Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- BusyBox v1.22.1 (2015-06-12 16:41:57 HKT) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- _____ _
- | __ \ (_)
- | | | | ___ _ __ ___ _ _ __ ___
- | | | | / _ \ | '_ ` _ \ | | | '_ \ / _ \
- | |__| | | (_) | | | | | | | | | | | | | | (_) |
- |_____/ \___/ |_| |_| |_| |_| |_| |_| \___/
- OpenWrt Wireless Freedom
- root@domino:/#
- root@domino:/# dmesg
- [ 0.000000] Linux version 3.10.49 (alzhao@alzhao-ubuntu) (gcc version 4.8.35
- [ 0.000000] MyLoader: sysp=d7d8d8f8, boardp=9d7ab07e, parts=dc7810fd
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
- [ 0.000000] SoC: Atheros AR9330 rev 1
- [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.z
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 04000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
- [ 0.000000] On node 0 totalpages: 16384
- [ 0.000000] free_area_init_node: node 0, pgdat 80338b60, node_mem_map 810000
- [ 0.000000] Normal zone: 128 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 3s
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total p6
- [ 0.000000] Kernel command line: board=DOMINO console=ttyATH0,115200 mtdpad
- [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Writing ErrCtl register=00000000
- [ 0.000000] Readback ErrCtl register=00000000
- [ 0.000000] Memory: 61076k/65536k available (2386k kernel code, 4460k reser)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS:51
- [ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
- [ 0.080000] pid_max: default: 32768 minimum: 301
- [ 0.080000] Mount-cache hash table entries: 512
- [ 0.090000] NET: Registered protocol family 16
- [ 0.100000] MIPS: machine is Domino board
- [ 0.550000] bio: create slab <bio-0> at 0
- [ 0.560000] Switching to clocksource MIPS
- [ 0.570000] NET: Registered protocol family 2
- [ 0.570000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
- [ 0.570000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.580000] TCP: Hash tables configured (established 512 bind 512)
- [ 0.580000] TCP: reno registered
- [ 0.580000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.590000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.600000] NET: Registered protocol family 1
- [ 0.600000] PCI: CLS 0 bytes, default 32
- [ 0.620000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.630000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIOR.
- [ 0.640000] msgmni has been set to 119
- [ 0.640000] io scheduler noop registered
- [ 0.640000] io scheduler deadline registered (default)
- [ 0.650000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
- [ 0.660000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X T
- [ 0.670000] console [ttyATH0] enabled, bootconsole disabled
- [ 0.680000] ath79-spi ath79-spi: master is unqueued, this is deprecated
- [ 0.690000] m25p80 spi0.0: found w25q128, expected m25p80
- [ 0.690000] m25p80 spi0.0: w25q128 (16384 Kbytes)
- [ 0.700000] 4 cmdlinepart partitions found on MTD device spi0.0
- [ 0.710000] Creating 4 MTD partitions on "spi0.0":
- [ 0.710000] 0x000000000000-0x000000040000 : "u-boot"
- [ 0.720000] 0x000000040000-0x000000050000 : "u-boot-env"
- [ 0.720000] 0x000000050000-0x000000ff0000 : "firmware"
- [ 0.740000] 2 uimage-fw partitions found on MTD device firmware
- [ 0.750000] 0x000000050000-0x000000170000 : "kernel"
- [ 0.750000] 0x000000170000-0x000000ff0000 : "rootfs"
- [ 0.760000] mtd: device 4 (rootfs) set to be root filesystem
- [ 0.760000] 1 squashfs-split partitions found on MTD device rootfs
- [ 0.770000] 0x000000930000-0x000000ff0000 : "rootfs_data"
- [ 0.780000] 0x000000ff0000-0x000001000000 : "art"
- [ 0.800000] libphy: ag71xx_mdio: probed
- [ 1.350000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004d]
- [ 1.360000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
- [ 1.920000] ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch
- [ 2.950000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
- [ 2.960000] TCP: cubic registered
- [ 2.960000] NET: Registered protocol family 17
- [ 2.960000] Bridge firewalling registered
- [ 2.970000] 8021q: 802.1Q VLAN Support v1.8
- [ 2.980000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
- [ 2.980000] Freeing unused kernel memory: 256K (80350000 - 80390000)
- [ 7.310000] usbcore: registered new interface driver usbfs
- [ 7.320000] usbcore: registered new interface driver hub
- [ 7.320000] usbcore: registered new device driver usb
- [ 7.410000] SCSI subsystem initialized
- [ 7.420000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 7.430000] ehci-platform: EHCI generic platform driver
- [ 7.430000] ehci-platform ehci-platform: EHCI Host Controller
- [ 7.440000] ehci-platform ehci-platform: new USB bus registered, assigned b1
- [ 7.450000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
- [ 7.470000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
- [ 7.470000] hub 1-0:1.0: USB hub found
- [ 7.470000] hub 1-0:1.0: 1 port detected
- [ 7.480000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 7.490000] uhci_hcd: USB Universal Host Controller Interface driver
- [ 7.500000] usbcore: registered new interface driver usb-storage
- [ 11.780000] jffs2: notice: (352) jffs2_build_xattr_subsystem: complete buil.
- [ 11.790000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
- [ 11.800000] block: unable to load configuration (fstab: Entry not found)
- [ 11.810000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
- [ 11.820000] block: extroot: not configured
- [ 11.860000] jffs2: notice: (349) jffs2_build_xattr_subsystem: complete buil.
- [ 12.070000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
- [ 12.080000] block: unable to load configuration (fstab: Entry not found)
- [ 12.080000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
- [ 12.100000] block: extroot: not configured
- [ 16.390000] NET: Registered protocol family 10
- [ 16.440000] NTFS driver 2.1.30 [Flags: R/O MODULE].
- [ 16.490000] loop: module loaded
- [ 16.600000] nf_conntrack version 0.5.0 (958 buckets, 3832 max)
- [ 16.620000] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 16.650000] Linux video capture interface: v2.00
- [ 16.690000] fuse init (API version 7.22)
- [ 16.710000] usbcore: registered new interface driver cdc_acm
- [ 16.710000] cdc_acm: USB Abstract Control Model driver for USB modems and Is
- [ 16.730000] Loading modules backported from Linux version master-2014-05-22a
- [ 16.730000] Backport generated by backports.git backports-20140320-37-g5c330
- [ 16.750000] gspca_main: v2.14.0 registered
- [ 16.770000] usbcore: registered new interface driver sonixb
- [ 16.770000] usbcore: registered new interface driver sonixj
- [ 16.790000] usbcore: registered new interface driver gspca_zc3xx
- [ 16.810000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 16.890000] usbcore: registered new interface driver usbserial
- [ 16.890000] usbcore: registered new interface driver usbserial_generic
- [ 16.910000] usbserial: USB Serial support registered for generic
- [ 16.930000] usbcore: registered new interface driver uvcvideo
- [ 16.930000] USB Video Class driver (1.1.1)
- [ 16.980000] xt_time: kernel timezone is -0000
- [ 16.980000] usbcore: registered new interface driver cdc_ether
- [ 17.040000] cfg80211: Calling CRDA to update world regulatory domain
- [ 17.040000] cfg80211: World regulatory domain updated:
- [ 17.050000] cfg80211: DFS Master region: unset
- [ 17.050000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_g)
- [ 17.060000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000)
- [ 17.070000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000)
- [ 17.080000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000)
- [ 17.090000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 200)
- [ 17.090000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 200)
- [ 17.100000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 200)
- [ 17.110000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000)
- [ 17.120000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, )
- [ 17.130000] usbcore: registered new interface driver cp210x
- [ 17.130000] usbserial: USB Serial support registered for cp210x
- [ 17.260000] PPP generic driver version 2.4.2
- [ 17.270000] NET: Registered protocol family 24
- [ 17.290000] usbcore: registered new interface driver rndis_host
- [ 17.370000] usbcore: registered new interface driver option
- [ 17.390000] usbserial: USB Serial support registered for GSM modem (1-port)
- [ 17.420000] ath: EEPROM regdomain: 0x0
- [ 17.420000] ath: EEPROM indicates default country code should be used
- [ 17.420000] ath: doing EEPROM country->regdmn map search
- [ 17.420000] ath: country maps to regdmn code: 0x3a
- [ 17.420000] ath: Country alpha2 being used: US
- [ 17.420000] ath: Regpair used: 0x3a
- [ 17.440000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 17.440000] cfg80211: Calling CRDA for country: US
- [ 17.450000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
- [ 17.460000] cfg80211: Regulatory domain changed to country: US
- [ 17.460000] cfg80211: DFS Master region: FCC
- [ 17.460000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_g)
- [ 17.470000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000)
- [ 17.480000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700)
- [ 17.490000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300)
- [ 17.500000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000)
- [ 17.510000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, )
- [ 32.580000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 32.580000] device eth1 entered promiscuous mode
- [ 32.590000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
- [ 32.620000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 35.770000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 35.780000] device wlan0 entered promiscuous mode
- [ 35.780000] br-lan: port 2(wlan0) entered forwarding state
- [ 35.780000] br-lan: port 2(wlan0) entered forwarding state
- [ 35.870000] br-lan: port 2(wlan0) entered disabled state
- [ 38.330000] warning: `alljoyn-daemon' uses 32-bit capabilities (legacy supp)
- [ 42.810000] br-lan: port 2(wlan0) entered forwarding state
- [ 42.810000] br-lan: port 2(wlan0) entered forwarding state
- [ 42.820000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 42.840000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
- [ 44.810000] br-lan: port 2(wlan0) entered forwarding state
- [ 97.440000] device wlan0 left promiscuous mode
- [ 97.440000] br-lan: port 2(wlan0) entered disabled state
- [ 104.520000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 104.550000] device wlan0 entered promiscuous mode
- [ 111.210000] br-lan: port 2(wlan0) entered forwarding state
- [ 111.210000] br-lan: port 2(wlan0) entered forwarding state
- [ 111.220000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 113.210000] br-lan: port 2(wlan0) entered forwarding state
- [ 121.420000] device wlan0 left promiscuous mode
- [ 121.420000] br-lan: port 2(wlan0) entered disabled state
- [ 122.020000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 122.070000] device wlan0 entered promiscuous mode
- [ 122.070000] br-lan: port 2(wlan0) entered forwarding state
- [ 122.070000] br-lan: port 2(wlan0) entered forwarding state
- [ 122.420000] br-lan: port 2(wlan0) entered disabled state
- [ 128.750000] br-lan: port 2(wlan0) entered forwarding state
- [ 128.760000] br-lan: port 2(wlan0) entered forwarding state
- [ 128.760000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 130.760000] br-lan: port 2(wlan0) entered forwarding state
- [ 152.810000] device wlan0 left promiscuous mode
- [ 152.810000] br-lan: port 2(wlan0) entered disabled state
- [ 164.290000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 164.300000] device wlan0 entered promiscuous mode
- [ 171.020000] br-lan: port 2(wlan0) entered forwarding state
- [ 171.030000] br-lan: port 2(wlan0) entered forwarding state
- [ 171.030000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 173.030000] br-lan: port 2(wlan0) entered forwarding state
- [ 181.230000] device wlan0 left promiscuous mode
- [ 181.230000] br-lan: port 2(wlan0) entered disabled state
- [ 181.840000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 181.860000] device wlan0 entered promiscuous mode
- [ 181.860000] br-lan: port 2(wlan0) entered forwarding state
- [ 181.870000] br-lan: port 2(wlan0) entered forwarding state
- [ 182.230000] br-lan: port 2(wlan0) entered disabled state
- [ 188.590000] br-lan: port 2(wlan0) entered forwarding state
- [ 188.590000] br-lan: port 2(wlan0) entered forwarding state
- [ 188.600000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 190.590000] br-lan: port 2(wlan0) entered forwarding state
- [ 206.530000] device wlan0 left promiscuous mode
- [ 206.530000] br-lan: port 2(wlan0) entered disabled state
- [ 243.450000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 243.480000] device wlan0 entered promiscuous mode
- [ 250.130000] br-lan: port 2(wlan0) entered forwarding state
- [ 250.140000] br-lan: port 2(wlan0) entered forwarding state
- [ 250.140000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 252.140000] br-lan: port 2(wlan0) entered forwarding state
- [ 258.900000] device wlan0 left promiscuous mode
- [ 258.900000] br-lan: port 2(wlan0) entered disabled state
- [ 260.920000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 260.960000] device wlan0 entered promiscuous mode
- [ 267.610000] br-lan: port 2(wlan0) entered forwarding state
- [ 267.620000] br-lan: port 2(wlan0) entered forwarding state
- [ 267.620000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 269.620000] br-lan: port 2(wlan0) entered forwarding state
- [ 277.820000] device wlan0 left promiscuous mode
- [ 277.820000] br-lan: port 2(wlan0) entered disabled state
- [ 278.440000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 278.460000] device wlan0 entered promiscuous mode
- [ 278.460000] br-lan: port 2(wlan0) entered forwarding state
- [ 278.460000] br-lan: port 2(wlan0) entered forwarding state
- [ 278.820000] br-lan: port 2(wlan0) entered disabled state
- [ 285.150000] br-lan: port 2(wlan0) entered forwarding state
- [ 285.150000] br-lan: port 2(wlan0) entered forwarding state
- [ 285.160000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 287.150000] br-lan: port 2(wlan0) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement