- [ 403.598632] #1: ((&(&wl->connection_loss_work)->work)){+.+...}, at: [<c0042aa4>] process_one_work+0x1d8/0x438
- [ 403.598693]
- stack backtrace:
- [ 403.598754] [<c00124bc>] (unwind_backtrace+0x0/0xe0) from [<c0487a44>] (print_circular_bug+0x260/0x2ac)
- [ 403.598815] [<c0487a44>] (print_circular_bug+0x260/0x2ac) from [<c0060de4>] (__lock_acquire+0xf3c/0x16f0)
- [ 403.598846] [<c0060de4>] (__lock_acquire+0xf3c/0x16f0) from [<c00619f0>] (lock_acquire+0x60/0x74)
- [ 403.598907] [<c00619f0>] (lock_acquire+0x60/0x74) from [<c048f3a0>] (mutex_lock_nested+0x44/0x2fc)
- [ 403.599029] [<c048f3a0>] (mutex_lock_nested+0x44/0x2fc) from [<bf1718cc>] (wl1271_connection_loss_work+0x20/0x7c [wlcore])
- [ 403.599151] [<bf1718cc>] (wl1271_connection_loss_work+0x20/0x7c [wlcore]) from [<c0042b28>] (process_one_work+0x25c/0x438)
- [ 403.599212] [<c0042b28>] (process_one_work+0x25c/0x438) from [<c0042ed8>] (worker_thread+0x1a8/0x2dc)
- [ 403.599273] [<c0042ed8>] (worker_thread+0x1a8/0x2dc) from [<c00475ec>] (kthread+0x80/0x90)
- [ 403.599304] [<c00475ec>] (kthread+0x80/0x90) from [<c000e10c>] (kernel_thread_exit+0x0/0x8)
- [ 403.599517] wlan0: Connection to AP 00:24:01:c9:48:b6 lost.
- [ 403.662200] cfg80211: Calling CRDA for country: GB
- [ 403.779968] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 410.258270] pvr: fingerterm: IOCTL 7 failed (1)
- [ 440.180938] cmt_speech cmt_speech: HSI port not initialized
- [ 440.181121] cmt_speech cmt_speech: Unable to initialize HSI
- [ 500.182922] cmt_speech cmt_speech: HSI port not initialized
- [ 500.183074] cmt_speech cmt_speech: Unable to initialize HSI
- [ 518.861785] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 521.621948] wlan0: authenticate with 00:24:01:c9:48:b6
- [ 521.635375] wlan0: send auth to 00:24:01:c9:48:b6 (try 1/3)
- [ 521.835113] wlan0: send auth to 00:24:01:c9:48:b6 (try 2/3)
- [ 522.038177] wlan0: send auth to 00:24:01:c9:48:b6 (try 3/3)
- [ 522.241271] wlan0: authentication with 00:24:01:c9:48:b6 timed out
- [ 530.388641] wlan0: authenticate with 00:24:01:c9:48:b6
- [ 530.415374] wlan0: direct probe to 00:24:01:c9:48:b6 (try 1/3)
- [ 537.835021] pvr: fingerterm: IOCTL 7 failed (1)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement